Phenolphthalein has often been used to monitor the progress of acid-base neutralization reactions.
What color will phenolphthalein be if there is an excess of base present?
A) colorless
B) green
C) pink
D) yellow

Answer:

Globe valve

[tex]hope \: it \: helps[/tex]

The hazard class for an item with the proper shipping name of Corrosive solids, n.o.s. is Class 8 - Corrosive.

This means that the item poses a hazard to people and the environment due to its corrosive properties and requires special handling and shipping precautions to ensure safety.

Based on the 49 CFR HAZMAT Table, the hazard class for an item with the proper shipping name "Corrosive solids, n.o.s." (not otherwise specified) is Hazard Class 8. This class indicates that the substance is corrosive and poses a hazard during shipping due to its potential to cause damage to living tissues or other materials it comes into contact with.

To know more about Hazard click here .

brainly.com/question/29602984

#SPJ11

In a linked-based implementation of the ADT list with a tail reference, the performance of adding an entry that is not at the beginning of the list is O(1), as long as we have a reference to the tail of the list. This is because we can simply add the new entry to the end of the list by updating the tail reference, without needing to traverse the entire list. Therefore, the correct answer is d. O(1).

to know more about ADT list click this link -

brainly.com/question/13440204

#SPJ11

When PVC pipe is stacked loose, it should not be stacked more than 5.0 feet high. The correct answer is option c.

Stacking PVC pipe loosely means that the pipes are not secured or fastened together, and they are simply placed one on top of the other. It is important to stack PVC pipe correctly to prevent damage to the pipes and ensure safety in the workplace.

If PVC pipes are stacked too high, they can become unstable and fall over, which can result in injury to workers or damage to the pipes. Additionally, the weight of the pipes can cause the bottom pipes to become compressed or deformed, leading to leaks or cracks.

To prevent these issues, it is recommended to stack PVC pipes in a stable and organized manner. This can be achieved by using racks or pallets, securing the pipes together with straps or bands, and labeling the stacks for easy identification. By following these guidelines, you can ensure that your PVC pipes are stored safely and securely.

Therefore, option c is correct.

For more such questions on PVC pipe, click on:

https://brainly.com/question/1796072

#SPJ11

The amount by which a solution's vapor pressure, freezing point, and boiling point differ from those of the pure solvent depends on the concentration of solute particles in the solution. This is known as colligative properties.

Colligative properties are physical properties of solutions that depend only on the number of solute particles in the solution, regardless of the chemical identity of the solute particles. The colligative properties include vapor pressure lowering, freezing point depression, boiling point elevation, and osmotic pressure.

For example, in the case of vapor pressure lowering, the presence of solute particles in a solution decreases the number of solvent molecules at the surface of the solution, thereby reducing the vapor pressure of the solution compared to that of the pure solvent.

The amount of vapor pressure lowering is proportional to the concentration of solute particles in the solution, but is independent of the identity of the solute particles.

Similarly, the amount of freezing point depression and boiling point elevation is proportional to the concentration of solute particles in the solution. The colligative properties are important in various fields, such as in the determination of molar mass of unknown solutes or in the process of freeze-drying of food and pharmaceuticals.

For more question on vapor pressure click on

https://brainly.com/question/30459262

#SPJ11

Using limiting reactant, 22.8 grams of silver chloride are produced.

The limiting reactant is the reactant that is completely consumed in a chemical reaction and limits the amount of product that can be formed. It is the reactant that is present in the smallest stoichiometric amount compared to the other reactants involved in the reaction

To determine the limiting reactant, we need to calculate the amount of product that can be produced by each reactant and compare the results.

First, we need to convert the given masses of silver nitrate and iron (III) chloride into moles:

27.0 g AgNO₃ * (1 mol AgNO₃/169.87 g AgNO₃) = 0.159 mol AgNO₃

43.5 g FeCl₃ * (1 mol FeCl₃/162.2 g FeCl₃) = 0.268 mol FeCl₃

Next, we need to use the balanced chemical equation to determine the amount of product that can be produced by each reactant:

From the balanced chemical equation, we know that 3 moles of AgCl are produced for every 1 mole of FeCl₃ reacted.

Amount of AgCl produced by AgNO₃:

0.159 mol AgNO₃ * (3 mol AgCl/3 mol AgNO₃) = 0.159 mol AgCl

Amount of AgCl produced by FeCl₃:

0.268 mol FeCl₃ * (3 mol AgCl/1 mol FeCl₃) = 0.804 mol AgCl

Since AgNO₃ produces less AgCl (0.159 mol) than FeCl₃ (0.804 mol), AgNO₃ is the limiting reactant.

Finally, we can calculate the mass of AgCl produced using the amount of AgNO₃ reacted:

0.159 mol AgNO₃* (3 mol AgCl/3 mol AgNO₃) * (143.32 g AgCl/1 mol AgCl) = 22.8 g AgCl

To know more about limiting reactant, click here

https://brainly.com/question/14225536

#SPJ1

Methyl orange is the least desirable residual test for chlorine. Hence, option b is correct.

Methyl orange is a titration indicator dye that changes color when an acid or base is present. Due to the existence of additional oxidizing agents or pollutants that could react with the indicator, the test is not specific for detecting chlorine residue and may produce erroneous findings.

SNORT, OTA, and DPD are more accurate and trustworthy ways to measure chlorine residual in water than the other residual assays. OTA is a colorimetric method that measures total chlorine residual, SNORT is a visual indicator that changes color in the presence of chlorine, and DPD is a frequently used test that evaluates free and mixed chlorine residual.

To know more about residual test, visit,

https://brainly.com/question/16936855

#SPJ4

a. True. Sodium fluoroacetate, also known as "1080," is indeed the most effective fast-acting rodenticide Rodenticide Act available for use throughout the United States.

The Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) of 1947 is the law that governs the use of pesticides and herbicides in the USA. Certain substances are not allowed to be used as pesticides under this law.

A proper federal regulatory framework for the use, distribution, and sale of pesticides is provided by the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) statute.

The purpose of this law (FIFRA) is to safeguard those who use pesticides, consumers, and the environment.

The US Environmental Protection Agency (EPA) is required to grant licences for the use of pesticides throughout the country.

To assure the safety and efficacy of all pesticides used in the US, the EPA reviews and registers them in accordance with FIFRA. The organisation also controls the use, handling, and disposal of pesticides and performs routine inspections to make sure they remain safe.

If someone or a business violates FIFRA rules, the EPA has the authority to file a lawsuit and, if necessary, revoke or suspend pesticide registrations.

Learn more about Rodenticide Act here

https://brainly.com/question/25780629

#SPJ11

The statement "reduction occurs when electrons are lost" is incorrect. Reduction actually occurs when electrons are gained in an electrochemical cell. The other statements are correct.

The Electrolytic cells require the addition of electricity to drive a non-spontaneous reaction, the longer that current is passed through an electroplating cell, the more metal will plate on the object, and in a galvanic cell, oxidation occurs at the anode while reduction occurs at the cathode. to help you with your question. All of the following statements regarding electrochemical cells are correct except: "reduction occurs when electrons are lost." This statement is incorrect because reduction actually occurs when electrons are gained, not lost. In an electrochemical cell, the transfer of electrons takes place through a redox reaction, with one species being reduced while the other is oxidized. In a galvanic cell, oxidation occurs at the anode, while reduction occurs at the cathode. Electrolytic cells, on the other hand, require an external electrical energy source to drive the redox reaction. The longer the current is passed through an electroplating cell, the more metal will plate on the object, as the process is directly related to the duration of the applied current.

learn more about electrochemical here.

https://brainly.com/question/29538826

#SPJ11

A phenomenon known as the urban heat island effect, due to this on average, urban areas can be up to 1-3°C (1.8-5.4°F) warmer than surrounding rural areas at night. This is primarily due to the high concentration of buildings, pavement, and other heat-absorbing surfaces in urban areas, which trap and re-radiate heat back into the atmosphere.

Additionally, urban areas often have less vegetation and green spaces, which would otherwise provide shade and evaporative cooling.

The urban heat island effect is a phenomenon where urban areas are significantly warmer than surrounding rural areas, especially at night. The effect is most pronounced during the summer months, when temperatures can be up to 6-8°C (10.8-14.4°F) warmer in urban areas compared to rural areas.

This temperature difference can have significant impacts on human health, energy consumption, and the environment.

The urban heat island effect is primarily caused by the high concentration of buildings, pavement, and other heat-absorbing surfaces in urban areas.

These surfaces absorb solar radiation during the day and then re-radiate the heat back into the atmosphere at night, which can keep urban areas warmer than rural areas even after the sun goes down.

In addition, urban areas often have less vegetation and green spaces than rural areas, which would otherwise provide shade and evaporative cooling.

For more question on urban heat island effect click on

https://brainly.com/question/23712495

#SPJ11

The concentration of all gases can be assumed to be 1 M, so Kc will be equal to 1. Therefore, the Kc for this reaction at 25°C is 1.

Concentration is the act of focusing on one specific task or activity while shutting out other distractions. It involves using mental effort and energy to attain a desired outcome or goal. Concentration can be used to enhance learning, memory, and creativity, as well as to improve performance in sports, work, or any other area of life. It involves being mindful of the present moment and focusing on the task at hand.

The Kp for this reaction is 3 x 1024. To calculate the Kc, we first need to determine the reaction quotient, Qc. Since the reaction is 2SO₂(g) + O2(g) → 2SO₃(g), we can calculate Qc as follows:
Qc = [SO3]² / [SO2]² [O2]
At equilibrium, the reaction quotient (Qc) will be equal to the equilibrium constant (Kc). Therefore, we can set these two values equal to one another and solve for Kc.
Kc = [SO3]² / [SO2]² [O2]
At 25°C, the concentration of all gases can be assumed to be 1 M, so Kc will be equal to 1. Therefore, the Kc for this reaction at 25°C is 1.

To learn more about concentration
https://brainly.com/question/26255204
#SPJ1

Answer is down below!

Explanation:

Answer and Explanation: The following is not true about water molecules: c) Water molecules form ionic bonds. Rather, water molecules form hydrogen bonds with each other due to their polarity. Water is a polar molecule, which means it has a charge difference on either end.

Shown below is a list of pairs of compounds. In which pair is the second compound produced by an oxidation of the first compound:

A. Pyruvate and phosphoenolpyruvate

B. Succinate and fumarate

C. Oxaloacetate and malate

D. Phosphoenolpyruvate and 2-phosphoglycerate

E. 1,3-bisphosphoglycerate and glyceraldehyde-3-phosphate

The pair of compounds in which the second compound is produced by an oxidation of the first compound is: B. Succinate and fumarate.
In the reaction from succinate to fumarate, an enzyme called succinate dehydrogenase oxidizes succinate, which results in the production of fumarate. This oxidation process involves the removal of two hydrogen atoms from succinate and the addition of a double bond between the two central carbon atoms, forming fumarate.

To know more about succinate dehydrogenase oxidizes succinate:

https://brainly.com/question/13943912

#SPJ11

When 3.50 g of Mg(OH)2 is dissolved in 1.5 L of a 0.200 M KOH solution, the concentration of Mg2+ ions can be determined using the solubility product (Ksp) of Mg(OH)2, which is 1.2 x 10^-11.

First, calculate the concentration of OH- ions in the KOH solution:
OH- concentration = 0.200 mol/L

Next, write the solubility product expression for Mg(OH)2:
Ksp = [Mg2+][OH-]^2

Plug in the known values and solve for the Mg2+ concentration:
1.2 x 10^-11 = [Mg2+](0.200)^2,

Now, we can use the Ksp equation to solve for the concentration of Mg2+ ions:

Ksp = [Mg2+][OH-]^2
1.2 x 10^-11 = [Mg2+][0.200]^2
[Mg2+] = 1.2 x 10^-11 / 0.04
[Mg2+] = 3.0 x 10^-10 M
Therefore, the concentration of Mg2+ ions in the solution is 3.0 x 10^-10 M.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

To find the concentration of Mg2+ ions, we first need to write the chemical equation for the dissolution of Mg(OH)2:
Mg(OH)2 (s) ⇌ Mg2+ (aq) + 2OH- (aq)

The solubility product expression for Mg(OH)2 is:
Ksp = [Mg2+][OH-]^2 = 1.2 x 10^-11

We know that 3.50 g of Mg(OH)2 are dissolved in 1.5 L of a 0.200 M solution of KOH.

To determine the concentration of Mg2+ ions, we need to use the stoichiometry of the balanced equation.

First, we need to calculate the number of moles of KOH present in 1.5 L of a 0.200 M solution:
n(KOH) = Molarity x Volume = 0.200 mol/L x 1.5 L = 0.300 mol

Since KOH is a strong base, it will dissociate completely in water to form OH- ions. Therefore, the concentration of OH- ions in the solution will be:
[OH-] = n(OH-) / V = 0.300 mol / 1.5 L = 0.200 M

Now we can use the solubility product expression to find the concentration of Mg2+ ions:

Ksp = [Mg2+][OH-]^2
[Mg2+] = Ksp / [OH-]^2 = (1.2 x 10^-11) / (0.200 M)^2 = 3.0 x 10^-10 M

Therefore, the concentration of Mg2+ ions in the solution is 3.0 x 10^-10 M.

To know more about stoichiometry of the balanced equation:

https://brainly.com/question/30808199

#SPJ11

The ban of chlorofluorocarbons was targeted at companies that use, export, or import the gas, not those that produce it. This ban was put in place to protect the ozone layer from further depletion caused by the use of chlorofluorocarbons. The correct answer is b. produce the gas.

CFCs are chemicals that can damage the ozone layer and are used in items like aerosols and refrigerators. "CFC" is an acronym for "chlorofluorocarbon."

The use of CFC is restricted in many nations because it breaks down into chlorine atoms, which weakens or destroys the ozone layer.

The ozone layer's thinning permits harmful UV radiation to penetrate the atmosphere, which can result in skin cancer, genetic diseases, sunburn, and other adverse effects on marine and forest life. Hence, The correct answer is b. produce the gas.

To know more about chlorofluorocarbons click here:

https://brainly.com/question/16159504

#SPJ11

E) Kr, or Krypton, is the element expected to have chemical and physical properties closest to those of Argon.

Both Argon and Krypton belong to the same group (Group 18) in the periodic table, which consists of noble gases. Elements in the same group tend to have similar properties due to having the same number of valence electrons. Since Argon and Krypton are both noble gases, they share similar properties such as being colorless, odorless, and having low reactivity. They are both colorless and odorless gases at room temperature and pressure, and they are both quite unreactive, which is why they are classified as noble gases. Both argon and krypton have relatively high boiling points and melting points, and both are very stable elements.

To learn more about krypton click here https://brainly.com/question/2364337

#SPJ11

It is true that the Maximum Contaminant Level (MCL) is the highest concentration of a contaminant that is allowable in a water system. So, option(a) is right one.

The EPA has drinking water regulations for more than 90 pollutants. MCL is the maximum contaminant level allowed in drinking water. Once the MCLG is defined, the EPA sets the applicable standards. MCL is the maximum allowable pollutant level in water supplied to all public water users.

Maximum Contaminant Level (MCL), which sets a limit value for the concentration of pollutants in drinking water. The MCL for arsenic in drinking water is 10 parts per billion (ppb). So it is clear from the above discussion that the statement is true.

For more information about concentration , visit :

https://brainly.com/question/28564792

#SPJ4

The molecular state of hypochlorous acid is the desired product from chlorination of pool waters. The product:
d. is 62 percent molecular at pH of 7.2

Hypochlorous acid is a weak acid that dissociates into hypochlorite ions at higher pH levels. Therefore, in order to maintain the desired molecular state of hypochlorous acid, it is important to monitor and adjust the pH levels in pool waters. Chlorination refers to the process of adding chlorine compounds to pool water to disinfect it and eliminate harmful bacteria and viruses. Hypochlorous acid is one of the most effective disinfectants produced during this process. It is a weak acid, which means it partially ionizes in water and has a pH-dependent equilibrium between its molecular and ionic forms. At a neutral pH of 7.2, HOCl is 62% molecular, and 38% ionized (as the chloride anion, Cl−).

To learn more about Hypochlorous acid click here https://brainly.com/question/16984896

#SPJ11

A sugar molecule can form a cyclic-hemiacetal through a reaction between its alcohol and aldehyde functional groups.

A sugar forms a cyclic-hemiacetal by reaction between an alcohol and an aldehyde.

Step 1: Identify the alcohol and aldehyde functional groups within the sugar molecule.
Step 2: The reaction occurs when the hydroxyl group (alcohol) reacts with the carbonyl group (aldehyde).
Step 3: The oxygen atom in the hydroxyl group forms a bond with the carbon atom in the aldehyde.
Step 4: A water molecule is eliminated in the process, and a cyclic-hemiacetal structure is formed.

In summary, a sugar molecule can form a cyclic-hemiacetal through a reaction between its alcohol and aldehyde functional groups.

To know more about sugar molecule:

https://brainly.com/question/1793238

#SPJ11

The numerical value of Kc would depend on the concentration of CaCO3 at equilibrium, which is not provided in the given information. Without knowing the concentration of CaCO3 at equilibrium, it is not possible to determine the numerical value of Kc for the given reaction.

What is Equilibrium?

At equilibrium, the forward and reverse reactions occur simultaneously at the same rate, and the concentrations of reactants and products remain constant. This does not mean that the concentrations of reactants and products are necessarily equal, but rather that they do not change further.

The equilibrium constant, denoted as Kc, is a measure of the extent of a chemical reaction at equilibrium. It is defined as the ratio of the concentration of products to the concentration of reactants, with each concentration raised to the power of their respective stoichiometric coefficients.

The given reaction is: CaCO3(s) ⇌ CaO(s) + CO2(g)

At equilibrium, if the concentration of CO2 is 0.034 M, we can assume that the concentrations of CaO and CaCO3 are negligible compared to CO2 since they are in solid state. Therefore, the concentration of CO2 can be considered as the initial concentration of CO2 in the reaction.

Hence, the equilibrium expression for the given reaction would be:

Kc = [CO2] / [CaCO3]

Substituting the given concentration of CO2, we get:

Kc = [CO2] / [CaCO3] = 0.034 M / [CaCO3]

Learn more about Equilibrium from the given link

https://brainly.com/question/517289

#SPJ1

What is the numerical value of Kc for the following reaction if the equilibrium mixture at 800 degrees celsius contains 0.034MCO2?

CaCO3(s) ⇌ CaO(s) +CO2(g)

0.034 is the numerical value of Kc for the following reaction if the equilibrium mixture at 800 degrees celsius contains 0.034M CO2

Explain the equilibrium constant.

The value of a chemical reaction's reaction quotient at chemical equilibrium, a condition that a dynamic chemical system approaches when enough time has passed and at which its composition has no discernible tendency to change further, is the equilibrium constant for that reaction.

We can assume that CaO and CaCO3 concentrations are minimal in comparison to CO2 at equilibrium if the concentration of CO2 is 0.034 M because they exist in the solid state. As a result, the CO2 concentration can be thought of as the reaction's starting CO2 concentration.

Kc = [CO2]

[CO2] is 0.034M

Kc = [CO2]  = 0.034 M

To learn more about Equilibrium use

brainly.com/question/517289

#SPJ1

The different colors in Kaleidoscope Lane can be attributed to a mix of colorful objects, reflective surfaces, diverse light sources, and the interaction of colors, creating a visually captivating environment similar to the patterns seen in a kaleidoscope.

The different colors in Kaleidoscope Lane can be seen due to the combination of the following factors:
1. Colorful objects: The lane might be decorated with various colorful items like street art, murals, or decorations, which contribute to the vibrant colors seen in the area.
2. Reflection: A kaleidoscope is an optical instrument that uses mirrors to reflect light and create symmetrical patterns. In Kaleidoscope Lane, reflective surfaces or mirrored installations might be placed to bounce light off and create colorful patterns similar to those seen in a kaleidoscope.
3. Light sources: Different colored lights or filters might be installed in the lane to illuminate the surroundings, which results in a variety of colors being seen.
4. Interaction of colors: As light bounces off multiple surfaces and interacts with various colored objects in the lane, the colors blend and create new combinations, further contributing to the visual spectacle.

learn more about Kaleidoscope Refer: brainly.com/question/24359686

#SPJ11

Your answer: (a) Yes, regardless of the sign of ΔH, if ΔS is positive, a reaction can be rendered favorable by increasing the temperature.

A property whose value doesn't depend on the path taken to reach that specific value is known to as state functions or point functions. In contrast, those functions which do depend on the path from two points are known as pathThe fundamental thermodynamic equations follow from five primary thermodynamic definitions and describe internal energy, enthalpy, Helmholtz energy, and Gibbs energy in terms of their natural variables.

to know more about Helmholtz energy please vist :-

https://brainly.com/question/31540697

#SPJ11

It is not possible to have a non-zero pressure without any temperature, as pressure is a measure of the force per unit area exerted by gas molecules colliding with the walls of a container, and temperature is a measure of the average kinetic energy of those gas molecules.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance, such as atoms, molecules, or ions. It is a scalar quantity that quantifies the level of thermal energy or heat present in a system. Temperature determines the direction of heat flow, with heat generally flowing from hotter objects to cooler objects until thermal equilibrium is reached.

In general, pressure and temperature are related in the ideal gas law, which states that for an ideal gas, the pressure (P), volume (V), and temperature (T) are related by the equation PV = nRT, where n is the number of moles of gas and R is the ideal gas constant. According to this equation, pressure and temperature are directly proportional to each other, meaning that an increase in temperature typically results in an increase in pressure, assuming other variables such as volume and amount of gas remain constant.

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

Starting is one operational condition that a carburetor must be able to supply the proper fuel mixture for. The other four are  Idle, , Accelerator, variable load and speed operation.

Carburetor is the device that is used to mix fuel and air in an internal combustion engine. Its main objective is to provide quality air fuel for special operational requirements such as starting, idling, acceleration, adjusting variable load and speed operation.

The main disadvantage of float-type carburetor is its susceptibility to icing which occurs when there is fuel vaporization and decrease in air pressure in the venturi, which causes a sharp temperature drop in the carburetor. This fuel vaporization occurs within the cylinder of a fuel-injected engine and makes fuel injection system less susceptible to icing.

To know more about carburetor here

https://brainly.com/question/14305701

#SPJ4

The volume of a sample for coliform compliance is: 100 mL. The correct answer is option a.

This is because the EPA requires a minimum of 100 mL of water sample to be tested for coliform bacteria in order to comply with drinking water standards. Coliform bacteria are commonly found in the environment and can indicate the presence of harmful pathogens in drinking water.

Therefore, regular monitoring of coliform levels is essential to ensure that water is safe for human consumption.

It is important to note that the EPA also sets maximum contaminant levels (MCLs) for coliform bacteria, which are based on the number of colonies found in a specific volume of water. If the sample exceeds the MCL, further investigation and corrective action may be required to ensure the safety of the water supply.

In addition to coliform bacteria, other water quality parameters such as pH, turbidity, and disinfectant residual may also be monitored to ensure compliance with drinking water standards.

Therefore, option a is correct.

For more such questions on volume, click on:

https://brainly.com/question/29493123

#SPJ11

Polar protic solvents are preferable for Sn1 reactions because they are capable of stabilizing the intermediate carbocation and the leaving group through hydrogen bonding and solvation, thus promoting the reaction's rate and efficiency.

Polar protic solvents are preferable for Sn1 reactions because they have the ability to stabilize the carbocation intermediate that is formed during the reaction. The polar protic solvent can do this by solvating the carbocation through hydrogen bonding. This stabilization helps to lower the activation energy required for the reaction to occur, making it more favorable.

Additionally, the polar nature of the solvent helps to increase the rate of the reaction by facilitating the dissociation of the leaving group. Overall, the use of a polar protic solvent in Sn1 reactions can lead to increased yields and faster reaction rates.
learn more about Polar protic solvents  here: brainly.com/question/13144944

#SPJ11

The percentage yield of CO₂ is 98.8%.

From the equation, we can see that 1 mole of CH₄ produces 1 mole of CO₂. Therefore, the number of moles of CO₂ produced from 2.0 mol of CH₄ is

2.0 mol CH₄ × 1 mol CO₂ / 1 mol CH₄

= 2.0 mol CO₂

The molar mass of CO₂ is 44.01 g/mol, so the theoretical yield of CO₂ is

2.0 mol CO₂ × 44.01 g/mol

= 88.02 g CO₂.

The experimental yield of CO₂ is given as 87.0 g. The percentage yield is calculated as

percentage yield = (experimental yield / theoretical yield) × 100%

percentage yield = (87.0 g / 88.02 g) × 100%

= 98.8%

To know more about percentage yield:

https://brainly.com/question/29714892

#SPJ1

There have been no new nuclear reactors ordered by US utility companies in the US since 1976.The correct answer is option A.

This is a significant fact, considering that nuclear energy was once seen as the solution to the world's energy problems due to its low carbon emissions and high energy density. However, the nuclear disaster at Three Mile Island in 1979 and the Chornobyl disaster in 1986 changed the perception of nuclear power, making it less popular among the public.

Moreover, the cost of building and maintaining nuclear power plants is incredibly high, and the risk of accidents is always present. These factors, combined with the increasing availability and decreasing cost of renewable energy sources, have led many utility companies to focus on renewable energy instead of nuclear power.

However, in recent years, there has been renewed interest in nuclear energy as a potential solution to climate change. Many new nuclear reactor designs have been proposed that claim be safer and more efficient than traditional designs. Still, the high cost of building nuclear power plants remains a significant barrier to widespread adoption. Therefore, it is uncertain whether nuclear power will play a significant role in meeting future energy demands or not. The correct answer is option A.

To learn more about Nuclear :

https://brainly.com/question/29659168

#SPJ11

The most common cause for pipe joint failure (leaking) in newly laid pipe is not pushing the spigot end the full distance into the bell. The correct answer is option b.

This is a critical step in ensuring a proper and secure joint seal. If the spigot end is not fully inserted into the bell, there will be a gap between the two pipes which can allow water to escape or infiltrate the pipe. This can lead to various problems including reduced pipe capacity, erosion of soil around the pipe, and damage to nearby structures.

It is important to follow manufacturer guidelines and specifications when installing pipes to ensure that the joints are properly aligned and sealed.

In addition, having the joint completely cleaned and using a non-cracked gasket are also important factors in preventing pipe joint failure. The correct trench bedding angle is also important for maintaining the stability and alignment of the pipe.

Therefore, option b is correct.

For more such questions on leaking, click on:

https://brainly.com/question/18578027

#SPJ11

1 atomic mass unit (amu) is the approximate weight of one proton or one neutron, but is formerly defined as 1/16 the mass of a neutral oxygen-16 atom.

Atomic mass unit (amu) is the unit of mass which is used to express atomic and molecular weights. One atomic mass unit is defined as one-twelfth of the mass of an unbound atom of carbon-12, which is approximately 1.66054 × 10⁻²⁷ kg.

Neutral oxygen-16 is the most common isotope of oxygen, with 8 protons, 8 neutrons, and 8 electrons. Its atomic mass is 15.994915 amu, which means that one neutral oxygen-16 atom weighs approximately 15.994915 times the mass of one atomic mass unit (amu).

To know more about atomic mass unit here

https://brainly.com/question/489186

#SPJ4

--The given question is incorrect, the correct question is

"1 atomic mass unit is the approximate weight of one _______ but is Formerly defined as 1 / ____ the mass of a neutral _________ atom."--