According to the equation, the monthly fee that Sara paid was $60.
Let's start by assigning some variables. Let x be the monthly fee that Sara paid and let y be the number of months that Sara was a member of the gym. We know that Sara paid $15.95 to become a member, so her total cost can be represented by the equation:
Total Cost = Initial Cost + Monthly Fee x Number of Months
$735.95 = $15.95 + x x y
Now we have an equation with two variables. To solve for x, we need to isolate it on one side of the equation. We can do this by subtracting $15.95 from both sides of the equation:
$720 = x x y
Next, we need to solve for x. Since we don't know the value of y, we can't solve for x directly. However, we do know that Sara was a member for 12 months, so we can substitute y = 12 into the equation:
$720 = x x 12
Now we can solve for x by dividing both sides by 12:
$60 = x
To know more about equation here
https://brainly.com/question/10413253
#SPJ4
For three seasons each year, a travel agent accommodates a certain number of people in four different tours: Tours A, B, C and D. This is shown as matrix S below. The cost ($) per tour, and the number of brochures printed for each person’s information pack per tour, is shown below as matrix T.
How much did the travel agency make for Summer Tour B?
a. 17,325
b. 22,050
c. 26,775
d. 29,400
e. 61,200
Answer: 22,050.
Step-by-step explanation: The number of individuals who went on Summer Visit B is given within the moment push of lattice S as 150.
The fetched per individual for Summer Tour B is given within the moment push of matrix T as $145.
Hence, the whole income created from Summer Visit B is:
150 individuals × $145 per individual = $21,750
What is the coordinate of R
Answer:
if you go into your reading lessone on one of the sentences in page 2 or 4 there is the answer hope this helped
Step-by-step explanation:
a probability distribution of the claim sizes for an auto insurance policy is given in the table below: claim size 20 30 40 50 60 70 80 probability 0.10 0.10 0.10 0.20 0.15 0.10 0.25 what percentage of the claims are within one standard deviation of the mean claim size?
55% of the claims are within one standard deviation of the mean claim size.
To find the percentage of claims that are within one standard deviation of the mean claim size, we first need to calculate the mean and standard deviation of the distribution.
The mean claim size is:
u = (20 × 0.10) + (30 × 0.10) + (40 × 0.10) + (50 × 0.20) + (60 × 0.15) + (70 × 0.10) + (80 × 0.25) = 54
The variance can be calculated as follows:
s^2 = [[tex](20-54)^{2}[/tex] × 0.10] + [[tex](30-54)^{2}[/tex] × 0.10] + [[tex](40-54)^{2}[/tex] × 0.10] + [[tex](50-54)^{2}[/tex] × 0.20] + [[tex](60-54)^{2}[/tex] × 0.15] + [[tex](70-54)^{2}[/tex] × 0.10] + [[tex](80-54)^{2}[/tex] × 0.25] = 340
The standard deviation is the square root of the variance:
s = √340 ≈ 18.44
To find the percentage of claims that are within one standard deviation of the mean claim size, we need to find the range of claim sizes that fall within the interval (u - s, u + s).
(u - s) = 54 - 18.44 = 35.56
(u + s) = 54 + 18.44 = 72.44
We can see from the table that the claim sizes 40, 50, 60, and 70 fall within this range, and their probabilities add up to:
0.10 + 0.20 + 0.15 + 0.10 = 0.55
Therefore, 55 percentage of the claims are within one standard deviation of the mean claim size.
To learn more about standard deviation here:
https://brainly.com/question/23907081
#SPJ4
a quality control inspector wants to test whether the average weight of product on the line has varied from the specified value of 16 ounces. he takes a simple random sample of 100 products and obtains a mean of 16.3 and a standard deviation of 2.5. what are the hypotheses of this test?
Answer: The hypotheses of this test are:
Null hypothesis: The average weight of the product on the line is equal to the specified value of 16 ounces.
Alternative hypothesis: The average weight of the product on the line is different from the specified value of 16 ounces.
Step-by-step explanation:
i need help with this math hw
The situation that represents a proportional relationship is " Renting a movie for $5 per day"
What is proportion relationship?Proportional relationships are relationships between two variables where their ratios are equivalent.
For example, A student reads 5 novels per 2days is a statement that shows the relationship between the Novels read and the number of days. This means that 10 novels will be read in 4 days.
In general a proportion relationship should obey,
change in y/ change in x= constant. The constant is the slope.
Therefore the statement that best explain a proportional relationship is " Renting a movie for $5 per day"
learn more about proportional relationship from
https://brainly.com/question/12242745
#SPJ1
Suppose that Leni and Thom are lawyers and each has a taxable income of $230,000. They can't decide if they should be married in December or in January. If they marry in December, then they are considered married for the entire tax year and could file a joint return. If they get married in January of the next year, they would file a separate return each as a single taxpayer. Examine Schedules X and Y-1. Which filing status would yield the lower tax? If so, by how much? is there really a marriage penalty?
Getting married in December and filing a joint return would result in a lower tax liability by: $65,917.
Based on the given tax schedules, if Leni and Thom get married in December and file a joint return, their total tax liability would be:
$4,220 for the first $19,900 of taxable income
$20,227 for the remaining $210,100 of taxable income ($230,000 - $19,900)
Total tax liability: $24,447
If they get married in January of the next year and file separate returns, each as a single taxpayer, their total tax liability would be:
Leni's tax liability: $45,182
Thom's tax liability: $45,182
Total tax liability: $90,364
Therefore, getting married in December and filing a joint return would result in a lower tax liability by: $90,364 - $24,447 = $65,917.
For more details regarding liability, visit:
https://brainly.com/question/29857441
#SPJ1
Approximate the square root to the nearest integer.
√23
The square root of the number 23 is 5 after using the division method the answer is 25.
What is a number?A number is a mathematical entity that can be used to count, measure, or name things. For example, 1, 2, 56, etc. are the numbers.
It is given that:
The number is 23 which is a real number and positive number.
As we know we can find the square root of a positive numbers only, the square root of a negative number cannot exist
The square root of the number 23 = [tex]\sqrt{23}[/tex]
The sign √ is a radical sign.
After using the division method:
[tex]\sqrt{23} = 4.7958[/tex]
After reducing the number up to two decimal places:
[tex]= 4.79[/tex]
Rounding the above number to the whole:
[tex]= 4.79 \thickapprox 5[/tex]
[tex]5\times5 = 25[/tex]
Thus, the square root of the number 23 is 5 after using the division method the answer is 25.
Learn more about the number here:
brainly.com/question/17429689
Find the missing measures in a circle in a square
The measure of the missing angle in the cyclic quadrilateral is 104°
Circle Geometry: Calculating the measure of the inscribed angleFrom the question, we are to determine the measure of the inscribed angle in the given diagram
In the given diagram, we have a cyclic quadrilateral.
From one of the circle theorems, we known that
The sum of the opposite angles of cyclic quadrilateral are supplementary. That is they sum up to 180 degrees.
Let the unknown angle measure be x,
Then,
We can write that
x + 76° = 180°
x = 180° - 76°
x = 104°
Hence, the missing angle measure is 104°
Learn more on Circle Geometry here: https://brainly.com/question/31400801
#SPJ1
B. Solve:
1. If there are 13 yellow balls and 25 brown balls in a jar, what is the probability that Jaide will pick out a brown ball from the jar?
2. From a pack of 52 cards, a card is drawn at random. What is the probability of getting a king?
Answer:
Step-by-step:
1.The probability of picking a brown ball can be calculated as:
Probability of picking a brown ball = Number of brown balls / Total number of balls
Number of brown balls = 25
Total number of balls = 13 + 25 = 38
Probability of picking a brown ball = 25/38
Probability of picking a brown ball is approximately 0.658 or 65.8%
Therefore, the probability of Jaide picking a brown ball from the jar is approximately 0.658 or 65.8%.
2.There are four kings in a pack of 52 cards (one king for each suit). Therefore, the probability of drawing a king from a pack of 52 cards can be calculated as:
Probability of drawing a king = Number of kings / Total number of cards
Number of kings = 4
Total number of cards = 52
Probability of drawing a king = 4/52
Probability of drawing a king is approximately 0.077 or 7.7%
Therefore, the probability of getting a king when drawing a card at random from a pack of 52 cards is approximately 0.077 or 7.7%.
Developers determine the specifics of how to build a system in the _____ phase.
a. analysis
b. design
c. implementation
d. testing
Developers determine the specifics of how to build a system in the design phase. b
The design phase and its importance:
Define Objectives:
The design phase begins after the completion of the analysis phase, where developers have gathered and evaluated requirements.
The main objective of the design phase is to create a blueprint for the system that addresses all identified requirements.
Create Architectural Design:
During this step, developers establish the overall structure of the system, including its components, their relationships, and the interactions between them.
This architectural design provides a high-level view of the system's organization.
Design System Components:
With the architectural design in place, developers focus on designing individual components or modules of the system. They create detailed specifications, which include the functionality, inputs, outputs, and processes for each component.
Design User Interface:
The user interface design involves creating a user-friendly and efficient way for end-users to interact with the system. This can include designing screen layouts, menus, buttons, and other interface elements.
Validate Design:
The final step in the design phase is to ensure that the proposed design meets all the requirements identified during the analysis phase.
Developers may use various methods, such as reviews and simulations, to validate their design before proceeding to the implementation phase.
The design phase is a crucial part of the system development process, as it defines how the system will be built, ensuring it meets the needs of its users and the project's objectives.
For similar questions on Developer
https://brainly.com/question/29504128
#SPJ11
DUE FRIDAY PLEASE HELP WELL WRITTEN ANSWERS ONLY!!!!
The measure of the angle LAF is 4°
Explain the term angle
An angle is a geometric figure formed by two rays that share a common endpoint called a vertex. The rays are usually referred to as the sides of the angle. Angles are measured in degrees or radians and are used in various fields, including mathematics, physics, and engineering, to describe and calculate shapes and movements.
According to the given information
Here we have:
mYL + mSF = 360°
We also know that mYS = 48 degrees and mLF = 160 degrees. Since arc YS and arc LF are on the same circle, they must add up to 360 degrees. Therefore:
mYS + mLF + mYSF = 360°
Substituting the given values, we have:
48 + 160 + mYSF = 360°
Simplifying and solving for mYSF, we get:
mYSF = 152°
Now we can find the measure of the central angle LSF that intercepts arc LF by subtracting mYSF from the measure of the arc LF:
mLF - mYSF = 160 - 152 = 8°
Finally, we can find the measure of angle LAF by dividing the central angle LSF in half, since angle LAF is an inscribed angle that intercepts arc LF:
mLAF = 1/2 * mLSF = 1/2 * 8 = 4°
Therefore, m/LAF = 4 °
To know more about angle visit
brainly.com/question/28451077
#SPJ1
The radius of a circle is 9 inches. What is the area of the circle to the nearest tenth? Question 2 options: 28.3 square inches 56.5 square inches 224.8 square inches 254.3 square inches
The area of the circle rounded of to the nearest tenth having radius 9 inches is 254.3 square inches.
Hence option d is the correct answer.
The radius of a circle is, say r = 9 inches
The formula of calculating area of a circle is,
Area = πr² (square units)
= π(9)² square inches
= 81π square inches
Let us take π= 3.14 (approximated up to two decimal places).
Thus, area of the circle = 81(3.14) square inches = 254.34 square inches
Rounding of a number is a process of approximating the original number to some decimal points resulting the original number to shorten up for more explicit representation.
Rounding of a number to its nearest tenth gives the original number to round of to one decimal place.
Here Area = 254.34 square inches is rounded of to the nearest tenth is 254.3 square inches, since the digit after the first decimal place of the original number is lesser than 5 then we round down the number by decreasing the previous place value digit by 1.
To know more about rounding of here
https://brainly.com/question/29878750
#SPJ4
1/4 exponent 4 equal to in fraction form
Answer:
(1/256)
Step-by-step explanation:
[tex](\frac{1}{4})^{4} = \frac{1^{4} }{4^{4} } = \frac{1}{256}[/tex]
Using laws of exponents I distributed the exponent to the fraction and solved.
If I was asked to think of a number and multiply it by 2, I could
write this algebraically as 2x.
Write the following algebraically, using x as your unknown.
"I think of a number, take away 1 and multiply the result by 3."
Answer:
"I think of a number, take away 1 and multiply the result by 3" can be written algebraically as:
3(x - 1)
where x is the unknown number that is being thought of.
We subtract 1 from x because the problem asks to "take away 1", and then we multiply the result by 3 because the problem asks to "multiply the result by 3".
So the expression 3(x - 1) represents the result of thinking of a number, taking away 1, and multiplying the result by 3.
help! as soon as possible
The quadrilateral is a type of "kite", as the pair of adjacent angles are equal.
Explain about the features of kite:A quadrilateral known as a kite has four sides that may be grouped into two adjacent pairs of equal-length sides, and the diagonals cross each other at right angles. The quadrilateral is a polygon with four sides.
Kite's two diagonals meet at a right angle to form its properties.A kite's primary diagonal is symmetrical.The diagonal's primary opposed angles are equal.A set of congruent triangles having a common base can be thought of as the kite.The kite is split into two isosceles triangles by the shorter diagonal.Thus, the quadrilateral is a type of "kite", as the pair of adjacent angles are equal.
Know more about the kite
https://brainly.com/question/30763486
#SPJ1
after a snowstorm city workers removed an estimated 10000 cubic yards of snow from the downtown area if this snow were apread in an even layer ocer the entire rectangular football field shown below about how many yards deep would the layer of snow be
The 10,000 cubic yards of snow were spread evenly over the rectangular football field, the layer of snow would be approximately 1.56 yards deep.
To determine how many yards deep the layer of snow would be if spread evenly over the rectangular football field, we need to know the volume of the snow and the area of the football field.
First, let's find the area of the football field. Assuming standard dimensions for a football field, we have:
Length = 120 yards
Width = 53.3 yards
Area = Length x Width
Area = 120 yards x 53.3 yards
Area = 6,396 square yards
Now, let's find the volume of the snow. We are given that 10,000 cubic yards of snow were removed from the downtown area, so the volume is:
Volume = 10,000 cubic yards
Finally, to find the depth of the layer of snow, we can divide the volume of the snow by the area of the football field:
Depth = Volume / Area
Depth = 10,000 cubic yards / 6,396 square yards
Depth ≈ 1.56 yards
Therefore, if the 10,000 cubic yards of snow were spread evenly over the rectangular football field, the layer of snow would be approximately 1.56 yards deep.
Learn more about cubic yards
https://brainly.com/question/3240972
#SPJ4
Question 3
A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.
5, 5, 6, 8, 10, 15, 18, 20, 20, 20, 20, 20, 20
A graph titled Donations to Charity in Dollars. The x-axis is labeled 1 to 5, 6 to 10, 11 to 15, and 16 to 20. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 1 to 5, up to 3 above 6 to 10, up to 1 above 11 to 15, and up to 7 above 16 to 20.
Which measure of variability should the charity use to accurately represent the data? Explain your answer.
The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 13 is the most accurate to use, since the data is skewed.
The range of 20 is the most accurate to use to show that they have plenty of money.
The IQR of 20 is the most accurate to use to show that they need more money.
Question 4
The circle graph describes the distribution of preferred transportation methods from a sample of 400 randomly selected San Francisco residents.
circle graph titled San Francisco Residents' Transportation with five sections labeled walk 40 percent, bicycle 8 percent, streetcar 15 percent, bus 10 percent, and cable car 27 percent
Which of the following conclusions can we draw from the circle graph?
Together, Streetcar and Cable Car are the preferred transportation for 168 residents.
Together, Walk and Streetcar are the preferred transportation for 55 residents.
Bus is the preferred transportation for 45 residents.
Bicycle is the preferred transportation for 50 residents.
Question 5
The line plot displays the number of roses purchased per day at a grocery store.
A horizontal line starting at 1 with tick marks every one unit up to 10. The line is labeled Number of Rose Bouquets, and the graph is titled Roses Purchased Per Day. There is one dot above 1 and 2. There are two dots above 8. There are three dots above 6, 7, and 9.
Which of the following is the best measure of variability for the data, and what is its value?
The range is the best measure of variability, and it equals 8.
The range is the best measure of variability, and it equals 2.5.
The IQR is the best measure of variability, and it equals 8.
The IQR is the best measure of variability, and it equals 2.5.
The correct answer is: The IQR of 13 is the most accurate to use, since the data is skewed. (Option B).
The correct answer is: Together, Streetcar and Cable Car are the preferred transportation for 168 residents. (Option A).
The correct answer is: The IQR is the best measure of variability, and it equals 6.
How to Solve the Problem?1. Since the data is skewed, it is not appropriate to use the range as a measure of variability. The range is sensitive to extreme values and can be misleading in skewed data. The interquartile range (IQR) is a better measure of variability for skewed data since it is not affected by extreme values. Therefore, the charity should use the IQR of 13 as the measure of variability for this data.
2. From the circle graph, we can draw the following conclusion:
Together, Streetcar and Cable Car are the preferred transportation for 27% + 15% = 42% of the residents. 42% of 400 is 168 residents.
3. The line plot shows that the data is discrete and not continuous. Also, the data is not normally distributed and is skewed. Therefore, the range is not an appropriate measure of variability. The interquartile range (IQR) is a better measure of variability for skewed data. The IQR is the difference between the 75th percentile (Q3) and the 25th percentile (Q1) of the data.
From the plot, we can see that Q1 is 2 and Q3 is 8. Therefore, the IQR is 8 - 2 = 6.
Learn more about Interquartile Range here: https://brainly.com/question/1210750
#SPJ1
if a cube numbered 1 to 6 is tossed 300 times, about how many times would you predict the cube to land on a number greater than 4?
Answer: 100 times
Step-by-step explanation:
The cube is numbered 1 to 6. That is, 1, 2, 3, 4, 5, 6. That means there are 6 possible outcomes for each toss. But there are 2 outcomes we want, 5 and 6 (greater than 4).
So, for each toss, there is a probability of 2/6 = 1/3 that this will occur.
With 300 tosses, we can say that this will probably happen 300 times. This means that it will happen
1/3 * 300 times = 100 times.
Therefore, we can predict we will get a 5 or 6 about 100 times.
HELP AGAIN LOL
Subtract.
(8h + 7) - (7h + 6)
The simplified form of the expression (8h + 7) - (7h + 6) is h + 1. We subtract this by using the distributive law.
What is an expression?An expression is a combination of numbers, variables, and mathematical operations (such as addition, subtraction, multiplication, division, exponentiation, etc.) that represents a mathematical quantity or value. Expressions can be simple, consisting of just a single number or variable, or they can be complex, involving multiple numbers, variables, and operations.
What is distributive law?The distributive law, also known as the distributive property or distributive property of multiplication over addition, is a fundamental property of arithmetic and algebra that allows the distribution of a multiplication operation over an addition or subtraction operation.
The distributive law states that for any three numbers a, b, and c:
a × (b + c) = (a × b) + (a × c)
According to the given information:
To subtract (8h + 7) - (7h + 6), we can use the distributive property of multiplication over addition to simplify the expression.
(8h + 7) - (7h + 6)
= 8h + 7 - 7h - 6 (Applying the distributive property)
Now, we can combine like terms by adding or subtracting coefficients of the same variable:
= (8h - 7h) + (7 - 6) (Grouping-like terms)
= h + 1 (Simplifying)
So, the simplified form of the expression (8h + 7) - (7h + 6) is h + 1.
To know more about distributive property visit:https://brainly.com/question/6276874
#SPJ1
Enter the surface area of the figure
The surface area of the figure, given the diameter of the base and the height, would be 353.43 square millimeters.
How to find the area ?We can use the formula for the surface area of a cone:
Surface Area = πr² + πr√(r² + h²)
where r is the radius of the base and h is the height of the cone.
Since the diameter of the base is 9mm, the radius is half of that, or 4.5mm. The height of the cone is 20mm. Plugging these values into the formula, we get:
Surface Area = π(4.5)² + π(4.5)√(4.5² + 20²)
Surface Area = π(20.25) + π(4.5)√(436.25)
Surface Area = 353.43 millimeters²
Therefore, the surface area of the cone is approximately 353.43 square millimeters.
Find out more on surface area at https://brainly.com/question/27812847
#SPJ1
please help me IXL have to achieve a smart score of 80 part 1
The equation is linear and can be written in the slope intercept form as: y = -3x/5 + 6.
What is a linear equationA linear equation is an algebraic equation that represents a straight line on a graph. It can be written in the form y = mx + b, where x and y are variables, m is the slope of the line, and b is the y-intercept, which is the point where the line crosses the y-axis.
given the slope m = -3/5 and y intercept b = 6, we can write the equation as;
y = (-3/5)x + 6
y = -3x/5 + 6.
Therefore, the equation is linear and can be written in the slope intercept form as: y = -3x/5 + 6.
Read more about equation here:https://brainly.com/question/4074386
#SPJ1
In each graphic, the triangle was dilated to create the image triangle. Determine which scale factor was used for each dilation by dragging the correct scale factor to each graph.
pls help i well give brllant
The scale factor was used for each dilation are-
Part a: For ΔABC - scale factor = 2Part b: For ΔDEF - scale factor = 1/2Part c: For ΔGHJ - scale factor = 1/3Part d: For ΔKML - scale factor = 3Explain about the dilation:A transformation that changes the size of a figure is called a dilatation. This indicates that the preimage as well as image are similar and have been scaled up or down, respectively.
A dilatation that results in a reduction (imagine shrinking) or an enlargement (think stretching) produces a smaller or larger image, respectively.
Part a: For ΔABC
Length AB = 2 units
Length A'B' = 4 units
A'B' = 2 *AB
Thus, For ΔABC - scale factor = 2
Part b: For ΔDEF -
Length DF = 2 units
Length D'F' = 1 units
D'F' = 1/2 DF
Thus, For ΔDEF - scale factor = 1/2
Part c: For ΔGHJ -
Length GH = 3 units
Length G'H' = 1 units
G'H' = 1/3 GH
Thus, For ΔGHJ - scale factor = 1/3
Part d: For ΔKML -
Length KM = 2 units
Length K'M' = 6 units
K'M' = 3*KM
Thus, For ΔKML - scale factor = 3
Know more about the dilation
https://brainly.com/question/3457976
#SPJ1
What function is inverse of the exponential function y=(1. 5)^x
Answer:
[tex]y = {1.5}^{x} [/tex]
[tex] ln(y) = ln( {1.5}^{x} ) [/tex]
[tex] ln(y) = x ln(1.5) [/tex]
[tex]x = \frac{ ln(y) }{ ln(3) - ln(2) } [/tex]
[tex]y = \frac{ ln(x) }{ ln(3) - ln(2) } [/tex]
It cost Chile 17. 70$ to send 177 text messages. How much would it cost to send 97 text message
The total cost of sending 97 text messages is $9.70
How to find the unit cost?A unit cost is defined as the total expenditure incurred by a specific company to produce, store, and sell one unit of a specific product or service. Unit costs are also synonymous with cost of goods sold (COGS). This accounting measure also involves all of the fixed and variable costs associated with the production of a good or service.
Now, we are told that It cost Chile 17.70$ to send 177 text messages. Thus:
Unit cost of message = 17.70/177 = $0.1 per message
Thus:
Cost of 97 text messages = 97 * 0.1 = $9.7
Read more about Unit Cost at: https://brainly.com/question/30205161
#SPJ4
4. The usual 110-V household alternating current varies from -155 V
to 155 V with a frequency of 60 cycles/ sec (frequency is the
reciprocal of period). Assume the current starts at rest and then
rises.
Make a sketch of the curve.
Write an equation to describe the curve:_
Determine the value of y when t = 1/90 sec.:_
Approximate the value of t when y = 100 for the first time:_
Answer:
The equation for the alternating current can be described by: y = 155 sin(120πt)
Where y is the voltage in volts (V) and t is the time in seconds (s).
To find the value of y when t = 1/90 s:
y = 155 sin(120π(1/90))
y ≈ 30.8 V
To approximate the value of t when y = 100 V for the first time, we need to solve the equation for t:
100 = 155 sin(120πt)
sin(120πt) = 100/155
t = arcsin(100/155)/(120π)
t ≈ 0.001 s
Therefore, the value of t when y = 100 V for the first time is approximately 0.001 seconds
The rain gauge after a week showed that there were ten inches of rain. Every day the rain evaporated four inches but two more inches of rain was added. By what day was the rain gauge free of water?
A. day 11
B. day 10
C. day 8
D. day 7
Therefore, it takes four days for the rain gauge to be free of water. The answer is option D, day 7.
What is equation?In mathematics, an equation is a statement that asserts the equality of two expressions. An equation usually contains one or more variables, which are symbols that represent unknown or varying quantities. The values of the variables that satisfy the equation are called the solutions of the equation.
Here,
Let's start by finding out how much water is left in the gauge after one day of evaporation and addition. If the rain gauge had 10 inches of water at the start of the week, then after one day:
4 inches of water would have evaporated, leaving 10 - 4 = 6 inches of water.
2 more inches of rain would have fallen, bringing the total to 6 + 2 = 8 inches of water.
So after one day, the rain gauge has 8 inches of water.
Now we need to repeat this process until there is no water left in the gauge.
After the second day:
4 more inches of water would have evaporated, leaving 8 - 4 = 4 inches of water.
2 more inches of rain would have fallen, bringing the total to 4 + 2 = 6 inches of water.
After the third day:
4 more inches of water would have evaporated, leaving 6 - 4 = 2 inches of water.
2 more inches of rain would have fallen, bringing the total to 2 + 2 = 4 inches of water.
After the fourth day:
4 more inches of water would have evaporated, leaving 4 - 4 = 0 inches of water.
2 more inches of rain would have fallen, but it would not have filled the gauge since it was already empty.
To know more about equation,
https://brainly.com/question/28243079
#SPJ1
which of the following statements is true? group of answer choices in general, it is no more difficult to solve an integer programming model than a linear programming one. all of these answers. an integer programming solution is better than the linear programming solution to the same problem rounding does not necessarily provide feasible solutions and feasible solutions from rounding are not necessarily optimal.
The true statement is that An integer programming solution can be better than the linear programming solution to the same problem. So, option(b) is right one.
In integer linear programming is harder than linear programming, because the branch-and–bound method requires many iterations of the simplex method, integer programming problems, So, option(a) is false one.
It usually takes longer than linear programming problems of the same size.Integer programming is a mathematical method that produces numerical solutions to linear programming problems.In integer programming, obtained integer solutions that should be neither feasible nor optimal. So, option(c) is also false.Hence, required answer is option(b).
For more information about integer linear programming, visit :
https://brainly.com/question/31355426
#SPJ4
Complete question :
which of the following statements is true? group of answer choices
a) in general, it is no more difficult to solve an integer programming model than a linear programming one.
b) an integer programming solution is better than the linear programming solution to the same problem rounding does not necessarily.
c) provide feasible solutions and feasible solutions from rounding are not necessarily optimal.
d) all of these answers
Find the area of the shaded region for each composite figure.
The area of the shaded region is 192 m².
We have,
(g)
The shaded region.
= Area of the rectangle - Area of the triangle
So,
Length = 16 m
Width = 18 m
Area of the rectangle.
= 16 x 18
= 288 m²
And,
Base² + 16² = 20²
Base² = 400 - 256
Base = √144 = 12
So,
Area of the triangle.
= 1/2 x base x height
= 1/2 x 12 x 16
= 96
Now,
The shaded region.
= Area of the rectangle - Area of the triangle
= 288 - 96
= 192 m²
Thus,
The area of the shaded region is 192 m².
Learn more about rectangles here:
https://brainly.com/question/15019502
#SPJ1
Provide a detailed example. How lessons from Micah chapter 2 can be pacifically apply toward our lives today.
Chloe had 74 pennies and then lost 10. Now she wants to buy a treat that costs 5 eighths of the pennies she has left. How many pennies does the treat cost?
The cost of the treat would be 40 pennies.
In mathematics, an expression is a combination of symbols (such as numbers, variables, and operations) that represents a value.
Expressions can be as simple as a single number or variable, or they can be more complex, involving multiple operations and variables. They can also include functions, exponents, and other mathematical concepts.
Chloe started with 74 pennies and lost 10, so she has 74 - 10 = 64 pennies left. The treat costs 5/8 of her remaining pennies,
Calculate the cost by multiplying 5/8 by 64:
(5/8) x 64 = 40
Therefore, the treat costs 40 pennies.
To know more about an expression follow
https://brainly.com/question/29284683
#SPJ1