what is the molality of a solution that contains 16.32 g of glucose, c6h12o6, in 505.0 g of water? group of answer choices 0.356m 0,0900m 0.180 m 0.0323 m

The combinations of the solutions will produce one or more precipitates the correct options are :

CaBr₂  +  K₃PO₄

AgNO₃  +  NH₄Br

The combinations of the solutions that will produce one or the more precipitates are as follows :

The chemical equation are as follows :

3CaBr₂(aq)  +  2K₃PO₄(aq)  ---->  Ca₃(PO₄)₂(s)   +  6KBr(aq)

In this reaction the precipitate is Ca₃(PO₄)₂.

AgNO₃(aq)  +  NH₄Br(aq)   --->  AgBr(s)  +  NH₄NO₃(aq)

In this reaction the precipitate is AgBr.

The precipitate in the process of the conversion of dissolved substances in to the insoluble solid from the super saturated solution. The solid which is formed in the reactionis called as the precipitate.

To learn more about precipitates here

https://brainly.com/question/13691730

#SPJ4

The result if heat is added to an endothermic reaction is that it will increasing the amounts of the products and will decreasing the amounts of the reactants.

If the reaction is the endothermic reaction and if we add the heat to the endothermic reaction then it will  increase in the temperature and it will cause the forward reaction to occur, and increasing the amounts of the products and will decreasing the amounts of the reactants. The Lowering of the temperature will be produce the opposite of the response.

Thus, the increase in the amount of the product occurs if we add the heat to the endothermic reaction.

To learn more about endothermic reaction here

https://brainly.com/question/23184814

#SPJ4

The formal charge of a nitrogen atom that has no lone pairs and forms two double bonds is +1 .

The atomic number of nitrogen is 7. This indicates that the number of electrons present in nitrogen are 7 and hence the electronic configuration for it is 2,5.

This indicates that the valence electrons in nitrogen are 5. Valence electrons of an atom are the number of electrons present its outermost shell.

Now , Nitrogen has 5 valence electrons and it is forming two double bonds. While the formation of bonds sharing of electrons takes place , therefore , 4 electrons get shared and one electron remains.

Now to gain stability , Nitrogen loses one electron and has +1 charge on it.

To know more about formal charge refer :

https://brainly.com/question/18102056

#SPJ4

When carbonated beverage is sealed, then it is saturated with carbon dioxide. Option B is correct.

The carbonation process involves in the dissolving carbon dioxide gas in water under high pressure, and when the pressure is released, some of the gas escapes and forms bubbles. The remaining carbon dioxide in the liquid is in a state of equilibrium with carbon dioxide in the gas phase, which means that solution is saturated with carbon dioxide at that pressure and temperature.

A carbonated beverage is a drink that has been infused with carbon dioxide gas under high pressure, resulting in a bubbly and fizzy texture. The carbonation process occurs when carbon dioxide gas is dissolved in water, which then forms carbonic acid. This carbonic acid is responsible for the tangy taste and slight burn that is often associated with carbonated beverages.

Hence, B. Saturated with carbon dioxide is the correct option.

To know more about carbonated beverage here

https://brainly.com/question/2029096

#SPJ4

The hydrocarbon among the given choices is option A, C3H8. Hydrocarbons are organic compounds that contain only hydrogen and carbon atoms, and C3H8, also known as propane, is a simple alkane hydrocarbon with three carbon atoms and eight hydrogen atoms.

Option B, CO2, is not a hydrocarbon as it does not contain hydrogen atoms, but it is a simple inorganic molecule made up of one carbon atom and two oxygen atoms.

Option C, C6H12O6, is a carbohydrate, which is an organic compound made up of carbon, hydrogen, and oxygen atoms. It is also known as glucose, which is an important source of energy for living organisms.

Option D, H2CO3, is a weak acid also known as carbonic acid, which is formed when carbon dioxide dissolves in water. It is not a hydrocarbon as it contains oxygen in addition to carbon and hydrogen.

Option E, CCl2F2, is a chlorofluorocarbon (CFC), which is an organic compound that contains chlorine, fluorine, and carbon atoms. It is not a hydrocarbon as it contains chlorine and fluorine atoms in addition to carbon and hydrogen.

Find out more about Hydrocarbon

brainly.com/question/1626020

#SPJ4

The photo shows the mineral calcite which upon reaction with dilute acid produce carbon dioxide gas. This gas is evolved out as bubbles.

Minerals are naturally occurring inorganic compounds with a definite composition and sharp edged crystalline structures. There are a number of mineral depositions in the nature made of calcium, phosphorous, sodium etc.

Calcite is a mineral made of calcium carbonate. Calcium carbonate is very abundant and essential mineral in the earth crust. When calcium carbonate reacts with mineral dilute acids, it gives carbon dioxide gas.

The reaction with HCl is given here:

https://brainly.com/question/11737819

#SPJ1

The image related to the question is given below:

[tex]\rm CaCO_{3} + 2HCl \rightarrow CaCl_{2} + H_{2}O + CO_{2}[/tex]

The release of carbon dioxide gas is appearing as bubbles. Hence, the mineral is calcite.

Find more on calcite:

#SPJ1

The Byzantine Generals Issue is a game theory issue that highlights how difficult it is for dispersed parties to reach consensus without the aid of a reliable central authority.

The inspiration for BFT came from the Byzantine General's Dilemma, a logical thinking exercise where several generals must assault a city. Byzantine Mistake One of the fundamental requirements for creating reliable blockchain rules or features is tolerance. The Byzantine Generals Issue is a game theory issue that highlights how difficult it is for dispersed parties to reach consensus without the aid of a reliable central authority. The phrase gets its name from an allegory known as the "Byzantine generals issue," which was created to explain a scenario in which the system's actors must agree on a concerted approach to prevent catastrophic breakdown of the system, yet some of these individuals are unreliable.

Learn more about Byzantine General's here:

https://brainly.com/question/10819385

#SPJ4

The atomic number of an element tells you the number of  Electrons & Proton

A stable subatomic particle with the symbol P, H+, or 1H+, a proton has an electric charge of +1 e. Its mass is 1,836 times greater than that of an electron and only slightly less than that of a neutron. Nucleons are the collective name for protons and neutrons, which have masses of roughly one atomic mass unit apiece.

The positively charged particles called protons are found in the atom's nucleus. The strong force, which is stronger at short distances, pulls the protons together while the electromagnetic force pushes them apart.

Learn more about proton here:

https://brainly.com/question/1805828

#SPJ1

The two products formed when 1-chlorobutane is treated with sodium hydroxide are 1-butene and 1-butanol.

The common name of 1-chlorobutane is Butyl chloride. The reaction of  1 -chlorobutane with sodium hydroxide is catalyzed by sodium iodide to give 1 -butanol.

1-Butene is the compound with the formula CH₃CH₂CH=CH₂. This is a colorless gas which easily condensed to give a colorless liquid. 1-butene is classified as a linear alpha-olefin. It is the organic compound with the formula CH3CH2CH=CH2.

1-Butanol is known as butan-1-ol or n-butanol. It is a primary alcohol with the chemical formula C₄H₉OH. It is of linear structure. The Isomers of 1-butanol are butan-2-ol and tert-butanol. It refers to the straight chain isomer.

To learn more about 1-Chlorobutane please visit:

https://brainly.com/question/26615309

#SPJ4

Chemical combination refers to the ability of matter to react with other substances and form new compounds.

Atoms, which are the basic units of matter, can combine with each other through various chemical bonds to form molecules. These molecules can then react with other molecules to form new compounds with different properties.

The ability of matter to combine chemically is determined by the electron configuration of the atoms. Atoms with incomplete electron shells tend to be more reactive and can easily form chemical bonds with other atoms. This ability to form chemical bonds allows for the formation of complex molecules and compounds, which are essential for life and many technological advancements.

Chemical combination plays a critical role in various fields such as medicine, agriculture, and materials science. Understanding the principles of chemical combination can help us design new molecules and compounds with desired properties and functions, leading to the development of new technologies and products.

Learn more about compounds:

brainly.com/question/13516179

#SPJ4

To convert milligrams per liter (mg/L) to parts per million (ppm), you can use the following formula:ppm = mg/L x 1 The "x 1" is necessary because mg/L and ppm are actually equivalent units of measurement.

Milligrams per liter (mg/L) and parts per million (ppm) are both units of measurement commonly used to express the concentration of a substance in a solution. While these units may appear to be different, they are actually equivalent and can be used interchangeably.

To convert mg/L to ppm, simply multiply the mg/L value by 1. Since 1 mg/L is equivalent to 1 ppm, the value remains the same. For example, if a solution has a concentration of 50 mg/L of a particular substance, the concentration is also 50 ppm.

Conversely, if a solution has a concentration of 25 ppm, the concentration is also 25 mg/L. It's important to note that the conversion between mg/L and ppm is only valid when dealing with solutions where the density is equal to 1 g/mL. If the density is different, then the conversion will require additional calculations.

Overall, understanding the conversion between mg/L and ppm is crucial for accurate reporting and understanding of the concentration of substances in a solution.

To know  about to convert from milligrams per liter to parts per billion (ppb), visit:https://brainly.com/question/13184254

#SPJ4

The industrial production of the nitrogen-containing fertilizer is currently limited by the limited supply of a N₂ gas. Option D is correct.

Nitrogen gas (N₂) is the most abundant component of air, but it is relatively unreactive and cannot be easily converted into biologically useful forms. The industrial production of nitrogen-containing fertilizers such as ammonia (NH₃) and urea (CO(NH₂)₂) requires the conversion of atmospheric nitrogen to a reactive form, which is typically accomplished using the Haber-Bosch process.

However, this process requires large amounts of energy and relies on nonrenewable resources, making it environmentally and economically unsustainable. Therefore, finding alternative, more sustainable methods for nitrogen fixation is an important goal for agricultural and industrial applications.

Hence, D. the limited supply of N₂ gas is the correct option.

To know more about Nitrogen gas here

https://brainly.com/question/11426882

#SPJ4

92.6amu is the average atomic mass of this element. Atoms that belong to the same element can have various numbers of neutrons.

Understanding the idea of isotopes is necessary in order to determine average atomic mass. Atoms that belong to the same element can have various numbers of neutrons in their nuclei, which leads to variations in the atomic masses and mass numbers of atoms that share a single atomic number.

Three carbon isotopes, for instance, are carbon-12, carbon-13, and carbon-14. Carbon-12 has a neutron count of 6 and a mass of 12 amu, carbon-13 has a neutron count of 7 and a mass of 13 amu, while carbon-14 has a neutron count of 8 and a mass of 14 amu.

average atomic mass = (natural abundance) (atomic mass of first isotope) + (natural abundance) (atomic mass of second isotope)

The average atomic mass of carbon is =

(0.51) (90) + (0.11) (91) + (0.17) (92)+ (0.17) (94) + (0.02) (96) =92.6amu

Therefore, 92.6amu is the average atomic mass of this element.

To know more about average atomic mass, here:

https://brainly.com/question/14250653

#SPJ9

The exothermic phases in solution formation are as follows: determining the solute-solvent intermolecular forces.

In order to create a homogenous mixture, a solvent must first dissolve another chemical material. The solvent, which defines whether a substance is in solid, liquid, or gas form physicochemically, is the component of the solution that is most abundant.

The substance being dissolved is known as the solute, and the dissolving agent is known as the solvent. Solutions can be created using a wide variety of solutes and solvents. We are familiar with a diverse set of methods.

To know more about Solvent visit:

https://brainly.com/question/30452436

#SPJ1

Option C. polar covalent bond. When carbon and oxygen atoms bond, they form a covalent bond, which is a type of chemical bond where atoms share electrons.

The oxygen atom has a higher electronegativity value than the carbon atom, meaning it has a stronger pull on the shared electrons. As a result, the electrons in the bond spend more time around the oxygen atom, giving it a partial negative charge, and less time around the carbon atom, giving it a partial positive charge. This results in a polar covalent bond, where the electrons are not equally shared between the atoms, but rather shifted toward the more electronegative oxygen atom.

Learn more about covalent bond here: brainly.com/question/19382448

#SPJ4

In contrast to mitochondria, chloroplasts contain a collection of interconnected and layered, fluid-filled membrane sacs known as thylakoids within the region encircled by their inner membrane.

Thylakoids' main jobs involve capturing light energy and converting it into ATP and NADPH, two chemical energy molecules. Water is oxidized during this process, releasing oxygen.

The interior network of linked membranes called as thylakoid membranes of the a chloroplast is responsible for carrying out the photochemical light reactions. They are structured into stacked and unstacked sections, referred to as grana & stroma thylakoids, respectively, which are variably enriched with photosystem I and II complexes.

To know more about thylakoids visit:

https://brainly.com/question/13050631

#SPJ1

Zinc oxide has the chemical symbol ZnO. One zinc atom and one oxygen atom, bound together by an ionic connection, make up the binary molecule. Zinc oxide is a white, powdered chemical that is frequently

Zinc oxide is a popular material that is utilised in many different applications. It is white and granular. One zinc atom and one oxygen atom, bound together by an ionic connection, make up its composition. Due to its capacity to absorb ultraviolet (UV) radiation, zinc oxide is frequently used as a paint pigment and as an ingredient in sunscreens, ointments, and other skincare products. Moreover, it serves as a food additive and is utilised in the production of rubber, ceramics, and glass. Since it possesses antibacterial qualities, zinc oxide is added to some goods to stop the growth of germs and fungus. Also, due to its possible health advantages, such as immune system support and wound healing,

Learn more about Zinc oxide here:

https://brainly.com/question/24161370

#SPJ4

Part A) The average number of drops per mL of benzene is 19.33 drops/mL

Part B) The average number of drops for the monolayer is 8.33 drops.

Part C)  0.43 mL of oleic acid/benzene is required to make a monolayer.

Part D)  each drop of solution contains 0.00002 g of oleic acid.

Part E) one drop of oleic acid takes up roughly 0.000022 mL.

Part A)  To find the average number of drops per mL of benzene, add the drops from each experiment and divide by the number of trials:

 (21 drops + 20 drops + 17 drops) / 3  = (19.33 drops/mL)

Part B) We sum the values and divide by the number of values to determine the average number of drops for the monolayer:

 (8 drops + 9 drops + 8 drops) / 3 = 8.33 drops

Part C) To calculate the mL of oleic acid/benzene required to produce a monolayer, multiply the average number of drops required for the monolayer by the mL per drop of benzene determined in Part A:

8.33 drops x (1 mL / 19.33 drops) = 0.43 mL

Part D) Using the concentration of the solution, we can determine how many grams of oleic acid are in one drop of the solution:

0.02 g/L = 0.00002 g/mL

Because the density of the solution is not specified, we presume it is the same as that of benzene, which is 0.879 g/mL. As a result, the mass of one mL of solution is:

0.879 g/mL x 1 mL = 0.879 g

The mass of oleic acid in one drop of the solution may now be calculated:

0.00002 g/mL / 1 mL x 1 drop = 0.00002 g/drop

Part E) We need to utilise the density of oleic acid, which is 0.895 g/mL, to calculate the volume in mL that one drop of oleic acid occupies:

0.00002 g / 0.895 g/mL = 0.000022 mL

For more such questions on benzene, click on:

https://brainly.com/question/14788042

#SPJ4

The probable question may be:

Part A) Using a graduated cylinder, you calibrate the pipet you will be using and the values you collect are as follows. What is the average number of drops per mL of benzene.

21 drops

20 drops

17 drops

part B) After calibration, you use the oleic acid/benzene solution to form a monolayer. It takes 8 drops , 9 drops and 8 drops before the layer on the water solution starts to make a bubble that does not go into solution. What is the average number of drops for your monolayer?

part C) Since we have the number of drops it takes to make a monolayer and we have the number of drops it takes to make one mL of benzene, we can determine the mL of oleic acid/benzene it takes to form a monolayer.

part D) Next we need to determine the mass of oleic acid in the monolayer. The concentration of the oleic acid/benzene solution is 0.02g/L. Calculate how many grams of oleic acid is in one drop.

part E) With this information, we now need to calculate the volume in mL the drop of oleic acid occupy using the density of 0.895 g/mL and the number of drops of oleic acid solution used.

The sequence of events for a scientific investigation  involves the following steps:

The scientific method is an empirical way of learning that entails thorough observation and applying severe skepticism to what is observed because one's interpretation of the observation can be distorted by cognitive presumptions.

Hypotheses and experiments are conducted to reach a acomnclusion.

Learn more about the scientific investigation at: https://brainly.com/question/17216882

#SPJ1

The basic formula of sugar is CₙH₂ₙOₙ, where "n" represents the number of carbon atoms in the molecule and "2n" represents the number of hydrogen atoms.

"Sugar" is a term used to describe a variety of sweet-tasting, water-soluble compounds that are commonly used as food additives or sweeteners. The most common type of sugar is sucrose, which is a disaccharide composed of glucose and fructose. The chemical formula for sucrose is C₁₂H₂₂O₁₁, which means it contains 12 carbon atoms, 22 hydrogen atoms, and 11 oxygen atoms.

Other types of sugars include glucose, fructose, and lactose, which have different molecular formulas but still follow the basic formula of CₙH₂ₙOₙ. Glucose, for example, has the molecular formula C₆H₁₂O₆, which means it contains 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms.

Sugars are important sources of energy for living organisms, and are commonly found in fruits, vegetables, and other plant-based foods. They are also used as sweeteners in processed foods and beverages, and can be refined from sugar cane, sugar beets, or other sources.

While sugars can provide energy and contribute to the flavor of foods, excessive consumption of added sugars has been linked to a variety of health problems, including obesity, diabetes, and cardiovascular disease. As such, many health experts recommend limiting the intake of added sugars and choosing whole foods that contain natural sugars instead.

To know more about soluble compounds: https://brainly.com/question/24300575

#SPJ4

The  prokaryotic cell and eukaryotic cell both contain the ribosomes. The Ribosomes are the non - membrane bound organelles.

The Eukaryotic cells contain the membrane - bound the organelles, such as the nucleus, the endoplasmic reticulum, the mitochondria while the prokaryotic cells do not contain the nucleus, endoplasmic and the mitochondria but the ribosome is the organelle that can be seen in the  both the prokaryotic cell and the eukaryotic cell.

The Prokaryotic and the eukaryotic ribosomes that is perform by the same functions that is the protein synthesis, however, the eukaryotic ribosomes are the much larger than the prokaryotic cell.

To learn more about prokaryotic here

https://brainly.com/question/13273192

#SPJ4

Answer:

Increasing atomic number

Explanation:

D

The electronegativity difference between carbon and oxygen atoms is 3.44 - 2.55 = 0.89. The type of bond forms between carbon and oxygen is polar covalent bond.

According to the Pauling electronegativity scale, a difference in electronegativity of less than 1.7 indicates a polar covalent bond. Therefore, carbon and oxygen form a polar covalent bond in most cases, where the oxygen atom has a partial negative charge and the carbon atom has a partial positive charge.

This polarity in the bond arises because oxygen is more electronegative than carbon, and attracts electrons more strongly than carbon does, resulting in unequal sharing of electrons between the two atoms.

To know more about electronegativity here

https://brainly.com/question/17762711

#SPJ4

Reducing the number of cows we raise for meat would probably be the most effective way to reduce the amount of methane released into the atmosphere

Methane is a potent greenhouse gas that contributes to global warming, so reducing its emissions is important in mitigating climate change. Here are some ways to reduce methane:

Reduce or eliminate the use of fossil fuels: Methane is released during the extraction, production, and transport of fossil fuels such as coal, oil, and natural gas. By using renewable energy sources like solar or wind power instead, we can reduce our dependence on fossil fuels and the associated methane emissions.

Reduce waste: Methane is produced when organic waste decomposes in landfills, wastewater treatment plants, and agricultural operations. By reducing the amount of waste we produce and by implementing better waste management practices, such as composting and anaerobic digestion, we can reduce methane emissions.

Use methane as a fuel: Methane can be captured and used as a fuel for electricity generation, heating, and transportation. This is known as biogas, and it can be produced from sources such as livestock manure, agricultural waste, and wastewater. Using biogas as a fuel reduces the amount of methane released into the atmosphere while providing a renewable energy source.

Read more on methane here:https://brainly.com/question/25649765

#SPJ1

Answer:

YES

Explanation:

1. First write out a balanced chemical equation:

AgNO₃(aq) + NaBr(aq) → NaNO₃(aq) + AgBr(?)

2. If you don't know the acronym SNAAP, then this will be good to memorise. SNAAP stands for sodium, nitrate, ammonium, acetate, potassium, which are ALL and ALWAYS soluble. They will NEVER form precipitates.

3. Therefore, it all rests on determining if silver bromide will form a precipitate on you. The best method of determining this is with a solubility chart. In highschools in several countries, you will be provided with a data sheet that has this on it. I have provided an example of this.

4. The Ksp constants represent the solubility of the compound. The smaller the value, the less soluble the compound. The greater the value, the more soluble the compound. Using this information, we can take the Ksp for Silver bromide (AgBr), which is 5.35×10⁻¹³. Since this is a very very small number, therefore, silver bromide will form a precipitate.

Yes, the student will observe a precipitate.

Precipitation reactions occur when cations and anions in aqueous solution combine to form an insoluble ionic solid called a precipitate. Whether or not such a reaction occurs can be determined by using the solubility rules for common ionic solids.

Precipitation reactions are usually double displacement reactions involving the production of a solid form residue called the precipitate.

These reactions also occur when two or more solutions with different salts are combined, resulting in the formation of insoluble salts that precipitate out of the solution.

In this reaction,

AgNO₃(aq) + NaBr(aq) → NaNO₃(aq) + AgBr(s)

Therefore, Yes, the student will observe a precipitate.

Learn more about precipitation reaction, here:

https://brainly.com/question/29762381

#SPJ2

In sexual reproduction, the source of genetic material in a zygote is a combination of the genetic material from both parents.

Zygote, fertilized egg cell thаt results from the union of а femаle gаmete (egg, or ovum) with а mаle gаmete (sperm). In the embryonic development of humаns аnd other аnimаls, the zygote stаge is brief аnd is followed by cleаvаge, when the single cell becomes subdivided into smаller cells.

The zygote represents the first stаge in the development of а geneticаlly unique orgаnism. The zygote is endowed with genes from two pаrents, аnd thus it is diploid (cаrrying two sets of chromosomes). The joining of hаploid gаmetes to produce а diploid zygote is а common feаture in the sexuаl reproduction of аll orgаnisms except bаcteriа.

For more information about zygote refers to the link: https://brainly.com/question/29769026

#SPJ11

Answer:

The correct order of the statements to describe how fireworks produce color is:

E) The electrons are in the ground state in the atom. This is when the electrons are in the lowest energy level.

A) The element is placed in the flame where energy is added to the electrons.

D) The addition of the energy from the flame makes the electrons go to the excited state. This is when the electrons are in higher energy levels and have more energy.

C) As the electrons return to the ground state, they release electromagnetic energy.

B) The electromagnetic energy that is produced is in the form of light energy, this is the color we see.

F) The electrons in the excited state return to the ground state.

This sequence of events describes how the energy from the flame excites the electrons in the element, causing them to move to higher energy levels. As the electrons return to their ground state, they release energy in the form of light, which is what we see as the color of the fireworks.

The triple bond receives the lowest number because the numbering process begins at the end. Hence, 1-butyne is the compound's IUPAC designation.

What's the purpose of butyne?

It is a specialized gas mixture used in the organic synthesis of substances and in the calibration of instruments; it has no distinctive industrial function. Butyne has two isomers, which are two compounds that have the same chemical formula, but different connections between the atoms: 1-butyne and 2-butyne

It's either 1-butyne or butyne.

Broadly speaking, butyne is a molecule made up of two carbon atoms connected by a triple bond. a a to to ands mol. The triple bond in the molecule is between the first and second carbon atoms, as defined by the naming of organic compounds.

To know more about butyne visit:

https://brainly.com/question/3397503

#SPJ4

Saturated fatty acids

TiCl₄ + 2H₂O TiO₂ + 4HCl is the reaction's balanced chemical equation. The following equation may be used to compute the standard reaction free energy (G°): G° is equal to G°f (products) - G°f (reactants)

TiCl₄ + 2H₂O TiO₂ + 4HCl is the reaction's balanced chemical equation.

The following equation may be used to compute the standard reaction free energy (G°):

G° is equal to G°f (products) - G°f (reactants), where G°f is the typical free energy required to produce each chemical.

We obtain the following values for the standard free energy of formation: G° = (-944.4) + 2(-237.2) - (-763.2) - 4(-92.3) = -437.6 kJ/mol

As a result, the given chemical reaction's standard reaction free energy (G°) is -437.6 kJ/mol.

To put it another way, the calculation determines the energy difference between the reactants and products in the specified chemical process under ideal circumstances. The reaction is spontaneous and thermodynamically advantageous when G° is negative.

To know more about energy here:

https://brainly.com/question/1932868

#SPJ4