Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March):

Molding Fabrication Total
Estimated total machine-hours used 2,500 1,500 4,000
Estimated total fixed manufacturing overhead $ 10,000 $ 15,000 $ 25,000
Estimated variable manufacturing overhead per machine-hour $ 1.40 $ 2.20

Job P Job Q
Direct materials $ 13,000 $ 8,000
Direct labor cost $ 21,000 $ 7,500
Actual machine-hours used:
Molding 1,700 800
Fabrication 600 900
Total 2,300 1,700

Sweeten Company had no underapplied or overapplied manufacturing overhead costs during the month.

Required:
For questions 1 to 9, assume that Sweeten Company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments and Job P included 20 units and Job Q included 30 units. For questions 10 to 15, assume that the company uses a plantwide predetermined overhead rate with machine-hours as the allocation base.
1. What were the company’s predetermined overhead rates in the Molding Department and the Fabrication Department? (Round your answers to 2 decimal places.)

Molding department
Fabrication department

Answer:

The electronic engineer who is known for leading the team that created the first commercial video game cartridge is Jerry Lawson. He led the engineering team that developed the Fairchild Channel F, which was released in 1976 and is considered to be the first video game console with interchangeable cartridges.

Welding transformer with multiple coils is called a multi-coil, or multi-winding transformer.

A welding device known as an inverter welder uses solid-state electronic components to increase the efficiency of the conversion of electric current. Converter welding devices are compact, lightweight, and frequently smaller than a lunchbox. Moreover, inverter-based welders frequently have a large number of digital arc adjustability.

The transformer, which is situated inside a machine, is used to transform the high-voltage input, also known as primary power, from of the wall plug. This voltage ranges typically between 208 and 600 voltages, with a moderate alternating (AC) of between 15 and 55 amps.

To know more about  transformer visit:

https://brainly.com/question/16971499

#SPJ4

To fly in Class C airspace, no special pilot licence is needed.

A individual who uses an airplane's directional flying instruments is known as an aviation pilot or aviator. Due to their involvement in running the aircraft's guidance and engine systems, some other members of the aircrew, such as navigators as well as flight crew, are also regarded as aviators.

The optimal length of time to train as a pilot is 3–4 years to earn a bachelor of science in commercial flight. It is better to wait until you reach at least 18 years old to start your journey because getting a degree is great for regularity of training.

To know more about Pilot visit:

https://brainly.com/question/27961960

#SPJ4

1) ParrotID

2) EmployeeID

3) DependentID

4) ShipID

5) MissionID

Note: each table has one primary key.]

To independently identify records in a table, primary keys are used. EmployeeID is unique to each employee, including captions and crew. In Table Captain, employeeID will become a foreign key because it serves as a primary key in Table Employee.

Since Captain has a parrot, parrotID can be used to uniquely identify records in the Captain table.

EmployeeID is unique for all employees, including captains and crew, so this will be used as the primary key to uniquely identify a record.

Here, employeeID will be a foreign key because it serves as a primary key in table employee. Since it is mentioned that only the crew members have dependents, dependentID will serve as a primary key to uniquely identify a record in table Crew.

To put it in a simple term, ShipID serves as a primary key because it is unique for every ship and thus uniquely identifies a record.

Since it is a given that each mission has a unique number, missionID serves as the primary key.

note: ShipID serves as a foreign key constraint in the ShipMissions table.

Read more about database here:

https://brainly.com/question/518894

#SPJ1

Sawmills and producers of timber and lumber products use the board foot as a unit of measurement to precisely determine how much wood may be removed from a log or plank.

This computation can be used to solve engineering issues involving mass and heat transport. A text file called a "server log" keeps track of all activity involving a particular server over a given period of time.

The actual computer which a server programme runs on in a data centre is also usually referred as a servers.

For instance, a Web server just on World Wide Web is indeed a computer that utilises using HTTP protocol to transfer Web content to a browser in response to a client request.

To know more about log visit :

https://brainly.com/question/28596588

#SPJ4

With a value of 1, this code will print the value of x three times.

# Two-argument example for I in the range (-1, 5) print(i, end=", "), ") # of prints: -1, 0, 1, 2, 3, 4, The increment between the numbers in the range is controlled by the optional step value. Step is always set to 1.

The binary value of 0.2 is similarly recorded as 0.001100110. Today, Python (or some other programming language) transforms 0.1 and 0.2 to its binary form when you add 0.1 + 0.2. The addition is then carried out. The outcome will never exactly equal 0.3.

To know more about code visit:-

https://brainly.com/question/25611043

#SPJ4

When you are a novice driver practicing right or left turns in typical traffic, you shouldn't travel faster than 5 to 15 mph.

Start from the right lane if you are making a right turn. If you are turning onto a highway with more than one lane traveling in the direction you want to go, enter the lane that is the closest to where you want to go.

Even if approaching traffic is turning left into the same road as you when you make a right turn from a main road into a minor road, you still need to yield to them.

To know more about novice driver visit:-

https://brainly.com/question/28237872

#SPJ4

When a door is opened to a 90-degree angle, the amount of clear space required between the face of the door and the opposite stop or surface is referred to as ADA door clearance.

Aisles must be at least 60 inches wide to allow room for passing other customers and at least 36 inches wide if they are longer than 200 feet. Keep an eye out for aisle displays and provide adequate room to pass around them. When placing any kind of furniture or objects in an open area, you still need to make sure that there is a lane of travel that is at least 36 inches wide throughout the area, according to Stein. 30 x 48 inches of clean floor space must be available to fit a single stationary wheelchair and its occupant (760 mm by 1220 mm). The wheelchair-accessible minimum floor or ground space may be positioned for forward.

To Know more about Clearance Visit:

brainly.com/question/30034723

#SPJ4

The materials which are possible candidates are brass, stainless steel, aluminum and copper is to be subjected to a tensile load.

Tensile load, also known as tension, is a force applied to an object in order to extend, deform, or disrupt the object. Tensile load is the opposite of compressive load, which compresses or squeezes an object. Tensile load is often used in engineering and material science to measure the strength of a material or object. When a material is subjected to a tensile load, it will stretch and deform until it reaches its breaking point. The amount of force it takes to cause the material to reach its breaking point is known as the tensile strength of the material.

To learn more about tensile load

https://brainly.com/question/13390710

#SPJ1

The diagonal ad's typical strain average is 0.0168.

It describes the relationship between the object's initial length and its length change instead and is a dimensionless feature. For instance, a normal strain measurement of +/- 0.1 indicates that an object's length has either increased by 10% (tensile) or dropped by 10% (compressive) (compressive).

eBook on mechanics: Normal Strain. The Greek letter stands for strain, which is a phrase used to describe the extension or distortion of a body when it is subjected to a force or collection of forces. In general, the strain of a body is calculated as the length change divided by the beginning length.

To know more about strain visit:-

https://brainly.com/question/17156378

#SPJ1

An air-cooled condensing unit is an important component of an air conditioning system. The following are three criteria for a good location for an air-cooled condensing unit: Adequate Airflow,  Level Ground, and Protection from the Elements.

1. Adequate Airflow: An air-cooled condensing unit requires adequate airflow to function properly. The unit must be placed in an area where there is enough space for air to flow around it. This allows the unit to expel the heat it has absorbed from the indoor space. Therefore, the location should be free of any obstructions that can restrict the airflow, such as walls or vegetation.

2. Level Ground: The condensing unit should be installed on level ground. This is because the compressor and other components inside the unit are sensitive to vibrations, and they can become damaged if the unit is not level. A level surface also ensures that the refrigerant flows evenly through the system, which is important for optimal performance.

3. Protection from the Elements: The location of the condensing unit should provide protection from the elements. Exposure to harsh weather conditions can damage the unit and reduce its lifespan. Rain, snow, and direct sunlight can all cause problems, so it's best to install the unit in a protected area, such as under an overhang or in a shaded spot.

To learn more about air-cooled condensing, click here:

https://brainly.com/question/11823314

#SPJ4

Blistered paint is indeed a symptom of exposure to heat on a ladder, so the answer, based on the facts provided in the question, is yes.

A rivet is a particular kind of physical fastener that is used to permanently join or assemble parts using special installation techniques. It comprises of a head linked to a smooth cylindrical body at one end; the head's diameter is greater than the shaft's.

Rivets provide significantly better hold than screws. They won't shake loose and are impossible to open. This is so that the rivet supports both sides, whereas the screw has only a head on one.

To know more about rivets visit:

https://brainly.com/question/27880700

#SPJ1

The type of tool you use to install (or remove) the screw heads is referred to as the drive style, or drive recess. The most typical of the numerous that exist.

The type of tool you use to install (or remove) the screw is referred to as the drive style, or drive recess. The most popular types of fasteners among the many that are available are: slotted, Phillips, combination (both slotted and Phillips), hex, hex socket, square and spanner.

The slotted type of screw drive, the first of its kind to be created, is still the most extensively used screw drive because it is straightforward, affordable, and efficient. There is only one line that runs through the entire design, which gives it its center of the head, where a flat-bladed screwdriver can be inserted.

To know more about screw heads visit:-

https://brainly.com/question/28030363

#SPJ4

Your dryer's heating element, which consists of a metal chamber enclosing a coil of heating wire, will be present if it is electric. In the same way that electricity heats the wire, hot air also heats the chamber.

The cycle will still finish and the dryer will spin if the heating element isn't functioning properly, but it won't become hot enough to help dry the clothing. It is natural for heating elements to degrade with time.

They are used in conventional heating appliances like toasters and hair dryers, industrial furnaces for heating, floors, roofs, pathways for melting snow, dryers, etc.

To know more about heating element visit :-

https://brainly.com/question/29526412

#SPJ4

A parking facility for a medical facility, such as a hospital or nursing home, may require a higher number of accessible spaces than other commercial spaces.

Commercial spaces are properties used for business activities. These properties may be rented or owned and can include buildings, warehouses, offices, and other types of storefronts. They are often located in commercial or industrial areas, or in areas with high foot traffic, in order to maximize visibility and potential customers. Commercial spaces are often equipped with the necessary technology and infrastructure to support the businesses that occupy them. Commercial spaces are essential for businesses to thrive and are used to conduct day-to-day operations.

To learn more about commercial spaces

https://brainly.com/question/29705240

#SPJ4

It seems unlikely that opening the dampers on the other hoods more will significantly enhance the airflow in the one that is operating at less than 10 ft/sec if they are already barely over that speed.

During chemical manipulations, fume hoods are specifically made to provide ventilation for the safety of lab users. They produce a lot more airflow than is necessary for storage.

Always work at least 6 inches inside the fume hood's aperture. Don't alter the fume hood. Don't block off the baffle exhaust.

To know more about airflow  visit:-

https://brainly.com/question/28346881

#SPJ1

1.) Use of sealants—seals the connections between building components. To prevent the infiltration of moisture, air, or other corrosive particles, the joints are sealed. Sealant is a substance that adheres to joint surfaces and hardens into a firm rubbery substance.

2.) The use of prefab coverings, which are often metal and designed to accommodate the joint's anticipated movement. Despite the joints' ability to move, the materials' integrity during assembly should be guaranteed.

Joint sealants play a significant role in the protection of modern commercial facilities against water damage to structures and their contents. While many commercial designs use water-shedding features like lap siding, overlapping flashings, and sloped roofs, many residential structures do not; as a result, there is little to no protection against leaking if a joint sealant fails.

Regrettably, there are several instances during the design and construction process in today's building environment where the poor judgment or inappropriate behavior leads to sealant failure.

For aesthetic and cleanability reasons (on interior surfaces where water resistance is not a concern) as well as to stop sound from traveling through cracks, open joints are sealed using joint sealants (usually interior and internal to composite assemblies).

To know more about sealants:

brainly.com/question/14413264

#SPJ4

False . An individual gadget known as a computer is capable of carrying out many activities for its users. Every program is typically kept in ROM, and as they are used, they are loaded into RAM.

A microprocessor's instruction set is distinct and often only understood by other microprocessors of the same brand. Computer systems consist of a computer, as well as extra hardware and software. Central processing unit (CPU), memory, input/output, and storage devices are the four main components of a computer system. To produce the intended result, all of these parts operate in concert as a single unit. The term "program" refers to a collection of guidelines that a computer follows to carry out a task. In general, "software" is used to describe the well-developed programs;

Learn more about users here:

https://brainly.com/question/30175564

#SPJ4

The location the type of electrical hardware to be utilized in a home, including meter, transmission panel box, outlets, switch, and other electrical features, are shown on the electricity plan.

Electrical devices can be connected to the electricity grid using electrical outlets, also known as electrical outlets, plugs, and wall plugs. The outlet receives alternating power from the power grid. Industrial and residential outlets are the two main categories.

Appliances can be put into electrical sockets or outlets to be connected towards the power grid and given power so they can work. Electric shocks, burns, and fires can all be caused by lightning.

To know more about electrical outlet visit:

https://brainly.com/question/8309417

#SPJ4

What drove the people of Prehistoric Jericho to build fortress walls Defend against marauding nomads.

What are some prehistoric examples?

The Neolithic Revolution, Neanderthals and Denisovans, Stonehenge, the Ice Age, and other events are all part of prehistory, the vast span of time before written records or human recordkeeping.

The Paleolithic Age is the Stone Age's earliest and longest epoch. This is derived from the Greek words palaios, which means "long ago" or "old," and lithos, which means "stone" – when combined, Paleolithic Era means Old Stone Age. This is what our ancestors may have looked like over three million years ago.

Know more about fortress walls Visit:

https://brainly.com/question/27587706

#SPJ4

The demarc is located ​in the Main Distribution Frame (MDF). The correct option is D.

What is Main Distribution Frame (MDF)?

In telephony, a Main Distribution Frame (MDF) is a signal distribution frame or cable rack that connects and organizes telecommunication wiring between itself and any number of intermediate distribution frames and cabling from the telephony network it serves.

A communications facility's internal equipment is connected to wires and subscriber carrier equipment by the MDF. Each cable used to serve user telephone lines arrives at an MDF where it is distributed to local exchange equipment.

In comparison to a patch panel, an MDF can offer greater freedom when allocating telecommunications facilities at a lower cost. The most typical type of MDF is a lengthy, two-sided steel board.

Learn more about Main Distribution Frame:

https://brainly.com/question/28167078

#SPJ4

The TWO alternatives would be Genuine hallmarks of "democratic" forms of government: equal opportunity and free and open elections.

The two types of democracy that are most prevalent now are representative democracy and indirect democracy. When citizens choose representatives to enact laws on their behalf, this is known as indirect democracy or representative democracy.

A representative democracy that upholds the rule of law and protects people's rights to their property is referred to as a liberal democracy. The ability of elected representatives to rule however they choose is weakly or not at all constrained in an illiberal democracy.

To know more about democratic visit:-

https://brainly.com/question/30189685

#SPJ1

The force on the element will be 2452.5 Newton and 3468.4N.

Force is a physical concept that describes the influence that one object exerts on another. It can cause a change in the motion or shape of an object. Force is typically measured in units of Newtons (N) and is represented as a vector quantity, meaning it has both magnitude and direction.

According to Newton's laws of motion, an object will remain at rest or in uniform motion in a straight line unless acted upon by a net external force. Force can be exerted through a variety of means, including through contact, such as pushing or pulling, or through non-contact means, such as gravity or electromagnetic fields.

ΣFy =0

N₂ sin 45° = W

N₂ 250×9.81/ sin 45°

N2 =3468.4N

N1 = N₂ cos 45°

N1 = 2452.5 N

Learn more about force on

https://brainly.com/question/12785175

#SPJ1

An online application known as a CSE citation generator produces citations using the Council of Science Editors (CSE) citation style.

This is accomplished automatically by entering a document identifier, such as a website URL, book ISBN, or journal DOI, and correctly formatting the citation using the remaining information.

The Council of Science Editors, a nonprofit organization, developed the CSE citation format. The CSE Scientific Style and Format Manual, which is now in its eighth edition, is where the CSE style rules are published.

The CSE style has three different ways to properly reference sources. They shouldn't be together (format all citations the same way).

The author's name and year of publication are enclosed in parenthesis and placed next to the referenced text as an in-text citation, also known as author-date or name-year. The author's last name is used to sort the reference list at the conclusion of the article.

To know more about CSE:

brainly.com/question/30404187

#SPJ4

Give tough feedback supportively and be willing to be more vulnerable. As a full-time chief scrum master for a Scaled Agile Framework, a release train engineer (RTE) monitors risks, promotes continuous development, resolves obstacles, and facilitates program-level processes and execution (SAFe).

The Agile Release Train's servant leader and coach is the Release Train Engineer (RTE) (ART). The main duties of the RTE are to help the teams deliver value and to facilitate ART events and processes. RTEs interact with stakeholders, deal with obstacles, assist with risk management, and promote constant improvement.

While being made up of self-organizing and self-managing teams, Agile Release Trains (ARTs) do not automatically drive or direct. The release train engineer is in charge of that; they lead most successfully when they are serving others.

release train engineers comprehend the special chances and obstacles involved with enabling and continuously aligning a sizable development program, and they have a firm grip on how to scale Lean and Agile approaches.

To know more about release train engineers:

brainly.com/question/17458064

#SPJ4

A accurate orienteering compass has these features: Clear base plate that approves you to see the map underneath. Straight aspects for aligning two factors or for drawing lines. Liquid-filled needle housing that keeps the magnetic needle incredibly consistent when taking readings.

A compass should have all the facets of a accurate orienteering compass. It should be water resistant and have a liquid-filled needle case. It have to additionally have an adjustable needle. There are many one of a kind types of orienteering compasses, so it's crucial to lookup the exceptional one before you buy.

ANSWERS: Orienteering Arrow.

Base Plate. Compass Dial.

Magnetic Needle. Orienteering Lines.

Ruler. Direction of Travel Arrow.

Learn more about good orienteering compasses here;

https://brainly.com/question/29605607

#SPJ4

Purchasing a competitor's product and examining its design elements is known as reverse engineering.

Reverse engineering is a method that examines or recreates a product's design using a physical component as a starting point. Clay models and various kinds of prototypes will be created as part of the design process for a new product in order to test, assess, and validate the conceptual design.

Reverse engineering is the process of figuring out the design and technology utilised to create an end product by working backwards from it. The project owner can duplicate or improve the product using the data gained from this procedure, or they can apply to the development of a complementary product.

To know more about reverse engineering visit:-

https://brainly.com/question/13195746

#SPJ1

Answer: A

Explanation:

When a thermostat is satisfied, it will open.

thermostat: a device that monitors temperature fluctuations with the aim of keeping an enclosed space's temperature essentially constant. When the temperature rises or falls above or below the desired level in a system that also includes relays, valves, switches, etc., the thermostat generates signals typically electrical ones.

The thermostat shows the ambient temperature and uses this data to turn on and off your HVAC system. Its objective is to regulate the system so that, when you adjust the temperature inside your home, it does so with just the right amount of warm or chilly air.

To know more about thermostat visit:-

https://brainly.com/question/27269379

#SPJ4

A thermostat will open when it is satisfied. Thus, the correct word for the blank is open.

Thermostat: a device that monitors temperature fluctuations with the aim of keeping an enclosed space's temperature essentially constant. When the temperature rises or falls above or below the desired level in a system that also includes relays, valves, switches, etc., the thermostat generates signals typically electrical ones.

The thermostat shows the ambient temperature and uses this data to turn on and off your HVAC system. Its objective is to regulate the system so that, when you adjust the temperature inside your home, it does so with just the right amount of warm or chilly air.

To know more about thermostat visit:-

brainly.com/question/27269379

#SPJ4

Rather of using fillet radii, chamfered and sharp edges are preferred when constructing inside corners on milled and turned items. Cutting speed and tool life have a linear connection when determining useful tool life.

What does chamfered mean in terms of edges?

The sloped or angled edges or corners of a part design are known as chamfers. It is the fillet's opposite. A chamfer is sharply angled and straight, as opposed to being curved. Mechanical engineering and manufacturing both frequently use this phrase. The middle French word chamfrein, which is related to the bevelled edge, is where the word chamfer originated. To put it in much simpler terms, a bevel is an edge that is sloped, and a chamfer is an edge that is a bevelled edge that joins two surfaces. This includes creating an angled cut along the edge of a piece of material. The word "bevel" has been applied there as an adjective.

Know more about engineering Visit:

https://brainly.com/question/14094488

#SPJ4