Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because they can obstruct the airflow and hinder the unit's ability to condense and release heat properly, which can lead to reduced efficiency and potentially cause damage to the unit.
Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because this ensures proper airflow and prevents debris from obstructing the unit's functionality, thus maintaining its efficiency and prolonging its lifespan.
Learn more about branches here: brainly.com/question/14165530
#SPJ11
Ampere interrupting current (AIC) is for short circuit faults. They are meant to protect a device from _______ while trying to clear a fault.
Ampere interrupting current (AIC) is a critical rating that indicates the maximum amount of electrical current that a device, such as a circuit breaker or a fuse, can safely interrupt in the event of a short circuit fault.
A short circuit is a typical kind of electrical fault that develops when two conductors are connected in a low-resistance channel, which results in an excessive flow of electrical current.
By halting the flow of current, AIC serves to safeguard both the device and the electrical system, avoiding additional harm or risk.
Since a normal kernel mode action has a higher priority than a user mode activity during a trap interrupt, system activities are suspended. It transitions to user mode after the conclusion of the interruption.
The processor is immediately brought to attention by a hardware interrupt, which might come from peripheral devices, storage, or input/output devices.
Learn more about safely interrupt here
https://brainly.com/question/14690012
#SPJ11
Key control procedures are necessary because corrective measures associated with lost or uncontrolled keys can be costly and time consuming. True or False?
True. Key control procedures are crucial because lost or uncontrolled keys can result in security breaches, theft, and property damage.
The cost of rekeying locks, replacing lost keys, and addressing any resulting security breaches can be significant. Additionally, time may be lost waiting for replacements, and there is a risk of sensitive information or property being compromised. Key control procedures ensure that only authorized individuals have access to keys, and that the whereabouts of keys are tracked and accounted for. This helps prevent costly and time-consuming corrective measures associated with lost or uncontrolled keys.
learn more about security breaches here:
https://brainly.com/question/30300203
#SPJ11
Question 8 Marks: 1 What is the minimum period of wash time for a single-tank conveyer dishwashing machine?Choose one answer. a. 10 seconds b. 25 seconds c. 20 seconds d. 15 seconds
The minimum period of wash time for a single-tank conveyor dishwashing machine is typically 20 seconds. This is the time needed to properly wash and sanitize dishes, utensils, and other items that are being washed in the machine.
The dishwashing process involves several steps, including pre-rinsing, washing, rinsing, and sanitizing. Each step must be completed thoroughly to ensure that dishes are properly cleaned and safe to use. During the wash cycle, hot water is sprayed onto the dishes to remove any remaining food particles or debris. The temperature of the water and the length of time that it is sprayed onto the dishes are both critical factors in ensuring that the dishes are properly sanitized.
Learn more about machine here:
https://brainly.com/question/2641843
#SPJ11
Which publicly available resources describe protocols, processes, and technologies for the Internet but do not give implementation details?
These resources provide valuable information about protocols, processes, and technologies for the Internet but are not intended to provide implementation details.
Implementation details are typically provided in technical manuals, programming guides, and other resources specific to a particular implementation.There are several publicly available resources that describe protocols, processes, and technologies for the Internet but do not give implementation details. Some of these resources include:
1. Internet Engineering Task Force (IETF) Request for Comments (RFCs): These documents define the standards and protocols for the Internet. While they provide a detailed description of the protocol or technology, they do not provide implementation details.
2. Internet Society (ISOC) publications: ISOC publishes papers, reports, and articles on various topics related to the Internet, including protocols, processes, and technologies. These resources provide an overview of the topic but do not provide implementation details.
3. National Institute of Standards and Technology (NIST) publications: NIST publishes documents on various topics related to the Internet, including protocols, processes, and technologies. While they provide a detailed description of the topic, they do not provide implementation details.
4. IEEE publications: The Institute of Electrical and Electronics Engineers (IEEE) publishes papers and articles on various topics related to the Internet, including protocols, processes, and technologies. These resources provide an overview of the topic but do not provide implementation details.
Learn More about protocols here :-
https://brainly.com/question/27581708
#SPJ11
One electrical devices, the terminal to which grounded conductor is to be attached shall be substantially ______ in color. 200.9
One electrical devices, the terminal to which grounded conductor is to be attached shall be substantially Green in color. 200.9
In accordance with NEC section 200.9, the terminal to which the grounded (neutral) conductor is to be joined must be primarily green in colour or marked with the phrase "ground." This helps to prevent electrical shock or fire by making sure the grounded conductor is securely linked to ground. In the electrical sector, the colour green serves as a standard for grounding and makes it simple for electricians to locate the grounding connection. It is imperative to abide by this code for both safety and legal compliance concerns.
learn more about conductor here:
https://brainly.com/question/14405035
#SPJ11
Up and down counters may be programmed together to count up and down. true/false
True. Up and down counters can be programmed together to count up and down, allowing for a greater range of counting options.
An up counter is a digital circuit that counts from an initial value up to a maximum value. When the maximum value is reached, the counter resets to the initial value and starts counting again. For example, an up counter with an initial value of 0 and a maximum value of 7 would count 0, 1, 2, 3, 4, 5, 6, 7, 0, 1, 2, and so on.
Up and down counters can be programmed together to count both up and down. An up counter counts upwards from a starting value, while a down counter counts downwards from a starting value. By programming the two counters together, you can create a counter that can count up and down depending on the current direction setting.
Overall, programming up and down counters together can be useful in a variety of applications where counting both up and down is necessary, such as in digital clocks, timers, and other types of electronic devices.
Learn more about Up and down counters: https://brainly.com/question/29447930
#SPJ11
What should the temperature differential be between the evaporator inlet and _______________.
The temperature differential between the evaporator inlet and outlet is an important factor in the efficiency of a refrigeration system. The ideal temperature differential will vary depending on the specific system, but generally, the difference between the evaporator inlet and outlet temperatures should be between 5-15 degrees Fahrenheit.
For such more question on Fahrenheit
https://brainly.com/question/26141817
#SPJ11
A luminaire (lighting fixture) that weighs more than _____ pounds shall be supported independently of the outlet box.
314.27
A luminaire (lighting fixture) that weighs more than 50 pounds shall be supported independently of the outlet box, as stated in section 314.27 of the National Electrical Code.
This means that the fixture should be supported by a separate structural support that can handle the weight of the fixture, rather than relying on the outlet box alone. This is important for safety reasons and to ensure that the fixture is securely installed.A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.
Fixtures may also have a switch to control the light, either attached to the lamp body or attached to the power cable. Permanent light fixtures, such as dining room chandeliers, may have no switch on the fixture itself, but rely on a wall switch.
Fixtures require an electrical connection to a power source, typically AC mains power, but some run on battery power for camping or emergency lights. Permanent lighting fixtures are directly wired. Movable lamps have a plug and cord that plugs into a wall socket.
learn more about luminaire here:
https://brainly.com/question/24309468
#SPJ11
What action is possible with a static member function that isn't possible with an instance member function?
One action that is possible with a static member function that isn't possible with an instance member function is calling the function without an instance of the class.
This means that you can call a static member function directly on the class itself, without needing to create an instance of the class first. This can be useful for performing operations that don't depend on any specific instance of the class, such as utility functions or operations that apply to all instances of the class. Instance member functions, on the other hand, require an instance of the class to be created before they can be called.
Hi! A static member function can be called without creating an object of the class, whereas an instance member function requires an object to be created and called on that object. This makes static member functions more efficient in some cases, as they do not require object instantiation.
To know more about static member function, click here:
https://brainly.com/question/14863955
#SPJ11
Q5)e) What is the definition of a trailer?
A trailer is a type of vehicle that is typically towed behind a car or truck and is used for transporting goods or equipment. It is essentially a mobile unit that can be detached from the towing vehicle and left at a destination.
Trailers come in many different shapes and sizes, depending on their intended use. Some trailers are designed for carrying heavy loads, while others are intended for use as living spaces or for transporting recreational vehicles such as boats or motorcycles.
The term "trailer" can also refer to a short promotional video that is used to advertise a film or TV show. These trailers are typically shown in movie theaters or on TV and give viewers a preview of what to expect from the upcoming production. The trailer may include snippets of the film's storyline, key scenes, or footage of the actors in action.
Trailers are an important part of the film industry's marketing strategy, as they help to generate buzz and excitement for upcoming releases.
Learn more about trailer here: brainly.com/question/28927450
#SPJ11
The insulation on the conductors within type NM cable shall be rated at ______.
334.112
According to section 334.112 of the National Electrical Code (NEC), the insulation on the conductors within Type NM (non-metallic sheathed) cable shall be rated at a minimum of 90 degrees Celsius.
Type NM (Non-Metallic) cable, also known as Romex® cable, is a type of electrical cable used for indoor residential wiring applications. It typically consists of two or more insulated conductors, a bare or insulated ground wire, and a non-metallic outer sheath. The conductors are usually made of copper, and the outer sheath is typically made of PVC or similar material. Type NM cable is commonly used for branch circuit wiring in residential applications, such as powering lighting and receptacle circuits. It is easy to work with and install, and is designed to be used in dry locations only. In damp or wet locations, the use of moisture-resistant cables is required.
Learn more about Type NM here:
https://brainly.com/question/31566099
#SPJ11
Why is an understanding of electricity essential to the study of matter
An understanding of electricity is essential to the study of matter because electricity plays a fundamental role in the behavior of atoms and molecules.
Electricity is the flow of electrons, which are negatively charged particles that orbit around the nucleus of an atom. The behavior of electrons determines the properties of matter such as conductivity, magnetism, and reactivity. Without electricity, many of the technological advancements we rely on today, such as electronics and energy generation, would not be possible.
Additionally, an understanding of electricity is necessary in fields such as chemistry and physics, as it is often involved in chemical reactions and physical processes. Therefore, to fully understand matter and its properties, an understanding of electricity is necessary.
Learn more about electricity: https://brainly.com/question/776932
#SPJ11
the voltage through a resistor with current i(t) in the s-domain is sri(s). true or false
True. In the s-domain, the voltage across a resistor with current i(t) flowing through it can be represented as s times the product of the resistance R and the current i(t), which is equal to sri(s). This is known as the impedance of a resistor in the s-domain.
The Laplace transform takes a continuous time signal and transforms it to the s
-domain.
The Laplace transform is a generalization of the CT Fourier Transform. Let X(s)
be the Laplace transform of x(t)
, then the Fourier transform of x
is found as X(jω)
For most engineers (and many fysicists) the Laplace transform is just a mathematical trick to easily solve a class of partial differential equations. The Laplace transforms a constant coefficient linear differential equation relating the input x(t)
with the output y(t)
into an algebraic polynomial in s
. We will look at this class of constant coefficient linear partial differential equations.
learn more about impedance here:
https://brainly.com/question/30040649
#SPJ11
Hi!
The statement is false.
The voltage across a resistor with current i(t) in the s-domain is given by V(s) = R*I(s), where R is the resistance and I(s) is the Laplace transform of the current i(t).
Learn more about resistance and current: https://brainly.com/question/24858512
#SPJ11
When plate electrodes are used for grounding, each electrode shall be expose a minimum of _____ of surface to exterior soil.
250.53(7)
According to the National Electrical Code (NEC) section 250.53(7), when plate electrodes are used for grounding, each electrode shall be exposed to a minimum of "2 square feet" of surface area to exterior soil.
Grounding is the process of connecting electrical equipment or systems to the earth, or to a conductor that is connected to the earth, for safety and functional purposes. Grounding helps to protect people and equipment from electrical shocks by providing a low-resistance path for electrical current to flow to the earth. It also helps to reduce electrical noise and interference in electronic equipment by providing a stable reference point for electrical signals. Proper grounding is an essential part of electrical safety and is required by building codes and regulations. Grounding can be achieved through a variety of methods, including grounding rods, grounding plates, and grounding wires. It is important to follow proper grounding procedures to ensure the safety and proper functioning of electrical systems.
Learn more about grounding here:
https://brainly.com/question/30242004
#SPJ11
3) Auditing standards for public companies are established by the
A) SEC.
B) FASB.
C) PCAOB.
D) IRS.
Based on this information, the answer to your question is: **C) PCAOB**. Auditing standards for public companies are established by the PCAOB.
Auditing standards provide a framework for ensuring the quality, consistency, and credibility of the audit process and the audit report.
In the United States, there are different sets of auditing standards for different types of audits and entities. For public companies, which are companies that issue securities to the public and are subject to the oversight of the Securities and Exchange Commission (SEC), the auditing standards are established by the Public Company Accounting Oversight Board (PCAOB). The PCAOB is a nonprofit corporation that was created by the Sarbanes-Oxley Act of 2002 (SOX) to protect investors and the public interest by regulating the audits of public companies and other issuers⁵.
According to the PCAOB website, the PCAOB establishes auditing and related professional practice standards for registered public accounting firms to follow in the preparation of audit reports for public companies and other issuers, such as broker-dealers. The PCAOB also oversees the compliance of these firms with its standards and rules, as well as with applicable laws and regulations.
Therefore, based on this information, the answer to your question is: **C) PCAOB**. Auditing standards for public companies are established by the PCAOB.
Learn more about PCAOB here:
brainly.com/question/30895176
#SPJ11
Needle valve points in the carburetor float chamber are usually made from one of two materials. What are the two materials?
The needle valve is an important component of a carburetor that controls the flow of fuel from the float chamber into the engine. It consists of a pointed needle that sits against a seat in the float chamber and moves up and down to regulate the fuel flow.
For such more question on carburetor
https://brainly.com/question/31562313
#SPJ11
For permanently connected appliances rated at not over ______ horsepower, the branch circuit over current device shall be permitted to serve as the disconnectiong means.
422.31
For permanently connected appliances rated at not over 1/8 horsepower, the branch circuit overcurrent device shall be permitted to serve as the disconnecting means, according to section 422.31 of the National Electrical Code (NEC).d
For permanently connected appliances rated at not over 1 horsepower, the branch circuit over current device shall be permitted to serve as the disconnecting means, as stated in section 422.31. This means that the over current device, such as a circuit breaker or fuse, can be used to both protect the circuit and serve as a means to disconnect power to the appliance. However, it is important to note that this only applies to appliances that are permanently connected and not intended to be moved or unplugged frequently.Permanently-connected (hard-wired) appliances are intended to be wired using National Electrical Code (NEC) compliant wiring methods by qualified personnel in accordance with the NEC.
learn more about connected appliances here:
https://brainly.com/question/18713901
#SPJ11
In the _____ process, all of the data from various sources is converted into a single format suitable for processing.
a) load
b) transform
c) consolidate
d) extract
In the data integration process, all of the data from various sources is converted into a single format suitable for processing.
Data integration is the process of combining data from different sources into a unified view. This process involves collecting, merging, and transforming data from disparate sources such as databases, spreadsheets, and other data repositories. The data is then converted into a single format suitable for processing, making it easier for data analysts and scientists to work with the data. Data integration helps to eliminate data silos, improve data quality, and ensure consistency across the entire organization. It is a crucial step in creating a unified view of data that can be used to make informed business decisions.
Learn more about Data integration is the process here:
https://brainly.com/question/17203177
#SPJ11
Q6) a) How long are Ethernet EUI-48 addresses?
Answer: Ethernet EUI-48 addresses are 48 bits long, which equates to 6 bytes. These addresses are unique identifiers assigned to network devices and are used for communication on the Ethernet network.
Explanation: Ethernet EUI-48 addresses, also known as MAC addresses, are 48 bits long. These addresses are usually represented in hexadecimal format, which means that they consist of 12 characters (each character representing 4 bits). EUI-48 addresses are unique identifiers for network devices, allowing them to communicate with each other on an Ethernet network.
#SPJ11
Design Specification;
Workshop Area = 1000 sq.ft, Wind Velocity = 99.42 mph, Allowable tensile strength =20 ksi. Now, Find the support reaction.
In an EFI system, the volume of air intake is measured by what?
In an EFI (Electronic Fuel Injection) system, the volume of air intake is measured by a device called the Mass Airflow Sensor (MAF sensor).
The MAF sensor measures the amount of air entering the engine and sends this information to the engine control unit (ECU). The ECU then adjusts the amount of fuel injected into the engine based on the information received from the MAF sensor, ensuring that the engine runs efficiently and smoothly.
In an EFI (Electronic Fuel Injection) system, the volume of air intake is measured by the Mass Air Flow (MAF) sensor.
Learn more about injected here
https://brainly.in/question/5097696
#SPJ11
What are the six slip systems of a simple cubic structure? A slip system consists of a slip plane and a slip direction. The direction needs to be parallel to or on the plane
The six slip systems of a simple cubic structure are;
{100} <100>
{010} <010>
{001} <001>
{100} <010>
{100} <001>
{010} <001>
What are the slip systems?In a simple cubic crystal structure, there are six possible slip systems that allow for plastic deformation to occur. The slip systems consist of a slip plane and a slip direction.
The slip planes in a simple cubic structure are the {100}, {010}, and {001} planes, which correspond to the three orthogonal crystallographic directions. The slip directions are [100], [010], and [001], which are parallel or perpendicular to the respective slip planes.
Read more about slip systems at: https://brainly.com/question/30166461
#SPJ1
(344-42(A)) Where threadless couplings and connectors used with rigid metal conduit are buried in masonry or concrete, they shall be of the_____ type.
When threadless couplings and connectors are used with rigid metal conduit and buried in masonry or concrete, they shall be of the concrete-tight type. This is specified in article 344-42(A) of the National Electrical Code (NEC). The concrete-tight type of coupling or connector ensures that no moisture or other substances can penetrate the conduit system and potentially damage the electrical components. Threadless couplings and connectors are designed to provide a strong and secure connection between sections of rigid metal conduit, without the need for threading. This makes installation faster and easier, as well as reducing the risk of damage to the conduit.
In summary, when using threadless couplings and connectors with rigid metal conduit in masonry or concrete, ensure they are of the concrete-tight type to maintain a secure and moisture-resistant connection.
Learn more about concrete here: brainly.com/question/28903866
#SPJ11
The on-delay timer (TON) starts timing when the timer's:a. ladder rung switches from false to true.b. ladder rung switches from true to false.c. accumulated value equals its preset valued. accumulated is greater than its present value
The on-delay timer (TON) starts timing when the timer's ladder rung switches from false to true. Option a is answer.
The ladder logic rung is the condition that must be met in order for the timer to start timing. In the case of an on-delay timer (TON), the ladder rung must be false when the input is first activated, and then switch to true for the timer to begin timing.
Once the ladder rung becomes true, the timer starts counting and will continue to do so until the accumulated value equals or exceeds the preset value. Once the accumulated value reaches the preset value, the timer output switches from false to true.
Therefore, option (a) is the correct answer: the on-delay timer (TON) starts timing when the ladder rung switches from false to true.
You can learn more about ladder logic at
https://brainly.com/question/15061805
#SPJ11
Using public set methods provides data integrity if:
a. a. The instance variables are public.
b. b. The instance variables are private.
c. c. The methods perform validity checking.
d. d. Both b and c.
Using public set methods to access and modify instance variables that are private ensures that the data integrity of the object is maintained.
Using public set methods to access and modify instance variables that are private ensures that the data integrity of the object is maintained. This is because private instance variables cannot be accessed or modified directly from outside the class, and therefore can only be accessed or modified through the public set methods. Additionally, if the set methods perform validity checking on the data being set, this further ensures that the object's data remains consistent and valid.
Learn more about data integrity here
https://brainly.com/question/31076408
#SPJ11
When servicing a central HVAC system's air distribution network, _______________.
A. Check for obstruction and sufficient airflow.
B. Clean and sanitize ductwork as needed.
C. Inspect all duct work for leaks and broken dampers.
D. All of the above.
Servicing a central HVAC system's air distribution network, it is important to perform all of the above tasks to ensure that the system is functioning properly and efficiently. D
Servicing a central HVAC system's air distribution network, All of the above.
The system is functioning properly and efficiently.
This involves checking for obstruction and sufficient airflow, cleaning and sanitizing ductwork as needed, and inspecting all ductwork for leaks and broken dampers.
The first step in servicing a central HVAC system's air distribution network is to check for any obstruction or blockages in the system.
This can include anything from debris buildup in the ductwork to a dirty air filter.
It is important to ensure that there is sufficient airflow in the system to maintain proper operation and prevent any damage or malfunctions.
Next, cleaning and sanitizing the ductwork is an important step in ensuring that the air being circulated throughout the system is clean and free from any contaminants.
Over time, ductwork can become dirty and contaminated with mold, bacteria, and other harmful particles that can affect indoor air quality.
Regular cleaning and sanitizing can help prevent these issues and maintain a healthy living environment.
Finally, inspecting all ductwork for leaks and broken dampers is crucial in preventing any air leakage from the system.
Leaks and broken dampers can cause a loss of efficiency and an increase in energy costs.
By inspecting and repairing any damage, you can help maintain the efficiency of the system and prevent any unnecessary expenses.
Servicing a central HVAC system's air distribution network, it is important to perform all of the above tasks to ensure that the system is functioning properly and efficiently.
By checking for obstruction and sufficient airflow, cleaning and sanitizing ductwork as needed, and inspecting all ductwork for leaks and broken dampers, you can maintain a healthy and comfortable living environment while also reducing energy costs.
For similar questions on HVAC
https://brainly.com/question/535850
#SPJ11
3. Something that request data from a server is known as a _______?A. SwitchB. RouterC. ServerD. Client
The correct answer is D. Client. A client is a computer program or device that requests data or services from a server over a network. The client sends a request to the server and waits for a response. The server processes the request and sends a response back to the client.
Examples of clients include web browsers, email clients, FTP clients, and instant messaging clients. These programs connect to a server over a network to access data or services.
In contrast, a server is a computer program or device that provides data or services to clients over a network. Servers are designed to handle multiple client requests simultaneously and to provide resources to those clients. Examples of servers include web servers, mail servers, file servers, and database servers.
A switch and router are network devices that facilitate the transfer of data between devices on a network. A switch connects devices on a local network and directs data packets to their destination. A router connects different networks and routes data between them. While switches and routers are important components of a network infrastructure, they are not involved in client-server communication.
Learn more about database here:
https://brainly.com/question/30634903
#SPJ11
A DIMM that contains memory chips in two memory banks on the module is said to be ______.
A DIMM that contains memory chips in two memory banks on the module is said to be dual-bank.
Dual-bank DIMMs are a type of memory module that is commonly used in computer systems. The memory chips on the DIMM are divided into two banks, which can be accessed independently by the memory controller. This allows for more efficient memory access and improved performance compared to single-bank DIMMs. Dual-bank DIMMs are available in a variety of types and speeds, including DDR, DDR2, DDR3, and DDR4, and are used in desktop and laptop computers, servers, and other devices that require high-performance memory.
You can learn more about DIMM at
https://brainly.com/question/31567696
#SPJ11
5210-1 - To maintain a standard rate turn as the airspeed increases, the bank angle of the aircraft will need to:- remain constant-increase-decrease
In order to maintain a standard rate turn as airspeed increases, the bank angle of the aircraft will need to decrease. This is because as airspeed increases, the aircraft generates more lift and requires less bank angle to maintain a constant turn rate.
Conversely, as airspeed decreases, the aircraft generates less lift and requires more bank angle to maintain a constant turn rate. Therefore, to maintain a standard rate turn, pilots must adjust the bank angle based on the current airspeed of the aircraft.
.
A standard rate turn is a 360-degree turn completed in 2 minutes, resulting in a turn rate of 3 degrees per second. As airspeed increases, the aircraft's radius of turn also increases. To maintain the same turn rate (standard rate) while the airspeed is increasing, the bank angle must increase to compensate for the larger radius of the turn. This ensures that the aircraft continues to turn at 3 degrees per second, maintaining the standard rate of turn.
Learn more about the airspeed here:-brainly.com/question/29597908
#SPJ11
The length of the suitable coat and cable assemblies approved for extra hard usage for branches from bus-ways for the connection of equipment shall not exceed ________ feet.
368.17(b)(7)
The length of the suitable coat and cable assembly approved for extra hard usage for branches from busways for the connection of equipment shall not exceed 6 feet. This is according to NEC section 368.17(b)(7).
Based on the National Electrical Code (NEC) section 368.17(B)(7), the length of the suitable coat and cable assemblies approved for extra hard usage for branches from busways for the connection of equipment shall not exceed 6 feet.
A wiring is a group of wires arranged in a unit for a specific purpose. Cable assemblies are also called wiring harnesses or plumbing. These cables are bundled together in length and direction to make installation easier and faster. A cable assembly is a group of wires or cables connected to a unit. The purpose of this product is to provide power from many different cables while arranging them in a package that is easy to install, replace and manage.
Learn more about cable assembly:
brainly.com/question/30831285
#SPJ11