Oxygen has oxidation state of -2 in most compounds, but it can have different oxidation states in some compounds. In peroxide (O₂²⁻), oxygen has an oxidation state of -1
What is meant by nomenclature?Nomenclature is the system of naming chemical compounds according to a set of rules.
In peroxide (O₂²⁻), oxygen has an oxidation state of -1. This is because the two oxygen atoms share the two electrons that make up the covalent bond equally, resulting in an oxidation state of -1 for each oxygen atom.
So, while oxygen in peroxide has a charge of 2-, it does not have a 2- charge in general.
As for nomenclature, when naming compounds containing oxygen, the oxidation state of the oxygen atom is usually indicated by using a suffix. For example, the suffix "-ite" indicates a lower oxidation state, while the suffix "-ate" indicates a higher oxidation state.
To know more about nomenclature, refer
https://brainly.com/question/30586533
#SPJ1
Use the kinetic-molecular theory to explain each observation given.
a. Wax melts near the flame of a burning candle.
b. Liquid water may be converted into ice cubes in a freezer.
c. Ginger ale flows to match the shape of a glass.
d. Water gradually evaporates from a swimming pool.
e. Water vapor condenses inside house windows on cold days.
f. Snow gradually disappears, even when the tem- perature remains below freezing. g. Solids and liquids cannot be compressed as much as gases.
a. Wax melts near the flame of a burning candle because the kinetic-molecular theory states that the higher the temperature, the faster the molecules move. Since the flame of a burning candle is hot, the wax molecules move faster, allowing them to take up more space and eventually melt.
What is kinetic-molecular theory?The kinetic-molecular theory is based on the following five fundamental principles:
The average distances between the molecules that make up a gas are substantially bigger than the diameters of the individual molecules. When compared to the volume of the gas itself, the volume filled by the gas' molecules is insignificant.
In a perfect gas, neither the molecules nor the container walls are attracted to one another.
The molecules move randomly and continuously and, as physical objects, they are subject to Newton's laws of motion. Until they collide with one another or the container walls, the molecules move in a straight line.
Collisions are fully elastic; although two molecules' orientations and kinetic energies change when they collide, the overall kinetic energy is conserved. It is not "sticky" to collide.
The relationship between the average gas molecule kinetic energy and absolute temperature is direct. The word "average" is crucial in this context because individual molecules' velocities and kinetic energy will vary widely, with some even having zero velocities at specific times. This suggests that if the temperature were to drop to absolute zero, all molecular motion would stop.
Explanation:
b. Since a freezer is much colder than room temperature, the water molecules move very slowly and become organized, allowing them to form ice cubes.
c. All matter is made up of many small particles that are in constant motion. When the ginger ale is poured into the glass, the molecules of the liquid spread out to fill the shape of the glass due to their motion.
d. The molecules in a liquid are in constant motion, and that when they move, they bump into each other, passing energy from one to the other. This energy causes the particles to move faster. As they move faster, they create turbulence that causes them to break away from the liquid surface. These particles then form a vapor, which is an invisible form of water called water vapor. As these particles accumulate together, they gradually evaporate from the swimming pool, eventually diminishing its water level.
e. Water vapor condenses inside house windows on cold days because the molecules of water vapor slow down and as they lose energy they no longer have enough kinetic energy to remain in the gaseous state. The molecules then condense and form liquid water droplets on cool surfaces such as windows.
f. Snow gradually disappears even when the temperature remains below freezing because the heat stored in the snow starts to melt the snow. This occurs even when the outside temperature remains at freezing or below because the heat is released from the snow and warms the surrounding air.
g. Solids and liquids cannot be compressed as much as gases because the particles of gases have more energy and thus more freedom of movement than particles of solids and liquids. The particles of gases can move around and can occupy larger spaces than particles of solids and liquids, allowing them to be compressed more effectively.
To know more about kinetic energy, visit:
https://brainly.com/question/15764612
#SPJ1
Calculate the number of molecules of Freon-12 in 4.75 mg of Freon-12. What is the mass of chlorine in 4.75 mg of Freon-12?
The mass of chlorine in 4.75 mg of Freon-12 is approximately 1.39 x [tex]10^{-3}[/tex]g.
What is Mass?
Mass is a fundamental property of matter that measures the amount of substance or material present in an object. It is a scalar quantity and is typically measured in units such as grams (g) or kilograms (kg) in the metric system, or pounds (lb) or ounces (oz) in the imperial system.
Freon-12, also known as dichlorodifluoromethane, is a chlorofluorocarbon (CFC) compound that was used as a refrigerant and propellant in aerosol products. Its chemical formula is CCl2F2.
The atomic masses of carbon (C), chlorine (Cl), and fluorine (F) are approximately 12.01 g/mol, 35.45 g/mol, and 18.998 g/mol, respectively.
The molar mass of Freon-12 (CCl2F2) is:
Molar mass of Freon-12 = 12.01 g/mol (C) + 2 x 35.45 g/mol (Cl) + 2 x 18.998 g/mol (F)
= 120.91 g/mol
Next, we use the formula:
moles = mass / molar mass
to calculate the number of moles of Freon-12 in 4.75 mg:
moles of Freon-12 = 4.75 mg / 120.91 g/mol
= 3.92 x 10^-5 mol
Finally, we use Avogadro's number to calculate the number of molecules of Freon-12:
Number of molecules = moles of Freon-12 x Avogadro's number
= 3.92 x[tex]10^{-5}[/tex] mol x 6.022 x[tex]10^{23[/tex] molecules/mol
= 2.35 x [tex]10^{19}[/tex] molecules
To calculate the mass of chlorine in 4.75 mg of Freon-12, we can use the molar mass of chlorine (Cl) and the moles of Freon-12 calculated above.
The molar mass of chlorine (Cl) is 35.45 g/mol.
Mass of chlorine in Freon-12 = moles of Freon-12 x molar mass of chlorine
= 3.92 x [tex]10^{-5}[/tex] mol x 35.45 g/mol
= 1.39 x [tex]10^{-3}[/tex] g
Learn more about Mass from the given link
https://brainly.com/question/86444
#SPJ1
cl-+peg=hcl+peg rate law, rate constant k
a. The rate law for this reaction is: Rate = k[Cl] [H₂]. This means that the rate of the reaction is directly proportional to the concentrations of both Cl and H₂ molecules.
What is rate law?Rate law is an equation that describes the rate of a chemical reaction as a function of the concentrations of reactants. The rate law allows us to describe how the rate of a reaction changes when the concentrations of reactants are changed. It is derived from the rate equation, which is a mathematical expression that can be used to calculate the rate of a reaction from the concentrations of the reactants and the rate constant.
b. The rate law for this reaction is: Rate = k[O] [Os]. This means that the rate of the reaction is directly proportional to the concentrations of both O and Os molecules.
c. The rate law for this reaction is: Rate = k[NO₂]₂. This means that the rate of the reaction is directly proportional to the square of the concentration of NO₂ molecules.
To learn more about rate law
https://brainly.com/question/16981791
#SPJ1
Complete Question:
How many grams of NO will be produced, if 18.93g of H2O are also produced in the reaction below?
If 18.93g of H₂O are also produced in the reaction, then 21.04 grams of NO will be produced.
What is meant by reaction?Reaction is such a process that involves transformation of one or more substances into a new substances.
Assuming NH₃ is limiting reagent, let's calculate the amount of NH₃ from the given mass of H₂O produced:
Molar mass of H₂O is 18.015 g/mol;
So, 18.93 g H₂O ÷18.015 g/mol H2O= 1.0515 mol H₂O
As the mole ratio of NH₃ to H2O is 4:6, we can calculate the number of moles of NH₃ :
1.0515 mol H₂O × (4 mol NH₃ / 6 mol H₂O) = 0.701 mol NH₃
0.701 mol NH₃ × (4 mol NO / 4 mol NH₃ ) = 0.701 mol NO
0.701 mol NO × 30.01 g/mol NO = 21.04 g NO
Therefore, 21.04 grams of NO will be produced.
To know more about reaction, refer
https://brainly.com/question/25769000
#SPJ1
Amount of CuO formed when 63.5 g of copper is heated strongly in air is:
Amount of Cuo formed when 63.5g of copper is heated strongly in air is
A:The mass of CuO formed when 63.5g of Copper is heated strongly in air is 79.5g
1.How do we determine the mass of Cuo formed ?
For that we have to write the balenced equation of the reaction and it is given below
2Cu + O2 -----> 2CuO
We have to determine mass of Cuo formed from the reaction
Molar mass of Cu = 63.55 g/mol
Mass of Cu from balenced equation = 2*63.55 = 127.1 g
Molar mass of CuO = 79.55 g/mol
Mass of Cuo from balenced equation = 2*79.55 = 159.1g
From balenced equation 127.1g of Cu reacted to form 159.1 g of CuO
Thus ,63.5 g of Cu will react to form = (63.5*159.1)/127.1 = 79.5 g
Mass of CuO formed is 79.5 g
2.How do you find the mass of a compound produced ?
Multiply atomic weight from periodic table of each element by the number of atoms of that element present in the compound . Add it all together and put units of grams/mole after the number
to know more about mass produced visit :
brainly.com/question/9526265
#SPJ1
Determine the freezing point of an aqueous solution that is 0.24 m in sucrose.
Do you think there would be any difference in conductivity between a solution, a solution 10x more concentrated, and a solution 10x less concentrated?
Diluting a solution increases the amount of ions in the solution and gives them more room to move about, which increases the mobility of the ions and raises the molar conductivity in the solution at the same time.
What is a remedy?A solute dissolving agent, used to create homogenous mixtures. To create a homogenous mixture, a solute must dissolve in a solvent.Although solutions of both solids and gases are possible, the term "solution" is most frequently used to refer to the liquid condition of matter.
To know more about a remedy visit :
https://brainly.com/question/3637358
#SPJ1
What is the volume of a 3.00 M solution made with 4.70 moles of LIF?
Consequently, 1.57 litres is the volume of a 3.00 M solution prepared using 4.70 moles of LIF.
Why is 1.5 M solution important?Probably the most often used unit of measurement for solution concentration is molarity, abbreviated as (M). The ratio of the number of litres of solution to the number of moles of solvent is known as molarity. For instance, we may use the terms "1.5 molar solution" or "1.5 M" to describe a solution.
To calculate the volume of a 3.00 M solution made with 4.70 moles of LIF, we can use the formula:
Molarity is equal to the moles of solute times the litres of solution.
Rearranging the formula to solve for the volume of the solution, we get:
Volume of solution = moles of solute ÷ (Molarity x 1000)
Where 1000 is the conversion factor from milliliters to liters.
Plugging in the values given, we get:
Volume of solution = 4.70 moles ÷ (3.00 mol/L x 1000)
Volume of solution = 1.57 L
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
In the chemical reaction below, how many grams of KCN will react with 8.55g of H2SO4?
In this reaction, 8.55 grammes and 11.34 grammes of KCN will react.KCN's molar mass, 65.12 g/mol, is equal to its molecular mass, or mass of KCN, which is equal to 0.1744 mol.
What best sums up a reaction?Something that occurs in response to another event is called a reaction. A reaction is an procedure where any number of compounds are changed into other substances in science. This occurs when chemical bonds are broken & new ones are formed.
What does the word "reaction" mean in practise?They responded favourably to the news. He expressed disbelief when I first informed him what had transpired. Most attendees at the conference reacted to the announcement with anger or shock. When I initially met him, I didn't believe he was trustworthy.
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ1
Please tell me the reagent
Alkene is transformed to alcohol via the oxymercuration-demercuration reaction. The reagent employed in this reaction is mercury (II) acetate in tetrahydrofuran, which also serves as the solvent.
Oxymercuation-demercuration The result of 2-methyl-2-butene oxymercuration-demercuration is 2-methyl-2-butanol.Oxymercuration-demercuration is the electrophilic activation of an alkene by a mercuric acetate group. It is then followed by the addition of water and, finally, reductive demercuration by sodium borohydride.In the first step, an electrophilic HgOAc+ ion is added to the double bond, yielding mercurinium ion.In the second stage, the species combines with a nucleophilic water molecule. A bonding of a HgOAc group and an OH group arises on the nearby carbon atoms as a result of this nucleophilic attack.The final product involves the Markovnikov addition reaction.For more information on Oxymercuation-demercuration kindly visit to
https://brainly.com/question/28267457
#SPJ1
Example Scenario:
Leah finished her lunch. All that is left is her plastic sandwich bag. Lea thinks there is no longer anything in the bag, but Paul disagrees. He thinks the bag is filled with air and air is something.
They decide to test their ideas by measuring and comparing the mass and volume of an empty flat and sealed plastic bag with one that has been inflated with air and sealed. Lea thinks that matter does not exist if it cannot be seen. Paul thinks matter can exist even when it's not visible.
Here is the data they collected:
Using the claims below:
a. Select the one that you feel is the most clear, concise and complete
b. Explain why
Claim A: According to the data, matter can exist even when it's not visible, the increased mass and volume of the inflated bag show this clearly.
Claim B: Matter can exist even when it's not visible.
Claim C: Yes
Claim D: Matter can exist when it is visible but may or may not when it is invisible.
The most clear, concise and complete Claim is Claim A.
Claim A: According to the data, matter can exist even when it's not visible, the increased mass and volume of the inflated bag show this clearly.
Is there something with mass that occupies space and is discernible as matter?Everything with mass and spatial requirements is considered matter. It contains all of the constituent parts of a substance, such as its molecules, atoms, and fundamental particles. Physical and chemical changes can cause matter to transform into different forms, but no matter what happens, matter is always conserved.
What attribute of matter is being illustrated when a balloon that is empty is filled with air and its mass increases?The air-filled balloon thus swells in size and expands, providing a superb illustration of Boyle's rule! When the balloon filled with water, the effects appear different. Even if you press down on the plunger to compress the air in the syringe, the water in the balloon is not compressed.
Claim B lacks a particular reference to the information gathered in the scenario and is a little too vague.
Claim C is deficient and offers no details or justification.
Claim D lacks a clear conclusion, is a little ambiguous, and does not make any mention of the particular information gathered in the scenario.
To know more about the matter visit:
https://brainly.com/question/3998772
#SPJ1
For the reaction A+2B→C 5 moles of A and 8 moles of B produce
The students in the science class work together to model the sun, other stars, and Earth. The student who is modeling Earth stands in the center of the room. The students who model the stars each stand against the walls of the room. Each of these students holds a flashlight. The student who models the sun also holds a flashlight.
Where should the student who models the sun stand?
Answer:
The student who models the sun should stand somewhere in the room between Earth and the stars. The exact location will depend on how the students have chosen to set up the model and the relative distances they have assigned to each object. However, a common location for the sun model in this type of model is near one of the walls of the room, at a distance that is proportionally farther away from Earth than the stars. This is because the sun is much larger than any other object in our solar system and is located at the center of it, while the stars are much farther away. The student who models the sun should also be holding a flashlight, as the sun is a source of light and heat for our planet and the other planets in our solar system.
Answer: very close to Earth.
Explanation: I took the test the 2nd answer" to Question
The sun releases a huge amount of energy.
About what fraction of this energy reaches Earth? "
is :
one-billionth
Draw a Lewis structure for CO32–, SF4 and HCOOH (formic acid)
The Lewis structures are shown by dots in the images attached here.
What is Lewis structure?A Lewis structure, also known as a Lewis dot diagram, is a visual representation of the bonding between atoms or ions in a molecule. It was developed by American chemist Gilbert N. Lewis in 1916. In a Lewis structure, the chemical symbol of each atom is surrounded by a set of dots, representing the valence electrons of the atom.
These dots are arranged to indicate the sharing or transfer of electrons between atoms, and the resulting arrangement of atoms and electrons is shown as a molecular structure.
Lewis structures are useful for predicting the shape, polarity, and reactivity of molecules and for understanding the principles of chemical bonding.
Learn more about Lewis Structure:https://brainly.com/question/20300458
#SPJ1
CHEMISTRY IN INDUSTRY, HEALTH, FOOD, LIFE, and the ENVIRONMENT
This assignment gives us an opportunity for us to engage and continue to dialogue with one another. We will explore the role of chemistry in our everyday life, as it pertains to industry, health, and the environment. Chemistry can help us to understand, monitor, protect, and improve the environment around us. Chemists use analytical tools and techniques to assess and measure air and water pollution due to environmental chemicals. This has helped to build the evidence that shows how our climate has changed over time. In drug and food development chemistry has a major cornerstone to foster the treatment of illnesses and wellness and to foster the availability of food.
Have a look at the following two Figures attached and use the periodic table of elements and natures in addition to your own research and reflect on how you see the chemistry and its application. Your task, select an aspect that is of interest to you and write a short reflection on how you currently perceive chemistry,
Food, clothing, shelter, health, energy, and clean air, water, and soil are all dependent on chemistry. Chemical technologies improve our quality of life in a variety of ways by solving problems in health, materials, and energy utilization.
Chemistry in everyday lifeChemistry is important in the development of technological solutions. Chemists contribute to lower transportation emissions in a variety of ways, from generating cleaner fuels (such as low sulfur fuels) to enhancing engine efficiency.Environmental chemistry examples include: Counting the amount of pollutants in a sample of water or soil. Using chemistry knowledge to offer alternative ecologically acceptable compounds for usage in products. Creating chemicals with functionalities that replace poisons.For more information on chemistry in everyday life kindly visit to
https://brainly.com/question/4865875
#SPJ1
Question 4 (1 point)
Members of the alkaline earth elements have several things in common.
They are metalloids with two valence electrons.
metals that are not very reactive.
nonmetals and are nonreactive.
metals with two valence electrons.
Answer:
Explanation:
Alkaline earth elements are a group of six chemical elements in group 2 of the periodic table. They are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). These elements have very similar properties: they are all shiny, silvery-white, somewhat reactive metals at standard temperature and pressure.
The correct statement about alkaline earth elements is that they are metals with two valence electrons. They readily lose these two electrons to form cations with a charge of +21.
Which of the following reactions is associated with the lattice energy of MgSe (ΔH°latt)?
Mg(s) + Se(s) → MgS(s)
Mg2⁺(g) + Se2⁻(g) → MgSe(s)
Mg2⁺(aq) + Se2⁻(aq) → MgSe(s)
MgS(s) → Mg(s) + Se(s)
MgSe(s) → Mg2⁺(aq) + Se2⁻(aq)
Answer: Mg2⁺(g) + Se2⁻(g) → MgSe(s)
Explanation: This response includes the arrangement of one mole of MgSe(s) from its constituent vaporous particles, and the discharge of cross section vitality. The other responses recorded don't include the arrangement of MgSe from its constituent particles within the gas stage, so they are not related with the grid vitality of MgSe.
What is the molar solubility, S, of AgC, H; 02 if Ksp = 2.00 × 10-3?
The molar solubility of AgC, H; 02 is 0.0447 mol/L..
What is Molar Solubility?
Molar solubility refers to the maximum amount of a solute that can dissolve in a given amount of solvent at a particular temperature to form a saturated solution, usually expressed in moles per liter (mol/L or M). It is a measure of the solubility of a compound under specific conditions, such as temperature and pressure.
Molar solubility is an important parameter in chemistry and is often used to describe the solubility behavior of ionic compounds, salts, and other substances in various solvents.
Ksp = [tex]S^{2}[/tex]
Substituting the given value of Ksp, we get:
2.00 × [tex]10^{-3}[/tex] =[tex]S^{2}[/tex]
Taking the square root of both sides, we get:
S = √(2.00 × [tex]10^{-3}[/tex])
S = 0.0447 mol/L (rounded to four significant figures)
Therefore, the molar solubility of AgC, H; 02 is 0.0447 mol/L.
Learn more about Molar Solubility from the given link
https://brainly.com/question/28202068
#SPJ1
0.0447 mol/L is the molar solubility, S, of AgC, H; 02 if Ksp = 2.00 × 10-3
Explain equilibrium constant.
A dynamic chemical system approaches chemical equilibrium when enough time has passed and its composition no longer exhibits any discernible propensity to change further. The equilibrium constant of a chemical reaction is the value of its reaction quotient at chemical equilibrium.
The maximum number of moles of a solute that can be dissolved in a liter of solution before the solution becomes saturated is its molar solubility. Because of the relationship between the molar solubility and the solubility product, one can use the other to determine the other.
Ksp = S^2
2.00 ×10^-3 = S^2
S = √(2.00 × )
S = 0.0447 mol/L
To learn more about Molar Solubility use
brainly.com/question/28202068
#SPJ1
Explain how a raccoon is helping the environment when it eats the fruit of a plant.
a
The raccoon is getting energy from the fruit.
b
The raccoon is helping to spread the seeds of the plant.
c
The raccoon is cleaning up fruit that would pollute the ground.
d
The raccoon is preventing the reproduction of the plant by eating the fruit.
choice b is the right response. When the raccoon consumes the fruit, it aids in the dispersal of the plant's seeds.
The seeds that the raccoon consumes along with the fruit move through its digestive tract and are eventually eliminated in the raccoon's feces.
When the feces are left behind, they can act as a source of nutrition for the seeds, promoting their growth and allowing new plants to take root. The plant's chances of reproducing and sustaining a healthy population are increased thanks to the raccoon's assistance in dispersing the seeds.
A raccoon consumes both the fruit's seeds and the fruit itself when it consumes a plant's fruit. The seeds are subsequently digested by the raccoon, which is beneficial for the seeds since it breaks down the tough seed coatings and supplies nutrients that aid in the growth of the seed. The raccoon finally excretes the seeds in its feces, which are then dumped in other parts of the habitat.
Plants need this mechanism of seed dispersal because it promotes genetic variation and can result in the formation of new plant populations in various locations.
learn more about raccoon here
https://brainly.com/question/24580950
#SPJ1
1c. A car drives 464 km in 4 hours. What is its average speed in kilometers per hour? Please SHOW YOUR WORK and INCLUDE UNITS!
Looking for km/hr
The car's average speed is 116 kilometers per hour.
The entire distance traveled divided by the total time elapsed is the definition of average speed. It is typically stated in terms of the amount of time or distance per unit, such as meters per second (m/s) or kilometers per hour (km/hr).
Average speed = total distance ÷ total time
In this case, the total distance is 464 km and the total time is 4 hours.
Average speed = 464 km ÷ 4 hours
Average speed = 116 km/hr
Therefore, the car's average speed is 116 kilometers per hour.
learn more about average speed here
https://brainly.com/question/4931057
#SPJ1
An unidentified compound was analyzed and found to contain 29.84 g Na, 67.49 g Cr and 72.67
g of O. Calculate the empirical formula of the compound.
Sodium dichromate is the empirical formula for the chemical.
Benzene formula: what is it?An allotrope of carbon with the chemical formula carbon 6, benzotriyne or cyclo[6]carbon is a hypothetical molecule. Six carbon atoms form the molecule's ring, which is joined by alternating triple and single bonds.
We must identify the compound's simplest whole-number atom ratio in order to obtain the empirical formula. To begin, we can convert the masses of each element to moles as follows:
moles of sodium = 29.84 g / 22.99 g/mol = 1.299 mol
moles of creatinine = 67.49 g / 52.00 g/mol = 1.298 mol
moles of oxygen = 72.67 g / 16.00 g/mol = 4.542 mol
sodium.creatinine.oxygen = 1.299 mol / 1.298 mol : 1.298 mol / 1.298 mol : 4.542 mol / 1.298 mol
sodium.creatinine.oxygen = 1.001 : 1.001 : 3.500
sodium.creatinine.oxygen = 1001 : 1001 : 3500
sodium.creatinine.oxygen = 1001/GCF : 1001/GCF : 3500/GCF
sodium.creatinine.oxygen = 143 : 143 : 500.
To know more about Sodium visit:-
https://brainly.com/question/29327783
#SPJ1
Determine the quantity in grams of CO(NH2) that are in 0.57 moles of CO(NH»).
0.95 g
Answer: 34.24 g
Explanation: The molar mass of CO(NH2) can be calculated by including up the nuclear masses of each component within the atom. The nuclear masses of carbon (C), oxygen (O), nitrogen (N), and hydrogen (H) are 12.01 g/mol, 16.00 g/mol, 14.01 g/mol, and 1.01 g/mol, individually.
Molar mass of CO(NH2) = 1 x molar mass of C + 1 x molar mass of O + 2 x molar mass of N + 4 x molar mass of H
Molar mass of CO(NH2) = 1 x 12.01 g/mol + 1 x 16.00 g/mol + 2 x 14.01 g/mol + 4 x 1.01 g/mol
Molar mass of CO(NH2) = 60.06 g/mol
Presently, we will utilize this molar mass to change over moles of CO(NH2) to grams of CO(NH2):
mass of CO(NH2) = number of moles x molar mass
mass of CO(NH2) = 0.57 mol x 60.06 g/mol
mass of CO(NH2) = 34.24 g
Hence, there are 34.24 grams of CO(NH2) in 0.57 moles of CO(NH2). The answer isn't among the choices, so we have to be calculate the proper reply.
To discover the proper reply, ready to utilize the relationship between moles and mass:
mass = moles x molar mass
mass = 0.57 moles x 60.06 g/mol = 34.24 g
GaAsO4 what is the ionic compound name
The ionic compound name of GaAsO4 is gallium arsenate.
Is gallium arsenate covalent or ionic?By moving three electrons from gallium to arsenic, gallium arsenide (GaAs) might be created as an insulator, however this does not happen. Gallium arsenide is a covalent semiconductor, hence the bonding is more strong sphalerite crystals in this shape are referred to as zinc blende or cubic sphalerite.
Any substance contains ions?Examples of ionic compounds include salts, oxides, hydroxides, sulphides, and the bulk of inorganic substances.. The electrostatic interaction between the positive and negative ions holds ionic solids together. As an illustration, sodium ions draw chloride ions, and chloride ions draw sodium ions.
To know more about ionic compound visit:-
https://brainly.com/question/3222171
#SPJ1
What is the pH of a solution that has a hydronium concentration of 4.8 x 10-12
The pH of a solution that has a hydronium concentration of 4.8 x 10⁻¹² is 11.32.
What is pH?The term "potential of hydrogen" (sometimes known as "power of hydrogen") has historically been used to describe this property in chemistry. It is a scale used to describe how basic or how acidic an aqueous solution is. Lower pH values are recorded for acidic solutions (solutions with higher H+ ion concentrations) than for basic or alkaline solutions.The set of standard solutions whose pH has been defined by international agreement can be used to trace the pH scale.[4] Using a concentration cell with transference, the potential difference between a hydrogen electrode and a standard electrode, such as the silver chloride electrode, is measured to get the primary pH standard values. With the use of a glass electrode, a pH meter, or a color-changing indicator, the pH of aqueous solutions can be determined.
The pH of a solution is the negative log of its hydronium ion concentration. To calculate the pH of a solution, we can use the following equation:
pH = -log[H⁺]
Therefore, the pH of a solution with a hydronium ion concentration of 4.8 x 10⁻¹² is -log(4.8 x 10⁻¹²) = 11.32.
To know more about pH meter, visit:
https://brainly.com/question/16017791
#SPJ1
Using the following equation:
4NH3 +502 --> 4NO + 6H₂O
How many grams of oxygen gas (0₂) are needed to react with 85 grams of ammonia
(NH3)?
Answer: 199.68 grams of oxygen gas (O2) are needed to react with 85 grams of ammonia (NH3).
Explanation: The equilibrium chemical equation is as follows:
The chemical equation expressed as 4NH3 + 5O2 → 4NO + 6H2O is a representation of a chemical reaction that describes the reaction between four molecules of ammonia and five molecules of oxygen to yield four molecules of nitrogen monoxide and six molecules of water.
The stoichiometric analysis indicates that the reaction between oxygen and ammonia necessitates five moles of the former to react with four moles of the latter.
The present ratio can be employed for the computation of the requisite quantity of O2 necessary for the reaction with 85 grams of NH3, in the ensuing manner:
Determine the quantity of moles of NH3.
The molar mass of ammonia (NH3) can be calculated by adding the atomic masses of its constituent elements. The atomic mass of nitrogen (N) is 14.01 g/mol, and the atomic mass of hydrogen (H) is 1.01 g/mol. Therefore, the molar mass of NH3 is determined by adding the atomic mass of N to three times the atomic mass of H. Mathematically, the molar mass of NH3 is expressed as 14.01 g/mol + 3(1.01 g/mol), which yields a value of 17.04 g/mol.
The quantity of NH3 in moles can be determined by dividing the mass of NH3 by its corresponding molar mass, according to the fundamental principle of stoichiometry.
The number of moles of NH3 can be determined as 85 grams divided by the molar mass of NH3, which is 17.04 grams per mole.
The calculated value of the quantity represented by "moles of NH3" has been determined to be 4.99 mol, with insignificance beyond two decimal places due to rounding.
Determine the quantity of moles of O2 necessary.
The number of moles of O2 present is equivalent to five-fourths of the moles of NH3.
The amount of oxygen, represented by the unit of moles, can be mathematically expressed as (5/4) multiplied by 4.99 mol.
The quantity of oxygen, expressed in terms of moles, corresponds to 6.24 mol.
The conversion of moles of O2 to grams can be made by utilizing the molar mass of O2, which is 32 g/mol. This entails multiplying the given number of moles by the molar mass in order to obtain the corresponding mass in grams.
The molar mass of O2 was determined to be 32.00 g/mol, which was derived by multiplying 2 with the molar mass of oxygen, 16.00 g/mol.
The computation of the mass of O2 is achieved by multiplying the number of moles of O2 by the molar mass of O2.
The expression denoting the quantity of molecular oxygen, where mass is represented as a product of 6.24 moles and a molecular weight of 32.00 grams per mole, can be expressed in a manner consistent with academic writing.
The mass of O2 is 199.68 g.
Methamphetamine is a notorious street drug. One synthesis involves reductive amination of benzyl methyl ketone with methylamine. Indicate the reactions and give the structure of methamphetamine
Methamphetamine is an amphetamine that stimulates the central nervous system (CNS).
Methamphetamine works by facilitating the release of catecholamines from brain nerve terminals, including noradrenaline, dopamine, and serotonin, as well as by inhibiting their uptake. As a result, the concentration of these neurotransmitters in the synaptic cleft rises, stimulating postsynaptic receptors more intensely.
The catalytic reduction of 1-phenyl-2-propanone (P-2-P, benzyl methyl ketone, BMK, or phenylacetone) in the presence of ammonia or methylamine is the fundamental reaction in all processes used to create methamphetamine. The Leuckart method (non-metallic reduction) and catalytic metal reduction are currently the most widely used reduction techniques.
To learn more about methamphetamine, click:
https://brainly.com/question/14971946
#SPJ1
What is the mass of a 0.230 mole sample of potassium metal?
Answer:
Explanation:
0.25 moles KCl = 19g KCl (molar mass KCl = 74.6g)
Which enthalpy of the reaction of the following equations is the same as the enthalpy of formation?
Ni (s) + ½ O, (g) -> NiO (s)
CO (g) + ½ O2 (g) -> CO2 (g)
.
KOH (s) -> K+ (ag) + OH (ag)
2 H (g) + Se (s) -> HaSe (g)
2 Fe (s) + 3 Cla (g) -> 2 FeCl, (s)
Enthalpy of the reaction of the following equation is the same as the enthalpy of formation. 2 Fe (s) + 3 Cla (g) → 2 FeCl (s).
What is Enthalpy of the reaction?The difference between total reactant and total product molar enthalpies, computed for substances in their standard states, is the standard enthalpy of reaction for a chemical reaction. As long as the enthalpy of mixing is taken into consideration as well, this can then be used to forecast the total chemical bond energy liberated or bound during reaction.
A reaction's standard enthalpy is defined so that it solely depends on the conditions that are prescribed for it, rather than just on the actual circumstances in which reactions take place. The two main circumstances in which thermochemical measurements are actually performed.
What is enthalpy of formation?The change in enthalpy during the synthesis of 1 mole of a compound from its component elements in their reference state, with all substances in their standard states, is known as the standard enthalpy of formation or standard heat of formation of a compound. The IUPAC recommends using the standard pressure value of 105 Pa (100 kPa = 1 bar), while previous to 1982, the value of 1 atm (101.325 kPa) was used.
To know more about bond energy, visit:
https://brainly.com/question/26141360
#SPJ1
A 1.000 g sample of an unknown compound containing only carbon, hydrogen, and oxygen was analyzed
through combustion analysis and yielded 2.224 g of CO, and 0.3035 g of H,O. What is the compound's
empirical formula?
The moles of carbon, hydrogen, and oxygen may not be whole numbers, we may need to round them to the nearest whole number to get the simplest ratio.
What is Empirical Formula?
The empirical formula of a chemical compound represents the simplest, most reduced ratio of atoms in that compound. It shows the relative number of atoms of each element present in the compound, expressed as the smallest whole numbers. In other words, it gives the simplest whole number ratio of the elements in a compound.
Mass of carbon = moles of CO
Mass of hydrogen = 2 x moles of H2O (since each H2O molecule has 2 hydrogen atoms)
Calculate the moles of oxygen in the compound.
Given:
Mass of oxygen = moles of CO (since each CO molecule has 1 oxygen atom) + moles of H2O (since each H2O molecule has 1 oxygen atom)
Determine the empirical formula.
The empirical formula represents the simplest, most reduced ratio of atoms in the compound. To determine it, we can use the mole ratios of carbon, hydrogen, and oxygen calculated in the previous steps.
Empirical formula = CxHyOz, where x, y, and z represent the mole ratios of carbon, hydrogen, and oxygen, respectively.
Now, let's plug in the calculated values for moles of carbon, hydrogen, and oxygen into the empirical formula:
Empirical formula = C moles : H moles : O moles
Learn more about Empirical Formula from the given link
https://brainly.com/question/1603500
#SPJ1
The empirical formula of the unknown compound given the combustion analysis data is C2H3O.
Explanation:The first step in solving this problem is to know how much carbon and hydrogen in grams are in the carbon dioxide (CO2) and water (H2O) produced. From the mass of CO2, we get 2.224g * 0.2729 (proportion of carbon in CO2) = 0.607g C. And the mass of hydrogen is 0.3035 g * 0.1119 (proportion of hydrogen in H2O) = 0.034g H. The remaining mass is 1g (total mass) - 0.607g C - 0.034g H = 0.359g O. Then, we need to convert these values to moles. This gives us 0.607g C * (1 mole C / 12.01 g C) = 0.050 moles C, 0.034g H * (1 mole H / 1.01 g H) = 0.033 moles H, and 0.359g O * (1 mole O / 16.00 g O) = 0.022 moles O.
By finding the ratio of these moles, we get C2H3O, which is the empirical formula of the compound.
Learn more about Empirical Formula here:https://brainly.com/question/32125056
#SPJ2
A toy balloon has an internal pressure of 1.05 atm and a volume of 5.0 L. If the temperature where the balloon is released is 250 C, what will happen to the volume when the balloon rises to an altitude where the pressure is 0.65 atm and the temperature is –150 C?
The combined gas law, which links a gas's pressure, volume, and temperature, can be used to solve this issue. When the balloon reaches an altitude with a pressure of 0.65 atm and a temperature of -150 C, its capacity will fall to 4.9 L.
What's the current temperature?The Centigrade scale, Celsius size, and Kelvin scale are the three scales that are most frequently used to measure temperature.Any item contains molecules that move or vibrate. Its temperature will rise when it is heated because the molecules are moving more quickly.A tool called a thermometer is used to measure it. the three units used to measure temperature.
To know more about temperature visit :
https://brainly.com/question/11464844
#SPJ1