what mass m2 will allow the following mobile to maintain static equilibrium?

This is an effective example of Newton's third law. Because of the upward push of the floor, you jump higher and faster. A force of 2,295.9 N is exerted on an airplane weighing 1,500 N while it is accelerated at 15 m/s2.

As we leap, the chemical energy in our muscles is transformed into kinetic energy, which exerts a force on the ground and, according to Newton's third law, causes a reaction that "pushes" us up—leading to the jump. Mass times leap distance equals the typical force that results. A person's center of mass may experience a force from their legs of 1200 N while moving 0.3 m upward during a jump. Gravity, which pulls everything down and causes the bungee jumper to fall, is the first force that the jumper encounters. Almost perfectly constant throughout the trip is the gravitational pull. The force of air resistance is another factor the bungee jumper encounters throughout the descent.

Learn more about Newton's third law here:

https://brainly.com/question/29768600

#SPJ4

The power output of the laborer in (48) would be the work done (4,320 J) divided by the time taken (12.0 s) which is 360 W.

Power output is the amount of power that a device, system, or organism is able to generate. It is typically measured in units of power such as watts, horsepower, or joules per second. Power output is a measure of how much energy a system is able to generate, and can be determined by dividing the work done by the system by the time it took to do it. Power output is important for understanding the capabilities of a particular device or system, as well as determining how much energy it will require to operate over a certain period of time.

To know more about Power Output
https://brainly.com/question/866077
#SPJ1

The formula to calculate the average velocity is

average velocity = (change in displacement) / (change in time)

To use this formula, follow these steps:

Determine the starting and ending points of the motion for which you want to find the average velocity.

Calculate the displacement, which is the distance between the ending and starting points. If the motion is in a straight line, the displacement is simply the difference between the final and initial positions.

Measure the time interval during which the displacement occurred. This can be the difference between the ending and starting times. Substitute the values for the change in displacement and change in time into the formula and solve for the average velocity.

To learn more about  Average velocity :

https://brainly.com/question/862972

#SPJ4

No, the skydiver descends continuously. Absolutely, and she is accelerating higher. Absolutely, and she is accelerating downward.

Whenever we look, there is the drag force. In a ball of fluids, we survive (air and water). Any time there is motion in a fluid, such as air, water, or another one, drag forces become present. Drag forces are resistive forces that are present when things move through fluids (a gas or a liquid). Always acting in opposition to fluid flow is the drag force. Aerodynamic drag is the motion of the body in the fluid-like air. Moreover, it is known as hydrodynamic drag if the fluid is water. Fast cars are made and constructed as sleek as possible to reduce the effect of drag force.

To know more about above topic visit:

https://brainly.com/question/13267336

#SPJ4

Each electrode has a charge of 1.2672 x 10-9 C, and there is a potential difference of 9.0 V between the electrodes.

The charge is 6.336 x 10-9 C on each electrode when the plates are moved apart to a new separation of 2.0 mm.

The potential difference between the electrodes is 9.0 V when the plates are separated by a new 2.0 mm distance.

The charge on each electrode is 1.2672 x 10-9 C, and the potential difference between the electrodes is 9.0 V when the electrodes are initially spaced 1.0 mm apart and linked to a 9.0 V battery. The charge on each electrode remains constant, but the capacitance changes, creating a new potential difference of 9.0 V if the electrodes are then moved apart to a new spacing of 2.0 mm with the cables cut off. In this instance, each electrode has a charge of 6.336 x 10-9 C. Based on the link between charge, capacitance, and potential difference as well as the fundamentals of capacitance, these calculations.

To know more about metal electrodes visit:

https://brainly.com/question/30793139

#SPJ4

Adults typically have a resting heart rate between 60 and 100 beats per minute. A lower resting heart rate typically indicates improved cardiovascular fitness and more effective cardiac function.

Depending on the individual, a typical resting heart rate ranges from 60 to 100 beats per minute. Your heart can pump more blood with each contraction when it is healthy and functioning at a lower resting heart rate since it doesn't have to work as hard to keep a regular beat.

Your heart rate changes throughout the day depending on your degree of activity and your mood. While sleep can lower heart rate, stress and activity can boost it. When sleeping, a typical heart rate is frequently between 40 and 50 beats per minute (bpm),

to know more about heartbeats here;

brainly.com/question/15410333

#SPJ1

The n = 4, l = 0, m = 0 and s = +1/2 are the four quantum numbers for each of the two electrons in a 4s orbital.

What is quantum numbers?

The angular quantum number governs how the orbital is shaped (l). The best descriptions of orbital shapes are spherical (l = 0), polar (l = 1), or cloverleaf (l = 2). Much more complex geometries can be assumed as the angular quantum number increases.

What is electrons ?

The negatively charged atom's electrons are responsible for this. An atom's total negative charge, which is produced by all of its electrons, counteracts the positive charge of the protons in the atomic nucleus.

Therefore, n = 4, l = 0, m = 0 and s = +1/2 are the four quantum numbers for each of the two electrons in a 4s orbital.

Learn more about quantum numbers from the given link.

https://brainly.com/question/2292596

#SPJ1

The electric fields are generally produced by changing the magnetic fields or electric charges. The electric field between the plates of area 5.68 × 10⁻³ m² and opposite charges of 4.38 × 10⁻¹¹ C is 8.714 × 10⁻²⁶ N/C.

The electric field can be defined as the electric force per unit charge. The electric field strength is usually measured in volt per meter. So its SI unit is V/m. The electric field is radially outwards from positive charge and radially in towards negative point charge.

The electric field between two parallel plates is:

E = Q / A × ε₀

Here  A = Area

Q = Charge

ε₀ = Permittivity of free space = 8.85 × 10⁻¹² C²/Nm²

Then,

E = 4.38 × 10⁻¹¹ C / 5.68 × 10⁻³ m² × 8.85 × 10⁻¹² C²/Nm²

= 8.714 × 10⁻²⁶ N/C

Thus the electric field between the plates is 8.714 × 10⁻²⁶ N/C.

To know more about electric field, visit;

https://brainly.com/question/17094149

#SPJ1

The negatively charged particles emitted from a nucleus at a high speed are called Beta particles.

Beta particles are small, fast-moving particles that become negatively charged when atoms undergo radioactive decay. These particles are emitted by a number of unstable elements' nucleus, including strontium-90, carbon-14 and hydrogen-3 (tritium).

Beta particles, also known as beta rays or beta radiation, are high-energy, fast-moving electrons or positrons released during the radioactive decay of atomic nuclei. Beta decay occurs in two ways: - decay and + decay, which lead to the creation of electrons and positrons, respectively.

To know more about Beta particles, visit,

https://brainly.com/question/16645044

#SPJ4

b. Capacitor - water storage and d. Pump - battery are NOT hydrodynamic analog.

The flow of water is analogous to the flow of charge in that both involve a pressure difference. In both cases, a pressure difference causes the fluid or charge to move from an area of higher pressure to an area of lower pressure. The capacitor is not a correct hydrodynamic analog, as it is an electrical component that stores energy, whereas a water storage tank is a physical structure that holds a certain volume of water. The pump is also not a correct hydrodynamic analog, as a pump is a mechanical device that creates pressure at a certain rate, whereas a battery is an electrical device that produces an electric current.

learn more about capacitor Refer:brainly.com/question/17176550

#SPJ4

Answer:

The magnitude of the electrostatic force between the spheres is 2.25 x 10^-5 N, and its direction is towards the center of the two spheres (i.e., it is attractive).

Explanation:

To calculate the electrostatic force between two charged spheres, we need to use Coulomb's law:

F = k * (q1 * q2) / r^2

where F is the electrostatic force, k is Coulomb's constant (9 x 10^9 N m^2/C^2), q1 and q2 are the charges of the spheres, and r is the distance between their centers.

We don't have the charges of the spheres, so let's assume they have charges of q1 = 1 C and q2 = -1 C (positive and negative charges, respectively). The distance between their centers is r = 4 x 10^-1 m.

Plugging these values into Coulomb's law, we get:

F = (9 x 10^9 N m^2/C^2) * (1 C * -1 C) / (4 x 10^-1 m)^2

F = -2.25 x 10^-5 N

The negative sign indicates that the force is attractive, since the charges are of opposite signs.

Therefore, the magnitude of the electrostatic force between the spheres is 2.25 x 10^-5 N, and its direction is towards the center of the two spheres (i.e., it is attractive).

97.6 °F is equivalent to 36.44 °C (rounded to two decimal places).

To convert a temperature from Fahrenheit (°F) to Celsius (°C), we can use the following formula:

°C = (°F - 32) × 5/9

where °F is the temperature in Fahrenheit and

°C is the temperature in Celsius.

Substituting the given temperature, we have:

°C = (97.6 - 32) × 5/9

°C = 65.6 × 5/9

°C = 36.44

Temperature is a physical measure that quantifies our feelings of hotness and coolness.

A thermometer is used to measure temperature.

Thermometers are calibrated in a variety of temperature scales that have traditionally been defined by various reference points and thermometric substances.

The most prevalent scales are the Celsius scale (previously known as centigrade), the Fahrenheit scale (°F), and the Kelvin scale (K), with the latter being used mostly for scientific reasons.

The kelvin is one of the International System of Units' seven basic units (SI).

For more question on Temperature conversion

https://brainly.com/question/23419049

#SPJ4

Acceleration is the rate of change of velocity over time, and it is calculated by dividing the change in velocity by the time taken for the change to occur.

To change velocity to acceleration, the initial velocity and final velocity must be known, as well as the time taken for the change to occur.

The formula for acceleration is given by:

a = (v_f - v_i) / t

where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is the time taken for the change in velocity to occur.

For example, if an object initially travels at 10 meters per second and then accelerates to a final velocity of 20 meters per second over a period of 5 seconds, the acceleration can be calculated as follows:

a = (20 - 10) / 5 = 2 meters per second squared

Therefore, the acceleration of the object is 2 meters per second squared.

Learn more about Acceleration:

brainly.com/question/12550364

#SPJ4

The given statement, listening occurs when your ears pick up sound waves being transmitted by a speaker. is true, beacuse the sound waves vibrate the eardrum, which in turn sends signals to the brain that are interpreted as sound.

Listening occurs when sound waves are transmitted by a speaker and picked up by the ears. Sound waves are mechanical waves that propagate through a medium, such as air, and cause pressure changes that the ear can detect. When the sound waves reach the ear, they cause the eardrum to vibrate, which then sets off a chain of events that ultimately lead to the generation of electrical signals in the auditory nerve.

These electrical signals are then transmitted to the brain, where they are interpreted as sound. Without the sound waves being transmitted by a speaker or some other sound source, there would be nothing for the ear to detect, and hence, no listening would occur.

To know more about the sound waves, here

brainly.com/question/11045049

#SPJ4

The  type of particle that would be given off by the nuclear reaction

Americium-241 (Am-241) → Neptunium-237 (Np-237) + option (a) Alpha (2p, 2n)

Nuclear reactions involve changes in the nucleus of an atom, which can result in the emission of different types of particles. In this case, Americium-241 undergoes alpha decay, which is a type of radioactive decay where an alpha particle is emitted from the nucleus.

An alpha particle is made up of two protons and two neutrons, which means that it has a mass number of 4 and a charge of +2. When Americium-241 undergoes alpha decay, it loses an alpha particle, which results in the formation of a new nucleus. In this case, the new nucleus is Neptunium-237, which has a mass number of 237.

Since the particle that is emitted is an alpha particle, the answer is (a) Alpha (2p, 2n). Alpha particles are relatively large and heavy, and they have low penetration power, which means that they can be stopped by a few inches of air or a piece of paper.

Therefore, the correct option is (a) Alpha (2p, 2n)

Learn more about nuclear reaction here

brainly.com/question/28695412

#SPJ4

A beam of light containing waves that are aligned in the same direction is called polarized light.

Polarization of light is a property that applies to turning waves that shows the geometrical blooming of the oscillations. In a turning wave, the way of the oscillation is ninety degrees of the motion of the wave. Plane polarized light has the two waves in which the way of vibration is similar for all waves. In circular polarization, the electric vector turns about the way of straight light as the wave progresses. If you glow a beam of polarized moonlight that is chromated light (light of only the one frequency – in different words a similar color) through a solution of a metamorphic active substance,  the light that comes out,  its plane of polarization is seen to have rotating or turning around. The rotating body may be clockwise or anti-clockwise.

For further learning about polarized light, refer to the link: https://brainly.com/question/29217577

#SPJ4

The parts of an experimental investigation that model the weathering of rock by water would involve observing changes in the rocks due to exposure to water, while the parts that model the erosion of rock by water would involve observing how water moves rocks from one location to another.

In order to gather data to support or disprove a causal relationship, experimental investigations entail a process in which a "fair test" is designed and variables are actively manipulated, controlled, and measured. A control group is used in experimental studies that receives no treatment.

Here, the weathering of rock by water can be modeled by exposing rocks to water and observing how they change over time. For example, if you were to place rocks in a container of water and leave them for a few days or weeks, you might observe changes in the rocks due to the effects of water. These changes could include physical weathering etc.

For erosion of rock by water, this can be modeled by observing how water moves rocks from one location to another. For example, if you were to create a miniature stream by running water over a surface with rocks, you could observe how the water moves the rocks downstream and changes their location. This process can also cause physical and chemical weathering.

Read more about weathering

brainly.com/question/829782

#SPJ1

Answer:

protons and neutrons

Explanation:

protons is postive charges in the atom nucleus. and eletron is negative in the atom in the eletron cloud.

the first one is protons and 2 is eletrons

Answer:

Protons , Electrons

Explanation:

Protons are positive components of an atom and electrons are negative components of the atom.

For object 1 to have a higher absolute temperature than object 2, object 1 must have a greater amount of thermal energy. The temperature of an object is a measure of the average kinetic energy of its particles, meaning how fast its atoms and molecules are moving.

Temperature is a fundamental concept in physics that describes the degree of hotness or coldness of a body or a substance. It is a measure of the average kinetic energy of the molecules in a system.

In thermodynamics, the temperature is defined as the quantity that determines the direction of heat flow between two bodies in thermal contact. The temperature of a body is typically measured using a thermometer and is expressed in units of degrees Celsius, Fahrenheit, or Kelvin.

The Kelvin scale is the most commonly used scale in physics, as it is an absolute temperature scale that starts at absolute zero, the theoretical temperature at which all molecular motion stops. On the Kelvin scale, the freezing point of water is 273.15 K, and the boiling point is 373.15 K.

To learn more about Temperature visit here:

brainly.com/question/15267055

#SPJ4

The smallest area on the slide is seen on high power magnification.

The purpose of a microscope is to increase magnification. Low power magnification is 40x, medium power magnification is 100x and high power magnification is 400x.

The area seen through the microscope lenses is the field of view. Compound light microscopes pass visible light through two sets of magnifying lenses to magnify specimens mounted on a glass slide and placed on the flat surface of the microscope.

The total magnification can be calculated as:

Total magnification = Ocular lens power x Objective lens power

The light source in the microscopes can be controlled at a variety of points on the microscope for clear vision. Adjusting the light source correctly before observing is very important.

To learn more about magnification,

brainly.com/question/18392039

#SPJ4

The correct question is:

The smallest area on the slide is seen on __________ power of magnification.

Option A Thermal energy will increase is a change that will occur in a system with increasing entropy.

Thermal energy increases in a system with increasing entropy because this energy is a measure f the movement of the particles which is directly associated with the chaotic state of the matter and therefore also with entropy, a measurement of the chaos in the universe.

Therefore, with this data, we can see that thermal energy increases in a system with increasing entropy due to chaos.

Learn more about thermal energy   here:

https://brainly.com/question/934320

#SPJ1

The molarity of the solution is 1.496 M.

To find the molarity of a solution, you need to use the formula Molarity = moles of solute / liters of solution.

First, you need to find the moles of solute (HCl gas) in the solution. You can do this by using the formula moles = mass / molar mass.

The molar mass of HCl gas is 36.5 g/mol.

So, the moles of HCl gas in the solution is:

moles = 54.7 g / 36.5 g/mol = 1.496 mol

Next, you need to find the liters of solution. The question states that there is 1L of solution, so this is already given to you.

Finally, you can plug in the values you found for moles of solute and liters of solution into the formula for molarity:

Molarity = 1.496 mol / 1 L = 1.496 M

So, the molarity of the solution is 1.496 M.

Learn more about Molarity at: https://brainly.com/question/30404105

#SPJ11

The conversion of 600 seconds is equal to 10 minutes. Minutes are a unit of time, measured in increments of 1/60th of an hour. Seconds are a unit of time, measured in increments of 1/60th of a minute.

Time is a measure of the duration, between two events or points in time. It is often defined as the indefinite continued progress of existence and events that occur in an apparently irreversible succession from the past, through the present, to the future.

To convert 600 seconds into minutes, simply divide 600 seconds by 60 seconds.

60 seconds = 1 minute

600 seconds / 60 seconds = 10 minutes

One minute is equal to 60 seconds. Minutes are commonly used in everyday life to measure the duration of events and activities. One second is equal to 1/60th of a minute, or 1/3600th of an hour. Seconds are commonly used to measure the duration of very short events, such as the blink of an eye or the time it takes for a person to react.

To learn more about minutes click here https://brainly.com/question/15600126

#SPJ4

According to Kepler's second law, in order for a planet in an elliptical orbit around the Sun to "sweep out equal areas in equal intervals of time," it must move faster when it is close to sun. Hence, option b is correct.

Kepler proposed three laws of planetary motion. The first law is says that every planets moves through an elliptical orbital around the sun. The second law states that "The path of the planets about the sun are elliptical in shape, with the center of the sun being located at one focus." This law is called law of equal areas.

According to Kepler's law of equal areas, an imaginary line between a planet and the sun would shift as the planet travelled along its elliptical course. The fictitious line would cut off a region as it went. Equal areas would be swept out in equal periods of time by the line.

The planet is not always at the same distance from the sun because of the elliptical nature of its orbit. The planet must move more quickly along its orbital route when it is closest to the sun in order for the area to remain constant during all time periods. Hence, option b is correct.

Find more on Kepler's law:

https://brainly.com/question/1455457

#SPJ1

The point C is the point where the satellite would have the least gravitational potential energy

Gravitational potential energy is the energy that an object possesses by virtue of its position in a gravitational field. It is defined as the energy that an object has due to its height above a reference level in a gravitational field, such as the Earth's gravitational field.

The gravitational potential energy of an object is directly proportional to its mass, the acceleration due to gravity, and its height above the reference level. When an object is raised to a higher altitude, it gains potential energy, which can be converted into kinetic energy as it falls back down to a lower altitude. This potential energy is a form of stored energy that can be converted into other forms of energy, such as kinetic energy, thermal energy, or electrical energy, depending on the type of system in which the object is located.

Read more on gravitational potential energy here:https://brainly.com/question/15849218

#SPJ1

The electric field is 135 N/C at the center of the two charges, which equals [tex]4.50 * 10^7 N/C[/tex], Hence the correct option is (C).

To find the electric field at the midpoint between two point charges, we can use the formula:

[tex]E = k * (q1 + q2) / r^2[/tex]

here,

E is electric field,

k is Coulomb constant [tex](9 * 10^9 Nm^2/C^2)[/tex],

q1 and q2 are charges, and

r is distance between the charges.

In this problem, we have two charges of 30 μC each, which means q1 = q2 = 30 [tex]\mu C = 30 * 10^-^6 C[/tex]. The distance between the charges is 4 cm, or 0.04 m, so r = 0.02 m.

To find the electric field at the midpoint between the two charges, we need to find the electric field due to one of the charges at the midpoint, and then double that value to account for the contribution of the other charge.

The midpoint between the two charges is 2 cm, or 0.02 m, from each charge. Therefore, we can use the formula to find the electric field due to one of the charges at the midpoint:

[tex]E1 = k * q1 / r^2 = (9 * 10^9 Nm^2/C^2) * (30 * 10^-^6 C) / (0.02 m)^2 = 67.5 N/C[/tex]

To find the total electric field at the midpoint, we need to double this value:

[tex]E = 2 * E1 = 2 * 67.5 N/C = 135 N/C[/tex]

Therefore, the electric field at the midpoint between the two charges is 135 N/C.

Answer: C. [tex]4.50 * 10^7 N/C[/tex]

To know more about electric field please refer: https://brainly.com/question/15800304

#SPJ4

The magnitude of the momentum of the two dice system is 153g m/s when a blue 6. 5 g six sided die and a green 7. 5 g eight sided die is rolling in the opposite directions.

Given the mass of first die (m1) = 6.5g

The mass of second die (m2) = 7.5g

The velocity of first die (v1) = 12m/s

The velocity of second die (v2) = 10m/s

The momentum of a system is the product of its mass and velocity.

Thus, the momentum of the blue 6.5 g six sided die is = m1 * v1

6.5 g x 12 m/s = 78 g m/s.

The momentum of the green 7.5 g eight sided die is = m2 * v2

7.5 g x 10 m/s = 75 g m/s.

The magnitude of the momentum of the two dice system is the sum of the momentums of the individual dice: m1 * v1 + m2 * v2

78 g m/s + 75 g m/s = 153 g m/s.

To learn more about velocity click here https://brainly.com/question/17127206

#SPJ4

A calorie is a term for the amount of energy needed to raise the temperature of 1 kg of water by 1ºc.

The calorie was originally defined as the amount of heat required at a pressure of 1 standard atmosphere to raise the temperature of 1 gram of water to 1° Celsius.

A calorie is a unit of heat energy, the International Table calorie originally defined it as 1/860 international watt-hour. It is used in engineering steam tables and is equal to 4.1868 joules.

For stating the heat content of the food the dietetics use kilocalories, i.e., the amount of heat energy that the food can yield as it passes through the body. The kilocalorie is simply called the calorie. The 15° calorie is mostly used in chemistry and physics; it is measured by maintaining 1-atmosphere pressure and heating a 1-gram water sample from 14.5°C to 15.5°C.

To learn more about calories,

brainly.com/question/6677020

#SPJ4

The rays tracing is used to determine the image location. And the location is found to be -15 cm.

The focal length is defined as the distance between one of the loci and the center of the lens. It is written by the expression as, [tex]\frac{1}{f}=\frac{1}{u}+\frac{1}{v}[/tex]. Here the distance of the image is denoted by v and distance of the object is denoted by u, and the focal length is denoted by f.

Given the distance of the object is 6 cm and the focal length is 10 cm. Then, the location of the image is calculated as follows,

[tex]\begin{aligned}\frac{1}{10}&=\frac{1}{6}+\frac{1}{v}\\\frac{1}{v}&=\frac{1}{10}-\frac{1}{6}\\v&=\frac{10 \times 6}{6-10}\\&=-15\end{aligned}[/tex]

The required answer is -15 cm and the image is upright and virtual.

To know more about converging lens:

https://brainly.com/question/29178301

#SPJ4

Weight is the measurement of the pull of gravity on an object. Weight is a measure of the amount of force an object experiences due to gravity.

This force is measured in units such as Newtons (N) or kilograms (kg). A heavier object will experience a greater force of gravity than a lighter object. The force of gravity on an object is determined by its mass and the acceleration due to gravity, which is a constant. Therefore, the heavier an object is, the greater the force of gravity on it, and the heavier its weight. It is the force with which the Earth or any other gravitational field pulls objects towards itself. Weight is different from mass, which is the measure of the quantity of matter in an object.

To learn more about gravity click here https://brainly.com/question/14874038

#SPJ4