what is 48 farenheit in celcius?

We can use the formula for gravitational acceleration:

a = G * M / r^2

where G is the gravitational constant, M is the mass of the sun, and r is the radius of the sun. Plugging in the values, we get:

a = (6.67 x 10^-11 N m^2/kg^2) * (2.0 x 10^30 kg) / (7.0 x 10^8 m)^2

a = 274 m/s^2

So the acceleration due to gravity on the surface of the sun is about 274 m/s^2.

The initial velocity of the ball will be 27.44 m/s after being struck by the bat.

Given, We have a ball which is travelling in a straight path upward. The only force which are acting on the ball is Gravitational force due to Earth. We already know the time taken by the ball and the acceleration in this case, so we will use " v = u + at " . The acceleration due to gravity will be 9.8 m/s², Where v =  final velocity, U = initial velocity, a = acceleration and t = time taken by the object. (We will consider going upward as positive direction and downward as negative direction).We know that Final velocity will be 0 at maximum height.

Now, putting the values :
⇒  v = u + a x t

⇒ 0  = u + (-9.8 m/s²) x 2.80 s

⇒ -u = -27.44 m/s

∴ u = 27.44 m/s

Therefore, the initial velocity of the ball after being struck by the bat will be 27.44 meters/second.

Learn more about Kinematics here,

https://brainly.com/question/29153562

#SPJ4

A rock climber moves 2 m to her right and then climbs 4 m up the side of a cliff.

The correct answer is 63.4

tan-1 = 4/2

= 63.4

What is a cliff?

To know more about cliffs, click the link given below:

https://brainly.com/question/29065952

#SPJ1

When the net force of opposite forces is zero, the forces are balanced. Hence the correct option is (c).

A net force is the sum of all forces acting on an object, taking into account their magnitudes and directions. If the net force acting on an object is zero, then the object will remain in its current state of motion (either at rest or moving with a constant velocity). This is known as the principle of inertia. When two forces of equal magnitude but opposite direction act on an object, they are said to be balanced forces. The forces cancel each other out, resulting in a net force of zero. In this case, the object will not accelerate in any direction and will remain in its state of motion. Therefore, when the net force of opposite forces is zero, the forces are balanced. This means that the forces are equal in magnitude and opposite in direction, and they cancel each other out. It is important to note that balanced forces do not necessarily mean that the forces are not equal; rather, it means that their effects on the object are equal and opposite.

To know more about force please refer: https://brainly.com/question/30504406

#SPJ4

The magnitude of vector c is sqrt([tex]4x^2 + 49y^2[/tex]) using Pythagorean theorem

To find the magnitude of the vector c = a + b, we can use the Pythagorean theorem in two dimensions, which states that the magnitude of a two-dimensional vector (a, b) is given by:

[tex]|c| = sqrt(a^2 + b^2)[/tex]

where a and b are the horizontal and vertical components of the vector c.

First, we need to find the components of the vector a and b:

a = 4x + 5y

b = -2x + 2y

Add these vectors gives:

[tex]c = a + b = (4x + 5y) + (-2x + 2y) = 2x + 7y[/tex]

Now we can find the magnitude of vector c using the Pythagorean theorem:

[tex]|c| = sqrt((2x)^2 + (7y)^2) = sqrt(4x^2 + 49y^2)[/tex]

Therefore, the magnitude of the vector c is sqrt([tex]4x^2 + 49y^2).[/tex]

Learn more about vectors here:

https://brainly.com/question/11313073

#SPJ4

"Region surrounding the nucleus where electrons are found is called as atomic orbital."

The electrons are readily accessible in the area around the core known as the orbital district and are actively involved in generating synthetic responses.

The smallest unit of conventional matter with substance-like properties is a molecule, which is most essential.

Protons and neutrons, which are necessary for the core of all molecules, and electrons, which revolve around them, are the subatomic elements that make up molecules. Electrons are negatively charged, neutrally charged nuclei, and strongly charged protons.

Each molecule is made up of an energy level where electrons are located and a centre where neutrons and protons collide.

This is because protons and neutrons make up the nuclear core of the particle, which is the main component, while electrons are found in the orbitals or fringe area.

To know more about electrons:

https://brainly.com/question/19468991

#SPJ4

As block y has more mass than block x, it will experience a more significant force due to gravity and accelerate downwards faster than block x. As block y moves downwards and block x moves upwards, the total kinetic energy of the system increases while the gravitational potential energy decreases. However, the total mechanical energy remains constant throughout the motion.

The mechanical energy of a system will remain constant when no non-conservative forces are acting on it, such as friction or air resistance. In other words, if the only forces working on the system are conservative forces, such as gravity or elastic forces, then the system's mechanical energy will be conserved.

The law of conservation of mechanical energy states that a system's total mechanical energy, which includes kinetic energy and potential energy, remains constant as long as only conservative forces act on the system. This means that the system's total energy cannot be created or destroyed but can only be transferred from one form to another.

To learn more about friction, visit here:

https://brainly.com/question/28356847

#SPJ1

The answer to their questions are, 1) he gains momentum in the opposite direction. 2) he gains momentum in the same direction as the ball motion 3) until they are so far from each other.

1. Suppose the students always throw the ball with the same horizontal component of velocity. Each time a student throws the ball to his friend, he gains momentum in the opposite direction.

2. Also, each time a student catches the ball, he gains momentum in the same direction as the ball motion.

3. So the students will throw a ball until they are so far from each other.

When one student throws the ball to his friend, he gains an equal and opposite amount of momentum to the momentum of the ball in the horizontal direction. When the other student catches the ball, he also gains momentum in the same direction as the ball motion. This results in both students moving away from each other with each throw and catch until they become too far apart to continue playing catch. The students will continue throwing the ball back and forth until they reach a certain distance apart, at which point they will stop playing.

To learn more about momentum Click here:

brainly.com/question/30677308

#SPJ4

The mechanism that causes the air to rise and cool on the windward side of the mountain range is convection, which plays a significant part in creating the rain shadow effect.

For more information on convection kindly visit to

https://brainly.com/question/30789977

#SPJ1

Statement A and C are related to Doppler Effect while Statement B and D are not, which explains why it detects only radial velocity.

Statement A:

This statement is correct. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source. The amount of shift in wavelength or frequency is determined by the relative velocity of the source and the observer along the line of sight. If the source is moving perpendicular to the line of sight, then there will be no change in the wavelength or frequency of the wave.

Statement B:

This statement is not directly related to the Doppler effect. The temperature of an object is related to the average kinetic energy of its particles, which can affect the amount and frequency of radiation emitted by the object. However, this does not affect the Doppler effect, which is solely related to the relative motion of the wave source and observer.

Statement C:

This statement is also correct. If the observer is moving away from the wave source, the effective wavelength of the wave will be longer, leading to a decrease in frequency. This is because the peaks of successive waves will be further apart due to the motion of the source away from the observer.

Statement D: about Coulomb force

This statement is not related to the Doppler effect. It describes the relationship between the distance between oppositely charged particles and the strength of the attractive force between them, which is relevant to topics such as atomic and molecular structure.

Learn more about Doppler Effect here:

https://brainly.com/question/1330077

#SPJ4

The astronaut is 4230 km away from the earth surface. On earth surface the gravity is 9.8 m/s². Then, the gravity at the given distance is 3.54 m/s². Then the weight of the person at this altitude is 291 N.

Gravitational force is the force by which earth attracts every objects into its center and that's why we are all standing on the ground. We feel a weight in earth due this gravity.

The gravity on earth surface is 9.8 m/s². It is inversely proportional to the square of the distance from earth.

The distance r for the astronaut from earth's center of gravity = 4230 + 6380 km = 10610 km

then, 9.8 m/s²/g(new) = (10610 km)²/(6380)²

then g(new) = 3.54 m/s².

Now, weight of the person = mg = 82 kg × 3.54 m/s² = 291 N.

Therefore, the weight of the astronaut at the given distance from earth will be 291 N.

Find more on gravitational force:

https://brainly.com/question/29190673

#SPJ1

"If the temperature outside increased 10 degrees Celsius, the relative humidity value will decrease but the dew point will not change. This is because, the dew point is not dependent on temperature."

The ratio of actual water vapour to the maximum quantity of water vapour that the air can hold is known as relative humidity. The total quantity of water vapour that the air is capable of holding depends on its temperature. Since the air can hold drops if the total quantity of water vapour is chilled, the relative humidity increases.

The ratio of the actual water vapour to the maximum quantity of water vapour that the air can hold is relative humidity, which is dependent on temperature. The overall amount of water vapour is affected by the air's temperature. The temperature that the atmosphere would need to be lowered to in order to become saturated is known as the dew point. When moisture levels are high, the dew point temperature is just a few degrees below or at the same level as air temperature. It is unaffected by changes in air temperature and does not fluctuate significantly throughout the day.

To know more about humidity:

https://brainly.com/question/29769017

#SPJ4

The capture theory contends that the Moon was once an errant body (similar to an asteroid) that formed somewhere else in the solar system and was drawn in by the gravity of Earth as it passed close by.

The Moon, on the other hand, was generated alongside Earth during its formation, according to the accretion theory.The theory behind fusion: According to this idea, the Moon was once a component of the Earth and somehow became apart from it early in the development of the solar system. The current Pacific Ocean basin is the most well-liked location for the region of Earth from which the Moon originated. The huge impact hypothesis, which is the most widely accepted idea and is backed by the scientific community, contends that the moon formed when something slammed into the early Earth. comparable to other worlds.The Fission Theory: According to this idea, the Moon was originally a part of the Earth and was somehow split apart from the planet early in the solar system's history. The current Pacific Ocean basin is the most well-liked location for the region of Earth from which the Moon originated.

Learn more about gravity here:

https://brainly.com/question/14874038

#SPJ4

The distance from crest to crest or from trough to trough of a wave is called the wavelength.

A wavelength is the distance between two consecutive points on a wave that are in phase with each other, such as two adjacent crests or two adjacent troughs. In other words, it is the distance between any two points on a wave that are at the same point in their cycle of motion.

Wavelength is an important characteristic of any wave, including electromagnetic waves (such as light and radio waves), sound waves, and water waves. It is usually denoted by the Greek letter lambda (λ) and is expressed in units of length, such as meters (m), centimeters (cm), or nanometers (nm).

Learn about wavelength here https://brainly.com/question/10728818

#SPJ1

Answer:

p = m v       momentum p is usually considered a vector quantity

Since the vector velocity v is positive in one case and negative in the other case (where v is the scalar speed), the momentum is different (opposite and equal) in the two cases given.

Option C) power factor correction is correct, where capacitor does work by storing and releasing energy to improve AC circuits power factor.

A capacitor is a device used in electrical circuits to store and release electrical energy. It is an essential component in many electrical systems and can perform various functions, including producing large current pulses, timing circuits, and power factor correction.

Option (c) Power factor correction is a job that a capacitor can perform in electrical work. In AC circuits, the power factor is the ratio of the real power (in watts) to the apparent power (in volt-amperes), and it measures the efficiency of power utilization in the circuit. When the power factor is less than unity, it means that the circuit is less efficient and is wasting energy.

Capacitors can be used to correct the power factor in AC circuits by storing and releasing energy to offset the reactive power, which results from the lag between the voltage and current waveforms. By doing so, the power factor can be increased to unity, making the circuit more efficient and reducing energy waste. Capacitors used for power factor correction are called power factor correction capacitors, and they are widely used in industries, power plants, and large commercial buildings to improve the power factor of electrical systems.

Learn more about work here:

https://brainly.com/question/29266754

#SPJ4

To convert watts to joules, we can use Formula: Energy (joules) = Power (watts) x Time (seconds)

Watts and joules are both units of energy, but they measure different things. Watts are a unit of power, which is the rate at which energy is transferred or used, while joules are a unit of energy itself. To convert watts to joules, you need to know the time over which the power is being used.

The formula for converting watts to joules is:

Energy (joules) = Power (watts) x Time (seconds)

For example, if you have a 100-watt light bulb that is turned on for 5 seconds, the amount of energy used by the light bulb can be calculated as:

Energy (joules) = 100 watts x 5 seconds = 500 joules

In other words, the light bulb used 500 joules of energy during the 5 seconds it was turned on.

Learn more about watts here:

https://brainly.com/question/29034284

#SPJ4

The tension in the cable is equal to the gravitational force on the elevator.

When an elevator is moving upward at a constant speed, it means that its acceleration is zero. According to Newton's second law of motion, the net force acting on an object is equal to its mass times its acceleration. Since the acceleration is zero, the net force on the elevator must be zero.

In this scenario, there are only two forces acting on the elevator: its weight (which is equal to the gravitational force acting on it) and the tension in the cable. The tension in the cable is upward, while the weight is downward. Therefore, for the net force to be zero, the tension in the cable must be equal in magnitude to the weight of the elevator.

Therefore, the tension in the cable is equal to the gravitational force on the elevator.

Learn more about tension of elevator here: https://brainly.com/question/4289588

#SPJ1

On an ECG machine that meets the international standard, the paper moves at 25 mm/s.

for such more question on ECG

https://brainly.com/question/12593339

#SPJ4

The radius of a spherical wave is the distance between the center of the wave source and the wavefront.

A spherical wave is a type of wave that radiates outwards from a single point source, such as a light bulb or a sound source, and expands in all directions in the form of concentric spheres.The radius of the spherical wavefront is defined as the distance between the wave source and any point on the wavefront. It is the same in all directions, since the wave expands in a symmetrical manner.

The radius of a spherical wave can be calculated using the following formula: r = √(D^2 + d^2) where r is the radius of the wavefront, D is the distance between the wave source and a reference point, and d is the distance between the reference point and a point on the wavefront.The radius of a spherical wave is an important concept in the study of wave propagation and diffraction, and is used in many areas of physics, such as optics, acoustics, and electromagnetism.

This formula is based on the Pythagorean theorem, which states that in a right triangle, the square of the hypotenuse (in this case, the radius of the wavefront) is equal to the sum of the squares of the other two sides (the distances D and d).

To know more about wavefront here

https://brainly.com/question/28879561

#SPJ4

The equivalent resultant force is Fr = 122i - 183k by using principle of moments

To find the equivalent resultant force and couple moment at point O, we can use the principle of moments.

First, we need to find the vector sum of the two wrench forces acting on the pipe assembly. Let's call these forces F1 and F2.

F1 = 120 N at point A, with a direction of 30 degrees from the x-axis

F2 = 200 N at point B, with a direction of 60 degrees from the x-axis

To find the vector sum of these forces, we can use the vector addition formula:

F = F1 + F2

F = [tex](120 cos 30i + 120 sin 30j + 0k) + (200 cos 60i + 200 sin 60j + 0k)[/tex]

F = (60i + 160j + 0k) + (100i + 173.2j + 0k)

F = 160i + 333.2j + 0k

Next, we need to find the point of application of this resultant force. To do this, we can use the formula:

r = (ΣMi x Fi) / ΣFi

where r is the position vector of the point of application, ΣMi is the sum of the moments of the forces about point O, and ΣFi is the sum of the forces.

Let's choose point O as our reference point for the moments. Then,

ΣMi = [tex](rA - rO) * F1 + (rB - rO) * F2[/tex]

where rA and rB are the position vectors of points A and B relative to point O.

rA = -3i + 4j + 0k

rB = 5i + 4j + 0k

ΣMi = [tex](-3i + 4j + 0k) * (120 cos 30i + 120 sin 30j + 0k) + (5i + 4j + 0k) * (200 cos 60i + 200 sin 60j + 0k)[/tex]

ΣMi = (-36k) + (80i - 120k)

ΣMi = 80i - 156k

ΣFi = 160i + 333.2j + 0k

Now we can use the formula for r:

r = (ΣMi x Fi) / ΣFi

r = [tex]((80i - 156k) * (160i + 333.2j + 0k)) / (160i + 333.2j + 0k)[/tex]

r = [tex](80i * 160i + 80i * 333.2j - 156k * 160i - 156k * 333.2j) / (160i + 333.2j)[/tex]

r = (12.72i + 5.64j - 9.6k)

Therefore, the point of application of the resultant force is at (12.72i + 5.64j - 9.6k).

Finally, we can find the couple moment by taking the cross product of the position vector r and the force vector F:

Mro = r x F

Mro = [tex](12.72i + 5.64j - 9.6k) * (160i + 333.2j + 0k)[/tex]

Mro = 122i - 183k

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

"The electromagnetic waves can travel through empty space as they do not require any medium to travel."

Non-mechanical waves include electromagnetic waves. From the disturbance's cause, electromagnetic waves spread in all directions.

As they do not require molecules to move, electromagnetic waves differ from sound waves in this regard. This implies that electromagnetic waves can move through solid things, such as air, as well as through space. Astronauts on spacewalks use radios in this manner to converse.

Different frequencies are available for electromagnetic radiation. A wave's character is determined by its frequency. Radio waves, for instance, are electromagnetic waves with a frequency of 300-30 gigahertz.

Electromagnetic waves can therefore pass through empty space.

To know more about waves:

https://brainly.com/question/16515517

#SPJ4

Answer

As per Columbo's law force is inversely proportional to square of distance between two charges.

[tex]\frac{F}{F_{new}} =\frac{r_{new}^{2} }{r^{2} }[/tex]

[tex]\frac{F}{F_{new}} =\frac{(2r)^{2} }{r^{2} } \\[/tex]

[tex]F = 4 F_{new}[/tex]

therefore the new force if 1/4 times the old one

Marissa knows that this thermometer most likely just read the temperature of A pot of boiling water.

c. A pot of boiling water.

Water boils at 100°C (at sea level and standard atmospheric pressure), so a thermometer that has been heated to 100°C is most likely measuring the temperature of boiling water. Therefore, the correct answer is (c) a pot of boiling water.

A system that is open to its surroundings can trade both matter and energy. A pot of boiling water is an example of an open system since a burner generates heat and loses substance in the form of water vapour when the water boils. A closed system can exchange energy with its surroundings but not matter.

for such more question on thermometer

https://brainly.com/question/29503787

#SPJ4

The freezing temperature in Celsius is 0 degrees Celsius (°C).

Freezing temperature is the temperature at which a liquid transitions to a solid state. The value of the freezing temperature depends on the chemical composition of the liquid, as well as the surrounding pressure and other factors.

For pure water, the freezing temperature in Celsius is 0°C (32°F) at standard atmospheric pressure. This means that when the temperature of liquid water drops to 0°C, it will begin to freeze and solidify into ice. However, if other substances are added to the water, such as salt or sugar, the freezing temperature will be lowered due to the phenomenon of freezing point depression.

To know more about freezing point, here

brainly.com/question/30168966

#SPJ4

--The complete question is, Freezing temperature in celsius is ______.--

A change in wind direction will not have a significant effect on maintaining a 3° glide slope at a constant true airspeed, but it may require some minor adjustments in heading or pitch to compensate for any deviations caused by the wind.

A change in wind direction will have an effect on maintaining a 3° glide slope at a constant true airspeed. The glide slope is determined by the vertical and horizontal components of the aircraft's velocity. If there is a crosswind, it will cause the aircraft to drift off course, which could lead to a deviation from the desired glide slope. The pilot will have to adjust the aircraft's heading to compensate for the crosswind and maintain the desired glide slope.

To know more about the wind direction, here

brainly.com/question/12005342

#SPJ4

Most items  very many charged particles. But even so, don't most objects display static electricity because they are electrically neutral because there are an equal number of positive and negative charges present

Static electricity is a frequent electric phenomenon that happens when charged particles are transferred from one body to another. When two objects are rubbed together, for example, an attracting force is created, especially if the two objects are insulators and the surrounding air is dry. Positively charged objects lose electrons, whereas negatively charged objects acquire electrons.

Charges come in just two flavors: positive and negative. Like charges repel one another, while unlike charges attract. As the cube of the distance increases, the force between the charges weakens.

                                1 e = 1.6 x 10^-19 C

Learn more about Static electricity here

https://brainly.com/question/29526715

#SPJ4

Option A, The magnitude of the net force acting on the object is more than 20 N.

We can find the magnitude of the net force following up on the item by utilizing the Pythagorean hypothesis.

The north force and then the east force are opposite to one another, so they can be treated as the different sides of a right triangle, and the net force is the hypotenuse.

Utilizing the Pythagorean hypothesis:

net force² = (toward the north force)² + (toward the east force)²

net force² = 10² + 10²

net force² = 200

Taking the square base of the two sides:

net force = √(200) = 14.14 N

Subsequently, the extent of the net force following up on the item is more prominent than 20 N (choice A).

Learn more about force at

https://brainly.com/question/13191643

#SPJ4

The correct option is True. The amount of energy used to heat a home can be measured using Kilowatt hours.

In physics, energy is a property of objects or systems that enables them to do work. It is a scalar quantity that can be defined as the ability to do work, where work is defined as the transfer of energy from one object to another. Energy can be categorized into two main types: potential energy and kinetic energy.

Potential energy is the energy that an object has due to its position or configuration. For example, a stretched spring has potential energy due to its stretched position, and a ball at the top of a hill has potential energy due to its height above the ground.

Kinetic energy, on the other hand, is the energy that an object possesses due to its motion. For example, a moving car has kinetic energy due to its velocity, and a spinning top has kinetic energy due to its angular velocity.

To learn more about Energy visit here:

brainly.com/question/1932868

#SPJ4

Precision is the ability of the instrument to measure the reading specifically in a closed interval.

When we perform experiments in physics we often come across the term precision.

The term Precision describes the ability of an instrument used in the experiment to measure the value without any variation.

We can understand this by an example, if there is an electronic scale that measures a length of thread to be 2 cm. Now again when we measure the length of thread it measures 2.1 cm and again when we do the same it measures 1.9cm.

So, as we can see that the electronic scale is measuring the values and the value is not wearing very much so we can say that the instrument has a high precision.

To know more about precision, visit,

https://brainly.com/question/5792909

#SPJ4