what is the most common type of chemical sedimentary rock?

Answer:

1degree celcius is my answer

Answer: Exothermic: combustion, condensation, neutralization. Endothermic: photosynthesis, evaporation, ionic dissociation of salts

Explanation:

The Lewis structures of SI₂ and NH₃ are attached in the images as attachments.

Lewis structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .

They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.

They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.

Learn more about Lewis structures,here:

https://brainly.com/question/4144781

#SPJ1

The items needed to run the spectrophotometry experiment are the  Spectrophotometer , Blank solution , Sample solution , Cuvette , Stir bar. The correct options are A, C, D, E, F.

The Spectrophotometry is the standard and the inexpensive technique to measure the light absorption or the amount of the chemicals in the solution. It uses the light beam which will passes through the sample, and the each compound in the solution will absorbs or it will transmits light over the  certain wavelength.

This technique is the powerful because the certain compounds will absorb the different wavelengths of the light at the different intensities. Blank solution , Sample solution , Cuvette , Stir bar are the otems used in the spectrophotometry experiment.

To learn more about Spectrophotometry here

https://brainly.com/question/21578855

#SPJ4

It is challenging to determine which molecules might be soluble in water without knowing the precise compounds in question. To forecast solubility, there are some generic rules that can be employed.

A substance's capacity to dissolve in a specific solvent, such as water, is referred to as being soluble in chemistry. A chemical that is soluble in a specific solvent can combine uniformly with the solvent to create a clear, transparent solution. The polarity of the solvent and the material, temperature, and pressure are only a few examples of the variables that might affect how soluble something is. Chemistry places a lot of emphasis on the notion of solubility because it affects numerous chemical processes and reactions as well as many substances' features and behaviour.

Learn more about soluble here:

https://brainly.com/question/15560070

#SPJ4

The likely magnitude of the equilibrium constant K is greater than 10^3, and answer (b) is the most appropriate choice.The equilibrium constant K for the combustion reaction 2H2(g) + O2(g) = 2H2O(g) is likely to be very large, indicating a strong preference for the products at equilibrium.

This is because the reaction involves the formation of strong covalent bonds between the hydrogen and oxygen atoms, releasing a large amount of energy in the form of heat and light. The combustion reaction also involves the conversion of two moles of hydrogen gas and one mole of oxygen gas into two moles of water vapor, which means that the number of moles of gas decreases, leading to a decrease in entropy. Despite this decrease in entropy, the exothermic nature of the reaction is likely to drive the equilibrium towards the products. Therefore, the likely magnitude of the equilibrium constant K is greater than 10^3, and answer (b) is the most appropriate choice.

Find out more about combustion reaction

brainly.com/question/14852040

#SPJ4

10%, 10%, 80% of Clay, Silt and Sand are the composition of the soil sample. Therefore, the correct option is option E.

The mixture of organic materials, minerals, gases, fluids, and living things that makes up soil—also alluded to as earth or dirt—supports life. Some scientific definitions differentiate between soil and dirt by limiting the former word to just displaced soil.

100 ml of water being poured through a soil sample. After the water has passed through the soil, 98 ml of water is measured in the collection tray below the sample. 10%, 10%, 80% of Clay, Silt and Sand are the composition of the soil sample.

Therefore, the correct option is option E.

To learn more about soil, here:

https://brainly.com/question/27588666

#SPJ1

Your question is incomplete but most probably your full question was,  

Directions: The following question(s) refer to the diagram below, which shows 100 ml of water being poured through a soil sample. After the water has passed through the soil, 98 ml of water is measured in the collection tray below the sample. Of the following, which is the most likely composition of the soil sample?

A. ClaySiltSand80%10%10%

B.ClaySiltSand50%40%10%

C. ClaySiltSand40%50%10%

D.ClaySiltSand30%40%30%

E.ClaySiltSand10%10%80%

Therefore, the density of the carbon dioxide at these conditions is 1.54 g/L, and the mass of carbon dioxide present is 4.61 g.

Pressure is defined as the amount of force per unit area. It is a measure of how much force is distributed over a given surface area. Pressure can be represented by the symbol P and is typically measured in units such as Pascals (Pa), pounds per square inch (psi), or atmospheres (atm). Pressure is a fundamental concept in physics and is involved in a wide range of phenomena, from the behavior of fluids to the operation of mechanical devices. For example, when a force is applied to a gas, the gas molecules collide with the walls of the container and exert a pressure on the walls. This pressure is proportional to the number of gas molecules, the temperature of the gas, and the volume of the container.

Here,

To calculate the density of the carbon dioxide, we can use the ideal gas law, which relates the pressure, volume, temperature, and amount of gas to each other:

PV = nRT

where P is the pressure, V is the volume, n is the amount of gas in moles, R is the universal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature to Kelvin by adding 273.15:

T = 20.0 °C + 273.15 = 293.15 K

Next, we can rearrange the ideal gas law to solve for the amount of gas:

n = PV/RT

We can use the given values for P, V, and T, and the value for R is 0.08206 L•atm/(mol•K), which we can convert to torr•L/(mol•K) by multiplying by 760 torr/atm:

n = (725 torr)(3.00 L)/(0.08206 L•atm/mol•K)(293.15 K) = 0.1049 mol

The molar mass of carbon dioxide is approximately 44.01 g/mol. To calculate the mass of the carbon dioxide, we can multiply the amount of gas by the molar mass:

mass = n × molar mass = 0.1049 mol × 44.01 g/mol = 4.61 g

Finally, we can calculate the density by dividing the mass by the volume:

density = mass/volume = 4.61 g/3.00 L = 1.54 g/L

To know more about pressure,

https://brainly.com/question/18431008

#SPJ1

Three C-H bonds, one C=O bond, one C-O bond, one O-H bond, and one C-C bond make up the Lewis structure of acetic acid ([tex]CH_3COOH[/tex]) (See Picture). There are two lone pairs on each oxygen atom.

Each carbon atom in this structure is linked to three other atoms, two of which are hydrogen and one of which is oxygen. Also joined to a hydrogen atom is the oxygen atom on the right side of the molecule. Together with a double bond with the carbon atom in the centre, the other oxygen atom is connected to the carbon atom on the left side of the molecule. The oxygen atom in the centre of the molecule, which is bound to the carbon atom, likewise has two lone pairs of electrons.

Acetic acid, often known as [tex]CH_3COOH[/tex], has the Lewis structure shown in the given picture(See Picture).

Learn more about Lewis structure here:

brainly.com/question/20300458

#SPJ4

the units for the rate constant, k, for a second-order reaction is:  

k = L. mol⁻¹. s⁻¹

correct option: a

A word used to describe the rate of a chemical reaction when the rate is proportional to the product of the concentrations (in moles) of two of the reactants, as well as the square of the molar concentration of such reactant if there is only one, is called as bi-molecular kinetics. Second-order reaction rates are inversely correlated with the square of a reactant's concentration or the product of the concentrations of two reactants.

Nitrogen dioxide creates nitrogen monoxide and oxygen as an example of a second-order process.

Correct option: a

To know more about rate constants refer to:

https://brainly.com/question/26127112

#SPJ1

Explanation:

A prism is a solid geometric figure with two identical parallel bases that are both polygons, and the lateral faces are parallelograms with pairs of opposite sides of equal length.

The formula that represents an unsaturated hydrocarbon is CnH₂n– 2 . Option B is correct.

Unsaturated hydrocarbons contain at least one carbon-carbon double or triple bond, which means they have fewer hydrogen atoms compared to saturated hydrocarbons with the same number of carbon atoms. The general formula for an alkene, which is a type of unsaturated hydrocarbon, is CnH₂n, while the general formula for an alkyne is CnH₂n– 2 .

Unsaturated hydrocarbons are more reactive than their saturated counterparts, and they can undergo addition reactions to form new compounds. They are also important in the synthesis of a variety of chemicals and materials, including plastics, synthetic rubber, and solvents.

Hence, B. CnH₂n– 2 is the correct option.

To know more about unsaturated hydrocarbon here

https://brainly.com/question/490531

#SPJ4

The value for the molar volume of an ideal gas at STP is very important with regard to stoichiometric calculations. The volume occupied by 176 g of C₃H₈ is 89.4 L.

The volume occupied by one mole of a substance at a given temperature and pressure is called its molar volume at that temperature and pressure. The molar volume at STP is 22.414 L.

At 0°C and 1 atm, 1 mole of any gas behaving ideally occupies a volume of 22.414 L.

The molar mass of C₃H₈ = 44.097 g/mol

The number of moles (n) is given as:

n = Given mass / Molar mass

n = 176 / 44.097 = 3.99 moles

The volume occupied = 3.99 × 22.414 = 89.43 L

Thus the volume occupied by 113 g of C₃H₈ is 89.4 L.

To know more about volume at STP, visit;

https://brainly.com/question/29796637

#SPJ9

Your question is incomplete, but most probably your full question was

What volume in liters at STP is occupied by 176 grams of propane, C3H₈?

Round answers to one decimal.

The electrophile that is used to make the acetophenone from the benzene is the CH₃CO⁺.

The Acetophenone is the carbonyl compound in which the the group called as the ketone group is attached directly to  the benzene ring. The catalyst that is used in the production of the acetophenone is the anhydrous aluminum chloride. This type of the reaction is a type of the electrophilic substitution reaction. The Electrophiles are the electron-deficient species and that are attracted to the electron - rich center. The electrophiles will accepts the electron pair.

The electrophile is CH₃CO⁺ that is used in the production of the acetophenone from benzene.

To learn more about electrophile here

https://brainly.com/question/30026567

#SPJ4

Answer:

B

Explanation:

It is sodium, Na in the periodic table.

Answer:

Ionic: Cation is named first followed by the anion. If it's an ionic compound with a transition metal, there are more than one possible ion. Molecular - named with the least electronegative ion first + prefixes are given to both ions to indicate number of atoms in each element.

Explanation:

Answer:

The molecular formula of the compound with an empirical formula of CH2 and a molar mass of 28 would be C2H4.

The hydrocarbons in the petroleum that are separated into the fractions is by the fractional distillation method.

The Petroleum will be separated into the fractions through the  process called as the fractional distillation. The  Petroleum is heated in  the distillation tower, and making the hydrocarbons will vaporize. The highest temperature is present at the bottom in the distillation tower, and  the lowest temperature is present at the top of the distillation tower.

Therefore at the different heights in the distillation tower, the different temperatures will be present. The vaporized hydrocarbons will rise through the tower and will condense as  the temperature will be decreases.

To learn more about hydrocarbons here

https://brainly.com/question/29361672

#SPJ4

The formula for chlorous acid is HClO2. Chlorous acid is a weak acid with the chemical formula HClO2.

It is an oxyacid, meaning that it contains hydrogen, oxygen, and another element, in this case, chlorine. Chlorous acid is a colorless, unstable, and highly reactive compound, and it can decompose to form other chlorinated species, such as chlorine dioxide (ClO2) and hydrochloric acid (HCl). Chlorous acid can be prepared by reacting chlorine dioxide with water or by adding acid to a chlorite salt. It is used as a bleaching agent, disinfectant, and herbicide. Although the acid is difficult to obtain in pure substance, the conjugate base, chlorite, derived from this acid is stable. One example of a salt of this anion is the well-known sodium chlorite. This and related salts are sometimes used in the production of chlorine dioxide.

Learn more about chlorous acid here:

https://brainly.com/question/15084224

#SPJ4

The correct statements about GPCR and/or G-proteins are: When an activated G-protein separates into the a subunit and the B/y dimer, only the a subunit initiates a transduction pathway. A subunit of G-protein has a nucleotide binding site which is occupied by GDP when the G-protein is in an inactive state. Option B and C is correct.

G-proteins are a family of proteins involved in transmitting signals from extracellular stimuli to intracellular effectors. They are activated by G protein-coupled receptors (GPCRs), which are integral membrane proteins that detect various signaling molecules such as hormones and neurotransmitters.

When a signaling molecule binds to a GPCR, the receptor changes conformation and interacts with a G protein, leading to the activation of the G protein.

To know more about G-proteins here

https://brainly.com/question/12578485

#SPJ4

--The given question is incomplete, the complete question is

"Identify the correct statements about GPCR and/or G-proteins. Choose all that apply. A) G-protein cannot interact productively with GPCR in the absence of ligand binding to the GPCR. B) When an activated G-protein separates into the a subunit and the B/y dimer, only the a subunit initiates a transduction pathway leading to a cellular response. C) The a subunit of a G-protein has a nucleotide binding site that is occupied by GDP when the G-protein is in an inactive state. D) An activated G-protein is a transmembrane protein complex."--

Hepatocytes convert ammonia to urea, which is eliminated more readily from the body. This is an anabolic process in action.

Anabolic processes are chemical events in which complex molecules are formed from simpler ones. This metabolic process of converting ammonia to urea is critical because it serves to regulate the quantity of nitrogen produced by the body.

Ammonia is a byproduct of protein metabolism that can be hazardous to cells if it builds up. Urea is far less harmful and is easily excreted from the body through urine. Hepatocytes in the liver are in charge of converting ammonia to urea.

Learn more about the hepatocytes at

https://brainly.com/question/28711715

#SPJ4

The enthalpy change of the reaction, given that the standard molar enthalpy of formation of benzene, C₆H₆ is 48.95 kJ/mol, is 97.9 KJ

From the question given above, we were told that the standard molar enthalpy of formation of benzene, C₆H₆ is 48.95 kJ/mol.

Thus, we can use the standard molar enthalpy change of benzene to determine the enthalpy change for the reaction as follow:

2C₆H₆ + 15O₂ -> 12CO₂ + 6H₂O

From the balanced equation above, 2 moles of benzene, C₆H₆ were used up in the reaction.

Thus, we can say that:

1 mole of benzene, C₆H₆ gave an enthalpy change of 48.95 KJ.

Therefore,

2 moles of benzene, C₆H₆ will result in an enthalpy change of = 2 × 48.95 = 97.9 KJ

Thus, the enthalpy change is 97.9 KJ

Learn more about enthalpy change:

https://brainly.com/question/24170335

#SPJ1

Molecules and compounds are both made up of atoms, but they have different definitions and characteristics. Examples of molecules include oxygen, water, whereas for NaCl is a compound.

Molecules are groups of two or more atoms that are chemically bonded together. Examples of molecules include oxygen, water, and carbon dioxide. Molecules can be made up of atoms of the same element or different elements.

Compounds are a type of molecule that are made up of two or more different elements that are chemically bonded together in a fixed ratio. Examples of compounds include sodium chloride, methane, and sucrose.

To know more about the molecules, here

brainly.com/question/14545678

#SPJ4

Answer:

Gravity has the potential to exert force on the girl because she has stored energy due to her position, and gravity can act on this energy.

Explanation:

Gravity is a fundamental force in the universe that attracts objects with mass to one another. The force of gravity is determined by the mass of the objects and the distance between them. The girl, being a massive object, is subject to the force of gravity due to the Earth's mass. Because the girl has mass, she is also attracted to the Earth by gravity. The potential for gravity to exert a force on the girl comes from the position of the girl relative to the Earth. The closer the girl is to the Earth, the stronger the force of gravity on her. This potential energy can be converted into kinetic energy if the girl falls towards the Earth, as the force of gravity accelerates her downward.

Answer:At STP, a mole of gas takes up 22.4 liters.

(This information can be deducted from ideal gas law)

So 15 liters correspond to x moles:

22.4 —- 1 mole

15 —- x

x = 0.67 moles

The complete combustion is the reaction:

CH4 (for example) + 2 O2 -> CO2 + 2 H2O

it is the same than

1/2 CH4 + O2 -> 1/2 CO2 + H2O

So the dioxide carbon producted will be 0.67/2 moles. Or, it will be 15/2 = 7.5 liters.

Notice that I used CH4 but I might used any organic compound instead. I used CH4 to be more pratical resulting 1 carbon atom in each side of the chemical equation.

Explanation:

All molecular structures have at least one imaginary frequency.

A molecule's vibrational frequencies are quantized, or can only take on specific discrete values, according to quantum physics. A molecule is said to be stiff if it contains fewer than three atoms because there are no degrees of freedom for vibration.

A molecule has degrees of freedom for vibration when it has three or more atoms, and it can absorb or emit energy in the form of photons that match these vibrational frequencies.

For becoming real, a molecule needs all its vibrational frequencies. or to match the molecule's true vibrational motions, in order to have a stable geometry.

Learn more about imaginary frequency:

https://brainly.com/question/30801917

#SPJ4

Answer:

3,338.24 and thats the answer

The process that would be directly affected by a substance that interrupts RNA polymerases is protein synthesis.

RNA polymerases are enzymes responsible for catalyzing the formation of RNA molecules from DNA templates during transcription. A substance that interrupts RNA polymerases would directly affect the transcription process, which is the synthesis of RNA from DNA.

Transcription is a fundamental process in gene expression, where information encoded in DNA is transferred to RNA for the synthesis of proteins.

Learn more about RNA polymerases at: https://brainly.com/question/10556531

#SPJ1