Answer:
Your answer to this will be D) Use the same password for every account.
Explanation:
This is the only option you should not do. If someone gets access or hacks into one of your accounts, and all accounts to anything are the same password they will have all of your accounts.
Write a procedure ConvertToBinary that takes an input as a number from 0 to 16 (including 0 but not 16) and converts it to a binary number. The binary number should be returned as a list.
Sure, here's an example of a Python function that converts a decimal number to binary and returns the result as a list:
def ConvertToBinary(decimal):
binary = []
while decimal > 0:
remainder = decimal % 2
binary.append(remainder)
decimal = decimal // 2
return binary[::-1]
The function takes in an input decimal which is a number between 0 and 16 (not including 16) and uses a while loop to repeatedly divide the decimal number by 2 and take the remainder. The remainders are then appended to a list binary. Since the remainders are appended to the list in reverse order, the result is reversed by slicing the list [-1::-1] to give the proper order.
You can also add a check to make sure that the input is within the required range:
def ConvertToBinary(decimal):
if decimal < 0 or decimal >= 16:
return None
binary = []
while decimal > 0:
remainder = decimal % 2
binary.append(remainder)
decimal = decimal // 2
return binary[::-1]
this way you can make sure that the input provided is within the allowed range.
solve the MRS y,x = 12 mean? for constant mariginal utility?
answer
The MRS y,x = 12 means that the ratio of marginal utilities between two goods (y and x) is 12. This means that for every 12 units of good y the consumer will give up 1 unit of good x. This holds true if the consumer has constant marginal utility.
one example of FLAT artwork is tagged image file format which is a common computer what file
One example of FLAT artwork is the Tagged Image File Format (TIFF). TIFF is a common computer file format used for storing raster images.
What is the image file format about?It is a flexible format that can support a wide range of color depths and image compression methods. It is often used for high-quality images, such as those used in printing, and is supported by a wide range of image-editing software.
Therefore, based on the context of the above, TIFF files are FLAT artwork as they are a single, static image without any animations or interactivity.
Learn more about image file format from
https://brainly.com/question/17913984
#SPJ1
Directions :: Write a Ship class. Ship will have x, y, and speed properties. x, y, and speed are integer numbers. You must provide 3 constructors, an equals, and a toString for class Ship.
One constructor must be a default.
One constructor must be an x and y only constructor.
One constructor must be an x, y, and speed constructor.
Provide all accessor and mutator methods needed to complete the class.
Add a increaseSpeed method to make the Ship speed up according to a parameter passed in.
Provide an equals method to determine if 2 Ships are the same(i.e. in the same location).
You also must provide a toString() method.
The toString() should return the x, y, and speed of the Ship.
In order to test your newly created class, you must create another class called ShipRunner. There you will code in the main method and create at least 2 Ship objects (although you can create more if you like), using the constructors you created in the Ship class. Then you will print them out using the toString method and compare them with the equals method.
I'm trying to make an equals method I just don't know how to
Answer: Assuming this is in the java language.. the equals() would be
Explanation:
public boolean equals(Object o){
if(o == this){
return true;
}
if (!(o instanceof Ship)) {
return false;
}
Ship s = (Ship) o;
return s.x == this.x && s.y == this.y && s.speed == this.speed;
}
MTBF is a measurement of
A) the speed at which a storage device can read and write data
B) the number of digits used to store a computer file
C) the average length of a time a storage device can reliably hold data without it beginning to degrade
D) the average length of time between failures on a device
MTBF is a measurement of the average length of time between failures on a device. Thus, the correct option for this question is D.
What is MTBF in computers?MTBF stands for Mean time between failures. It is often utilized in order to measure the overall failure rates, for both repairable and replaceable/non-repairable products.
It governs the simplest equation for mean time between failure. It is as follows:
MTBF = total operational uptime between failures/number of failures.It is the predicted elapsed time between inherent failures of a mechanical or electronic system during the normal functioning of the computer system in order to detect an error.
Therefore, MTBF is a measurement of the average length of time between failures on a device. Thus, the correct option for this question is D.
To learn more about MTBF, refer to the link:
https://brainly.com/question/22231226
#SPJ1
Try it
Drag and drop each example under the appropriate heading.
taking breaks
reading in a crowded room
having resources nearby
cramming at the last minute
getting plenty of rest
starting your homework late at night
Intro
Good Study Habits
Bad Study Habits
Done
Bad habits include reading in a crowded room, starting your schoolwork late at night, and cramming right before the exam. Good habits include taking breaks, having resources close by, and getting lots of rest.
What are some poor study habits?Being uncoordinated. Being disorganized will simply make studying much more difficult because there are so many things to do and think about. Don't merely jot down notes and post reminders in random locations.
Why do I lose track of what I learn?If a student stays up all night studying for the test, they usually forget the material during it. The ability of the brain to retain information increases with regular study schedules and thoughtful revision, and the material is ingrained much more deeply.
To know more about Study Habits visit:-
https://brainly.com/question/28393347
#SPJ1
what is primary key? List any two advantage of it.
Complete a program that takes a weight in kilograms as input, converts the weight to pounds, and then outputs the weight in pounds. 1 kilogram = 2.204 pounds (lbs). Ex: If the input is: 10 the output is: 22.040000000000003 lbs Note: Your program must define the function def kilo_to_pounds(kilos)
Hello there!
def kilo_to_pounds(kilos):
____pounds = 2.204 * kilos
____return pounds
kilos = int(input())
print(kilo_to_pounds(kilos), 'lbs')
The program that takes a weight in kilograms as input, converts the weight to pounds, and then outputs the weight in pounds is in the explanation part.
What is programming?The process of carrying out a specific computation through the design and construction of an executable computer programme is known as computer programming.
Here is the completed program in Python:
def kilo_to_pounds(kilos):
pounds = kilos * 2.204
return pounds
# Main program
kilo_input = float(input("Enter weight in kilograms: "))
pounds_output = kilo_to_pounds(kilo_input)
print("Weight in pounds: ", pounds_output)
Thus, the kilo_to_pounds function takes a weight in kilograms as input and converts it to pounds using the conversion factor of 2.204.
For more details regarding programming, visit:
https://brainly.com/question/11023419
#SPJ2
Code to be written in Python:
Correct answer will get the brainliest!
Uyen decides to write a Python program to count towards the next birthday.
In order to do so, she plans to write a function count_days(start_date, end_date) which takes in the start date and end date in the string format, "dd/mm/yyyy", and returns the number of days between the start date and end date. The start date is included while the end date is not included in the count. Note that leading zeros in start_date and end_date are skipped if there are any (For example, the date 1st January 2017 will be in the format 1/1/2017).
Currently, Uyen has only completed a skeleton of count_days, and a few helper functions, which are provided below.
Your Tasks:
(a) Help Uyen complete the four functions marked with 'TODO'. They are get_day_month_year, less_than_equal, next_date and count_days.
(b) Uyen was quite careless, she didn't check for input data validity. You will also need to help her with this. We only proceed to count days if the dates are valid, and the start date is before or same as the end date.
Assume a valid date is between 1/1/1970 and 31/12/9999. The leap year and valid date check are already provided.
If one of the dates is not valid, throw an exception with a message that has the value: "Not a valid date: " + date, where date is the invalid date.
If the start date is after the end date, throw an exception with a message value: "Start date must be less than or equal end date."
Note: is_leap_year(year) and is_valid(d, m, y) are provided, you can make use of them.
Incomplete code:
def is_leap_year(year):
# DONE: do not need to modify
if year % 4 == 0 and year % 100 != 0:
return True
if year % 400 == 0:
return True
return False
def is_valid(d, m, y):
# DONE: do not need to modify
# d, m, y represents day, month, and year in integer.
if y < 1970 or y > 9999:
return False
if m < 1 or m > 12:
return False
if d < 1 or d > 31:
return False
if m == 4 or m == 6 or m == 9 or m == 11:
if d > 30:
return False
if is_leap_year(y):
if m == 2 and d > 29:
return False
else:
if m == 2 and d > 28:
return False
return True
def get_day_month_year(date):
# TODO: split the date and return a tuple of integer (day, month, year)
d = 1
m = 1
y = 1970
return (d, m, y)
def less_than_equal(start_day, start_mon, start_year, \
end_day, end_mon, end_year):
# TODO: return true if start date is before or same as end date
return False
def next_date(d, m, y):
# TODO: get the next date from the current date (d, m, y)
# return a tuple of integer (day, month, year).
return (d, m, y)
def count_days(start_date, end_date):
# date is represented as a string in format dd/mm/yyyy
start_day, start_mon, start_year = get_day_month_year(start_date)
end_day, end_mon, end_year = get_day_month_year(end_date)
# TODO: check for data validity here #
# if start date is not valid...
# if end date is not valid...
# if start date > end date...
# lazy - let the computer count from start date to end date
count = 0
while less_than_equal(start_day, start_mon, start_year, end_day, end_mon, end_year):
count = count + 1
start_day, start_mon, start_year = next_date(start_day, start_mon, start_year)
# exclude end date
return count - 1
Test Cases:
test_count_days('1/1/1970', '2/1/1970') 1
test_count_days('1/1/1970', '31/12/1969') Not a valid date: 31/12/1969
test_count_days('1/1/1999', '29/2/1999') Not a valid date: 29/2/1999
test_count_days('14/2/1995', '19/3/2014') 6973
test_count_days('19/3/2014', '19/4/2013') Start date must be less than or equal end date.
get_day_month_year('19/3/2014') (19, 3, 2014)
get_day_month_year('1/1/1999') (1, 1, 1999)
get_day_month_year('12/12/2009') (12, 12, 2009)
less_than_equal(19, 3, 2014, 19, 3, 2014) True
less_than_equal(18, 3, 2014, 19, 3, 2014) True
less_than_equal(20, 3, 2014, 19, 3, 2014) False
less_than_equal(19, 3, 2015, 19, 3, 2014) False
less_than_equal(19, 6, 2014, 19, 3, 2014) False
less_than_equal(18, 12, 2014, 19, 11, 2014) False
less_than_equal(18, 12, 2014, 19, 11, 2015) True
less_than_equal(31, 3, 2018, 29, 4, 2018) True
next_date(1, 1, 2013) (2, 1, 2013)
next_date(28, 2, 2014) (1, 3, 2014)
next_date(28, 2, 2012) (29, 2, 2012)
next_date(29, 2, 2012) (1, 3, 2012)
next_date(30, 4, 2014) (1, 5, 2014)
next_date(31, 5, 2014) (1, 6, 2014)
next_date(31, 12, 2014) (1, 1, 2015)
next_date(30, 5, 2014) (31, 5, 2014)
To complete the function get_day_month_year(date), we can split the date string using the / character as a delimiter and return a tuple of integers:
def get_day_month_year(date):
day, month, year = date.split('/')
return (int(day), int(month), int(year))
To complete the function less_than_equal(start_day, start_mon, start_year, end_day, end_mon, end_year), we can compare the year, month, and day of the start date to the year, month, and day of the end date and return True if the start date is less than or equal to the end date:
def less_than_equal(start_day, start_mon, start_year, end_day, end_mon, end_year):
if start_year < end_year:
return True
elif start_year == end_year:
if start_mon < end_mon:
return True
elif start_mon == end_mon:
if start_day <= end_day:
return True
return False
To complete the function next_date(d, m, y), we can first increment the day by 1 and check if the resulting date is valid. If it is not valid, we can set the day to 1 and increment the month by 1. We can continue this process until we reach a valid date:
def next_date(d, m, y):
d += 1
while not is_valid(d, m, y):
d = 1
m += 1
if m > 12:
m = 1
y += 1
return (d, m, y)
Finally, to complete the function count_days(start_date, end_date), we can add code to check the validity of the start and end dates, and throw an exception if either of them is not valid or if the start date is after the end date. We can do this by calling the is_valid function and the less_than_equal function:
def count_days(start_date, end_date):
start_day, start_mon, start_year = get_day_month_year(start_date)
end_day, end_mon, end_year = get_day_month_year(end_date)
if not is_valid(start_day, start_mon, start_year):
raise Exception("Not a valid date: " + start_date)
if not is_valid(end_day, end_mon, end_year):
raise Exception("Not a valid date: " + end_date)
if not less_than_equal(start_day, start_mon, start_year, end_day, end_mon, end_year):
raise Exception("Start date must be less than or equal end date.")
count = 0
while less_than_equal(start_day, start_mon, start_year, end_day, end_mon, end_year):
count = count + 1
start_day, start_mon, start_year = next_date(start_
Hope This Helps You!
Next, you begin to clean your data. When you check out the column headings in your data frame you notice that the first column is named Company...Maker.if.known. (Note: The period after known is part of the variable name.) For the sake of clarity and consistency, you decide to rename this column Company (without a period at the end).
Assume the first part of your code chunk is:
flavors_df %>%
What code chunk do you add to change the column name?
Answer:
You can use the rename function to change the column name. Here is an example code chunk:
flavors_df %>%
rename(Company = Company...Maker.if.known.)
This will rename the Company...Maker.if.known. column to Company. Note that the old column name is surrounded by backticks () because it contains a period, which is a special character in R. The new column name, Company`, does not need to be surrounded by backticks because it does not contain any special characters.
Explanation:
Steve works in human resources for a company with more than three thousand employees. He needs to send new insurance documents to each employee. Steve should _____.
A) use a digital ink pen to scan his handwritten notes from a meeting
B) send an e-mail to all employees and attach the insurance documents
C) call each employee and ask them to pick up the documents at his desk
D) create a presentation
The correct answer is B) send an email to all employees and attach the insurance documents. This is the most efficient and effective way for Steve to disseminate the insurance documents to all employees. It allows employees to access the documents electronically, at their convenience, and ensures that everyone receives the same information. Option A) using a digital ink pen to scan handwritten notes is not a viable option for distributing the insurance documents to all employees. Option C) calling each employee and asking them to pick up the documents at Steve's desk is also not practical, as it would be time-consuming and may not be convenient for all employees. Option D) creating a presentation is not relevant to the task at hand.
• Describe the core components and terminology of Group Policy.
The core components and terminology of the group policy are directory services and file sharing.
What is the group policy component?A GPO is a virtual object that stores policy-setting information and consists of two parts: GPO's and their attributes are saved in a directory service, such as Active Directory.
It essentially provides a centralized location for administrators to manage and configure the settings of operating systems, applications, and users.
File share: GPO's can also save policy settings to a local or remote file share, such as the Group Policy file share.
Therefore, the group policy's main components and terminology are directory services and file sharing.
To learn more about the group policy component, visit here:
https://brainly.com/question/14275197
#SPJ1
The user is able to input grades and their weights, and calculates the overall final mark. The program should also output what you need to achieve on a specific assessment to achieve a desired overall mark. The program should be able to account for MULTIPLE COURSES as well.
I have done some pseudocode. So to double check, please provide pseudocode and python code.
I do plan to use homework, quizzes and tests for the grades portion and using the exam as part of the desired mark portion.
Please follow the instructions above. LISTS are allowed to be used.
Answer:
def calculate_final_mark(courses):
final_mark = 0
total_weight = 0
for course in courses:
final_mark += course['mark'] * course['weight']
total_weight += course['weight']
return final_mark / total_weight
def calculate_required_mark(courses, desired_mark):
current_mark = calculate_final_mark(courses)
total_weight = 0
for course in courses:
total_weight += course['weight']
required_mark = (desired_mark - current_mark) / (1 - total_weight)
return required_mark
# Example usage:
courses = [
{'name': 'Math', 'mark': 80, 'weight': 0.4},
{'name': 'Science', 'mark': 70, 'weight': 0.3},
{'name': 'English', 'mark': 65, 'weight': 0.3},
]
final_mark = calculate_final_mark(courses)
print(f"Your final mark is {final_mark:.1f}")
desired_mark = 80
required_mark = calculate_required_mark(courses, desired_mark)
print(f"You need to score at least {required_mark:.1f} on your next assessment to achieve a final mark of {desired_mark}")
Accenture is one of several hundred companies that has signed on to the United Nations Global Compact (UNGC) Business Ambition pledge.
Answer: True
Explanation:
Accenture is one of several hundred companies that has signed on to the United Nations Global Compact (UNGC) Business Ambition pledge. The UNGC is a voluntary initiative that encourages businesses to align their operations and strategies with ten universally accepted principles in the areas of human rights, labor, environment, and anti-corruption. The Business Ambition pledge is a component of the UNGC that invites businesses to set ambitious, science-based targets to reduce greenhouse gas emissions in line with the goals of the Paris Agreement. Accenture is one of many companies that have committed to this pledge and to taking action to combat climate change and support sustainable development.
use router,switches and Hubs to design a simple network for maendeleo institute of Technology having 240 employees.The institute have five department: computer science has 100 employees ,information technology 60 employees ,Account 40 employees ,Human resource has 20 employees and marketing has 20 employees . Require: .network topology showing five network that corresponding to five department .use class C IP addresses (example 192.168.10.0/24) to show subnet ID and broadcast ID of each department , the IP address must not overlap .consider scalability .Give reason for your choice /decision
Answer:
To design a simple network for Maendeleo Institute of Technology with 240 employees, we could use a combination of routers, switches, and hubs.
Our network would consist of five separate networks, one for each department at the institute. We would use class C IP addresses, with a subnet mask of /24, to create the following subnets:
Computer Science department: 192.168.10.0/24
Information Technology department: 192.168.11.0/24
Account department: 192.168.12.0/24
Human Resource department: 192.168.13.0/24
Marketing department: 192.168.14.0/24
Each department would be connected to the network via a switch, which would allow for communication within the department and with other departments as needed. A router would be used to connect the individual department networks to the wider internet, and would also serve as a firewall to protect the network from external threats.
We would also include a hub in the network to allow for communication between devices within a department, as well as to provide additional connectivity and scalability.
Overall, our network design would provide each department with its own separate network, with the ability to communicate with other departments as needed. It would also be scalable, allowing for the addition of new devices and departments as the institute grows. The use of class C IP addresses and a /24 subnet mask would ensure that IP addresses do not overlap, ensuring efficient and reliable communication within the network.
Code to be written in python:
Correct answer will be automatically awarded the brainliest!
Since you now have a good understanding of the new situation, write a new num_of_paths function to get the number of ways out. The function should take in a map of maze that Yee Sian sent to you and return the result as an integer. The map is a tuple of n tuples, each with m values. The values inside the tuple are either 0 or 1. So maze[i][j] will tell you what's in cell (i, j) and 0 stands for a bomb in that cell.
For example, this is the maze we saw in the previous question:
((1, 1, 1, 1, 1, 1, 1, 1, 0, 1),
(1, 0, 0, 1, 1, 1, 0, 0, 1, 1),
(0, 1, 1, 1, 0, 0, 1, 1, 1, 0),
(1, 1, 0, 1, 1, 1, 1, 0, 1, 1),
(0, 1, 0, 1, 0, 0, 1, 0, 1, 0),
(1, 0, 1, 1, 1, 1, 0, 1, 1, 1),
(0, 1, 1, 1, 1, 1, 1, 1, 1, 0),
(1, 0, 1, 0, 0, 1, 1, 0, 1, 1),
(1, 0, 1, 1, 1, 0, 1, 0, 1, 0),
(1, 1, 0, 1, 0, 1, 0, 1, 1, 1))
Note: You should be using dynamic programming to pass time limitation test.
Hint: You might find the following algorithm useful:
Initialize an empty table (dictionary), get the number of rows n and number of columns m.
Fill in the first row. For j in range m:
2.1 If maze[0][j] is safe, set table[(0, j)] to be 1 because there's one way to go there.
2.2 If maze[0][j] has a bomb, set table[(0, k)] where k >= j to be 0. Since one cell is broken along the way, all following cells (in the first row) cannot be reached.
Fill in the first column. For i in range n:
3.1 If maze[i][0] is safe, set table[(i, 0)] to be 1 because there's one way to go there.
3.2 If maze[i][0] has a bomb, set table[(i, 0)] and all cells under it to be 0. The reason is same as for the first row.
Main dynamic programming procedure - fill in the rest of the table.
If maze[i][j] has a bomb, set table[(i, j)] = 0.
Otherwise, table[(i, j)] = table[(i - 1, j)] + table[(i, j - 1)]
Return table[(n - 1, m - 1)]
Incomplete code:
def num_of_paths(maze):
# your code here
# Do NOT modify
maze1 = ((1, 1, 1, 1, 1, 1, 1, 1, 0, 1),
(1, 0, 0, 1, 1, 1, 0, 0, 1, 1),
(0, 1, 1, 1, 0, 0, 1, 1, 1, 0),
(1, 1, 0, 1, 1, 1, 1, 0, 1, 1),
(0, 1, 0, 1, 0, 0, 1, 0, 1, 0),
(1, 0, 1, 1, 1, 1, 0, 1, 1, 1),
(1, 1, 0, 1, 0, 1, 0, 0, 1, 1),
(0, 1, 1, 1, 1, 1, 1, 1, 1, 0),
(1, 0, 1, 0, 0, 1, 1, 0, 1, 1),
(1, 0, 1, 1, 1, 0, 1, 0, 1, 0),
(1, 1, 0, 1, 0, 1, 0, 1, 1, 1))
maze2 = ((1, 1, 1, 1, 1, 1, 1, 1, 1),
(1, 1, 1, 1, 1, 1, 1, 1, 1),
(1, 1, 1, 1, 1, 1, 1, 1, 1),
(1, 1, 1, 1, 1, 1, 1, 1, 1),
(1, 1, 1, 1, 1, 1, 1, 1, 1),
(1, 1, 1, 1, 1, 1, 1, 1, 1),
(1, 1, 1, 1, 1, 1, 1, 1, 1))
maze3 = ((1, 0, 1, 1),
(1, 0, 1, 1),
(1, 0, 1, 1),
(1, 0, 1, 1),
(1, 0, 1, 0),
(1, 0, 0, 1))
Test Cases:
num_of_paths(maze1) 2
num_of_paths(maze2) 3003
num_of_paths(maze3) 0
A business wants to evaluate how much they're spending on their customers, versus how much their customers go on to spend. If they want to see how much a customer will spend during the time they're a customer, that measurement would be?
Since the business wants to evaluate how much they're spending on their customers, versus how much their customers go on to spend. The measurement that a business would use to evaluate how much a customer will spend during the time they are a customer is called Customer Lifetime Value (CLV).
What is Customer Lifetime Value (CLV)?CLV is a prediction of the net profit attributed to the entire future relationship with a customer. It is calculated by multiplying the average value of a sale by the number of repeat transactions and the average retention time.
Therefore, based on the above, CLV can be used to identify which customers are the most valuable to a business and to allocate resources accordingly.
Learn more about business from
https://brainly.com/question/28464469
#SPJ1
Can someone write a code that makes circles change colors. Name it update () function.
Using the knowledge in computational language in python it is possible write a code that makes circles change colors.
Writting the code:import PyQt5, sys, time,os
from os import system,name
from PyQt5 import QtCore, QtGui, QtWidgets
from PyQt5.QtCore import QPoint,QTimerEvent,QTimer,Qt
from PyQt5.QtWidgets import QWidget,QApplication,QMainWindow
from PyQt5.QtGui import QPainter
class Stoplight(QMainWindow):
def __init__(self,parent = None):
QWidget.__init__(self,parent)
self.setWindowTitle("Stoplight")
self.setGeometry(500,500,250,510)
def paintEvent(self,event):
radx = 50
rady = 50
center = QPoint(125,125)
p = QPainter()
p.begin(self)
p.setBrush(Qt.white)
p.drawRect(event.rect())
p.end()
p1 = QPainter()
p1.begin(self)
p1.setBrush(Qt.red)
p1.setPen(Qt.black)
p1.drawEllipse(center,radx,rady)
p1.end()
class Stoplight1(Stoplight):
def __init__(self,parent = None):
QWidget.__init__(self,parent)
self.setWindowTitle("Stoplight")
self.setGeometry(500,500,250,510)
def paintEvent(self,event):
radx = 50
rady = 50
center = QPoint(125,125)
p = QPainter()
p.begin(self)
p.setBrush(Qt.white)
p.drawRect(event.rect())
p.end()
p1 = QPainter()
p1.begin(self)
p1.setBrush(Qt.green)
p1.setPen(Qt.black)
p1.drawEllipse(center,radx,rady)
p1.end()
if __name__ == "__main__":
application = QApplication(sys.argv)
stoplight1 = Stoplight()
stoplight2 = Stoplight1()
time.sleep(1)
stoplight1.show()
time.sleep(1)
stoplight2.show()
sys.exit(application.exec_())
See more about python at brainly.com/question/29897053
#SPJ1
Which option best describes open source software?
a type of software used to bundle products together
a type of software used to sync up to Windows
a type of software that works well with almost all applications and drivers
a type of software that can be freely used and modified
Answer:
a type of software that can be freely used and modified.
An automotive company tests the driving capabilities of its self driving car prototype. They Carry out the test on various types of roadways specifically a racetrack chill rack and dirt road what are the examples of fair or unfair practices
It is to be noted that testing a self-driving car prototype on various types of roadways, such as a racetrack, hill rack, and dirt road, can be considered fair practice. It would only be unfair practice if the lives and property of humans are put at risk during the testing.
What is unfair practice?Unfair practices are behaviors that are neither just or fair. It would be deemed unjust to treat someone differently because of their color or gender, for example. Cheating or violating regulations to get an edge over others is also included. To develop a fair and just society, it is critical to constantly treat people with fairness and respect.
In this scenario, it is evident that endangering human life and property is unethical behavior.
Learn more about Unfair Practices:
https://brainly.com/question/14700715
#SPJ1
The most reliable way to store important files without having to worry about backups or media failure is ____________.
A) cloud storage
B) on a USB flash drive
C) on a hard disk drive
D) on an optical disc
Code to be written in python:
Correct answer will get brainliest! :)
For any positive integer S, if we sum up the squares of the digits of S, we get another integer S1. If we repeat the process, we get another integer S2. We can repeat this process as many times as we want, but it has been proven that the integers generated in this way always eventually reach one of the 10 numbers 0, 1, 4, 16, 20, 37, 42, 58, 89, or 145. Particularly, a positive integer S is said to be happy if one of the integers generated this way is 1. For example, starting with 7 gives the sequence {7, 49, 97, 130, 10, 1}, so 7 is a happy number.
Your task is to write a function compute_happy_numbers(range1, range2) , where range1 and range2 are each tuples of the form (lower_bound, upper_bound), and returns a tuple containing: (1) the number of happy numbers in range1, (2) the number of happy numbers in range2, (3) the number of the range (1 or 2) containing more happy numbers, or None if both ranges have the same number of happy numbers.
def compute_happy_numbers(range1, range2):
"""Your code here"""
Test Cases:
compute_happy_numbers((1,1), (1,1)) (1, 1, None)
compute_happy_numbers((1, 10), (11, 100)) (3, 17, 2)
Create a program for the given problems using one-dimensional array. Program to identify the highest value in the given numbers.
Answer:
Explanation:
Here's one way you could write a C program to identify the highest value in a given set of numbers using a one-dimensional array:
Copy code
#include <stdio.h>
int main() {
int nums[10]; // Declare an array of 10 integers
int i, max;
printf("Enter 10 numbers: ");
for (i = 0; i < 10; i++) {
scanf("%d", &nums[i]); // Read in the numbers
}
max = nums[0]; // Initialize max to the first number in the array
for (i = 1; i < 10; i++) {
if (nums[i] > max) { // Compare each number to the current max
max = nums[i]; // If a number is larger, update the max
}
}
printf("The highest value is: %d", max);
return 0;
}
A(n) ____ is a central computer that enables authorized users to access networked resources.
A) peripheral
B) server
C) application
D) LAN
Answer:
Server
Explanation:
Server is a central computer that enables authorized users to access networked resources.
A sequential circuit has one flip-flop Q, two inputs X and Y, and one output S. The circuit consists of a D flip-flop with S as its output and logic implementing the function D = X ⊕ Y ⊕ S with D as the input to the D flip-flop. Derive the state table and state dia- gram of the sequential circuit.
To derive the state table and state diagram of the sequential circuit, we first need to determine the possible states of the flip-flop Q, and the next states based on the input values X and Y and the current state of Q.
The state table for the sequential circuit would look like this:
Q(t) X Y Q(t+1) S
0 0 0 0 0
0 0 1 1 1
0 1 0 1 1
0 1 1 0 0
1 0 0 1 1
1 0 1 0 0
1 1 0 0 0
1 1 1 1 1
The state diagram for the sequential circuit would look like this:
S=0 S=1
------------ ------------
| 0 | | 1 | | 1 | | 0 |
------------ ------------
| | | | | | | |
------------ ------------
| | | | | | | |
------------ ------------
| | | | | | | |
What is flip-flop Q?
A flip-flop is a circuit that is used to store binary data in digital electronic systems. It is a type of latch circuit that is used as a memory element in digital logic circuits. Flip-flops can be either positive edge-triggered or negative edge-triggered, and can be either level-sensitive or edge-sensitive. The most common types of flip-flops are SR flip-flops, JK flip-flops and D flip-flops.
In this case, Q is a flip-flop that is used as a memory element in the sequential circuit. It stores the current state of the circuit and is used in the logic implementation of the circuit's function. The output of this flip-flop is used as an input to the next state of the circuit, and it's also the output of the circuit.
Learn more about flip-flop in brainly.com/question/16778923
#SPJ1
Will mark brainliest if correct!
Code to be written in python
A deferred annuity is an annuity which delays its payouts. This means that the payouts do not start until after a certain duration. Notice that a deferred annuity is just a deposit at the start, followed by an annuity. Your task is to define a Higher-order Function that returns a function that takes in a given interest rate and outputs the amount of money that is left in a deferred annuity.
Define a function new_balance(principal, gap, payout, duration) that returns a single-parameter function which takes in a monthly interest rate and outputs the balance in a deferred annuity. gap is the duration in months before the first payment, payout is monthly and duration is just the total number of payouts.
Hint: Note that duration specifies the number of payouts after the deferment, and not the total duration of the deferred annuity.
def new_balance(principal, gap, payout, duration):
# Complete the function
return
# e.g.
# test_balance = new_balance(1000, 2, 100, 2)
# result = test_balance(0.1)
Test Case:
new_balance(1000, 2, 100, 2)(0.1) 1121.0
Answer:
def new_balance(principal, gap, payout, duration):
def calculate_balance(interest_rate):
balance = principal
for i in range(gap):
balance *= (1 + interest_rate/12)
for i in range(duration):
balance *= (1 + interest_rate/12)
balance -= payout
return balance
return calculate_balance
Explanation:
Answer:
def new_balance(principal, gap, payout, duration):
# convert monetary amounts to cents
principal_cents = principal * 100
payout_cents = payout * 100
def balance(rate):
# calculate the interest earned during the deferment period in cents
interest_cents = principal_cents * (1 + rate) ** gap - principal_cents
# calculate the balance after the first payout in cents
balance_cents = interest_cents + principal_cents - payout_cents
# loop through the remaining payouts, calculating the balance after each one in cents
for i in range(duration - 1):
balance_cents = balance_cents * (1 + rate) - payout_cents
# convert the balance back to dollars and round it to the nearest cent
balance_dollars = round(balance_cents / 100)
return balance_dollars
return balance
test_balance = new_balance(1000, 2, 100, 2)
result = test_balance(0.1)
print(float(result))
You are given a design board with four input pins a 4-bit INDATA,
1-bit Load,Enable, and Clock; and one output, a 4-bit OUTDATA.
Build a sequential circuit that contains a register (Don’t forget to
trigger that register by the FALLING edge of the clock, Logisim’s default
is the opposite!).
The register is updated every clock cycle in which Enable is up. If
Load is down, the register is incremented, otherwise it is loaded with the
data asserted on the INDATA pin.
The register data output should be connected with the output pin
OUTDATA.
The steps to Build a sequential circuit that contains a register is given below
The first step is to connect the 4-bit INDATA input to the data input of a 4-bit register.Next, we need to connect the Load and Enable inputs to a multiplexer. The multiplexer will be used to select between the INDATA input and the output of the register.The multiplexer output should be connected to the input of the register.We also need to create an AND gate that will be used to trigger the register on the falling edge of the clock. The AND gate should have the Clock input as well as the Enable input as its inputs.The output of the AND gate should be connected to the clock input of the register.The output of the register should be connected to the OUTDATA output.Create a NOT gate and connect the Load input to it, and connect the output of the NOT gate to one of the multiplexer input.Connect the output of the register to the second input of the multiplexer.What is the design board about?To build a sequential circuit that contains a register, we can use a combination of logic gates, flip-flops, and multiplexers.
In the above way, the register will be updated every clock cycle in which the Enable input is high. If the Load input is low, the multiplexer will select the output of the register and it will be incremented.
Otherwise, the multiplexer will select the INDATA input and the register will be loaded with the data asserted on the INDATA pin. The output of the register will be connected to the OUTDATA output, providing the register data.
Learn more about design board from
https://brainly.com/question/28721884
#SPJ1
if there is an apple logo on my computer what operating system does it run on
Answer:Mac OS if there is a apple logo
write flow chart pseudocode and algorithm for a computation that perform balance,interest, withdrawal,in bank for Ethiopia?
Answer:
Flowchart:
Start
Input customer information (name, account number, etc.)
Calculate balance
Calculate interest
Prompt user to enter withdrawal amount
Calculate new balance
Print new balance
End
Pseudocode:
START
// Declare variables
DECLARE customerName
DECLARE customerAccountNumber
DECLARE customerBalance
DECLARE customerInterest
DECLARE withdrawalAmount
// Get customer information
INPUT customerName
INPUT customerAccountNumber
// Calculate balance
SET customerBalance = customerAccountNumber * customerInterest
// Calculate interest
SET customerInterest = customerBalance * 0.05
// Prompt user to enter withdrawal amount
INPUT withdrawalAmount
// Calculate new balance
SET customerBalance = customerBalance - withdrawalAmount
// Print new balance
PRINT customerBalance
END
Explanation:
Create a program that asks the user to input three integers. After saving the values, the
program should identify the maximum and minimum from the three numbers. The output
should read
The minimum number entered was….
The maximum number entered was….
Here is a Python program that asks the user to input three integers and then outputs the minimum and maximum number: