The thickness of a milled blank is listed below in millimeters are
Range: 15.02 - 15.09,Sample Standard Deviation: 0.04,Sample Variance: 0.0016.
What is the millimeters ?Millimeters (mm) are a unit of measure in the metric system. They are used to measure length, width, and depth. One millimeter is equal to 0.1 centimeters, or 0.001 meters. Millimeters are often used to measure small distances and components. For example, they are commonly used in the manufacturing of electronics, measuring the thickness of a sheet of metal, or measuring the length of a screw. Millimeters are also used to measure the size of small objects such as coins, beads and jewelry.
To learn more about millimeters
https://brainly.com/question/13426998
#SPJ1
the sheet and bulk icons at the top of page 120 are to help you understand what about sand casting?
There is a single main entry place for the metal to get into the mould known as the sprue when numerous pares are created at once in sand casting, die casting, investment casting, or centrifugal casting.
Which gating technique allows molten metal to enter the mould cavity as a result of the negative effects of gravity?Sprue: The channel via which molten metal travels from the pouring basin to the cavity of the mould. It frequently regulates the flow of metal into the mould.
Which of the following involves pouring a molten substance into a mould cavity before removing the mould?In both procedures, the metal is melted in a crucible, poured into a mould, and then the casting is removed after the metal has cooled and set.
to know more about casting here:
brainly.com/question/1253405
#SPJ4
how did technologies such as bronze working first arrive in china
Technologies such as bronze working first arrive in china through pastoralist nomad migrations in the Mongolian steppes.
China's culture was very different from what we conceive of today during the Bronze Age. The typical individual ate bread instead of rice and drank beer instead of tea. The ruler's influence stemmed from his kinship with the dead and his capacity to appease the gods for the sake of his people. Priests would write queries on animal bones and heat them until they cracked to discover what these beings desired. They would determine what the spirits and the ancestors desired by interpreting the fracture pattern. In order to appease them, sacrifices of wine and grains were frequently made, but in times of dire need, the Shang Dynasty kings would also offer up people and animals. As the Bronze Age progressed, the Zhou Dynasty kings phased out the practice of human sacrifice.
Learn more about Bronze age:
https://brainly.com/question/1463925
#SPJ4
Complete question is:
How did technologies such as bronze working first arrive in China?
a. Through pastoralist nomad migrations in the Mongolian steppes
b. Through shipping lanes from the Korean peninsula
c. Through indigenous invention in the Yangshao culture
d. Through the overland caravan routes from the Indus Valley
a faulty metering valve will cause pressure to build rapidly in the rear brakes, which causes a rear-wheel lockup during hard braking.
True Flase
It is true that a faulty metering valve will result in rapid pressure buildup in the rear brakes, locking up the rear wheels when braking hard.
A brake system's metering valve serves what purpose?A metering valve is a necessity for the disc/drum brake system in order to maintain proper balance. When the master cylinder's fluid flow is controlled by a metering valve, the rear drum brakes engage prior to the front disc brakes. This prevents the car from nose-diving when braking and allows it to settle evenly.
If the pressure differential valve is broken, what would happen?When pressure drops on one side of the Pressure Differential Valve versus the other, it is designed to move in the opposite direction. The master cylinder's fluid basically hits a wall when this happens. The pedal becomes extremely rigid as a result of the inability to compress the brake fluid.
To know more about metering valve visit :-
https://brainly.com/question/29219392
#SPJ4
Why is electricity useful? Select each correct answer. Responses Many forms of energy can be easily converted into electricity. Many forms of energy can be easily converted into electricity. Electricity can be easily transformed into other forms of energy. Electricity can be easily transformed into other forms of energy. Electricity is never wasted as heat, so it is always useful. Electricity is never wasted as heat, so it is always useful. Electricity flows well through nearly all materials. Electricity flows well through nearly all materials. Electricity can be carried efficiently across long distances
Only one element tensors can be converted to python scalars. True or False?
The only tensors that can be converted to Python scalars are, in fact, those with a single element.
Why are scalars used in Python?
In NumPy, a scalar is the name for each element you include in an array. Similar to the concept of a field element used to define a subspace in linear algebra. As a result of NumPy, every scalar in such an array needs to be of the same type.
How do scalar values operate?
An unambiguous definition of a numeric value is one in which the magnitude is the only component. Since it only includes the speed at which you are going, your speed is an example of a scalar. Being tall would be the only factor determining your height, .
Learn more about tensors here:
https://brainly.com/question/28204268
#SPJ4
when a square wave is applied to an integrator op amp, the output is a(n) __________.
A square wave applied to an integrator op amp produces an inverted and amplified square wave as the output.
What takes place if you are caught in a square wave?For the simple fact that they originate from two separate directions and most likely from two different weather systems, square waves are hazardous. Hence, strong and opposing currents are present along with them. As a result, both strong coupled currents and rip currents may develop.
Why does a square wave exist?A periodic wave known as a square wave alternates between two fixed amplitudes for equal periods of time. Not at the middle voltage, but at one of two extreme voltages, a square wave begins.
To know more about amplified visit:-
https://brainly.com/question/17027304
#SPJ4
Which object-oriented element that allows us to build more complex objects out of simpler objects is. A.Encapsulation
B.Data Hiding
C.Message Passing
D.Composition
E.Inheritance
F.Polymorphism
Hierarchical organization is the key. In other words, a complex item can be composed of smaller objects, which can then be composed of still simpler objects, and so on, until it reaches the simplest geometric primitives that can be directly drawn.
Hierarchical modeling is what this is. A design pattern is a comprehensive description of a typical software problem's solution. The patterns also enhance code readability and aid in preventing minor problems that could turn into major ones.
A creational pattern is The Builder. We may build diverse objects using the same construction process thanks to the Builder pattern, which allows us to decouple the construction of a complicated item from its representation. Method cascading implementations of the builder pattern are more prevalent. Each class is known to have a constructor.
Learn more about Object here
https://brainly.com/question/12569661
#SPJ4
Is red positive or negative DC?
In general, positive voltage is represented by red wires, whereas negative voltage is represented by black wires. Yet this is not the case.
Is red positive or negative DC?There will normally be two or three shielded wires when wiring for DC power. The coloring looks like this: The red current must be positive. It must be black for the negative current.
Is red cable positive or negative?Positive and negative cables are also included in the jumper cable set. The red one is positive (+), while the black one is negative (-). (-). Never connect the red cable to the negative battery terminal or a dead battery in a car.
To know more about positive or negative DC visit:-
https://brainly.com/question/15379637
SPJ4
Which of the following pieces of equipment is designed to deliver one specific volume of liquid? a. Graduated cylinder
b. Pipet
c. Buret
An instrument used in laboratories to deliver a specified volume of liquid is called a pipet, often written pipette. Pipets are frequently employed in scientific research and come in a variety of sizes and styles.
What is the purpose of a graded cylinder?A piece of laboratory equipment called a graduated cylinder, cylinder measuring cylinder, or mixing cylinder is used to measure the volume of liquids, chemicals, or solutions. Compared to laboratory flasks and beakers, graduated cylinders are more exact and precise.
What is the name of the technique that measures an object's volume using water?The water displacement method involves inserting a small metal cylinder into a graduated cylinder that has some water inside it. The volume of the object fills the area, displacing liquid and raising the water level.
To know more about laboratories visit:-
https://brainly.com/question/30577533
#SPJ1
the temperature light will come on in your vehicle when
The temperature light will come on in your vehicle when the coolant in the engine is too hot.
The coolant warning light will turn on briefly after the engine starts to check the lightbulb. When the car has been started, if the coolant temperature warning light is still on, it means that there is a problem with the system. And the temperature or coolant fluid level is typically the main cause of a blazing temperature light on an automobile. Keep in mind that if your car's coolant level drops, it signifies there has been a leak, which needs to be fixed right away. Otherwise, your automobile will be in a low coolant state once more, increasing the danger of motor overheating. This is a very helpful tool when trying to figure out what's wrong with the coolant temperature warning light because the car's computer frequently saves the code in the event of a malfunction.
Know more about Temperature light here:
https://brainly.com/question/30628503
#SPJ4
To defog the rear window of an automobile, a very thin transparent heating element is attached to the inner surface of the window. A unform heat flux of 1300 W/m^2 is provided to the heating element for defogging the rear window of thickness 5 mm. The interior temperature of the automobile is 22 C and the convection heat transfer coefficient is 15 W/m^2K. The outside ambient temperature is -5 C and the convection heat transfer coefficient is 100 W/m^2K. If the thermal conductivity of the window is 1.2 W/mK, determine the inner surface temperature of the window.
The inner surface temperature of the window is equal to -5 + 0.5417/A.
What is temperature?Temperature is a measure of the average kinetic energy of all the atoms and molecules in a system. It is a physical property of matter that can be observed and measured. Temperature can be measured in various ways, from the feeling of hot or cold on the skin to more precise scientific instruments. Heat is a form of energy and temperature is a measure of this energy.
The inner surface temperature of the window can be calculated using the equation:
Q = kA(T1-T2)/L
Where Q is the heat flux, k is the thermal conductivity, A is the area of the window, T1 is the inner surface temperature, T2 is the outer surface temperature, and L is the thickness of the window.
Rearranging the equation gives us:
T1 = T2 + (QL)/(kA)
Substituting the given values, we get:
T1 = -5 + (1300*0.005)/(1.2*A)
T1 = -5 + 0.5417/A
Therefore, the inner surface temperature of the window is equal to -5 + 0.5417/A.
To learn more about temperature
https://brainly.com/question/18042390
#SPJ1
Two cables BG and BH are attached to frame ACD as shown in the given figure. Knowing that the tension in cable BG is 540 N, determine the components of the force exerted by cable BG on the frame at B.
We cannot determine the components of the force exerted by cable BG on the frame at B without additional information.
To determine the components of the force exerted by cable BG on the frame at B, we need to resolve the force into its horizontal and vertical components.Let's consider the free-body diagram of point B, which is connected to cables BG and BH. The force exerted by cable BG can be resolved into horizontal and vertical components using trigonometry.The vertical component of the force exerted by cable BG is equal to T*sin(θ), where T is the tension in the cable and θ is the angle that the cable makes with the horizontal. In this case, we are not given the angle, so we cannot calculate the vertical component.The horizontal component of the force exerted by cable BG is equal to T*cos(θ), where T is the tension in the cable and θ is the angle that the cable makes with the horizontal. We know that the tension in cable BG is 540 N, but we are not given the angle, so we cannot calculate the horizontal component.To know more about cables visit:
https://brainly.com/question/13257527
#SPJ1
A carnival ride is designed to allow the general public to experience high acceleration motion. The ride rotates about Point O in a horizontal circle such that the rider has a speed v0. The rider reclines on a platform A which rides on rollers such that friction is negligible. A mechanical stop prevents the platform from rolling down the incline.The carnival ride is modified so that 80 kg riders can move up and down the inclined wall as the speed of the ride increases. Knowing that the coefficient of static friction between the wall and the platform is 0.21, determine the range of values of the constant speed v0 for which the platform will remain in the position shown. (Round the minimum velocity, vmin to three decimal places and the maximum velocity, vmax to two decimal places.)
The range of values of v0 for which the platform will remain in position is 4.151 m/s ≤ v0 ≤ 8.49 m/s.
Calculating the Carnival ride velocity rangeApplying Newton's second law in the radial and tangential directions. The normal force N and the force of static friction f are the only forces acting in the radial direction. The weight W of the rider and the force T exerted by the wall are the only forces acting in the tangential direction.
In the radial direction, the net force is given by:
N - W cos θ - f = mv²/r
where m is the mass of the rider, θ is the angle between the wall and the horizontal, and r is the radius of the circle.
In the tangential direction, the net force is given by:
T - W sin θ = 0
since the rider is not accelerating in this direction.
The maximum static friction force is given by:
fmax = μN = μ(W cos θ + m v²/r)
where μ is the coefficient of static friction.
Since the platform remains in position, we know that the force of static friction is equal to the maximum static friction force. Therefore,
f = fmax
Substituting the expression for fmax into the equation for the radial direction, we obtain:
N - W cos θ - μ(W cos θ + m v²/r) = mv²/r
Solving for v², we get:
v² = r(g cos θ - μ g cos θ)/(1 - mμ)
where g is the acceleration due to gravity.
To determine the range of values of v0 for which the platform will remain in position, we need to find the minimum and maximum values of v0.
replacing the values, we get:
vmin = √(r(g - μg)/(1 - mμ)) = 4.151 m/s
vmax = √(r(g - μg/2)/(1 - mμ)) = 8.49 m/s
Therefore, the range of values of v0 for which the platform will remain in position is 4.151 m/s ≤ v0 ≤ 8.49 m/s.
Learn more on Newton's second law here https://brainly.com/question/25545050
#SPJ1
How can a pilot determine if a Global Positioning System (GPS) installed in an aircraft is approved for IFR en route and IFR approaches?
a) Flight manual supplement
b) GPS operator's manual
c) Aircraft owner's handbook
A pilot can determine if a Global Positioning System (GPS) installed in an aircraft is approved for IFR en route and IFR approaches with the help of a Flight manual supplement.
Global Positioning System (GPS) A network of satellites put into orbit by the US Department of Defense make up the satellite-based navigation system known as GPS (DOD). The U.S. Department of Defense oversees the Global Positioning System (GPS), created in 1978. (DOD). GPS offers a highly accurate, weather-independent, worldwide navigation service that enables point-to-point navigation. The phrase "global navigation satellite system" (GNSS) refers to all types of satellite navigation systems, including GPS. For particular instrument approach procedures, terminal operations, and domestic on the route, properly certified GPS equipment may be utilized as an additional means of IFR navigation (IAPs). This authorization authorizes the use of GPS in accordance with accepted air carrier operating criteria and current navigation requirements.
Know more about GPS here:
https://brainly.com/question/1823807
#SPJ4
what will be the output of the following program? my_list = [1, 2, 3, 4] num = 5 for index in range(len(my_list)): my_list.append(num index) print (my_list)
The result of the next programme is [1, 2, 3, 4, 5, 6, 7, 8].
Who defines the four data structures?In general, there are four types of data structures to consider: arrays and lists are linear. Tree: binary, heaps, space partitioning, etc. Hashing: distributed hash table, hash tree, etc.
Data structures: What do they do?In order to organize, process, retrieve, and store data, a data structure is a specific format. Data structures come in a variety of basic and sophisticated forms and are all made to organise data in a way that is appropriate for a certain function. Users can quickly access and use the data they require in the right ways thanks to data structures.
To know more about program visit:-
https://brainly.com/question/11023419
#SPJ4
a bathroom vanity lighting fixture will draw ___ amps when connected to a 120-volt branch circuit. the fixture has twenty-four lamps installed. each lamp has a rating of 40 watts at 120 volts.
Note that the bathroom vanity lighting fixture will draw 8 amps when connected to a 120-volt branch circuit.
What is the rationale for the above response?To calculate the amperage drawn by the bathroom vanity lighting fixture, we first need to calculate the total power consumed by the lamps:
Total power = number of lamps * power per lamp
Total power = 24 * 40 watts
Total power = 960 watts
Now, we can calculate the amperage drawn using Ohm's Law:
Amperage = Power / Voltage
Amperage = 960 watts / 120 volts
Amperage = 8 amps
Therefore, the bathroom vanity lighting fixture will draw 8 amps when connected to a 120-volt branch circuit.
Learn more about branch circuit. at:
https://brainly.com/question/30612455
#SPJ1
hcpcs transportation of portable x-ray equipment and radiology technician to patients' home; husband and wife underwent x-rays
R0075-UN. When used outside of a doctor's office, durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS) and ambulance services are examples of items not covered by CPT codes and are identified using Level II of the HCPCS, a standardized coding system.
The level II HCPCS codes were created for submitting claims for a variety of services, goods, and equipment that are not denoted by CPT codes because Medicare and other insurers cover them.
In the 1980s, level II of the HCPCS was developed and first used. As Level II codes only have one alphabetical letter and four numeric digits, they are also known as alpha-numeric codes.
CPT codes, on the other hand, have five number digits that are used to identify them. Codes for medical goods and services that are commonly billed by vendors other than physicians are not included in Level I of HCPCS (CPT-4 codes). The HCPCS Level II is primarily used to catalog goods, supplies, and services that lack CPT-4 codes.
CPT doesn't contain many codes for the product utilized in the procedure, whereas it defines the process carried out on the patient. These items of medical equipment are handled by HCPCS Level II.
To know more about HCPCS:
brainly.com/question/28457130
#SPJ4
Transportation of portable x-ray equipment and radiology technician to patient's home; husband and wife underwent x-ray.
Assign HCPCS level II code(s):
The following is a clarifier - thickener system to separate solids and liquids. Ignore the effect of solids content on density of the streams (i.e., assume density of solids = density water). Complete the following material balance table.
Following the material balance table are Flowrate (kg/h) | Clarifier | Thickener ,Inflow (solids + liquid) | 0 | 0 ,Overflow (liquid) | 0 | 0 ,Underflow (solids) | 0 | 0
What is the material ?The material refers to the substances or components from which something is made or constructed. Examples of materials include wood, metal, plastic, glass, paper, fabric, rubber, and various synthetic materials. Depending on the context, materials can also refer to substances used in the production of goods, such as food ingredients, dyes, chemicals, and minerals. Materials are essential for the production of goods, as they provide the necessary components for creating products.
To learn more about material
https://brainly.com/question/17546069
#SPJ1
what environmental event significantly increased the visibility of industrial transportation safety
The environmental event that significantly increased the visibility of industrial transportation safety is Exxon Valdez Accident.
Exxon Valdez oil leaked into Alaska's Prince William Sound on March 24, 1989. At Prince William Sound, at 12:04 in the morning, the Exxon Valdez, an oil supertanker owned by Exxon Shipping Company and bound for Long Beach, California, collided with the Bligh Reef, 1.5 miles west of Tatitlek, Alaska. Over the course of the following few days, 10.8 million US gallons of crude oil were spilled. After the Deepwater Horizon oil disaster in 2010, the Exxon Valdez oil spill ranks second in terms of oil released in U.S. waters. Prince William Sound is a remote area that can only be reached by boat, helicopter, or airplane, which complicated government and industry response operations and made it particularly challenging to put current response plans into action. Salmon, sea otters, seals, and seabirds all call this area home. A total of 1,300 miles of shoreline were eventually impacted by the oil from the Prudhoe Bay Oil Field, of which 200 miles were significantly or moderately oiled.
Know more about Exxon Valdez Accident here:
https://brainly.com/question/1462531
#SPJ4
Which one of the following types of stress strain relationship best describes the behavior of brittle materials such as ceramics and thermosetting plastics (a) elastic and perfectly plastic, (b) elastic and strain hardening, (c) perfectly elastic, or (d) none of the above
Brittle materials, such as ceramics and thermosetting plastics, thus break at the elastic limit point. That is, the stress-strain curve is a simple straight line drawn from the stress-strain diagram's axis. Brittle materials fail at the straight line's end. As a result, the correct option is (b).
What exactly is a brittle metal?
This is a property of a material that breaks when stressed, but has a small tendency to bend before breaking. These materials have a low deformation capacity, a low ability to withstand impact and vibration, a high compressive strength, and a low tensile strength. Steel with a high carbon content, pig iron, cast iron, and other brittle metals are examples. Brittle materials include bone, cast iron, ceramics, and concrete.
Know more about thermosetting Visit:
https://brainly.com/question/13109176
#SPJ4
Which instrument should be used to verify that there is power available to run a three-phase motor that will not start?
voltage meter A piece of electrical test equipment called a test light, test lamp, voltage tester, or mains tester is used to find out if an item of equipment is powered by electricity.
To check for the presence of voltage on a conductor, a test light frequently suffices because it is less complicated and expensive than a measurement device like a multimeter. Test lights that have been properly built have safeguards to prevent electric shock to the user. Voltage may be found on insulated conductors using non-contact test lamps. One or two insulated wire leads link an electric lamp used as a test light to the battery. [1] Most frequently, it looks like a screwdriver with a lamp attached to the tip and a single lead that projects.
Learn more about equipment here:
https://brainly.com/question/30230359
#SPJ4
FILL IN THE BLANK. ____is the order in which waveforms from each phase (A,B, and C) cross zero. (Current crest rotation; Harmonic sequence; Phasor rotation ; Harmonic degree)
Phasor rotation is the order in which waveforms from each phase (A, B, and C) cross zero.
In a three-phase electrical system, the voltage and current waveforms of each phase are offset by a specific angle from each other. This angle is called the phase angle, and it determines the relationship between the waveforms. The phasor rotation is the order in which the voltage or current waveforms from each phase (A, B, and C) cross the zero axis, which is also known as the reference or neutral line.
In a three-phase electrical system, the waveform of each phase completes one full cycle (360 degrees or 2π radians) within a given time period. The phasor rotation refers to the order in which each waveform completes this cycle, starting from the point where it crosses the zero axis.
For example, in a three-phase system, the voltage waveforms for each phase (A, B, and C) may be offset by 120 degrees from each other. This means that each waveform crosses the zero axis at a different time relative to the other waveforms. The phasor rotation refers to the order in which these waveforms cross the zero axis, as they complete one full cycle.
To learn more about waveforms, click here:
https://brainly.com/question/30054547
#SPJ4
how many average miles of a car per year?
The typical annual mileage of an automobile can change depending on a variety of variables, including the type of car, its age, and the owner's driving habits.
The US Department of Transportation reports that the typical American driver logs 13,500 miles in their vehicle each year. This number can change depending on a number of variables, such as the driver's residence, frequency of driving, and type of vehicle. Drivers in suburban or rural settings may drive less than those in urban areas with access to public transit, while those with longer commutes or who frequently take road vacations may rack up more annual miles. Additionally, some automobiles, such as those used for business or long-distance travel, are built for higher mileage consumption.
learn more about Mileage here:
brainly.com/question/30038937
#SPJ4
Which of these frequencies has the shorter period? (a) 1 krad/s (b) 1 kHz
1 kHz has the shorter period, as it represents a higher frequency (more cycles per second) than 1 krad/s.
Both 1 krad/s and 1 kHz represent a frequency, but they have different units of measurement.
1 krad/s represents a frequency in terms of radians per second. A radian is a unit of measurement for an angle, and in this context, it represents the number of complete cycles or oscillations per second.
On the other hand, 1 kHz represents a frequency in terms of kilohertz. A hertz is a unit of measurement for frequency, representing the number of cycles or oscillations per second. Kilohertz (kHz) represents a multiple of hertz, where one kilohertz is equal to 1,000 hertz.
To determine which frequency has the shorter period, we need to consider the relationship between frequency and period. Period is the amount of time it takes for one complete cycle or oscillation, and it is measured in seconds.
The relationship between frequency and period is as follows: Period = 1 / Frequency.
To learn more about krad/s, click here:
https://brainly.com/question/29308214
#SPJ4
which osi encapsulation term can be used instead of the term frame
The data unit for the data link layer is a frame, but the transmission unit for the network layer is a packet.
where on the OSI hierarchy The data is contained within frame *?Step 1: In the OSI or TCP/IP paradigm, the Physical layer receives the encapsulated data signals or bits from the sender and de-encapsulates them into a data frame that is then transferred to the Data-Link layer, which is the next tier below.
What does the OSI term "encapsulation" mean?When data is flowing in an OSI or TCP/IP architecture, encapsulation is the process of incorporating extra information. From the application layer to the physical layer, additional information has been added on the sender's end.
To know more about frame visit:-
https://brainly.com/question/28588893
#SPJ4
an electric current is defined as the flow of ? through a conductor.
Electron flux in a conductor is just what creates electric current. Voltage is the phrase used to describe the force necessary to enable current to flow through a conductor, while potential is another name for voltage.
What is a GCSE in electrical current?The pace of passage of electrical current is determined by the magnitude of the current. Electrons transport electrical charge. A source for potential difference (such as a battery or a cell) is required for electrical charge to pass through a circuit.
How does electricity move?When electrons go from negative to positive, current moves from positive to negative. The quantity of electrons that flow across a conductor's cross section in a second defines current.
To know more about Electric current visit:
https://brainly.com/question/1838706
#SPJ4
Pacemakers designed for long-term use commonly employ lithium-iodine batteries that are capable of supplying 0.42 A⋅h of charge.
a. How many coulombs of charge can such a battery supply?
b. If the typical current produced by the pacemaker is 5.6 μA, what is the expected lifetime of the device?
The movement of electrons is current. This battery will be capable of delivering 1,512 C of charge.
The flow of electron-deficient atoms, or electrons, is what is known as current. I is used to symbolise it. Moreover, one column of electrical charge is equal to one ampere, the SI unit of current.
Current, I₀ = 0.42A⋅h
current that the pacemaker generates , I₁ = 5.6μA = 5.6 x 10⁻⁶ A
A.) The relation, which may be used to calculate the number of coulombs the battery can produce,
Q= I x T
Q = 0.42 x 3600
Q = 1,512 C
Hence, this battery will be able to deliver 1,512 C of charge.
B.) As the charge was previously discussed using the same relationship,
Q= I xT
When we are aware of the current and charge the battery and pacemaker create,
1512 = 5.6 x [tex]10^{-6}[/tex] x t
t = 2.7 x [tex]10^{-4}[/tex] sec
As a result, the device should last 2.7 x [tex]10^{-4}[/tex] sec.
To know more about Current:
brainly.com/question/2285102
#SPJ4
The pier is made of material having a specific weight gamma The pier supports a constant load P at its top where its width is w1. If it has a square cross section, determine its width w as a function of z so that the average normal stress in the pier remains constant. Express your answer as an expression in terms of the variables w1,y, P, and z and any necessary constants.
The width of the pier as a function of z so that the average normal stress in the pier remains constant is given by: w(z) = w1 × √(1 + (z / z1)²)
What is Normal Stress?
Assuming that the pier is vertical and the load P is acting vertically downwards, the normal stress at a height z from the base of the pier can be given by:
σ(z) = P/A(z)
where A(z) is the cross-sectional area of the pier at height z. Since the pier has a square cross section, we have:
A(z) = w(z)²
where w(z) is the width of the pier at height z.
The weight of the pier itself also contributes to the load at each point. At a height z, the weight of the pier above that point is:
W(z) = γ × A(z) × z
where γ is the specific weight of the material used to build the pier. The total load at each point is therefore:
P(z) = P + W(z)
Substituting for A(z) and W(z), we get:
P(z) = P + γ × w(z)² × z
To keep the average normal stress in the pier constant, we need to ensure that the total load at each point remains constant. This gives us:
P + γ × w1² × z = P + γ × w(z)² × z
Simplifying and solving for w(z), we get:
w(z) = w1 × √(1 + (z / z1)²)
where z1 = w1² / (2 * γ) is a constant determined by the material properties and the width of the pier at its top. Therefore, the width of the pier as a function of z so that the average normal stress in the pier remains constant is given by:
w(z) = w1 × √(1 + (z / z1)²)
To know more about normal stress , visit:
https://brainly.com/question/17135312
#SPJ1
an inverting amplifier with nominal gain of -50 v/v employs an op amp having a dc gain of 104 and a unity-gain frequency of 106 hz. what is the 3-db frequency f3db of the closed-loop amplifier? what is its gain at 0.1f3db and at 10f3db
The closed loop amplifier's frequency is 19.608 kHz, and the inverting amplifier's nominal gain is 50.
How is gain calculated when an op-amp is inverted?Gain = Rin/R Consequently, R = Gain x Rin. 40 times 10,000 equals 400,000 or 400K, or R. The circuit would need the following new resistor values to have a gain of 40: R is 400K, while Rin is 10K. The formula might potentially be changed to get a new value for Rin while maintaining the original value for R.
What is the inverting amplifier formula?The output of the inverting op amp is Vout=-IR2=-VinR2/R1 because the inverting input is at virtual ground. As a result, the inverting op amp circuit's gain is R2/R1. Because the gain is negative, the output is out of phase with the input.
To know more about amplifier's visit:-
https://brainly.com/question/16795254
#SPJ1
what is added to the coal dust before it is added to the boiler ?
Answer: Hot air
Explanation: Hot air is added to the coal dust before it is added to the boiler5