James Hutton was an important eighteenth-century English geologist and proponent of uniformitarianism. So option B is correct.
Uniformitarianism is the idea that the processes that have shaped the Earth in the past continue to operate in the same way in the present.
To put it another way, the Earth will continue to be progressively shaped by geological processes like erosion, deposition, and volcanic activity for a very long time to come.
This is as opposed to catastrophism, the possibility that the Earth was formed by unexpected, devastating occasions like floods or quakes, which was the predominant hypothesis at that point.
To learn more about Uniformitarianism:
https://brainly.com/question/12724361
#SPJ4
A spring (k = 953 N/m) is hanging from the ceiling of an elevator, and a 4.2-kg object is attached to the lower end. By how much does the spring stretch (relative to its unstrained length) when the elevator is accelerating upward at a = 0.79 m/s2?
The spring stretches 0.0432 m relative to its unstrained length when the elevator accelerates upward at 0.79 m/s2.
What is spring stretches?Spring stretches are exercises that involve stretching and lengthening the muscles to improve flexibility, range of motion, and posture. These stretches are typically performed in a dynamic manner, meaning they involve movement and active engagement of the muscle.
The force on the spring due to the acceleration is equal to the weight of the object, which is equal to mg = 4.2 kg * 9.8 m/s2 = 41.16 N. The spring constant k is equal to 953 N/m.
Using Hooke's Law, we can calculate the stretch of the spring:
Stretch = F/k = 41.16 N/953 N/m = 0.0432 m
The spring stretches 0.0432 m relative to its unstrained length when the elevator accelerates upward at 0.79 m/s2.
To learn more about spring stretches
https://brainly.com/question/28944028
#SPJ1
What is the relation between frequency and velocity formula?
Wave velocity formula: v = f x λ. As frequency increases, velocity increases, while wavelength remains constant.
frequency and velocity are connected with regards to wave spread. The speed of a wave is the distance it goes in a given time, while frequency is the quantity of cycles or motions of a wave that happen in a given time. The connection between recurrence (f), frequency (λ), and speed (v) of a wave is given by the equation v = f x λ, where v is the speed of the wave, f is the recurrence, and λ is the frequency. This really intends that as the recurrence of a wave expands, its speed likewise increments, while keeping the frequency consistent.
In outline, the speed of a wave is connected with its recurrence through the equation v = f x λ. As the recurrence of a wave expands, its speed likewise increments, while the frequency stays steady.
To learn more about frequency and velocity, refer:
https://brainly.com/question/16298323
#SPJ4
In order to find the components of a vector, you should (3)
draw the vector with the correct magnitude and orientation, measure the sides of the rectangle and draw a rectangle so the vector is the diagonal
In order to find the components of a vector, you should draw the vector with correct magnitude and orientation, measure the sides of the rectangle, draw a rectangle so that the vector is diagonal. Option d is correct choice.
To find the components of a vector, you need to know its magnitude and direction. You can draw the vector on a coordinate plane with the correct magnitude and orientation. Then, you can draw a rectangle around the vector so that the vector forms the diagonal of the rectangle. The sides of the rectangle that are parallel to the x and y axes represent the x and y components of the vector, respectively.
Next, you should measure the lengths of these sides using a ruler or scale. The length of the side parallel to the x-axis represents the x-component of the vector, while the length of the side parallel to the y-axis represents the y-component of the vector. It's important to note that the x-component of the vector is the horizontal component, while the y-component is the vertical component. Depending on the orientation of the vector, you may need to rotate the rectangle or use trigonometric functions to find the correct values for the components. Option d is correct.
To know more about the vector, here
brainly.com/question/29740341
#SPJ4
--The complete question is, In order to find the components of a vector, you should
a. draw the vector with correct magnitude and orientation
b. measure the sides of the rectangle
c. draw a rectangle so that the vector is diagonal
d. all of the above--
What is the chest circumference of a newborn?
The average chest circumference of a newborn varies depending on a number of factors such as the gestational age, sex, and size of the baby.
However, a typical range for chest circumference at birth is around 30-36 centimeters (12-14 inches). It's important to note that this is an average range, and individual babies may have chest circumferences that fall outside of this range.
Chest circumference is a measurement that can be used to monitor the growth and development of a newborn, and any concerns about the baby's growth should be discussed with a healthcare provider. Circumference is a measure of the distance around the edge of a circular object, such as a circle or a cylinder. It is the total length of the boundary or perimeter of the object.
The formula to calculate the circumference of a circle is: C = 2πr where C is the circumference, π (pi) is a mathematical constant approximately equal to 3.14159, and r is the radius of the circle (the distance from the center of the circle to any point on its edge).
For example, if a circle has a radius of 5 centimeters, you can calculate its circumference as:
C = 2πr = 2 x 3.14159 x 5 = 31.4159 centimeters
So the circumference of the circle is approximately 31.42 centimeters. The same formula can be used to find the circumference of other circular objects such as cylinders, tubes, or pipes, as long as their shape is circular.
To know more about circumference here
https://brainly.com/question/27447563
#SPJ4
How to convert 10celsius to fahrenheit?
10 °C is equivalent to 50 °F. To convert a temperature from Celsius to Fahrenheit, you multiply the Celsius temperature by 9/5 and add 32.
To convert 10 degrees Celsius (°C) to Fahrenheit (°F), you can use the following formula:
°F = (°C x 9/5) + 32
Plugging in the given value of 10 °C, we get:
°F = (10 x 9/5) + 32 = 18 + 32 = 50 °F
Therefore, 10 °C is equivalent to 50 °F.
The Celsius and Fahrenheit scales are two common temperature scales used in different parts of the world. Celsius (°C) is a metric temperature scale used in most countries around the world, while Fahrenheit (°F) is a temperature scale used primarily in the United States and a few other countries.
The conversion formula between Celsius and Fahrenheit is:
°F = (°C x 9/5) + 32 °C = (°F - 32) x 5/9
To convert a temperature from Celsius to Fahrenheit, you multiply the Celsius temperature by 9/5 and add 32. To convert a temperature from Fahrenheit to Celsius, you subtract 32 from the Fahrenheit temperature and then multiply the result by 5/9.
It's important to note that Celsius and Fahrenheit have different freezing and boiling points. In Celsius, water freezes at 0°C and boils at 100°C, while in Fahrenheit, water freezes at 32°F and boils at 212°F. This means that the same temperature can have different meanings depending on the scale used.
Learn more about conversion here:
https://brainly.com/question/30451535
#SPJ4
A violet line is observed at 434.0 nm in the spectrum of atomic hydrogen. Determine the values of n for the beginning and ending energy levels of the electron during the emission of energy that leads to this spectral line?
The electron transitions from the n=6 energy level to the n=2 energy level during the emission of the photon that produces the violet line at 434.0 nm in the spectrum of atomic hydrogen.
What does an atomic spectrum signify?An atomic spectrum represents the distribution of electromagnetic radiation (light) emitted or absorbed by an atom in a gaseous state. It signifies the energy transitions of electrons within the atom as they move from higher energy levels to lower energy levels or vice versa.
The violet line observed at 434.0 nm in the spectrum of atomic hydrogen corresponds to a photon with a specific energy. We can use the energy-level diagram for hydrogen to determine the initial and final energy levels of the electron during the emission of this photon.
The photon's energy can be calculated using the equation:
E = hc/λ
where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.
Converting the wavelength of the photon to meters, we have:
λ = 434.0 nm = 434.0 × 10⁻⁹ m
Substituting the values of h, c, and λ into the equation, we get:
E = hc/λ = (6.626 × 10⁻³⁴ J s) × (3.00 × 10⁸ m/s) / (434.0 × 10⁻⁹ m) = 4.569 × 10⁻¹⁹ J
This energy corresponds to the difference in energy between the initial and final energy levels of the electron in the hydrogen atom. We can use the Rydberg formula to calculate the initial and final energy levels:
1/λ = R(1/n₁² - 1/n₂²)
where R is the Rydberg constant, n1 is the initial energy level, and n2 is the final energy level.
The Rydberg constant for hydrogen is:
R = 1.097 × 10⁷ m⁻¹
Substituting the values of λ and R into the equation, we get:
1/λ = R(1/n₁² - 1/n₂²)
1/434.0 × 10⁻⁹m = (1.097 × 10⁷ m⁻¹)(1/n₁² - 1/n₂²)
Solving for n1 and n2 gives:
n1 = 2
n2 = 6
To know more about electromagnetic radiation, visit:
https://brainly.com/question/10759891
#SPJ1
What is a simple definition of net force?
Net force is the overall force acting on an object, which takes into account the magnitude and direction of all the individual forces acting on it.
Whenever there are multiple forces acting on an object, the net force determines the resulting motion of the object. If the net force is zero, the object will remain at rest or continue to move with a constant velocity.
If the net force is non-zero, the object will experience acceleration in the direction of the net force, as described by Newton's second law of motion. The net force can be calculated by vector addition of all the individual forces acting on the object.
To know more about the force, here
brainly.com/question/13191643
#SPJ4
an experiment is performed in which a collision occurs between cart x and cart y . data are collected about each cart before and after a collision takes place. which data from the table should the student use to verify the conservation of momentum for each trial, and what is a justification for using those data?
The student should use the data for the initial momentum and the final momentum of both carts to verify the conservation of momentum for each trial. The initial momentum of each cart is the product of its mass and initial velocity, while the final momentum is the product of its mass and final velocity.
How is Law of conservation of momentum used in justifying the data?The justification for using these data is that, according to the law of conservation of momentum, The system's total momentum before and after the collision should be calculated. The result is the same unless no external forces act on the system. In this case, the system consists of the two carts X and Y, and there are no external forces acting on them during the collision. Therefore, the total momentum of the system should be conserved.
To verify the conservation of momentum, the student should add up the initial momentum of cart X and cart Y, which is the sum of the products of their respective masses and initial velocities. Then, the student should add up the final momentum of cart X and cart Y, which is the sum of the products of their respective masses and final velocities. If the total momentum before the collision is equal to the total momentum after the collision, then momentum is conserved.
To know more about external forces, visit:
https://brainly.com/question/16186958
#SPJ1
what is gaussian beam rayleigh range derivation?
The Rayleigh length and Rayleigh range [tex]Z_{R}[/tex] are calculated: Here is the light's λ wavelength, and n is really the refraction index. This same width w of the beam is 1.414 larger at a distance from the waist equitable.
To the Rayleigh range [tex]Z_{R}[/tex] that it is at the focus in W = [tex]W_{0}[/tex] which, this same beam waist. A laser beam's Rayleigh length (and otherwise Rayleigh range) is the distance out from the beam waist (within the propagation path) where the wave radius is elevated by the squared of 2.
This means that the toggle area of a circular beam is doubled at this point. The Rayleigh beam concept takes into account rotational inertia effects that the Euler-Bernoulli beam theory does not.
As a result, the model is applied to a greater range of regimes. Waves in well before Rayleigh beams on elastomer fundaments are given special consideration.
learn more about Rayleigh here:
https://brainly.com/question/28334185?referrer=searchResults
#SPJ4
What is freezing point depression and give example an application?
Freezing point depression is a phenomenon in which the freezing point of a liquid is lowered when a solute is added to it. An example application of freezing point depression is in the use of antifreeze solutions.
At Freezing point depression, the solution will freeze at a lower temperature than the pure solvent would. This effect occurs because the solute molecules disrupt the regular crystal structure of the solvent as it tries to solidify, making it harder for the solvent to freeze.
Antifreeze is typically a mixture of water and ethylene glycol, which is added to the radiator of a vehicle to prevent the water in the engine from freezing in cold temperatures. By lowering the freezing point of the water, antifreeze allows the engine to operate safely in cold climates without the risk of the coolant freezing and causing damage to the engine.
To know more about the freezing point depression, here
brainly.com/question/30389524
#SPJ4
what is microliter to ml?
One microliter (µL) is equal to 0.001 milliliters (mL).
Both microliter and milliliter are units of volume used in the metric system. Microliter is a smaller unit and is equal to one millionth (10^-6) of a liter, while milliliter is a larger unit and is equal to one thousandth (0.001) of a liter.
Therefore, to convert the unit of measurements from microliters to milliliters, we divide the value in microliters by 1000 (or multiply the number by 0.001). For example, 500 microliters is equal to 0.5 milliliters (500/1000 = 0.5).
To know more about the microliter, here
brainly.com/question/13809805
#SPJ4
What is value of Stefan-Boltzmann constant?
The required value of Stefan-Boltzmann Constant is 5.67 × 10⁻⁸ W.m⁻².K⁻⁴ or 5.67 × 10⁻⁵ erg.cm².s.K⁴.
Stefan's constant, also referred to as the Stefan-Boltzmann Constant, is a fundamental constant used in physics. It is the ratio constant in the Stefan-Boltzmann equation for Blackbody radiation. The Greek symbol σ stands for the Stefan Boltzmann Constant. The value of the Stefan Boltzmann constant can be calculated or discovered empirically.
The SI values for the Stefan Boltzmann constant's value are as follows:
Stefan Boltzmann Constant σ = 5.67 × 10⁻⁸ W.m⁻².K⁻⁴
It can also be stated using different units. Stefan-Boltzmann Constant in the CGS unit is 5.67 × 10⁻⁵ erg.cm².s.K⁴.
To know more about Stefan-Boltzmann constant:
https://brainly.com/question/30434722
#SPJ4
State the name of the energy
store that has more energy at the end than it had at the start
The name of the energy store that has more energy at the end than it had at the start is kinetic energy.
What is kinetic energy?Kinetic energy is the energy possessed by an object due to its motion. The amount of kinetic energy possessed by an object depends on its mass and velocity. When an object is accelerated from rest, work is done on it, and its kinetic energy increases from zero to a certain value.
Similarly, when an object is subjected to a force that changes its speed or direction of motion, its kinetic energy changes. Therefore, the kinetic energy store can have more energy at the end than it had at the start, depending on the changes in an object's speed or velocity.
More on kinetic energy can be found here: https://brainly.com/question/26472013
#SPJ1
What is definition of surface tension
Surface tension is defined as the force per unit length required to break the surface film of a liquid and is commonly measured in units of Newtons per meter (N/m).
The molecules of a liquid are held together by attractive forces known as intermolecular forces. At the surface of the liquid, the molecules are subjected to unbalanced intermolecular forces that pull them inward, causing the surface to behave as if it were under tension.
This tension is what causes liquid surfaces to form into a distinct shape, such as a droplet, and to resist external forces that try to deform or break the surface. Surface tension is a physical property of a liquid that arises from the cohesive forces between the molecules at the surface of the liquid.
The magnitude of the surface tension depends on the nature of the liquid and the surrounding environment, such as temperature and pressure. It can also be affected by the presence of impurities or surfactants, which can alter the intermolecular forces at the surface.
Surface tension has important practical applications, such as in the formation of bubbles and the behavior of fluids in capillary tubes. It is also a key factor in the wetting and spreading of liquids on surfaces, as well as in the formation of emulsions and foams.
To know more about surface tension here
https://brainly.com/question/11348644
#SPJ4
how many grams is a ml
Answer:
1 gram
Explanation:
hope this helps
the tendency of an object to resist change is calleda. massb. inertiac. forced. balance
how to convert lbf to n
To convert pounds-force (lbf) to newtons (N), you can use the conversion factor: 1 lbf = 4.4482 N
LBF stands for "pounds-force," which is a unit of force commonly used in the United States and other countries that still use the Imperial system of units.
A pound-force is defined as the force required to accelerate a mass of one pound at a rate of 32.174 feet per second squared (ft/s²) in a gravitational field. This means that the weight of an object in pounds can be converted to pounds-force by multiplying it by 32.174 ft/s², which is the acceleration due to gravity at the Earth's surface.
The pound-force is related to the metric unit of force, the newton (N), through the conversion factor of 1 pound-force = 4.4482 newtons. This means that one pound-force is equivalent to 4.4482 newtons of force.
This means that one pound-force is equivalent to 4.4482 newtons of force. To convert from pounds-force to newtons, multiply the value in pounds-force by the conversion factor of 4.4482. For example, to convert 10 pounds-force to newtons:
10 lbf = 10 x 4.4482 N
10 lbf = 44.482 N
To know more about pounds here
https://brainly.com/question/29719951
#SPJ4
Assuming the mass of the moon is 7.4 * 10 ^ 12 kg and its radius is 1.7 * 10 ^ 6 * m what is the gravitational energy of 1 kg mass at the moon's surface, Assuming R = 6.4 * 10 ^ 6 m. M- 6 * 10 ^ 24 kg. g = 9.8m / (s ^ 2) G = 6.7 * 10 ^ - 11
Answer:
1.620 m/s^2
Explanation:
The acceleration due to gravity on the surface of the moon can be calculated using the formula:
g = G * M / R^2
where g is the acceleration due to gravity, G is the gravitational constant, M is the mass of the moon, and R is the radius of the moon.
Substituting the given values, we get:
g = (6.67 × 10^-11 Nm^2/kg^2) * (7.4 × 10^22 kg) / (17.4 × 10^6 m)^2
g = 1.62 m/s^2
Therefore, the acceleration due to gravity on the moon is approximately 1.62 m/s^2.
what is unit for impulse?
An impulse is a sudden force that affects an object for a brief period of time. It is a vector quantity and Newton-seconds (Ns), or kg/m/s, is the unit of impulse in the SI system.
A measurement that describes the impact of a force acting on an item for a specific amount of time is known as a "impulse." Given that it has both a magnitude and a direction, it is a vector quantity. The letter "J" is used to denote it. The force operating on the object and the length of time it is acting are multiplied to create the impulse in mathematics.
Hence, it can be expressed as J=F.t. An object experiences an impulse, which causes a change in the vector's linear momentum in the same direction. Newton Second is the S.I. unit of impulse, and it is denoted by the symbol (N-s). The impulse momentum theorem states that an object's change in momentum is equal to the impulse applied on it.
learn more about Impulse here:
https://brainly.com/question/904448
#SPJ4
Hree cars, car X, car Y, and car Z, begin accelerating from rest at the same time. Car X is more massive than car Y, which is more massive than car Z. The net accelerating force exerted on each car is identical. After 10 seconds, which car has the most amount of momentum
Since all three cars have the same final velocity, the one with the greatest mass, which is car X, will have the most amount of momentum after 10 seconds.
The amount of momentum each car has after 10 seconds will depend on both its mass and its velocity. Since all three cars experience the same net accelerating force, they will all have the same acceleration. However, because car X is more massive than car Y, which is more massive than car Z, it will take more force to accelerate car X to the same acceleration as car Y and car Z.
Therefore, after 10 seconds, all three cars will have the same final velocity (assuming they all started from rest), but car X will have a greater amount of momentum than car Y and car Z because of its greater mass.
The formula for momentum is:
momentum = mass x velocity. Since all three cars have the same final velocity, the one with the greatest mass, which is car X, will have the most amount of momentum after 10 seconds.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ4
What is frequency of a wave in physics?
Frequency is the number of wave cycles per second, measured in hertz (Hz), and related to wavelength and velocity.
In material science, recurrence is a proportion of the quantity of cycles or motions of a wave that happen in a given time. It is generally addressed by the image f and is estimated in hertz (Hz), which addresses the quantity of cycles each second. The recurrence of a wave is connected with its frequency and speed, where the frequency is the distance between progressive pinnacles of the wave, and speed is the speed at which the wave voyages. The higher the recurrence of a wave, the more cycles or motions it has per unit of time, and the more limited its frequency. Recurrence is a key idea in numerous areas of material science, including electromagnetism, optics, and acoustics.
In rundown, recurrence is a proportion of the quantity of cycles or motions of a wave that happen in a given time. It is generally addressed by the image f and estimated in hertz (Hz). The recurrence of a wave is connected with its frequency and speed, and is an essential idea in numerous areas of material science.
To learn more about frequency of a wave, refer:
https://brainly.com/question/27245817
#SPJ4
A plane accelerates from rest at a constant rate of 5.00ms2along a runway that is 1800mlong. Assume that the plane reaches the required takeoff velocity at the end of the runway. What is the time tTOneeded to take off?
The time plane needs to take off is 12 sec if the plane accelerates from rest at a constant rate of 5.00ms² along a runway that is 1800m long.
We can use the kinematic equation that relates the final velocity, initial velocity, acceleration, and time to solve this problem:
[tex]v_f[/tex] = [tex]v_i[/tex] + at
where:
[tex]v_f[/tex] = final velocity of the plane (takeoff velocity)
[tex]v_i[/tex] = initial velocity of the plane (0 m/s)
a = acceleration of the plane (5.00 m/s²)
t = time needed to take off
We also know that the plane takes off when it reaches the end of the runway, so we can use another kinematic equation that relates the distance, initial velocity, acceleration, and time:
d = [tex]v_i[/tex]t + 0.5a × t²
where:
d = distance traveled by plane (1800 m)
We can solve the first equation for t:
t = ([tex]v_f[/tex] - [tex]v_i[/tex]) / a
Since the initial velocity is 0 m/s, this simplifies to:
t = [tex]v_f[/tex] / a
Substituting this expression for t into the second equation, we get:
d = 0.5a([tex]v_f[/tex]/a)²
Simplifying this expression:
d = 0.5 × [tex]v_f[/tex]² / a
Multiplying both sides by 2/a:
d × 2/a = [tex]v_f[/tex]² / a
Taking the square root of both sides:
[tex]v_f[/tex] = √(2ad)
Now we can substitute the values we know and solve for [tex]v_f[/tex]:
[tex]v_f[/tex] = √(2 × 5.00 m/s² × 1800 m) = 60.0 m/s
Finally, we can use the first kinematic equation to solve for t:
t = [tex]v_f[/tex] / a = 60.0 m/s / 5.00 m/s² = 12.0 s
Therefore, it will take the plane 12.0 seconds to take off.
Learn more about plane acceleration at
https://brainly.com/question/27931823
#SPJ4
what would happen if the electrical signals radiated out from the av node rather than being routed to the apex of the heart?
None of the above are correct. If the electrical signals radiated out from the AV node rather than being routed to the apex of the heart, the heart's normal rhythmic function would be disrupted.
This is because the AV node is responsible for controlling the rate and pattern of electrical impulses that travel through the heart. By diverting the electrical signal away from the apex of the heart, the normal pattern of contraction and relaxation of the atria and ventricles would be disrupted. The disruption of this pattern would lead to an irregular heartbeat, which can cause symptoms such as palpitations, lightheadedness, and fatigue. Additionally, neuronal regulation of heart rate would be impaired since the electrical signals are not routed to the apex of the heart as normal.
learn more about electrical signal Refer:brainly.com/question/29333541
#SPJ4
complete question:What would happen if the electrical signals radiated out from the AV node rather than being routed to the apex of the heart?
The atria and ventricles would contract at the same time.
The ventricles would start squeezing from the top to the bottom.
The AV node and the SA node would be unable to communicate.
Neuronal regulation of heart rate would be impaired .
None of the above are correct.
Rank the following capacitors on the basis of the dielectric constant of the material between the plates. Rank from largest to smallest. To rank items as equivalent, overlap them. A = 4 cm^2 C = 2 nF A = 2 cm^2 C = 4 nF A = 8 cm^2 C = 2 nF A = 2 cm^2 C = 8 nF A = 1 cm^2 C = 1 nF A = 4 cm^2 C = 1 nF
On the basis of the dielectric constant of the material between the plates : A=2cm² C=8nF >A=2cm² C=4nF > A=1cm² C=1nF >A=4cm² C=2nF > A=4cm² C=1nF = A=8cm² C=2nF.
What is meant by dielectric constant ?The ratio of the electric permeability of material to the electric permeability of free space is called as dielectric constant (ϵr) and its value can be derived from a simplified capacitor model.
Dielectric constant of a substance is a measure of its ability to store the electrical energy and it is an expression of the extent to which material concentrates electric flux. Mathematically, dielectric constant can be said as the ratio of a material's permittivity to permittivity of free space.
To know more about dielectric strength, refer
https://brainly.com/question/15083679
#SPJ1
the sum of a systems potential and kinetic energy is equal to what?
a. Mechanical energy
b. Muscular energy
c. Solar energy
d. Wind energy
The sum of the potential and kinetic energy of the systems is equal to the option a. mechanical energy of the system.
Mechanical energy in physics is the sum of kinetic energy and potential energy. According to the law of conservation of mechanical energy, when only conservative forces act in an isolated system, the mechanical energy remains constant. Potential energy increases when an object moves in the direction opposite to the conservative force. Kinetic energy also changes when the speed (not the speed) of an object changes. Although non-conservative forces, such as friction, will always exist in real systems, if they are small the mechanical energy changes very little, making the idea of its conservation a useful approximation.
Kinetic energy is conserved in elastic collisions, but some mechanical energy can be converted to heat in inelastic collisions.
To know more about mechanical energy, visit,
https://brainly.com/question/1511302#:~:text=Expert%2DVerified%20Answer&text=Mechanical%20energy%20of%20an%20object,of%20both%20type%20of%20energies.
#SPJ4
The diagram below shows the orbit of a satellite around the Sun.
At which point does the satellite have the least gravitational potential energy?
A. Point C
B. Point A
C. Point B
D. Point D
Answer:
Explanation:
5. When a particular string is vibrated at a frequency of 10 Hz, a transverse wave of wavelength 0,25m is produced. Determine the speed of the wave as it travels along the string.
The speed of the wave as it travels along the string is 2.5 m/s.
What is transverse wave?In transverse waves, the oscillations area perpendicular to the direction of the movement of the wave.
Given is that when a particular string is vibrated at a frequency of 10 Hz, a transverse wave of wavelength 0.25m is produced.
We can write the speed of the transverse wave as -
v = frequency x wavelength
v = fλ
v = 10 x 0.25
v = 10 x 25/100
v = 2.5 m/s
Therefore, the speed of the wave as it travels along the string is 2.5 m/s.
To solve more questions on transverse waves, visit the link below -
https://brainly.in/question/165568
#SPJ9
what is power voltage formula
The formula for electrical power in terms of voltage is: Power (P) = Voltage (V) x Current (I).
This is also known as Joule's Law, which states that the power (in watts) dissipated by an electrical circuit is equal to the voltage (in volts) across the circuit multiplied by the current (in amperes) flowing through the circuit.
This formula can be rearranged to solve for voltage or current, depending on which quantity is known:
To find voltage: V = P / I
To find current: I = P / V
It is important to note that this formula assumes a direct current (DC) circuit, in which the voltage and current are constant. In an alternating current (AC) circuit, the relationship between voltage, current, and power is more complex and involves additional factors such as the frequency and phase of the AC signal.
To know more about power here
https://brainly.com/question/2248465
#SPJ4
why could the measured values obtained by other students be different from yours
The measured values obtained by other students can be different from the values taken by us because of the errors during the experiment.
When we perform any experiment we have to take care of two things and they are Precision and accuracy.
Precision means that how much the values are wearing from each other and accuracy means that how much the value is near to the actual value.
Sometimes while performing experiments measured by the other students can be different from the value taken by us because of the human error for the error in the instrument or any other factor interfering during the experiment performance.
To know more about accuracy and precision, visit,
https://brainly.com/question/1695072#:~:text=Expert%2DVerified%20Answer&text=Accuracy%20means%20how%20close%20the,is%20consistency%20of%20the%20result.
#SPJ4
combining glass, a filament, and metal base (all of which previously existed) to form a new tool called the light bulb is an example of .
Answer:
Combining glass, a filament, and metal base to form the light bulb is an example of innovation. Innovation is the process of combining existing elements in new and novel ways to create something original.