The most commonly used water disinfectant in the United States is:d. Chlorine
Chlorine is widely used as it is effective in eliminating harmful microorganisms, and it helps maintain water quality throughout the distribution system.Chlorine is the most commonly used water disinfectant in the United States. It is used to kill bacteria and other waterborne pathogens in public water supplies. Chlorine is typically added to water in the form of chlorine gas or a liquid solution of sodium hypochlorite. It is also used in some swimming pools and other recreational water facilities.
learn more about Chlorine Refer: https://brainly.com/question/20834469
#SPJ11
Electron withdrawing vs donating...what do each do to a negative charge and acidity?
An electron withdrawing group will decrease the negative charge and increase acidity, while an electron donating group will increase the negative charge and decrease acidity.
Electron withdrawing groups (EWGs) pull electrons away from a molecule or atom, creating a positive charge on that molecule or atom. This results in an increase in acidity because the positive charge makes it easier for the molecule or atom to donate a proton. On the other hand, electron donating groups (EDGs) push electrons towards a molecule or atom, creating a negative charge on that molecule or atom. This results in a decrease in acidity because the negative charge makes it harder for the molecule or atom to donate a proton. Therefore, EWGs increase acidity while EDGs decrease acidity.
Learn more about molecule Refer: https://brainly.com/question/15089056
#SPJ11
Pairs of valence electrons that are not shared between atoms are called ________.
(covalent, unshared pairs, shared, stable electron, single)
Pairs of valence electrons that are not shared between atoms are called b. unshared pairs
Unshared pairs, also known as lone pairs or nonbonding electron pairs, these unshared pairs play a significant role in determining the shape of molecules and the reactivity of atoms in chemical reactions. In contrast, shared electron pairs participate in covalent bonding, which involves the sharing of electrons between two atoms to create a stable electron configuration.
Covalent bonding results in the formation of molecules with varying properties depending on the atoms involved and the number of electron pairs shared. There can be single, double, or triple covalent bonds depending on how many pairs of electrons are being shared. Stable electron configurations are achieved when atoms reach the desired eight electrons in their outermost shell, adhering to the octet rule. In summary, unshared pairs refer to valence electrons that do not participate in bonding, while shared electron pairs contribute to covalent bonding, allowing atoms to achieve stable electron configurations. Pairs of valence electrons that are not shared between atoms are called b. unshared pairs
learn more about covalent bonding here:
https://brainly.com/question/29266368
#SPJ11
You need a 70% alcohol solution. On hand, you have a 325 mL of a 15% alcohol mixture. You also have 95% alcohol mixture. How much of the 95% mixture will you need to add to obtain the desired solution
The approximately 239.5 mL of the 95% alcohol mixture to mix with the 325 mL of 15% alcohol mixture to obtain a 70% alcohol solution.
To obtain a 70% alcohol solution, we need to calculate the amount of 95% alcohol mixture required to mix with the 325 mL of 15% alcohol mixture. Let's assume x mL of the 95% alcohol mixture is required to obtain the desired solution.
The amount of alcohol present in the 325 mL of 15% alcohol mixture is:
Alcohol in 325 mL of 15% alcohol mixture = 325 mL × 15% = 48.75 mL
To obtain a 70% alcohol solution, the amount of alcohol required in the final solution will be:
Amount of alcohol required = 70% × (325 mL + x)
We can set up an equation by equating the amount of alcohol in the initial mixture and the amount of alcohol required in the final solution:
48.75 mL + 0.95x mL = 0.7 (325 mL + x mL)
Solving this equation, we get:
0.95x = 227.5
x ≈ 239.5 mL
For more such questions on alcohol
https://brainly.com/question/30638967
#SPJ11
What happens after a female cone is fertilized
Hooke's law states that a linear relationship exists between stress and strain upto proportional limit.
True or False?
Yes, that's correct. Hooke's law is a fundamental principle of mechanics that states that within the elastic limit of a material, the stress applied to it is directly proportional to the strain it produces.
This means that if a material is subjected to a force (stress), it will deform (strain) in proportion to that force, as long as the deformation does not exceed a certain limit, known as the proportional limit.
Mathematically, Hooke's law can be expressed as:
stress = modulus of elasticity × strain
where the modulus of elasticity is a constant that depends on the material's properties and is unique to each material. The proportionality constant between stress and strain is valid only up to the proportional limit, beyond which the relationship becomes non-linear and the material exhibits plastic deformation.
learn more about stress here:
https://brainly.com/question/31366817
#SPJ11
please match the following responses with the questions below. - the primary standard used for this experiment. - at what place does an indicator change color during a titration? - used during a titration to measure the volume of titrant delivered. - used in measuring the 6m naoh to prepare the titrant. a. none of the above b. phenolphtahlein c. buret d. 6m naoh (sodium hyroxide) e. khc8h4o4 potassium hydrogen phthalate f. primary standard g. titrant h. endpoint i. pump dispensor
The following responses with the questions below are matched correctly :-
- the primary standard used for this experiment: f. primary standard
- at what place does an indicator change color during a titration?: h. endpoint
- used during a titration to measure the volume of titrant delivered: c. buret
- used in measuring the 6m naoh to prepare the titrant: e. khc8h4o4 potassium hydrogen phthalate
1. the primary standard used for this experiment: e. khc8h4o4 potassium hydrogen phthalate (primary standard)
2. at what place does an indicator change color during a titration?: h. endpoint
3. used during a titration to measure the volume of titrant delivered: c. buret
4. used in measuring the 6m naoh to prepare the titrant: i. pump dispenser
Acid-base titrations are a kind of volumetric analysis in which the substance whose concentration is to be identified is reacted with a standard solution of acid or base whose concentration is known. These titrations have a specific end-point at which the acid and base are in stoichiometric amounts, and thus the pH of the solution is neutral (7.0).In an acid-base titration, a basic solution is created at the equivalence point of the acid and base reaction.
Visit here to learn more about titration : https://brainly.com/question/31271061
#SPJ11
What must be added to create a bradford standard curve
To create a Bradford standard curve, a standard protein solution of known concentration must be added to a series of test tubes. The Bradford reagent, which is a mixture of Coomassie Brilliant Blue dye and phosphoric acid, is then added to each test tube.
The mixture of the protein and Bradford reagent produces a color change that can be measured using a spectrophotometer. The amount of color produced is proportional to the concentration of protein in the solution. The Bradford standard curve is generated by plotting the absorbance values at different concentrations of the standard protein solution. This curve can then be used to determine the concentration of an unknown protein solution by measuring its absorbance and comparing it to the standard curve. It is important to use a standard protein solution that is similar in composition to the unknown protein solution to ensure accurate measurements. A common standard protein used for Bradford assays is bovine serum albumin (BSA). Overall, the Bradford assay is a widely used method for determining protein concentrations due to its ease of use, high sensitivity, and broad dynamic range.
learn more about Bradford standard here
https://brainly.com/question/29972727
#SPJ11
what does this nmr data indicate about the purity of the cyclohexene? use three key signals to justify your answer.
NMR spectroscopy is a powerful analytical tool that provides information about the molecular structure of organic compounds. It can also be used to determine the purity of a sample by analyzing the chemical shifts, peak shapes, and peak integrations of the NMR signals.
What is Cyclohexane?
Cyclohexane is a cyclic hydrocarbon with the chemical formula C6H12. It is a colorless, flammable liquid with a mild odor and is insoluble in water. Cyclohexane is a simple cycloalkane, which means that it is a hydrocarbon molecule containing only single covalent bonds between carbon atoms arranged in a ring.
If the cyclohexene is pure, then its NMR spectrum should display a single set of well-resolved signals that correspond to the different types of protons in the molecule. The chemical shifts of these signals should match those expected for cyclohexene, and the peak shapes should be sharp and symmetrical.
Learn more about Cyclohexane from the given link
https://brainly.com/question/30230108
#SPJ4
Write a balanced equation for the reaction which occurs with the CaCL2 solution. [Please use fatty acid-CO2 - Na as the structure for your beginning soap.]
The balanced chemical equation for the reaction of calcium chloride (CaCl₂) with a fatty acid (R-COOH) to form soap (R-COONa) and carbon dioxide (CO₂) is:
CaCl₂ + 2 R-COOH → R-COONa + CO₂ + 2 HCl
In this reaction, calcium chloride (CaCl₂) reacts with a fatty acid (R-COOH), which is the structure of a typical soap molecule, to form soap (R-COONa) and carbon dioxide (CO₂) as products. The balanced equation is obtained by ensuring that the number of atoms of each element is the same on both sides of the equation.
To balance the equation, the coefficients of the reactants and products are adjusted. In this case, two molecules of the fatty acid are required to react with one molecule of calcium chloride to form two molecules of soap, one molecule of carbon dioxide, and two molecules of hydrochloric acid (HCl) as a byproduct.
The balanced equation represents a stoichiometric ratio between the reactants and products in the chemical reaction.
To know more about calcium chloride refer here:
https://brainly.com/question/28944725#
#SPJ11
What is the average mass of one Ca atom?A) 40.08 amu D) 2.41 x 10-21 amuB) 40.08 g E) 2.41x1025 gC) 40.08 g/mol
The average mass of one Ca atom is approximately 40.08 amu. The correct answer is option A.
The average mass of one calcium (Ca) atom can be found using the atomic mass unit (amu) as the unit of measurement. The atomic mass of calcium is approximately 40.08 amu. This value is derived from the weighted average of the naturally occurring isotopes of calcium. It's important to note that amu is used to represent the mass of individual atoms, while grams (g) and grams per mole (g/mol) are used for larger quantities of substances.
In this case, the correct answer is A) 40.08 amu. This value represents the mass of one calcium atom, and it helps scientists determine and compare the masses of different elements and compounds. The other options, such as grams and grams per mole, are not appropriate units for measuring the mass of a single atom.
For more such questions on average mass, click on:
https://brainly.com/question/31562188
#SPJ11
pepsin functions in the stomach that has a ph of 2.5; and trypsin functions in the small intestine that has a ph of 6.5. you have an unlabeled vial, and you know it is either trypsin or pepsin, and you determine the reaction rate under different conditions to determine which one it probably is. if the vial contains pepsin, which result below would you expect to find?
The highest reaction rate would be observed at a pH of 2.5 if the vial contains pepsin.
If the vial contains pepsin, you would expect to find the highest reaction rate at a pH of 2.5, since pepsin functions in the stomach which has a pH of 2.5. If the pH is raised to 6.5, which is the pH of the small intestine where trypsin functions, the reaction rate of pepsin would be significantly lower. The highest reaction rate would be observed at a pH of 2.5 if the vial contains pepsin.
Pepsin is the primary digestive enzyme in the stomach and is produced by the gastric gland in the stomach, whereas trypsin is produced by the pancreas and is a component of pancreatic juice. While trypsinogen, an inactive form of the enzyme, is activated by the enzyme enterokinase, pepsinogen, an inactive form of the enzyme, is activated by the HCl in gastric juice. Pepsin is an aspartic protease that uses a catalytic aspartate in its active site, whereas trypsin is a serine protease that uses a serine residue. While pepsin requires a pH of 1.8 for optimal activity (pH 7.5-8), trypsin performs best in an alkaline environment. Trypsin comes in eight different types, but pepsin only contains four: pepsin A, B, C, and D.
Learn more about pepsin here
https://brainly.com/question/29821731
#SPJ11
what is the total amount of energy necessary to break apart 2 moles of h2 molecules and 1 mole of o2 molecules?
The total amount of energy necessary to break apart 2 moles of H2 molecules and 1 mole of O2 molecules is 1370 kJ.
To calculate the total amount of energy required to break apart 2 moles of H2 molecules and 1 mole of O2 molecules, we need to consider the bond dissociation energy of each type of bond.
1. H2 molecule has one H-H bond with a bond dissociation energy of approximately 436 kJ/mol.
2. O2 molecule has one O=O double bond with a bond dissociation energy of approximately 498 kJ/mol.
Step 1: Calculate the energy required to break H2 molecules.
Energy for H2 = 2 moles * 436 kJ/mol = 872 kJ
Step 2: Calculate the energy required to break O2 molecules.
Energy for O2 = 1 mole * 498 kJ/mol = 498 kJ
Step 3: Add the energies calculated in steps 1 and 2 to find the total energy.
Total energy = Energy for H2 + Energy for O2 = 872 kJ + 498 kJ = 1370 kJ
The total amount of energy necessary to break apart 2 moles of H2 molecules and 1 mole of O2 molecules is 1370 kJ.
Learn more about energy here
https://brainly.com/question/1371184
#SPJ11
write the balanced redox equation for both reactions. 2. calculate the molarity of the kmno4 solution for each trial and then average. 3. find the percent by volume of the hydrogen peroxide sample for each of your trials then average. the density of the hydrogen peroxide is 1.00 g/ml.
1) Redox equation : 5H₂O₂ + 2KMnO₄ + 8H₂SO₄ -> 5O₂ + 2MnSO₄ + K₂SO₄ + 8H₂O ; 2) molarity= 0.00158 M ; 3) % by volume = (0.5 mL / 100 mL) x 100% = 0.5%
1. To write the balanced redox equation for both reactions, we need to first identify the oxidation and reduction half-reactions.
In the first reaction, hydrogen peroxide (H₂O₂) is oxidized to oxygen gas (O₂) while potassium permanganate (KMnO₄) is reduced to manganese dioxide (MnO₂) and water (H₂O).
The oxidation half-reaction is:
H₂O₂ -> O₂
The reduction half-reaction is:
5e⁻ + 8H⁺ + MnO₄⁻ -> MnO₂ + 4H₂O
To balance the equation, we need to multiply the oxidation half-reaction by 5 and the reduction half-reaction by 2:
5H₂O₂ -> 5O₂
10e- + 16H⁺ + 2Mn₄⁻ -> 2MnO₂ + 8H₂O
Now we can add the two half-reactions together to get the balanced redox equation:
5H₂O₂ + 2KMnO₄ + 8H₂SO₄ -> 5O₂ + 2MnSO₄ + K₂SO₄ + 8H₂O
2. To calculate the molarity of the KMnO₄ solution for each trial, we need to use the formula:
Molarity (M) = moles of solute / liters of solution
We'll need to know the mass of KMnO₄ used and the volume of the solution. Let's assume that we used 0.025 g of KMnO₄ and diluted it to a total volume of 100 mL (0.1 L) for each trial.
First, let's convert the mass of KMnO₄ to moles:
0.025 g / 158.034 g/mol = 1.58 x 10⁻⁴ mol
Now we can calculate the molarity:
M = 1.58 x 10⁻⁴ mol / 0.1 L = 0.00158 M
Repeat this calculation for each trial and then average the values to get the average molarity of the KMnO₄ solution.
3. To find the percent by volume of the hydrogen peroxide sample for each trial, we need to use the formula:
% by volume = (volume of H₂O₂ / total volume of solution) x 100%
We'll need to know the density of the hydrogen peroxide to convert its mass to volume. Let's assume that we used 0.5 g of H₂O₂ in each trial.
First, let's convert the mass of H₂O₂ to volume:
0.5 g / 1.00 g/mL = 0.5 mL
Now we can calculate the percent by volume:
% by volume = (0.5 mL / 100 mL) x 100% = 0.5%
Repeat this calculation for each trial and then average the values to get the average percent by volume of the hydrogen peroxide sample.
To know more about redox equation, refer
https://brainly.com/question/21851295
#SPJ11
A solution that is 0.016 M in Na+ can be prepared by adding how many grams of Na2SO4
(MW 142 g) to water and diluting to a final
volume of 130.0 mL?
1. 59 g
2. 0.15 g
3. 0.30 g
4. 0.00015 g
5. 0.0059 g
020
0.15 g of Na₂SO₄ can be added to water and diluting to a final volume of 130.0 mL
What is Molarity?The molarity (M) of a solution is defined as the number of moles of solute per liter of solution.
Equation:Number of moles of solute = Molarity x Volume of solution in liters
The volume of the final solution is given as 130.0 mL, which is 0.1300 L. Therefore, the number of moles of Na+ required can be calculated as:
Number of moles of Na+ = 0.016 M x 0.1300 L
Number of moles of Na+ = 0.00208 moles
Since each mole of Na₂SO₄ produces two moles of Na+, the number of moles of Na₂SO₄ required can be calculated as:
Number of moles of Na₂SO₄ = 0.00208 moles / 2
Number of moles of Na₂SO₄ = 0.00104 moles
Finally, we can calculate the mass of Na₂SO₄ required using its molar mass:
Mass of Na₂SO₄ = Number of moles x Molar mass
Mass of Na₂SO₄ = 0.00104 moles x 142 g/mol
Mass of Na₂SO₄ = 0.1477 g
Therefore, we need to add 0.1477 grams of Na₂SO₄ to water and dilute it to a final volume of 130.0 mL to prepare a 0.016 M solution of Na+.
The closest answer choice is 0.15 g.
To know more about Molarity, click here
https://brainly.com/question/8732513
#SPJ1
What is the purpose of the bromphenol blue stain?
The purpose of the bromphenol blue stain is to allow for the visualization of DNA or protein samples during electrophoresis. It works by binding to the samples and producing a blue color that can be easily seen.
The intensity of the stain can also be used to determine the concentration of the sample. The purpose of the bromphenol blue stain is to serve as a tracking dye during electrophoresis. It helps to monitor the progress of the gel run and visualize the migration of DNA, RNA, or protein samples in the gel. Bromphenol blue stain is negatively charged, allowing it to move in the same direction as the biomolecules, providing a visual reference for the separation process.
learn more about bromphenol here
https://brainly.com/question/31382506
#SPJ11
What is the coefficient of H2SO4 when the following equation is properly balanced?___ Ca3(PO4)2 + ___ H2SO4 ® ___ CaSO4 + ___ H3PO4A) 3 B) 8 C) 10 D) 11 E) none of these
The coefficient of H2SO4 in the balanced equation is 8, and the answer is B) 8.
To balance the given equation:
Ca3(PO4)2 + H2SO4 → CaSO4 + H3PO4
We need to ensure that the number of atoms of each element is the same on both sides of the equation.
First, we can balance the phosphorus and calcium atoms by placing a coefficient of 3 in front of Ca3(PO4)2:
3Ca3(PO4)2 + H2SO4 → CaSO4 + H3PO4
Now, there are 9 oxygen atoms on the left side and only 5 on the right side. To balance the oxygen atoms, we can add a coefficient of 8 in front of H2SO4:
3Ca3(PO4)2 + 8H2SO4 → CaSO4 + H3PO4
Finally, we can balance the hydrogen atoms by placing a coefficient of 2 in front of H3PO4:
3Ca3(PO4)2 + 8H2SO4 → CaSO4 + 2H3PO4.
For such more questions on H2SO4:
https://brainly.com/question/30356536
#SPJ11
Question 54
Which one of the following areas of the United States would be most sensitive to acid precipaitation?
a. Rocky Mountain states
b. Southeast
c. New England
d. Great Plains
The area of the United States that would be most sensitive to acid precipitation is c. New England.
This is because the region has a higher susceptibility to acid rain due to its proximity to major industrial and urban areas that emit high levels of pollutants, as well as its naturally acidic soil and water systems. The acidity of precipitation increases as plants and trees take it up, making the forests of this region particularly susceptible. Additionally, the region's lakes and streams are especially sensitive to acidification, which can damage aquatic life and water quality. Acid precipitation is caused by industrial emissions and car exhaust, which are more concentrated in this region due to its high population density.
To learn more about acid click here https://brainly.com/question/14072179
#SPJ11
what is the mass percent of a solution prepared by dissolving 18.9 grams of solid into 39.5 grams of water? group of answer choices 58.4% 32.4% 47.8% the identity of the compound must be known. none of the above
The mass of the solution is the sum of the mass of the solute (18.9 grams) and the mass of the solvent (39.5 grams), which is 58.4 grams.
Charge separation might be considered to be polarity. As a result, polar solvents are those that can solvate, or dissolve, ions, and also have the ability to separate charges.
Because of its structure, a polar solvent molecule possesses a very tiny electrical charge. Water, which contains two hydrogen atoms and an oxygen atom, is the most normal and frequent example. The two hydrogen atoms and the lone oxygen atom are at an angle. The traditional polar solvent is water. The oxygen atom has a propensity to concentrate electron density around it.
To find the mass percent of the solution, we need to divide the mass of the solute by the mass of the solution and multiply by 100.
Mass percent = (mass of solute ÷ mass of solution) x 100
Mass percent = (18.9 ÷ 58.4) x 100
Mass percent = 32.4%
Therefore, the mass percent of the solution prepared by dissolving 18.9 grams of solid into 39.5 grams of water is 32.4%.
Learn more about solvent here
https://brainly.com/question/15212814
#SPJ11
1. Identify Can you see any clues in the star’s spectrum about which elements are most common in the stars? Explain.
2. Explain Do both stars contain the same lines for all the elements in the table?
3. Evaluate How do the thicker absorption lines of some elements in a star’s spectrum affect the accuracy of your measurements? Is there a way to improve your measurements? Explain.
In the star’s spectrum about which elements are most common in the stars.
1. Yes, the spectrum of a star can provide information about which elements are most common in it.
This is because different elements absorb light at different wavelengths, so the presence of specific absorption lines in the spectrum can indicate which elements are present. For example, if a star's spectrum shows strong absorption lines at wavelengths corresponding to hydrogen and helium, it suggests that these elements are abundant in the star.
2. No, the spectra of the two stars will not necessarily contain the same lines for all the elements in the table.
This is because the composition of each star may differ depending on factors such as age, temperature, and chemical history. However, the spectra may contain some similar lines if the stars have similar compositions.
3.The thicker absorption lines of some elements in a star's spectrum can affect the accuracy of measurements by making it more difficult to accurately measure the strength of the line.
This can lead to errors in determining the abundance of the element in the star. To improve measurements, astronomers can use higher resolution spectroscopy, which allows for finer detail in the spectrum to be observed, or they can use multiple observations and analyze the average to reduce errors.
To know more about star’s spectrum here
https://brainly.com/question/26672435
#SPJ1
1 A is an alcohol that has the following percentage composition by mass: carbon 60.0%, hydrogen 13.3% and oxygen 26.7%.
[Ar values: C = 12.0, H = 1.0, O = 16.0]
a i Calculate the empirical formula of A. [2]
ii The molecular mass of A is 60. Calculate its molecular formula. [1]
b Give the structural formulae of the isomers of A. [2]
c If A is heated with a mixture of sulfuric acid and potassium dichromate(VI), there is
a colour change and propan2one is formed. Identify A and explain your answer. [2]
d Give the structural formulae for the organic products from the reaction of A with the following reagents:
i heated pumice or concentrated sulfuric acid [1]
ii ethanoic acid in the presence of an acid catalyst. [1]
2 B and C are isomeric alcohols with the molecular formula C4H10O.
a Draw the four skeletal formulae for the isomeric alcohols with this molecular formula. [4]
b When B is heated with a mixture of sulfuric acid and potassium dichromate(VI), there
is no change in colour.
i Identify B and explain your answer. [2]
ii Give the name, and the structural and skeletal formulae, of the alkene formed
when B is dehydrated. [3]
c When C is passed over heated pumice, it gives the same alkene as B does.
i Give the structural formula and name of C. [2]
ii What is formed when C is refluxed with an excess of acidified potassium
dichromate(VI) mixture? [1]
iii Explain the term reflux. [1]
3 D has the following percentage composition by mass: 53.3% carbon, 11.1% hydrogen and 35.6% oxygen.
[Ar values: C = 12.0, H = 1.0, O = 16.0]
a i Calculate the empirical formula of D. [2] ii The relative molecular mass of D is 90. What is its molecular formula?
Show your working.
b D is a diol. What does the term diol mean?
[2] [1]
a 50.00 ml sample of water is titrated with 0.0200 m hcl to the methyl orange end point. the titration requires 3.97 ml to reach the endpoint. calculate the total alkalinity expressed as mg caco3/l.
The total alkalinity expressed as mg CaCO₃/L is 158.86 mg CaCO₃/L.
To calculate the total alkalinity of the water sample expressed as mg CaCO₃/L, you can follow these steps:
1. Determine the moles of HCl used in the titration:
moles of HCl = (volume of HCl) × (concentration of HCl)
moles of HCl = (3.97 mL) × (0.0200 mol/L)
moles of HCl = 0.0794 mmol (Note: Convert mL to L by dividing by 1000)
2. Assume that the moles of HCl are equal to the moles of CaCO₃ since they react in a 1:1 ratio in the titration.
3. Calculate the mass of CaCO₃:
mass of CaCO₃ = (moles of CaCO₃) × (molar mass of CaCO₃)
mass of CaCO₃ = (0.0794 mmol) × (100.09 g/mol)
mass of CaCO₃ = 7.943 mg
4. Determine the total alkalinity expressed as mg CaCO₃/L:
total alkalinity = (mass of CaCO₃) × (1000 mL/volume of water sample)
total alkalinity = (7.943 mg) × (1000 mL / 50.00 mL)
total alkalinity = 158.86 mg CaCO₃/L
So, the total alkalinity of the water sample is 158.86 mg CaCO₃/L.
Learn more about alkalinity here: https://brainly.com/question/31463506
#SPJ11
The ksp for baco3 is 5.1×10^−9. How many grams of baco3 will dissolve in 1000. ml of water?
The amount of barium carbonate BaCO₃ that will dissolve in 1000 mL of water with a Ksp of 5.1×10⁻⁹ is 2.3×10⁻⁵ grams.
The equilibrium constant expression for the dissolution of BaCO₃ in water is:
Ksp = [Ba²⁺][CO₃²⁻]
We can assume that the concentration of Ba²⁺ and CO₃²⁻ in the saturated solution are equal and can be represented by x. Therefore, the equilibrium constant expression becomes:
Ksp = x²
Rearranging this equation, we get:
x = √Ksp = √(5.1×10⁻⁹) = 7.14×10⁻⁵ M
Since the volume of the solution is 1000 mL or 1 L, the number of moles of BaCO₃ that will dissolve is:
moles of BaCO₃ = concentration × volume = 7.14×10⁻⁵ M × 1 L = 7.14×10⁻⁵ moles
Finally, we can calculate the mass of BaCO₃ that will dissolve using its molar mass (197.34 g/mol):
mass of BaCO₃ = moles of BaCO₃ × molar mass = 7.14×10⁻⁵ moles × 197.34 g/mol = 2.3×10⁻⁵ grams.
learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
Tetrafluoroethene is made from chlorodifluoromethane in this reversible reaction. 2 CHCIF₂(g) = C₂F4(g) + 2HCl(g) AH = +128 kJ mol¹ A 2.00 mol sample of CHCIF₂ is placed in a container of volume 23.2 dm³ and heated. When equilibrium is reached, the mixture contains 0.270 mol of CHCIF2 Calculate the amount, in moles, of C₂F4 and of HCI in the equilibrium mixture.
Answer:
Let the amount of C₂F4 and HCl produced at equilibrium be x mol.
Using the stoichiometry of the balanced chemical equation, we can write the equilibrium expression for the reaction as follows:
Kc = ([C₂F4][HCl]²) / [CHCIF₂]²
where Kc is the equilibrium constant, [C₂F4], [HCl], and [CHCIF₂] are the equilibrium concentrations of each species in mol dm⁻³.
At equilibrium, the concentration of CHCIF₂ is 0.270 mol / 23.2 dm³ = 0.0116 mol dm⁻³.
We can use the equilibrium expression and the given equilibrium constant to solve for the concentrations of C₂F4 and HCl at equilibrium:
Kc = ([C₂F4][HCl]²) / [CHCIF₂]²
128 × 10³ = (x)(2x²) / (0.0116)²
Solving for x, we get:
x = 0.153 mol
Therefore, at equilibrium, the amount of C₂F4 produced is 0.153 mol and the amount of HCl produced is 0.306 mol (twice the amount of C₂F4, according to the stoichiometry of the balanced chemical equation).
Question 24
Which contaminant in water is associated with methemoglobinemia?
a. zinc
b. lead
c. copper
d. nitrate
The contaminant in water that is associated with methemoglobinemia is nitrate.
Methemoglobinemia is a condition caused by elevated levels of nitrate in drinking water, which can lead to a decrease in oxygen levels in the blood. Nitrates can enter drinking water sources through fertilizer runoff and sewage contamination. It is important to test drinking water regularly to ensure nitrate levels are not elevated.Methemoglobin is an abnormal form of hemoglobin, the protein that carries oxygen in red blood cells. High levels of nitrate can interfere with the normal oxygen-carrying capacity of red blood cells, leading to symptoms such as shortness of breath, fatigue, dizziness, and blue skin discoloration.
learn more about nitrate Refer: https://brainly.com/question/5346392
#SPJ11
In the dibenzalacetone synthesis, what product (give product's name) is formed when the rxn mixture goes froma clearyellow soln to forming a yellow precipitate?
When the reaction mixture in dibenzalacetone synthesis goes from a clear yellow solution to forming a yellow precipitate, the product formed is dibenzalacetone.
The yellow precipitate is actually the dibenzalacetone that has been formed during the reaction.
In the synthesis of dibenzalacetone, when the reaction mixture changes from a clear yellow solution to forming a yellow precipitate, the product formed is called "dibenzalacetone" itself.
The formation of the yellow precipitate indicates the successful synthesis of dibenzalacetone from the mixture.
To know more about Dibenzalacetone click here .
brainly.com/question/19340462
#SPJ11
Amino acids that are usually positive, i.e. Protonated, at physiological pH
There are several amino acids that are usually positive, or protonated, at physiological pH, which is around 7.4. These include histidine, lysine, and arginine.
Histidine has a side chain with a pKa of approximately 6.0, which means that at physiological pH, about half of the histidine molecules will be protonated and carry a positive charge. Lysine and arginine have side chains with even higher pKa values, around 10.8 and 12.5, respectively. As a result, almost all of the lysine and arginine molecules in a physiological environment will be protonated and positively charged. These positively charged amino acids play important roles in protein structure and function, as well as in enzyme catalysis and ion transport across cell membranes.
Amino acids that are usually positive or protonated at physiological pH (around 7.4) are lysine, arginine, and histidine. These amino acids contain basic side chains which can accept protons, making them positively charged under physiological conditions.
Visit here to learn more about amino acids brainly.com/question/28409615
#SPJ11
560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be __ 2Kelvin.
The initial and final pressures are not given, we cannot determine the exact value of [tex]T_{2}[/tex]without that information. The pressure values would be needed to complete the calculation.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance, such as a gas, liquid, or solid. It is a scalar quantity that quantifies the degree of hotness or coldness of a substance. Temperature is typically measured using various scales, such as Celsius, Fahrenheit, or Kelvin.
The new temperature of the gas after compression can be calculated using the combined gas law, which relates the initial and final conditions of a gas undergoing a change in pressure, volume, and temperature.
The combined gas law is given by:
We can rearrange the equation to solve for [tex]T_{2}[/tex]:
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
560 mL of gas is at 43.0 C. It is compressed to a volume of 52.0 mL. The new temperature of the gas will be 277.05K
What is ideal gas law ?
The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is considered to be ideal if its particles (a) do not interact with one another and (b) occupy no space (have no volume).
The law states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of a single gram of an ideal gas.
V1/T1 ⇒ V2/T2
V1 ⇒ 560ml
T1 ⇒ 43.0 C
V2 ⇒ 52ml
T2⇒?
T2 ⇒ V2T1/V1
T2 ⇒ 52*43/560
T2 ⇒ 3.9 degree C i.e. 277.05K
To learn more about ideal gas law use:
https://brainly.com/question/1056445
#SPJ1
Which of these atoms in the ground state has the greatest number of electron shells containing electrons?
1) Cs-132
2) I-127
3) Xe-134
4) Na-23
Xe-134 has 6 electron shells containing electrons.
What do you mean by electron?
A negatively charged subatomic particle known as an electron can be free (not bound) or bound to an atom. One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons together.
An electron formula is what?With the aid of dots, the electron dot formula displays the number of valence electrons for that element. The electrons with the highest energy level are known as valence electrons. The periodic table can be used to get it. For instance, group IA of the chemical periodic table contains elements with a single valence electron.
To know more about electrons visit:
brainly.com/question/1255220
#SPJ1
you adjust the ph to 7.0. you then add 0.005 moles of naoh. draw the structure(s) of the ionic species of glycine present in the solution and indicate the proportion of each species. d. what is the approximate ph of the solution in part c? e. would the solution be a good buffer? explain
A good buffer solution can maintain a relatively constant pH when small amounts of acid or base are added. In this case, the solution contains both the zwitterion and its conjugate base, meaning it has some buffering capacity.
It seems you would like to know the ionic species of glycine after adjusting the pH to 7.0 and adding 0.005 moles of NaOH, the approximate pH after this addition, and if the solution would be a good buffer.
d. Glycine is an amino acid with the molecular formula NH₂CH₂COOH. At pH 7.0, glycine predominantly exists as a zwitterion: NH³⁺(CH₂)COO⁻. When you add 0.005 moles of NaOH, it will react with the acidic carboxyl group, converting it into its conjugate base, resulting in the following ionic species: NH₃⁺(CH2)COO⁻ (zwitterion) and NH₂(CH₂)COO⁻(conjugate base).
e. After the addition of NaOH, the pH will increase slightly due to the consumption of protons. The exact pH depends on the initial concentration of glycine and the buffering capacity of the solution.
However, without knowing the exact concentrations and pKa values of the components, it's difficult to determine if the solution would be an ideal buffer.
Learn more about conjugate base here
https://brainly.com/question/28545620
#SPJ11
4.8. The purpose of galvanizing iron and steel is to A. eliminate all corrosion.
B. protect against deterioration. C. prevent galvanic action.
D. provide a more attractive finish.
The correct option is B. protect against deterioration. The process of galvanizing involves coating iron or steel with a layer of zinc to protect it from rust and other forms of corrosion.
This helps to extend the lifespan of the metal and keep it looking good over time. Galvanizing is a common technique used in a variety of industries, from construction to automotive manufacturing, to ensure the durability and longevity of metal components. Galvanizing is a process of coating the surface of iron or steel with a layer of zinc and this layer acts as an effective barrier that prevents oxygen and water from coming in contact with the underlying metal, reducing the rate of corrosion.
It also provides a more attractive finish and prevents galvanic action, where two different types of metals react with each other and cause corrosion. Galvanizing is an effective way to extend the life of iron and steel products and can help reduce the cost of maintenance.
To learn more about corrosion click here https://brainly.com/question/31313074
#SPJ11