Proper guarding, lockout/tagout, and electrical box covers are all verified during an electrical safety inspection.
An electrical safety inspection is a critical process that is carried out to ensure that electrical equipment, systems, and facilities are safe to use and operate. The inspection includes a thorough examination of all electrical components, including wiring, panels, circuit breakers, outlets, and switches.
Proper guarding is essential to protect workers from electrical hazards such as shocks and burns. The inspection will verify that all electrical equipment is properly guarded, and that there are no exposed live parts that could cause injury.
Lockout/tagout procedures are used to ensure that equipment is not energized while maintenance or repair work is being carried out. The inspection will verify that these procedures are being followed correctly, and that all equipment is locked out and tagged as required.
To learn more about Proper guarding , click here:
https://brainly.com/question/15868666
#SPJ4
which storage device uses aluminum platters for storing data?
A hard disk drive (HDD) uses aluminum platters for storing data. HDDs are composed of one or more rigid disks, or platters, which are coated with a magnetic material. The platters are made of aluminum, glass, ceramic, or a combination of these.
What is Hard Disk ?A hard disk is a storage device used to store digital data. It is composed of one or more spinning platters that use magnetic media to record digital data on the surface. The hard drive is connected to the computer using an interface such as SATA or ATA, and is powered by an internal motor which spins the platters.
The data is written and read using an arm that moves across the platters as they spin, allowing data to be read and written at different locations. Hard disks are the most common type of storage device used in modern computers and are used to store programs, applications, and user data. They offer fast data access and high capacity storage, making them a popular choice for storing large amounts of data.
To learn more about Hard Disk
https://brainly.com/question/28493309
#SPJ4
when the eudiometer tube is inverted why does the acid flow downward, it is called?
Gas (hydrogen) will replace the water in the eudiometer as it is created. Using "downward displacement" is what is meant by this.
Due to the acid's greater density than the water, it dips below the water. It pours down the tube spontaneously when it is turned upside down.
Today, chemistry uses eudiometers to measure the amount of oxygen in the air. An electric spark causes atmospheric air and hydrogen to erupt over water, and the rise in the water's level in the tube indicates the presence of oxygen.
Tour operators traveled with eudiometers throughout Europe searching for the ideal locations for health resorts. As a result of rotting garbage, human waste, and stagnant water, it was believed that disease was brought on by poor air quality and offensive odors.
In order to treat and prevent illness, clean air was therefore regarded as crucial—a picture of the eudiometer and a different instrument with a comparable design.
To know more about eudiometers:
brainly.com/question/30367290
#SPJ4
the part of a melting-alloy overload that responds to an overload current is known as the?
The melting alloy element is the portion of a melting-alloy overload that reacts to an overload current.
The set of normally closed contacts were opened as a result of the heat source's acceleration of the expansion of the grey-shaded metal (the piece on the bottom) relative to the blue-shaded metal (the piece on top), which caused the current to the motor to stop flowing.
The solder melting pot is made up of a heater element, solder pot assembly, ratchet wheel, and a set of normally closed contacts. The ratchet wheel maintains the tension of a spring. The set of typically closed contacts will become open if the wheel is allowed to spin due to the spring's upward force. The solder in the solder pot holds the wheel in place.
Learn more about melting here:
https://brainly.com/question/15873508
#SPJ4
How can I find a solution for Sustainable Engineering Field, Informally?
The best way to find a solution for Sustainable Engineering Field, Informally is to do research and connect with people in the industry.
What is Engineering ?Engineering is the application of scientific, economic, social, and practical knowledge to invent, design, build, maintain, research, and improve structures, machines, tools, materials, and technologies. It is a broad field of study that involves the application of mathematics, physics, chemistry, biology, and other disciplines to solve problems and create products.
Start by researching the field and reading up on the current challenges and opportunities. From here, you can reach out to industry professionals and start asking questions. Through this process, you can gain insight into the field and start to develop a strategy for finding a sustainable engineering solution.
To learn more about Engineering
https://brainly.com/question/28321052
#SPJ4
You are to dim your headlights at a minimum distance of ____ when following another vehicle. A.) 100 feet.B.) 300 feet. C.) 750 feet. D.) 1,000 feet.
B) You are to dim your headlights at a minimum distance of 300 feet when following another vehicle.
You can find yourself operating a vehicle in a construction zone, on an unfamiliar road, or on a dark downtown street. Realizing that you can't see the road ahead is unsettling. Slow down if your vision is blurry. Turn on your high lights if there are no other vehicles in the area. The pedestrians and cyclists who may be crossing in front of you or walking along the side of the road will also be safe thanks to your high lights. State law normally mandates that you lower your high lights in metropolitan areas when approaching cars are within 300 to 1000 feet. Also, you must dim them when you are 200 to 300 feet or less from a vehicle you are following, particularly at stop signs and traffic lights.
To know more about vehicle:
https://brainly.com/question/24745369
#SPJ4
an electric current is defined as the flow of ? through a conductor.
Electron flux in a conductor is just what creates electric current. Voltage is the phrase used to describe the force necessary to enable current to flow through a conductor, while potential is another name for voltage.
What is a GCSE in electrical current?The pace of passage of electrical current is determined by the magnitude of the current. Electrons transport electrical charge. A source for potential difference (such as a battery or a cell) is required for electrical charge to pass through a circuit.
How does electricity move?When electrons go from negative to positive, current moves from positive to negative. The quantity of electrons that flow across a conductor's cross section in a second defines current.
To know more about Electric current visit:
https://brainly.com/question/1838706
#SPJ4
A particle P is moving in the plane around a curve defined in polar coordinates by r(theta) = (3 + sin(5*theta + 2) m. At the instant shown, the angular position, velocity, and acceleration of P are theta = 4 rad, omega = -1 rad/s, and alpha = 3 rad/s^2. What is the acceleration of vector a of P?a= ______i + _________ j m/s^2
Every procedure where the velocity varies is referred to as acceleration. There are only two ways to accelerate: changing your speed or changing your direction, or changing both.
What is velocity?The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.
In kinematics, the area of classical mechanics that deals with the motion of bodies, velocity is a fundamental idea.
A physical vector quantity called velocity must have both a magnitude and a direction in order to be defined.
Speed is a coherent derived unit whose quantity is expressed in terms of meters per second in the SI. It is the scalar absolute value of velocity.
The definition of velocity is the rate at which a position changes with regard to time; this concept is also known as the instantaneous velocity.
Learn more about velocity, here
https://brainly.com/question/17127206
#SPJ1
the unibody design was first used in _________ and then spread to automobiles.
The unibody design was first used in Aircraft and then spread to automobiles.
What is automobiles?Automobiles are motorized vehicles that are used for transportation. They are powered by an internal combustion engine, electric motor, or other type of engine, and have four wheels. Automobiles have become a vital part of modern life, providing a convenient, comfortable, and affordable way to travel. Automobiles are used for commuting, business, recreation, and other transportation needs. Automobiles come in a variety of sizes, shapes, and styles, from small hatchbacks to large luxury sedans. Automobile designs have become more efficient and environmentally friendly, with hybrid, electric, and fuel-cell vehicles becoming available.
To learn more about automobiles
https://brainly.com/question/30155533
#SPJ1
remove elements 2, 4, and 6 from row array pendingtasks.
We have created a new array by iterating over the elements in the original array using a list comprehension. We include only those elements whose index (i) is not equal to 2, 4, or 6. Finally, we replace the original array with the new array.
What is array?
Assuming that "row array" means a one-dimensional array, and "pendingtasks" is the name of the array.
Here's an example in Python that removes the elements 2, 4, and 6 from the array:
pendingtasks = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
# Use list comprehension to create a new array without elements 2, 4,
# and 6
pendingtasks = [x for i, x in enumerate(pendingtasks) if i not in [2, 4, 6]]
print(pendingtasks)
A list comprehension is used to iterate over each element in pendingtasks, along with its index.
The expression x for i, x means that we want to include the element x in the new array, and i is the index of that element. The if i not in [2, 4, 6] part filters out any elements whose index is 2, 4, or 6.
To know more about one-dimensional array, visit: https://brainly.com/question/29890680
#SPJ1
what does Ohm law teach about current and resistance
Answer:
Directly proportional to voltage but inversely proportional to resistance
Explanation:
The law mentions that current is directly proportional to voltage but inversely proportional to resistance. At constant resistance, current increases as voltage increases and vice versa. At a constant voltage, the current decreases as resistance increases and vice versa.
Answer:
Ohm's Law states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them. Mathematically, this can be expressed as:
I = V/R
Where:
I is the current flowing through the conductor in amperes (A)
V is the voltage across the two points in volts (V)
R is the resistance between the two points in ohms (Ω)
This equation shows that if the voltage (V) is increased while the resistance (R) stays constant, the current (I) will also increase. Conversely, if the resistance (R) is increased while the voltage (V) stays constant, the current (I) will decrease.
This relationship is fundamental to the behavior of electric circuits, and is used extensively in circuit analysis and design.
what will be the output of the following program? my_list = [1, 2, 3, 4] num = 5 for index in range(len(my_list)): my_list.append(num index) print (my_list)
The result of the next programme is [1, 2, 3, 4, 5, 6, 7, 8].
Who defines the four data structures?In general, there are four types of data structures to consider: arrays and lists are linear. Tree: binary, heaps, space partitioning, etc. Hashing: distributed hash table, hash tree, etc.
Data structures: What do they do?In order to organize, process, retrieve, and store data, a data structure is a specific format. Data structures come in a variety of basic and sophisticated forms and are all made to organise data in a way that is appropriate for a certain function. Users can quickly access and use the data they require in the right ways thanks to data structures.
To know more about program visit:-
https://brainly.com/question/11023419
#SPJ4
Two 6.0 cm x 6.0 cm metal electrodes are spaced 1.0 mm apart and connected by wires to the terminals of a 9.0 V battery. What is the charge on each electrode?
The electrode from which electrons are taken acquires a positive charge, whereas the electrode from which they are supplied acquires a negative charge and an excess of electrons.
decreasing agent The electrode at which reduction takes place in any electrochemical cell (electrolytic or galvanic) is referred to as the cathode. The positive electrode, on the other hand, will draw anions, or negative ions, to it. As a result of its ability to take electrons from those negative ions or other species in the solution, this electrode acts as an oxidizing agent. The anode is the electrode in any electrochemical cell where oxidation takes place. The fact that anode, oxidation, and reduction all start with vowels whereas cathode, reduction, and other electrodes do not, makes it simple to remember which electrode is which.
Learn more about electrode here:
https://brainly.com/question/17060277
#SPJ4
the sheet and bulk icons at the top of page 120 are to help you understand what about sand casting?
There is a single main entry place for the metal to get into the mould known as the sprue when numerous pares are created at once in sand casting, die casting, investment casting, or centrifugal casting.
Which gating technique allows molten metal to enter the mould cavity as a result of the negative effects of gravity?Sprue: The channel via which molten metal travels from the pouring basin to the cavity of the mould. It frequently regulates the flow of metal into the mould.
Which of the following involves pouring a molten substance into a mould cavity before removing the mould?In both procedures, the metal is melted in a crucible, poured into a mould, and then the casting is removed after the metal has cooled and set.
to know more about casting here:
brainly.com/question/1253405
#SPJ4
Why can streamlines be treated as material boundaries when they form the walls of a stream tube?
The streamlines that make up stream tube walls prevent flow from crossing them since all of the velocity vectors are perpendicular to them.
What distinguishes a streamline from a stream tube?A streamline is a line drawn in a fluid whose tangent at each point is parallel to the local fluid velocity. The instantaneous flow pattern is made up of the total number of streamlines at any particular time. A stream tube is made up of the streamlines that are drawn through each point on a closed curve.
At solid walls, what boundary condition is typically used?No slip boundary conditions, in which the fluid sticks to the stationary wall and maintains zero velocity in relation to the solid wall, are typical wall boundary conditions. Hence, it implies that there are no viscous effects at the wall and hence, no boundary layer develops.
To know more about streamline visit:-
brainly.com/question/13087817
#SPJ4
an inverting amplifier with nominal gain of -50 v/v employs an op amp having a dc gain of 104 and a unity-gain frequency of 106 hz. what is the 3-db frequency f3db of the closed-loop amplifier? what is its gain at 0.1f3db and at 10f3db
The closed loop amplifier's frequency is 19.608 kHz, and the inverting amplifier's nominal gain is 50.
How is gain calculated when an op-amp is inverted?Gain = Rin/R Consequently, R = Gain x Rin. 40 times 10,000 equals 400,000 or 400K, or R. The circuit would need the following new resistor values to have a gain of 40: R is 400K, while Rin is 10K. The formula might potentially be changed to get a new value for Rin while maintaining the original value for R.
What is the inverting amplifier formula?The output of the inverting op amp is Vout=-IR2=-VinR2/R1 because the inverting input is at virtual ground. As a result, the inverting op amp circuit's gain is R2/R1. Because the gain is negative, the output is out of phase with the input.
To know more about amplifier's visit:-
https://brainly.com/question/16795254
#SPJ1
what type of engineer designs and builds planes and space vehicles?
Aerospace Engineers design and build planes, spacecraft, satellites, and missiles. They develop new technologies for use in aviation, defense systems, and spacecraft.
What is satellites?A satellite is an object in space that orbits or circles around a larger object. It is usually a man-made object that is sent into space for communication, weather forecasting, navigation, and other uses. Satellites can also be used as a tool for exploration and observation. For example, a satellite might be used to take photos of the Earth's surface or to track the movement of storms and other weather phenomena.
They often specialize in areas such as aerodynamics, thermodynamics, celestial mechanics, propulsion, acoustics, and guidance systems.
To learn more about satellites
https://brainly.com/question/14156927
#SPJ4
FILL IN THE BLANK. ____is the order in which waveforms from each phase (A,B, and C) cross zero. (Current crest rotation; Harmonic sequence; Phasor rotation ; Harmonic degree)
Phasor rotation is the order in which waveforms from each phase (A, B, and C) cross zero.
In a three-phase electrical system, the voltage and current waveforms of each phase are offset by a specific angle from each other. This angle is called the phase angle, and it determines the relationship between the waveforms. The phasor rotation is the order in which the voltage or current waveforms from each phase (A, B, and C) cross the zero axis, which is also known as the reference or neutral line.
In a three-phase electrical system, the waveform of each phase completes one full cycle (360 degrees or 2π radians) within a given time period. The phasor rotation refers to the order in which each waveform completes this cycle, starting from the point where it crosses the zero axis.
For example, in a three-phase system, the voltage waveforms for each phase (A, B, and C) may be offset by 120 degrees from each other. This means that each waveform crosses the zero axis at a different time relative to the other waveforms. The phasor rotation refers to the order in which these waveforms cross the zero axis, as they complete one full cycle.
To learn more about waveforms, click here:
https://brainly.com/question/30054547
#SPJ4
Which instrument should be used to verify that there is power available to run a three-phase motor that will not start?
voltage meter A piece of electrical test equipment called a test light, test lamp, voltage tester, or mains tester is used to find out if an item of equipment is powered by electricity.
To check for the presence of voltage on a conductor, a test light frequently suffices because it is less complicated and expensive than a measurement device like a multimeter. Test lights that have been properly built have safeguards to prevent electric shock to the user. Voltage may be found on insulated conductors using non-contact test lamps. One or two insulated wire leads link an electric lamp used as a test light to the battery. [1] Most frequently, it looks like a screwdriver with a lamp attached to the tip and a single lead that projects.
Learn more about equipment here:
https://brainly.com/question/30230359
#SPJ4
to crank an engine at 200 rpm, how fast must an average starter motor turn?
The typical starting motor turns at 3600 RPM to power an engine at 200 RPM.
What are different kinds of motor?We are aware that AC motors and DC motors are the two main kinds of motors. AC motors have variable speed capabilities and require little electricity to initiate. On the contrary end, DC motors are frequently used because they can be installed quickly and have lower starting costs for low power units than AC.
What do engineers mean by an electric motor?Electric motors are a type of machinery that use electromagnetic processes to transform electrical energy into mechanical energy.
To know more about Motor visit:
https://brainly.com/question/14782056
#SPJ4
a bathroom vanity lighting fixture will draw ___ amps when connected to a 120-volt branch circuit. the fixture has twenty-four lamps installed. each lamp has a rating of 40 watts at 120 volts.
Note that the bathroom vanity lighting fixture will draw 8 amps when connected to a 120-volt branch circuit.
What is the rationale for the above response?To calculate the amperage drawn by the bathroom vanity lighting fixture, we first need to calculate the total power consumed by the lamps:
Total power = number of lamps * power per lamp
Total power = 24 * 40 watts
Total power = 960 watts
Now, we can calculate the amperage drawn using Ohm's Law:
Amperage = Power / Voltage
Amperage = 960 watts / 120 volts
Amperage = 8 amps
Therefore, the bathroom vanity lighting fixture will draw 8 amps when connected to a 120-volt branch circuit.
Learn more about branch circuit. at:
https://brainly.com/question/30612455
#SPJ1
Pacemakers designed for long-term use commonly employ lithium-iodine batteries that are capable of supplying 0.42 A⋅h of charge.
a. How many coulombs of charge can such a battery supply?
b. If the typical current produced by the pacemaker is 5.6 μA, what is the expected lifetime of the device?
The movement of electrons is current. This battery will be capable of delivering 1,512 C of charge.
The flow of electron-deficient atoms, or electrons, is what is known as current. I is used to symbolise it. Moreover, one column of electrical charge is equal to one ampere, the SI unit of current.
Current, I₀ = 0.42A⋅h
current that the pacemaker generates , I₁ = 5.6μA = 5.6 x 10⁻⁶ A
A.) The relation, which may be used to calculate the number of coulombs the battery can produce,
Q= I x T
Q = 0.42 x 3600
Q = 1,512 C
Hence, this battery will be able to deliver 1,512 C of charge.
B.) As the charge was previously discussed using the same relationship,
Q= I xT
When we are aware of the current and charge the battery and pacemaker create,
1512 = 5.6 x [tex]10^{-6}[/tex] x t
t = 2.7 x [tex]10^{-4}[/tex] sec
As a result, the device should last 2.7 x [tex]10^{-4}[/tex] sec.
To know more about Current:
brainly.com/question/2285102
#SPJ4
what are some likely applications for remote sensing?
Bedrock, lithological, and structural imaging are just a few of the remotely sensed uses in geology.
What GIS uses exist for remote sensing?One of the ways commonly used to get physical data for GIS integration is remote sensing. Without making direct contact, remote sensors gather information from earthly objects. These devices, that are normally installed on satellites or aircraft, accomplish this by sensing radiation reflected from the earth.
Which five application of remote sensing?assessing the state of rural roads making a required to complete from scratch.measuring the snow.gathering images of the globe from space putting out wildfires.identifying land use pattern and use calculating the quantity of forests.finding building and structural changes.To know more about remote sensing visit:
https://brainly.com/question/3963878
#SPJ4
To defog the rear window of an automobile, a very thin transparent heating element is attached to the inner surface of the window. A unform heat flux of 1300 W/m^2 is provided to the heating element for defogging the rear window of thickness 5 mm. The interior temperature of the automobile is 22 C and the convection heat transfer coefficient is 15 W/m^2K. The outside ambient temperature is -5 C and the convection heat transfer coefficient is 100 W/m^2K. If the thermal conductivity of the window is 1.2 W/mK, determine the inner surface temperature of the window.
The inner surface temperature of the window is equal to -5 + 0.5417/A.
What is temperature?Temperature is a measure of the average kinetic energy of all the atoms and molecules in a system. It is a physical property of matter that can be observed and measured. Temperature can be measured in various ways, from the feeling of hot or cold on the skin to more precise scientific instruments. Heat is a form of energy and temperature is a measure of this energy.
The inner surface temperature of the window can be calculated using the equation:
Q = kA(T1-T2)/L
Where Q is the heat flux, k is the thermal conductivity, A is the area of the window, T1 is the inner surface temperature, T2 is the outer surface temperature, and L is the thickness of the window.
Rearranging the equation gives us:
T1 = T2 + (QL)/(kA)
Substituting the given values, we get:
T1 = -5 + (1300*0.005)/(1.2*A)
T1 = -5 + 0.5417/A
Therefore, the inner surface temperature of the window is equal to -5 + 0.5417/A.
To learn more about temperature
https://brainly.com/question/18042390
#SPJ1
always leave extra space in front of you when
Always leave extra space in front of you when driving, especially in situations where you may need to make sudden stops or take evasive action.
The importance of leaving extra space in front of your vehicle stems from the fact that doing so gives you more time to react to unforeseen events on the road, such as a sudden stop by the vehicle in front of you, an impediment in the road, or a person crossing the street. This extra space also acts as a cushion of safety in case you have to swerve or stop quickly to avoid a collision.
How much extra space you should leave in front of your car depends on many factors, including your speed, the condition of the road, the weather, and the volume of traffic. It is frequently recommended to keep a two-second following distance or greater in good conditions. This means that you must follow the vehicle in front of you by at least two seconds, counting the time it takes for the vehicle to pass a set position and ensuring sure that you do not pass the same area before the vehicle does so.
To learn more about extra space
brainly.com/question/14319040
#SPJ4
The complete question is:
Fill in the blanks,
Always leave extra space in front of you when ______________.
Is red positive or negative DC?
In general, positive voltage is represented by red wires, whereas negative voltage is represented by black wires. Yet this is not the case.
Is red positive or negative DC?There will normally be two or three shielded wires when wiring for DC power. The coloring looks like this: The red current must be positive. It must be black for the negative current.
Is red cable positive or negative?Positive and negative cables are also included in the jumper cable set. The red one is positive (+), while the black one is negative (-). (-). Never connect the red cable to the negative battery terminal or a dead battery in a car.
To know more about positive or negative DC visit:-
https://brainly.com/question/15379637
SPJ4
the following loop is syntactically valid. for (int j = 0; j < 1000; j ) j--; (T/F)
True, This loop activates j to 0 then evaluates it to 1000 without changing j for the course of the loop. In fact, once I grows too big to fit in memory, the loop will finally end with an operated error.
What three types of loops are all there?Loops are necessity to understand that repeat a specific chunk of code until a certain condition is satisfied or a specified number of times. There seem to be three main forms of loops in Visual Basic.
What does a program loop mean?A loop is a set of instructions which are repeatedly carried out until a specific condition is met in computer coding. Usually, a specific method is carried out, such as obtaining and altering a data set.
To know more about loop visit:
https://brainly.com/question/13868539
#SPJ4
What kind of statement allows us to run one block of code if one condition is true, and a separate block of code otherwise?
A. if statement
B. break statement
C. if/else statement
D. for loop
The true and false parts of a given condition are both executed using the if-else expression. If the condition is true, the code in the if block is performed; if it is false, the code in the else block is executed.
The term "executed" means what exactly?
As a kind of punishment, one may be executed: He was put to death for killing. Following two weeks, she was put to death and executed. Yesterday, a killer with a death sentence was executed in North Carolina.
Execute has a number of popular synonyms, including attain, effectuate, discharge, and perform. Despite the fact that all of these phrases indicate "to carry out or into effect," the term "execute" emphasises doing what is intended or in the plan.
Know more about discharge Visit:
https://brainly.com/question/29571800
#SPJ4
What is the requirement for structural firefighting boots?
a. Pull-on design
b. Rubber upper
c. Zipper closure
d. Slip-resistant sole
Structural firefighting boots are required because they have slip-resistant soles.
Firefighters' personal protective equipment (PPE) is known as bunker gear. The names come from the fact that the firefighter's bunk at the fire station is typically where the boots and pants are kept so they are always available for use. The uniform that a firefighter wears at the station is the first piece of firefighting gear. Its objective is to give firefighters comfortable apparel that won't get in the way when they have to put on their turnout gear. Whenever time a firefighter is dispatched, turnout gear must be worn over station attire. The station safety shoes, often known as work boots, are another component of the costume. In most nations, these shoes must be equipped with safety toes and puncture-resistant bottoms in case a fireman responds to a call without the need for turnout gear.
Know more about Firefighter equipment here:
https://brainly.com/question/30360103
#SPJ4
project managers and teams should consider risks and include them in the project charter for all the following reasons except:
Prior to the project charter being signed, all project risks should be eliminated.
Can project risks be reduced or avoided with adequate planning?You cannot completely eliminate project hazards. It is challenging to anticipate every situation that can occur when a project is being carried out. Unwanted events can be detected before the project begins and transferred, retained/reduced, or shared.
What occurs following the signing of the project charter?Project planning is the following phase once you have a project charter, which comes after the business case. It is the project manager's obligation to do C and D when needed; it is not the sponsor's responsibility to lead that effort. That just leaves A as a legitimate sponsor duty for you.
To know more about project charter visit:-
https://brainly.com/question/30302496
#SPJ1
Monty is building a project team. He’s considered the project complexity, team size, and location. What else should Monty consider when building a team against project resource requirements?
A. JIT modeling
B. Executable specifications
C. Prioritized requirements
D. Organization distribution
When building a team against project resource requirements, Monty should consider the skill sets and expertise needed, as well as the availability and allocation of resources such as budget, equipment, and technology. The correct option from the given choices is C. Prioritized requirements.
Prioritized requirements refer to the process of organizing and ranking project requirements based on their importance and urgency. It involves identifying and assessing the needs, objectives, and constraints of the project, and then determining the order in which these requirements should be addressed and fulfilled.
Prioritization ensures that the most critical and valuable requirements are given higher priority, allowing the project team to focus their efforts and resources on the aspects that are essential for project success. This helps in managing time, budget, and resources effectively and enables the team to deliver the most valuable outcomes to stakeholders.
Learn more about Prioritized requirements here:
https://brainly.com/question/32588934
#SPJ12