Summarize key
points from each
paragraph
READING Customer Service
Learning Seed: Communicating with Customers
What Makes Good Customer Service?
When you work in a retail store, what services are you offering? You
may think that your employer is paying you to prepare food, stock
shelves or tidy up the sales floor, but those aren't the real reasons.
Your employer is paying you to serve the needs of his or her
customers. Without good customer service, the customers would
disappear, and without customers, the business would fail. How you
treat the customers has a big impact on how well the store succeeds.
So what makes good customer service? The main ingredient is trying
to understand the customer. Understanding what a customer wants,
doesn't want, and how he or she wants to be treated are the keys to
having happy customers. There are many components to good
customer service, but in the end they all come down to the same goal:
understanding your customers.
Successful (And Not-So-Successful) Interactions What are the key points?

Answer:

The cemetery

Explanation:

Answer:

B.) CEMETERY

Explanation:

Have a nice day!

When an axle is exerted, the force on the system decreases while the torque on the axle increases as a result of the effort, which results in

In science, what exactly is a force?

In science, "force" refers to a certain concept. It is quite acceptable to refer to a force of this level as a push or a pull. It's incorrect to say that an object "has in it" or "contains" a force. A force is experienced by one thing from another. The concept of a force makes no distinction between living creatures and inanimate objects. Force is defined as a push or pull that causes the body it is acting on to accelerate. The unit of force in the SI is the Newton.

Know more about increases Visit:

https://brainly.com/question/9895771

#SPJ1

Answer: The term wireless describe telecommunications in which electromagnetic waves carry a signal over a network.

The operation of wireless devices in a home or office that provide reliability for businesses computer user is  wireless LAN (local area networks). in this a wireless LAN adapter is fitted in the personal computers.

Wire ferrules is the conducting element

between the two ferrules

An electric wire ferrules are metal tubes which are usually crimped over stranded wire to secure the strands within a screw terminal.

The three major types of wire ferrules are as follows:

In conclusion, wires ferrules is the conducting element between the two ferrules

Learn more about metallic wire elements:

https://brainly.com/question/9222909

#SPJ1

Answer:

1) The speed of the roller coaster at the bottom is approximately 15.65 m/s

2) The acceleration of the roller coaster at the bottom is 6·g's

3) The high acceleration is 6 times the force of the weight of the  passengers

The high acceleration can cause gravity induced loss of consciousness

4) Please find attached a force diagram of the forces at the bottom of the roller coaster created with Microsoft Visio

5) For the acceleration at the bottom to be 2·g's the radius of the rollercoaster at the bottom should be 25 meters

5) The radius at the bottom of roller coasters are increased to reduce the normal force felt by the passengers as they pass the bottom of a circular roller coaster

Explanation:

1) The given parameters are;

The radius of the roller coaster, r = 5.0 m

The speed of the roller coaster = Minimum = 0 m/s

The shape of the roller coaster's path = Circular loop

Therefore, the maximum height of the roller coaster, h = The diameter of the of a circular path of the roller coaster, d = 2 × r = 2 × 5.0 m = 10.0 m

∴ h = 10.0 m

The minimum speed is f=given by the following equation;

[tex]F_N = \dfrac{m \cdot v^2}{R} - m \cdot g = 0 \ (At \ the \ top \ of \ the \ roller \ coaster's \ path)[/tex]

Therefore, we have;

[tex]\dfrac{m \cdot v^2}{R} = m \cdot g[/tex]

From which we have;

v = √(R × g)

Where;

R = The radius of the path of the roller coaster = 5.0 m

g = The acceleration due to gravity = 9.8 m/s² = constant

By plugging in the values of the variable, 'R', and the constant, 'g', we get;

v = √(5.0 m × 9.8 m/s²) = 7 m/s

The minimum speed of the roller coaster, v = 7 m/s

The speed of the roller coaster at the bottom is given by the conservation of energy formula as follows;

The energy at the top of the roller coaster = The energy at the bottom of the roller coaster

∴ The total mechanical energy of the roller coaster, M.E., is constant and at the top, [tex]M.E._{top}[/tex], is given as follows;

[tex]M.E._{top}[/tex] = 1/2·m·v₁² + m·g·h₁

At the bottom, the total mechanical energy is given as follows;

[tex]M.E._{bottom}[/tex] = 1/2·m·v₂² + m·g·h₂

Where;

v₁ = The velocity of the roller coaster at the top = 7 m/s

h₁ = The height of the roller coaster at the top = 10 m

v₂ = The speed of the roller coaster at the bottom

h₂ = The height of the roller coaster at the bottom = 0 m

g = The acceleration due to gravity = 9.8 m/s² = Constant

By plugging in the values, we get;

M.E. = [tex]M.E._{top}[/tex] = [tex]M.E._{bottom}[/tex]

∴ 1/2·m·v₁² + m·g·h₁ = 1/2·m·v₂² + m·g·h₂

1/2 × (7 m/s)² + 9.8 m/s² × 10.0 m = 1/2 × v₂² + 9.8 m/s² × 0 m

122.5 m²/s² =  1/2 × v₂²

∴ v₂² = 2 × 122.5 m²/s² = 245 m²/s²

v₂ = √(245 m²/s²) = 7·√5 m/s ≈ 15.65 m/s

The speed of the roller coaster at the bottom, v₂ ≈ 15.65 m/s

2) The normal force on the car at the bottom of the roller coaster is given as follows;

[tex]F_N = \dfrac{m \cdot v_2^2}{R} + m \cdot g = m \times \left(\dfrac{ v_2^2}{R} + g \right )[/tex]

Force, F = Mass, m × Acceleration, a

∴ F = m×a

Therefore, the acceleration at the bottom, 'a' by comparison of the general equation for force, 'F', and the normal force, [tex]F_N[/tex], is given as follows;

[tex]a = \left(\dfrac{ v_2^2}{R} + g \right )[/tex]

Plugging in the values for 'v₂²', 'R', ang 'g', gives;

[tex]a = \left(\dfrac{ v_2^2}{R} + g \right ) = \left(\dfrac{ 245}{5} + 9.8 \right ) = \left(49+ 9.8 \right ) = (5 + 1) \times 9.8 = 6 \times 9.8 = 6 \times g[/tex]

a = 6·g = 58.8 m/s²

3) The high acceleration will lead to a very high normal force (equal to 6 times each of their weight) experienced by the passengers with a force

The high acceleration is dangerous and can lead to gravity induced loss of consciousness since it is more than 3·g's

4) Please find attached the force diagram at the bottom of the roller coaster created with Microsoft Visio

5) For the acceleration at the bottom to be 2·g's, we have;

[tex]a = \left(\dfrac{ v_2^2}{R} + g \right )[/tex]

At a = 2·g, we have;

[tex]2 \cdot g = \left(\dfrac{ v_2^2}{R} + g \right )[/tex]

[tex]\therefore 2 \cdot g - g = g = \dfrac{ v_2^2}{R}[/tex]

[tex]R = \dfrac{ v_2^2}{g} = \dfrac{245}{9.8} = 25[/tex]

R = 25 m

The radius at the bottom of the roller coaster should be 25 meters so that only 2·g's is felt

5) The shape of the roller coaster has an increases the radius at the bottom so as to reduce the acceleration of the car

Answer:

D

Explanation:

Both the joule and the kelvin represent heat. Kelvin is a unit of measurement for temperature and joule is more heat energy.

Answer:

Joules

Explanation:

It's heat

The duties of school principal are those responsibilities or obligation he must carry out for proper management of the school. Some of the duties are as follows:

School administration can simply be defined as process which involves the management of all the school operations and activities.

Learn more about school administration:

https://brainly.com/question/24243635

#SPJ1

Answer:

what happend??

Explanation:

The Article of the NEC that describes the proper placement of outlets in rooms is the Article 210.

NEC is the short or acronym for National Electric Code.

For example, with regard to Receptacles, section (210-21(b)) of the Article 100 indicates that a "Receptacle" is a contact device provided at an outlet for the connecting of an attachment plug.

The terms "receptacle" and "receptacles" occur often in the National Electrical Code (NEC).

Learn more about NEC at;
https://brainly.com/question/14507799
#SPJ1

The  purpose of a block to add a value to the end of an array.

The push() is known to be often used to add an element to the end of your array.

The end() function is known to be one that transmit the internal pointer to, and also the outputs, the last factor in the array.

A null or zero value is known to be that which marks the end of an array and it is said to be the very equivalent of the null char for any kind of string

Hence, in the above scenario, The  purpose of a block to add a value to the end of an array.

Therefore, option D is correct.

Learn more about  array from

https://brainly.com/question/24275089

#SPJ1

Answer: The answers is C. To change a value at a certain index

I just took the test

Answer:

The main cables of the Golden Gate Bridge are made of numerous smaller cables because by combining several thousand in number of smaller cables, each having a diameter which is approximately the diameter of a pencil, into the required cable diameter dimensions, the flexibility, strength, resistance to cracking, rotation resistance, crushing resistance and fatigue resistance of the main cables are increased, and failure of a few strands in a multi-stranded cable is more likely to be detected before catastrophic failure takes place than in a single cable

The properties of strength and flexibility that the cable provides are required so that the bridge can better cushion the seismic turbulence of the water and strong wind energy at the bay of San Francisco, the location of the bridge

Explanation:

Answer:

confusing, but yes

Explanation:

your shirt is over you pants I believe.

Answer:

A wiring system is a network of wires that links various accessories for the distribution of electrical energy from the supplier metre board to a number of electrical energy-consuming devices.

Winding the linear object on a particular workpiece is the automatic wire coiling machine's primary task. The automatic wire coiling equipment is more widely used in daily life and by numerous manufacturers.

A wiring system is a network of wires that connects various accessories for the distribution of electrical energy from the supplier metre board to a range of electrical energy-consuming devices including lamps, fans, and other household appliances via regulating and safety devices.

It is also known as a pull drawing machine while drawing wire. The production of machinery, the processing of metals, petrochemicals, the manufacture of plastics, bamboo and wood products, wire and cable, and other industries all use wire drawing machines, which are common mechanical devices used in industrial applications.

To learn more about wiring machine refer to:

https://brainly.com/question/2587643

#SPJ1

Answer:

6--b

7--a

8--c

9--f

10--d

Explanation:

6. Miter saw/circular blade with perimeter teeth (b.wood/metal sheet)

7. Miter saw/circular blade with 60+ teeth. (a.ceramic tile)

8. Circular saw/circular blade with abrasive. (c. fine cuts on expensive molding)

9. Reciprocating saw/straight blade, bimetal. (f. solid metal)

10. Circular saw/circular blade with grinding edge, dry. (d. demolition having old nails)

A circular saw is a type of cutting tool in the form of a chainsaw with a round and serrated saw blade. With this type of saw, cutting wood becomes easier. Not only that, Circular Saw is also often chosen because of the practicality of its use. In addition, this circular saw is also very practical to remove. So if the saw blade is dull, then you can easily remove it to be sharpened again, or replaced with a new one.

Learn more about circular saw at

https://brainly.com/question/17157503

#SPJ1

If an electric dryer has a nameplate rating of 5.6kva, Kilovolt-amperes (kVA)  is often used for the service calculation.

A service calculation is known to be the NEC given way or procedure that is used for sizing service conductors, service equipment, and others so that they can be able to meet the needed electrical demands of a home and office

Note that for a person to calculate dryer load, the use of Kilovolt-amperes (kVA) is often considered as it is equivalent to kilowatts (kW).

Hence, If an electric dryer has a nameplate rating of 5.6kva, Kilovolt-amperes (kVA)  is often used for the service calculation.

Learn more about electric dryer from

https://brainly.com/question/4997920

#SPJ1

Answer:

S2 = 60 RPM.

Explanation:

Given the following data;

Gear ratio = 40/24 (T2 = 40 and T1 = 24).

Speed of driving gear = 100 RPM

To find the speed of the driven gear;

Mathematically, gear ratio in terms of speed (RPM) is given by this formula;

[tex] S_{1} * T_{1} = S_{2} * T_{2} [/tex]

Where;

Substituting into the equation, we have;

[tex] 100 * 24 = S_{2} * 40[/tex]

[tex] 2400 = 40S_{2} [/tex]

[tex] S2 = \frac {2400}{40} [/tex]

S2 = 60 RPM.

Therefore, the speed of the driven gear is 60 revolutions per minute.

Answer:

B or C

Explanation:

Commercial has to be for things like political  and industrial is for making/providing things

Answer:

Lost productivity

Answer:

The correct option is;

D. Electric meter

Explanation:

An electric meter is a metering device that is used for the measurement of the electric power consumption of an electrical powered tools, a living space or a building

Electric meter readings are used by electric utility company to sell electric power to consumers at a given rate such that it allows the electric utility company to receive payment for the total power supplied, and for the consumer to regulate the amount of power consumed

The electric meters are usually calibrated in kilowatt hour (kWh) and prepaid meter displays the amount of units of power bought, while post paid meters are usually read once each billing period which is usually one month.

Answer:

technician B

Explanation:

because adding leaves increasing capacity

Answer:

I. Inclined plane: GPE to KE.

II. Screw: KE to GPE.

III. Wheel and axle: GPE to KE.

IV. Lever: GPE to KE.

V. Wedge: GPE to KE.

VI. Pulley: GPE to KE.

Explanation:

A simple machine can be defined as a type of machine with no moving parts but can be used to perform work.

Basically, a simple machine allows for the transformation of energy into work. The six simple machines are;

I. Inclined plane: gravitational potential energy to mechanical energy (kinetic energy). It is set at an angle and then used to lift an object.

II. Screw: kinetic energy to potential energy. It is held in position and then used to tighten two or more objects together.

III. Wheel and axle: gravitational potential energy to mechanical energy (kinetic energy). It comprises of two circular objects which aids in the motion of an object such as a car.

IV. Lever: gravitational potential energy to mechanical energy (kinetic energy). It comprises of a pivoted bar at a fixed point (fulcrum) that allows it to be used for lifting heavy objects.

V. Wedge: gravitational potential energy to mechanical energy (kinetic energy). It can be used to split objects into halves.

VI. Pulley: gravitational potential energy to mechanical energy (kinetic energy). It is made up of a wheel and rope which allows force to be multiplied such as in a drawing well.

Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;

a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.

b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.

Answer:

  16

Explanation:

The product of feet and pounds is the torque. 18 inches is 1.5 feet.

  (1.5 ft)(x lbs) = 24 ft·lbs

  x lbs = (24 ft·lbs)/(1.5 ft) = 16 lbs

The force will be 16 pounds applied to an 18-inch wrench to obtain 24 ft·lbs.

Answer:

16

Explanation:

Answer:

Electrons are the negatively charged particles of atom. Electrons are extremely small compared to all of the other parts of the atom. So, the negative green particles of this atom are the electrons.

Explanation:

Hope it helps:)

The relationship between weather conditions, human-perception time, vehicle-reaction time, and dangerous traffic situations is known to be one that is interwoven as one cannot do without the other.

A lot of factors have been seen to affect reaction times, such as age, gender, physical fitness and others.

Hence, The relationship between weather conditions, human-perception time, vehicle-reaction time, and dangerous traffic situations is known to be one that is interwoven as one cannot do without the other.

The  driver need to be sensitive to make sure he or she is prepared to allow for such situations.

Learn more about weather conditions from

https://brainly.com/question/17922964

#SPJ1

Answer:

Its B).  The efficiency rating of the dishwasher was significantly improved, meaning it would save him money and be more eco-friendly.

Explanation:

On EDG

Answer:

It's B) i just did it in edg

Explanation:

Answer:

A. engineering design process

Explanation:

We are told that John is trying to develop a handheld camera. And that it is unlike any other one that has been developed before.

Now, though he understands what the final product will look like, the camera still required further development and modification. This is simply an engineering design process because it involves finding a need and trying to solve it since he already understands what the final product will be.

Answer:

I would go with when acid and a base react quantitatively with each other. as my answer for that