Part A) The average number of drops per mL of benzene is 19.33 drops/mL
Part B) The average number of drops for the monolayer is 8.33 drops.
Part C) 0.43 mL of oleic acid/benzene is required to make a monolayer.
Part D) each drop of solution contains 0.00002 g of oleic acid.
Part E) one drop of oleic acid takes up roughly 0.000022 mL.
Part A) To find the average number of drops per mL of benzene, add the drops from each experiment and divide by the number of trials:
(21 drops + 20 drops + 17 drops) / 3 = (19.33 drops/mL)
Part B) We sum the values and divide by the number of values to determine the average number of drops for the monolayer:
(8 drops + 9 drops + 8 drops) / 3 = 8.33 drops
Part C) To calculate the mL of oleic acid/benzene required to produce a monolayer, multiply the average number of drops required for the monolayer by the mL per drop of benzene determined in Part A:
8.33 drops x (1 mL / 19.33 drops) = 0.43 mL
Part D) Using the concentration of the solution, we can determine how many grams of oleic acid are in one drop of the solution:
0.02 g/L = 0.00002 g/mL
Because the density of the solution is not specified, we presume it is the same as that of benzene, which is 0.879 g/mL. As a result, the mass of one mL of solution is:
0.879 g/mL x 1 mL = 0.879 g
The mass of oleic acid in one drop of the solution may now be calculated:
0.00002 g/mL / 1 mL x 1 drop = 0.00002 g/drop
Part E) We need to utilise the density of oleic acid, which is 0.895 g/mL, to calculate the volume in mL that one drop of oleic acid occupies:
0.00002 g / 0.895 g/mL = 0.000022 mL
For more such questions on benzene, click on:
https://brainly.com/question/14788042
#SPJ4
The probable question may be:
Part A) Using a graduated cylinder, you calibrate the pipet you will be using and the values you collect are as follows. What is the average number of drops per mL of benzene.
21 drops
20 drops
17 drops
part B) After calibration, you use the oleic acid/benzene solution to form a monolayer. It takes 8 drops , 9 drops and 8 drops before the layer on the water solution starts to make a bubble that does not go into solution. What is the average number of drops for your monolayer?
part C) Since we have the number of drops it takes to make a monolayer and we have the number of drops it takes to make one mL of benzene, we can determine the mL of oleic acid/benzene it takes to form a monolayer.
part D) Next we need to determine the mass of oleic acid in the monolayer. The concentration of the oleic acid/benzene solution is 0.02g/L. Calculate how many grams of oleic acid is in one drop.
part E) With this information, we now need to calculate the volume in mL the drop of oleic acid occupy using the density of 0.895 g/mL and the number of drops of oleic acid solution used.
Explain the octet rule. Why are hydrogen and helium exceptions to the octet rule?
Discuss electron configurations in your answer.
Hydrogen and helium have only one electron shell. The first shell has only one s orbital and no p orbital.Therefore, it has only two electrons. So, these elements are most stable when they have two electrons.
What do you mean by the term octet rule ?The octet rule states that an atom loses or gains an electron in order to achieve a stable electronic configuration. It defines the tendency of an atom to have eight electrons in the outermost shell.
Both helium and hydrogen are stable with two electrons in the valence shell rather than according to the octet rule. They only require the s2 orbital filled since they lack p-orbitals.
Thus, The electronic configuration of hydrogen is 1S¹ and He is 1s².
To learn more about octet rule, follow the link;
https://brainly.com/question/865531
#SPJ1
Marsupials are a group of mammals that give birth to very immature young and raise them in a pouch. Opossums, kangaroos, and Tasmanian devils are all marsupials. Marsupials are common in Australia and South America. Previously scientists thought marsupials originated in Australia, but new evidence confirmed that all marsupials evolved from a common ancestor in South America. What is the most likely explanation for why marsupials are related in Australia and South America? Group of answer choices A huge asteroid struck Earth and the impact broke the two continents apart. An ice age froze the ocean surface and marsupials migrated to Australia. The continents were once joined into a supercontinent that slowly broke apart. A series of earthquakes and volcanoes separated the two continents.
About 100 million years ago, in South America, marsupials first appeared. Australia, Antarctica, and South America were all connected at the time to form one large continent. Australia and Antarctica gradually separated from South America and developed into independent continents.
Why is marsupials more in Australia than South America ?
The diversity of marsupials is thought to be higher in Australia than in South America because there were no terrestrial placental mammals there in prehistoric Australia to compete with marsupials. The only other large mammal that uses hopping as its main mode of propulsion is the kangaroo.
To know more kangaroo, visit :
brainly.in/question/10247956
#SPJ1
Suggest a method for separating the peptides produced by chymotrypsin treatment.
Check all that apply.
1) Electrophoresis
2) Chromatography on a cationic column, at pH=7
3) Size exclusion chromatography
4) Chromatography on a anionic column, at pH=4
The method for separating the peptides produced by chymotrypsin treatment are Electrophoresis, Size exclusion chromatography. The correct option are 1) and 3).
The Electrophoresis will be used to separate the peptides based on the charge properties and the size. The Peptides with the net positive charge would be move towards the negative electrode, and while the peptides with the net negative charge would be move towards the positive electrode.
The Size exclusion chromatography can be used to separate the peptides on the basis of the size. The Peptides that are the larger would be elute the earlier, while the smaller peptides would be elute the later, as they will pass through the porous stationary phase. Therefore , the correct options are 1) and 3)
To learn ore about peptide here
https://brainly.com/question/21884818
#SPJ4
In the following acid-base reaction,
HPO42- is the
H2PO4- (aq) + NH3(aq) → HPO42- (aq) + NH4+(aq)
А
B
С
acid
conjugate
acid
conjugate
base
According to the Brnsted-Lowry acid-base theory, HPO4 is the conjugate base of H2PO4 and is thus.
A reaction in chemistry is what?When atoms' ionic bonds are generated or ruptured, chemical events take place. The chemicals that initiate a chemical change are known as reaction mixture, while the regard to the structure as a result of the reaction as known as products.
What does a reaction simply mean?An action made in response to anything is called a reaction. Your parents' reaction when you tell them you want to move out will show you how upset they are about it. The nature of a reaction is frequently physical. The behavior of a chemical when mixed with another material is referred to as a chemical reaction.
To know more about Reaction visit:
https://brainly.com/question/28984750
#SPJ1
What is the boiling point of 100% ethanol?
Answer:
Explanation:
The boiling point of 100% ethanol, or pure ethanol, at standard atmospheric pressure (1 atm or 760 mmHg) is approximately 78.37 degrees Celsius or 173.13 degrees Fahrenheit. This is slightly lower than the boiling point of water, which is 100 degrees Celsius or 212 degrees Fahrenheit at standard atmospheric pressure. However, the boiling point of ethanol can vary slightly depending on the pressure and the purity of the sample.
what is periodic table with masses?
The periodic table with masses is very useful as the atomic mass is the average number of protons and neutrons in atoms of a chemical elements, which allows for the natural abundances of the element's isotopes.
Generally, atomic mass of an element is defined as the number of times an atom of that element which is heavier than an atom of carbon taken as 12. Basically, one atomic mass unit is equal to one-twelfth of the mass of an atom of carbon 12 isotope.
In the modern periodic table atomic number is present at the upper left, or number of protons. And in the middle the letter is the symbol used for the element (e.g., H). And below is the relative atomic mass, as calculated for the isotopes found naturally on Earth. Finally at the very bottom is the name of the element (e.g., hydrogen).
Learn more about periodic table from the link given below.
https://brainly.com/question/11155928
#SPJ4
HELP! Out of the following compounds, identify the ones that are
polar covalent.
H2O
NCl3
AuCl3
ClO2
SF4
SO3
ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds, since all of these chemicals have a dipole moment.
What is polar covalent compound?Polar covalent compounds are electrical conductors. Polar compounds comprise chemical compounds held together through polar covalent bonds.
A polar compound is a chemical species that has two or even more atoms that are linked together by polar covalent bonds that share electrons irregularly. ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds, since all of these chemicals have a dipole moment.
Therefore, ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds.
To know more about polar covalent compound, here:
https://brainly.com/question/30420584
#SPJ1
what dangerous gas is produced by the decay of radium-226?
Answer:
Radium-226 decays by alpha particle radiation to an inert gas, radon-222, which also decays by alpha particle radiation.
Explanation:
The first law of thermodynamics states that the total energy in the universe is:a. decreasingb. increasingc. constantd. being converted to free energye. being converted to matter
The first law of thermodynamics states that the total energy in the universe is constant. This means that the total amount of energy in the universe is always the same, and it cannot be created or destroyed.
Energy can be converted from one form to another and transferred between objects, but the total amount of energy remains the same. For example, if two objects are interacting and one object gains energy, the other object must lose the same amount of energy. This is because energy can be neither created nor destroyed, and so the sum of the energy from both objects must remain the same. Mathematically, this can be expressed as: Energy before interaction = Energy after interaction. This law is often used in calculations to determine the amount of energy that an object has gained or lost in a given situation. The equation for calculating the change in energy (ΔE) is: ΔE = Efinal - Einitial
To learn more about thermodynamics click here https://brainly.com/question/30207871
#SPJ4
what is the formula for perchloric acid
The formula for perchloric acid is HClO₄.
Perchloric acid is a strong acid that contains one hydrogen atom, one chlorine atom, and four oxygen atoms. Perchloric acid is a highly corrosive and reactive chemical that is used in a variety of industrial processes, such as rocket fuel production, metal etching, and laboratory reagents.
It is also a common oxidizing agent and can be dangerous if handled improperly, as it can react violently with organic materials and other reducing agents.
To know more about the perchloric acid, here
brainly.com/question/29089251
#SPJ4
Matter is classified as a
A.homogeneous or heterogeneous mixture
B.substance or a mixture of substances
C.substance, only
D.mixture of compounds
Matter is classified as a substance or a mixture of substances.
Pure substances and mixtures are the two subgroups of matter. Elements and compounds are formed through the further division of pure substances.
Physically coupled structures known as mixtures can be disassembled into their component parts. One particular sort of atom or molecule makes up a chemical compound.
For each of the following key terms, match the correct definition. saturation temperature of saturation evaporation change of state from a liquid to a gas dew point change of state from a gas to a liquid relative humidity ratio of vapor pressure relative to vapor capacity condensation water vapor pressure equal to vapor capacity latent heat energy stored or released during a phase change
Answer:
saturation: a state in which a solution or a vapor is holding the maximum amount of solute or vapor that it can hold under the given conditions of temperature and pressure
temperature of saturation: the temperature at which a solution or a vapor becomes saturated at a given pressure
evaporation: the process by which a liquid changes to a gas or vapor below its boiling point
dew point: the temperature at which air becomes saturated with water vapor and dew or frost begins to form
relative humidity: the amount of water vapor in the air relative to the maximum amount the air could hold at a given temperature, expressed as a percentage
vapor pressure: the pressure exerted by a vapor in equilibrium with its liquid or solid phase at a given temperature
vapor capacity: the maximum amount of water vapor that can be held by the air at a given temperature and pressure
condensation: the process by which a gas or vapor changes to a liquid or solid
latent heat: the energy absorbed or released by a substance during a change of state (e.g., melting, boiling, condensing) that does not result in a temperature change
ratio of vapor pressure to vapor capacity: relative humidity
Do the fingerprints created by your gel electrophoresis provide conclusive evidence of who stole the vase? Explain.
Answer: Fingerprints are not conclusive evidence on their own.
Explanation:
The thief could have worn gloves and those fingerprints could belong to the owners. If the fingerprints don't match those of the owners', you would still need more evidence to prove that those belong to the killer, such as their whereabouts at the time the vase was stolen, motive, etc. Fingerprints are not conclusive evidence on their own.
A manufacturer of helicopter blades heat-treats a part as one of the
steps of the processing procedure. Heat-treating involves heating the metal up to a highly specific temperature and then quenching, or cooling it down quickly. The blades are made from an aluminum alloy and have a mass of 273 kg. Water is normally used for the quenching phase. If the water is at a temperature of 22 Celsius, how much water (in kg) would be needed to cool the blade from 300 Celsius to 50 Celsius?
External Data: The specific heat of water is Cp = 4,180 J/kg Celsius, and the specific heat of aluminum alloy is
Cp= 900 J/kg Celsius. The equation for calculating heat gained or lost by a material is Q = mCpΔT.
Make a scientific explanation that identifies mathematical relationships that can be used to answer the question. Reason how and why energy is transferred between the metal and the water.
The mathematical relationship that can be used to answer the question is the equation for calculating heat gained or lost by a material is Q = m * Cp * ΔT. Q is the amount of heat, m is the mass of the material, Cp is the material's heat capacity, and ΔT is the temperature difference.
The equation as follows:
Q = m * Cp * ΔT
tells us that the amount of heat (Q) gained or lost by a material is equal to the mass of the material (m) multiplied by its specific heat capacity (Cp) and the change in temperature (ΔT).
In this case, we can use this equation to calculate the amount of heat lost by the aluminum alloy blade and the amount of heat gained by the water during the quenching process. Since energy is conserved, the amount of heat lost by the blade must be equal to the amount of heat gained by the water. Therefore, we can set the two equations equal to each other and solve for the mass of water needed to cool the blade:
m * Cp * ΔT (blade) = m * Cp * ΔT (water)
273 * 900 * (300 - 50) = m * 4,180 * (50 - 22)
273 * 900 * 250 = m * 4,180 * 28
m = 524.8 kg
Therefore, 524.8 kg of water would be needed to cool the blade from 300 Celsius to 50 Celsius.
Learn more about heat lost or gained at https://brainly.com/question/4002926
#SPJ11
colligative properties depend only on solute concentration; the identity of the solute is not important. True or False?
The given statement is " colligative properties depend only on solute concentration; the identity of the solute is not important" is true as it will depend on the ratio of the number of the particles of the solute and the solvent in the solution,
The Colligative properties of the solutions are the properties that will depend upon the concentration of the solute molecules or the ions, but it will not upon the identity of solute. The Colligative properties are such as the vapor pressure lowering, the boiling point elevation, the freezing point depression, and the osmotic pressure.
The one of the properties of the solution is the colligative property if it will depends only on the ratio of the number of the particles of the solute and the solvent in the solution.
To learn more about colligative properties here
https://brainly.com/question/10323760
#SPJ4
Place these hydrocarbons in order of decreasing boiling point. Rank from highest to lowest boiling point. To rank items as equivalent, overlap them.1. hexadecane, C16H342. paraffin, C25H523. octane, C8H184. 2,2,4-trimethylpentane, C8H185. propane, C2H8
The correct order of decreasing boiling point is: paraffin, C₂₅H₅₂ > hexadecane, C₁₆H₃₄ > 2,2,4-trimethylpentane, C₈H₁₈ ≈ octane, C₈H₁₈ > propane, C₃H₈
The boiling point of a hydrocarbon is primarily determined by its molecular weight and the strength of its intermolecular forces. Generally, hydrocarbons with higher molecular weights and stronger intermolecular forces have higher boiling points.
Therefore, we can rank these hydrocarbons in decreasing boiling point order based on their molecular weight. paraffin, C₂₅H₅₂, hexadecane, C₁₆H₃₄, 2,2,4-trimethylpentane, C₈H₁₈, octane C₈H₁₈, propane, C₃H₈.
Hydrocarbons are the organic compounds that contain only carbon and hydrogen atoms. Hydrocarbons have various industrial applications, such as fuel for internal combustion engines, heating, and electricity generation.
To know more about hydrocarbon here
https://brainly.com/question/12433190
#SPJ4
Which substance is most likely
to be corroded by a base?
An iron nail
A zinc statue
A leather saddle
A steel beam
Answer:
an iron nail
Explanation:
iron metal can be corroded in a basic medium,
so iron nail can be corroded by a base
Answer: A leather saddle
Explanation:
What is NO compound called?
NO is called nitric oxide.
NO is a chemical compound composed of one nitrogen atom and one oxygen atom. It is a colorless gas that is a free radical, meaning it has an unpaired electron. Nitric oxide is an important signaling molecule in many physiological and pathological processes in the human body.
It plays a crucial role in the regulation of blood pressure, immune system function, and neurotransmission. Nitric oxide is also involved in the formation of smog and acid rain in the atmosphere, as well as in the production of fertilizers and explosives in industry.
To know more about the compound, here
brainly.com/question/9674829
#SPJ4
when balancing a chemical equation, it is usually best to begin with the __________.
b.) When balancing a chemical equation, it is usually best to begin with the most complicated molecule
Making ensuring that each element has the same number of atoms on both sides of the equation is the definition of balancing a chemical equation. This is significant because the number of atoms in each element must remain constant throughout a chemical reaction because the law of conservation of mass states that matter cannot be produced or destroyed. A chemical equation must have the same amount of atoms of each element in both the reactants (substances that are combined) and the products (substances that are formed) in order to be balanced. In order to balance the equation, coefficients—numbers placed in front of chemistry formulas—are typically added to the reactants and products.
To know more about chemical equation:
https://brainly.com/question/30087623
#SPJ4
Correct Question
When balancing a chemical equation, it is usually best to begin with the _______________.
a. simplest molecule
b. most complicated molecule
c. products
d. reactants
Mass (g) to mass (g)
2Na + 2H2O >2NaOH+ H2
How many moles of NaOH are produced if 120 grams of H2O are available?
Answer:
4.44 g
Explanation:
First, we need to determine the limiting reactant. The balanced chemical equation is:
2Na + 2H2O → 2NaOH + H2
From the equation, we see that 2 moles of sodium reacts with 2 moles of water to produce 1 mole of hydrogen.
Moles of Na in 120 g of Na:
Molar mass of Na = 22.99 g/mol
Number of moles of Na = mass/molar mass = 120 g / 22.99 g/mol = 5.22 mol
Moles of water in 80 g of H2O:
Molar mass of H2O = 18.02 g/mol
Number of moles of H2O = mass/molar mass = 80 g / 18.02 g/mol = 4.44 mol
Since 5.22 moles of Na requires 5.22 moles of H2O, water is the limiting reactant.
The moles of hydrogen produced is equal to the moles of the limiting reactant, which is 4.44 mol.
The mass of hydrogen produced is:
Mass = number of moles x molar mass
Mass = 4.44 mol x 1 g/mol = 4.44 g
So the grams of hydrogen produced by the 120 grams Na and 80 grams of water is 4.44 grams.
A chef finds a sealed container consisting of an ingredient that goes into his restaurant’s secret sauce. The ingredient’s molecules are moving in place. What will happen if the chef causes the ingredient to change phase by transferring energy into it?
After the phase change, the ingredient’s molecules will move . . .
answer choicesa. faster, and the ingredient will be a solid.
b. faster, and the ingredient will be a liquid.
c. slower, and the ingredient will be a solid.
d. slower, and the ingredient will be a liquid.
b. faster, and the ingredient will be a liquid.
The irreversible elementary reaction 2A → B takes place in the gas phase in an isothermal tubular (plug-flow) reactor. Reactant A and a diluent C are fed in equimolar ratio, and conversion of A is 80%. If the molar feed rate of A is cut in half, what is the conversion of A assuming that the feed rate of C is left unchanged? Assume ideal behavior and that the reactor temperature remains unchanged. What was the point of this problem?
The point of this problem was to show how the conversion of a reaction can be affected by changes in the molar feed rate of one of the reactants.
What is reactants?Reactants are the substances that take part in a chemical reaction. They are the substances that enter into the reaction and are changed into the products of the reaction. Reactants are the starting materials that are used to form the products. Reactants can be elements, compounds, or mixtures of substances. Reactants must interact with each other in order for a chemical reaction to occur. Reactants are consumed during the reaction, and the products are what is left over after the reaction has taken place. Reactants are also known as substrates in biochemistry.
The conversion of A would be 40%.
To learn more about reactants
https://brainly.com/question/29470602
#SPJ1
A student accurately measured the volume of a solution, but spilled some before measuring solution mass. What is the effect on calculated solution density?
The calculated solution density is lower than the actual density
The predicted mass of the solution will fall short of the actual mass of the solution if the student spilled part of the solutions prior to taking the mass measurement.
What is the solution's total mass?After we have the masses of the solute and solvent, we may add them to determine the mass of both the solution. Masses are always additive. Hence, we may determine the solution's density by knowing its mass and volume.
What are the meanings of the terms "solute" and "solution mass"?Mass or moles are used to describe the solute's concentration. A solution's mass percent is computed by dividing the grams of component per grams of solutions by 100 to arrive at the percentage. The mass of each element in a mole of the compound as well as its molar mass are both solved by using the Mass Percent formula.
To know more about mass of the solution visit:
https://brainly.com/question/15963243
#SPJ4
Calculate the mass of iron sulphide produced when 320g of sulphur is reacted with excess iron
The concept stoichiometry is used here to determine the mass of iron sulphide produced. The mass of FeS formed from 320g of sulphur is 878.5 g.
What is stoichiometry?The stoichiometric concept is generally used for the calculations of masses and sometimes the volumes and reactants and products involved in a chemical reaction. The relationship between the amounts of reactants and products can be obtained in a chemical reaction.
Molar mass of 'Fe' = 55.85 g/mol
Molar mass of 'S' = 32 g/mol
The molar mass of FeS = 55.85 + 32 = 87.85 g/mol
The reaction between 'Fe' and 'S' is:
Fe + S → FeS
Here 1 mole of FeS is formed from 1 mole of 'S'.
The amount of FeS formed by 32 g 'S' = 87.85 g
The amount of FeS formed by 320 g of 'S' = (320 × 87.85) / 32 = 878.5 g.
Thus the mass of 'FeS' produced is 878.5 g.
To know more about stoichiometry, visit;
https://brainly.com/question/19730733
#SPJ9
Calculate the wave length of hello light emitted by sodium lamp if the frequency of the radiation is 5x10to the power of 4
6.0×10⁵m is the wavelength of hello light emitted by sodium lamp if the frequency of the radiation is 5x10⁴.
What is wavelength?A periodic wave's wavelength is its spatial period, or the length over which its form repeats. It is a property of the both traveling waves as well as standing waves in addition to different spatial wave patterns. It refers to the distance between two successive corresponding locations of the same phase just on wave, such as two nearby crests, troughs, and zero crossings.
The spatial frequency is the reciprocal of wavelength. The Greek letter lambda is frequently used to represent wavelength. The term wavelength also was occasionally used to refer to modulated waves, their sinusoidal envelopes, or waves created by the interaction of several sinusoids.
ν=c/λ
5x10⁴=3×10⁸/λ
λ =3×10⁸/ 5x10⁴
=6.0×10⁵m
Therefore, 6.0×10⁵m is the wavelength.
To know more about wavelength, here:
https://brainly.com/question/12377285
#SPJ9
in which type of extracellular fluid can an animal cell undergo lysis?
Explanation:
An animal cell can undergo lysis in a hypertonic solution.
what the phase change in which a solid goes directly to the gas state.?
Sublimation is the term used for the phase change in which a solid goes directly to the gas state.
Generally, sublimation is defined as the process in which a solid usually transforms into a gas phase without first melting in order to form a liquid phase.
Sublimation is generally defined as the conversion of a substance from the solid to the gaseous state without becoming liquid. Let's consider an example, is the vaporization of frozen carbon dioxide (dry ice) at ordinary atmospheric pressure and temperature. The phenomenon is the result of vapor pressure and temperature relationships.
Hence, sublimation is the term used for the phase change in which a solid goes directly to the gas state.
Learn more about sublimation from the link given below.
https://brainly.com/question/29304516
#SPJ4
why fuse wire is made of an alloy of lead and tin?
what part of the curve corresponds to the optimum buffer action for the acetic acid/acetate ion pair?
The acetic anhydride ion pair's ideal buffer action is represented by point V on the curve.
What purpose does a buffer system like acetate acetic acid serve?In order to avoid pH variations that can impair the biochemical action of these molecules, acetate buffers are utilized in biosynthetic pathways of catalysts and other biochemical compounds of cells.
What does the acetate buffer do?The inhibitory effect of the acetate buffer mixture is brought on by sodium and acetic acid's interaction with the protoplasm. Whether the color solution is comprised up of borate and phosphate buffer combination at pH 7.85, the inhibitory impact of acetic acid or acetic buffer mixture is evident.
To know more about acetic acid visit :
https://brainly.com/question/15202177
#SPJ1
what is definition of catalyst ?
In chemistry, a catalyst is any substance that accelerates a reaction without being consumed. Enzymes are contains natural catalysts that are responsible for many important biochemical reactions.
Just about all solid catalysts are steels or their oxides, sulfides, and halides, as well as the semimetallic components boron, aluminum, and silicon. Gaseous and liquid catalysts were also commonly for use in their pure or in conjunction with suitable carriers but rather solvents.
Solid catalysts are widely diffused in other substances known as photocatalysts. In general, a toxic effect is a reaction between a catalyst and a reactant that produces chemical intermediates capable of reacting more readily between themselves or with another reactant to produce the desired end product.
The precursor is regenerated during the reactions between the precursors and the reactants. The modes of reaction between catalysts and the heterogeneous catalysts vary greatly and are frequently complex in solid catalysts.
learn more about catalyst here :
https://brainly.com/question/24430084?referrer=searchResults
#SPJ4