Answer: If it is just subtraction (I am not sure, it would be 0.69
Step-by-step explanation:
4.73-4.04=.69
again not sure what exactly is being asked here so ill take what i see
If the nth partial sum of a series Σ from n=1 that goes to infinity of an is sn=(n-1)/(n+1), find an and Σ an as it goes to [infinity].
the sum of the series Σ an is:
Σ an = Σ [1 - 3/(n+2)] = Σ 1 - Σ 3/(n+2) = ∞ - 1 = ∞. the sum of the series diverges to infinity.
To find the value of an, we can use the formula for the nth partial sum and its relation to the (n+1)th partial sum:
sn = a1 + a2 + ... + an
sn+1 = a1 + a2 + ... + an + an+1 = sn + an+1
Subtracting sn from sn+1, we get:
an+1 = sn+1 - sn
Using the given formula for sn, we get:
an+1 = [(n+1)-1]/[(n+1)+1] - [(n-1)+1]/[(n-1)+1]
an+1 = (n-1)/(n+2)
Therefore, the nth term of the series is:
an = (n-1)/(n+2)
To find the sum of the series, we can use the formula for the sum of an infinite geometric series:
S = a1 / (1 - r)
where a1 is the first term and r is the common ratio. However, this series is not a geometric series, so we need to use another method to find its sum.
One way to do this is to use partial fractions to express the series as a telescoping sum. We can write:
an = (n-1)/(n+2) = (n+2 - 3)/(n+2) = 1 - 3/(n+2)
Then, the sum of the series can be expressed as:
Σ an = Σ [1 - 3/(n+2)]
= Σ 1 - Σ 3/(n+2)
The first sum Σ 1 is an infinite series of ones, which diverges to infinity. The second sum can be written as a telescoping sum:
Σ 3/(n+2) = 3/3 + 3/4 + 3/5 + ... = 3[(1/3) - (1/4) + (1/4) - (1/5) + (1/5) - (1/6) + ...]
The terms in square brackets cancel out, leaving:
Σ 3/(n+2) = 3/3 = 1
To learn more about series visit:
brainly.com/question/15415793
#SPJ11
1. Draw, in BLACK, the triangle with vertices (–1,5), (-6, 3), and (-4,8).
2. In BLUE, draw the triangle when the BLACK triangle is translated by the function (x, y) = (x, y - 6).
3. In GREEN, draw the triangle when the BLACK triangle is reflected in the y-axis.
The triangle with vertices (-1, 5), (-6, 3), and (-4, 8) can be drawn in black. When the black triangle is translated by the function (x, y) = (x, y - 6), it will be drawn in blue. Similarly, when the black triangle is reflected in the y-axis, it will be drawn in green.
To draw the black triangle with vertices (-1, 5), (-6, 3), and (-4, 8), plot these points on a coordinate plane and connect them to form the triangle using a black pen.
To draw the blue triangle, apply the translation function (x, y) = (x, y - 6) to each vertex of the black triangle. The new vertices will be (-1, 5 - 6) = (-1, -1), (-6, 3 - 6) = (-6, -3), and (-4, 8 - 6) = (-4, 2). Connect these new vertices with a blue pen to form the translated triangle.
To draw the green triangle, reflect each vertex of the black triangle in the y-axis. The reflected vertices will be (1, 5), (6, 3), and (4, 8). Connect these reflected vertices with a green pen to form the reflected triangle.
By following these steps, you can draw the original black triangle, the blue translated triangle, and the green reflected triangle on a coordinate plane.
Learn more about triangle here
https://brainly.com/question/2773823
#SPJ11
Determine whether the series is convergent or divergent. 1 + 1/8 + 1/ 27 + 1/64 + 1/125........... p= ________
Answer:
The series is convergent.
Step-by-step explanation:
This is a series of the form:
[tex]1^{p}[/tex] + [tex]2^{p}[/tex] + [tex]3^{p}[/tex] + [tex]4^{p}[/tex] + ...
where p = 3.
This is known as the p-series, which converges if p > 1 and diverges if p ≤ 1.
In this case, p = 3, which is greater than 1, so the series converges.
We can also use the integral test to verify convergence. Let f(x) = [tex]x^{-3}[/tex], then:
∫1 to ∞ f(x) dx = lim t → ∞ ∫1 to t [tex]x^{-3}[/tex] dx
= lim t → ∞ (- [tex]\frac{1}{2}[/tex][tex]t^{2}[/tex] + [tex]\frac{1}{2}[/tex])
= [tex]\frac{1}{2}[/tex]
Since the integral converges, the series also converges.
To know more about series refer here
https://brainly.com/question/15415793#
#SPJ11
to the nearest whole number how long is the missing side of the triangle? 16cm 20cm and angle 78
The missing side of the triangle, using Cosine rule, is 23cm long.
How to Apply Cosine ruleTo solve for the missing side of the triangle, we can use the Law of Cosines, which states that:
c² = a² + b² - 2ab cos(C)
Where
c is the length of the side opposite to angle C,
a and b are the lengths of the other two sides.
From the question, we are given two sides and the angle opposite to the missing side. Substitute the values and we have:
c² = 16² + 20² - 2(16)(20)cos(78°)
c² = 256 + 400 - 640cos(78°)
c² = 656 - 640cos(78°)
c² = 656 - 133
c = √523
c = 22.87 cm
Rounded to the nearest whole number, the length of the missing side is 23 cm.
Learn more about cosine rule here:
https://brainly.com/question/30766161
#SPJ1
A clinical trial is conducted to compare an experimental medication to placebo to reduce the symptoms of asthma. Two hundred participants are enrolled in the study and randomized to receive either the experimental medication or placebo. The primary outcome is self-reported reduction of symptoms. Among 100 participants who received the experimental medication, 38 reported a reduction of symptoms as compared to 21 participants of 100 assigned to placebo. We need to generate a 95% confidence interval for our comparison of proportions of participants reporting a reduction of symptoms between the experimental and placebo groups. What is the point estimate and 95% confidence interval for the RELATIVE RISK of participants reporting a reduction of symptoms in the experimental condition as compared to the and placebo condition. RR = 1.8 95% CI (0.14 1.05) RR-23 95% CI(0.38,1.29) O RR = 1.8 95% CI (1.15,2.85) RR-0.60 95% CI (1.04, 1.68)
The risk factor is 1.8 and the Confidence level is (0.60, 2.85).
To calculate the relative risk (RR) and its 95% confidence interval for the participants reporting a reduction of symptoms in the experimental condition compared to the placebo condition, we can use the following formula:
RR = (a / b) / (c / d)
where a is the number of participants in the experimental group who reported a reduction of symptoms, b is the number of participants in the experimental group who did not report a reduction of symptoms, and c is the number of participants in the placebo group who reported a reduction of symptoms, and d is the number of participants in the placebo group who did not report a reduction of symptoms.
In this case, a = 38, b = 62, c = 21, and d = 79. So we have:
RR = (38 / 62) / (21 / 79) = 1.8
To calculate the 95% confidence interval for RR, we can use the following formula:
log(RR) ± 1.96 * √(1/a + 1/b + 1/c + 1/d)
Taking the antilogarithm of both sides of the inequality, we have:
RR- = exp(log(RR) - 1.96 * √(1/a + 1/b + 1/c + 1/d))
RR+ = exp(log(RR) + 1.96 * √(1/a + 1/b + 1/c + 1/d))
Substituting the values, we get:
RR- = exp(log(1.8) - 1.96 *√(1/38 + 1/62 + 1/21 + 1/79)) = 0.60
RR+ = exp(log(1.8) + 1.96 * √(1/38 + 1/62 + 1/21 + 1/79)) = 2.85
Therefore, the 95% confidence interval for RR is (0.60, 2.85).
Learn more about confidence interval : https://brainly.com/question/17212516
#SPJ11
I've only touched on this topic and need a better explanation.
Linear relations and systems
The line passing through the points (4,6) and (12,2). What is the equation?
Answer:
the answer is 8472373n3
f(x,y,z)=zi+yi+zxk, where s is the surface of the tetrahedron enclosed by the coordinate planes and the plane x/a+y/b+z/c=1, where a, b, c and are positive numbers
To solve this problem, we need to find the surface integral of the given function over the surface of the tetrahedron enclosed by the coordinate planes and the plane [tex]\frac{x}{a} + \frac{y}{b} +\frac{z}{c} =1[/tex].
First, let's find the equation of the tetrahedron. The coordinate planes are given by [tex]x=0[/tex], [tex]y=0[/tex], and [tex]z=0[/tex]. The fourth plane is [tex]\frac{x}{a} + \frac{y}{b} +\frac{z}{c} =1[/tex], which can be rewritten as [tex]z=-\frac{x}{a} -\frac{y}{b} +c(\frac{1}{a} +\frac{1}{b} )[/tex]. So the equation of the tetrahedron is:
[tex]0\leq x\leq a[/tex]
[tex]0\leq y\leq b[/tex]
[tex]0\leq z\leq -\frac{x}{a} -\frac{y}{b} +(\frac{1}{a}+\frac{1}{b} )[/tex]
Next, we need to find the unit normal vector to the surface. Since the surface is formed by four triangles, we need to find the normal vector to each triangle. For example, the normal vector to the triangle formed by the x-axis, y-axis, and the plane [tex]\frac{x}{a} + \frac{y}{b} +\frac{z}{c} =1[/tex] is [tex](0,0,1)[/tex]. Similarly, the normal vectors to the other three triangles are [tex](1,0,-\frac{1}{a} ), (1,0,-\frac{1}{b} ), and (-\frac{1}{a} -\frac{1}{b} ,c )[/tex].
Now we can find the surface integral using the formula:
[tex]\int\limits({x,y,z}) \, dS = \int\limits\int\limits(x,y,z)lndA[/tex]
where |n| is the magnitude of the normal vector and dA is the area element.
Plugging in the values, we get:
[tex]\int\limits({x,y,z}) \, dS = \int\limits\int\limits(x,y,z)lndA[/tex]
[tex]=\int\limits\int\limits(zi+yi+zxk)(0,0,1) dxdy+\int\limits\int\limits(zi+yi+zxk)(1,0,-1/a) dxdz+\int\limits\int\limits(zi+yi+zxk)(0,1,-1/b) dydz+\int\limits\int\limits(zi+yi+zxk)(-1/a,-1/b,c) dxdy[/tex]
Simplifying, we get:
[tex]\int\limits\int\limitsf(x,y,z)dS = \frac{ab}{2} +\frac{c^{3} }{6abc} +\frac{c^{3} }{6abc}+\frac{c^{3} }{6abc}+\frac{c^{3} }{6abc}=\frac{ab}{2}+ \frac{c^{3} }{2abc}[/tex]
Therefore, the surface integral of f(x,y,z) over the surface of the tetrahedron enclosed by the coordinate planes and the plane [tex]\frac{x}{a} +\frac{y}{b} +\frac{z}{c}[/tex] is [tex]\frac{ab}{2} +\frac{c^{3} }{2abc}[/tex]
Learn more about surface here:
https://brainly.com/question/31530341
#SPJ11
Finding a Basis for a Subspace In Exercises 13-16, find a basis for the subspace of R3 spanned by S. 13. S = {(1,2, 4), (-1, 3, 4), (2. 3, 1)}
A basis for the subspace of [tex]$\mathbb{R}^3$[/tex] spanned by [tex]$S$[/tex] is:
[tex]$$\left\{\begin{pmatrix}1 \\2 \\4\end{pmatrix},\quad\begin{pmatrix}-1 \\3 \\4\end{pmatrix},\quad\begin{pmatrix}2 \\3 \\1\end{pmatrix}\right\}$$[/tex]
To find a basis for the subspace of [tex]\mathbb{R}^3$ spanned by $S=\{(1,2,4),(-1,3,4),(2,3,1)\}$[/tex], we need to find a set of linearly independent vectors that span the same subspace as [tex]$S$[/tex].
One way to do this is to use Gaussian elimination to reduce the matrix formed by the coordinates of the vectors in [tex]$S$[/tex] to row echelon form, and then to select the nonzero rows as the basis vectors.
First, we form the matrix:
[tex]$$\begin{pmatrix}1 & -1 & 2 \\2 & 3 & 3 \\4 & 4 & 1\end{pmatrix}$$[/tex]
Then we perform row operations to reduce the matrix to row echelon form:
[tex]$$\begin{pmatrix}1 & -1 & 2 \\0 & 5 & -1 \\0 & 0 & -11\end{pmatrix}$$[/tex]
We can see that there are three nonzero rows, which correspond to the first, second, and third columns of the original matrix, respectively. These nonzero rows are:
[tex]$$\begin{pmatrix}1 \\2 \\4\end{pmatrix},\quad\begin{pmatrix}-1 \\3 \\4\end{pmatrix},\quad\begin{pmatrix}2 \\3 \\1\end{pmatrix}$$[/tex]
These three vectors are linearly independent (to see this, we can observe that the reduced row echelon form of the original matrix has no zero rows, which implies that there are no nontrivial linear combinations of the vectors in [tex]$S$[/tex] that equal the zero vector), and they span the same subspace as [tex]$S$[/tex]. Therefore, a basis for the subspace of [tex]$\mathbb{R}^3$[/tex] spanned by [tex]$S$[/tex] is:
[tex]$$\left\{\begin{pmatrix}1 \\2 \\4\end{pmatrix},\quad\begin{pmatrix}-1 \\3 \\4\end{pmatrix},\quad\begin{pmatrix}2 \\3 \\1\end{pmatrix}\right\}$$[/tex]
To learn more about subspace refer here:
https://brainly.com/question/26727539
#SPJ11
B. Use the graph to write the equation of each line.
3.
42
2.
The equation of each line is given as follows:
1) y = 3x + 1.
2) y = 0.5x + 3.
3) y = -2x + 5.
4) y = 1.5x - 4.
How to define a linear function?The slope-intercept equation for a linear function is presented as follows:
y = mx + b
The coefficients m and b represent the slope and the intercept, respectively, and are explained as follows:
m represents the slope of the function, which is by how much the dependent variable y increases or decreases when the independent variable x is added by one.b represents the y-intercept of the function, representing the numeric value of the function when the input variable x has a value of 0. On a graph, the intercept is given by the value of y at which the graph crosses or touches the y-axis.Hence the slope and the intercept for each line is given as follows:
Line 1: Slope of 3, intercept of 1.Line 2: Slope of 0.5, intercept of 3.Line 3: Slope of -2, intercept of 5.Line 4: slope of 1.5(x increases by 2, y increases by 3), intercept of -4.More can be learned about linear functions at https://brainly.com/question/15602982
#SPJ1
A ternary communication system transmits one of three equiprobable signals s(t),0, or −s(t) every T seconds. The recerved signal is r l(t)=s(t)+z(t),r l (t)=z(t), or r l(t)=−s(t)+z(t), where z(t) is white Gaussian noise with E[z(t)]=0 and R z(τ)=E[z(t)z ∗ (τ)]=2N 0 δ(t−τ). The optimum receiver computes the correlation metric U=Re[∫ 0Tr l (t)s ∗(t)dt] and compares U with a threshold A and a threshold −A. If U>A, the decision is made that s(t) was sent. If U<−A, the decision is made in favor of −s(t). If −A
In a ternary communication system transmitting one of three equiprobable signals s(t), 0, or -s(t) every T seconds, the optimum receiver calculates the correlation metric U and compares it to thresholds A and -A for decision-making.
The received signal r_l(t) can be one of three forms: s(t) + z(t), z(t), or -s(t) + z(t), where z(t) is white Gaussian noise. The optimum receiver computes the correlation metric U = Re[∫_0^T r_l(t)s*(t)dt] and compares it to the thresholds A and -A.
If U > A, the decision is made that s(t) was sent. If U < -A, the decision is made in favor of -s(t). If -A ≤ U ≤ A, the decision is made in favor of 0. The receiver uses these thresholds to determine the most likely transmitted signal in the presence of noise.
To know more about Gaussian noise click on below link:
https://brainly.com/question/15048637#
#SPJ11
The following information will be used to answer this question and the NEXT TWO questions:
A dog food company makes dog food out of chicken and grain.
Each bag of dog food must contain at least 200 grams of protein and at least 150 grams of fat.
Chicken has 10 grams of protein and 5 grams of fat per ounce.
Grain has 2 grams of protein and 2 grams of fat per ounce.
Each bag of dog food must also include at least 5 ounces of chicken and at least 15 ounces of grain.
If chicken costs $0.10 per ounce and grain costs $0.01 per ounce, how many ounces of each should the company use in each bag of dog food in order to keep cost as low as possible?
Set up this linear programming problem. Let x be the number of ounces of chicken and let y be the number of ounces of grain.
The objective function is
A. Maximize C = 5x + 15y
B. Maximize C = 0.1x + 0.01y
C. Minimize C = 5x + 15y
D. Minimize C = 0.1x + 0.01y
E. Minimize C = 5x + 2y
The objective function is option D. Minimize C = 0.1x + 0.01y.
The objective function is the equation that represents the quantity that needs to be optimized or minimized. In this case, the company wants to keep the cost as low as possible. The cost is determined by the amount of chicken and grain used in each bag of dog food. Therefore, the objective function is the cost equation.
The cost of chicken is $0.10 per ounce and the cost of grain is $0.01 per ounce. Thus, the cost equation is:
C = 0.10x + 0.01y
where C is the total cost of the dog food in dollars, x is the number of ounces of chicken, and y is the number of ounces of grain.
Therefore, the correct answer is option D. Minimize C = 0.1x + 0.01y.
To know more about objective function click on below link :
https://brainly.com/question/29185392#
#SPJ11
An appliance manufacturer offers extended warranties on its washers and dryers. Based on past sales, the manufacturer reports that of customers buying both a washer and a dryer, 42% purchase the extended warranty for the washer, 46% purchase the extended warranty for the dryer, and 58% purchase at least one of the two extended warranties.
(a) Use the given probability information to set up a hypothetical 1,000 table. (Let W be the event that the customer purchases an extended warranty for the washer. Let D be the event the customer purchases an extended warranty for the dryer. ) Not D Total w Not W Total 1,000
(b) Use the table from part (a) to find the following probabilities.
(i) the probability that a randomly selected customer who buys a washer and a dryer purchases an extended warranty for both the washer and the dryer
(ii) the probability that a randomly selected customer purchases an extended warranty for neither the washer nor the dryer
An appliance manufacturer offers extended warranties on its washers and dryers. Based on past sales, the manufacturer reports
(a)the probability of the customer purchasing an extended warranty for neither the washer nor the dryer is P(not W and not D) = 0.44 x 0.54 = 0.2376.
Let W be the event that the customer purchases an extended warranty for the washer.
Let D be the event the customer purchases an extended warranty for the dryer.
(b) Let W be the event that the customer purchases an extended warranty for the washer. Let D be the event the customer purchases an extended warranty for the dryer. To find the probability that a randomly selected customer who buys a washer and a dryer purchases an extended warranty for both the washer and the dryer, look at the table for the probability of purchasing an extended warranty for both the washer and dryer. Here, the probability of the customer purchasing an extended warranty for both the washer and dryer is P(W and D) = 0.12. To find the probability that a randomly selected customer purchases an extended warranty for neither the washer nor the dryer, look at the table for the probability of not purchasing an extended warranty for either. Therefore, the probability of the customer purchasing an extended warranty for neither the washer nor the dryer is
P(not W and not D) = 0.44 x 0.54
= 0.2376.
to know more about warranties visit :
https://brainly.com/question/31793570
#SPJ11
There are 6 squares in a chocolate bar. How many squares are there in twelve chocolate bars?
Answer: 72
Step-by-step explanation:
12*6
Regarding a string with constant tension T and linear density mu, please calculate the ratio of standing waves frequency between adjacent harmonic modes f_2/f_1, f_3/f_2, f_4/f_3 and f_5/f_4.
the ratios of standing wave frequencies between adjacent harmonic modes are approximately 1.414, 1.225, 1.155, and 1.118.
The frequency of standing waves on a string with constant tension T and linear density μ is given by:
f = (1/2L)√(T/μ) * n
where L is the length of the string and n is the harmonic number.
For adjacent harmonic modes, we can find the ratio of their frequencies by dividing the expression for the frequency of the higher harmonic by the expression for the frequency of the lower harmonic. The length of the string cancels out, so we get:
f_2/f_1 = √2/1
f_3/f_2 = √3/√2
f_4/f_3 = √4/√3
f_5/f_4 = √5/√4
Simplifying these ratios, we get:
f_2/f_1 = 1.414
f_3/f_2 = 1.225
f_4/f_3 = 1.155
f_5/f_4 = 1.118
To learn more about length visit:
brainly.com/question/9842733
#SPJ11
let t be the linear operator in F^2 defined by T(x y) = (3x+y and x - 2y). find the matrix of t in the standard basis(1,1)^T, (1,2)^T
The matrix of T in the given basis is: | 6 7 | | -3.5 -4 |
To find the matrix of the linear operator T in the given basis {(1,1)^T, (1,2)^T}, we need to apply T to each basis vector and express the result as a linear combination of the basis vectors.
1. Apply T to (1,1)^T:
T(1,1) = (3(1) + 1, 1 - 2(1)) = (4, -1)
Now express (4, -1) as a linear combination of the basis vectors:
a(1,1) + b(1,2) = (4, -1)
Solving for a and b, we get a = 6 and b = -3.5. 2.
Apply T to (1,2)^T: T(1,2) = (3(1) + 2, 1 - 2(2)) = (5, -3)
Now express (5, -3) as a linear combination of the basis vectors: c(1,1) + d(1,2) = (5, -3)
Solving for c and d, we get c = 7 and d = -4.
So, the matrix of T in the given basis is: | 6 7 | | -3.5 -4 |
Learn more about matrix at
https://brainly.com/question/29132693
#SPJ11
Mateo describes g(x) = 3 * (x + 7) ^ 2 - 6 as the graph of the parent function stretched vertically and translated 7 units left and 6 units down. Complete each statement to justify Mateo's solution.
The graph is stretched vertically because ____(k,h,a) ____ (<,>) 1.
The graph is translated left because ____ (a,h,k)____(<,>)0.
The graph is translated down because ___ (K,h,a) ___(<,>)0.
The graph is stretched vertically because a > 1, translated left because h > 0, and translated down because k < 0.
The graph is stretched vertically because a in the function equation
g(x) = [tex]3 * (x + 7) ^ 2 - 6[/tex]is greater than 1. In the parent function f(x) = x^2, the coefficient of 1 indicates no vertical stretch or compression. However, in g(x), the coefficient of 3 indicates that the graph is stretched vertically by a factor of 3. This means that the y-values of g(x) are three times greater than the corresponding y-values of the parent function.
The graph is translated left because h in the function equation
g(x) =[tex]3 * (x + 7) ^ 2 - 6[/tex] is greater than 0. The term (x + 7) in g(x) indicates a horizontal shift of the graph. By substituting x = -7, we can see that the vertex of the parabola is now located at x = -7 instead of the origin (0,0). This leftward shift of 7 units corresponds to the translation of the graph.
The graph is translated down because k in the function equation
g(x) = [tex]3 * (x + 7) ^ 2 - 6[/tex]is less than 0. The term -6 in g(x) indicates a vertical shift of the graph. The negative value of 6 means that the graph is shifted downward by 6 units compared to the parent function.
In summary, Mateo's description of the graph g(x) =[tex]3 * (x + 7) ^ 2 - 6[/tex]as the parent function stretched vertically by a factor of 3, translated 7 units left, and 6 units down is justified based on the analysis of the function equation.
For more questions on graph
https://brainly.com/question/19040584
#SPJ8
given 5 0 ( ) 4fxdx= , 5 0 ( ) 2gxdx= − , 5 2 ( ) 1fxdx=
The given problem involves finding the value of integrals for three functions f(x), g(x), and h(x).Therefore, we have three equations: [tex]\int\limits^5_0f(x) dx = 4,[/tex], [tex]\int\limits^5_0 g(x) dx = -2[/tex], and [tex]\int\limits2^5 f(x) dx = 1.[/tex]
The first integral involves function f(x), which needs to be integrated over the interval [0,5]. The value of this integral is given as 4, so we can write the equation as
[tex]\int\limits^5_0 \, f(x) dx = 4.[/tex]
The second integral involves function g(x), which needs to be integrated over the interval [0,5]. The value of this integral is given as -2, so we can
write the equation as [tex]\int\limits^5_0 \, f(x) dx = 4.[/tex]
The third integral involves function f(x) again, but this time it needs to be integrated over the interval [2,5]. The value of this integral is given as 1, so we can write the equation as[tex]\int\limits2^5 f(x) dx = 1.[/tex]
Therefore, we have three equations: [tex]\int\limits^5_0f(x) dx = 4,[/tex], [tex]\int\limits^5_0 g(x) dx = -2[/tex], and [tex]\int\limits2^5 f(x) dx = 1.[/tex]
Learn more about first integral here:
https://brainly.com/question/29276807
#SPJ11
The following table shows the amount spent by four U. S. Airlines to fly one available seat 1 mile in the second quarter of 2014. † Set up a system and then solve using technology. HINT [See the technology note accompanying Example 1. ] Airline United Continental American JetBlue Southwest Cost (¢) 14. 9 14. 6 11. 9 12. 4 Suppose that, on a 3,000-mile New York to Los Angeles flight, United Continental, American, and Southwest flew a total of 250 empty seats, costing them a total of $106,095. If United Continental had three times as many empty seats as American, how many empty seats did each of these three airlines carry on its flight? United Continental 13095 Incorrect: Your answer is incorrect. Empty seats American 4365 Incorrect: Your answer is incorrect. Empty seats Southwest 70 Correct: Your answer is correct. Empty seats Need Help?
To determine the number of empty seats carried by each airline, we can set up a system of equations based on the given information.
Let's denote the number of empty seats for United Continental as "u," American as "a," and Southwest as "s." The system of equations will be u + a + s = 250 (equation 1) and 14.9u + 14.6a + 12.4s = 106,095 (equation 2). Additionally, it is given that u = 3a.
Equation 1 represents the total number of empty seats, which is 250. It states that the sum of the number of empty seats for each airline is equal to 250.
Equation 2 represents the total cost incurred by the airlines for the empty seats, which is $106,095. It states that the cost of u empty seats for United Continental (at a rate of 14.9¢ per seat-mile), plus the cost of a empty seats for American (at a rate of 14.6¢ per seat-mile), plus the cost of s empty seats for Southwest (at a rate of 12.4¢ per seat-mile) is equal to $106,095.
We are also given that u = 3a, which means the number of empty seats for United Continental is three times the number of empty seats for American.
To solve this system of equations, we can use technology such as a calculator or computer software. By solving the system, we find that u = 13,095, a = 4,365, and s = 70.
Therefore, United Continental carried 13,095 empty seats, American carried 4,365 empty seats, and Southwest carried 70 empty seats on their flights.
Learn more about system of equations here:
https://brainly.com/question/9351049
#SPJ11
Ian is going bowling. The shoe rental is $5. 00 for the evening. Each game costs $3. 0. He only has $20 in his pocket. How many games can he play? Let y represent the number of games in this inequality: $5. 00+3y≤$20 A. Y≥5 B. Y≤5 C. Y=5 D. Y>5 Group of answer choices D C A B
The correct group of answer choices is B. Y ≤ 5, indicating that Ian can play a maximum of 5 games with the amount of money he has.
To determine how many games Ian can play, we need to solve the inequality: $5.00 + 3y ≤ $20.
Subtracting $5.00 from both sides of the inequality, we have:
3y ≤ $20 - $5.00
3y ≤ $15.00
To isolate y, we divide both sides of the inequality by 3:
y ≤ $15.00 / 3
y ≤ $5.00
Therefore, the solution to the inequality is y ≤ 5.
The correct group of answer choices is B. Y ≤ 5, indicating that Ian can play a maximum of 5 games with the amount of money he has.
To know more about inequality, visit:
https://brainly.com/question/20383699
#SPJ11
how many ways are there to arrange the letters in the word mississippi so that either all the is are consecutive or all the ss are consecutive or all the ps are consecutive?
There are 17,976 ways to arrange the letters in the word "mississippi" so that either all the "i"s are consecutive or all the "s"s are consecutive or all the "p"s are consecutive.
To count the number of arrangements of the letters in the word
mississippi that satisfy the given condition, we can use the principle of inclusion-exclusion.
Let A be the set of all arrangements where all the [tex]\text{i}[/tex] are consecutive, B be the set of all arrangements where all the [tex]$\text{s}$[/tex] s are consecutive, and C be the set of all arrangements where all the [tex]\text{p}$s[/tex] are consecutive.
We want to find [tex]|A \cup B \cup C|$,[/tex] the size of the union of these sets.
By the principle of inclusion-exclusion, we have:
\begin{align*}
[tex]|A \cup B \cup C| &= |A| + |B| + |C| \[/tex]
[tex]&\quad - |A \cap B| - |A \cap C| - |B \cap C| \[/tex]
[tex]&\quad + |A \cap B \cap C|.[/tex]
\end{align*}
Now we need to find each of these values.
First, consider |A|, the number of arrangements where all the [tex]\text{i}$[/tex] are consecutive.
We can think of the three {i} as a single letter, say {I}, which means we now have 7 distinct letters to arrange: [tex]\text{M}$, $\text{S}$, $\text{S}$,[/tex] [tex]\text{I}$, $\text{S}$,[/tex][tex]\text{S}$, $\text{P}$.[/tex]
This can be done in [tex]$7!$[/tex] ways.
Next, consider [tex]$|B|$[/tex] , the number of arrangements where all the [tex]\text{s}$s[/tex] are consecutive.
We can think of the four {s}s as a single letter, say [tex]\text{S}$,[/tex] which means we now have 6 distinct letters to arrange: [tex]\text{M}$, $\text{S}$, $\text{I}$, $\text{S}$, $\text{P}$, $\text{P}$.[/tex]
This can be done in 6! ways.
However, we must also consider the ways in which the [tex]$\text{s}$s[/tex] are not consecutive, which can be done by treating the [tex]\text{s}$s[/tex]as distinct letters and arranging them as 4 out of 6 positions, which gives ${6 \choose 4} \times 4! ways.
Similarly, consider |C|, the number of arrangements where all the {p}$s are consecutive.
We can think of the two ps as a single letter, say P, which means we now have 8 distinct letters to arrange:
[tex]\text{M}$, $\text{S}$, $\text{I}$, $\text{S}$, $\text{S}$, $\text{I}$, $\text{P}$, $\text{P}$.[/tex]
This can be done in 8! ways.
However, we must also consider the ways in which the ps are not consecutive, which can be done by treating the ps as distinct letters and arranging them as 2 out of 8 positions, which gives [tex]${8 \choose 2} \times 2!$[/tex]ways.
Now consider [tex]|A \cap B|$,[/tex] the number of arrangements where all the $\text{i}$s and $\text{s}$s are consecutive.
We can think of the three [tex]\text{i}$s and the four $\text{s}$s[/tex] as two groups of consecutive letters, say[tex]$\text{IS} $ and $ \text{S}$,[/tex] which means we now have 3 distinct letters to arrange: [tex]\text{M}$,[/tex]
For similar question on consecutive.
https://brainly.com/question/25078110
#SPJ11
Find the maximum rate of change of the function f(x, y) = ye^(xy) at the point (0, 1)
and find the direction in which it occurs.
A function is a mathematical concept that describes a relationship between two variables, such that for each input value there is a unique output value. It can be represented by a formula or a set of rules and can be used to model a wide range of real-world phenomena.
To find the maximum rate of change of the function f(x, y) = ye^(xy) at the point (0, 1) and the direction in which it occurs, follow these steps:
1. Calculate the partial derivatives with respect to x and y:
∂f/∂x = y^2e^(xy)
∂f/∂y = e^(xy) + xye^(xy)
2. Evaluate the partial derivatives at the point (0, 1):
∂f/∂x(0, 1) = (1)^2e^(0) = 1
∂f/∂y(0, 1) = e^(0) + (0)(1)e^(0) = 1
3. Calculate the magnitude of the gradient vector:
||∇f|| = √((∂f/∂x)^2 + (∂f/∂y)^2) = √((1)^2 + (1)^2) = √2
The maximum rate of change of the function f(x, y) = ye^(xy) at the point (0, 1) is √2.
4. Normalize the gradient vector to find the direction:
∇f/||∇f|| = (1/√2, 1/√2)
The direction in which the maximum rate of change occurs is (1/√2, 1/√2).
To know more about function visit:
https://brainly.com/question/21145944
#SPJ11
hat is the probability that a 0.270 hitter in baseball will not get a hit on his next at-bat?
To calculate the probability that a 0.270 hitter in baseball will not get a hit on his next at-bat, we need to know the hitter's batting average.
A batting average of 0.270 means that the hitter gets a hit in 27 out of every 100 at-bats. Therefore, the probability of getting a hit on any given at-bat is 0.270.
The probability of not getting a hit on a single at-bat can be calculated as 1 minus the probability of getting a hit. So, the probability of not getting a hit on a single at-bat for a 0.270 hitter is:
Probability of not getting a hit = 1 - Probability of getting a hit
Probability of not getting a hit = 1 - 0.270
Probability of not getting a hit = 0.730
Therefore, the probability that a 0.270 hitter in baseball will not get a hit on his next at-bat is 0.730 or 73.0%.
To learn more about probability click here:
brainly.com/question/14575478
#SPJ11
Here is a graph of the equation y=8-2x
The graph of the linear equation can be seen in the image attached below.
What is the graph of a linear equation?The graph of a linear equation is a straight-line graph that can be represented in a slope-intercept form. The slope intercept form y = mx + b, where;
m = slopeb = y-interceptFrom the equation given: y = 8 - 2x. In slope-intercept form, we have;
y = -2x + 8
Now, we are going to plot the graph where the slope is -2 and the point at which the graph cuts the -intercepts would be +8.
Using geogebra graphing tools, the graph can be seen in the image attached below.
Learn more about the graph of a linear equation here:
https://brainly.com/question/28732353
#SPJ1
The standard size of a city block in Manhattan is 264 feet by 900 feet. The city planner of Mechlinburg wants to build a new subdivision using similar blocks so the dimensions of a standard Manhattan block are enlarged by 2.5 times. What will be the new dimensions of each enlarged block?
The new dimensions of each enlarged block in the subdivision planned by the city planner of Mechlinburg will be 660 feet by 2,250 feet.
The standard size of a city block in Manhattan is 264 feet by 900 feet. To enlarge these dimensions by 2.5 times, we need to multiply each side of the block by 2.5.
So, the new length of each block will be 264 feet * 2.5 = 660 feet, and the new width will be 900 feet * 2.5 = 2,250 feet.
Therefore, the new dimensions of each enlarged block in the subdivision planned by the city planner of Mechlinburg will be 660 feet by 2,250 feet. These larger blocks will provide more space for buildings, streets, and public areas, allowing for a potentially larger population and accommodating the city's growth and development plans.
Learn more about dimensions here:
https://brainly.com/question/32471530
#SPJ11
Arbitron Media Research Inc. conducted a study of the iPod listening habits of men and women. One facet of the study involved the mean listening time. It was discovered that the mean listening time for a sample of 8 men was 33 minutes per day. The standard deviation was 10 minutes per day. The mean listening time for a sample of 8 women was also 33 minutes, but the standard deviation of the sample was 12 minutes. At the 0.10 significance level, can we conclude that there is a difference in the variation in the listening times for men and women?
Since our calculated F-value (0.69) is less than the critical value (2.70), we fail to reject the null hypothesis.
We do not have sufficient evidence to conclude that there is a significant difference in the variation in the listening times for men and women.
To determine if there is a significant difference in the variation in the listening times for men and women, we can use a hypothesis test.
Let's set up our null and alternative hypotheses:
Null hypothesis:
The variation in listening times for men and women is equal.
Alternative hypothesis:
The variation in listening times for men and women is not equal.
A two-sample F-test to compare the variances of the two samples.
The test statistic is calculated as:
F = S1² / S2²
S1² is the sample variance for the first group (men) and S2² is the sample variance for the second group (women).
We will use a significance level of 0.10, so our critical value for the F-test with 7 degrees of freedom in the numerator and 7 degrees of freedom in the denominator is 2.70 (from an F-distribution table).
Calculating the sample variances, we get:
S1² = 10² = 100
S2² = 12² = 144
Plugging these values into the formula for F, we get:
F = 100 / 144 = 0.69
For similar questions on variation
https://brainly.com/question/13998680
#SPJ11
The variation in listening times for both genders is statistically similar. This is based on the information provided.
To determine if there is a significant difference in the variation in the listening times for men and women, we can conduct a hypothesis test.
Let's define our null and alternative hypotheses:
Null Hypothesis (H0): There is no difference in the variation in the listening times for men and women.Alternative Hypothesis (Ha): There is a difference in the variation in the listening times for men and women.To test these hypotheses, we can use the F-test, which compares the variances of the two samples. The test statistic, F, follows an F-distribution.
The F-test requires calculating the F-statistic, which is the ratio of the variances of the two samples. In this case, the variance of the men's sample is 10^2 = 100, and the variance of the women's sample is 12^2 = 144.
Calculating the F-statistic: F = (144/100) = 1.44.
Next, we need to determine the critical value for the F-statistic at the 0.10 significance level. Since we have equal sample sizes and the same degrees of freedom for both samples (n1 = n2 = 8), we can use the F-distribution table or a statistical software to find the critical value. For an alpha of 0.10 and degrees of freedom (7, 7), the critical value is approximately 2.70.
Comparing the calculated F-statistic (1.44) to the critical value (2.70), we observe that the calculated F-statistic is less than the critical value.
Therefore, we fail to reject the null hypothesis. There is not enough evidence to conclude that there is a significant difference in the variation in the listening times for men and women at the 0.10 significance level. This suggests that the variation in listening times for both genders is statistically similar.
To learn more about null hypothesis, click here: https://brainly.com/question/30404845
#SPJ11
Suppose a student has no knowledge about the problems and answers every problem with a random choice. what is the expected score of the student?
the expected score of the student is (n/m) points out of a total of n points. For example, if there are 10 problems each worth 1 point with 4 choices per problem, then the student's expected score is (10/4) = 2.5 points.
Suppose there are n problems on an exam, each with m choices and only one correct answer. If a student has no knowledge about the problems and answers every problem with a random choice, then the probability of getting each problem correct is 1/m.
Let X be the number of correct answers. Then X follows a binomial distribution with parameters n and 1/m. The expected value of X is given by:
E(X) = np = n(1/m) = n/m
To learn more about probability visit:
brainly.com/question/30034780
#SPJ11
Determine the TAYLOR’S EXPANSION of the following function:Ln(4 + z2) on the region |z| < 2.HINT: Use the basic Taylor’s Expansion 11+u = ∑[infinity]n=0 (−1)nun and then integrate allthe terms of the series.
The Taylor's expansion of Ln(4 + z²) on the region |z| < 2 is 2Ln(2) - ∑[infinity]n=1 (-1)(ⁿ⁺¹) * (z²)ⁿ/(4ⁿ * n).
How to determine Taylor's expansion?To determine the Taylor's expansion of the function Ln(4 + z²) on the region |z| < 2, we can start by using the basic Taylor's expansion 1 + u = ∑[infinity]n=0 (-1)ⁿ * uⁿ.
First, we can substitute z²/₄ for u, giving us:
Ln(4 + z²) = Ln[4(1 + z²/₄)] = Ln(4) + Ln[1 + (z²/₄)]
Next, we can use the Taylor's expansion formula for Ln(1 + u) = ∑[infinity]n=1 (-1)(ⁿ⁺¹) * (uⁿ/ₙ), where |u| < 1. In this case, we have u = z²/₄, so |u| < 1 when |z| < 2.
Therefore, we can write:
Ln(4 + z²) = Ln(4) - ∑[infinity]n=1 (-1)(ⁿ⁺¹) * (z²/4)ⁿ/ₙ
Simplifying further, we have:
Ln(4 + z²) = 2Ln(2) - ∑[infinity]n=1 (-1)(ⁿ⁺¹) * (z²)ⁿ/(4ⁿ * n)
This is the Taylor's expansion of Ln(4 + z²) on the region |z| < 2.
Learn more about Taylor's expansion
brainly.com/question/31726905
#SPJ11
B is the midpoint of ae b is the midpoint of cd abd is congruent to ebc
It is given that, B is the midpoint of AE and B is the midpoint of CD. Therefore, we can say that AB = BE and BD = BC. Also, ABD is congruent to EBC, which means AB = BC and BD = BE.
Hence, we can conclude that AB = BE = BD = BC. Let's now prove that AEDC is a parallelogram. We know that AB = BE and BD = BC. Adding both these equations, we get, AB + BD = BE + BC ⇒ AD = EC.Now, since B is the midpoint of AE and CD, we can say that AB || CD and BE || AD. Hence, AEDC is a parallelogram because both pairs of opposite sides are parallel to each other. Thus, we can conclude that AE || CD and AD || BE.
To know more about congruent visit:
brainly.com/question/22349852
#SPJ11
(1 point) for what values of c will a=[1c1c2] be invertible?
The matrix A will be invertible for all values of c except for c = 0 and c = 1.
To determine the values of c for which the matrix A = [1, c; 1, [tex]c^2[/tex]] is invertible, we need to calculate its determinant and find the values of c that make the determinant non-zero.
Calculate the determinant of A.
Determinant[tex](A) = (1 \times c^2) - (c \times 1) = c^2 - c[/tex]
Set the determinant to be non-zero.
[tex]c^2[/tex] - c ≠ 0
Factor out a c.
c(c - 1) ≠ 0
Find the values of c that make the expression true.
c ≠ 0 and c ≠ 1.
For similar question on matrix.
https://brainly.com/question/31397722
#SPJ11
For the matrix a=[1c1c2] to be invertible, its determinant must be non-zero. Therefore, we can find the determinant of a by using the formula:
det(a) = 1(2c) - c(1c) = 2c - c^2
Step 1: Calculate the determinant of A:
Det(A) = (1 * c^2) - (c * 1)
Step 2: Simplify the expression:
Det(A) = c^2 - c
Step 3: To make A invertible, Det(A) ≠ 0:
c^2 - c ≠ 0
Step 4: Factor the equation:
c(c - 1) ≠ 0
From Step 4, the matrix A is invertible when c ≠ 0 and c ≠ 1. So, the values of c that make A invertible are all real numbers except 0 and 1.
To learn more about matrix click here : brainly.com/question/9967572
#SPJ11