what is definition of precision?

Answers

Answer 1

Precision is the ability of the instrument to measure the reading specifically in a closed interval.

When we perform experiments in physics we often come across the term precision.

The term Precision describes the ability of an instrument used in the experiment to measure the value without any variation.

We can understand this by an example, if there is an electronic scale that measures a length of thread to be 2 cm. Now again when we measure the length of thread it measures 2.1 cm and again when we do the same it measures 1.9cm.

So, as we can see that the electronic scale is measuring the values and the value is not wearing very much so we can say that the instrument has a high precision.

To know more about precision, visit,

https://brainly.com/question/5792909

#SPJ4


Related Questions

what is the instrument used for measuring specific gravity? does the instrument needs calibration? if yes, how do you calibrate it? state the formula used for deriving the specific density from the measured specific gravity g

Answers

The answers to each question regarding specific gravity is given below.

What is specific gravity?Specific gravity, more formally known as relative density, is a measure of the density of a substance in comparison to the density of water.The ratio of the density of a substance to the density of a standard, usually water for a liquid or solid, and air for a gas.

Given is find the instrument used for measuring specific gravity.

The Baumé hydrometer, named for the French chemist Antoine Baumé, is calibrated to measure specific gravity on evenly spaced scales.Yes, the instrument needs calibration.The formula used for deriving the specific density from the measured specific gravity {g} is -

       [tex]$RD=\frac{\rho_{\text{substance}}}{\rho_{\text{reference}}}[/tex]

Therefore, the answers to each question regarding specific gravity is given above.

To solve more questions on specific gravity, visit the link below -

brainly.com/question/25384702

#SPJ1

how to convert pa to mpa

Answers

To convert pascals (Pa) to megapascals (MPa), you can divide the value in pascals by 1,000,000.

Megapascals (MPa) is a unit of pressure used in engineering and materials science to measure stress, strength, and hardness of materials. One megapascal is equal to one million pascals, and it is commonly used to express the tensile strength of materials such as metals, ceramics, and composites.

The concept of megapascals is based on Pascal's law, which states that the pressure applied to a fluid is transmitted uniformly in all directions. In materials science, this principle is applied to measure the strength of materials under different loading conditions. For example, the tensile strength of a material is the maximum stress it can withstand under tension before it breaks or deforms permanently.

Megapascals are commonly used to measure the tensile strength of materials such as steel, aluminum, and titanium. For instance, the tensile strength of high-strength steel used in construction can range from 400 to 800 MPa, while the tensile strength of aerospace-grade titanium alloys can range from 800 to 1,200 MPa.

In addition to measuring tensile strength, megapascals are also used to measure other material properties, such as yield strength, elastic modulus, and hardness. These measurements are important in designing and manufacturing products that are safe, durable, and reliable.

This is because one megapascal is equal to one million pascals.

So, the formula to convert pascals to megapascals is:

MPa = Pa / 1,000,000

For example, if you have a pressure of 5,000,000 pascals, you can convert it to megapascals using the formula:

MPa = 5,000,000 Pa / 1,000,000 = 5 MPa

Therefore, 5,000,000 pascals is equivalent to 5 megapascals.

To know more about megapascals here

https://brainly.com/question/22985582

#SPJ4

using the solar constant, estimate the rate at which the whole earth receives energy from the sun.

Answers

Using the solar constant,  the rate at which the whole earth receives energy from the sun is 1.475×10²⁴ W.

The solar constant (GSC) is a measure of the flux density of the sun's electromagnetic radiation (gross solar radiation) averaged per unit area. It is measured on the surface perpendicular to the light rays, one astronomical unit (au) from the sun (approximately the distance from the sun to the earth).

The solar constant includes radiation across the electromagnetic spectrum. The satellite measured a solar minimum (the period of the 11-year solar cycle when the number of sunspots is lowest) at 1,361 kilowatts per square meter (kW/m2), or about 0. Add 1% (about 1362 kW/m2) to the solar maximum.

According to the Question:

I = Solar constant of the sun = 1362 W/m²

(Using satellite measurements, the value is 1.3608 ± 0.0005 kW/m², the error is due to the solar production not always being constant)

r = Radius of earth = 6371 km = 6371000 m (mean radius)

A = Area of earth = (4/3)×π×r³

  = (4/3)× π ×6371000³

  = 1.083×10²¹ m²

Therefore,

   P = I×A

⇒ P = 1362× 1.083 ×10²¹

⇒ P = 1.475× 10²⁴ W

∴ Rate at which the whole Earth receives energy from the Sun is 1.475×10²⁴ W.

Learn more about Solar Constant:

https://brainly.com/question/28590490

#SPJ4

The mean weight of loaves of bread produced at the bakery where you work is supposed to be pound_ You are the supervisor of quality control at the bakery, and you are concerned that new employees are producing loaves that are too light. Suppose you weigh an SRS of bread loaves and find that the mean weight is 0.975 pound. A. State appropriate hypotheses for performing significance test: Be sure to define the parameter of interest. b.Explain why there is some evidence for the alternative hypothesis_ c. The P-value for the test in part (a) is 0.0806. Interpret the P-value_ d. What conclusion would you make at the & = 0.01 significance level?

Answers

A. The actual average weight of the bread loaves made at the bakery is one pound.

Alternative: Less than 1 pound is the actual average weight of bread loaves made in the bakery.

The population mean weight of bread loaves made in the bakery is an important variable.

B. The sample mean weight of 0.975 pounds is smaller than the predicted population mean weight of 1 pound, providing some support for the alternative hypothesis. This shows that the new workers might be making too-light loaves.

C. The test's P-value in component (a) is 0.0806. This indicates that there is an 8.06% chance of getting a sample mean weight of 0.975 pounds or less if the null hypothesis is true (i.e., the true population mean weight of loaves of bread is 1 pound).

D. If the P-value is less than 0.01 at the = 0.01 significance level, we would reject the null hypothesis. Since the P-value of 0.0806 is higher than 0.01, the null hypothesis cannot be rejected. As a result, we lack adequate data to draw the inference that the actual average weight of loaves of bread made at the bakery is less than one pound.

to know more "significance" at https://brainly.com/question/14529890

#SPJ4

how is steam different from water vapor?

Answers

The water vapour and steam are two forms of gaseous state of water. Each of them differs slightly from the other. They can be differentiated by few points explained below.

While all types of vapour are referred to as steam, not all types of vapour are considered to be steam. Water that is in its gaseous state is referred to as steam. In some situations, steam and water vapour are interchangeable terms. The term "steam" can also be used more colloquially to describe the combination of vapour and aerosol liquid water droplets suspended in the vapour.

When a material is heated to a vapourous state, steam is created. However, when a substance is kept in typical conditions, the steams that are generated are referred to as vapours.

This is explained with an example. When water is boiled, a significant quantity of steam is produced, which is extremely hot due to the energy it contains.

To know more about steam:

https://brainly.com/question/19052195

#SPJ4

b)to what form of energy do the chain molecules transfer the energy of the electrons?

Answers

In a chain molecule, the energy of electrons is transferred to chemical energy.

A chain molecule, also known as an electron transport chain, is a series of molecules located in the inner membrane of the mitochondria in eukaryotic cells or the plasma membrane in prokaryotic cells. This chain is involved in the process of oxidative phosphorylation, which is the final stage of cellular respiration that produces ATP, the primary energy currency of cells.

During oxidative phosphorylation, the chain molecules receive electrons from NADH and FADH2, which are produced in the previous stages of cellular respiration. As the electrons move through the chain, they lose energy, which is used by the chain molecules to pump protons (H+) across the membrane. This creates an electrochemical gradient, with a higher concentration of protons outside the membrane than inside.

The flow of protons back across the membrane through the ATP synthase enzyme drives the synthesis of ATP from ADP and inorganic phosphate. The energy released by this process is stored in the chemical bonds of the ATP molecule and can be used by the cell to power a wide range of biological processes.

To learn more about Chemical energy :

https://brainly.com/question/29510912

#SPJ4

QuestionWhat is the excess charge on a conducting sphere of radius R=0.15m if the potential of the sphere is 1500V and V=0 at infinity?A2.5μCB2.5nCC2.5mCD25nCMedium

Answers

The excess charge on a conducting sphere is 25nC.

What is a charge?

When matter is placed in an electromagnetic field, it creates a force due to its physical property known as electric charge. They can have a positive or negative charge (usually, by convention, carried by protons and electrons, respectively). Dissimilar charges attract and like charges repel. Neutral refers to objects that have no net electrical charge. Classical electrodynamics, the name given to our early understanding of charged particle interactions, can also be applied to problems that do not require consideration of quantum phenomena. Charge is a conserved property. That is, the net charge (the sum of the positive and negative charges of the isolated system) does not change. 

The excess charge of a conducting sphere can be determined using the sphere capacitance formula.

C = 4πε₀R

where C is the capacitance, ε₀ is the electrical constant, and R is the radius of the sphere.

The potential difference between a conducting sphere and infinity is given by the formula:

ΔV = V - V∞ = V

where V∞ is the potential at infinity, which in this case is zero.

The charge of a sphere can be calculated using the formula:

Q = CΔV 

To know more about a charge, check out:

brainly.com/question/15559400

#SPJ1

Why is the specific gravity of water 1?

Answers

The specific gravity of water is 1 because it is defined as the ratio of the density of a substance to the density of water.

Water is used as the reference substance for specific gravity because it is a common and well-known substance with a well-defined density. The density of water is 1 gram per cubic centimeter (g/cm³) at standard conditions, which are defined as a temperature of 4 degrees Celsius (39.2 degrees Fahrenheit) and a pressure of 1 atmosphere (101.325 kPa).

Since the specific gravity is the ratio of the density of a substance to the density of water, the specific gravity of water is 1 by definition. In other words, the specific gravity of any substance is its density divided by the density of water at standard conditions.

If the specific gravity of a substance is less than 1, it means that the substance is less dense than water, and if it is greater than 1, it means that the substance is more dense than water.

To know more about specific gravity here

https://brainly.com/question/9895615

#SPJ4

3. what type of drill rig would be best suited for soft, saturated soils A. Portable B.Auger C. Clay

Answers

The correct answer is option is  B. Auger. Because  an auger drill rig is specifically designed for drilling in soft soils. It uses a large rotating drill bit with a helical screw-like design to remove soil from the hole it is drilling.

Also, It is a popular choice for environmental and geotechnical drilling projects, as it can drill quickly and efficiently through soft, saturated soils.. Auger drills are available in a variety of sizes and configurations, and can be used with different drilling techniques, including direct push, rotary, and sonic drilling. Hence, the correct answer is option : B.

To know more about Auger Drill, here

brainly.com/question/7625289

#SPJ4

Pls help with this question it is giving me headache

Answers

Answer:

Explanation:no se wey

A tuna saw a marlin swimming toward it at 1 meter per second. To avoid the marlin, the tuna swam southwest for 6.8seconds at a constant velocity. In that time, the tuna swam 17meters. What was the tuna's velocity?

Answers

The velocity of the tuna is 4.1 meters per second and During the 6.8 seconds that the tuna swims southwest, it covers a horizontal distance of 17 meters.

We can use the Pythagorean theorem to determine the velocity of the tuna. Let's say that the velocity of the tuna has two components: a horizontal component (vx) and a vertical component (vy).

Therefore, we can say that:

vx = 17 meters / 6.8 seconds

vx = 2.5 meters per second

Now, we need to find the vertical component of the velocity (vy). We know that the marlin is swimming directly toward the tuna, which means that its velocity is entirely in the north direction. Therefore, the tuna needs to swim directly south to avoid the marlin.

The angle between the direction of the tuna's velocity and the direction of the marlin's velocity is 45 degrees (since the tuna is swimming southwest). Using trigonometry, we can find the vertical component of the tuna's velocity:

sin(45) = vy / v

vy = v * sin(45)

where v is the magnitude of the tuna's velocity.

Now, we can use the Pythagorean theorem to find the magnitude of the tuna's velocity:

v^2 = vx^2 + vy^2

v^2 = (2.5 m/s)^2 + (v * sin(45))^2

Solving for v, we get:

v = 4.1 meters per second

To know more about velocity here

https://brainly.com/question/16618732

#SPJ4

the manufacturer of a 12 v car headlight specifies it will draw a current of 6 a. you would like to check this claim with an ammeter designed to measure currents up to 10 a and having a resistance of 0.1 ohms. a). which of the two circuits in the attached figure represents a circuit where the ammeter correctly measures the current in the headlight?b) How much current (in A) would flow in the ammeter forCircuit a?
c) How much current (in A) flows through the ammeter for Circuitb?

Answers

A) Circuit A represents a circuit where the ammeter correctly measures the current in the headlight.

B) For Circuit A, the current flowing through the ammeter would be 6 A, as the ammeter has no resistance and is connected in series with the headlight.

C) For Circuit B, the current flowing through the ammeter would be 6 A - 0.1 A = 5.9 A.

What is ammeter ?

An ammeter is an electrical instrument used to measure electrical current. It is connected in series with the circuit and measures the current directly. The ammeter is a type of galvanometer, which is a device used to detect and indicate small electric currents. The ammeter works by generating a magnetic field around the current-carrying conductor and measuring the strength of the field with an electromagnet. The strength of the field is directly proportional to the current flowing through the conductor. The ammeter can measure both direct and alternating currents. It has a low resistance and is usually connected in series with the circuit to ensure that all the current flows through it. The ammeter can also measure very small currents, making it an important instrument in the study of electricity.

To learn more about ammeter
https://brainly.com/question/18634425
#SPJ1

best describes the energy of particles in a gas? 1

Answers

The kinetic energy of the particle of the gas best describes about the energy in a gas.

The energy possessed by a body by the virtue of its motion is called the kinetic energy of a body.

We know that the particles of the gas are in a continuous random motion and because these particles are in motion they will possess some kinetic energy and it is a very convenient things for us to calculate the kinetic energy of the body to have a rough idea about the energy that is present in the gas or we can say the particle of the gas.

To know more about kinetic energy, visit,

https://brainly.com/question/25959744

#SPJ4

Store size, cost savings, and repair costs are all important _______ which may impact Walmart’s decision to switch to LED lighting.

Answers

Store size, cost savings, and repair costs are all important financial impact. which may impact Walmart decision to switch to LED lighting.

Understanding how different components of a system or situation interact in complex and changing ways is known as financial impact. A change in the organization has an impact on other elements of the system. We can see that upgrading to LED lighting has an effect on other parts of the overall system in the Walmart scenario. Yet, the addition of LED illumination has no impact on the expenditures related to buying shop inventory or printing ads for weekly circulars. One factor that is dependent on other factors is a contingency. Managers can decide how to react to a situation by identifying critical contingencies. Walmart executives may decide that installing LED lighting in stores with less than 80,000 square feet is not cost-effective.

Learn more about  financial impact here

https://brainly.com/question/29603388

#SPJ4

a metal conducting sphere of radius r holds a total charge q. what is the charge enclosed by a gaussian sphere of radius r, where 0 < r < r?

Answers

The charge enclosed by a Gaussian sphere of radius r, where 0 < r < r, is q. This is because the charge enclosed by a Gaussian surface only depends on the total charge inside the surface, and not on the shape or size of the surface.

In this case, the conducting sphere of radius r is the same as the Gaussian sphere of radius r, so all of the charge q is enclosed by the Gaussian sphere. As the radius of the Gaussian sphere decreases to zero, the charge enclosed by the sphere also decreases to zero, since there is no charge inside the sphere

To know more about Gaussian sphere, here

brainly.com/question/29083956

#SPJ4

how many cups is liter

Answers

There are 4.2267528377 or approximately four cups are present in a liter.

A "cup" is an imperial measure. The standardized cup measure is relatively new. A "Liter" is a metric system unit of volume measurement equal to 1 cubic decimeter (or 0.001 m³). It was originally defined as the volume of one kilogram of water at 4 degrees Celsius, but it can also be used to measure other liquids. This means that both are units of volume. Unit conversion is the process of converting one unit to another using multiplication and division. There is a constant number that is multiplied or divided by one to change to another, this constant number is called the conversion factor. Now is the conversion formula for converting liters to cups

cup = liter × 4.2267528377

Here, conversion factor = 4.2267528377 and we have to convert one liter then number of cups in one liter = 1× 4.2267528377 = 4.2267528377 ~4 cups. So the desired value is 4.

To learn more about conversion factor, visit:

https://brainly.com/question/14811946

#SPJ4

Complete question:

How many cups are in a liter?

If You Increase The Distance Between The Plates Of A Capacitor, How Does The Capacitance Change? Not Sure Now Choose From One Of The Following Options Why? A. Doubling The Distance Between Capacitor Plates Will Reduce The Capacitance Four-Fold. B. Doubling The Distance Between Capacitor Plates Will Reduce The Capacitance Two-Fold. C. Doubling the distance between capacitor plates will increase the capacitance two times.
D. Doubling the distance between capacitor plates will increase the capacitance four times.

Answers

B. Doubling The Distance Between Capacitor Plates Will Reduce The Capacitance Two-Fold.  

What is Capacitor?

Capacitor is an electrical device used to store energy. It is composed of two conducting plates separated by an insulating material called the dielectric. When a voltage is applied to the two plates, an electric field forms between them, storing energy in the form of an electrical charge. Capacitors are used in a variety of applications, such as in filter circuits, timing circuits, and power supply circuits.

The capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between the plates. Therefore, when the distance between the plates is doubled, the capacitance is halved.

To learn more about Capacitor
https://brainly.com/question/27258294
#SPJ1

What causes absolute refractory period?

Answers

The absolute refractory period is a period of time after a neuron fires an action potential during which it is unable to fire another action potential, no matter how strong the incoming stimulus be.

This is caused by the opening and closing of ion channels in the neuron's cell membrane. During an action potential, the neuron's membrane potential rapidly depolarizes, meaning it becomes more positive, due to the influx of positively charged ions such as sodium. This depolarization activates voltage-gated ion channels that allow more positively charged ions to flow into the cell, which in turn causes the membrane potential to further depolarize.

However, during this depolarization phase, there is a brief period where voltage-gated potassium channels also open, allowing positively charged potassium ions to flow out of the cell. This outflow of positively charged potassium ions helps to repolarize the membrane potential, bringing it back towards its resting state.

After the potassium channels close, there is a brief period during which the membrane potential is hyperpolarized, meaning it becomes even more negative than its resting state. During this time, the neuron is in its absolute refractory period and is unable to fire another action potential, because the voltage-gated ion channels are closed and unable to respond to incoming stimuli.

To learn more about Absolute refractory :

https://brainly.com/question/28498676

#SPJ4

how to find spring constant with time

Answers

To find the spring constant (k) using time, you need to perform an experiment that involves measuring the motion of an object attached to a spring.

Perform the experiment of spring attached to mass m. You will displace the object and measure the time it takes to complete one full oscillation or period (T). Using the equation k = (4π^2m)/T^2, where m is the mass of the object, you can calculate the spring constant.

Repeat the experiment for different masses to verify that the spring constant remains constant. This method assumes that the motion of the object is simple harmonic motion, which is valid for small oscillations around the equilibrium position. The calculated spring constant may not be accurate if the displacement is too large.

To know more about the spring constant, here

brainly.com/question/14159361

#SPJ4

In a tube, standing-wave modes are found at 200 hz h z and 400 hz h z. What type(s) of tube it could be? check all that apply

Answers

A closed-closed tube with a length of 1.7 metres, an open-open tube with a length of 2 metres, and a closed-open tube with a length of 1.7 metres are the probable tube types that might generate standing-wave patterns at 200 Hz and 400 Hz.

The length of the tube and the sound speed in the medium inside the tube both affect the frequency of standing-wave modes in the tube. The following tube varieties may generate standing-wave modes at 200 Hz and 400 Hz:

A closed-closed tube:

This kind of tube has a node (zero displacements) at each end that is closed and has both ends.

A closed-closed tube's lowest frequency standing-wave mode has a wavelength that is four times its length, and its frequency is determined by the formula:

f = (nv)/(4L)

where

n is an integer,

v is the speed of sound,

L is the length of the tube.

If the tube generates standing waves at 200 Hz and 400 Hz, the fundamental frequency would be 100 Hz, and the tube length would be

L = (nv)/(4f) = (2v)/(4f) = v/(2f) = 1.7 metres.

This is because the frequency for the second harmonic (n=2) is 2f.

This is consistent with a 1.7 metre long tube that is closed at both ends.

An open-open tube:

This kind of tube has an antinode (maximum displacement) at either end and both ends are open.

An open-open tube's lowest frequency standing-wave mode has a wavelength that is twice its length, and its frequency is determined by the formula

f = (nv)/(2L)

If the tube generates standing waves at 200 Hz and 400 Hz, the fundamental frequency would be 100 Hz, and the tube length would be

L = (nv)/(2f) = (4v)/(2f) = 2 metres.

This is because the frequency for the second harmonic (n=2) is 2f.

This is consistent with a 2 metre long open-open tube.

A closed-open tube:

One end of this sort of tube is sealed off, while the other is left open.

A closed-open tube's lowest frequency standing-wave mode has a wavelength that is four times its length, and its frequency is given by

f = (2n-1)v/(4L),

where

n is an integer.

If the tube generates standing waves at 200 Hz and 400 Hz, the fundamental frequency would be 67 Hz, and the tube length would be

L = (2n-1)v/(4f) = (2v)/(4f) = v/(2f) = 1.7 metres.

This is because the frequency for the second harmonic (n=2) is 3f.

This is consistent with a 1.7 metre long closed-open tube.

for such more question on standing-wave modes

https://brainly.com/question/30670311

#SPJ4

Select the correct symbol and units for wavelength. Select all that apply.nmλ

Answers

The symbol for wavelength is λ (lambda) and the units are usually measured in nanometers (nm).

Wavelength is the distance between two successive crests or troughs of a wave, or the distance between two successive points of the same phase in a periodic wave. This can be applied to any kind of wave, including light, sound, water, and radio waves. Wavelengths can be measured in any unit of length, but the most common unit is the nanometer (nm). The wavelength is also related to the frequency of a wave and can be calculated by dividing the speed of the wave by the frequency. The wavelength of a wave determines its properties and behavior.

To learn more about wavelength click here https://brainly.com/question/13533093

#SPJ4

A sled is pulled with a rope that has a tension of 100.0 N. Find the power required to pull the sled a distance of 1.00 km in 20.0 min.

Answers

The amount of power needed to draw the sled 1.00 km in 20.0 minutes at a tension of 100.0 N is roughly 83.3 watts.

What is energy with labor power?

Energy is referred to as the ability to perform the work, whereas work is defined as the displacement of an object when a force (push or pull) is applied to it. It can be found in a variety of forms, including potential, kinetic, chemical, thermal, nuclear, electrical, and so forth.

We can apply the power equation:

Power is defined as the product of work, the quantity of energy needed to move the sled, and time, the length of the sled's motion.

Finding the work completed on the For work, we can apply the following formula:

work = force x distance

distance = 1.00 km x 1000 m/km = 1000 m

time = 20.0 min x 60 s/min = 1200 s

work = force x distance = 100.0 N x 1000 m = 100000 J

Finally, we can calculate the power required to move the sled:

power = work / time = 100000 J / 1200 s = 83.3 W.

To know more about power visit:-

https://brainly.com/question/11800127

#SPJ1

Ideas for uniform circular motion?This is for a physics lab if u can help please do

Answers

The time of motion of the satellite is 1.65 hours. The speed of the satellite from the centre of the Earth is 26,945.35 km/h.

What is the time of motion of the satellite?

This is the motion of an object in which the object travels in a straight line and its velocity remains constant along that line as it covers equal distances in equal intervals of time, regardless of time duration.

The time of motion of the satellite in hours is calculated as follows;

t = ( 99 min / 1 ) x ( 1 hour / 60 min )

t = 1.65 hours

The speed of the satellite from the centre of the Earth in km/h is calculated as follows;

v = ( 2πr ) / ( t )

where;

r is the distance of the satellite from the centre of the Earth

The position of the satellite above the surface of the Earth = 705 km

The radius of Earth = 6,371 km

The total distance of the satellite from the centre of the Earth = 705 km + 6,371 km = 7,076 km

v = ( 2π x 7076 ) / ( 1.65 )

v = 26,945.35 km/h

Learn more about the speed of satellite here: brainly.com/question/28106901

#SPJ1

The complete question is attached with the answer below.

What is the conversion of 14 c to f ?

Answers

The conversion of 14 degrees Celsius to Fahrenheit is 57.2 degrees Fahrenheit.

The equation F = 9/5C + 32 relates temperature measured in degrees Celsius (C) to degrees Fahrenheit (F). The formula is used to convert temperatures from Celsius to Fahrenheit , and vice versa. To use the formula, you simply plug in the known temperature in Celsius (or Fahrenheit), and then solve for the unknown temperature in Fahrenheit (or Celsius).

To convert Celsius to Fahrenheit, you would use the formula F = 9/5C + 32, where C is the temperature in Celsius and F is the temperature in Fahrenheit. Thus, for 17 degrees Celsius, the formula would be F = 9/5(14) + 32 = 57.2 F.

To know more about Celsius please refer:

brainly.com/question/14767047

#SPJ4

A higher frequency is often perceived as having lower pitch.
true
false

Answers

The given statement " A higher frequency is often perceived as having lower pitch" is false. Because  pitch is closely related to the frequency of a sound wave - the higher the frequency, the higher the pitch.

Pitch is a perceptual characteristic of sound that relates to the frequency of a sound wave. Frequency is the number of cycles of a sound wave that occur in one second, measured in Hertz (Hz).

Higher frequencies have more cycles per second than lower frequencies. Therefore, when we hear a sound with a higher frequency, our brain interprets it as having a higher pitch.

It is possible that the question may have been asking about the perception of the amplitude (volume) of a sound wave. In this case, it could be true that a higher frequency sound is perceived as having a lower volume, as some frequencies may be less audible to the human ear. However, it is important to note that the original question was about pitch, not volume.

Therefore, the given statement is false

Learn more about frequency here

brainly.com/question/12244387

#SPJ4

Creating a Multimedia Presentation about

Satellite Technology Careers - Student Guide

Answers

You could pursue a career in oceanography, aircraft safety, energy conservation, air quality control, space exploration, or education. The most thorough and economical method for remotely monitoring these systems is via satellite.

What is meant by Satellite Technology?

Weather forecasting, remote sensing, geo-positioning, navigation, television, and telephony are a few of the services that satellites may offer for disaster risk management and emergency response.

For the purpose of taking pictures, atmospheric sounding, satellite communication, geo-positioning, and navigation, equipment onboard the satellites circling the Earth is created to cover a range of wavelengths in the electromagnetic spectrum.

Depending on the use or instrumentation, satellites orbit the Earth in a variety of ways: A satellite in a geostationary orbit revolves around the planet simultaneously with the rotation of the planet above the equator (0° latitude).

Learn more about Satellite Technology, from :

brainly.com/question/8376398

#SPJ1

a roller coaster climbs up a hill at 4 m/s and then zips down the hill at 30 m/s. the momentum of the roller coasteris greater up the hill than down the hillis greater down the hill than up the hillremains the same throughout the rideis zero throughout the ride

Answers

The momentum of the roller coaster remains the same throughout the ride. Option c is correct.

Momentum is defined as the product of an object's mass and velocity. In this case, the roller coaster has a certain mass and is moving at different velocities as it goes up and down the hill. However, momentum is a conserved quantity, meaning that the total momentum of the system (the roller coaster and the Earth) remains constant as long as no external forces act on it.

Therefore, even though the roller coaster is moving at different velocities up and down the hill, its momentum remains the same throughout the ride. This is because the increase in velocity down the hill is balanced by the decrease in velocity up the hill, and the roller coaster's mass remains constant. So, the correct answer is option (c): the momentum of the roller coaster remains the same throughout the ride.

To know more about the momentum, here

brainly.com/question/30677308

#SPJ4

--The complete question is, A roller coaster climbs up a hill at 4 m/s and then zips down the hill at 30 m/s. The momentum of the roller coaster

a. is greater up the hill than down the hill

b. is greater down the hill than up the hill

c. remains the same throughout the ride

d. is zero throughout the ride--

how to convert mph to ft/s

Answers

To convert miles per hour (mph) to feet per second (ft/s), you can use the following formula: 1 mph = 1.46667 ft/s

Miles per hour (mph) is a unit of measurement for speed commonly used in the United States, the United Kingdom, and a few other countries. It represents the distance of one mile traveled in one hour.

To convert miles per hour to other units of speed, you can use the following conversions:

1 mph = 1.609344 km/h (kilometers per hour)

1 mph = 0.86897624 knots (knots)

1 mph = 1.46666667 ft/s (feet per second)

1 mph = 0.44704 m/s (meters per second)

To convert a specific speed from miles per hour to one of the above units, simply multiply the speed in mph by the appropriate conversion factor. For example, to convert 60 mph to kilometers per hour:

60 mph * 1.609344 km/h = 96.56064 km/h

Therefore, 60 mph is equivalent to approximately 96.56 kilometers per hour.

This means that for every one mile per hour, there are approximately 1.46667 feet per second.

To convert a specific speed from mph to ft/s, simply multiply the speed in mph by 1.46667. For example, to convert 60 mph to ft/s:

60 mph * 1.46667 ft/s = 88 ft/s

Therefore, 60 mph is equivalent to 88 ft/s.

To know more about miles per hour here

https://brainly.com/question/17669518

#SPJ4

What is the distance the upper spring is extended from its unstretched length? Now, three masses m1 = 3.3 kg, m2 = 9.9 kg and m3 = 6.6 kg hang from three identical springs in a motionless elevator. The springs all have the same spring constant of 229.57N/m Now the elevator is moving downward with a velocity of v = -2.3 m/s but accelerating upward with an acceleration of a = 4.8 m/s2. (Note: an upward acceleration when the elevator is moving down means the elevator is slowing down.) What is the distance the upper spring is extended from its unstretched length?

Answers

The extensions of the middle and lower springs are 0.3209 m and 0.1988 m, respectively, from their unstretched lengths.

We can solve this problem using the concept of equilibrium and the equations of motion. In equilibrium, the weight of each mass is balanced by the force exerted by the spring, so we have:

m₁g = kx₁

m₂g = kx₂

m₃g = kx₃

where g is the acceleration due to gravity, k is the spring constant, and x₁, x₂, and x₃ are the extensions of the three springs from their unstretched lengths.

When the elevator is moving with constant velocity, the forces on the masses are still balanced, so the extensions of the springs are unchanged. However, when the elevator is accelerating, the forces on the masses are no longer balanced, and the extensions of the springs will change. We need to take into account the pseudo-force experienced by the masses due to the acceleration of the elevator.

The pseudo-force on each mass is given by:

F' = m × a

where m is the mass of the object and a is the acceleration of the elevator. For m₁, m₂, and m₃, the pseudo-forces are:

F₁' = m₁a = 3.3 kg × 4.8 m/s² = 15.84 N

F₂' = m₂a = 9.9 kg × 4.8 m/s² = 47.52 N

F₃' = m₃a = 6.6 kg × 4.8 m/s² = 31.68 N

To calculate the new extensions of the springs, we need to add the pseudo-forces to the weights of the masses and then divide by the spring constant. For the upper spring, which is attached to m₁, we have:

kx₁ = m₁g + F₁'

x₁ = (m₁g + F₁')/k

Substituting the values, we get:

x₁ = (3.3 kg × 9.81 m/s² + 15.84 N)/(229.57 N/m) = 0.1003 m

So the upper spring is extended by 0.1003 m from its unstretched length.

For the other two springs, we have:

x₂ = (m₂g + F₂')/k = (9.9 kg × 9.81 m/s² + 47.52 N)/(229.57 N/m) = 0.3209 m

x₃ = (m₃g + F₃')/k = (6.6 kg × 9.81 m/s² + 31.68 N)/(229.57 N/m) = 0.1988 m

Learn more about spring here: brainly.com/question/14670501

#SPJ4

1. This is an electric multi-meter: (Attachment below)

Based on the labels and your understanding of electricity, what is the device currently measuring, based on its setting and current display? What setting(s) would you use to measure resistance? Which setting(s) would measure current?

2. How does electrical current theory contribute to the fact that so many electronic devices, like light bulbs, are so easily scalable, measurable, and quantifiable?

Answers

The rate at which an electric charge flows through a conductor with regard to time is what is known as the electric current.

What is Electric current?

It results from the free electrons drifting through a conductor in a specific path.

As we are all aware, the unit of measurement for electric change is the Coulomb, the unit of measurement for current is the Coulombs per second, and the logical unit of current is named Ampere in honor of the eminent French scientist André-Marie Ampere.

Current I = Q / t coulombs per second or amps if total Q Coulomb charge travels through a conductor by time t.

Therefore, The rate at which an electric charge flows through a conductor with regard to time is what is known as the electric current.

To learn more about Electric current, refer to the link:

https://brainly.com/question/2264542

#SPJ1

Other Questions
n december 31, 2024, the end of the fiscal year, california microtech corporation completed the sale of its semiconductor business for $13 million. the semiconductor business segment qualifies as a component of the entity according to gaap. consider the following additional information. the book value of the assets of the segment at the time of the sale was $12 million. the loss from operations of the segment during 2024 was $3.9 million. pretax income from other continuing operations for the year totaled $6.5 million. the income tax rate is 25%. prepare the lower portion of the 2024 income statement beginning with income from continuing operations before income taxes. note: loss amounts should be indicated with a minus sign. enter your answers in whole dollars and not in millions. for example, $4,000,000 rather than $4. 1 microcentury is equal to how many minutes give a definition of oppression in historical words your friend has heard about the benefits of probiotics and asks if you have any recommendations of foods that are good sources of probiotics. which foods would you recommend? You manage inventory for your company and use a continuous review inventory system to control reordering items for stock. Your company is open for business 300 days per year. One of your most important items experiences demand of 16 units per day, normally distributed with a standard deviation of 4 units per day. You experience a lead time on orders from your supplier of seven days with a standard deviation of three days. The unit price, regardless of order size, is $5.95. Your ordering cost is $11. Your inventory carrying cost is 20 percent. You have established a service level policy of 90 percent on this item. Use Table 7-2.a. What is your optimal order quantity? (Round up your answer to the next whole number.)b. What is your reorder point? (Round your answer to the nearest whole number.)c. How much safety stock do you carry? (Do not round intermediate calculations. Round up your answer to the next whole number.) how was it determined that dna carries genetic information QuestionHow many turn(s) of Calvin cycle is/are required for the synthesis of one molecule of glucose?A1B3C6D10 Please select the word from the list that best fits the definition the specific individuals, groups, and institutions that enable socialization to take place. Guys help!!Slope of one of the dotted lines:Slope of the line of reflection: What is another word for implement? Imagine you are the district attorney of your county and are about to face a 20% budget cut in the next fiscal year, which would mean that 20% of your prosecutors would be laid off. The layoffs would mean that your office would not be able to prosecute most misdemeanor cases and up to 10% of felony cases. You are forced to choose between prosecuting auto theft or domestic violence cases. Which one would it be and why? your friend finds the slope and y - intercept of the graph of the equation y= 4x -3 Is your friend correct? Which type of organic molecule serves as long-term energy storage in humans?a. Proteinsb. Starchc. Nucleic Acidd. Fats (Triglycerides)e. B and D which device would you most likely find in the home of a hearing person but not in the home of a deaf person today?a counter timer wireless speaker system bed shakera teletypewriter A conflict of interest may occur when a person holds a position of trust that ______.requires judgment on behalf of othersrequires judgment for only oneself Estimate the following difference by replacing each fraction with 0, 12, or 1.78611Drag numbers to the boxes to complete your answer.Numbers may be used more than once, or not at all. FILL IN THE BLANK. Plant cells have large central ______ where water, salts, and sugars are stored and where materials are broken down and recycled with enzymes similar to lysosomes in animal cells. For questions 1-2 simplify the rational expression p^2-4p-32/p+4. your heart is made up of similar _____ working together what the greek goddesses and gods were like and unlike humans guided reading