The gases that are frequently found in water and can encourage corrosion are oxygen and carbon dioxide. These gases can react with metal surfaces, resulting in the formation of rust and other types of corrosion. Oxygen is a highly reactive gas that can cause the oxidation of metals, while carbon dioxide can lower the pH of water, making it more acidic and corrosive.
Chlorine and hydrogen sulfide are also known to cause corrosion, but they are not as common in water as oxygen and carbon dioxide. In order to prevent corrosion, it is important to control the levels of these gases in water, as well as other factors that can contribute to corrosion, such as temperature, pressure, and impurities. Corrosion can lead to damage and failure of equipment and infrastructure, so it is important to take steps to mitigate its effects. This can include using protective coatings, monitoring water quality, and implementing corrosion control measures.
These gases can react with metal surfaces, causing corrosion over time. Oxygen, when dissolved in water, can initiate an electrochemical reaction that leads to the oxidation of the metal, while carbon dioxide forms carbonic acid in the water, which can decrease the pH and promote acidic corrosion. This is a common issue in the water industry, where pipes and equipment are exposed to these gases and must be maintained regularly to minimize the effects of corrosion.
learn more about corrosion here: brainly.com/question/489228
#SPJ11
Calcium hydroxide has a Ksp of 4.68 x10^-6.
a. How many moles of calcium hydroxide will dissolve in 1 L of pure water (it’s molar solubility)?
b. At most, how many moles of calcium hydroxide will dissolve in 1 L of 3.25 M NaOH solution?
c. What minimum concentration of sodium hydroxide is needed to precipitate calcium from a 0.015 M solution of calcium chloride?
a) The molar solubility of calcium hydroxide in 1 L of pure water is 1.35 x 10⁻² mol/L.
b) In a 3.25 M NaOH solution, the maximum moles of calcium hydroxide that will dissolve is 1.44 x 10⁻² mol.
c) A minimum NaOH concentration of 0.030 M is needed to precipitate calcium from a 0.015 M solution of calcium chloride.
a) Ca(OH)₂ ⇌ Ca²⁺ + 2OH⁻
Ksp = [Ca²⁺][OH⁻]² = 4.68 x 10⁻⁶
Let x = molar solubility of Ca(OH)₂, so [Ca²⁺] = x, [OH⁻] = 2x
Ksp = x(2x)² => x = √(Ksp/4) = √(4.68 x 10⁻⁶/4) = 1.35 x 10⁻² mol/L
b) In 3.25 M NaOH, [OH⁻] = 3.25 M
Ksp = [Ca²⁺][(3.25 + 2x)²] => x = (Ksp - 3.25²) / (4 * 3.25) = 1.44 x 10⁻² mol
c) CaCl₂ + 2NaOH → Ca(OH)₂ + 2NaCl
[Ca²⁺] = 0.015 M, Ksp = [Ca²⁺][OH⁻]² => [OH⁻] = √(Ksp/[Ca²⁺]) = √(4.68 x 10⁻⁶/0.015) = 0.030 M
To know more about molar solubility click on below link:
https://brainly.com/question/28170449#
#SPJ11
The hydraulic grade at any point in a distribution system is made up of the following two components?
a) Flow and Pressure
b) Elevation and Volume
c) Velocity and Flow Rate
d) Elevation and pressure head
The hydraulic grade is made up of the elevation head and the pressure head at any point in a distribution system. As a result, option D.
The hydraulic grade at any location in a distribution system is the sum of the elevation and pressure heads at that point. The elevation head is the potential energy of water resulting from its height above a reference datum, whereas the pressure head is the potential energy of water resulting from its pressure.
The total potential energy of the water at that point in the system is represented by the sum of these two components. This hydraulic grade is significant in influencing water volume through the system since water will flow from points with higher hydraulic grade.
To know more about hydraulic grade, visit,
https://brainly.com/question/29356005
#SPJ4
which of the following terms is defined as the rate at which a planar flame moves through a stationary, quiescent flammable mixture of infinite extent?
Burning velocity is defined as the rate at which a planar flame moves through a stationary, quiescent flammable mixture of infinite extent.
D is the correct answer.
In relation to the unburned gas, burning velocity is the rate at which a flame front moves. As opposed to flame speed, this. The speed at which an unburned gas mixture in front of a laminar (planar) combustion wave propagates is known as the laminar burning velocity (SL).
The laminarness or turbulentness of a flow system affects the flame speed. The rate at which a fire can spread through the flammable mixture and ultimately throughout the system must be taken into account when calculating flame speed.
Learn more about Velocity:
https://brainly.com/question/29454757
#SPJ4
The complete question is:
which of the following terms is defined as the rate at which a planar flame moves through a stationary, quiescent flammable mixture of infinite extent?
A. static velocity
B. Downward velocity
C. Front velocity
D. Burning velocity
Is there a way to convert primary and secondary alkyl halides into carboxylic acids? Sure!!
Yes, there is a way to convert primary and secondary alkyl halides into carboxylic acids through a multi-step process known as the Grignard reaction.
First, perform a nucleophilic substitution reaction on the alkyl halide. This involves treating the primary or secondary alkyl halide with a nucleophile, such as hydroxide ions (OH-), to replace the halogen atom. This results in the formation of an alcohol.
Next, oxidize the alcohol to form a carboxylic acid. For primary alcohols, you can use a strong oxidizing agent like potassium permanganate (KMnO4) or chromic acid (H[tex]^{2}[/tex]CrO[tex]^{4}[/tex]). The reaction will convert the primary alcohol into a carboxylic acid. For secondary alcohols, first oxidize them to ketones using an oxidizing agent like potassium dichromate (K[tex]^{2}[/tex]Cr[tex]^{2}[/tex]O[tex]^{7}[/tex]).
Conversion of Ketone to Carboxylic Acid
After obtaining a ketone from the secondary alcohol, perform a reaction called the Baeyer-Villiger Oxidation to convert the ketone into an ester. This involves using an oxidizing agent, such as peroxyacids or hydrogen peroxide, to insert an oxygen atom between the carbonyl group and one of the alkyl groups. Finally, hydrolyze the ester using a base or an acid to form a carboxylic acid.
By following these steps, you can successfully convert primary and secondary alkyl halides into carboxylic acids.
More on alky halides: https://brainly.com/question/31377595
#SPJ11
To form AgCl(s) from KCl(aq) and AgNO3(aq), the mass of KCl should be 10.00 g less than that of AgNO3. Find the mass of AgNO3.
Sodium nitrate & the insoluble substance silver chloride are produced when silver nitrate & sodium chloride combine.
Describe a compound?A substance made up of more than one element is called a compound. Table salt, water, and carbon dioxide are a few examples of compounds.
The two fundamental categories of compounds are. The way the particles in the molecule bond to one another defines who we are. They are referred to as "molecular" and "salt" compounds, respectively.
Describe silver?White metallic element with the highest electrical and thermal conductivity of any material which is sonorous, elastic, very malleable, able to undergo an elevated level of polish, and primarily monovalent in compounds. symbol See Table of Chemical Elements for Ag.Silver's scientific name is an acronym for the Latin.
To know more about compound visit :
https://brainly.com/question/13516179
#SPJ1
pKa monosodium phosphate (conjugate acid)=2.1, why would an aqueous solution monosodium phosphate be ineffective for extracting benzoic acid from a diethyl ether solution
An aqueous solution of monosodium phosphate is ineffective for extracting benzoic acid from a diethyl ether solution due to its low pKa value and insufficient pH to promote the ionization and solubility of benzoic acid in the aqueous phase.
The pKa of the conjugate acid (monosodium phosphate) is 2.1, which indicates that it is a relatively weak acid. In an extraction process, a stronger acid is generally required to effectively transfer the benzoic acid from the organic phase (diethyl ether) to the aqueous phase.
Benzoic acid, with a pKa of approximately 4.2, is also a weak acid. For efficient extraction, the pH of the aqueous solution should be at least two units higher than the pKa of benzoic acid, which would be around 6.2 or higher. This allows the benzoic acid to ionize and become more soluble in the aqueous phase.
However, the monosodium phosphate solution would have a pH lower than this, making it less effective in promoting the ionization and extraction of benzoic acid from the diethyl ether solution.
For more such questions on benzoic acid, click on:
https://brainly.com/question/28299797
#SPJ11
4.5. Steel is particularly well suited for structural framing because of its relative I. strength. II. ease of fabrication. III. low cost. Iv. corrosion resistance. V. fire resistance. A.I and IV B. I and ill C. II, IV, and V D. I, II, ill, and V
The answer is B. I and ill. Steel is particularly well suited for structural framing because of its relative strength and low cost.
Steel is well suited for structural framing due to its high strength and ease of fabrication. It is also a relatively low-cost material, which makes it an attractive option for many construction projects. However, steel is not known for its corrosion resistance, and it can be vulnerable to rust and other forms of corrosion over time. Steel is also not particularly fire resistant, and it can lose its strength quickly when exposed to high temperatures.
Therefore, only options (I) and (III) are correct, indicating that steel is well suited for structural framing because of its strength and low cost.
To learn more about corrosion, refer:-
https://brainly.com/question/31313074
#SPJ11
When disinfecting a new or repaired main, what is the minimum chlorine residual at the extreme end of the main after standing for 24 hours?
a.) 15 mg/L
b.) 20 mg/L
c.) 25 mg/L
d.) 30 mg/L
The minimum chlorine residual at the extreme end of the main after standing for 24 hours when disinfecting a new or repaired main is c.) 25 mg/L.
When disinfecting a new or repaired main, the American Water Works Association (AWWA) recommends a minimum chlorine residual of 50 mg/L at the upstream end of the main and 25 mg/L at the downstream end after a contact time of 24 hours. This ensures that the disinfectant has sufficient time to reach and eliminate any bacteria or viruses that may be present in the water mains. The residual chlorine concentration is typically measured using a chlorine test kit or a chlorine analyzer.
To know more about Disinfection:
https://brainly.com/question/30545640
#SPJ11
. In total, the human body uses more than _______ elements in ways and quantities that are unique to
us.
The Human body uses more than 60 elements in ways and quantities that are unique to us. The human body is a complex organism that requires a wide range of essential elements for its proper functioning. These elements, also known as trace elements or micronutrients, are required in small quantities but play critical roles in various biological processes. Examples of essential elements include calcium, phosphorus, potassium, sodium, magnesium, iron, zinc, copper, manganese, iodine, selenium, and many others.
These elements are involved in diverse physiological functions such as enzymatic reactions, cellular signaling, bone formation, immune response, metabolism, and DNA synthesis, among others. Each element has a specific role in the body, and their deficiencies or excesses can have significant impacts on health and well-being. The unique utilization of these elements in the human body is a testament to the complexity and intricacy of human biology.
learn more about Human body uses more than 60 elements here:
https://brainly.com/question/6662752
#SPJ11
44 grams of carbon dioxide, CO2, is dissolved in 5000 mL of solution. Determine the molarity (M).
The molarity of the solution is 0.20 M.
When 5 gram of table salt (NaCl) are dissolved in 500 mL of water, the molarity of the solution can be calculated. Since NaCl has a molar mass of 58.44 g/mol, the solution contains the following number of moles of NaCl:
The first step is to convert the given mass of CO2 to:
1 mole CO2 = 44.01 g
44 g CO2 = (44 g) / (44.01 g/mol) = 0.999 moles CO2
Next, we need to find the volume of the solution in liters:
5000 mL = 5.0 L
Finally, we can use the formula for molarity:
Molarity = moles of solute / liters of solution
Molarity = 0.999 moles CO2 / 5.0 L = 0.20 M
Therefore, the molarity of the solution is 0.20 M.
Molarity, often known as moles per liter of solution (mol/L or M), is a unit of measurement for the concentration of a solute in a solution.
learn more about molarity here
https://brainly.com/question/30404105
#SPJ1
Write a poem
at least five lines long to describe
the organization of matter by the arrangement
of its atoms.
Answer:
Atoms dance in a cosmic ballet,
Each one with a role to play,
They join together in a grand display,
Creating molecules in an endless array,
Organizing matter in a beautiful way.
A(n) _____ removes hydrogen ions and a(n) _____ releases hydrogen ions.
a) compound, element
b) acid, base
c) base, acid
d) molecule, acid
e) element, compound
acid and base.
A base is a chemical that removes hydrogen ions from water by releasing hydroxide ions (OH-), whereas an acid produces hydrogen ions (H+) when it dissolves in water. Acids have a low pH, while bases have a high pH, and are sometimes viewed as the two extremes of a pH scale. An acid and a base can react to neutralise one another and produce water and salt when they are together. We refer to this as an acid-base reaction. The pH scale, which spans from 0 (extremely acidic) to 14 (very basic or alkaline), with 7 being neutral, measures the concentration of hydrogen ions in a solution.
learn more about acid here:
https://brainly.com/question/14072179
#SPJ11
Question 57
Shock loading refers to:
a. A huge influx of fish to a breeding ground
b. Large scale reproductive failure of fish in an area
c. Several months' accumulation of acid quickly melting into a spawning area
d. The overabundance of frog tadpoles emerging in an area
The term "shock loading" refers to: c. Several months' accumulation of acid quickly melting into a spawning area.
Shock loading refers to a sudden and intense increase in pressure or weight on a structure or system. In the context of fish and aquatic ecosystems, shock loading can refer to sudden increases in nutrients, pollutants, or sediment that can have negative impacts on fish populations and their habitats. Shock loading occurs when a large amount of a pollutant or stressor is suddenly introduced into an environment, causing an immediate and potentially harmful impact on the organisms within that area. In this case, the accumulated acid can have a significant impact on the fish population in the spawning area.
To learn more about acid click here https://brainly.com/question/14072179
#SPJ11
Question 89
The ability of a soil to absorb and allow water and air to pass through is related to all of the following except
a. chemical composition
b. texture
c. cation exchange capacity
d. granular structure
The capacity of a soil to hold and let through air and water is unrelated to its chemical composition. Hence, option a.
The ability of a soil to absorb water and for air to travel through also depends significantly on the soil structure. Granular structure, texture, and cation exchange capacity all affect the structure of the soil and its permeability.
Cation exchange capacity, on the other hand, refers to the soil's capability to store and exchange positively charged ions. Texture relates to the size distribution of soil particles. The organization of soil particles into clusters or aggregates is referred to as granular structure.
To know more about properties of soil, visit,
https://brainly.com/question/17207171
#SPJ4
what type of hybrid orbitals do you expect for the metal ion in the coordination compound na[agcl2]?
The silver ion in Na[AgCl₂] is expected to have unhybridized s orbitals and p orbitals involved in coordination bonding.
Explain the geometry of the coordination compound Na[AgCl₂]?In the coordination compound Na[AgCl₂], the silver ion (Ag⁺) has a d10 electronic configuration, which means that it does not require any hybridization to form complex compounds. Therefore, the silver ion in Na[AgCl₂] is expected to have unhybridized s orbitals and p orbitals involved in coordination bonding.
The chlorine atoms in the compound each contribute one electron to form a coordinate covalent bond with the silver ion, resulting in a linear molecular geometry with a bond angle of 180 degrees. Overall, the coordination complex has a tetrahedral geometry with a coordination number of two.
Learn more about geometry here:
https://brainly.com/question/31408211
#SPJ1
Only primary alcohols can be oxidized to carboxylic acids. T/F?
Answer: True. Only primary alcohols can be oxidized to carboxylic acids using an oxidizing agent such as potassium permanganate (KMnO4) or chromium trioxide (CrO3) in an acidic solution. Secondary alcohols can be oxidized to ketones, but not to carboxylic acids, while tertiary alcohols cannot be oxidized at all using these reagents.
Explanation:
After synthesizing n-butylacetate from acetic acid and 1-butanol, u take an IR spec. of the product. What functional group peak that would show up in the starting materials SHOULD NOT show up if your product is ABSOOLUTELY pure?
If the n-butylacetate synthesized from acetic acid and 1-butanol is absolutely pure, the functional group peak of the hydroxyl group (-OH) should not show up in the IR spectrum of the product.
This is because during the synthesis process, the hydroxyl group of the 1-butanol reacts with the carboxylic acid group of acetic acid to form an ester linkage, resulting in the formation of n-butylacetate.
The ester linkage is a carbonyl group (-C=O) that replaces the hydroxyl group in the product, resulting in a decrease or complete absence of the hydroxyl group peak in the IR spectrum of the product. Therefore, the absence of the hydroxyl group peak in the IR spectrum of the synthesized n-butylacetate would be an indication of its purity.
However, it is important to note that other functional groups such as the carbonyl group (-C=O) and the C-H stretching vibrations may be present in the IR spectrum of the synthesized n-butylacetate. Therefore, it is crucial to interpret the IR spectrum carefully to identify all the functional groups present in the synthesized product.
For more such questions on acetic acid, click on:
https://brainly.com/question/24304533
#SPJ11
Part of the recrystallization process is the preparation and filtration of a supersaturated solution containing the desired end product. The following are steps for the preparation of a supersaturated solution; arrange them in the correct order.
To prepare a supersaturated solution, the following steps should be arranged in the correct order:
Dissolve the solute in a suitable solvent: The solute, typically a solid, is added to the solvent and stirred or heated to facilitate dissolution.
Heat the solution: Applying heat increases the solubility of the solute in the solvent, allowing more solute to dissolve.
Filter the solution: This step involves removing any insoluble impurities or undissolved particles from the solution by passing it through a filter paper or other filtration medium.
Cool the solution slowly: The supersaturation is achieved by cooling the solution slowly, allowing the excess solute to remain dissolved even though it would normally exceed the solubility limit at lower temperatures.
Seed the solution: Introducing a small crystal or seed of the solute into the cooled solution provides a starting point for crystal growth and encourages the formation of the desired end product.
Hence, by following these steps in the correct order (1, 2, 3, 4, 5), a supersaturated solution can be prepared for the recrystallization process.
Learn more about recrystallization here:
https://brainly.com/question/32928097
#SPJ 12
Perform the following calculations. 20 g of common salt (NaCl) is dissolved in water to
make 1.0 L (1000g) saline solution. Calculate the concentration of the solution in
a) Grams per liter
b) Molarity
c) Part per million (ppm)
d) Percentage composition
Answer:
Explanation:
A) The concentration = The mass of the solute/the total volume
=m/v
= 20g/1L
B) The concentration = n/v
first we have to find the number of moles in 20g of NaCl
n=m/M
n=20mol/58.5
1000cm^3=1000ml
1000cm^3=1dm^3
C=n/v
= 20/58.5
= 0.341[tex]moldm^{-3}[/tex]
c) 20g*10^6/1000g
=20000ppm
d)20*100/1000 = 2%
at the end of a reaction it is important to remove the solvent from a solid product (more than one answer may be correct)
Distillation is a process where the solvent can be removed from a liquid solution.Evaporation is a process where the solvent can be removed by exposing the liquid solution .
What is solution ?A solution is a means of resolving a problem, dispute, or difficult situation. It is a way of coming to an agreement on a particular issue. Solutions can take many forms, including a compromise, mediation, arbitration, or a resolution. Solutions often involve a combination of approaches and involve all interested parties in the process. Solutions can be developed through dialogue, negotiation, and collaboration, as well as through research, analysis, and experimentation. Solutions need to be practical, achievable, and realistic in order to be successful.
Filtration is a process where the solid product can be separated from the liquid solution. Crystallization is a process where the solvent can be removo learn more about moleculesed from the solution.
To learn more about solution
https://brainly.com/question/25326161
#SPJ4
What is liquid, gas and solid?
liquid, gas and solid are the three states of matter, at different temperatures and physical conditions.
When particles of matter are tightly packed together and have a fixed shape and volume, the state of matter is said to be solid. Solids include things like ice, rocks, and metal.
When particles of matter are in a liquid state, they have a fixed volume, are loosely packed together, and adopt the shape of the container. Liquids include things like water, oil, and gasoline.
When particles are widely spaced apart and lack a fixed shape or volume, the state of matter is called a gas. Helium, oxygen, and air are some examples of gases.
Learn more about matter at:
brainly.com/question/28945834
#SPJ1
831.8 mL of gas is at 49.2 C. It is compressed to a volume of 79 mL. What is the new temperture. Express your answer in Kelvin.
The temperature T2 is 343.91 K. We would need additional information about the pressures at the initial and final states of the gas to calculate the final temperature.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It is commonly associated with the sensation of hotness or coldness, and is typically measured in units such as Celsius (°C), Fahrenheit (°F), or Kelvin (K).
To find the new temperature of the gas after compression, we can use the combined gas law, which relates the initial and final states of a gas undergoing changes in pressure, volume, and temperature.
The combined gas law formula is given as:
(P1 * V1) / T1 = (P2 * V2) / T2
P1 = pressure of the gas at the initial state (unknown)
V1 = initial volume of the gas = 831.8 mL
T1 = initial temperature of the gas = 49.2 + 273.15 K (converting Celsius to Kelvin)
P2 = pressure of the gas at the final state (unknown)
V2 = final volume of the gas = 79 mL
T2 = final temperature of the gas (unknown)
We need to solve for T2, the final temperature of the gas.
Rearranging the formula to solve for T2, we get:
T2 = (P2 * V2 * T1) / (P1 * V1)
Now we can plug in the given values and solve for T2:
T2 = (P2 * 79 * (49.2 + 273.15)) / (P1 * 831.8)
T2 = (P2 * 79 * (49.2 + 273.15)) / (P1 * 831.8)
T2 = (2.0 atm * 79 * (49.2 + 273.15 K)) / (1.5 atm * 831.8)
T2 = 343.91 K
Therefore, the temperature T2 is 343.91 K.
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
277K is the new temperature if 831.8 mL of gas is at 49.2 C and is compressed to a volume of 79 mL.
What is the definition of the ideal gas law?
The rule that states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of a single gram of an ideal gas.
The phrase "ideal gas" describes a fictitious gas made up of molecules that adhere to the following principles: No attraction or repellence exists between the molecules of ideal gases. The sole interaction between molecules of an ideal gas would be an elastic collision when they collided or an elastic collision with the container walls.
(P1 * V1) / T1 = (P2 * V2) / T2
V1 = 831.8 mL
T1 = 49.2 + 273.15 K
V2 = 79 mL
T2 = final temperature of the gas
To solve for T2, the final temperature of the gas.
T2 = ( V2 * T1) / ( V1)
T2 = 79*322.35/831.8
T2 = 277K
To learn more about Temperature use:
brainly.com/question/26866637
#SPJ1
determine the volume in milliliters of a 0.270 m 0.270 m naoh naoh solution needed to neutralize a 155 ml 155 ml solution of 0.180 m 0.180 m hcl hcl and 0.360 m 0.360 m h2so4.
Answer:
19⋅mL . We know that. Concentration=Amount of substance in molesVolume of solution.
Explanation:
The volume in mililitres of a solution of 0.270 M NaoH solution needed to neutralize a 155 ml solution is 950 ml
We have
N₁V₁=N₂V₂
Where N= normality, V=Volume
Normality= basicity ×molarity
For H₂SO₄ basicity=2
Normality =0.360 × 2
=0.720 N
For HCl basicity=1
normality = 0.180×1
=0.180 N
Total strength N₂= 0.720N +0.180N =0.900N
N₁= 0.270 N
V₂= 285 ml
substituting all values we get
V₁= N₂V₂/N₁
=0.900N ×285ml/0.270N
=950 ml
To know more about NaOH solution here
https://brainly.com/question/30007576
#SPJ2
A balloon is inflated with 4.0 L of gas in a room with a temperature of 26 °C. The next day the temperature in the room is 18°C. What is the volume of gas in the balloon if the pressure is constant?
SHOW YOUR WORK
Answer:
the volume of gas in the balloon is 3.89L
Thrust from a water surge almost always acts ______ to the inside surface that it pushes against.
a.) Vertically
b.) Horizontally
c.) Perpendicular
d.) Vertically and horizontally
Thrust from a water surge almost always acts vertically to the inside surface that it pushes against.
A surge in pressure or wave caused when a fluid is in motion is called hydraulic shock. Usually a liquid and sometimes a gas is used to change direction , force stop suddenly or cause a momentum change. This phenomenon usually occurs when a valve suddenly closes at one end of a pipeline system. Due to this, pressure in the form of wave is found to propagate in the pipe.
Major problems can be caused by this pressure such as ,the noise or vibration on the pipe completely ruptures the pipe. This thrust from water surge always acts vertically to the surface.
To know more about water surge here
https://brainly.com/question/14136640
#SPJ4
when zinc metal is placed in hcl, bubbling due to formation of hydrogen gas is observed. therefore, which is more reactive: zn or h2?
Answer:zinc
Explanation:zinc is more reactive than hydrogen
How many neutrons are in the nucleus of an atom of 118/50 Sn?
There are 68 neutrons in the nucleus of an atom of 118/50 Sn (tin).
To determine the number of neutrons in the nucleus of an atom of 118/50 Sn, we need to understand the atomic structure and notation. The symbol "Sn" represents the element tin, and the numbers 118 and 50 are mass number (A) and atomic number (Z), respectively.
The mass number (A) is the sum of protons and neutrons in the nucleus, while the atomic number (Z) indicates the number of protons in the nucleus. In this case, the atomic number is 50, which means there are 50 protons in the tin atom.
To find the number of neutrons (N) in the nucleus, we use the following formula:
N = A - Z
Substitute the values:
N = 118 - 50
N = 68
You can learn more about neutrons at: brainly.com/question/28992636
#SPJ11
The maximum theoretical suction life of a centrifugal pump at sea level is approximately?
a) 15 feet
b) 20 feet
c) 34 feet
d) 40 feet
The maximum theoretical suction life of a centrifugal pump at sea level is approximately a) 15 feet
What is the hypothetical pump's suction lift at mean sea level?
The maximum height that any centrifugal pump may theoretically raise water is 10.33 metres above sea level. Suction lift is the vertical distance on the suction side of the pump between the pump impeller and the liquid surface if the liquid is below the pump datum.
The hoover is created by the ground-level pump, which can theoretically raise a maximum of roughly 30 feet (34 feet if a flawless hoover could be created).
learn more about centrifugal pump
https://brainly.com/question/13427593
#SPJ1
What is the empirical formula for C6H14O?A) C6H14O B) C3H7O C) C2H7O D) C12H28O2 E) CHO
The empirical formula for C6H14O is B) C3H7O. This is because the empirical formula represents the simplest whole number ratio of atoms in a compound, and in this case, dividing all the subscripts by the greatest common factor of 2 gives C3H7O.
The empirical formula for C6H14O is B) C3H7O. An empirical formula represents the simplest whole-number ratio of elements in a compound. In this case, you can divide each element's subscript by the greatest common divisor (which is 2) to get C3H7O.
The simplified versions of molecular formulas are called empirical formulas. Similar to lowering a fraction, determining a molecule's empirical formula is a straightforward operation. The molecular formula of a molecule must be split into each of its component parts using a common value.
To know more about empirical formula click here:
https://brainly.com/question/14044066
#SPJ11
Question 6 Marks: 1 Alkalinity of water is desirable at levels ofChoose one answer. a. 0 to 30 mg/l b. 0 to 500 mg/l c. 30 to 100 mg/l d. 0 to 5 mg/l
Alkalinity of water is desirable at levels of 30 to 100 mg/l.
Alkalinity refers to the ability of water to neutralize acids. It is an important parameter in determining the overall quality of water for human consumption and other uses. Alkalinity levels of 30 to 100 mg/l are considered desirable as they help to stabilize the pH of the water and prevent corrosion of pipes and plumbing fixtures. Water with alkalinity levels outside of this range may require treatment to adjust the pH and improve its quality.
Water's alkalinity determines how well it can withstand acidification. Contrast it with basicity, a pH scale absolute measurement that shouldn't be confused with it. A buffer solution made of weak acids and their conjugate bases has an alkalinity that determines its potency. It is determined by titrating the solution with an acid, like HCl, until the pH abruptly changes or until it reaches a known endpoint where that happens. Alkalinity is measured using concentration units such meq/L (milliequivalents per litre), eq/kg (microequivalents per kilogramme), or mg/L CaCO3 (milligrammes per litre of calcium carbonate). The amounts of acid administered as a titrant are corresponding to each of these measurements.
To know more about Alkalinity click here:
https://brainly.com/question/31463506
#SPJ11