To defog the rear window of an automobile, a very thin transparent heating element is attached to the inner surface of the window. A unform heat flux of 1300 W/m^2 is provided to the heating element for defogging the rear window of thickness 5 mm. The interior temperature of the automobile is 22 C and the convection heat transfer coefficient is 15 W/m^2K. The outside ambient temperature is -5 C and the convection heat transfer coefficient is 100 W/m^2K. If the thermal conductivity of the window is 1.2 W/mK, determine the inner surface temperature of the window.

Answer: C

Explanation:

The correct option is B.

Discrepancy is a term used to describe a difference or inconsistency between two or more things that should be the same or similar. It can refer to a variety of situations, such as a mismatch in data or information, a disagreement between parties, or a deviation from expected or standard values.

In data analysis, discrepancy is often used to describe a discrepancy between the data collected and the expected or predicted values. This can occur due to errors in data collection, measurement, or analysis, or due to the presence of outliers or other unusual data points. Discrepancies in data can be identified through statistical analysis, such as regression analysis or hypothesis testing.

Discrepancy can also refer to a difference between two parties or groups, such as a discrepancy in opinion or perspective. In this context, discrepancies can arise due to differences in background, experience, or values, and may require negotiation or compromise to resolve.

Overall, discrepancy is a term that is commonly used in a variety of contexts to describe differences or inconsistencies between two or more things, and can have important implications for decision-making, problem-solving, and communication.

Based on the information provided, the most likely cause of the accounting problem is option B, the tanks were not empty at the start. If there was residual oil left in the tanks from previous shipments, and that oil was not accounted for in the measurement, it could result in an inaccurate billing. Using the rotameter and stopwatch to measure the amount of oil placed in the trucks should provide an accurate measurement, provided the tanks are empty at the start of each shipment. The other options (A, C, and D) could also potentially cause measurement errors, but they would likely result in consistently inaccurate measurements rather than an 8% discrepancy.

To know more about measurement visit:

https://brainly.com/question/18076822

#SPJ1

At the end of the month, the accounting department says that the company has produced 8% more oil than it has billed discrepancy for the tanks were not empty at the start.

Discrepancy is a term used to describe a difference or inconsistency between two or more things that should be the same or similar. It can refer to a variety of situations, such as a mismatch in data or information, a disagreement between parties, or a deviation from expected or standard values.

In data analysis, discrepancy is often used to describe a discrepancy between the data collected and the expected or predicted values. This can occur due to errors in data collection, measurement, or analysis, or due to the presence of outliers or other unusual data points. Discrepancies in data can be identified through statistical analysis, such as regression analysis or hypothesis testing.

Discrepancy can also refer to a difference between two parties or groups, such as a discrepancy in opinion or perspective. In this context, discrepancies can arise due to differences in background, experience, or values, and may require negotiation or compromise to resolve.

Overall, discrepancy is a term that is commonly used in a variety of contexts to describe differences or inconsistencies between two or more things, and can have important implications for decision-making, problem-solving, and communication.

Based on the information provided, the most likely cause of the accounting problem is option B, the tanks were not empty at the start. If there was residual oil left in the tanks from previous shipments, and that oil was not accounted for in the measurement, it could result in an inaccurate billing. Using the rotameter and stopwatch to measure the amount of oil placed in the trucks should provide an accurate measurement, provided the tanks are empty at the start of each shipment. The other options (A, C, and D) could also potentially cause measurement errors, but they would likely result in consistently inaccurate measurements rather than an 8% discrepancy.

To know more about discrepancy visit:

https://brainly.com/question/28275338

#SPJ1

The base-collector junction is reverse-biased, while the base-emitter junction is forward-biased. The majority of bipolar transistors are built to have the highest forward-active mode (F) common-emitter current gain possible.

If so, the collector-emitter current will be substantially greater for minor base current fluctuations while still being roughly proportional to the base current. For the transistor to operate in the active state, the emitter-base junction must be forward biased and the collector-base junction must be reversed-biased.

As the first junction is forwardly biased, the majority of the current flows through it and travels to the base, but the second junction needs to be reversely biased in order to reach the collector.

While the collector-to-base junction is reverse-biased, the emitter-to-base junction is forward-biased. The electrons from the N-type emitter travel toward the forward bias at the emitter to the base junction. This circumstance determines the emitter current (IE).

To know more about current:

brainly.com/question/29766827

#SPJ4

Consider that it is needed to assign each of Floyd’s customers to a distribution center that is at the closest distance to the customer. The customer zip codes have been given and their distances from each of the five distribution centers in the referred data file “Floyds”.

Since the interest is in determining the center which is at the shortest distance from the customer, the shortest distance is obtained for each customer. So in the cell G3, use the function written below:

= MIN(B4:F4)

The value obtained is 731. Drag this formula down for all 1029 customers. Now that the minimum distance for each customer has been obtained, it is needed to find out the distribution center for the corresponding distance. For this, first, find the position at which this minimum distance value occurs in the array of five distances. So in cell H4, enter the below formula:

= MATCH (G4, B4; F4, 0)

This function looks for the contents of cell G4 in the range B4 to F4 and returns the position in the array at which it occurs. Since the distance 731 in cell G4 occurs at 1st position in the array of cells from B4 to F4, the function returns value 1 in cell H4. Drag this formula for all 1029 customers.

Step 3/3

Now it is needed to associate each position with the distribution center. For this, use the Index function in cell I4 as below:

= INDEX ($B$2: $F$2, H4)

This function returns the value of the position stated in cell H4 from the range B2 to F2. Now cells B2 to F2 contain the names of all the five distribution centers.

So, by giving this above function, the distribution center is obtained for first customer as Charlotte, NC. Drag this formula for all 1029 customers so that each customer is assigned the nearest distribution center

Read more about distribution centers here:

https://brainly.com/question/28067298

#SPJ1

Each advancement cycle, you can earn up to 3.0 Points for PNA and SS, or up to 1.5 Points for each.

PNA points are given to candidates in the grades E-4 through E-6 who scored relatively well on a previous Navy-wide advancement examination or had relatively high performance mark averages during an examination cycle in which they competed for advancement but were not promoted due to quota restrictions.

There are five levels of MOPP: MOPP zero, MOPP one, MOPP two, and MOPP four Personal protection from chemical, biological, radiological, nuclear, and explosive threats is increased or decreased by the levels, similar to attack signal warnings.

To know more about PNA visit :-

https://brainly.com/question/30404829

#SPJ4

The independent variable is the one that is changed by the scientist.

To ensure a fair test, a good experiment has only ONE independent variable. As the scientist changes the independent variable, he or she records the data that they collect.

Zinc is not a common alloying ingredient in steel.

Steel's primary alloying element, carbon, increases the material's strength, hardness, and mechanical resistance. Nevertheless, in addition to this rise, malleability, ductility, and hardness fall.

Steel that has roughly 5% alloying components in it is referred to as alloy steel. These alloying components can include tungsten, nickel, vanadium, chromium, manganese, and chromium. Overall machinability and corrosion resistance are increased by adding alloying elements.

to know more about alloying here:

brainly.com/question/30432755

#SPJ4

1/8 with a move and a loss of a turn Display 2 spaces and move 1 space.

Which of the following best explains a benefit of representing data with hexadecimal integers rather than binary numerals? In general, a binary representation of the same value requires more digits than a hexadecimal representation.

Which of the enumerated byte pair encoding claims is accurate? Response that was chosen: [None Provided] Answers: Because a string may be restored to its original form, byte pair encoding is an example of a lossless transformation.

To know more about  hexadecimal numeral visit:-

https://brainly.com/question/24881625

#SPJ1

The Code does not allow using a single center No. 6-32 screw to secure the receptacle to the cover. when containers are covered with elevated surfaces.

Because receptacles that are higher than 5.5 feet (1.7 meters) above the floor cannot be considered as needed receptacles, they are typically not installed in the ceiling. Floor receptacles must be placed because there is no room for them in the walls.

You've got a code violation on your hands if you don't have outlet covers. But don't fall into the trap of assuming any cover will do! You require either flat covers or bubble covers for outdoor receptacles in order to comply with codes.

To know more about Code visit:-

https://brainly.com/question/17204194

#SPJ4

Non-motorized vehicles are allowed on expressways.The statement is false.

Vehicles are machines used to transport people and goods from one place to another. They come in all shapes and sizes, from cars, buses, and trucks, to boats, planes, and even spacecraft. Vehicles have been around for centuries, and have been used for everything from military operations to leisurely travel.

Non-motorized vehicles such as bicycles and skateboards are not allowed on expressways due to safety concerns. The speed of expressway traffic and the lack of physical barriers between vehicles and the roadway make it too dangerous for non-motorized vehicles.

To learn more about vehicles

https://brainly.com/question/29522053

#SPJ4

Throughout the project, as the Development Team gains a deeper understanding of the project.

The Architect of Software. The software architect is the individual accountable for all software system planning and organization. They are in charge of developing framework and high-level design standards. In addition, they choose which platforms, coding standards, and tools best suit their projects.

In a scrum/agile project setting, how is software architecture chosen? It never gets "decided." When you add features and refactor, the team eventually comes up with a design that doesn't need as many changes to add new features. You don't have to design if you're agile.

To know more about system's architecture visit :-

https://brainly.com/question/29462466

#SPJ4

The invalid inputlookup expression is (b) | inputlookup file.csv.gz.

What is inputlookup command?

The inputlookup command is used in Splunk to retrieve data from a lookup file and use it in a search.

In the given expressions, options (a), (c), and (d) are valid inputlookup expressions because they use the correct syntax for the command and refer to existing lookup files in the system.

However, option (b) is not a valid inputlookup expression because it refers to a file with a .gz extension.

The inputlookup command can only retrieve data from files in CSV or KV format, and it does not support compressed files. Therefore, the correct expression for this scenario would be:

| inputlookup file.csv

This expression retrieves data from the file named "file.csv" and uses it in the search.

To know more about Splunk, visit: https://brainly.com/question/30330547

#SPJ1

I'm sorry, I cannot provide an answer without additional information or a diagram showing the circuit. Please provide more context or a circuit diagram.

A red buoy under the U.S. Aids to Navigation System is used to mark the port (left-hand) side of a channel when proceeding in the upstream direction.

Direction is the instruction or guidance given to someone to help them reach a specific goal. It is important for any kind of endeavor, as it helps to ensure that the desired outcome will be achieved more quickly and efficiently. It can involve a number of different elements, such as navigation, communication, strategy, and motivation.

It is typically used in conjunction with a green buoy, which marks the starboard (right-hand) side of the channel. Red buoys also serve to mark the location of an obstruction or danger.

To learn more about direction

https://brainly.com/question/30575337

#SPJ4

Keep in mind that Romans did not utilize the basic numerals, which had count values like I: 1, V: 5, X: 10, C: 100, D: 500, M: 1000, etc.

Thus, let's see how to convert roman numerals to decimals:

Examine two neighboring characters at a time as you go from left to right along the Roman numerals. If you choose, you can optionally define the direction of the loops; but, as long as the comparisons are carried out correctly, it makes no difference.

Subtract the count at that point from the final value if the value on the left is greater than the value on the right. If not, simply add it. The final value is the roman numerals' decimal equivalent when the operation is finished.

Take each symbol starting at index 0 one at a time: Add this value to the running total if the symbol's current value is higher than or equal to the symbol's value after it. Instead, deduct this amount by adding the value of the subsequent symbol to the ongoing tally.

To translate a decimal value to its matching binary value in Python, just use the bin() function. Likewise, the int() method converts a binary value to its decimal equivalent.

To know more about numerals:

brainly.com/question/29168111

#SPJ4

Clone any impacted hard drives to preserve the evidence. The correct option is B.

Litigation is basically the process of taking an argument between people or groups to a court of law.

When an incident handler needs to preserve evidence for potential litigation, one of the most important things to do is to create a forensic copy or clone of the impacted hard drives, which will preserve the data in its original state and ensure that it has not been altered.

This is significant because the evidence may be required in court, and any changes or modifications could render it invalid.

Encrypting the files, notifying law enforcement, and contacting the cyber insurance company are all necessary steps in responding to a security incident, but they do not specifically address evidence preservation.

Thus, the correct option is B.

For more details regarding litigation, visit:

https://brainly.com/question/14678868

#SPJ1

Rolling and turning speeds. What expresses itself clearly in the turn coordinator's small aircraft.  Rolling and turning speeds.

Turn coordinators show information about the quality and coordination of the turn, as well as the rate and roll information. Only the turn rate is shown by turn and slip indicators. The turn and bank indicator was developed from it. This ball assesses the relative intensity of the gravitational force and the turn-induced inertia.

What signals are shown by the turn coordinator's small aircraft? Rolling and turning speeds.

To know more about miniature aircraft visit:-

https://brainly.com/question/18148720

#SPJ4

Building the "wrong" relationship with the "right" supplier is likely to result in wasted resources and missed opportunities.

Among your suppliers are likely to be a toolmaker, an electrical provider, and a wood processing firm. They provide you with timber, electricity, and furniture-making equipment. Yet, some accounting manuals only list raw material suppliers as suppliers.

Suppliers, who only engage in business-to-business transactions, are commonly referred to as initial link in a distribution chain. A vendor, in contrast, is a firm or individual that buys goods from a company and then distributes them to another party.

To know more about supplier visit:

https://brainly.com/question/28990486

#SPJ1

U.S. News ranks Cal Poly San Luis Obispo's engineering programme first among public universities in the western United States.

Cal Poly, also known as California Polytechnic State University, is renowned for its engineering programmes. It is regarded as one of the best engineering schools in the country, and its engineering programmes are consistently ranked among the best in the country.

Mechanical engineering, civil engineering, electrical engineering, aerospace engineering, and computer engineering are just a few of the engineering programmes available at Cal Poly. The school is well-known for its hands-on approach to learning, which emphasises project-based learning, collaboration, and the development of practical skills. Cal Poly engineering graduates are in high demand by employers, and the school has a proven track record of producing successful engineers and industry leaders.

To Know more about Cal Poly Visit:

brainly.com/question/30637272

#SPJ4

Shotguns can be widely classified into four categories: pump-action, semi-automatic, break-action, and bolt-action.

A shotgun is a long-barreled firearm with a straight-walled cartridge marked as a shotshell as its ammunition. Shotshells typically release a number of small, sphere-shaped sub-projectiles known as shot, or occasionally a single solid projectile known as a slug.

Although no one named it a "shotgun" in the Old West, this expression has its roots there. The person who would sit next to the carriage driver and wield a gun, typically a shotgun, was frequently brought along. These co-pilots served as guardians, shooing away any thieves or miscreants who tried to obstruct them.

To know more about shotgun visit :

https://brainly.com/question/29783818

#SPJ4

The maximum surface pressure that can be achieved on the forward face of a wedge flying Mach 3.0 at standard sea-level conditions is [tex]\mathrm{1.90 \times 10^7 N/m^2}.[/tex]

What is surface pressure?

Surface pressure is the pressure exerted on the surface of a liquid or a gas due to the weight of the atmosphere above it. It is measured in units of force per unit area, and is typically expressed in millibars (mbar).

The maximum surface pressure that can be achieved on the forward face of a wedge flying Mach 3.0 at standard sea-level conditions is calculated using the formula for the pressure coefficient (Cp):

Cp = (p - p1)/(1/2 rho V²)

Where p is the static pressure, p1 is the free-stream static pressure, rho is the air density and V is the velocity of the air.

Substituting these values into the equation gives:

Cp = (p - 1.01 x 10⁵)/(1/2 x 1.225 x 9144²)

Rearranging this equation to solve for p gives:

p = Cp x (1/2 x 1.225 x 9144²) + 1.01 x 10⁵

The maximum pressure coefficient that can be achieved on the forward face of a wedge is Cp = 1. The maximum surface pressure (p) that can be achieved is therefore:

p = 1 x (1/2 x 1.225 x 9144²) + 1.01 x 10⁵

p = 1.90 x 10⁷ N/m²

Therefore, the maximum surface pressure that can be achieved on the forward face of a wedge flying Mach 3.0 at standard sea-level conditions is 1.90 x 10⁷ N/m².

To learn more about surface pressure

https://brainly.com/question/12950024

#SPJ1

When you park and leave a manual-shift vehicle, it is best to set the parking brake and shift the vehicle into first gear or reverse gear, depending on the incline of the road.

Setting the parking brake is essential when parking any vehicle, as it helps to prevent the car from rolling or moving. For manual-shift vehicles, it is also important to shift into a gear to provide an additional layer of safety. This is because, in a manual-shift vehicle, the engine is directly connected to the wheels through the transmission, and leaving the car in gear helps to provide resistance and prevent the car from rolling, even if the parking brake fails.

If the road is flat, it is recommended to shift into first gear. If the road is on an incline, it is recommended to shift into reverse gear if the car is facing downhill, or into first gear if the car is facing uphill. This is because the gear ratios of these gears provide more resistance, making it more difficult for the car to roll in either direction.

In summary, when parking and leaving a manual-shift vehicle, it is best to set the parking brake and shift into first gear or reverse gear, depending on the incline of the road. This helps to provide an additional layer of safety and prevent the car from rolling or moving.

To learn more about manual-shift vehicle, click here:

https://brainly.com/question/4521183

#SPJ4

The main types of coaxial cable are RG-6 and RG-59.

UTP (unshielded twisted pair) and STP (shielded twisted pair) are types of copper cabling used in Ethernet networks, and are not considered coaxial cables.

RG-6 and RG-59 are used for transmitting video signals, including cable TV, satellite TV, and security camera systems. RG-6 has a larger diameter, lower loss, and can carry signals over longer distances than RG-59. RG-6 is commonly used in professional installations and for high-definition video, while RG-59 is often used in residential installations or for lower-resolution video. Both RG-6 and RG-59 have a center conductor, a layer of insulation, a braided shield, and an outer jacket.

To learn more about  RG-59, click here:

https://brainly.com/question/30733247

#SPJ4

A north/south arrow is present on all reliable orienteering compasses. For orienteers, hikers, and anybody else who needs to navigate through uncharted territory, orienteering compasses are a necessity.

Orienteering is a sport that requires navigating across new terrain using a map and compass. Orienteering compasses are specialist compasses used for navigation. These compasses often include a clear baseplate with a ruler, scales, and a magnifying lens to aid read the map, and are made to be accurate and simple to use. An orienteering compass's north/south arrow, which always faces magnetic north and aids in aligning the map with the terrain, is its most crucial component. In addition to being strong, light, and portable, good orienteering compasses also have waterproof casings for usage in wetty circumstances.

Learn more about  "orienteering compasses" here:

https://brainly.com/question/28136911

#SPJ4

Motion can be easily detected using infrared (IR) break-beam sensors. They function by emitting a beam of IR light that is invisible to humans from the emitter side.

They operate by having an emitter side that projects a beam of infrared light that is invisible to humans and a receiver side that is sensitive to the same light. The "beam is broken" and the receiver will alert you if something passes between the two that is not transparent to IR.

Through-beam sensors can identify and count minuscule components, spot object edges, and keep an eye on system passageways. According to the through-beam, the emitter and receiver are located in separate housings.

To know more about sensors work visit:-

https://brainly.com/question/13437049

#SPJ4

When utilizing a fire extinguisher, keep in mind the phrase PASS: Remove the pin. Holding the extinguisher with the nozzle pointed away from you, release the locking.

If you can remember the abbreviation PASS, which stands for Pull, Aim, Squeeze, and Sweep, it will be simple for you to remember how to use a fire extinguisher. Remove the pin. You'll be able to release the extinguisher as a result. Aim for the fire's base.

The 'PASS' system stands for Pull, Aim, Squeeze, and Sweep. It provides the user with the knowledge essential to use the extinguisher correctly by outlining the stages that should be followed and making clear what each step entails.

To know more about fire extinguisher pass visit:-

https://brainly.com/question/10983795

#SPJ4

Answer:

The light should be dimmed when looking at living (nearly transparent) cells because it allows for contrast to be increased

Coasting allows the wheels to rotate so as to recover static friction again. Driving an automobile downhill while having the clutch depressed, the gear stick in neutral, or both at once, is known as coasting.

Freewheeling is another term used to describe coasting. Driving while coasting has the effect of disengaging your wheels from the engine, making engine braking (using gears to slow down) impossible.

By coasting, we mean to let gravity and the motion of the car carry us down an incline. The concept of coasting is to deactivate the engine, which should reduce fuel consumption. But can coasting really save fuel?

Driving in neutral (coasting) does not truly conserve fuel, and it is a poor driving habit to cultivate. Driving on the coast can hasten the wear on your automobile because, as you move faster, you have to apply the brakes more forcefully, which can hasten brake deterioration.

To know more about Driving:

brainly.com/question/16442586

#SPJ4

The area in which a forklift may come in contact with objects or people, either with the rear end of the front forks, is the work zone.

An instrument used frequently on construction sites to lift heavy objects is referred to as a forklift. Depending on their lifting capabilities, forklifts are built to lift huge items. As work on a given project begins, numerous zones are created to enable the general public to avoid dangerous regions. There are no access points where the general public is prohibited from entering. Work Zones are places where both construction work and other daily activities are carried out. In order to prevent any fatalities, these work zones should take care of safety precautions. Yet, due to a lack of safety measures, some people pass away in these industrial zones every year.

Know more about Work Zone here:

brainly.com/question/14326713

#SPJ4

Teraflops is a measure of computing power, and terrahertz (THz) is a measure of frequency. In terms of size, teraflops is much bigger than terrahertz.

A teraflop is a unit of computing speed equal to one trillion floating point operations per second (FLOPS). Teraflops are used to measure the speed of a computer's processor and the performance of its hardware. Teraflops are typically used to measure the performance of high-performance computing systems, such as supercomputers, as well as graphics processing units (GPUs) and other specialized hardware. The higher the teraflop count, the faster the computer is capable of performing complex calculations and operations. Teraflops are also used to measure the performance of artificial intelligence (AI) systems, as well as to measure the performance of certain types of scientific calculations.

To learn more about teraflops

https://brainly.com/question/27970979

#SPJ4