The complex ion that is optically active is (a) cis-[CoCl2(en)2]*. This is because it has a chiral center, meaning that it is not superimposable on its mirror image. This property arises due to the presence of two different ligands on the same side of the central cobalt atom.
Of the given octahedral complexes, (c) (CrCl2(en)2]* and (d) (CrCl4(en)] are expected to exhibit geometric isomerism. This is because they have two different ligands on opposite sides of the central chromium atom, resulting in cis and trans isomers. The other complexes have ligands that are either all the same or arranged symmetrically, so they do not exhibit geometric isomerism.
The optically active complex ion among the given options is (a) cis-[CoCl2(en)2]^+. Optically active compounds have the ability to rotate plane-polarized light due to their chiral nature. In cis-[CoCl2(en)2]^+, the arrangement of ligands is not symmetrical, making it chiral and optically active.
Regarding octahedral complexes exhibiting geometric isomerism, we can expect this phenomenon in complexes with at least two different types of ligands. In this case, (b) [CrCl2(H2O)(NH3)3] and (c) [CrCl2(en)2]^+ are likely to exhibit geometric isomerism. Both complexes have different ligands, allowing for the formation of cis and trans isomers, which are the basis of geometric isomerism.
To know more about geometric isomerism visit:
https://brainly.com/question/28295773
#SPJ11
Need this answered ASAP
The concentration of the final solution will be 0.2886 M.
Molar concentration50.6 g of NaCl is dissolved in 600 mL of water.
Mole of 50.6 g NaCl = 50.6/58.44 = 0.8658 mol
Molar concentration of the oiriginal solution = 0.8658/06 = 1.4431 M
25 mL of 1.4431 M of the solution is diluted up to the 125 mL mark.
m1 = 1.4431, v1 = 25 ml, v2 = 125 mL
m2 = m1v1/v2 = 1.4431 x 25/125 = 0.2886 M
The concentration of the final solution will be 0.2886 M
More on molar concentration can be found here: https://brainly.com/question/15532279
#SPJ1
a plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. what is its water potential? show your work if it is placed in a solution with a water potential of -1.0 what will happen to this plant cell
A plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. Its water potential is -2 bar. The cell will gain water or swell.
What is Water Potential ?Water Potential is the potential energy of water in a system per unit volume relative to pure water , when both pressure and temperature are kept same. Water potential is never positive. It is expressed in kPa (Kilopascals). The symbol of water potential is ψ.
How to find the Water Potential ?To find the water potential use this formula
[tex]\Psi = \Psi_{s} + \Psi_{p}[/tex]
where,
ψ = Water Potential
[tex]\Psi_{s}[/tex] = Solute Potential
[tex]\Psi_{p}[/tex] = Pressure potential
Now put the value in above expression we get
[tex]\Psi = \Psi_{s} + \Psi_{p}[/tex]
= -2.0 + 0.0
= - 2 bar
Thus from the above conclusion we can say that A plant cell has a solute potential of -2.0 bars and pressure potential of 0.0. Its water potential is -2 bar. The cell will gain water or swell.
Learn more about the Water Potential here: https://brainly.com/question/23855783
#SPJ1
1. Determine the amount concentration of calcium ions and acetate ions in a 0.80 mol/L
solution of calcium acetate (work out formula first).
Since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.
What is concentration?The term concentration has to do with the amount of substance in solution. The concentration can be measured in several units. Generally, concentration is expressed in molarity, molality, mass concentration units or percentage.
Now we are asked to find the amount concentration of calcium ions and acetate ions in a 0.80 mol/L solution of calcium acetate. The formula of calcium acetate is Ca(CH3COO)2.
Thus;
Ca(CH3COO)2(aq) ----> Ca^2+(aq) + 2CH3COO^-(aq)
It then follows that since there is one mole of Ca^2+ in calcium acetate, its concentration is 0.80 mol/L.
Learn more about concentration:https://brainly.com/question/10725862
#SPJ1
According to the 2010 u.s. census, ______ percent of women had college degrees compared to approximately _____ percent of men.
According to the 2010 U.S. Census, 37 percent of women had college degrees compared to approximately 35 percent of men.
In 1970 and early 1980, women have surpassed men in number of bachelor's degree or master's degree in united state.
The women gets more degree to gain financial benefits. The gap in earning is greater in female graduate and non- graduate as compare to male graduate and non-graduate. To give education to girls saves lives and builds stronger families, communication and economic too.
learn about financial and benefits
https://brainly.com/question/19993778
#SPJ4
PLEASE HELP!
You are preparing standard acid and base solutions for the laboratory, using potassium hydrogen phthalate (KHC₈H₄O₄, abbreviated KHP) as the primary standard. KHP (molar mass = 204.22 g/mol) has one acidic hydrogen. You prepared solutions of both NaOH and HCl. It took 22.65 mL of the NaOH solution to titrate (react exactly with) 1.55 g KHP. It then took 25.35 mL of HCl solution to titrate 25.00 mL of the NaOH solution. What is the molarity of the HCl solution?
Which models of the atom from task 1 are not supported by rutherfords experimental evidence?
Model not supported is:
Thomson's atomic model of the atom from task 1 are not supported by Rutherford's experimental evidence.
Experiments given by Thomson, Rutherford & Dalton:
The cathode ray tube experiments of J.J. Thomson demonstrated that all atoms contain minute, electron-like subatomic particles that are negatively charged.The plum pudding model of the atom was put up by Thomson and featured negatively charged electrons embedded within a positively charged "soup."The majority of an atom is empty space, with a small, dense, positively-charged nucleus, as demonstrated by Rutherford's gold foil experiment.Rutherford postulated the nuclear model of the atom in light of these findings.Atoms, in Dalton's opinion, are the tiniest pieces of matter that can never be further divided. This belief persisted up until the time it was learned that the atom was made up of subatomic particles.Dalton and Thomson's concepts are in conflict with the experimental findings of Rutherford. Dalton's model is unsupported by evidence because it does not include electrons, protons, or neutrons.
Learn more about atomic model here,
https://brainly.com/question/27990920
#SPJ4
The emission spectrum of sodium is shown below. What do the two bright
yellow vertical lines in the spectrum show about sodium atoms?
The two lines show that these are the only two lines that do not cause energy transition in the sodium atom. Option D
What are the two lines in the spectrum of sodium atom?The spectrum of the sodium atom appears as a doublet. This implies that there are two lines in the spectrum and they appear as bright yellow lines that are not spaced apart in the spectrum.
The two bright yellow vertical lines in the spectrum shows that these are the only two lines that do not cause energy transition in the sodium atom.
Learn more about spectrum of sodium atom:https://brainly.com/question/27991355
#SPJ1
Other than reducing greenhouse gas emissions, why would an entity switch to an alternative energy solution
Answer:
renewable energy sources such as solar and wind DONT emit carbon dioxide and other greenhouse gases that contribute to global warming
Explanation:
Which diagram is the correct electron dot diagram for magnesium?
A.
A symbol of magnesium M g has four dots representing four free electrons.
B.
A symbol of magnesium M g has three dots representing three free electrons.
C.
A symbol of magnesium M g has one dot representing one free electron.
D.
A symbol of magnesium M g has two dots representing two free electrons.
Answer:
D.) A symbol of magnesium Mg has two dots representing two free electrons.
Explanation:
Magnesium is located in the second group (column) of the periodic table. Elements located here have 2 valence electrons in their outermost shell. Thus, the electron dot diagram of magnesium has 2 dots symbolizing the 2 valence electrons.
If 5. 0 grams of kcl is dissolved in 500 ml of water, what is the concentration of the resulting solution?
If 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.
How to calculate concentration?The concentration of a solution can be calculated by using the following formula;
Molarity = no of moles ÷ volume
According to this question, 5.0 grams of KCl is dissolved in 500 ml of water. The concentration is calculated as follows:
no of moles of KCl = 5g ÷ 74.5g/mol = 0.067mol
Molarity = 0.067mol ÷ 0.5L = 0.134M
Therefore, if 5.0 grams of KCl is dissolved in 500 ml of water, the concentration of the resulting solution will be 0.134M.
Learn more about concentration at: https://brainly.com/question/10725862
#SPJ1
In a voltaic (galvanic) cell, oxidation occurs at the _____ and is where _____ in the salt bridge moves toward.
In a voltaic (galvanic) cell, oxidation occurs at the anode and is where anions in the salt bridge moves toward.
What is Galvanic Cell ?Galvanic Cell or Voltaic Cell is an electrochemical cell that converts the energy of spontaneous redox reactions into electrical energy. In galvanic cell oxidation occurs at the anode and reduction occurs at the cathode. The anode is positive and cathode is negative, anode attracts anions from solution in an electrolytic cell.
Thus from the above conclusion we can say that In a voltaic (galvanic) cell, oxidation occurs at the anode and is where anions in the salt bridge moves toward.
Learn more about the Galvanic Cell here: https://brainly.com/question/15096829
#SPJ1
Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteins concentration mechanisms do not include:___.
Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form protein concentration mechanisms that do not include Boiling.
Amino acids are natural compounds composed particularly of nitrogen, carbon, hydrogen, and oxygen. Your body desires 20 awesome amino acids to grow and function. amino acid, any of a group of organic molecules that consist of a basic amino group (―NH2), an acidic carboxyl group (―COOH).
fruits have an excessive content of amino acid that allows modify insulin degrees. fruits like bananas, apples, berries, and so forth., are rich resources of amino acids.
learn more about amino acid here
https://brainly.com/question/2526971
#SPJ1
A saturated solution of baso4 has a concentration of 0.5mol/l. a 55ml sample is taken by you. what is the mass of baso4 in the solution
Answer:
6.4 g BaSO₄
Explanation:
You have been given the molarity and the volume of the solution. To find the mass of the solution, you need to (1) find the moles BaSO₄ (via the molarity ratio) and then (2) convert moles BaSO₄ to grams BaSO₄ (via the molar mass). It is important to arrange the conversions in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 2 sig figs to reflect the sig figs of the given values.
Molarity (mol/L) = moles / volume (L)
(Step 1)
55 mL / 1,000 = 0.055 L
Molarity = moles / volume <----- Molarity ratio
0.5 (mol/L) = moles / 0.055 L <----- Insert values
0.0275 = moles <----- Multiply both sides by 0.055
(Step 2)
Molar Mass (BaSO₄): 137.33 g/mol + 32.065 g/mol + 4(15.998 g/mol)
Molar Mass (BaSO₄): 233.387 g/mol
0.0275 moles BaSO₄ 233.387 g
--------------------------------- x ------------------- = 6.4 g BaSO₄
1 mole
Calculate the pH of a buffer solution prepared by mixing 75.0 mL of 1.00 M lactic acid and 25.0 mL of 0.50 M sodium lactate.
From the calculations, the pH of the buffer is 3.1.
What is the pH of the buffer solution?The Henderson-Hasselbach equation comes in handy when we deal with the pH of a buffer solution. From that equation;
pH = pKa + log[(salt/acid]
Amount of the salt = 25/1000 * 0.50 M = 0.0125 moles
Amount of the acid = 75/1000 * 1.00 M = 0.075 moles
Total volume = ( 25 + 75)/1000 = 0.1 L
Molarity of salt = 0.0125 moles/0.1 L = 0.125 M
Molarity of the acid = 0.075 moles/0.1 L = 0.75 M
Given that the pKa of lactic acid is 3.86
pH = 3.86 + log( 0.125/0.75)
pH = 3.1
Learn more about pH:https://brainly.com/question/5102027
#SPJ1
Which of the following results in an increase in the entropy? (4 points)
Freezing water
Cooling a solid
Condensing water vapor
Dissolving sugar in water
Dissolving sugar in water results in an increase in the entropy.
Hence, Option (D) is correct answer.
What is Entropy ?Measurement of randomness of a system is called entropy. It is an extensive property. It is a state function. Unit of entropy is JK⁻¹ mol⁻¹.
Now lets check all options one by one
Option (A): Freezing water
Freezing water decreases the entropy because here second law of thermodynamics does not violate.
So it is incorrect option
Option (B): Cooling water
Cooling water does not increases entropy because entropy increases when solid melts to give liquid.
So it is incorrect option
Option (C): Condensing water vapour
In Condensing water vapour the temperature of liquid phase decreases and thus kinetic energy decreases. The randomness will decrease and hence entropy will also decrease.
So it is incorrect option.
Option (D): Dissolving sugar in solute
In dissolving sugar in solute the solid dissociates to ions and the randomness will increase and hence entropy will also increase.
So it is correct option
Thus from the above conclusion we can say that Dissolving sugar in water results in an increase in the entropy.
Hence, Option (D) is correct answer.
Learn more about the Entropy here: https://brainly.com/question/1477087
#SPJ1
Write a balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.
V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
The word based equation is
Vanadium(V) oxide + Hydrogen gas → Vanadium (III) oxide + Water
Now write the chemical equation
V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l)
Reactant side Product side
V = 2 V = 2
O = 5 O = 5
H = 4 H = 4
We can see that the number of atoms on reactant side is equal to the number of atoms on product side. So the given equation is balanced.
Thus from the above conclusion we can say that V₂O₅ (s) + 2H₂ (g) → V₂O₃ (s) + 2H₂O(l) is the balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water.
Learn more about the Balanced chemical equation here: https://brainly.com/question/15355912
#SPJ4
what causes a wavy pattern of dark and light bands on the bottom of a pond? A P E X learning
A wavy pattern of dark and light bands on the bottom of a pond is caused by refraction of light waves through a rough surface; option D.
What is destructive interference?Destructive interference occur when two waves come in contact with each other and cancel each other out.
Reflection and refraction of light waves can result in destructive interference. An example of destructive interference due to refraction of light is a wavy pattern of dark and light bands on the bottom of a pond.
In conclusion, destructive interference occurs when waves cancel each other out.
Learn more about refraction of light waves at: https://brainly.com/question/15418350
#SPJ1
The answer to the question is D.
Vapor pressure of a liquid increases with increasing temperature because increasing the temperature _______________.
Vapor pressure of a liquid increases with increasing temperature because increasing the temperature results in increasing kinetic energy and increase in molecular transition and motion.
What is Vapor Pressure?
The pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases (solid or liquid) at a specific temperature in a closed system is referred to as vapor pressure.A liquid's evaporation rate can be determined by looking at the equilibrium vapor pressure. It has to do with how often particles tend to float away from liquids (or a solid).Volatile is a term used to describe a chemical that has a high vapor pressure at room temperature. Vapor pressure is the force that vapor exerts when it is present above a liquid surface.A liquid's molecules have an increasing kinetic energy as its temperature rises. The more molecules that convert into a vapor as a result of an increase in molecular kinetic energy, the higher the vapor pressure will be.Know more about vapor pressure https://brainly.com/question/14617982
#SPJ4
One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. What will prevent you from coming into contact with this hazard
One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.
What is Aluminum Chloride ?Aluminum chloride is also called Aluminum trichloride. The formula of Aluminum chloride is AlCl₃. Aluminum chloride is a poor conductor of electricity in molten state. It is a powerful Lewis acid. It has very low melting point and boiling point.
What will prevent you from coming into contact with this hazard ?To prevent from this hazard follows these rules:
Wear safety glassesWear Impervious gloves Avoid contact with water or moisture. Avoid dust formationThus from the above conclusion we can say that One of the product chemicals is aluminum chloride, which is an eye and skin irritant that can cause chemical burns. Wear safety glasses, Avoid contact with water or moisture and Avoid dust formation will prevent you from coming into contact with this hazard.
Learn more about the Aluminum Chloride here: https://brainly.com/question/6061451
#SPJ4
How many molecules of H₂O are
equivalent to 97.2 g H₂O?
(H = 1.008 g/mol, O = 16.00 g/mol)
[?]
[?]x10 molecules
Enter your answer with the correct number of
significant figures and be sure the prefix is a number
between 1 and 10!
dro's Number = 6.02 x 1023 molecules/mole
Answer:
3.25 x 10²⁴ molecules H₂O
Explanation:
To find the number of H₂O molecules, you need to (1) convert grams to moles (via molar mass) and then (2) convert moles to molecules (via Avogadro's Number). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the amount of sig figs in the given value.
Atomic Mass (H): 1.008 g/mol
Atomic Mass (O): 16.00 g/mol
Molar Mass (H₂O): 2(1.008 g/mol) + 16.00 g/mol
Molar Mass (H₂O): 18.016 g/mol
Avogadro's Number:
6.02 x 10²³ molecules = 1 mole
97.2 g H₂O 1 mole 6.02 x 10²³ molecules
------------------ x ------------------- x ------------------------------------ =
18.016 g 1 mole
= 3.25 x 10²⁴ molecules H₂O
Which molecule will undergo only london dispersion forces when interacting with other molecules of the same kind?.
Molecules undergo London dispersion forces:
[tex]C_{4}H_{10}[/tex] is the molecule will undergo only London dispersion forces when interacting with other molecules of the same kind.
What are London dispersion forces?
A sort of force that interacts between atoms and molecules that is often electrically symmetric is referred to as a London dispersion force.When viewed from the nucleus, their electron distribution is frequently symmetrical. This dispersion force, which is also known as a transient attractive force, is frequently observed when the locations of the electrons in two nearby atoms cause the atoms to temporarily form dipoles.The bond is polar when there are significant variations between the elements' electronegativities; it is nonpolar when there are similarities. When the molecule's dipole moment is equal to O, it is nonpolar; when it differs from O, it is polar.The force at these molecules is known as the London dispersion force. In nonpolar molecules, the forces are weak, and partial charges must be induced so that they can bond. In polar molecules, partial charges caused by polarity result in a stronger link known as a dipole-dipole. The dipole-dipole is significantly stronger and known as a hydrogen bond if it is connected to a large electronegative atom (F, O, or N). Ionic force is the name for the attraction force at ionic substances.The intermolecular force in the letter an is the London dispersion force because the compound is nonpolar;Reason for incorrect options:
b: the compound is ionic because Na is a metal and the other part is covalent,
c: two compounds are possible: one is nonpolar and exhibits London dispersion force; the other is polar and exhibits dipole-dipole force; and
d: both compounds exhibit hydrogen bonds (H bonded to O, and H bonded to F).
NOTE: Your question is incomplete, but most probably your full question was, which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind? Which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind?
A. [tex]C_{4}H_{10}[/tex]
B. [tex]NaC_{2}H_{3}O_{2}[/tex]
C. [tex]CH_{2}C_{12}[/tex]
D. [tex]C_{2}H_{5}OH HF[/tex]
Learn more about the London dispersion forces here,
https://brainly.com/question/22388709
#SPJ4
how many moles are in 2.00g of H2O
n = m/M = 2/18 = 1/9 ~0,1 mol
Answer:
.111 mole (using 3 significant digits)
Explanation:
Mole weight of H2O = 2 x 1.008 + 15.999 = 18.015 gm/mole
2 gm / 18.015 gm/mole = .111 mole
What type of molecule is shown below?
S
H-C=C-CH2-CH3
O A. An alkene-alkyne
OB. An alkane-alkyne
OC. An alkyne
O D. An alkane
H - C ≡ C - CH₂ - CH₃ this is an alkyne molecule.
Hence, Option C is correct answer.
What is Alkane ?The saturated hydrocarbon which have only single bonds between the carbon atoms is called Alkanes.
What is Alkene ?The unsaturated hydrocarbon which have at least one carbon carbon double bond is called Alkene.
What is Alkynes ?The unsaturated hydrocarbon which have one or more than one carbon carbon triple bonds is called Alkynes.
H - C ≡ C - CH₂ - CH₃ in this molecule one triple bond is present so it is alkyne.
Thus from the above conclusion we can say that H - C ≡ C - CH₂ - CH₃ this is an alkyne molecule.
Hence, Option C is correct answer.
Learn more about the Alkane, Alkene and Alkyne here: https://brainly.com/question/24270289
#SPJ1
These two images have different chemical change words and definitions,
Can someone please help me match the word from its meaning?
Thank you!
Answer:
(1) Acid -------------------------------------> (G) When dissolved in water, its solution has a pH value less than 7. Acids are proton (H⁺ ion) donors.
(2) Alkali -----------------------------------> (E) The oxide, hydroxide, or carbonate of a metal that will react with an acid, forming a salt as one of the products (if a base dissolves in water it is called an alkali. Bases are proton (H⁺ ion) acceptors.
(3) Base ------------------------------------> (I) Its solution has a pH value of more than 7.
(4) Blast furnace ------------------------> (C) The huge reaction vessels used in industry to extract iron from its ore.
(5) Displacement reaction ----------> (R) A reaction in which a more reactive element takes the place of a less reactive element in one of its compounds or in solution.
(6) Mole -----------------------------------> (A) A very large number that is the amount of substance in the relative atomic or formula mass of a substance.
(7) Neutral -------------------------------> (J) A solution with a pH value of 7 which is neither acidic nor alkaline. Alternatively, something that carries no overall charge.
(8) Neutralization ----------------------> (F) The chemical reaction of an acid with a base in which a salt and water are formed. If the base is a carbonate of hydrogen carbonate, carbon dioxide is also produced in the reaction.
(9) Ore -------------------------------------> (P) Ore is rock which contains enough metal to make it economically worthwhile to extract the metal.
(10) Oxidation --------------------------> (B) A reaction where oxygen is added to a substance / or when electrons are lost from a substance.
(11) pH -------------------------------------> (O) A number which shows how strongly acidic or alkaline a solution is.
(12) Pipette ------------------------------> (N) A glass tube used to measure accurate volumes of liquids.
(13) Precipitate -------------------------> (K) An insoluble solid formed by a reaction taking place in solution.
(14) Reactant ---------------------------> (M) A substance we start with before a chemical reaction takes place.
(15) Reduction -------------------------> (S) A reaction in which oxygen is removed or electrons are gained.
(16) Salt ----------------------------------> (Q) A salt is a compound formed when some or all of the hydrogen in an acid is replaced by a metal.
(17) Strong acids ---------------------> (L) These acids completely ionize in solution and have a high concentration of H⁺ (aq) ions in solution.
(18) Universal indicator ------------> (H) A mixture of indicators that can change through a range of colors to show how strongly acidic or alkaline liquids and solutions are.
(19) Weak acids ----------------------> (D) Acids that do not ionize completely in aqueous solutions.
Calculate the molar mass of powdered fruit drink mix, made from sucrose (c12h22o11). appreciate it.
molar mass of sucrose is 342 g/mol.
Concept:
It is the substance's molecular mass. M is the abbreviation for it, and g/mol is the standard unit for measuring molar mass.
Given:
Sucrose (C12H22O11)
Find:
Calculate the molar mass of the powdered fruit drink mix, made from sucrose (C12H22O11).
Solution:
The molar mass of carbon = 12 g/mol
The molar mass of hydrogen = 1 g/mol
The molar mass of oxygen = 16 g/mol
Thus, the molar mass of sucrose can be calculated as:
C12H22O11 12 C + 22 H + 11 O
= 12 12 g/mol + 22 * 1 g/mol + 11 * 16 g/mol
= 144 g/mol + 22 g/mol + 176 g/mol = 342 g/mol
Therefore, the molar mass of sucrose is 342 g/mol.
Hence, the molar mass of the powdered fruit drink mix, made from sucrose
Hence, the molar mass of the powdered fruit drink mix, made from sucrose(C12H22O11) is 342 g/mol.
Learn more about Molar mass here:
https://brainly.com/question/24236159
#SPJ4
The density of ethanol, C2H5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 15.0 g of CO2 via a combustion reaction
The answer is 9.94 ml.
What is density?Density is a word we use to describe how much space an object or substance takes up (its volume) in relation to the amount of matter in that object or substance (its mass). Another way to put it is that density is the amount of mass per unit of volume. If an object is heavy and compact, it has a high density.Given,
The density of ethanol, C2H5OH = 0.789 g/mL
[tex]n (CO_{2} ) = \frac{m}{M} = \frac{15G}{44 g/mol} } = 0.341 mol;[/tex]
[tex]n ( C_{2} H_{2} OH) = \frac{n (CO_{2}) }{2} = \frac{0.341}{2} = 0.1705 mol;[/tex]
[tex]m (C_{2} H_{2} OH) = 0.1705 mol * 46 g/ mol[/tex] = 7.843 g
[tex]V (C_{2} H_{2} OH ) = \frac{7.843}{0.789} = 9.94 ml.[/tex]
Therefore, the answer is 9.94 ml
Learn more about density of ethanol,
brainly.com/question/18597444
#SPJ4
The complete question is -
If the density of ethanol, C2H5OH, is 0.789 g/mL. How many milliliters of ethanol are needed to produce 15.0 g of CO2 according to the following chemical equation?
C2H5OH(l) + 3 O2(g) → 2 CO2(g) + 3 H2O(l)
A sample of 0.400 moles of nitrogen occupies 0.800 L. Under the same conditions, what number of moles occupies 1.200 L
Taking into account the Avogadro's Law, 0.600 moles occupies 1.200 L.
Avogadro's LawAvogadro's Law is a gas law that relates the volume and amount of gas at constant pressure and temperature.
Avogadro's law states that volume is directly proportional to the amount of gas: increasing the amount of gas will increase the volume, while decreasing the amount of gas will decrease the volume.
Mathematically, this law states that the ratio between the volume and the amount of gas is constant:
[tex]\frac{V}{n} =k[/tex]
Assuming that there is a certain amount of gas n1 that occupies a volume V1 at the beginning of the experiment, by varying the amount of gas to a new value n2, then the volume will change to V2, and the following is true:
[tex]\frac{V1}{n1} =\frac{V2}{n2}[/tex]
Amount of moles in this caseIn this case, you know:
V1=0.800 Ln1= 0.400 molesV2= 1.200 Ln2= ?Replacing in Avogadro's Law:
[tex]\frac{0.800 L}{0.400 moles} =\frac{1.200 L}{n2}[/tex]
Solving:
[tex]n2x\frac{0.800 L}{0.400 moles} =1.200 L[/tex]
[tex]n2=\frac{1.200 L}{\frac{0.800 L}{0.400 moles} }[/tex]
n2= 0.600 moles
Finally, 0.600 moles occupies 1.200 L.
Learn more about Avogadro's Law:
brainly.com/question/4147359
#SPJ1
Which equation agrees with the ideal gas law?
StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
V subscript 1 n subscript 1 equals V subscript 2 n subscript 2.
P subscript 1 n subscript 1 equals P subscript 2 n subscript 2.
StartFraction P subscript 1 over P subscript 2 EndFraction equals StartFraction T subscript 2 over T subscript 1.
The equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction (option A).
What is ideal gas law?Ideal gas law in physics is the equation of state of an ideal gas, which is a gas whose molecules do not interact or collide.
The equation of the ideal gas law is as follows:
PV = nRT
This equation shows that the volume is directly proportional to the volume of the gas.
Therefore, the equation that agrees with the ideal gas law is as follows: StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
Learn more about ideal gas law at: https://brainly.com/question/13821925
#SPJ1
option A, v1/t1 = v2/t2
What is the molality of a solution prepared by dissolving 2.00 ml of bromine (d = 3.105 g/ml) in 125 ml of acetic acid, hc2h3o2 (d = 1.05 g/ml) (ans. 0.30 m)?
The molality of a solution is 0.304g
Calculation,
Given data,
Volume of bromine = 2 mldensity of bromine = 3.105 g/ml Volume of acetic acid = 125 mldensity of of acetic acid = 1.05 g/mlDensity of bromine = 3.105 g/ml = mass / volume = mass / 2 ml
Mass of bromine = 3.105 g/ml × 2 ml = 6.206 g
Density of acetic acid = 1.05 g/ml = mass / volume = mass / 125 ml
Mass of bromine = 1.05 g/ml × 125 ml = 127.5 g
Molality = mass of solute in gram/molar mass of solute × 1000/mass of solvent in gram
Molality = 6.206 g/159.88 g/mol × 1000/127.5 g = 0.304 g
learn about Molality
https://brainly.com/question/20366625
#SPJ4
The molecule CH₂O contains two single bonds and one double bond. True or false
Answer:
The answer to your question is True
Explanation:
CH2O is a polar molecule. It has three polar bonds that are arranged asymmetrically, thus allowing their dipole moments to add up and give the molecule an overall dipole moment. CH2O has a central carbon atom that forms two single bonds with the two hydrogen atoms and a double bond with the oxygen atom.
I hope this helps and have a good day!