The mass of Neon in the ball is 5.18 grams when two balloons of the same volume where one contains 1.0 g helium and the other with Neon.
Given the mass of helium = 1g
The molar mass of helium (He) = 4g/mol
The mass of neon = m2
The molar mass of Neon (Ne) = 20.18 g/mol
Since the volume of two balloons is same, mass of the balloons depend on their molar masses respectively.
So, 1/4 = m2/20
m2 = 5.18g
Hence the mass of Neon in the balloon would be equal to 5.18g.
To learn more about Mass click here https://brainly.com/question/30337818
#SPJ4
how to convert 60 km to mph?
60 kilometers per hour (Km) is equal to 37.28 miles per hour.
Distance is the sum of an object's movements, regardless of direction. Distance can be defined and explained as the amount of space an object has covered, regardless of its starting or ending position.
Formula to be used:
mph = km/ 1.609
mph = 60/1.609
= 37.38 mph
The pace at which an object's position changes in any direction is referred to as its speed. The distance traveled in the relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity. You must always multiply or divide by 1.6 to determine MPH. When moving at 60 km/h, the calculation is 60/1.609344, or 37.28 mph.
Learn more about speed:
brainly.com/question/13943409
#SPJ4
what is the distance to the closest star
The distance to the closest star outside our solar system, Proxima Centauri, is about 4.24 light-years or approximately 40 trillion kilometers.
Proxima Centauri is part of the Alpha Centauri system, a triple-star system that also includes Alpha Centauri A and B.
While 4.24 light-years may sound relatively close in astronomical terms, it is still an enormous distance that is difficult to comprehend. For comparison, it would take the fastest spacecraft ever launched, the Parker Solar Probe, about 6,000 years to travel that distance. Even if we could travel at the speed of light, it would still take over 4 years to reach Proxima Centauri.
Scientists have been studying Proxima Centauri and its potential for hosting habitable planets, as well as planning missions to send probes to explore this system. However, the distance to even the closest star beyond our own solar system presents a significant challenge for space exploration and underscores the vastness of the universe we live in.
Learn more about distance here:
https://brainly.com/question/541239
#SPJ4
When one gallon of gasoline is burned in a car engine, 1.19 x 108 J of internal energy is released. Suppose that 1.00 x 108 J of this energy flows directly into the surroundings (engine block and exhaust system) in the form of heat. If 6.0 x 105 J of work is required to make the car go one mile, how many miles can the car travel on one gallon of gas?
The car can travel approximately 316 miles on one gallon of gas, assuming that all of the energy released by the combustion of the gasoline is used to make the car go one mile.
Energy, 1.00 x 10^8 J flows directly into the surroundings in the form of heat. The amount of energy that can be used to make the car go one mile is:
E = 1.19 x 10^8 J - 1.00 x 10^8 J = 0.19 x 10^8 J
Work, W = F × d
where W is the work done, F is the force required to move the car, and d is the distance traveled.
6.0 x 10^5 J of work is required to make the car go one mile,
F = W/d = 6.0 x 10^5 J / 1609 m = 372.9 N
miles per gallon = E / W = (0.19 x 10^8 J) / (6.0 x 10^5 J/mile) = 316 miles per gallon
To know more about the gallon, here
brainly.com/question/19638640
#SPJ4
The bet force on on a car is zero in both the the horizontal and vertical directions.which two situations could be true about the motion of the car
If the net force on a car is zero in both the horizontal and vertical directions, then the car is either at rest or moving with a constant velocity in a straight line.
What is force?In physics, force is a physical quantity that describes the interaction between two objects or systems. It is a vector quantity, which means that it has both magnitude and direction. Force is commonly measured in units of newtons (N). A force can cause an object to accelerate, change direction, or deform. For example, when a person pushes a shopping cart, they are applying a force to the cart, which causes it to accelerate and move in a certain direction. When a weight is placed on a spring, the weight exerts a force on the spring, causing it to deform. The magnitude of a force is directly proportional to the rate of change of momentum of an object. The direction of the force is in the direction of the change of momentum. According to Newton's second law of motion, the net force on an object is equal to the product of the object's mass and its acceleration: F = ma. Forces can be divided into various categories, such as contact forces (e.g., friction, tension) and non-contact forces (e.g., gravity, electrostatic forces). Understanding forces and their effects is important in a wide range of fields, including mechanics, materials science, and engineering.
Here,
If the car is at rest, then it is not moving at all, and the forces acting on it are balanced. In this case, the net force is zero in both the horizontal and vertical directions. If the car is moving with a constant velocity in a straight line, then it is in a state of uniform motion. This means that the car is moving at a constant speed in a straight line, and the forces acting on it are balanced. In this case, the net force is also zero in both the horizontal and vertical directions. It is important to note that if the net force on a car is not zero, then the car will accelerate in the direction of the net force. This means that its velocity will change, either in speed or direction or both.
To know more about force,
https://brainly.com/question/29044739
#SPJ1
For our first example of motion in a plane, suppose you are operating a radio-controlled model car on a vacant tennis court. The surface of the court represents the x-y plane, and you place the origin at your own location. At time t1=2. 0s the car has x and y coordinates (4. 0 m, 2. 0 m), and at time t2=3. 1s it has coordinates (7. 0 m, 6. 0 m). For the time interval from t1 to t2, find (a) the components of the average velocity of the car and (b) the magnitude and direction of the average velocity.
1) Suppose you reverse the car’s motion, so that it retraces its path in the opposite direction in the same time. Find the x-component of the average velocity of the car.
2) Find the y-component of the average velocity of the car.
3) Find the magnitude of the average velocity.
4) Find the direction of the average velocity
1) The x-component of the average velocity of the car is -3.0 m/s
2) The y-component of the average velocity of the car is 4.0 m/s
3) The magnitude of the average velocity is 5.0 m/s
4) The direction of the average velocity is 126.9 degrees
How did we get the values?(a) The components of the average velocity of the car are:
Average velocity in x-direction = (change in x-coordinate) / (time interval) = (7.0 m - 4.0 m) / (3.1 s - 2.0 s) = 3.0 m/s
Average velocity in y-direction = (change in y-coordinate) / (time interval) = (6.0 m - 2.0 m) / (3.1 s - 2.0 s) = 4.0 m/s
(b) The magnitude and direction of the average velocity can be found using the Pythagorean theorem and trigonometry. The magnitude is:
|average velocity| = sqrt((average velocity in x-direction)^2 + (average velocity in y-direction)^2)
= sqrt((3.0 m/s)^2 + (4.0 m/s)^2)
= 5.0 m/s
The direction of the average velocity is:
theta = arctan(average velocity in y-direction / average velocity in x-direction)
= arctan(4.0 m/s / 3.0 m/s)
= 53.1 degrees (measured counterclockwise from the positive x-axis)
So the magnitude of the average velocity is 5.0 m/s, and its direction is 53.1 degrees counterclockwise from the positive x-axis.
When the car retraces its path in the opposite direction in the same time, the change in the x-coordinate is negative. Therefore, the x-component of the average velocity is:
Average velocity in x-direction = (change in x-coordinate) / (time interval) = (4.0 m - 7.0 m) / (3.1 s - 2.0 s) = -3.0 m/s
The y-component of the average velocity does not change when the car retraces its path, so it is still 4.0 m/s.
The magnitude of the average velocity is still 5.0 m/s, because it depends only on the change in the x-coordinate and y-coordinate, which are the same regardless of the direction of motion.
The direction of the average velocity is now 126.9 degrees counterclockwise from the positive x-axis, because the car is moving in the opposite direction along the same line.
learn more about velocity: https://brainly.com/question/25749514
#SPJ1
I’m in need of help!!
Density is the measure of how much mass is contained in a given unit volume. Based on the data for the four samples, which of the following substances has the lowest density?
The substance with the lowest density is Sample 1 with a density of approximately 2.31 g/cm³ .
What is density of a given substance?Density is a physical property that describes the amount of mass per unit volume of a substance. It can be calculated by dividing the mass of a substance by its volume.
To determine the substance with the lowest density, we need to calculate the density of each sample using the formula:
density = mass / volume
Sample 1: density = 30 g / 13 cm³ ≈ 2.31 g/cm³
Sample 2: density = 72 g / 20 cm³ = 3.6 g/cm³
Sample 3: density = 22 g / 2 cm³ = 11 g/cm³
Sample 4: density = 103 g / 41 cm³ ≈ 2.51 g/cm³
Comparing the densities, we can see that Sample 3 has the highest density (11 g/cm^3) and thus it is not the substance with the lowest density. Sample 2 has a density of 3.6 g/cm³ , which is higher than both Sample 1 (2.31 g/cm^3) and Sample 4 (2.51 g/cm^3).
To know more about volume, visit:
https://brainly.com/question/13338592
#SPJ1
buck-boost transformers are typically available in sizes up to ? .
Buck-boost transformers are typically available in sizes up to 10kVA.
Buck-boost transformers can be used as isolating transformers and are usually used to lower or raise line voltage. They are available in a range of sizes, ranging from 50 volt amperes to 360 kVA. Additionally, buck-boost transformers are in compliance with NEC and are typically used to buck (lower) or boost (raise) the supply voltage a small amount, usually 5 to 27%. Buck Boost Transformers can protect connected equipment from damage by reducing or raising line voltage 5% to 20%. Primary and secondary lead wires can be interconnected for use as an autotransformer. For use in induction motors and air conditioning, lighting, and heating systems.
To know more about voltage please refer:
https://brainly.com/question/13521443
#SPJ4
fiberglass is a good insulator because it traps __________, which is not a good conductor.
Fiberglass is a good insulator because it traps air, that is not a good conductor.
Insulators are matter that do not conduct heat or electricity well and are often used to reduce or avert the transfer of heat or electricity between objects or environments. Fiberglass is a type of insulation material made of fine glass fibers that are woven together into a mass.
In inclusion to being a good thermal insulator, fiberglass is also a good acoustic insulator. The fibers can trap sound waves, reducing their transmission and absorption.
This makes fiberglass shelter commonly used in building construction to reduce noise transfer between rooms or from outside sources.
To know more about fiberglass:
https://brainly.com/question/29174621
#SPJ4
light in which the waves vibrate in only one direction
Light in which the waves vibrate in only one direction is called polarized light.
Polarized light is a type of light in which the electromagnetic waves oscillate in a single plane. This means that the electric field vector of the light waves is restricted to vibrate in only one direction perpendicular to the direction of propagation. In contrast, unpolarized light is light in which the electric field oscillates in all directions perpendicular to the direction of propagation.
Polarization can occur through various mechanisms, such as reflection, scattering, or transmission through certain materials called polarizers. Polarized light has a number of important applications in fields such as optics, photography, and electronics.
To know more about the Polarized light, here
brainly.com/question/29217577
#SPJ4
A 10.0 N force is applied to a 2.00 kg mass, what is its velocity of the mass at 10.0 s?
Answer:
The velocity of the mass after 10.0 seconds is 50.0 m/s.
Explanation:
Explanation: We can use the formula v = (F t)/m to calculate the velocity of the mass. Given that the force applied is 10.0 N, the mass is 2.00 kg, and the time elapsed is 10.0 s, we can substitute these values into the formula to get:
v = (10.0 N * 10.0 s) / 2.00 kg = 50.0 m/s
Therefore, the velocity of the mass after 10.0 seconds is 50.0 m/s.
What is law of universal gravitation meaning?
The law of universal gravitation states that every particle in the universe attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
The law states that every object in the universe attracts every other object with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
This means that the larger the masses of the objects and the closer they are to each other, the stronger the force of attraction will be. The law of universal gravitation helps explain many phenomena in the universe, including the orbits of planets and moons round their parent bodies, as well as the motion of stars and galaxies.
To know more about the law of universal gravitation, here
brainly.com/question/8824398
#SPJ4
A box weighing 25 N is lifted to a height of 1.1 m by sliding it up a ramp 3.2 m long. The person pushing the box exerts a force of 9.9 N.
What is the mechanical advantage of the ramp?
b. What is the machine's efficiency?
5. What is the power of a crane that lifts a 120 N load 14 m in 3.6 s?
Answer:
a. The mechanical advantage of the ramp is:
Mechanical advantage = length of ramp / height
Mechanical advantage = 3.2 m / 1.1 m
Mechanical advantage = 2.91
b. The efficiency of the machine is the ratio of output work to input work, expressed as a percentage. In this case, the output work is the work done on the box (force x distance), which is:
Output work = force x distance
Output work = 25 N x 1.1 m
Output work = 27.5 J
The input work is the work done by the person pushing the box, which is:
Input work = force x distance
Input work = 9.9 N x 3.2 m
Input work = 31.68 J
The efficiency of the machine is:
Efficiency = (output work / input work) x 100%
Efficiency = (27.5 J / 31.68 J) x 100%
Efficiency = 86.8%
Therefore, the efficiency of the machine is 86.8%.
c. The power of the crane is given by the formula:
Power = work / time
where work is the product of force and distance, and time is the duration over which the work is done.
In this case, the work done by the crane is:
Work = force x distance
Work = 120 N x 14 m
Work = 1680 J
The time taken to lift the load is 3.6 s. Therefore, the power of the crane is:
Power = work / time
Power = 1680 J / 3.6 s
Power = 466.7 W
Therefore, the power of the crane is 466.7 watts.
#CarryOnLearning
Explanation:
negatively charged particles in the outermost energy levels of the electron cloud
"Negatively charged particles in the outermost energy levels of the electron cloud are known as valence electrons."
Valence electrons are those that are located in an atom's highest energy state. The electron configuration and quantity of valence electrons of an element can be determined by the position of the element within a period.
The electrons in an atom's exterior shell, or energy level, are called valence electrons. For instance, the valence electrons of oxygen are six, with two in the 2s sub-shell and four in the 2p sub-shell. The valence electron arrangement of oxygen can be expressed as 2s²2p⁴.
A transition metal's interior shell has room for valence electrons. Typically, an atom with a closed shell of valence electrons is chemically inactive. A valence electron has the ability to emit or absorb photons as energy. The electrical conductivity of a substance is also governed by valence electrons.
To know more about charged particles:
https://brainly.com/question/29848631
#SPJ4
What is voltage divider formula?
Voltage divider formula is a circuit formula used to calculate the output voltage of a circuit that is divided between two resistors. It is [tex]Vout = Vinx(R2/(R1+R2)[/tex]
A voltage divider circuit consists of two resistors in series with an input voltage applied across them, and the output voltage is taken from the point between the two resistors. The voltage divider formula:
[tex]Vout = Vin x (R2 / (R1 + R2))[/tex]
Vout: circuit's output voltage of the circuit
Vin: circuit's input voltage
R1: circuit's resistance value of first resistor
R2: circuit's resistance value of the second resistor
The voltage divider formula shows that the output voltage of the circuit is proportional to the ratio of the two resistors. If the value of R2 is increased, the output voltage will increase, and if the value of R1 is increased, the output voltage will decrease.
Learn more about voltage divider here:
https://brainly.com/question/13824189
#SPJ4
If the index of refraction of a material is 2, this means that light travels- 2 times as fast in the material as it does in air.- 2 times as fast in vacuum as it does in the material.- 2 times as fast in the material than it does in vacuum.- 2 times as fast in air as it does in vacuum.- 1/2 as fast in air as it does in the material.
From the given data, the correct answer is: "Light travels 1/2 as fast in the material as it does in vacuum."
The index of refraction (n) of a material is defined as the ratio of the speed of light in a vacuum (c) to the speed of light in that material (v), or n = c/v. This means that if the index of refraction of a material is 2, the speed of light in that material is half (1/2) of the speed of light in a vacuum.
So, option E: "1/2 as fast in air as it does in the material" is the correct answer.
Learn more about refraction here: brainly.com/question/27932095
#SPJ4
physics textbook how many electrons make up a charge of -30.0uc
18.7245273 × 10¹⁰ electrons make up a charge of -30.0uc.
An electron is a negatively charged particle having a charge of -1.60217663 × 10-19 coulombs.
According to Planck's theory of quantum, the charge of any quantum particle is quantized which means that any charge is multiple of a fixed quanta of charge,
i.e.
Q = n.e
in the given question,
Q = 30 nC = 30 × 10-⁹ C
e = -1.60217663 × 10-¹⁹ C
so, the number of electrons "n" will be,
n = Q/e = (30 × 10-⁹ C)/(-1.60217663 × 10-¹⁹ C)
n = 18.7245273 × 10¹⁰ electrons
Learn more about electrons on
https://brainly.com/question/1255220?referrer=searchResults
#SPJ4
A bullet of mass m1 is fired horizontally with a speed vo into the bob of a ballistic pendulum of mass m2. The pendulum consists of a bob attached to one end of a very light rod of length l. The rod is free to rotate about a horizontal axis through its other end. The bullet is stopped in the bob. Find the minimum vo such that the bob will swing through a complete circle
The minimum velocity vo required for the bob to swing through a complete circle is:
[tex]vo = \sqrt\frac{(m1v02 + m2v02 - m2g2l2)}{m1}[/tex]
Using conservation of energy, we can solve for the minimum velocity required for the bob to swing through a complete circle.
The total initial energy of the system is:
[tex]Ei =\frac{1}{2} m1v02 +\frac{1}{2} m2v02[/tex]
The total final energy of the system is:
[tex]Ef = \frac{1}{2} m2vf2 + mg2l2[/tex]
where vf is the velocity of the bob after the collision and g is the gravitational acceleration.
Equating the initial and final energy, we have:
[tex]\frac{1}{2}m1v02 +\frac{1}{2} m2v02 =\frac{1}{2}m2vf2 + mg2l2[/tex]
Solving for vf, we have:
[tex]vf = \sqrt{} \frac{(m1v02 + m2v02)}{m2 - g2l2}[/tex]
The minimum velocity required for the bob to swing through a complete circle is given by the expression:
[tex]vo = \sqrt \frac{(m2vf2 + mg2l2)}{m1}[/tex]
Substituting the expression for vf, we have:
[tex]vo = \sqrt{ \frac{(\frac{m2(m1v02 + m2v02)}{m2 - g2l2})}{m1}[/tex]
[tex]vo = \sqrt\frac {(m1v02 + m2v02 - m2g2l2)}{m1}[/tex]
Therefore, the minimum velocity vo required for the bob to swing through a complete circle is:
[tex]vo = \sqrt\frac{(m1v02 + m2v02 - m2g2l2)}{m1}[/tex]
learn more about velocity Refer:brainly.com/question/17127206
#SPJ4
What is difference between kernel stack and pcb ?
The Kernel Stack and PCB (Process Control Block) are two crucial CPU memory management structures.
The temporary memory allotted to each process, known as the kernel stack, holds details about how the program was executed. It is used to store return addresses, local variables, and argument values.
The PCB, on the other hand, is a structure of permanent memory that houses details about the process, including its ID, the contents of its CPU registers, and its program counter.
As a process is running, the kernel stack is used to retain its state, and the PCB is used to store details about the process, such as its process ID, control registers, and program counter. When a process finishes running, the kernel stack is wiped, but the PCB stays in memory until the process is finished.
Learn more about kernel stack at
https://brainly.com/question/15027744
#SPJ4
what color indicates the lowest surface temperature for a star?
Red color Indicates the lowest surface temperature for a star. Astronomers are able to measure the temperature of a star's surface by comparing the spectrum of the star to that of a black body.
Surface Temperatures:
Surface temperature is the temperature of the surface. More specifically, it may refer to: surface air temperature, the temperature of the air near the earth's surface. Sea surface temperature, temperature of water near the surface of the ocean.
A star's temperature refers to its surface, which determines its color. The coolest stars are red, while the hottest are blue. Astronomers divide stars into different types based on their temperature. These types are O, B, A, F, G, K, and M, with O stars being the hottest and M stars the coolest. Each of these types is further divided into a subdivision from 0 to 9 to distinguish subtle differences in each star's spectral pattern, depending on the star's temperature.
Our Sun is a G-type star, a yellow star with a surface temperature of about 6,000°C or 11,000°F. Type A stars are hotter, whiter, and maintain a temperature of around 10,000°C or 18,000°F. The hottest B-type and O-type stars are blue, while the coolest M-type stars are red, with surface temperatures around 3,000°C or 5,400°F.
Learn more about spectrum:
https://brainly.com/question/29170484
#SPJ4
a test rocket is fired straight up from rest with a net acceleration of 20.0 m/s2. after 4.00 seconds the motor turns off, but the rocket continues to coast upward with no appreciable air resistance. what maximum elevation does the rocket reach?
The maximum elevation reached by the rocket is 81.5 meters. We utilize equations of motion for acceleration that is constant.
We can break down the motion of the rocket into two parts: the initial acceleration phase and the subsequent coasting phase.
During the initial acceleration phase, the rocket experiences a constant net acceleration of [tex]20.0 m/s^2[/tex]. Therefore, the velocity of the rocket after 4 seconds can be calculated as seconds can be calculated as:
v = u + at
where u is the initial velocity (which is zero in this case), a is the acceleration, and t is the time elapsed.
v =[tex]0 + 20.0 m/s^2 * 4.00 s[/tex]
v = 80.0 m/s
Next, we can calculate the maximum height reached by the rocket during the coasting phase. Since there is no appreciable air resistance, we can assume that the rocket experiences a constant deceleration equal to the acceleration due to gravity ([tex]-9.81 m/s^2[/tex]). Therefore, the maximum height reached by the rocket can be calculated as:
[tex]s = ut + (1/2)at^2[/tex]
where s is the displacement, u is the initial velocity (which is 80.0 m/s in this case), a is the deceleration (-9.81 m/s^2), and t is the time elapsed since the motor turned off (which is 4 seconds).
s = [tex]80.0 m/s * 4.00 s + (1/2)(-9.81 m/s^2)(4.00 s)^2[/tex]
s = 160.0 m - 78.48 m
s = 81.5 m
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
what is ca oh 2 molar mass
Ca(OH)2 has a molar mass of 74.092 g/mol.
Calcium hydroxide, sometimes referred to as slaked lime, has the chemical formula Ca(OH)2. It is an inorganic material that when solid appears white and powdered.
The atomic masses of each element in the periodic table must fist be determined.
Ca = 40.078 (Calcium)
O(Ozone) = 15.999
1.008 H(Hydrogen)
The following equation can be made:
40.078 + (15.999 + 1.008) × 2
40.078 + (17.007) × 2
40.078 + 34.014
= 74.092 g/mol
The molar mass, or molecular mass, of Ca(OH)2 is 74.093 grammes. Th molecule consists of one calcium atom, two oxygen atoms, and two hydrogen atoms. Their molar masses are totaled in this The molar mass of Ca(OH)2 is 74.092 g/mol.
To know more about Ca(OH)2 on
https://brainly.com/question/30582287
#SPJ4
Please answer this subject is science
1. 15 m
2. 71.5 m
3. not sure but maybe 10 9/13 s
how is information about magnetic fields recorded in rocks?
Information about magnetic fields in rocks is recorded through the alignment of magnetic minerals, such as magnetite, with the Earth's magnetic field at the time the rock was formed.
As magma or lava cools and solidifies, the magnetic minerals become "frozen" in place and retain the orientation of the Earth's magnetic field. By studying the magnetic orientation of rocks, scientists can determine the direction and strength of the magnetic field at the time the rock was formed, as well as track the movement of the Earth's magnetic poles over time.
This technique is called paleomagnetism and has been used to study the Earth's magnetic field history over millions of years.
To know more about the magnetic fields, here
brainly.com/question/14848188
#SPJ4
what is build an atom
how to calculate heat of vaporization given pressure and temperature
The required heat of vaporization is calculated when the pressure and temperature are given using the Clausius-Clapeyron equation.
The mathematical equation of Clausius-Clapeyron is given as,
ln(P₁/P₂) = -ΔHvap/R (1/T₂ - 1/T₁)
where,
P₁, P₂ are the vapour pressures at two temperatures T₁, T₂
ΔHvap is enthalpy of vapourization
R is gas constant
When the temperature reaches a certain level, known as the critical temperature, the heat of vaporisation entirely disappears.
Latent heat of condensation grows as pressure rises, while latent heat of vapourization decreases.
By substituting the required values in the above equation, we get the heat of vaporization value.
To know more about heat of vaporization:
https://brainly.com/question/2598092
#SPJ4
Two more balloon like objects were shot down over ___ and northern canada.
"Two more balloon like objects were shot down over the United States and northern Canada."
North American nations include Canada and the United States of America. Recent confirmation from the governments of both nations that balloon-like objects were shot down while passing over their territory.
There is a great deal of controversy regarding the items and how the various nations are handling them. They are tools used by the Chinese government to eavesdrop, according to the American government. Beijing, however, refutes the allegations and claims that their balloon was utilised for meteorological reasons. We cannot definitively say that all flying objects originate from China or serve one particular function because not all of them have been correctly identified.
To know more about United States:
https://brainly.com/question/81071
#SPJ4
What is the average power output of a weightlifter who can lift 250 kg a height of 2.0 m in 2.0 s?
The average power of the weightlifter who can lift 250kg a height of 2.0 m in 2.0s is 2500watts.
How to calculate power?Power is a measure of the effectiveness that a force producing a physical effect has over time.
Power can be calculated by dividing the work done by an object by time taken. However, according to this question, a weightlifter can lift 250 kg a height of 2.0 m in 2.0 s.
Power = mgh/t
Where;
m = massg = acceleration due to gravityh = heightt = timePower = 250 × 10 × 2 ÷ 2
Power = 2500watts
Learn more about power at: https://brainly.com/question/3854047
#SPJ1
why does warm, moist air start to uplift in the initial stages of thunderstorm development?'
Warm, moist air starts to uplift in the initial stages of thunderstorm development because of a combination of different lift mechanisms.
One of these is convective lift, which occurs when warmer air rises due to its buoyancy. This is because warm air is less dense than cooler air, and so it is more easily displaced by the cooler air. Another lift mechanism is orographic lift, which is the result of air being forced to rise as it moves over a mountain or hill. Finally, frontal lift occurs when a cold front moves into an area of warm, moist air, forcing it to rise. All of these lift mechanisms can combine to cause warm, moist air to be lifted and form a thunderstorm.
To know more about buoyancy please refer:
https://brainly.com/question/19168433
#SPJ4
The image below shows a force of 10 N being applied to an object. The force is being applied toward the right, and the object is accelerating toward the right. No other force is acting on the object. Examine the image, and then answer the question that follows.
A second force of 13 N is applied to the object. If this second force is applied toward the left while the first force is being applied toward the right, which of the following will occur?
A.
The object will immediately begin moving toward the left.
B.
The object will continue moving toward the right at the same speed.
C.
The object will continue accelerating toward the right.
D.
The object will immediately accelerate toward the left.
Answer:
the answer is A, the object will immediately begin moving toward the left.
__________ takes place when an object is given a charge by bringing it close to a charged object.
The answer is Induction. "Induction" takes place when an object is given a charge by bringing it close to a charged object.
Induction is that process in which an object acquiring a charge by coming into the contact with any of the charged object. During that induction, electric field of the charged object induces an electric field in the uncharged object.
This electric field creates an electric dipole moment in uncharged object, that causing its charges to move and redistribute themselves in such a way that object acquires the net charge. This process occurs without any of physical contact between two objects and is also used to charge the objects like capacitors.
Induction can also be used to create a current loop in any conductor, which can be used to measure or to detect the strength of the specific magnetic field.
To know more about Induction:
brainly.com/question/26366866
#SPJ4