costs are the most important direct economic impact of increased UV radiation. The medical expenses for millions of additional cases of skin cancers and eye cataracts pose a challenge to health care systems, particularly in less developed countries.
Answer:
in the economy many people die die to skin cancer caused by UV (ultraviolet rays) because there is a massive hole in the ozone layer letting in the uv rays
Air masses can also be modified when lifted or forced to descend by topography. As an mP air mass from the Pacific Ocean moves over the northwest coast of the U.S., the mountains lift it. This causes the air to cool, increasing the relative humidity and leading to cloud formation and snowfall in the mountains. A CP air mass formed over the Greenland Plateau will descend as it moves off the high plateau, warming along the way. Topographic Lifting Homework. Unanswered The paragraph above describes the results of mP air flowing up the west side of a mountain in the Northwest United States. Based on what we learned in previous chapters, a rain shadow desert would form on the east side of the mountain. True or False?
The paragraph describes the movement of an MP (maritime polar) air mass from the Pacific Ocean over the northwest coast of the U.S., where it encounters mountains. This statement is true.
As the air mass is lifted over the mountains, it undergoes adiabatic cooling, which causes its temperature to decrease. This cooling process leads to an increase in relative humidity, as cooler air has a reduced capacity to hold moisture. The increased humidity, combined with the upward motion of the air, creates favorable conditions for cloud formation and precipitation.
On the west side of the mountains, where the air mass originates from, the lifting of the air and subsequent cooling result in ample precipitation, typically in the form of rain or snow. However, as the air mass continues to move over the mountain range and descends on the east side, it experiences adiabatic warming. The descending air warms and its relative humidity decreases, resulting in drier conditions.
This phenomenon is known as the rain shadow effect, where the mountain acts as a barrier, causing the air to release moisture on the windward side (west side) and creating a "shadow" of reduced precipitation on the leeward side (east side) of the mountain.
To learn more about mountains
https://brainly.com/question/17950058
#SPJ4
global albedo was _______ during times of cooler global climate when there was more land surface covered by ice.
Global albedo was higher during times of cooler global climate when there was more land surface covered by ice.
What is Global Albedo:During ice ages, when the Earth experienced cooler global climates and extensive ice coverage, the global albedo was generally higher compared to warmer periods. This is because the presence of ice and snow significantly increases the Earth's overall reflectivity.
Ice and snow have high albedo values, reflecting a substantial portion of incoming solar radiation back into space. Freshly fallen snow has an albedo that can approach 90%, meaning it reflects about 90% of the sunlight that hits it. This high reflectivity contributes to a cooling effect on the climate system.
The presence of extensive ice coverage during ice ages creates a positive feedback loop known as the ice-albedo feedback.
Higher global albedo during ice ages plays a crucial role in maintaining and intensifying the cooler climate conditions. It contributes to the persistence and growth of ice sheets, further reducing temperatures and establishing a feedback loop that sustains the ice age climate.
Know more about Global Albedo here:
https://brainly.com/question/31813877
#SPJ4
increasing global urbanization causes associated problems such as the formation of urban heat islands. (a) describe how urbanization leads to the formation of urban heat islands. (b) urban heat islands have been linked to a variety of environmental problems. (i) propose a reasonable solution that could help lower the temperature increases caused by urban heat islands
(a) Urbanization leads to the formation of urban heat islands due to several factors.
(b) Urban heat islands have been linked to environmental problems such as increased energy consumption, elevated air pollution levels, and compromised human health.
(a) The replacement of natural surfaces with impervious materials like concrete and asphalt reduces the area available for vegetation, which contributes to decreased evapotranspiration and reduced cooling effects.
Additionally, the construction of buildings and infrastructure absorbs and retains heat, leading to higher temperatures within urban areas. The concentration of human activities, energy consumption, and industrial processes in urban areas also contribute to increased heat production, further exacerbating the urban heat island effect.
(b) To help lower the temperature increases caused by urban heat islands, a reasonable solution is the implementation of green infrastructure. This includes the strategic planting of trees and vegetation, creation of green spaces, and use of reflective or cool materials for building surfaces. These measures can enhance evapotranspiration, provide shade, and mitigate heat absorption and radiation.
Additionally, implementing cool roof technologies and promoting energy-efficient building designs can reduce energy consumption and decrease the urban heat island effect. Green infrastructure not only helps to lower temperatures but also provides numerous co-benefits such as improved air quality, enhanced aesthetics, and increased resilience to climate change impacts.
To learn more about global urbanization, here
https://brainly.com/question/31610065
#SPJ4
In a typical month, the Musica Corporation receives 70 checks totaling $149,000. These are delayed five days on average. What is the average daily float
To calculate the average daily float, we need to determine the average delay or lag time for the checks received by Musica Corporation.
Given:
Number of checks received per month = 70
Total value of checks received per month = $149,000
Average delay or lag time = 5 days
The average daily float can be calculated using the following formula:
Average daily float = Total value of checks received per month / (Number of checks received per month * Average delay or lag time)
Substituting the given values, we have:
Average daily float = $149,000 / (70 * 5)
Calculating this expression, we find:
Average daily float ≈ $425.71
Therefore, the average daily float for Musica Corporation is approximately $425.71, considering that they receive 70 checks totaling $149,000 with an average delay of 5 days.
learn more about Corporation here
https://brainly.com/question/30029715
#SPJ11
a relatively new technology that has been very effective in identifying and mapping faults in areas with heavy weathering and thick vegetation (such as western oregon) is
Lidar, which stands for Light Detection and Ranging, is a relatively new technology that has proven to be highly effective in identifying and mapping faults in areas with heavy weathering and thick vegetation, such as western Oregon. Here option A is the correct answer.
Lidar works by emitting laser pulses and measuring the time it takes for the light to bounce back after hitting an object or the Earth's surface. This data is used to create precise three-dimensional maps of the terrain, even in areas with dense vegetation cover.
In the context of fault identification and mapping, Lidar can penetrate through vegetation and provide detailed elevation data, allowing researchers and geologists to detect subtle fault lines that may be hidden beneath thick layers of weathered material and plant growth. By accurately mapping fault systems, Lidar helps in understanding the geology and potential hazards in an area, aiding in the assessment of seismic risks and land-use planning.
Furthermore, Lidar data can be combined with other geological and geophysical datasets to create comprehensive fault models, facilitating the study of fault behavior, earthquake forecasting, and mitigation strategies.
To learn more about Lidar
https://brainly.com/question/29660999
#SPJ4
Complete question:
What is the name of the relatively new technology that has been very effective in identifying and mapping faults in areas with heavy weathering and thick vegetation (such as western Oregon)?
A) Lidar
B) Ground-penetrating radar
C) Synthetic Aperture Radar (SAR)
D) Hyperspectral imaging
Which of the following locations is an example of a fracture zone?
A. San Luis Obispo
B. Moneterey
C. Mendocino
D. Iceland
The location that is an example of a fracture zone is Mendocino. So, the correct answer is option C.
A fracture zone is a region where tectonic plates move past each other horizontally, creating a network of cracks in the Earth's crust. These areas are characterized by a series of small earthquakes and can also be marked by underwater mountain ranges.
Mendocino is located on the northern coast of California and is known for its active seismic activity due to the presence of the San Andreas Fault and the Mendocino Triple Junction, where the Pacific, North American, and Gorda plates meet.
Know more about Mendocino here:
https://brainly.com/question/30802535
#SPJ11
Governments in liberal democracies have been able to shape key political decisions. The most effective strategy for this has been carefully selecting the ideas and information that voters receive. long-term one-party rule.
The most effective strategy for this has been carefully selecting the ideas and information that voters receive.
Governments in liberal democracies have the power to shape key political decisions through various means. They are elected by the people and have the authority to enact policies, create laws, and make important decisions that impact the nation.
Governments can shape political decisions through the legislative process, where they propose and pass laws that reflect their agenda and priorities. They also have executive powers to implement and enforce policies.
Additionally, governments can influence political decisions through the appointment of officials, negotiation and diplomacy with other countries, and engaging with public opinion through democratic processes such as elections and public consultations.
Know more about Liberal Democracies here:
https://brainly.com/question/30167510
#SPJ4
The given question is incomplete. Hence, the complete question is:
Governments in liberal democracies have been able to shape key political decisions. The most effective strategy for this has been
carefully selecting the ideas and information that voters receive. long-term one-party rule.it does not actually have any community members as part of it.When Thomas negotiates and finalizes a contract with a software vendor who will provide an application package for his organization, _____. a. having a standard vendor contract reviewed by experienced members of the legal and purchasing departments is overkill b. he should recognize that the standard contract is written from the buyer's perspective and thus protects his company's interests c. less care in reviewing the contract is necessary if the vendor is modifying their standard software for Thomas's company d. he should clarify how the provider will ensure data privacy and handle discovery in the event of a lawsuit for a cloud solution
When Thomas negotiates and finalizes a contract with a software vendor who will provide an application package for his organization, he should clarify how the provider will ensure data privacy and handle discovery in the event of a lawsuit for a cloud solution.
Contracts with software vendors are crucial in establishing the rights, responsibilities, and expectations of both parties involved. It is important for Thomas to ensure that the contract addresses key considerations, particularly regarding data privacy and legal implications.
While options a, b, and c may have some validity in certain situations, they do not directly address the specific concern of data privacy and handling discovery in the event of a lawsuit for a cloud solution. These aspects are particularly important when dealing with cloud-based software solutions, as they involve the storage and processing of sensitive data.
To protect his company's interests and mitigate potential risks, Thomas should carefully review the contract terms related to data privacy and legal proceedings. This may include clauses on data protection, confidentiality, compliance with applicable laws and regulations, dispute resolution mechanisms, and procedures for handling discovery requests during legal proceedings.
By seeking clarification on these specific matters, Thomas can ensure that the software vendor has appropriate measures in place to safeguard data privacy and handle any legal challenges that may arise. This proactive approach can help mitigate potential risks and provide peace of mind to Thomas and his organization.
learn more about data privacy here
https://brainly.com/question/30474385
#SPJ11
TRUE/FALSE. people in southwest asia start to actively cultivate barley and wheat. the inhabitants of central europe adopt methods of agricultural production.
Around 9000 BC, people in southwest Asia start to actively cultivate barley and wheat.
Around 5500 BC, the inhabitants of central Europe adopt methods of agricultural production.
Hence, both the statements are True.
Around 9000 BC, cultivation practices involving the cultivation of barley and wheat were initiated by people in southwest Asia. This marked a significant shift from a hunter-gatherer lifestyle to settled farming communities, leading to the development of agriculture as a primary means of sustenance.
Around 5500 BC, the inhabitants of central Europe adopted agricultural production methods. This transition brought about changes in their lifestyle and economy, as they began to cultivate crops, rear livestock, and establish permanent settlements. The adoption of agriculture in central Europe facilitated the growth of sedentary societies and the development of more complex social structures, paving the way for the advancement of human civilization in the region.
Learn more about cultivation practices here:
https://brainly.com/question/31749926
#SPJ4
fill in the blank. a prominent feature of the mid- atlantic ridge is a very deep linear valley known as a(n) ________ valley.
An exceptionally deep linear valley known as a rift valley is one of the Mid-Atlantic Ridge's most noticeable features.
Rift valleys are long, narrow depressions that form along divergent plate boundaries, where tectonic plates are moving away from each other. The Mid-Atlantic Ridge itself is an underwater mountain range that runs through the Atlantic Ocean, extending from the Arctic Ocean to the Southern Ocean.
The rift valley along the Mid-Atlantic Ridge is created by the process of seafloor spreading. As the tectonic plates separate, magma rises to the surface, creating a new oceanic crust. The molten material pushes the existing crust apart, leading to the formation of a rift valley in the center. This valley is characterized by steep, parallel walls that descend to great depths.
The Mid-Atlantic Ridge's rift valley is known for its immense depth, reaching several kilometers below the surrounding seafloor. It showcases a variety of geological features, including volcanic activity, hydrothermal vents, and unique ecosystems that have adapted to extreme conditions.
To learn more about rift valley
https://brainly.com/question/19624324
#SPJ4
Rio is Brazil's capital of what?
Rio de Janeiro is not the capital of Brazil. The capital of Brazil is Brasília.
The altitude of polaris measured by an observer at the tropic of cancer is:.
The altitude of Polaris measured by an observer at the Tropic of Cancer is approximately 23.5 degrees.
The altitude of Polaris, the North Star, as measured by an observer at the Tropic of Cancer can be determined based on their latitude. The Tropic of Cancer is located approximately 23.5 degrees north of the equator.
Since Polaris is located very close to the North Celestial Pole, its altitude above the horizon is directly related to the observer's latitude. The altitude of Polaris is equal to the observer's latitude.
Therefore, for an observer at the Tropic of Cancer, which is approximately 23.5 degrees north latitude, the altitude of Polaris would be approximately 23.5 degrees above the horizon.
It is important to note that the altitude of Polaris will vary slightly throughout the night due to the Earth's rotation. However, the general rule remains that the altitude of Polaris above the horizon corresponds to the observer's latitude.
Observing Polaris can be helpful for navigation and determining one's approximate latitude, especially in the Northern Hemisphere. Its relatively fixed position in the sky makes it a valuable celestial reference point for mariners, hikers, and astronomers alike.
To learn more about Tropic of Cancer refer here:
https://brainly.com/question/15898952
#SPJ11
Conservators are responsible for ___________. Select all that apply. Group of answer choices analyzing techniques preservation analyzing context analyzing materials
Conservators are responsible for analyzing materials and preservation. They play an important role in the protection and preservation of cultural heritage, including artwork, historical documents, and artifacts. Conservators use various scientific techniques and tools to analyze the materials and condition of the objects, such as microscopy, X-rays, and chemical tests.
They also develop and implement preservation plans to prevent deterioration and damage to the objects, including proper handling, storage, and display. In addition, conservators analyze the context and history of the objects to gain a better understanding of their significance and cultural value. Overall, conservators play a critical role in ensuring that cultural heritage is preserved for future generations.
Know more about cultural value here:
https://brainly.com/question/31375471
#SPJ11
Tahlia is taking shorthand notes while conducting an observation. Later on, she will write out more in-depth observations based on these notes. What are the shorthand notes called
The shorthand notes that Tahlia is taking are typically called stenographic notes.
These notes are a way of quickly capturing information using a set of symbols or abbreviations that are designed to be efficient and easy to write. Stenographic notes are often used by professionals such as court reporters, journalists, and researchers who need to take down information quickly and accurately. While shorthand notes can be helpful for capturing important details in the moment, it's important to remember that they are not a substitute for more detailed observations or analysis. Later on, Tahlia will need to take the shorthand notes she has made and use them as a basis for more in-depth observations, taking the time to expand on the shorthand and fill in any missing details.
To know more about stenographic visit:
https://brainly.com/question/28781369
#SPJ11
Which is not true according to Peter Drucker a) Industry and market changes are a source of innovation b) Innovation may occur when there are incongruities in an industry c) Innovation proceeds based upon iterative design principles d) Innovation may be caused by demographic changes
c) Innovation proceeds based upon iterative design principles is not true according to Peter Drucker.
According to Peter Drucker, a renowned management consultant and author, innovation is a key driver of organizational success. He emphasized the importance of innovation in adapting to industry and market changes, addressing incongruities, and capitalizing on emerging opportunities.
a) Industry and market changes are a source of innovation: Drucker recognized that changes in industries and markets create new challenges and opportunities, which can drive innovation as organizations seek to adapt and stay competitive.
b) Innovation may occur when there are incongruities in an industry: Drucker believed that innovation often arises when there are discrepancies or inconsistencies within an industry or between existing products or services, creating a need for novel solutions.
d) Innovation may be caused by demographic changes: Drucker acknowledged that demographic shifts, such as changes in population size, age distribution, or consumer preferences, can stimulate innovation by creating new market demands or requiring organizations to adapt their offerings.
However, the statement "Innovation proceeds based upon iterative design principles" does not align with Drucker's views. While iterative design is a common approach in product development and improvement, Drucker emphasized the importance of systematic innovation and the need for organizations to continuously explore and experiment with new ideas rather than solely relying on iterative design principles. He believed in the need for proactive and intentional innovation efforts to drive organizational growth and success.
To learn more about Peter Drucker, here
https://brainly.com/question/26250766
#SPJ4
how much of california's water is dedicated by law to wetlands, the delta, and rivers?
Climate change is bringing serious impact on California’s water system. warm temperatures, shorter and intense wet seasons, volatile precipitation, and rising seas are signs of warning which may lead to more serious implications.
Under federal law Wild and scenic rivers get 31 percent, while other rivers are allocated with 9 percent of water to maintain environmental balance. Managed wetlands get 2 percent and deltas get about 7 percent.
The federal government and the state both operate a system of reservoirs, aqueducts and canals that capture rain and snow melt and sell that water to farms and towns. The California-run State Water Project draws most of its water from Lake Oroville and ships most of it to farms and cities.
Learn more about California's Water System: https://brainly.com/question/31393144
#SPJ4
why are wildfires important when considering mass-wasting events
Wildfires play a crucial role when considering mass-wasting events due to their impact on the stability of slopes and the increased likelihood of subsequent mass wasting.
Wildfires can have both immediate and long-term effects on the occurrence and magnitude of mass-wasting events. Firstly, during a wildfire, the intense heat can alter the physical and chemical properties of soil and rocks, reducing their cohesion and stability.
High temperatures can cause thermal expansion, leading to the cracking and fracturing of rocks, weakening the overall slope stability. Additionally, the loss of vegetation cover due to wildfires exposes the bare soil, increasing the susceptibility of slopes to erosion and mass wasting by rainfall and runoff.
Furthermore, wildfires can change the hydrological characteristics of an area. The heat from the fire can create a water-repellent layer, known as hydrophobic soil, which inhibits water infiltration into the ground. As a result, when rainfall occurs after a fire, the water can accumulate on the surface, leading to increased runoff and a higher potential for debris flows and landslides.
To learn more about wildfires
https://brainly.com/question/15568736
#SPJ4
If a firm is producing a quantity where marginal revenue exceeds marginal costs, the firm should ____ existing levels of production in order to ____.
If a firm is producing a quantity where marginal revenue exceeds marginal costs, the firm should increase existing levels of production in order to maximize profit.
Marginal revenue (MR) refers to the additional revenue generated by producing and selling one more unit of a product. Marginal cost (MC), on the other hand, represents the additional cost incurred by producing one more unit. The relationship between marginal revenue and marginal cost is a crucial factor in determining a firm's profit-maximizing level of production.
When marginal revenue exceeds marginal cost (MR > MC), it indicates that the firm can generate more revenue from selling an additional unit than the cost of producing that unit. In this situation, increasing production and selling more units would lead to an increase in total revenue and contribute positively to the firm's overall profitability.
By expanding production and selling more units, the firm can capture the additional revenue generated by each unit, thus increasing its total revenue. This allows the firm to maximize its profit by continuing to produce as long as the marginal revenue from each additional unit exceeds the marginal cost.
It is important to note that the profit-maximizing level of production may vary depending on market conditions, demand elasticity, and other factors. Firms should continuously assess the relationship between marginal revenue and marginal cost to make informed decisions regarding production levels and pricing strategies.
learn more about marginal revenue here
https://brainly.com/question/30236294
#SPJ11
examine the age structure of germany in the figure below. which of the following statementsis not supported by the age structure?a) there will be large positive population growth in the near future.b) there are more women than men between the ages of 60 and 70.c) there will be small negative population growth in the near future.d) there are more people between the ages of 25 to 39 then between 0 and 14.
c) There will be small negative population growth in the near future.
Based on the age structure shown in the figure, it is evident that statement (c) is not supported. The age structure depicts a larger proportion of the population in the older age groups, particularly the 60 and above category. This indicates an aging population, which implies that the number of people reaching retirement age and beyond is increasing. In such a scenario, it is more likely to experience population decline or slow population growth rather than small negative population growth in the near future.
Statements (a), (b), and (d) are supported by the age structure. Statement (a) aligns with the higher proportion of younger individuals, indicating the potential for positive population growth as they reach reproductive age. Statement (b) is supported by the fact that there is a larger number of women compared to men in the 60-70 age group. Statement (d) is also supported as the age structure shows a larger number of people in the 25-39 age group compared to the 0-14 age group.
To learn more about population growth, here
https://brainly.com/question/18613862
#SPJ4
A hypothesis of the significance of different slope elements for human activities
Human activities play a crucial role in slope modification and stability.
of the different terms in the ipat equation, which term(s) are expected to have the least impact slowing down future co2 emissions?
Affluence (A) is expected to have the least impact slowing down future CO2 emissions
The IPAT equation is defined as:
Impact (I) = Population (P) × Affluence (A) × Technology (T)
In this equation:
- Population (P) refers to the number of people on Earth.
- Affluence (A) represents the average consumption per person.
- Technology (T) refers to the CO2 emissions per unit of consumption.
To determine which term(s) are expected to have the least impact slowing down future CO2 emissions, let's analyze each term:
1. Population (P): Slowing population growth could help reduce emissions, but since the global population is still expected to grow, this term may not have the least impact.
2. Affluence (A): Increasing affluence often leads to higher consumption and resource use, which could lead to more CO2 emissions. Reducing consumption may help, but it's not the easiest approach to implement.
3. Technology (T): Advancements in technology can significantly reduce the CO2 emissions per unit of consumption. This term has the greatest potential to slow down future CO2 emissions through cleaner technologies and more efficient energy use.
In conclusion, out of the three terms in the IPAT equation, Affluence (A) is expected to have the least impact slowing down future CO2 emissions, as it is challenging to reduce consumption on a global scale. The most effective approach would be focusing on improving Technology (T) to decrease emissions per unit of consumption.
To learn more about IPAT
https://brainly.com/question/13473875
#SPJ11
please help for a lot of points
The surface area of the missing faces is 72m², the length is 6m, and the breadth is 12m.
Given information,
Total surface area = 216 m²
Each surface area of 2 blocks = 24 m²
Each surface area of 2 blocks = 12 m²
The surface area of the two missing blocks is the same.
Total surface area = Sum of the surface area of all blocks
216m² = 12m² + 12m² + 24m² + 24m² + A + A
216 = 72 + 2A
216 - 72 = 2A
2A = 144
A = 144/2
A = 72m²
Area of rectangle = Length × Breadth
72 = Length × 12
Length = 72/12
Length = 6 m
Therefore, the surface area of the missing faces is 72m², the length is 6m, and the breadth is 12m.
Learn more about the surface area, here:
https://brainly.com/question/29298005
#SPJ1
the national oceanic and atmospheric administration is the federal agency focused on the conditions of the oceans and atmosphere. the ammount of daylight can be approximated by
The amount of daylight can be approximated by the equation of time.
The equation of time is a mathematical calculation that represents the discrepancy between the mean solar time and the apparent solar time. It takes into account various factors such as the tilt of the Earth's axis, the elliptical orbit of the Earth around the Sun, and the axial precession.
By using the equation of time, scientists and astronomers can determine the variation in the length of daylight throughout the year. It helps in predicting sunrise and sunset times accurately and understanding the changes in daylight duration as the seasons progress.
Therefore, the equation of time is used to approximate the amount of daylight and is relevant to the work of the National Oceanic and Atmospheric Administration in studying and monitoring the Earth's atmosphere and oceans.
Learn more about daylight here:
https://brainly.com/question/2849776
#SPJ11
hypotheIn a certain supermarket, a sample of 60 customers who used a self-service checkout lane averaged 5.2 minutes of checkout time, with a standard deviation of 3.1 minutes. A sample of 72 customers who used a cashier averaged 6.1 minutes with a standard deviation of 2.8 a. b. 11. 12. Page 437 a. b. c. d. e. 13. minutes. Can you conclude that the mean checkout time is less for people who use the selfservice lane
a) We cannot conclude that the mean checkout time is less for people who use the self-service lane
b) NO, we cannot conclude that if everyone used the self-service lane, that the mean checkout time would decrease
We have the information available from the question:
A sample of 60 customers.
standard deviation of 3.1 minutes
A sample of 72 customers who used a cashier averaged 6.1 minutes
standard deviation of 2.8
Now, According to the question:
I sample :
Sample size n1 = 60
Sample average = x bar = 5.2 minutes
Standard deviation sample = s1 = 3.1 minutes
II sample:
n2 = 72
y bar = 6.1
s2 = 2.8 minutes
Mean difference = -0.9
Standard error for difference = [tex]\sqrt{\frac{s_1^2}{n_1} +\frac{s_2^2}{n_2} }[/tex]
Plug all the values in above formula.
We get the:
Standard error for difference = 0.5187
t statistic = mean diff/se = -1.735
p value = 0.0848
Since p >0.05 we accept null hypothesis that there is no difference between the two averages
Conclusion:
a) We cannot conclude that the mean checkout time is less for people who use the self-service lane
b) NO, we cannot conclude that if everyone used the self-service lane, that the mean checkout time would decrease.
Learn more about Standard deviation at:
https://brainly.com/question/13498201
#SPJ4
the image shows photographs of sandstones taken with a petrographic microscope (a special type of microscope used by geologists). match the description of sorting with the appropriate specimen.
Specimen A represents well-sorted sandstone, while Specimen B represents poorly-sorted sandstone.
In the given image, you can observe two sandstone specimens taken with a petrographic microscope. To match the description of sorting with the appropriate specimen, we need to assess the grain size distribution in each sample.
Well-sorted sandstones have uniform grain sizes, while poorly-sorted sandstones display a mix of grain sizes. In Specimen A, you can see a consistent grain size distribution, indicating it is well-sorted.
In Specimen B, the grain sizes are varied and inconsistent, suggesting it is poorly-sorted. Hence, Specimen A is well-sorted and Specimen B is poorly-sorted sandstone.
To know more about petrographic microscope click on below link:
https://brainly.com/question/30657101#
#SPJ11
Complete question:
the image shows photographs of sandstones taken with a petrographic microscope (a special type of microscope used by geologists). match the description of sorting with the appropriate specimen.
which of the following were involved in bringing the deep batholithic rocks to the surface
a. uplift of rock tens of millions of years
b. hot spot that formed
c. a continent - continent
d. the recent restarting of subduction
The uplift of rock tens of millions of years ago was likely involved in bringing the deep batholithic rocks to the surface. As tectonic plates move and collide, the pressure and heat can cause rocks to uplift and eventually be exposed at the surface. So, the correct answer is option A.
It is also possible that a hot spot that formed under the area could have played a role in bringing the rocks to the surface. Hot spots are areas where magma rises from deep within the Earth and melts through the crust. This can cause volcanoes to form and also lead to uplift of the surrounding rock.
It is less likely that a continent-continent collision or recent restarting of subduction would have played a significant role in bringing the deep batholithic rocks to the surface. Continent-continent collisions can cause uplift and mountain building, but this is typically on a much larger scale than the exposure of batholithic rocks. Similarly, subduction typically leads to the sinking of crustal material rather than uplift.
Know more about Continent-continent collisions here:
https://brainly.com/question/5162204
#SPJ11
when exposed to carbonic acid in rainwater, limestone can dissolve, deteriorate and weaken. what affect does this process have on the landforms?
The dissolution of limestone by carbonic acid can lead to formation of karst topography, decreased elevation, and the creation of valleys and ridges.
Limestone is a kind of sedimentary rock that is composed mostly of calcium carbonate. When exposed to carbonic acid in rainwater, it dissolves, deteriorates, and weakens over time. The process has an effect on the landforms in the following ways.
Formation of karst topography: Carbonic acid in rainwater causes limestone to dissolve, creating karst topography. This can result in caves, sinkholes, and underground drainage systems to form. This process can also alter the land surface by creating pits and fissures in the landscape. The process of karst topography occurs slowly over time and can result in the creation of unique and beautiful geological features.Decreased elevation: The dissolving of limestone results in the lowering of the land surface, decreasing the elevation. This can lead to the formation of valleys, canyons, and other depressions in the landscape. The process of dissolving can also result in the formation of ridges, which are high points in the landscape that remain intact while the surrounding area erodes away.Over time, the dissolution of limestone by carbonic acid can alter the landscape significantly. The formation of karst topography, the lowering of the land surface, and the creation of valleys and ridges are just some of the ways that this process can affect landforms.
Learn more about Limestone:
https://brainly.com/question/1874892
#SPJ11
100% of the students who were unable to be accepted to medical school grew up eating vegetables with dinner every night. Why is this not a good reason stop eating vegetables
The statement you provided is an example of a correlation without a causal relationship. While it may be true that all the students who were unable to be accepted to medical school grew up eating vegetables with dinner every night, it does not necessarily mean that eating vegetables caused them to be unsuccessful in their medical school applications.
Correlation means that two variables are related or occur together, but it does not imply that one variable directly causes the other. In this case, there could be other factors at play that contribute to the students' inability to get accepted into medical school, such as their academic performance, extracurricular activities, personal statements, or interview skills. It would be incorrect to conclude that eating vegetables is the reason for their lack of success in medical school admissions.
Eating vegetables is generally considered beneficial for overall health due to their nutritional content. They provide essential vitamins, minerals, fiber, and other beneficial compounds that contribute to a balanced diet and can have positive long-term health effects. It's important to base dietary choices on a variety of scientific evidence, including research studies and dietary guidelines, rather than drawing conclusions from a single correlation that lacks a proven causal relationship.
When evaluating claims or making decisions, it is crucial to consider a wide range of factors, evidence, and expert opinions to make informed choices rather than relying on isolated correlations that may not provide a complete picture
To know more about vegetables here
https://brainly.com/question/5025184
#SPJ4
the least desirable lot, bordered on the side by the backs of lots that front on another street is a(n):
The least desirable lot, bordered on the side by the backs of lots that front on another street is a a. key lot.
An area of property known as a "key lot" is one that is tucked away from other lots and often has access to a public road via a small strip of land. The least attractive key lot is surrounded on the side by the backs of lots that front on another street, however their desirability might vary based on their features and location. Key lots typically have a distinctive configuration with the majority of the lot behind adjacent houses.
Due to minimal or obscured street frontage, it may not be as enticing to prospective purchasers who may value visibility and accessibility. It may have less privacy than other areas because it is surrounded by properties whose backs face another street. Windows, balconies, or other buildings belonging to inhabitants on adjacent lots might face the key property, which could damage their feeling of privacy.
Read more about street on:
https://brainly.com/question/4838415
#SPJ4
Complete Question:
The least desirable lot, bordered on the side by the backs of lots that front on another street is a(n):
a. key lot.
b. interior lot.
c. corner lot.
what kind of information do glacial striations reveal about past glaciers?
Glacial striation reveals the direction that the glacier was flowing or moving.
What is Glacial Striation?Glacial striations, also known as glacial scratches or ice scratches, are long, parallel grooves or scratches found on the bedrock or exposed surfaces of rocks that have been eroded by glaciers. They are a geological feature resulting from the movement of glaciers across the landscape.
Glacial striations are formed when rocks embedded in the base of a glacier scrape and grind against the underlying bedrock as the glacier advances. The direction of the striations corresponds to the direction of ice flow, providing evidence of the glacier's past movement.
Glacial striations are valuable indicators for reconstructing past glacial movements and understanding the history of glaciation in a particular region. They provide evidence of the extent and direction of ice flow, as well as the erosive power of glaciers.
Know more about Glacial Striation here:
https://brainly.com/question/25591324
#SPJ4