Answer: Carbon Monoxide (CO), Sulfur Dioxide (SO2), and Nitrogen Dioxide(NO2).
Explanation:
Exposure to these noxious gases severely affects the respiratory system of an individual thus deteriorating his health. Pneumonia and Bronchitis are the tips of an iceberg among various diseases and prolonged illnesses.
A 2 kg block of which material would require about 258 joules of thermal energy to increase its temperature by 1°c?.
The material with a specific heat capacity of approximately 129 J/kg°C would require about 258 joules of thermal energy to increase its temperature by 1°C.
To determine the specific heat capacity of a material, which represents the amount of thermal energy required to raise the temperature of a given mass of the material by 1°C, we can use the formula:
Q = mcΔT
where:
Q is the thermal energy in joules,
m is the mass of the material in kilograms,
c is the specific heat capacity of the material in joules per kilogram per degree Celsius (J/kg°C), and
ΔT is the change in temperature in degrees Celsius.
In this case, we know the mass of the block is 2 kg, the change in temperature is 1°C, and we need to find the specific heat capacity.
Let's rearrange the formula to solve for c:
c = Q / (mΔT)
Substituting the given values:
c = 258 J / (2 kg * 1°C)
c ≈ 129 J/kg°C
Therefore, the material with a specific heat capacity of approximately 129 J/kg°C would require about 258 joules of thermal energy to increase its temperature by 1°C.
Learn more about specific heat capacity from the link given below.
https://brainly.com/question/15592765
#SPJ4
24 mL of benzaldehyde (MW = 106 g/mol, d=1.04 g/mL) was treated with 1 g potassium cyanide (65.12 g/mol) under reflux to yield 25 g of benzoin (212 g/mol). What was the limiting reagent in this reaction?
In the given reaction, benzaldehyde and potassium cyanide are the reactants. To determine the limiting reagent, we need to compare the number of moles of each reactant and identify the one that is completely consumed.
To find the limiting reagent, we can use the molar ratio between benzaldehyde and benzoin.
First, we calculate the number of moles of benzaldehyde:
moles of benzaldehyde = (volume of benzaldehyde in mL) x (density of benzaldehyde in g/mL) / (molecular weight of benzaldehyde in g/mol)
moles of benzaldehyde = (24 mL) x (1.04 g/mL) / (106 g/mol)
Next, we calculate the number of moles of potassium cyanide:
moles of potassium cyanide = (mass of potassium cyanide in g) / (molecular weight of potassium cyanide in g/mol)
moles of potassium cyanide = 1 g / 65.12 g/mol
Now, we compare the moles of benzaldehyde and potassium cyanide to determine the limiting reagent. The reactant that produces fewer moles of benzoin is the limiting reagent.
Finally, we can calculate the number of moles of benzoin that can be produced from each reactant by using the stoichiometric ratio of the balanced equation. The limiting reagent will be the one that produces the smaller amount of benzoin.
Based on the calculations, we can determine which reactant is the limiting reagent in this reaction.
Learn more about benzaldehyde here:
https://brainly.com/question/29754365
#SPJ11
Four materials, A, B, C, and D with contact angles 0,30,60 and 120 degrees respectively were used to make capillaries for measuring surface tension of aqueous solutions. Which one of these will show a capillary depression instead of a capillary rise> O B O C O D O A
Material A will show a capillary depression instead of a capillary rise if Four materials, A, B, C, and D with contact angles 0,30,60 and 120 degrees respectively were used to make capillaries for measuring surface tension of aqueous solutions.
What exactly does "contact angle" mean?
The wetting of a solid by a liquid is measured quantitatively by the contact angle. The contact angle is the angle created by a liquid at the intersection of a liquid, gas, and solid at a three-phase boundary.
The following describes how capillary effect and contact angle are related: If the contact angle is smaller than, liquid will soak the surface. If the contact angle is greater than that, liquid cannot moisten the surface. The liquid level will have lowered the capillary tube.
To learn more about contact angle :
https://brainly.com/question/13105337
#SPJ4
As we look around space we find that most of it is composed of (4). hydrogen combines with carbon which is the basis for all living things. Combining different (6). A group of two or more atoms that are bonded together is called a (7). are combined in a specific way, or ratio, the substance is called a (8). of hydrogen. When the forms a (5)_ 7. together form different substances. 8. _. And when the elements (e.g. water).
As we look around space, we find that most of it is composed of atoms of hydrogen. When the hydrogen combines with carbon, it forms an organic molecule. Which is the basis for all living things. Combining different elements together form different substances. A group of two or more atoms that are bonded together is called a molecule. And when the elements are combined in a specific way, or ratio, the substance is called a compound (e.g. water).
A pure material with only one type of atom makes up an element. A molecule is a pure material that contains either only one kind of atoms or atoms from many types of atoms.
Learn more about atoms, here:
https://brainly.com/question/4979095
#SPJ1
The given question is incomplete, so the most probable complete question is,
As we look around space we find that most of it is composed of ___. of hydrogen. When the hydrogen combines with carbon it forms a ___. which is the basis for all living things. Combining different ___ together form different substances. A group of two or more atoms that are bonded together is called a __. And when the elements are combined in a specific way, or ratio, the substance is called a ___ (e.g. water).
what is the process whereby a hydroxyl group (-oh) is removed from one molecule and a hydrogen ion (h ) from another molecule, bonding the two molecules together and forming a molecule of water?
Dehydration synthesis is the process in which a hydroxyl group (-OH) is removed from one molecule and a hydrogen ion (H+) from another molecule, resulting in the formation of a covalent bond between the two molecules and the production of a water molecule (H2O).
The process you are referring to is called dehydration synthesis, also known as condensation reaction. It involves the removal of a hydroxyl group (-OH) from one molecule and a hydrogen ion (H+) from another molecule, leading to the formation of a covalent bond between the two molecules and the production of a molecule of water (H2O).
During dehydration synthesis, the hydroxyl group from one molecule and the hydrogen ion from another molecule combine to form a water molecule, while the remaining functional groups or atoms in the molecules bond together to form a larger molecule.
Learn more about "condensation reaction" here.brainly.com/question/30395126
#SPJ11
An economist would calculate Ziva's total cost for the day of farming to equal a. $380. b. $130. c. $250. d. $300.
Ziva's total cost for the day of farming. Without additional details, it is not possible to determine the correct answer among the given options (a. $380, b. $130, c. $250, d. $300).
To calculate Ziva's total cost for the day of farming, specific information about the costs incurred during the day is needed. Total cost includes various factors such as labor, equipment, materials, and overhead expenses. Each of these elements contributes to the overall cost. Without a breakdown of these costs or any other relevant information, it is not possible to ascertain the correct answer among the provided options. To determine the accurate total cost, it is necessary to consider the specific costs associated with Ziva's farming activities and any associated expenses incurred during the day.
Learn more about cost herel
https://brainly.com/question/14586830
#SPJ11
A stream's discharge is: Group of answer choices the volume of water passing a fixed point per unit time
A stream's discharge refers to the volume of water passing a fixed point per unit time.
Discharge is an important characteristic of a stream because it helps to determine the flow rate of water and how much water is being transported downstream.
Discharge can be affected by various factors such as the size and shape of the stream channel, the slope of the stream bed, and the amount of precipitation and runoff in the area. Measuring discharge can be done through various methods such as stream gauging and velocity-area methods.
To Know more volume visit;
https://brainly.com/question/29150741
#SPJ11
which of the following statements explains which trial has a higher concentration of the reactant? trial 1, because the final amount of product formed is higher. trial 1, because this reaction lasted for a longer duration than trial 2. trial 2, because this reaction was initially fast and slowed down later. trial 2, because the amount of product formed per unit time is higher.
The statement that correctly explains which trial has a higher concentration of the reactant is:
Trial 2, because the amount of product formed per unit time is higher. Option C is correct.In a chemical reaction, the rate of consumption of reactants and the rate of formation of products are related. If Trial 2 has a higher rate of product formation per unit time compared to Trial 1, it indicates that the reactant is being consumed at a faster rate in Trial 2.
The concentration of a reactant decreases as the reaction proceeds, and a higher rate of product formation suggests a higher rate of reactant consumption. This implies that Trial 2, with a higher rate of product formation per unit time, has a higher concentration of the reactant.
The final amount of product formed or the duration of the reaction does not directly determine the concentration of the reactant. The concentration is more closely related to the rate at which the product is formed. Option C is correct.
To know more about the Reaction, here
https://brainly.com/question/30849305
#SPJ4
which energy yield is likely to have come from a fission or fusion reaction?
The energy yield likely to have come from a fusion reaction is greater than that from a fission reaction.
Fusion reactions, which involve combining light atomic nuclei (e.g., hydrogen) to form heavier nuclei (e.g., helium), release more energy per reaction than fission reactions, where heavy nuclei (e.g., uranium) split into lighter nuclei.
Fusion has a higher energy yield due to the strong nuclear force binding the lighter nuclei together, releasing vast amounts of energy. In contrast, fission releases energy by breaking the strong nuclear force in heavier nuclei.
Fusion is the process powering stars like our sun, producing enormous amounts of energy. However, achieving controlled fusion on Earth remains a challenge, while fission has been harnessed in nuclear power plants for decades. Overall, nuclear force have a higher energy yield than fission reactions.
To know more about nuclear force click on below link:
https://brainly.com/question/9750022#
#SPJ11
cost of Materials Used $40,000 Direct Labor costs $55,000 Factory Overhead $32,000 Work in Process, beg. $28,000 Work in Process, end. $18,000 What is Cost of Goods Manufactured
If the cost of Materials used $40,000 Direct Labor costs $55,000 , the cost of goods manufactured is $ 137,000.
Option D is correct.
COGM = COMU+ DL+ FO+ BWIP- EWIP
= ($40,000+$55,000+$32,000+$28,000 - ($18,000)
= $137,000
All of the costs associated with producing a product—direct labor, indirect labor, raw materials, and overhead expenses—are referred to as the cost of goods manufactured (COGM). COGM is a valuable bookkeeping metric since it very well may be utilized to quantify the exhibition of creation and assembling costs with target costs.
Factory overhead :Plant above, likewise called fabricating above or work above, or production line trouble in American English, is the all out cost engaged with working all creation offices of an assembling business that can't be followed straightforwardly to an item. It by and large applies to roundabout work and circuitous expense.
Incomplete question:
Cost of Materials Used $40,000
Direct Labor costs $55,000
Factory Overhead $32,000
Work in Process, beg. $28,000
Work in Process, end. $18,000
What is Cost of Goods Manufactured?
a. $173,000
b. $97,000
c. $117,000
d. $137,000
Learn more about Factory Overhead:
brainly.com/question/32451356
#SPJ4
A product line is defined as Group of answer choices products that can be designated as a unique offering among the organization's products. a specific group of products that are offered to the market. a group of closely related products that are considered a unit because of marketing, technical, or end-use considerations. products that are sold by the same firm or a division of a firm. products that an organization makes available to consumers.
A product line is a group of closely related products that are considered a unit because of marketing, technical, or end-use considerations. It is a specific group of products that are offered to the market by an organization. These products are sold by the same firm or a division of a firm and are made available to consumers.
The purpose of a product line is to offer consumers a range of choices that meet their specific needs or preferences. By grouping similar products together, organizations can better target their marketing efforts and develop specialized expertise in a particular area. For example, a clothing retailer may have a product line that includes casual wear, athletic wear, and formal wear.
Organizations can also use product lines to streamline their operations and reduce costs. By using common components or production processes across a product line, they can take advantage of economies of scale and reduce the costs associated with research and development, marketing, and distribution. In summary, a product line is a strategic approach to product development and marketing that allows organizations to offer a range of products that meet specific customer needs, while also optimizing their operations and reducing costs.
Learn more about production processes here-
https://brainly.com/question/31310887
#SPJ11
When deciding whether to produce in the long run, the firm should consider whether average _____ is greater than average total cost.
When deciding whether to produce in the long run, the firm should consider whether average revenue is greater than average total cost.
In the long run, a firm's decision to produce is based on its ability to cover all costs and generate a profit. Average revenue represents the per-unit revenue earned by the firm, which is calculated by dividing total revenue by the quantity of output. Average total cost, on the other hand, represents the per-unit cost incurred by the firm, calculated by dividing total cost by the quantity of output.
If average revenue is greater than average total cost, it means that the firm is generating more revenue per unit than it is incurring in costs. This suggests that the firm is profitable and should continue producing in the long run. However, if average revenue is less than average total cost, it means that the firm is not covering its costs with the revenue generated per unit. In this case, the firm may need to reassess its production decisions and consider adjustments such as reducing costs or increasing prices to improve profitability.
Learn more about production here:
https://brainly.com/question/30051683
#SPJ11
Which of the following is NOT a monetary policy tool of the Federal Reserve System A. Discount rate. B. Buying and selling U.S. government securities. C. Deposit insurance. D. The required reserve ratio.
Deposit insurance is NOT a monetary policy tool of the Federal Reserve System. So the correct option is (C).
System, in a general sense, refers to a set of interconnected components or elements that function together to achieve a particular purpose or goal. It can be a physical arrangement of parts or a conceptual framework. Systems can exist in various domains, such as computer systems, biological systems, economic systems, or social systems. They are characterized by inputs, processes, outputs, and feedback loops. Systems can be complex and dynamic, and understanding their behavior and interactions is crucial for effective management, optimization, and problem-solving in a wide range of disciplines and industries.
Learn more about System here:
https://brainly.com/question/23117865
#SPJ11
Because we as human beings spend a good deal of our time interacting with other people is ____ it is natural that we develop hypotheses about social behavior.
As humans frequently engage with others, it is natural for us to form hypotheses about social behavior.
Human beings are inherently social creatures, constantly interacting with one another in various contexts. This continuous engagement with others allows us to observe and analyze different patterns of social behavior, leading us to develop hypotheses.
These hypotheses serve as our attempts to explain and understand the intricacies of human interactions. We observe how people communicate, cooperate, compete, and form relationships, and based on these observations, we formulate theories about why certain behaviors occur and how they impact individuals and society.
These hypotheses about social behavior are valuable because they enable us to make predictions, test our assumptions, and gain a deeper understanding of human interactions.
Through scientific research, empirical evidence, and rigorous analysis, we can refine and validate these hypotheses, contributing to the field of social sciences. Furthermore, these hypotheses foster critical thinking and intellectual curiosity, encouraging us to explore and question the complexities of human behavior.
Learn more about social behavior here
https://brainly.com/question/3126488
#SPJ11
N2(g) + 3 H2(g) <—> 2 NH3(g)
DH = −92 kJ/mol ; DG = -33 kJ/mol
Consider the reaction represented above at 298 K. When equal volumes of N2(g) and H2(g), each at 1 atm, are mixed in a closed container at 298 K, no formation of NH3(g) is observed. Which of the following best explains the observation?
(A) The N2(g) and the H2(g) must be mixed in a 1:3 ratio for a reaction to occur.
(B) A high activation energy makes the forward reaction extremely slow at 298 K.
(C) The reaction has an extremely small equilibrium constant, thus almost no product will form.
(D) The reverse reaction has a lower activation energy than the forward reaction, so the forward reaction does not occur.
The equilibrium constant (K) for the given reaction, N2(g) + 3 H2(g) ↔ 2 NH3(g), is extremely small, indicating that very little NH3 is produced. This is due to the reverse reaction having a lower activation energy than the forward reaction.
In this **chemical reaction**, nitrogen (N2) and hydrogen (H2) gases combine to form ammonia (NH3) gas. The **equilibrium constant (K)** is a measure of the ratio of product concentration to reactant concentration at equilibrium. When K is very small, it means that the concentration of reactants is much higher than that of products, suggesting that the reaction does not favor the formation of NH3. The **activation energy** is the minimum amount of energy required for a reaction to proceed. Since the reverse reaction (breaking down NH3 into N2 and H2) has a lower activation energy than the forward reaction (forming NH3 from N2 and H2), it is easier for the reaction to proceed in the reverse direction, further limiting the amount of NH3 formed.
Know more about equilibrium constant here:
https://brainly.com/question/29809185
#SPJ11
a conjugate base is the species that group of answer choices remains after a base has given up a proton. is formed by the addition of a proton. is formed by the addition of a proton to a base.
The correct statement among the given options is:
A conjugate base is the species that remains after a base has given up a proton.
In the context of acid-base chemistry, a conjugate base is the species that remains after a base donates or gives up a proton (H+). When a base loses a proton, it transforms into its conjugate base, which is the species with one less proton compared to the original base.
For example, in the reaction between the base ammonia (NH3) and an acid, NH3 acts as a base and accepts a proton (H+), resulting in the formation of its conjugate acid, ammonium ion (NH4+). NH3 is the base, and NH4+ is its conjugate acid.
Therefore, the correct statement is that a conjugate base is the species that remains after a base has given up a proton.
Learn more about "conjugate base" here: brainly.com/question/30086613
#SPJ11
the subatomic particle found in the nucleus of an atom that is basically a proton/electron pair is called
The subatomic particle found in the nucleus of an atom that is basically a proton/electron pair is called neutron.
What is a neutron?A neutron is a subatomic particle that is found in the nucleus of an atom. A neutron is a subatomic particle that has a neutral charge, meaning it has no charge. The neutron has a slightly larger mass than a proton, which is also found in the nucleus of an atom.
A neutron is an important subatomic particle because it helps to hold the nucleus of an atom together. Neutrons are attracted to the positively charged protons in the nucleus of an atom, and this attraction helps to keep the nucleus from breaking apart.
Learn more about atoms at:
https://brainly.com/question/6339254
#SPJ11
an endothermic reaction feels cold to the touch because the reaction (acting here as the system) blank the surroundings. when you touch the vessel in which the reaction occurs, you, being part of the surroundings, blank heat to the system (the reaction), which makes you feel cold. the heat absorbed by the reaction (from your body, in this case) blank its temperature, but rather becomes potential energy stored in chemical bonds.
An endothermic reaction feels cold to the touch because the reaction absorbs heat from its surroundings. When you touch the vessel in which the reaction occurs, you, as part of the surroundings, transfer heat to the system, which makes you feel cold.
The heat absorbed by the reaction does not increase its temperature but rather becomes potential energy stored in chemical bonds. In an endothermic reaction, energy is required to break the existing bonds in the reactants, and this energy is absorbed from the surroundings. As a result, the surroundings lose heat, leading to a decrease in temperature. When you touch the vessel, heat is transferred from your body to the system, further contributing to the cooling effect. However, this heat does not raise the temperature of the reaction itself but instead becomes potential energy, stored in the newly formed bonds of the products. Therefore, the sensation of coldness when touching an endothermic reaction vessel is due to the heat transfer from your body, which is utilized to fuel the energy requirements of the reaction, rather than directly increasing the reaction's temperature.
For more such questions on endothermic reactions
https://brainly.com/question/1160007
#SPJ8
According to the brřnsted–lowry definition of acids-base reaction, acids have the ability to:.
Acids, according to the Brønsted-Lowry definition, have the ability to donate protons.
According to the Brønsted-Lowry definition of acids and bases, acids have the ability to donate protons (H+ ions). In other words, acids are substances that can release hydrogen ions when dissolved in water or in an aqueous solution. This definition focuses on the transfer of protons from acids to bases during acid-base reactions.
Acids can donate protons to bases, which are substances that can accept protons. The transfer of a proton from an acid to a base forms a conjugate base (the species that remains after the acid has donated its proton) and a conjugate acid (the species that forms when the base accepts the proton).
Therefore, according to the Brønsted-Lowry acids, have the ability to donate protons.
The given question is incomplete the completed question is given as,
Fill in the blanks: According to the Bronsted–lowry definition of acids-base reaction, acids have the ability to -------------------------------------.
Learn more about Brønsted-Lowry acids from the link given below.
https://brainly.com/question/32276007
#SPJ4
if a reaction solution is made up by mixing 5.0 ml of 0.0020 m fe(no3)3 ' 3.0 ml of 0.0020 m hscn, and 2.0 ml of 0.50 m hno3, the concentration of fe(no3)3 after mixing will be
After mixing 5.0 mL of 0.0020 M Fe(NO3)3, 3.0 mL of 0.0020 M HSCN, and 2.0 mL of 0.50 M HNO3, the concentration of Fe(NO3)3 will be 0.0010 M.
To find the concentration of Fe(NO3)3 after mixing, we need to calculate the total volume of the solution and the number of moles of Fe(NO3)3 present. The total volume of the solution is the sum of the volumes of the individual solutions: 5.0 mL + 3.0 mL + 2.0 mL = 10.0 mL.
First, let's calculate the moles of Fe(NO3)3:
moles of Fe(NO3)3 = volume of Fe(NO3)3 solution × concentration of Fe(NO3)3
= 5.0 mL × 0.0020 M
= 0.01 mmol (millimoles)
Since the volume is given in milliliters and the concentration is in moles per liter, we converted the volume to liters by dividing by 1000.
Now, let's calculate the final concentration of Fe(NO3)3:
concentration of Fe(NO3)3 = moles of Fe(NO3)3 / total volume of the solution
= 0.01 mmol / 10.0 mL
= 0.0010 M
Therefore, the concentration of Fe(NO3)3 after mixing will be 0.0010 M.
To know more about volume click here: brainly.com/question/32246847
#SPJ11
Abc makes all sales on account, subject to the following collection pattern: 30% are collected in the month of sale; 60% are collected in the first month after sale; and 10% are collected in the second month after sale. if sales for april, may, and june were $60,000, $80,000, and $70,000, respectively, what were the firm's budgeted collections for june?
The firm's budgeted collections for June can be reactant calculated by first determining the amount of each month's sales that would be collected in June, and then adding them up.
April's sales of $60,000, 30% would be collected in April, which is $18,000. 60% would be collected in May, which is $36,000. 10% would be collected in June, which is $6,000 - For May's sales of $80,000, 30% would be collected in May, which is $24,000. 60% would be collected in June, which is $48,000. 10% would be collected in July, which is $8,000. - For June's sales of $70,000, 30% would be collected in June, which is $21,000. 60% would be collected in July, which is $42,000. 10% would be collected in August, which is $7,000.
To calculate the budgeted collections for June, we need to take into account the collection pattern and sales amounts for April, May, and June.
1. Collections from June sales: 30% of June sales ($70,000) = $21,000
2. Collections from May sales (first month after sale): 60% of May sales ($80,000) = $48,000
3. Collections from April sales (second month after sale): 10% of April sales ($60,000) = $6,000.
To know more about reactant visit:
https://brainly.com/question/30129541
#SPJ11
In an acquisition where 100% control is acquired, how would the land accounts of the parent and the land accounts of the subsidiary be reported on consolidated financial statements
The land accounts of the subsidiary be reported on consolidated financial statements will be book value for parent and Fair value for Subsidiary.
Option A is correct.
What exactly is meant by "acquisition"?A business transaction known as an acquisition occurs when one company acquires control of another. These exchanges are a centerpiece of consolidations and acquisitions (M&A), a profession way in corporate regulation or money that spotlights on the purchasing, selling, and combination of organizations.
What is the acquisition behind obtaining?An obtaining is characterized as a corporate exchange where one organization buys a part or another organization's all's portions or resources. Acquisitions are regularly made to assume command over, and expand on, the objective organization's assets and catch collaborations.
Incomplete question :
In an acquisition where 100% control is acquired, how would the land accounts of the parent and the land accounts of the subsidiary be reported on consolidated financial statements on the date of acquisition?
A. Book value for both parent and subsidiary
B. Book value for parent, fair value for subsidiary
C. Fair value for subsidiary, book value for parent
D. Fair value for both parent and subsidiary
Learn more about Acquisition:
brainly.com/question/28487808
#SPJ4
Need help asap i need a scatter plot for how much hours student study to there gpa then estimate the gpa of a student who studies for 15 hours a week. justify your answer. 18 hours, 4.0 gpa 18 hours, 3.8 gpa 16.7 hours, 3.21 gpa 13.8 hours, 1.42 gpa 9.2 hours, 2.23 gpa 0.7 hours, 1.11 gpa 15.5 hours, 3.92 gpa 21.9 hours, 3.69 gpa 0.7 hours, 1.11 18 hours, 3.7 gpa
To create a scatter plot for this data reactant ,we would plot the number of hours a student studies on the x-axis and their GPA on the y-axis.
Using the given data, we can plot each data point on the scatter plot. The x-coordinate of each point represents the number of hours studied per week, and the y-coordinate represents the corresponding GPA. Once the scatter plot is created, we can estimate the GPA of a student who studies for 15 hours a week by looking at the trend of the data. From the given data, we can see that there is a positive correlation between the number of hours studied and the GPA. This means that as the number of hours studied per week increases, the GPA also tends to increase.
Plot the given data points on a scatter plot with hours studied per week on the x-axis and GPA on the y-axis.
2. Determine a trend line or line of best fit for the plotted data. This line represents the relationship between hours studied and GPA.
3. Locate the point on the trend line that corresponds to 15 hours on the x-axis.
4. Read off the corresponding GPA value on the y-axis.
To know more about reactant visit:
https://brainly.com/question/30129541
#SPJ11
glycogen is converted to monosaccharide units by:
A. glycogen phosphorylase. B. glycogenase. C. glucose 6-phosphatase D. glucokinase. E. glycogen synthase.
Glycogen is converted to monosaccharide units by glycogen phosphorylase. The correct answer is A.
What is glycogen?Glycogen is a polysaccharide, which is a large molecule composed of repeating units of glucose. It is treated as a form of energy stored in animals, particularly in liver and muscle cells. When energy is needed, glycogen is broken down through a process called glycogenolysis to release glucose molecules that can be used for fuel. This process is then catalyzed by the enzyme glycogen phosphorylase.
Glycogen phosphorylase is the enzyme responsible for breaking down glycogen into glucose-1-phosphate units through the process of phosphorylation.
The correct answer is A. glycogen phosphorylase. Glycogen phosphorylase is the enzyme responsible for breaking down glycogen into glucose-1-phosphate units through the process of phosphorylation.
To know more about glycogen, refer here:
https://brainly.com/question/31455608
#SPJ4
If you are studying the impact of training on salesperson performance as indicated on an exam taken by salespersons at the end of training, salesperson sales would be the ____________ variable, and the salesperson exam score would be the _____________ variable. A. criterion, predictor B. covariate, independent C. independent, predictor D. dependent, independent E. none of the above
In the context of studying the impact of training on salesperson performance, salesperson sales would be the dependent variable, and the salesperson exam score would be the independent variable.
The correct option is D. dependent, independent
The dependent variable is the variable that is being measured or observed to assess the outcome or effect of an intervention or treatment. In this case, the impact of training on salesperson performance is being studied, and salesperson sales would be the outcome or dependent variable. It is the variable that is expected to change as a result of the training.
On the other hand, the independent variable is the variable that is manipulated or controlled by the researcher. It is the variable that is believed to have an effect on the dependent variable. In this scenario, the salesperson exam score is the independent variable. It is the variable that is used as a measure of salesperson performance before or after the training intervention.
Learn more about variable here:
https://brainly.com/question/30763805
#SPJ11
How many lengths did secretariat win the kentucky derby by
Secretariat won the reactant Kentucky Derby by 31 lengths. This margin of victory is still a record for the Kentucky Derby and is unlikely to be broken anytime soon.
Secretariat's win in the 1973 Kentucky Derby is considered one of the greatest performances in horse racing history. He pulled away from the pack early in the race and continued to increase his lead, winning by an astonishing 31 lengths. This margin of victory is still a record for the Kentucky Derby and is unlikely to be broken anytime soon.
Secretariat, an American Thoroughbred racehorse, competed in the 1973 Kentucky Derby. He won the race by 2.5 lengths, setting a new track record of 1 minute and 59.4 seconds. This remarkable achievement contributed to Secretariat's legacy as one of the greatest racehorses in history.
To know more about reactant visit:
https://brainly.com/question/30129541
#SPJ11
11. Which of the following equations is balanced?
a. Al + Br₂-2 AlBr3
b.
c.
d.
2 Al +2 Br₂ → 3 AlBr,
2 Al + 3 Br₂ → 2 AlBr,
Al + Br₂ →→→ AlBr3
To access the elements of a sequence or associative container, the programmer can use the [] operator or iterators. a. True b. False
True. Both the [] operator and iterators can be used by programmers to access the elements of a sequence or associative container.
In programming, sequences (such as arrays, vectors, or lists) and associative containers (such as maps or sets) are commonly used to store collections of elements. To access the elements within these containers, programmers have multiple options.
The [] operator is a commonly used method to access elements by their index or key. For sequences, the [] operator allows accessing elements by their position in the sequence using an integer index. For associative containers, the [] operator allows accessing elements by their associated key.
On the other hand, iterators are objects used to traverse and access the elements within a container. They provide a way to sequentially access the elements of a container, allowing operations such as reading, modifying, or deleting elements. By using iterators, programmers can iterate over the elements of a container without relying on specific indices or keys.
Therefore, both the [] operator and iterators provide means for programmers to access the elements of a sequence or associative container, offering flexibility in how the elements can be retrieved and manipulated.
Learn more about operator and iterators here:
https://brainly.com/question/30587049
#SPJ11
David has two yellow powders, Powder 1 and Powder 2. He collected data on some properties of these powders. His data are summarized in the table below. Which property CANNOT be used to determine whether the two powders are the same substance? Answer choices - a. mass b. density c. burns in air d. dissolves in water
The property that cannot be used to determine whether the two powders are the same substance is (d) dissolves in water.
The reason is that the ability to dissolve in water is not a unique property that can be used to identify a specific substance. Many different substances can dissolve in water, and the fact that both powders can dissolve in water does not necessarily mean they are the same substance.
On the other hand, properties such as mass, density, and the ability to burn in air can provide more specific information about the nature of the substance. Mass is a fundamental property that can be measured accurately, and if the two powders have the same mass, it suggests they may be the same substance. Density is a derived property that can also be measured and compared, providing information about the compactness of the material. The ability to burn in air indicates a chemical reactivity that can be used to distinguish between different substances.
Therefore, while properties like mass, density, and burning in air can provide valuable information for identifying substances, the property of dissolving in water alone is not sufficient to determine whether the two powders are the same substance.
for more such questions on substance
https://brainly.com/question/29886197
#SPJ8
at the beginning of an experiment, a scientist has 236 grams of radioactive goo. after 210 minutes, her sample has decayed to 14.75 grams. what is the half-life of the goo in minutes? find a formula for , the amount of goo remaining at time . how many grams of goo will remain after 5 minutes?
The half-life of the radioactive goo can be determined by using the formula mentioned above. In order to determine the half-life of the radioactive goo, we can use the following formula:
t = (t₁/2) * log₂(N₀/N)
Where:
- t is the half-life we want to find.
- t₁/2 is the known half-life (in this case, it's the time it takes for the substance to decay to half its initial amount).
- N₀ is the initial amount of the substance.
- N is the amount of the substance remaining after the given time.
From the problem statement, we know that the initial amount N₀ is 236 grams and the amount remaining after 210 minutes, N, is 14.75 grams. We can now plug these values into the formula:
210 = (t₁/2) * log₂(236/14.75)
To solve for t₁/2, we can rearrange the equation:
t₁/2 = 210 / log₂(236/14.75)
The value of t₁/2 can be calculated using a calculator or software. Once we have the half-life, we can use it to find the amount of goo remaining after 5 minutes using the general formula for radioactive decay:
N(t) = N₀ * (1/2)^(t/t₁/2)
For t = 5 minutes, N₀ = 236 grams, and t₁/2 is the calculated value, we can substitute these values into the formula to find the remaining amount of goo after 5 minutes. Given the initial amount and the amount remaining after a certain time, we can solve for the half-life. Once we have the half-life, we can use the general formula for radioactive decay to find the remaining amount of goo after any given time.
for more such questions on radioactive
https://brainly.com/question/18640165
#SPJ8