The resultant normal load on the beam is 31.42 N. Assuming that the circular beam is made of a homogeneous material with a constant cross-sectional area and the load is applied uniformly on its circumference, we can use the following equations to obtain the resultant moment and shear force:
1. Resultant moment (M):
M = (pi/2) * q * r^2 * sin(2O)
where q is the load intensity per unit length of the beam, r is the radius of the beam, and O is the angle of the load measured from a reference direction (e.g. the x-axis).
2. Resultant shear force (V):
V = 2 * q * r * cos(O)
where factor 2 accounts for the load being applied on the entire circumference of the beam.
To apply these equations to your specific case where O=10 degrees, we need to know the load intensity q and the radius r of the beam. Let's assume that q = 10 N/m and r = 0.5 m (you can adjust these values based on your specific scenario). Then, we can plug these values into the above equations to get:
M = (pi/2) * 10 * 0.5^2 * sin(2*10) = 1.25 Nm
V = 2 * 10 * 0.5 * cos(10) = 19.32 N
Note that the moment is a vector quantity with a direction perpendicular to the plane of the beam, while the shear force is a vector quantity with a direction tangential to the beam circumference.
Finally, to obtain the resultant normal load on the beam, we need to use the equation for the total force acting on the beam:
F = 2 * pi * r * q
where the factor 2pi accounts for the load being applied on the entire circumference of the beam. Plugging in our assumed values of q and r, we get:
F = 2 * pi * 0.5 * 10 = 31.42 N
Therefore, the resultant normal load on the beam is 31.42 N.
Here is a step-by-step method to find the resultant moment and shear force for a normally distributed load applied on a circular beam when O=10 degrees;
1. Determine the magnitude of the distributed load (w) acting on the circular beam.
2. Calculate the length of the circular beam segment (L) that is affected by the distributed load.
3. Find the total normal load (N) on the beam, which can be calculated using the formula N = w * L.
4. Determine the location of the resultant normal load on the beam.
5. Calculate the shear force (V) at the point of interest. This can be calculated using the formula V = N * sin(O), where O = 10 degrees.
6. Calculate the moment (M) at the point of interest. This can be calculated using the formula M = N * L * cos(O).
By following these steps, you will obtain the resultant moment and shear force for the normally distributed load applied on the circular beam when O=10 degrees and the resultant normal load on the beam.
Learn more about beam
https://brainly.com/question/14228527
#SPJ11
Analog signals from sensors are changed to digital signals for processing by the computer through which type of circuit?
Analog signals from sensors are changed to digital signals for processing by the computer through analog to digital converter circuit.
What is a Circuit?This is referred to as a path in which electric current flows and comprises of components such as resistor, capacitor etc.On the other hand, analog to digital converter circuit is responsible for the conversion of the analog signals to digital or binary forms and is read through the use of a microcontroller.
The digital signal is what is in vogue as of today due to its synergy with modern electric devices which are common in today's world which explains the need for the conversion to this type of signal.
This is therefore the reason why analog to digital converter circuit was chosen as the most appropriate choice in this type of scenario.
Read more about Analog to digital converter here https://brainly.com/question/24750760
#SPJ1
Barry slides across an icy pond. The coefficient of kinetic friction between his
shoes and the ice is 0.15. If his mass is 83 kg, what is the force of friction
acting on him?
OA. 813 N
B. 1150 N
C. 122 N
D. 352 N
The force of friction acting on him is 122 N. The correct answer is option C
What is Friction ?Friction is a force that opposes the motion of a static or a moving object.
Given that Barry slides across an icy pond. The coefficient of kinetic friction between his shoes and the ice is 0.15. If his mass is 83 kg
The given parameters are;
Mass m = 83 kgCoefficient of kinetic friction μ = 0.15Frictional force [tex]F_{r}[/tex] = ?The normal reaction N on the body = mg
N = 83 x 9.8
N = 813.4 N
The Frictional force formula is [tex]F_{r}[/tex] = μN
[tex]F_{r}[/tex] = 0.15 x 813.4
[tex]F_{r}[/tex] = 122.01 N
Therefore, the force of friction acting on him is 122 N approximately.
Learn more about Friction here: https://brainly.com/question/24338873
#SPJ1
Using the criteria you described in your previous answer, how would you compare solar power to fossil fuel power?
Solar power differ to fossil fuel power in that solar power is a much more optimal resource than fossil fuels
Solar power; however provides much more energy than fossil fuel powerInterestingly too, solar power resource can be used without releasing greenhouse gases compared to fossil fuels powerInfact, solar energy is the most reliable What is renewable energy?Renewable energy simply refers to energy that is not depleted when used. An example of such is solar power.
So therefore, solar power differ to fossil fuel power in that solar power is a much more optimal resource than fossil fuels
Learn more about renewable energy:
https://brainly.com/question/79953
#SPJ1
derric climbs onto his roof to hang Christmas light. If the roof is 4.3 meters from the ground and derrick gains 2730 J of potential energy while climbing, what is his mass
Mass of Derrick at a height 4.3 m having 2730 joule of energy is 65 Kg.
What is the expression of gravitational potential energy near the earth surface?Mathematically, gravitational potential energy near the earth surface= m×g×hm= mass of Derrick, g= acceleration due to gravity, h= height at which Derrick present Then, mass (m) of Derrick = potential energy/ (g×h)What is the mass of Derrick, if he gains 2730 joule of energy at 4.3m above the ground?Mass of Derrick= 2730/(9.8×4.3)
= 65 kg
Thus, we can conclude that the mass of Derrick is 65 Kg.
Learn more about the gravitational potential energy here:
brainly.com/question/26588957
#SPJ1
What is the kinetic energy of an object with a mass of 10 kilograms traveling at a speed of 10 meters per second? Assume that no other forces act upon the object.
Group of answer choices
a. 50,000 J
b. 100 J
c. 500 J
d. 1000 J
The kinetic energy of an object with a mass of 10 kilograms traveling at a speed of 10 meters per second is 500J (option C).
How to calculate kinetic energy?The kinetic energy of a body refers to the energy due to the motion of the body. The kinetic energy can be calculated using the following formula:
K.E = ½ × m × v²
Where;
K.E = kinetic energym = massv = speedK.E = ½ × 10 × 10²
K.E = 5 × 100 = 500J
Therefore, the kinetic energy of an object with a mass of 10 kilograms traveling at a speed of 10 meters per second is 500J.
Learn more about kinetic energy at: https://brainly.com/question/12669551
#SPJ1
if the force acting on a body of mass 40 kg is doubled . by how much will the acceleration change
Dr. Albert gets a spark from the static in the door knob. He is not hurt. However, the electric _____ is high.
Dr. Albert gets a spark from the static in the door knob. He is not hurt. However, the electric current is high.
What is the static spark?
Sparks that are considered "static" have a massive momentary current and power (momentary like less than a millionth of a second.) However, the overall wattage of these sparks is exceedingly low. It's really too little to harm your muscles with heat (or even any warming a thermometer could detect.)
Negative and positive charges in an object must balance out for static electricity to occur. These charges may accumulate on an object's surface until they can be released or discharged. They can be discharged via a circuit, for example.
Learn more about static spark here:
https://brainly.com/question/4045527
#SPJ4
An energy storage system based on a flywheel (a rotating disk) can store a maximum of 3.7 MJ when the flywheel is rotating at 16000 revolutions per minute.
The moment of inertia of the flywheel is 2.63 kg-[tex]m^{2}[/tex]
It is given that,
The maximum energy stored on the flywheel is given as
E=3.7MJ= 3.7×[tex]10^{6}[/tex] J
Angular velocity of the flywheel is 16000[tex]\frac{rev}{min}[/tex] = 1675.51[tex]\frac{rad}{sec}[/tex]
So to find the moment of inertia of the flywheel. The energy of a flywheel in rotational kinematics is given by :
E = [tex]\frac{1}{2}[/tex][tex]Iw^{2}[/tex]
By rearranging the equation:
I = [tex]\frac{2E}{w_{2} }[/tex]
I = 2.63 kg-[tex]m^{2}[/tex]
Thus the moment of inertia of the flywheel is 2.63 kg-[tex]m^{2}[/tex].
Learn more about moment of inertia here;
https://brainly.com/question/13449336
#SPJ4
Clouds lose their __________ when the surrounding air temperature equals the rising air temperature.
Clouds lose their stability when the surrounding air temperature equals the rising air temperature.
When vapor condenses and produces the billowing columns, the ascending air, which is still warmer than the nearby air, rises. occurs when radiation even during night cools the Earth's surface as well as the air around.
As a result, the air parcel can increase until all of the latent heat has already been released as well as the "surplus" water vapor has condensed. Hence, the fundamental factor that prevents clouds from rising is the cessation of the production of heat transfer through condensation.
To know more about air.
https://brainly.com/question/19368011
#SPJ4
The same bungee jumper from the previous question is now safely back on the ground, but hungry. He eats an apple before going for another jump. What energy transfer is he experiencing?
Group of answer choices
a. Kinetic to chemical
b. Elastic potential to chemical
c. Chemical to gravitational potential
d. Chemical to kinetic
D. The energy transfer he is experiencing is Chemical to kinetic.
Conservation of energy
The principle of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.
The apple eaten by the bungee jumper will provide chemical energy which will be converted into kinetic energy of the jumper once he is in motion.
Thus, the energy transfer he is experiencing is Chemical to kinetic.
Learn more about kinetic energy here: https://brainly.com/question/25959744
#SPJ1
Which type of graph could be easily converted into a pie chart?
A. Variable plot
B. Scatter plot
C. Bar graph
D. Line graph
Answer:
D.Linegraph
Explanation:
Linegraph could be easily converted into a pie chart
Answer:
bar graph
Explanation:
One similarity in the spectra of T dwarf stars and giant planets in our solar system is that their spectra show:
One similarity in the spectra of T dwarf stars and giant planets in our solar system is that their spectra show: "Indications of methane"
What is solar system?The solar system is made up of planets, moon, asteroids, comets, dust, and gas that revolve around the sun, which is our nearest star.
It consists of the giant planets Jupiter and Saturn, the ice giant Uranus and Neptune, and the rocky core planets Mercury, Venus, Earth, and Mars.
Some key points of solar system are-
The solar nebula, a massive cloud of gas and dust, began to collapse in on itself some some 4.6 billion years ago, forming the solar system's star and planets. Scientists have used meteorites, or bits of space rock which have fallen on Earth, to determine the age of the universe. Some of these tiny fragments, which have fallen off of planets or moons, can provide intriguing scientific data regarding the makeup and past of their parent body. Since the beginning of the solar system, before the planet even existed, others have been orbiting the sun. The oldest meteorite is 4.55 billion years old and came to Earth in the Allende meteor, which was dispersed over Mexico in 1969.To know more about Our Solar System, here
https://brainly.com/question/13979351
#SPJ4
A canister filled with 1.3 mol of single-atom helium gas has a temperature of 315 K. What is the approximate total internal energy of the gas? (Recall that the equation for kinetic energy due to translation in a gas is: 3/2 nRT; the equation for kinetic energy due to rotation of a molecule in a gas is: nRT; and R = 8.31 J/(mol.K).)
The total internal energy of the gas is 5104 Joule.
What is the internal energy of n mole of monoatomic gases?Internal energy= f/2 × nRTf = degrees of freedom, R= universal gas constant with value 8.31 J/(mol K), T= temperatureFor mono-atomic gas, degrees of freedom is 3. So internal energy= 3/2× nRTWhat is the internal energy of 1.3 mole of helium at 315K temperature?Internal energy of helium gas=
3/2 × 1.3 × 8.31 × 315
= 5104 joule
Thus, we can conclude that the internal energy of the helium gas is 5104 Joule.
Learn more about the internal energy here:
brainly.com/question/23876012
#SPJ1
When attempting to recover your primary second stage underwater, it is acceptable to switch to your alternate air source while you search for your primary. Select one: True False
During primary second stage underwater recovery, it is acceptable to switch to your alternate air source while you search for your primary which makes it a true statement.
What is Primary second stage underwater?This involves the intermediate pressure air from the regulator hose being taken and reduced to ambient pressure.
Switching to your alternate air source will ensure that the diver breathe safely which is why True was chosen.
Read more about Primary second stage underwater here https://brainly.com/question/17315714
#SPJ1
What’s your favorite stranger things character.
Answer:
none
Explanation:
stranger mid mid mid mid
Answer:
My favorite stranger things character is Eleven also known as Millie Bobby Brown
Explanation:
I hope this helps and have a good day!
The forces in (Figure 1) are acting on a 1.0 kg object.What is ax , the x -component of the object's acceleration
The x -component of the object's acceleration is 2 m/s².
What's the resultant force along x- direction?Forces along x axis direction are as follows 4N along +x axis, so it's taken as +4 N2N along -x axis , so it's taken as -2N.Resultant force along x direction = 4N - 2N = 2 N which is along + ve x direction.What's the acceleration along x axis direction?As per Newton's second law, Force = mass × acceleration of the object Force along x axis= mass × acceleration along x axis= 2NAcceleration = 2/ mass = 2/1 = 2 m/s²Thus, we can conclude that the acceleration along x axis is 2 m/s².
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: The forces in (Figure 1) are acting on a 1.0 kg object. What is ax, the x-component of the object's acceleration?
Learn more about the acceleration here:
brainly.com/question/460763
#SPJ1
A coin slides over a frictionless plane and across an xy coordinate system from the origin to a point with xy coordinates (3.0 m, 4.0 m) while a constant force acts on it. The force has magnitude 2.0 N and is directed at a counterclockwise angle of 100 from the positive direction of the x axis. How much work is done by the force on the coin during the displacement
Work done by the force is 6.802 Joule
Given:
Therefore displacement of coin along x axis,x=3m
displacement of coin along y-axis,y=4m
force has magnitude = 2.0 N
To Find:
Work done by the force
Solution: Work is done whenever a force moves something over a distance. You can calculate the energy transferred, or work done, by multiplying the force by the distance moved in the direction of the force.
component of force along x-axis, F = 2.0Ncos100
F = 2x(-.173)
F = -(.346)N
component of force in y direction,F₁ = 2.0sin100
F = 2x(.98)
F = 1.96N
work is done by the force on the coin during the displacement will be given as
W = Fx*x + Fy*y
W = -(.346) x 3m + 1.96 x 4
W = 6.802 Joule
Hence, Work done by the force is 6.802 Joule
Learn more about Work done here:
https://brainly.com/question/18762601
#SPJ4
A person sits at rest on a chair. The gravitational force on the person (their weight) is one half of an action-reaction pair. Which force is the other half?
Normal is the other half of an action-reaction pair
If a person is sitting on a chair , there must be a gravitation force acting in downward direction which is equal to the weight of that person . That means the person is exerting a force on the chair equal to its weight . But the person is not falling down the chair , because of newtons third law of motion .
There must be a counter force which is equal and opposite to the force exerted by the person on the chair , in order to make net force equal to zero and to make that man in stationary state ( no movement ) .That force is called Normal force which is been acted by the chair on the person .This implies Normal is the other half of an action-reaction pair
learn more about Force:
https://brainly.com/question/14110395?referrer=searchResults
#SPJ4
The volume of gas in a flexible container at a depth of 10 m/33 ft will expand to ______ its original volume if taken to the surface. Select one: Twice. Three times. Four times. None of the above.
The volume of gas in a flexible container at a depth of 10 m/33 ft will expand to double its original volume if taken to the surface.
What is volume:
The amount of space that a substance or object occupies.
Volume is denoted with letter V
What is a gas molecule?Generally, a gas molecule is simply defined as a combination of numbers of atoms that are connected one to another.
here, 10 m/33 feet of sea water is taken to exerts a gauge pressure that is the same pressure as the atmosphere.
This means that we add one atmosphere/bar pressure for every 10 m/33 feet you descend.
The effect of this is that,
at 10 m/33 ft absolute pressure is two ata/bar
Adding another 10 m/33 ft to this depth to make it 20 m/66 ft, puts you under under three ata/bar of pressure and so on.
Descending to a depth it means that you have double the ata/bar pressure acting on you. If you decide to resurface, the pressure on the flexible container will reduce by a factor of two.
Since volume is inversely proportional to the pressure,
If the pressure reduces by a factor of 2, then the volume will increase by a factor of two.
Learn more about volume of gas here:
https://brainly.com/question/17328636
#SPJ4
g The resistance of the wire in the windings of an electric starter motor for an automobile is 2.40 10-2 . The motor is connected to a 13-V battery. What current will flow through the motor when it is stalled (does not turn)
If the resistance of the wire in the windings of an electric starter motor for an automobile is [tex]2.40\times 10^{-2}\text{ } \Omega[/tex] and the motor is connected to a 13-V battery then the amount of current flow through the motor is [tex]5.42 \times10^2\text{ A}[/tex].
Calculation:
Step-1:
It is given that the resistance of the wire in the windings of an electric starter motor for an automobile is [tex]2.40\times 10^{-2}\text{ } \Omega[/tex] and the motor is connected to a 13-V battery. It is required to find the amount of current flow through the motor.
It is known from Ohm's law, it is known that voltage is the multiplication of the current and the resistance of a circuit.
V=IR
Where V is the voltage, I is current, and R is the resistance.
Step-2:
Substituting the given values into the equation to get the value of the current.
[tex]$$\\\begin{aligned}\\V&=IR\\\Rightarrow13 \text{ V}&=I \times 2.40\times10^{-2} \text{ }\Omega\\\Rightarrow I&=\frac{13}{2.40\times10^{-2}} \text{ A}\\ &=5.42 \times10^2\text{ A}\\\end{aligned}\\$$[/tex]
Learn more about battery, current and resistance here,
https://brainly.com/question/14996728
#SPJ4
Jim climbs up a rope from an initial height of 1.30 m to a final height of 3.20 m. If Jim's mass is 45 kg, what is the change in his gravitational potential energy? Group of answer choices 1980 J 187 J 85.5 J 838 J
The change in the gravitational potential energy of the boy is 838 J.
So the correct choice is 838 J.
What is gravitational potential energy?
The energy possessed by an object due to its position from the chosen reference point when gravity is acting on that object is called gravitational potential energy.
The formula to calculate the difference in the potential energy is given by the formula,
U=m*g*h
where U is the difference in the potential energy, m is the mass, g is the acceleration due to gravity, and h is the height difference between the initial height and the final height.
The height difference is given by the formula,
h=h2-h1
where h2 is the final height and h1 is the initial height.
Given that the initial height is 1.30 m and the final height is 3.20 m, substitute h1=1.30 m and h2=3.20 m in the formula of height to calculate the height difference.
h=3.20-1.30
h=1.90 m
The mass of the boy is 45 kg and the value of g is 9.8 m/s^2. Substitute m=45 kg, g=9.8 m/s^2, and h=1.90 m in the formula of the gravitational potential energy to calculate the difference in the gravitational potential energy.
U=45*9.8*1.90
U=837.9 J
U≈838
Learn more about the gravitational potential energy:
https://brainly.com/question/16155035
#SPJ4
A force of 50 n is used to push a wheelchair forward at constant velocity. if the wheelchair is displaced 0.5 m each second, what is the mechanical power expended when transporting the wheelchair?
The mechanical power expended when transporting the wheelchair is 25 Watts
What is power?Power is defined as the amount of energy transferred or converted per unit time. The unit of power is measured in Watts. The higher units are kilowatts, megawatts etc.
The formula for calculating the power expended is expressed as:
Power = Workdone/Time
Since workdone = force * distance, the formula for power will be:
Power = Force*distance/Time
Given the following parameters
Force = 50N
distance = 0.5m
time = 1 second
Substitute to determine the power
Power = 50*0.5/1
Power = 25/1
Power = 25Watts
Hence the mechanical power expended when transporting the wheelchair is 25 Watts
Learn more on power here; https://brainly.com/question/24858512
#SPJ1
Two celestial objects are in space: one with a mass of 8.22 x 109 kg and one with a mass of 1.38 x 108 kg. If they are separated by a distance of 1.43 km, what is the magnitude of the force of attraction (in newtons) between the objects
Answer: Two celestial objects are in space: one with a mass of 8.22 x 109 kg and one with a mass of 1.38 x 108 kg. If they are separated by a distance of 1.43 km, then, the magnitude of the force of attraction (in newtons) between the objects will be 52.9kN
Explanation: To find the answer we need to know more about the Newton's law of gravitation.
What is Newton's law of gravitation?Gravitation is the force of attraction between any two bodies.Every body in the universe attracts every other body with a force.This force is directly proportional to the product of their masses and inversely proportional to the square of the distance between these two masses.Mathematically we can expressed it as,[tex]F=\frac{GMm}{r^2} \\where, G=6.67*10^-11Nm^2kg^-2[/tex]
How to solve the problem?Here, we have given with the data's,[tex]M=8.22*10^9kg\\m=1.38*10^8 kg\\r=1.43*10^3m[/tex]
Thus, the force of attraction between these two bodies will be,[tex]F=6.67*10^-11*\frac{8.22*10^9*1.38*10^8}{1.43*10^3} =52.9kN[/tex]
Thus, if two celestial objects are in space: one with a mass of 8.22 x 109 kg and one with a mass of 1.38 x 108 kg and, If they are separated by a distance of 1.43 km, then, the magnitude of the force of attraction (in newtons) between the objects will be 52.9kN.
Learn more about the Newton's law of gravitation here:
https://brainly.com/question/28045318
#SPJ4
What is the term for the principal that an object in motion remains in motion until it is met by an outside force?
The term for the principal that an object in motion remains in motion until it is met by an outside force is called inertia
Newton's first law states that if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force .This principal is named as inertia .
Every matter have inertia , a property to remain in that very position until unless it is been forced on them to change their position .
Inertia is a property of matter that causes it to resist changes in velocity (speed and/or direction). According to Newton's first law of motion, an object with a given velocity maintains that velocity unless acted on by an external force. Inertia is the property of matter that makes this law hold true.
To learn more about inertia here
https://brainly.com/question/1358512?referrer=searchResults
#SPJ4
A copper penny has a mass of 3.0 g. A total of 4.0 × 10^12 electrons are transferred from one neutral penny to another. If the electrostatic force of attraction between the pennies is equal to the weight of a penny, what is the separation between them?
Then the separation between the two pennies will be O.354m.
To find the correct answer, we need to know about the electrostatic force of attraction.
What is the separation between the pennies?We have given with the information's,[tex]m=3*10^{-3}kg\\n=4*10^{12}\\[/tex]
As we know that the charge of one electron is 1.6×10^-19C.Thus, the total charge on the penny will be,[tex]Q_1=4*10^{12}*1.6*10^{-19}=6.4*10^{-7}C.\\Q_2=-Q_1[/tex]
We have the expression for electrostatic force of attraction as,[tex]F_e=\frac{kQ_1Q_2}{r^2} =mg\\[/tex] , here given that the electrostatic force equal to the weight of the system.
We have to find the separation between the pennies.[tex]r=\sqrt{\frac{kQ_1Q_2}{mg} } =\sqrt{\frac{(6.4*10^{-7})^2}{4*3.14*8.85*10^{-12}*3*10^{-3}*9.8} }\\\\r=0.354m[/tex]
Thus, we can conclude that the separation between the pennies is 0.354m.
Learn more about the electrostatic force here:
https://brainly.com/question/28108740
#SPJ1
0.354m will be the separation between the two pennies.
We must understand the electrostatic force of attraction in order to arrive at the correct solution.
How far apart are the pennies from one another?One electron has a charge of 1.6 10-19 coulombs, as is common knowledge. Consequently, the total fee for the penny will be,[tex]Q_1=ne=4*10^{12}*1.67*10^{-19}=6.4*10^{-7}C\\Q_2=-Q_1[/tex]
The expression of electrostatic force of attraction is as follows:[tex]F=\frac{kQ_1Q_2}{R^2}=mg[/tex]
Given that the electrostatic force in this instance is equal to the system's weight.
We must determine the distance between the pennies.[tex]R=\sqrt{\frac{kQ_1Q_2}{mg} } =0.354m[/tex]
As a result, we may say that the distance between the pennies is 0.354m.
Learn more about electrostatic force here:
https://brainly.com/question/28108740
#SPJ1
Question 5 of 32
According to the periodic table below, which element has the largest average
atomic mass?
OA. Helium (He)
OB. Oxygen (0)
OC. Nitrogen (N)
OD. Neon (Ne)
___________ is defined as intentionally directing someone to or away from specific areas based on the ethnicity of the person or the area.
Steering is defined as intentionally directing someone to or away from specific areas based on the ethnicity of the person or the area.
There are generally three terms used in real estate and that are Steering, Redlining and Blockbusting.
Buyers are guided by steering according to their class.
Redlining mainly refers to the loan industry's discrimination against purchasers.
Blockbusting is the practice of persuading residents of a neighborhood to sell their home because the socioeconomics of the area are deteriorating.
Steering is the act of influencing a buyer's selection of a community based on one of the racial, ethnic, religious, gender, familial, or national origin protected categories listed in the Fair Housing Act.
Hence, Steering is defined as intentionally directing someone to or away from specific areas based on the ethnicity of the person or the area.
Learn more about Ethnicity here https://brainly.com/question/27129680
#SPJ1
An object placed 10.40 cm from a concave spherical mirror produces a real image 7.80 cm from the mirror. If the object is moved to a new position 20.0 cm from the mirror, what is the position of the image
The position of the image, if the object moved to new position 20.0 cm from the mirror is 5.7372 cm.
As per the lens equation,
[tex]\frac{1}{p1} +\frac{1}{q1} =\frac{1}{f}[/tex]
Since, p1 is the position of object initially, q1 is the position of the image initially and f is the focal length of the lens.
[tex]\frac{1}{10.4} +\frac{1}{7.8} =\frac{1}{f}[/tex]
[tex]0.0961+0.1282=\frac{1}{f}[/tex]
[tex]f=4.458[/tex] is the focal length of the given lens.
Then the object moved to second position of p2=20.0 cm from the mirror.
So, [tex]\frac{1}{p2} +\frac{1}{q2} =\frac{1}{f}[/tex]
[tex]\frac{1}{20} +\frac{1}{q2} =\frac{1}{4.458}[/tex]
[tex]\frac{1}{q2}=0.2243-\frac{1}{20}[/tex]
[tex]\frac{1}{q2}=0.1743[/tex]
Hence, q2=5.7372 cm is the new position of the image.
Initially, the object placed 10.40 cm from the mirror, then the image formed at 7.80 cm, then the object moved to 20.0 cm from the mirror, then the new image formed at 5.74 cm.
Learn more about the Lens equation on
https://brainly.com/question/11971432
#SPJ1
Five stars are shown on the following H-R diagrams. Rank the stars based on their surface temperature from highest to lowest. If two (or more) stars have the same surface temperature, drag one star on top of the other(s).
All five stars appear at the same place along the horizontal axis showing spectral type.
Because spectral type is related to surface temperature, all five stars must have the same surface temperature.
Now proceed to Part C to determine how these stars vary in luminosity.
What is a Star?This refers to the heavenly body that is a natural luminous body that is visible in the sky, especially at night
Hence, we can see that based on the ranking of stars, the surface temperature of each star is taken into account, and based on their spectral type, the stars all have the same temperature.
Therefore, to show the difference between the stars, their luminous intensity needs to be analyzed,
Read more about stars here:
https://brainly.com/question/1320222
#SPJ1
A cart that is rolling at a constant velocity on a level table fires a ball straight up out of a vertical tube.
If the cart is accelerating in the forward direction the ball would fall behind the tube.
What is meant by acceleration?The rate at which the speed and direction of a moving object vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.
Some key features of acceleration are-
Any procedure where the velocity varies is referred to as acceleration. There are just two ways to accelerate: changing your speed or changing your direction, or changing both. This is because velocity is both a speed as well as a direction.No matter how quickly you're moving, if you're not altering your direction or speed, you can't possibly be accelerating.In a car, accelerating may be accomplished by applying the gas pedal or the brakes, both of which would result in changes in speed. However, you could also turn by turning the steering wheel, which would reverse your momentum. Given that they alter velocity, any of them would be seen as an acceleration.The formula of acceleration is -
[tex]a=\frac{\Delta v}{\Delta t}=\frac{v_{f}-v_{i}}{\Delta t}[/tex]
[tex]v_{f}[/tex] is the final velocity
[tex]v_{i}[/tex] is the initial velocity
Δt is total time between both velocities.
To know more about the acceleration, here
https://brainly.com/question/460763
#SPJ4
The complete question is-
A cart that is rolling at a constant velocity on a level table fires a ball straight up out of a vertical tube. Does your answer change if the cart is accelerating in the forward direction? If so, how?