Use the E2 mechanism to explain why when I is mixed with sodium ethoxide (NaOCH2CH3) in ethanol, the major product
is III, but when II is mixed with sodium ethoxide in ethanol, the major product is IV.

According to the question the reaction enthalpy is thus 10610 J / 0.278 moles = 38.3 kJ/mol.

Enthalpy is a thermodynamic property of a system that measures the total energy content of a system. It is a state function that is expressed in terms of internal energy, pressure, and volume of a system. Enthalpy represents the amount of energy that is associated with a chemical reaction or physical change.

The reaction is exothermic, meaning that heat is released during the reaction. The amount of heat released can be calculated with the equation q = mcΔT, where q is the heat released, m is the mass of the solution, c is the specific heat capacity of the solution, and ΔT is the change in temperature of the solution. Using the given data, the amount of heat released by the reaction can be calculated as q = (250 g)(4.184 J/g-K)(11.1 K) = 10610 J. The enthalpy change for the reaction can then be calculated by dividing the heat released by the number of moles of NaOH, which is 11.1 g / 40.00 g/mol = 0.278 moles. The reaction enthalpy is thus 10610 J / 0.278 moles = 38.3 kJ/mol.

To learn more about enthalpy

https://brainly.com/question/14047927

#SPJ1

Considering both the forward and the reverse directions,  the Bronsted acids in the reaction is  H₂S and CH₃NH₃⁺. The correct option is B.

The chemical reaction is as :

CH₃NH₂(aq) + H₂S(aq) ⇄ CH₃NH₃⁺(aq) + HS⁻(aq)

According to the Bronsted - Lowry theory, acids are the substance that will donates the H⁺ ion or the proton and it will forms the conjugate base.

In the forward reaction, the H₂S donates the proton to the CH₃NH₂.

In the reverse reaction, the CH₃NH₃⁺ will donates the proton to the HS⁻.

Hence, the Bronsted - Lowry acids in the reversible reaction are H₂S and CH₃NH₃⁺. The option B is correct.

To learn more about Bronsted acids here

https://brainly.com/question/148529

#SPJ1

Rhenium oxide is a chemical compound composed of rhenium and oxygen atoms. Its chemical formula is ReO3, and it is a black or dark gray solid with a crystalline structure. Rhenium oxide is a highly refractory material with a very high melting point and excellent thermal stability, which makes it useful in high-temperature applications such as furnace linings and electrical contacts. It is also used as a catalyst in various chemical reactions, including the production of synthetic ammonia and in the dehydrogenation of alcohols. Rhenium oxide is a relatively rare material and is generally produced as a byproduct of other mining and refining processes. It has a number of unique properties that make it valuable in a variety of industrial and scientific applications.

Answer:

D. something's that's produced during a chemical reaction

Answer:

Explanation:

The answer is Option D.

A substance that is produced during a chemical reaction.

for example in a chemical reaction A+B -----> C

here, reactants A and B react together to produce product C.

Mangrove trees' robust roots aid in stabilizing the soil and preventing soil erosion. This is especially crucial in swampy coastal locations, where the soil is frequently loose and prone to wind and wave erosion. Mangrove trees work to stabilize the coastline and stop land erosion by securing the soil in place.

Mangrove trees also aid in removing contaminants from the water, enhancing the quality of the water in coastal areas while serving as an essential home for a variety of wildlife species. Mangrove trees contribute significantly to environmental protection and are an essential component of coastal ecosystems.

Mangrove trees are crucial for environmental preservation because they hold the soil in place and stop erosion in marshy coastal areas. They also provide crucial habitats for numerous wildlife species, stabilize the coastline, and stop the land from being lost to erosion while enhancing water quality by filtering pollutants from the ocean.

Mangrove trees are an essential part of coastal ecosystems overall, and preserving them is essential for preserving a healthy and sustainable environment.

learn more about Mangrove trees here

https://brainly.com/question/19385367

#SPJ1

Reactant: C3H8 + O2 = Product:  CO2 + H2O

Reactant: Zn + HCI =  Product: ZnCl₂

Reactant: KI + Pb(NO3)2 = Product: KNO3 and PbI2

Reactant: Mg(CIO3)2 = Product: MgCl2 and O2

Reactant: F2 + KBr = Product: KF and Br2

Chemical reactions entail the conversion of one or more substances into novel species, thanks to the breaking and forging of chemical bonds.

Essentially, such transformations involve the reconfiguration of atoms and/or molecules, culminating in distinct chemical and physical attributes contrasting from those of the initial materials.

Learn about chemical reactions here https://brainly.com/question/11231920

#SPJ1

The mass (in grams) of the sample that will decay in 800 years, given that the half-life is 1600-years is 0.78 g

We shall begin our calculation by obtaining the number of half lives that has elapsed after 800 years. Details below:

n = t / t½

n = 800 / 1600

n = 0.5

Next, we shall determine the amount remaining after 800 years. Details below:

N = N₀ / 2ⁿ

N = 2.5 / 2^0.5

N = 1.77 g

Finally, we shall obtain the mass of the sample that has decayed in 800 years. Details below:

Mass that decay = N₀ - N

Mass that decay = 2.5 - 1.77

Mass that decay = 0.78 g

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ1

26.71 g mass of tin would be required to completely react with 1.20 L of 0.750 M HBr.

What is mass ?

Mass is a measure of the amount of matter in an object or substance. It is often expressed in units of grams (g) or kilograms (kg). Mass is a fundamental property of matter and is different from weight, which is the force exerted on an object by gravity and varies depending on the object's location. Mass can be measured using a balance or scale, and is an important factor in many chemical calculations and experiments, such as determining the amount of reactants needed for a reaction or the concentration of a solution.

First, we need to determine the number of moles of HBr in the solution:

moles of HBr = Molarity x Volume

moles of HBr = 0.750 mol/L x 1.20 L

moles of HBr = 0.900 mol

According to the balanced chemical equation, 1 mole of Sn reacts with 4 moles of HBr to produce 1 mole of SnBr₄. Therefore, the number of moles of Sn required can be calculated as:

moles of Sn = (moles of HBr) / 4

moles of Sn = 0.900 mol / 4

moles of Sn = 0.225 mol

The molar mass of Sn is 118.71 g/mol, so the mass of Sn required can be calculated as:

mass of Sn = moles of Sn x molar mass of Sn

mass of Sn = 0.225 mol x 118.71 g/mol

mass of Sn = 26.71 g

Therefore, 26.71 g of tin would be required to completely react with 1.20 L of 0.750 M HBr.

To know more about molarity, visit:

https://brainly.com/question/8732513

#SPJ1

Complete question is:  26.71 g mass in grams of tin would be required to completely react with 1.20 L of 0.750 M HBr in the chemical reaction. Sn(s) + 4 HBr(aq) → SnBr₄ (aq) + 2 H₂ (g)

The final temperature with Specific heat = 0.385 J/g °C for copper is 57.7 °C.

Specific heat is a measure of the amount of heat energy required to raise the temperature of a unit mass of a substance. It is a physical property of a material and is usually measured in units of J/(g °C) or J/(g K).

q = m * c * ΔT

where q is the heat absorbed (in joules), m is the mass of the substance (in grams), c is the specific heat (in J/(g °C)), and ΔT is the change in temperature (in °C).

Plugging in the values,

6.30 kJ = 500.0 g * 0.385 J/(g °C) * ΔT

Simplifying the equation, we get:

ΔT = (6.30 kJ) / (500.0 g * 0.385 J/(g °C))

ΔT = 32.7 °C

The final temperature of the copper is as follows:

25 °C + 32.7 °C = 57.7 °C

To know more about specific heat, click here

https://brainly.com/question/11297584

#SPJ1

Although, a part of your question is missing, you might be referring to this full question "How does crushing a candy to smaller pieces affect its digestion?"

Crushing the candy into smaller pieces increases the surface area of the solvent which will result in the reduction of digestion or dissolution.

Digestion is the process in which food taken is broken down into smaller components that can be absorbed into the bloodstream. Digestion helps in converting food into molecules, like glucose so that the body can utilize that energy for its growth and development.

While Crushing the candy into smaller pieces, we are increasing the surface area of the solvent which will result in the reduction of digestion or dissolution of the candy. Thus, the larger the size of the pieces, the slower will be the process of digestion. This physical process in which large pieces of food are cut and crushed into smaller pieces is known as mechanical digestion.

To learn more about digestion;

https://brainly.com/question/16315420

a. Wax melts near the flame of a burning candle because the kinetic-molecular theory states that the higher the temperature, the faster the molecules move. Since the flame of a burning candle is hot, the wax molecules move faster, allowing them to take up more space and eventually melt.

The kinetic-molecular theory is based on the following five fundamental principles:

A gas's average molecular lengths between its constituent molecules are significantly greater than their individual sizes. The volume occupied by the gas' molecules is negligible in comparison to the volume of the gas itself.Both the molecules and the container walls are not attracted to one another in a perfect gas.As physical objects, the molecules move erratically and continually and are governed by Newton's laws of motion. The molecules travel in a straight line until they come into contact with one another or the container walls. Collisions are totally elastic; even if the kinetic energies and orientations of two molecules may change during a collision, the total kinetic energy is preserved. Collision is not "sticky".The average gas molecule's kinetic energy and absolute temperature are directly correlated. Because individual molecules' velocities and kinetic energies will vary greatly, with some even experiencing zero velocities at some moments, the word "average" is significant in this context. This implies that all molecular motion would cease if the temperature dropped to absolute zero.

b. Due to the fact that the kinetic-molecular theory predicts that molecules move more slowly at lower temperatures, liquid water can be frozen into ice cubes in a freezer. The water molecules travel very slowly and arrange because a freezer is significantly colder than room temperature, which enables them to form ice cubes.

c. All matter is made up of a large number of tiny particles that are always in motion, according to the kinetic-molecular theory. When the ginger ale is poured into the glass, the velocity of the liquid's molecules causes them to spread out and fill the form of the vessel.

d. The kinetic-molecular theory states that the molecules in a liquid are in constant motion, and that when they move, they bump into each other, passing energy from one to the other. This energy causes the particles to move faster. As they move faster, they create turbulence that causes them to break away from the liquid surface. These particles then form a vapor, which is an invisible form of water called water vapor. As these particles accumulate together, they gradually evaporate from the swimming pool, eventually diminishing its water level.

e. Water vapor condenses inside house windows on cold days because the molecules of water vapor slow down and as they lose energy they no longer have enough kinetic energy to remain in the gaseous state. The molecules then condense and form liquid water droplets on cool surfaces such as windows.

f. Snow gradually disappears even when the temperature remains below freezing because the heat stored in the snow starts to melt the snow. This occurs even when the outside temperature remains at freezing or below because the heat is released from the snow and warms the surrounding air.

g. Solids and liquids cannot be compressed as much as gases because the particles of gases have more energy and thus more freedom of movement than particles of solids and liquids. The particles of gases can move around and can occupy larger spaces than particles of solids and liquids, allowing them to be compressed more effectively.

To know more about kinetic energy, visit:

https://brainly.com/question/15764612

#SPJ1

Answer:

20 valence electrons

Explanation:

The number of valence electrons in carbon (C), hydrogen (H), and chlorine (Cl) are 4, 1, and 7, respectively. The number of total valence electrons (TVE) in CH₂Cl₂ is calculated as follows-

TVE in CH₂Cl₂ = valence electrons in C + 2(valence electrons in H) + 2(valence electrons in Cl)

= 4 + 2(1) + 2(7)

= 20

Answer:

139.20856102 this is thee answer

Answer:

139,18

Explanation:

Answer 1:

During the summer months in the northern hemisphere (where the United States is located), Earth is in position C, which is when the northern hemisphere is tilted towards the sun.

Answer 2:

The highest tide occurs during the full moon phase, which is represented by position C in the diagram.

Answer 3:

A star that has a luminosity of 10^-2 is likely a red dwarf.

Answer 4:

Telescopes that observe short-wavelength radiation, such as X-rays and gamma rays, do not need to be placed in orbit around Earth because these wavelengths are absorbed by the atmosphere. Therefore, telescopes that observe these wavelengths are typically placed in space, outside of Earth's atmosphere.

Answer 5:

The student is likely demonstrating the relationship between the Earth and the Sun's gravitational pull. The ball represents the Sun, and the string represents the gravitational force pulling the Earth towards the Sun. The demonstration shows how the Earth orbits the Sun due to this gravitational force.

Gravitational force is described as a force that exists between any two objects in the universe that have mass.

It is the force that causes objects with mass to be attracted to each other. The magnitude of the gravitational force between two objects depends on their masses and the distance between them.

Along with the electromagnetic force, the strong nuclear force, and the weak nuclear force, gravity is one of the four fundamental forces of the universe.

Sir Isaac Newton initially introduced it in his law of universal gravitation, and Albert Einstein later elaborated on it in his theory of general relativity.

Learn more about Gravitational force at: https://brainly.com/question/27943482

#SPJ1

If 100.0 moles of H₂ and 40.0 moles of O₂, react to produce water, H₂ one is the limiting reactant.

When a chemical reaction is complete, the limiting reagent—also known as the limiting reactant or limiting agent—is the reactant that has been completely consumed. Since the reaction cannot proceed without this reagent, the amount of product that can be produced is constrained. Excess reagents or excess reactants are any reagents that are present in amounts greater than those necessary to cause a reaction with the limiting reagent.

Since the amount of product produced when the limiting reagent interacts entirely is defined as the theoretical yield, the limiting reagent must be identified in order to calculate the percentage yield of a reaction.

The limiting reactant is H₂ because it is the reactant that controls the amount of product produced. When 100 moles of H₂ and 40 moles of O₂ react, all of the H₂ will have been consumed, but there will still be O₂ left over. This means that the reaction was limited by the H₂ and that is the limiting reactant. The solution can be determined by using the following equation:

n(H₂) = 100.0 moles

n(O₂) = 40.0 moles

n(H₂) / (n(O₂) / 2) = ratio of H₂ to O₂

100.0 moles / (40.0 moles / 2) = 5.0

Since the ratio of H₂ to O₂ is 5.0, this indicates that there is more H₂ than O₂ and therefore H₂ is the limiting reactant in the reaction.

To know more about moles, visit:

https://brainly.com/question/20486415

#SPJ1

The experiment employing these pipettes would most likely have a 5% error rate.

When your estimate aims at a known, accurate figure, percent error is a useful metric. Use it to measure how near an estimate is to the actual value, in general. When an approximation value is near to the true value, there are fewer mistakes.

The percent error is the distinction between the estimated value and the actual value in relation to the actual value. In other words, the relative error is multiplied by 100 to calculate the percent error.

To know more about experiment visit:-

https://brainly.com/question/30055326

#SPJ1

According to the question, there are 5.857 x 10¹¹ molecules of C₁₂H₂₂O₁₁ in 205g of sucrose.

Molecules are the building blocks of all matter. They are composed of one or more atoms that are held together by covalent bonds, which are formed when electrons are shared between atoms. Molecules can exist as individual entities, but they often combine with other molecules to form larger structures, such as proteins, carbohydrates, and lipids. Molecules can also be found in all living things, from the smallest bacteria to the largest mammals.

This is calculated by taking the molecular weight of sucrose (342.34 g/mol) and dividing it by 205, the mass of the sucrose. This yields a ratio of 1 mol sucrose/ 1.6943 g sucrose. Multiplying this ratio by 205 yields 342.34 mol sucrose, which when multiplied by Avogadro's Number (6.022 x 10²³ mol) yields 5.857 x 10¹¹ molecules of C₁₂H₂₂O₁₁.

To learn more about molecules

https://brainly.com/question/475709

#SPJ1

The IUPAC name for this compound is 2,2-methyl-3ethylhexane.

The IUPAC terminology is based on the longest chain of carbons joined by a single bond, whether it be a continuous chain or a ring. Prefixes or suffixes are used to denote any modifications, regardless of whether they include multiple bonds or atoms other than carbon and hydrogen.

The International Union of Pure and Applied Chemistry's (IUPAC) suggested system for naming organic chemical compounds is used in chemical nomenclature (IUPAC). The Organic Chemistry Nomenclature publishes. It is the organisation most renowned for its work establishing nomenclature standards in chemistry and other scientific disciplines.

To know more about IUPAC name visit:-

https://brainly.com/question/30086566

#SPJ1

Explanation:

The observations that water rolls off a duck's back but thoroughly wets a head of human hair reveal that the surfaces of the duck feathers and human hair have different physical and chemical properties.

Duck feathers have a unique structure that helps them repel water. They are coated in a special oil that makes them hydrophobic, or water-repelling. The oil forms a layer on the surface of the feathers that prevents water from penetrating into the feather structure. Additionally, the feather structure is tightly packed and has a lot of surface curvature, which also helps to prevent water from sticking to the feathers. This is why water rolls off a duck's back.

In contrast, human hair does not have a hydrophobic coating, and its surface is relatively smooth. This means that water can easily stick to the surface of human hair and thoroughly wet it.

Overall, these observations reveal that the chemical nature of the surfaces of duck feathers and human hair are different, and that these differences have a significant impact on how they interact with water.

Answer:

The mass of the white solid calcium carbonate that forms is 0.300 g.

Explanation:

To calculate the mass of the white solid calcium carbonate that forms, we first need to determine the limiting reagent in the reaction between calcium nitrate and sodium carbonate. The balanced chemical equation for the reaction is:

Ca(NO3)2(aq) + Na2CO3(aq) → CaCO3(s) + 2NaNO3(aq)

From the equation, we can see that one mole of calcium nitrate reacts with one mole of sodium carbonate to produce one mole of calcium carbonate. Therefore, the limiting reagent is the one that produces the least amount of calcium carbonate.

To determine the limiting reagent, we need to calculate the moles of calcium nitrate and sodium carbonate used in the reaction:

Moles of calcium nitrate = volume of solution (L) x concentration (mol/L) = 25.0 L x 0.100 mol/L = 2.50 mol

Moles of sodium carbonate = volume of solution (L) x concentration (mol/L) = 0.0200 L x 0.150 mol/L = 0.00300 mol

Since the moles of sodium carbonate are much smaller than the moles of calcium nitrate, sodium carbonate is the limiting reagent.

The balanced chemical equation tells us that one mole of calcium carbonate is produced for every mole of sodium carbonate used. Therefore, the moles of calcium carbonate produced are also equal to 0.00300 mol.

Finally, we can calculate the mass of calcium carbonate produced using the molar mass of calcium carbonate:

Mass = moles x molar mass = 0.00300 mol x 100.1 g/mol = 0.300 g

Therefore, the mass of the white solid calcium carbonate that forms is 0.300 g.

4 moles of AgBr is produced

2 moles of Calcium nitrate is produced

Stoichiometry is used in calculating the quantities of the reactants and products in a chemical reaction as well as identifying the limiting reactant are all part of this process.

The reaction equation is;

[tex]CaBr_{2} (aq) + 2 AgNO_{3} (aq) ---- > 2 AgBr (s) + Ca(NO_{3} )_{2} (aq)[/tex]

If 2 moles of [tex]AgNO_{3}[/tex] produces 2 moles of AgBr

4 moles of [tex]AgNO_{3}[/tex] will produce 4 * 2/2 = 4 moles of AgBr

If 2 moles of [tex]AgNO_{3}[/tex] produces 1 mole of  Calcium nitrate

4 moles of [tex]AgNO_{3}[/tex] will produce 4 * 1/2
2 moles of  Calcium nitrate

Learn more about moles:https://brainly.com/question/31597231

#SPJ1

Li₃PO₄ + 3 Zn(NO₃)₂ → 3 LiNO₃ + Zn₃(PO₄)₂. In this balanced equation, one of the products is Zn₃(PO₄)₂. To ensure that the equation is balanced, we need 3 moles of Zn(NO₃)₂ for every 1 mole of Li₃PO₄.

In a chemical reaction, a product is a substance that is formed as a result of the chemical reaction. It is the end result of a chemical reaction, and it is produced by the rearrangement of atoms and/or ions of the reactants.

In the given equation, we end up with 1 mole of Zn₃(PO₄)₂ for every 3 moles of Zn₃(PO₄)₂. This means that the molar ratio of Zn₃(PO₄)₂ to Zn₃(PO₄)₂ is 1:3, indicating that we need three times as much Zn₃(PO₄)₂ as Zn₃(PO₄)₂ to balance the equation. Therefore, one of the products, Zn₃(PO₄)₂, must be produced in a smaller quantity than the other product, LiNO₃.

To know more about chemical reaction, visit:

https://brainly.com/question/29039149

#SPJ1

When thermal energy is being removed from a liquid and it starts to freeze, the temperature of the liquid will remains constant until all the liquid has frozen. This happens because the energy that is being removed is being used to break the bonds between the molecules in the liquid and to form a solid.

Once all the intermolecular bonds have been broken and the liquid has fully solidified, the temperature of the solid will continue to decrease with further cooling.

This process is known as latent heat of fusion, which is the amount of energy required to change a substance from a liquid to a solid state , without any change in temperature.

Learn more about thermal energy

https://brainly.com/question/8762871

Answer:

Sugar

Explanation:

Glucose is a carbohydrate. Carbohydrates are mainly used for quick energy inside cells, but they also play an important role in cell structure and communication. Carbohydrates are macromolecules called polysaccharides, meaning they are made of many sugars.

Answer:

I hope this helps :)

Explanation:

Immunohistochemistry (IHC) is a powerful technique that exploits the specific binding between an antibody and antigen to detect and localize specific antigens in cells and tissue, most commonly detected and examined with the light microscope.Jan 1, 2020

Elements on the transition metal has the highest tendency to gain are chromium and manganese.

Transition metals typically have the ability to lose electrons to form positive ions, rather than to gain electrons to form negative ions. However, some transition metals can gain electrons under certain conditions.

The tendency to gain electrons (electron affinity) generally increases across a period from left to right on the periodic table, and decreases down a group from top to bottom.

Among the transition metals, the element with the highest electron affinity is usually considered to be either chromium [Cr] or manganese [Mn]. Both of these elements have a relatively high electron affinity due to their electronic configurations and the proximity of their valence electrons to the nucleus.

However, it is important to note that electron affinity values can vary depending on the specific experimental conditions used to measure them.

Learn more about transition metal

https://brainly.com/question/2102444

The elements on the transition metal that have the highest tendency to gain are chromium and manganese.

Usually, transition metals form positive ions by losing electrons rather than gaining electrons to form negative ions. However, under certain conditions, some transition metals can gain electrons. The tendency to gain electrons is known as electron affinity.

This tendency generally increases as we go across a period from left to right in our periodic table and decreases while going down the group from top to bottom.

The element with the highest electron affinity, among the transition metals, is usually considered to be either manganese [Mn] or chromium [Cr]. Both of them have a relatively high electron affinity because of their electronic configurations and the proximity of their valence electrons to the nucleus.

To learn more about transition metals;

brainly.com/question/2102444

The balanced equation for the reaction of acetylene (C₂H₂) and oxygen (O₂) is; 2 C₂H₂(g) + 5 O₂(g) → 4 CO₂(g) + 2 H₂O(g) + heat

The coefficients in the balanced equation represent the stoichiometric ratio of the reactants and products in the chemical reaction. In this case, 2 molecules of acetylene (C₂H₂) react with 5 molecules of oxygen (O₂) to produce 4 molecules of carbon dioxide (CO₂) and 2 molecules of water (H₂O), along with the release of heat.

The balanced equation shows that the number of atoms of each element is the same on both the sides of the equation, in accordance with the law of conservation of mass.

To know more about acetylene here

https://brainly.com/question/20529866

#SPJ1

The answer is 14.8 grams, which is option (d).

Therefore keep in mind that we are using molecular masses here. Therefore, 58 0.5 g of sodium chloride and one more will be obtained. Divide the mass of Sodium chloride by its molar mass to determine the number of moles: 0.941 moles are equal to 55 g/58.44 g/mol. 55 g of Sodium chloride is therefore equal to 0.941 moles of Sodium chloride.

A unit of mass is a gramme. One kilogramme weighs one thousandth of a gramme. The weight of a cube of pure water that is one centimetre in size and four degrees Celsius was the original definition of a gramme. The gramme has the sign g.

To know more about grams visit:-

https://brainly.com/question/30526303

#SPJ1

Question:

How many grams are in 1.48 x10⁷μg?

1.48 x103³

1.48 x10¹³

1.48

14.8

none of the above

At 25°C, combine 47.0 mL of ethylene glycol (d = 1.11 g/mL; molar mass = 62.07 g/mol) with 50.0 mL of water (d = 1.00 g/mL) to create an antifreeze solution. The antifreeze solution's molarity is 0.0086 M if its density is 1.07 g/mL.

Antifreeze is an additive that reduces a water-based liquid's freezing point. To achieve freezing-point depression for cold conditions, an antifreeze combination is utilized. Common antifreezes also raise the liquid's boiling point, enabling a rise in coolant temperature. However, every typical antifreeze addition also has a lower heat capacity than water, which makes it less effective as a coolant when combined with water.

The combination of a solution's freezing and boiling temperatures depends on the amount of dissolved components present. Therefore, salts cause aqueous solutions' melting points to decrease. Although salts are widely used for de-icing, salt solutions should not be utilized in cooling systems as they cause metal corrosion. Because they typically have melting values that are lower than those of water, low molecular weight organic substances can be used as antifreeze. Alcoholic organic compound solutions, in particular, are useful. Since antifreezes were first made commercially available in the 1920s, they have all been composed primarily of alcohols such methanol, ethanol, ethylene glycol, and others.

Molarity = [tex]\frac{mole}{volume}[/tex]

To calculate the moles of ethylene glycol.

The mass of ethylene glycol is 47.0 mL × 1.11 g/mL = 52.17 g.

Since molar mass of ethylene glycol is 62.07 g/mol, the moles of ethylene glycol is:

[tex]\frac{52.17}{62.07}[/tex] = 0.84 mol

To calculate the total volume of the antifreeze solution. We know that the volumes of ethylene glycol and H₂O are 47.0 mL and 50.0 mL, respectively.

Therefore, the total volume of the antifreeze solution is 47.0 mL + 50.0 mL = 97.0 mL.

Finally, the molarity of the antifreeze solution can be calculated using the formula

Molarity = [tex]\frac{mole}{volume}[/tex]

Therefore, the molarity of the antifreeze solution is:

[tex]\frac{0.84}{97.0}[/tex] = 0.0086 M

To know more about Freezing point, visit:

https://brainly.com/question/3121416

#SPJ1

0.0882 moles of silver bromide (AgBr) will form.

calculating the number of moles of silver nitrate (AgNO₃) used in the reaction:

moles of AgNO₃ = mass / molar mass

The molar mass of AgNO₃ is:

AgNO₃: 107.87 + 14.01 + 3(16.00) = 169.87 g/mol

So, the number of moles of AgNO₃ used is:

moles of AgNO₃ = 15.0 g / 169.87 g/mol = 0.0882 mol

Since the reaction occurs in a 1:1 ratio of AgNO₃ to AgBr, the number of moles of AgBr produced will also be 0.0882 mol.

Therefore, 0.0882 moles of silver bromide (AgBr) will form.

learn more about silver bromide here

https://brainly.com/question/16958040

#SPJ1