The type of plot that can be used to determine λ max of a solution is Absorbance vs wavelength.
The correct option is C.
What is the plot of Absorbance vs wavelength?The plot of absorbance vs wavelength is called an absorption spectrum or an absorbance spectrum.
In this plot, the x-axis represents the wavelength of light, usually in nanometers (nm), and the y-axis represents the absorbance of the sample at that particular wavelength. The absorbance is a measure of how much light is absorbed by the sample at a specific wavelength.
The absorption spectrum is used to identify the wavelengths at which a substance absorbs light and can be used to determine the identity or concentration of the substance. The pattern of peaks and troughs in the absorption spectrum is unique to each substance, making it a useful tool in analytical chemistry and biochemistry.
Learn more about absorbance and wavelength at: https://brainly.com/question/28178230
#SPJ1
Identify the items needed to run a spectrophotometry experiment. Select one or more:A. SpectrophotometerB. hot plateC. blank solutionD. sample solutionsE. cuvetteF. stir bar
The items needed to run the spectrophotometry experiment are the Spectrophotometer , Blank solution , Sample solution , Cuvette , Stir bar. The correct options are A, C, D, E, F.
The Spectrophotometry is the standard and the inexpensive technique to measure the light absorption or the amount of the chemicals in the solution. It uses the light beam which will passes through the sample, and the each compound in the solution will absorbs or it will transmits light over the certain wavelength.
This technique is the powerful because the certain compounds will absorb the different wavelengths of the light at the different intensities. Blank solution , Sample solution , Cuvette , Stir bar are the otems used in the spectrophotometry experiment.
To learn more about Spectrophotometry here
https://brainly.com/question/21578855
#SPJ4
when potassium chloride is exposed to a flame, the light given off is the result of
When potassium chloride is exposed to a flame, the light given off is the result of atomic emission.
When a compound is heated, the energy is absorbed by the atoms or ions in the compound, causing them to become excited and jump to higher energy levels. As the atoms or ions return to their original energy levels, they release the excess energy in the form of light. This phenomenon is known as atomic emission.
In the case of potassium chloride, the energy absorbed by the atoms causes them to emit light in the visible spectrum, which produces a characteristic violet color. This process is commonly used in flame tests to identify the presence of specific elements or ions in a sample.
To know more about the potassium chloride, here
brainly.com/question/1388701
#SPJ4
How does gravity have the potential to exert force on the girl?
Answer:
Gravity has the potential to exert force on the girl because she has stored energy due to her position, and gravity can act on this energy.
Explanation:
Gravity is a fundamental force in the universe that attracts objects with mass to one another. The force of gravity is determined by the mass of the objects and the distance between them. The girl, being a massive object, is subject to the force of gravity due to the Earth's mass. Because the girl has mass, she is also attracted to the Earth by gravity. The potential for gravity to exert a force on the girl comes from the position of the girl relative to the Earth. The closer the girl is to the Earth, the stronger the force of gravity on her. This potential energy can be converted into kinetic energy if the girl falls towards the Earth, as the force of gravity accelerates her downward.
Benzene is a minor component of gasoline. The standard molar enthalpy of formation of benzene C6H6() is 48.95 kJ/mol. For the balanced reaction equation of benzene use:
2C6H6(I) +1502 --> 12CO2 + 6H₂O.
Benzene is a liquid, but all the other chemicals in this reaction are gases. What is the enthalpy change of this reaction in kJ?
The enthalpy change of the reaction, given that the standard molar enthalpy of formation of benzene, C₆H₆ is 48.95 kJ/mol, is 97.9 KJ
How do I determine the enthalpy change for the reaction?From the question given above, we were told that the standard molar enthalpy of formation of benzene, C₆H₆ is 48.95 kJ/mol.
Thus, we can use the standard molar enthalpy change of benzene to determine the enthalpy change for the reaction as follow:
2C₆H₆ + 15O₂ -> 12CO₂ + 6H₂O
From the balanced equation above, 2 moles of benzene, C₆H₆ were used up in the reaction.
Thus, we can say that:
1 mole of benzene, C₆H₆ gave an enthalpy change of 48.95 KJ.
Therefore,
2 moles of benzene, C₆H₆ will result in an enthalpy change of = 2 × 48.95 = 97.9 KJ
Thus, the enthalpy change is 97.9 KJ
Learn more about enthalpy change:
https://brainly.com/question/24170335
#SPJ1
what is brass melting point?
Depending on the alloy's composition, brass has a melting point that ranges from 900°C to 940°C (1652°F to 1724°F).
According on the alloy's composition, brass's melting point might change. Copper, zinc, and occasionally other metals are combined to make the alloy known as brass, which has certain properties. Brass typically melts between 900°C and 940°C (1652°F and 1724°F), depending on the specific alloy. The precise melting point of a given brass alloy is, however, influenced by the ratios of copper and zinc in the alloy, as well as by any additional metals that might be present. Brass's melting point may be impacted by the inclusion of other metals. Brass's melting point, for instance, can be lowered when lead is added, while aluminium increases it when added.
learn more about Brass here:
brainly.com/question/30346534
#SPJ4
From the following items, which is closest in size to one mole of gas at stp?
At STP, a mole of pure gas is closest in size to a marble. As a tiny, solid material, a gram of gas at the STP is considerably smaller than a marble. D is the correct response.
At Standard Pressure and Temperature, 22.4 L of any gas will be required to hold 1 mole (STP). The Ideal Gas Law and a balanced chemical equation can be used to determine the amount or mass of gas consumed or created in a chemical process. In other words, the gas that has the greatest number of molecules of a certain gas at a given temperature will occupy the largest volume.
Learn more about STP
brainly.com/question/29356493
#SPJ4
Question: From the following items, which is closest in size to one mole of gas at STP?
A) A car
B) An elephant
C) A microwave
D) A marble
for an enzyme that follows michaelis-menton kinetics, km is equal to
For an enzyme that follows Michaelis-Menten kinetics, Km (the Michaelis constant) is equal to the substrate concentration at which the reaction rate is half of its maximum value.
Mathematically, Km is defined as the substrate concentration at which the initial reaction velocity is equal to one-half of the maximum reaction velocity (Vmax) of the enzyme.
In other words, Km is a measure of the affinity of the enzyme for its substrate. Enzymes with a lower Km have a higher affinity for their substrate, meaning that they can effectively bind and catalyze the reaction at lower substrate concentrations.
On the other hand, enzymes with a higher Km have a lower affinity for their substrate and require higher substrate concentrations to achieve the same reaction rate.
To know more about Michaelis-Menten kinetics here
https://brainly.com/question/29361713
#SPJ4
Balance the chemical
equation
Mg(s)
0, (g)
MgO (s)
Identify type of reaction
The balanced chemical equation for the reaction between magnesium (Mg) and oxygen (O2) to form magnesium oxide (MgO) is:
2Mg (s) + O2 (g) → 2MgO (s)
In this equation, there are 2 atoms of magnesium and 2 molecules of oxygen on both sides of the equation, which means the equation is balanced.
This is an example of a synthesis reaction, where two or more substances combine to form a new compound. In this case, magnesium and oxygen react to form magnesium oxide. The reaction is exothermic, which means that it releases heat. This reaction is commonly used in the production of magnesium oxide, which is a useful material in various industrial applications, such as refractory linings in furnaces and kilns.
Learn more about chemical equation:
brainly.com/question/30087623
#SPJ4
Balance the chemical equation Mg (s) + O2 (g) → MgO (s) and identify type of reaction.
The balanced chemical equation for the formation of magnesium oxide (MgO) from the interaction of magnesium (Mg) and oxygen (O2) is 2Mg (s) + O2 (g) (s).
As there are two magnesium atoms and two oxygen molecules on either side of the equation in this case, the equation is balanced.
This is an illustration of a synthesis reaction, in which two or more chemicals come together to create a brand-new compound. As a result of this reaction, magnesium and oxygen produce magnesium oxide. Because the process is exothermic, heat is given off. Magnesium oxide is a result of this reaction that is frequently utilised in a variety of industrial applications, such as refractory linings for furnaces and kilns. Chemical symbols are used in chemical equations to represent what happens during a chemical reaction.
learn more about chemicals here:
https://brainly.com/question/29240183
#SPJ4
Balance the chemical equation Mg (s) + O2 (g) → MgO (s) and identify type of reaction.
How much water, in grams, can be made from 3.26 × 1024 hydrogen molecule
Answer:
3,338.24 and thats the answer
Question
What volume in liters is occupied by 176 grams of propane, C3Hg?
Round answers to one decimal.
The value for the molar volume of an ideal gas at STP is very important with regard to stoichiometric calculations. The volume occupied by 176 g of C₃H₈ is 89.4 L.
What is molar volume?The volume occupied by one mole of a substance at a given temperature and pressure is called its molar volume at that temperature and pressure. The molar volume at STP is 22.414 L.
At 0°C and 1 atm, 1 mole of any gas behaving ideally occupies a volume of 22.414 L.
The molar mass of C₃H₈ = 44.097 g/mol
The number of moles (n) is given as:
n = Given mass / Molar mass
n = 176 / 44.097 = 3.99 moles
The volume occupied = 3.99 × 22.414 = 89.43 L
Thus the volume occupied by 113 g of C₃H₈ is 89.4 L.
To know more about volume at STP, visit;
https://brainly.com/question/29796637
#SPJ9
Your question is incomplete, but most probably your full question was
What volume in liters at STP is occupied by 176 grams of propane, C3H₈?
Round answers to one decimal.
What intermolecular forces are present in pure samples of both CH₃CH₂OH and CH₃CH₂NH₂?
A) Dispersion forces, dipole-dipole forces, and hydrogen bonding.
B) Dipole-dipole forces only.
C) Dipole-dipole forces and hydrogen bonding.
D) Dispersion forces and dipole-dipole forces
In pure samples of both CH3CH2OH and CH3CH2NH2, differences, dipole-dipole forces, or intermolecular hydrogen bonding forces all exist.
The correct answer is A
Why do you use the term "hydrogen bonding"?A hydrogen atom that is sandwiched between two other atoms and has a high affinity to electrons interacts with them to form a link that is stronger that
What guidelines apply to hydrogen bonds?For hydrogen bonds to form, two conditions must be met. Hydrogen Bonding Has to Meet Two Conditions: A electronegative atom is linked to hydrogen in the first molecule (N,O,F). On a tiny, very electronegative atom in the second molecule, there is a single pair of electrons.
To know more about hydrogen bonding visit:
https://brainly.com/question/16854739
#SPJ4
A sample of carbon dioxide is held in a 3.00 L container at a temperature of 20.0 °C
and a pressure of 725 torr. What is the density of the carbon dioxide given these conditions? What mass of carbon dioxide is present?
Therefore, the density of the carbon dioxide at these conditions is 1.54 g/L, and the mass of carbon dioxide present is 4.61 g.
What is pressure?Pressure is defined as the amount of force per unit area. It is a measure of how much force is distributed over a given surface area. Pressure can be represented by the symbol P and is typically measured in units such as Pascals (Pa), pounds per square inch (psi), or atmospheres (atm). Pressure is a fundamental concept in physics and is involved in a wide range of phenomena, from the behavior of fluids to the operation of mechanical devices. For example, when a force is applied to a gas, the gas molecules collide with the walls of the container and exert a pressure on the walls. This pressure is proportional to the number of gas molecules, the temperature of the gas, and the volume of the container.
Here,
To calculate the density of the carbon dioxide, we can use the ideal gas law, which relates the pressure, volume, temperature, and amount of gas to each other:
PV = nRT
where P is the pressure, V is the volume, n is the amount of gas in moles, R is the universal gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature to Kelvin by adding 273.15:
T = 20.0 °C + 273.15 = 293.15 K
Next, we can rearrange the ideal gas law to solve for the amount of gas:
n = PV/RT
We can use the given values for P, V, and T, and the value for R is 0.08206 L•atm/(mol•K), which we can convert to torr•L/(mol•K) by multiplying by 760 torr/atm:
n = (725 torr)(3.00 L)/(0.08206 L•atm/mol•K)(293.15 K) = 0.1049 mol
The molar mass of carbon dioxide is approximately 44.01 g/mol. To calculate the mass of the carbon dioxide, we can multiply the amount of gas by the molar mass:
mass = n × molar mass = 0.1049 mol × 44.01 g/mol = 4.61 g
Finally, we can calculate the density by dividing the mass by the volume:
density = mass/volume = 4.61 g/3.00 L = 1.54 g/L
To know more about pressure,
https://brainly.com/question/18431008
#SPJ1
mass is conserved in a reaction if the choose... of the initial reactant masses equals the choose... of the masses of choose...
According to the rule of conservation of mass, neither physical nor chemical processes may create or destroy mass inside an isolated system. A chemical reaction requires an equal mass balance between the reactants and products in accordance with the rule of conservation of mass.
How does chemistry define a reactant?A chemical reaction's reactants are the substances that take part in it. A chemical reaction is the term used to describe how atoms, which are the basic elements that make up matter, reorganize themselves to create new combinations. Raw materials are known as reactants when they interact.
What are a reactant and a product?On the left side of the equation, reactants are described as initial materials. The equation's right-hand side is where the products, which represent the outcome of the reaction, are listed.
To know more about reactant visit:
https://brainly.com/question/17096236
#SPJ1
Examine the elements of noble gas and discuss TWO (2) properties of this type of element.
Any one of the 7 chemical elements that compose Group 18 (VIIIa) of a periodic table is referred to as a noble gas. The noble gases generally inflammable, tasteless, colorless, and odorless.
Explain about the noble gas and its properties?Due to their full valence shells (octets), which render them incredibly nonreactive, the noble gases (Group 18), which are found at the far right of a periodic table, were formerly known as the "inert gases."
Properties of the noble gas:
Noble gases are low chemically reactive, odorless, colourless, nonflammable, and monotonic gases.Noble gases are exceedingly stable and uncommon to form chemical connections since they have minimal inclination to receive or lose electrons, thanks to the complete valence electron shells of such atoms. There are exceptions to the rule that noble gases need not typically combine with other substances to form compounds.Xe can combine with fluoride or oxide to produce compounds.To know more about the noble gas, here
https://brainly.com/question/1984010
#SPJ1
a scientist mixes 0.02 g of a strong base in 83 ml of water and obtains a ph of 12. he then realizes that he forgot to label the container and forgot what base he added. what is the most likely the identity of this base? a) LiOH. b) NaOH. c) RbOH. d) KOH
LiOH is the most likely identity of the base added. Option A is correct.
The pH of 12 indicates that the solution is strongly basic. To determine the identity of the base added, we can compare the amount of base added to the volume of water and use the pKa values of the conjugate acids to estimate which base is most likely to produce a pH of 12.
LiOH: 6.94 + 16.00 + 1.01 =23.95 g/mol
NaOH: 22.99 + 16.00 + 1.01 = 40.00 g/mol
RbOH: 85.47 + 16.00 + 1.01 = 102.48 g/mol
KOH: 39.10 + 16.00 + 1.01 = 56.11 g/mol
Amount of base added = 0.02 g / molar mass
LiOH: 0.02 g / 23.95 g/mol = 0.000835 mol
NaOH: 0.02 g / 40.00 g/mol = 0.0005 mol
RbOH: 0.02 g / 102.48 g/mol = 0.000195 mol
KOH: 0.02 g / 56.11 g/mol = 0.000356 mol
Next, we can calculate the concentration of hydroxide ions (OH-) in the solution using the pH:
pH = 14 - pOH
12 = 14 - pOH
pOH = 2
[OH⁻] =[tex]10^{-pOH}[/tex] = 0.01 M
Using the concentration of hydroxide ions and the amount of base added, we can calculate the concentration of the base in the solution:
[OH⁻] = [base]
0.01 M = [base] / (83 mL / 1000) L
[base] = 0.00083 mol/L
Finally, we can compare the concentration of the base to the amount of base added and estimate which base is most likely to produce a pH of 12. The pKa values of the conjugate acids of the bases are:
LiOH: pKa = 10.76
NaOH: pKa = 14.00
RbOH: pKa = 13.62
KOH: pKa = 13.25
From the calculations, we see that the concentration of the base in the solution is highest for LiOH, which has the lowest molar mass among the options. Additionally, the pKa value of LiOH is closest to the pH of 12 obtained, which suggests that LiOH is the most likely identity of the base added.
Hence, A. LiOH is the correct option.
To know more about base here
https://brainly.com/question/27089588
#SPJ4
nvm i don’t need helppp
Answer:
Ok It's all right.hahahhahah
What is Osmosis, Diffusion, Tyndall effect and Brownian Motion???
Osmosis: Osmosis is the movement of water molecules from a solution with a high concentration of water molecules to a solution with a lower concentration of water molecules, through a cell's partially permeable membrane.
Diffusion: The process of movement of a substance (solid, liquid, or gas) from the region of higher concentration to the region of lower concentration so as to spread uniformly is called diffusion.
Tyndall effect: The Tyndall effect is the phenomenon in which the particles in a colloid scatter the beams of light that are directed at them.
or the scattering of a beam of light by a medium containing small suspended particles.
Brownian motion: Brownian motion refers to the random movement displayed by small particles that are suspended in fluids.
What do
Electrons help form
And
Neutrons help keep
what 1-bromobutane undergoes dehydrohalogenation by an elimination reaction when heated in the presence of base?
When 1-bromobutane undergoes dehydrohalogenation by an elimination reaction when heated in the presence of base, the organic product formed is 1- butene.
Dehydrohalogenation is defined as a reaction in which a hydrogen atom and a halogen atom are removed from adjacent atoms in a molecule forming an alkene or an alkyne. When this is reacted with strong base such as hydroxide ion, cyclohexyl chloride suffers dehydrohalogenation by a concerted E2 reaction mechanism. An elimination reaction is defined as a type of organic reaction in which two substituents are removed from a molecule in either a one or two step mechanism. The one step mechanism involved is known as the E2 reaction and the two-step mechanism is known as the E1 reaction. When 1-bromobutane undergoes dehydrohalogenation in the presence of a base it undergo elimination reaction.
To learn more about Dehydrohalogenation
https://brainly.com/question/13947468
#SPJ4
The correct question is,
1-bromobutane undergoes dehydrohalogenation by an elimination reaction when heated in the presence of base. what is the identity of the organic product?
The mass of a certain substance is 17. 5 kg. The density of the substance is 1. 71 g/ml. Determine the volume (in liters) of the substance
The volume of the substance is approximately 10.20468 liters.
Volume is the three-dimensional area that a material occupies or that is encircled by a surface. The cubic metre is the common unit of volume in the International System of Units (SI) (m3). The litre (L) is the volume unit used in the metric system.
First, we need to convert the mass to grams since the density is given in grams per milliliter:
17.5 kg = 17,500 g
Then, we can use the formula:
Density = mass / volume
to solve for the volume:
volume = mass / density
volume = [tex]17,500 g / 1.71 g/ml[/tex]
volume = 10,204.68 ml
Finally, we can convert milliliters to liters by dividing by 1000:
volume =[tex]10,204.68 ml / 1000 ml/liter[/tex]
volume = 10.20468 liters (rounded to 5 decimal places)
Therefore, the volume of the substance is approximately 10.20468 liters.
for such more question on density
https://brainly.com/question/1842374
#SPJ4
PLS HELP A single atom of an element has 11 protons, 11 electrons, and 12 neutrons. Which element is it?
A. V
B. Na
C. Mg
D. Se
Answer:
B
Explanation:
It is sodium, Na in the periodic table.
hepatocytes convert ammonia to urea which is more easily excreted from the body. this is an example of blank______.
Hepatocytes convert ammonia to urea, which is eliminated more readily from the body. This is an anabolic process in action.
Anabolic processes are chemical events in which complex molecules are formed from simpler ones. This metabolic process of converting ammonia to urea is critical because it serves to regulate the quantity of nitrogen produced by the body.
Ammonia is a byproduct of protein metabolism that can be hazardous to cells if it builds up. Urea is far less harmful and is easily excreted from the body through urine. Hepatocytes in the liver are in charge of converting ammonia to urea.
Learn more about the hepatocytes at
https://brainly.com/question/28711715
#SPJ4
Which element has the electron configuration 1s22s22p63s23p64s^3ds? A) V B) Cr C) Mo D) Mn E) No element has this configuration
Answer:
A
Explanation:
is has the configuration because it does
what electron energy is required to obtain the diffraction pattern for a surface with crystal spacing of 4.0 å?
The incident electron beam must have enough energy to overcome the interatomic interactions holding the atoms in place in the crystal lattice in order to produce a diffraction pattern for a surface with crystal spacing of 4.0.
The Bragg equation specifies the minimal energy needed for an electron with a de Broglie wavelength of to diffract off a crystal lattice with spacing d: We can change the equation 2d sin(n) = n to: h/p = h/square (2meV)
we discover that 2d sin() = n h / sqrt (2meV)
When we solve for V, we obtain: V = h2 / (2me * 2)
The electron's mass, m, is equal to 9.11 x 10-31 kg, and its charge, e, is equal to 1.60 x 10-19 C. By substituting these values for the given crystal spacing, d = 4.0 = 4.0 x 10-10 m, and assuming that n = 1 (the first-order diffraction peak), and = 90° (the maximum diffraction), we obtain: = 2d /
Therefore,For a surface with a crystal spacing of 4.0, the minimal electron energy needed to produce the diffraction pattern is roughly 41.9 electron volts (eV).
Learn more about electron here:
https://brainly.com/question/10031096
#SPJ4
A scientist mixes 0.02 g of a strong monoprotic base in 83ml of water and obtains a pH of 12 . He then realizes that he forgot to label the container and forgot what base he added. What is the most likely the identity of thisr base? LiOH NaOH RbOH KOH
Here we have to first determine the value of pOH from the given value of pH and have to obtain the concentration of hydroxide ion. The base will be LiOH. The correct option is A.
What is pH?The pH of a solution is defined as the negative logarithm of hydronium ion concentration in moles per litre. Mathematically it is given as:
pH = -log [H₃O⁺]
We have the relation, pH + pOH = 14
Then pOH = 14 - pH = 14 - 12 = 2
[OH⁻] = -log [pOH]
= -log (2)
= 10⁻² M
= 0.01 M
The molar mass of base is:
[OH⁻] = Mass of the base × 1000 / Molar mass × volume
0.01 = 0.02 × 1000 / 0.01 × 83
= 24 mol / gm
Thus LiOH has the molar mass of 24 mol / gm.
Thus the correct option is A.
To know more about pH, visit;
https://brainly.com/question/27945512
#SPJ1
Your question is incomplete, but most probably your full question was:
A scientist mixes 0.02 g of a strong monoprotic base in 83ml of water and obtains a pH of 12 . He then realizes that he forgot to label the container and forgot what base he added. What is the most likely the identity of thisr base?
A. LiOH
B. NaOH
C. RbOH
D. KOH
Which of the following is most likely a characteristic of sulfur?
A-metallic
B-good conductor of heat
C-inert
D-solid at room temperature
Which of the pairs of amino acids can form a salt bridge at physiological pH?aspartic acid and histidineglutamic acid and aspartic acidtwo cysteinesarginine and tyrosinelysine and glutamic acid
The pair of amino acids which can form a salt bridge at physiological pH is glutamic acid and aspartic acid.
What are amino acids?Amino acids are defined as the substances which are considered to be the monomers of proteins.Every amino acid has the same structure consisting of a central carbon which is bonded to an amino group , carboxyl group and a hydrogen.
Each amino acid also has another atom or a group of atoms bonded to the alpha carbon which are also known as the R group or the variable group of the side chain.There are 20 common amino acids present in natural proteins and each amino acid has the same backbone.
Learn more about amino acids,here:
https://brainly.com/question/15687833
#SPJ1
how are the hydrocarbons in petroleum separated into fractions
The hydrocarbons in the petroleum that are separated into the fractions is by the fractional distillation method.
The Petroleum will be separated into the fractions through the process called as the fractional distillation. The Petroleum is heated in the distillation tower, and making the hydrocarbons will vaporize. The highest temperature is present at the bottom in the distillation tower, and the lowest temperature is present at the top of the distillation tower.
Therefore at the different heights in the distillation tower, the different temperatures will be present. The vaporized hydrocarbons will rise through the tower and will condense as the temperature will be decreases.
To learn more about hydrocarbons here
https://brainly.com/question/29361672
#SPJ4
what does spesific urine specific gravity range?
Urine density, or specific gravity, is a measurement of the solute content in the urine. Urine specific gravity typically falls within the range of 1.003 to 1.030. A specific gravity that is less than 1.003 may be abnormal and
The density of urine, which represents the solute content in the urine, is measured by urine specific gravity. Urine specific gravity typically falls within the range of 1.003 to 1.030. Less than 1.003 may be an indication of diabetes insipidus, chronic renal disease, or excessive hydration. On the other hand, a higher than average specific gravity (more than 1.030) might be a sign of renal illness, uncontrolled diabetes, or dehydration. Nevertheless, additional factors including hydration levels, medication use, and underlying medical disorders must be taken into account when interpreting urine specific gravity. Any abnormal urine test findings should be discussed with a healthcare professional for proper
Learn more about specific here:
https://brainly.com/question/20348182
#SPJ4
True or False? colligative properties depend only on solute concentration; the identity of the solute is not important.
Colligative qualities of solutions are traits that are dependent on the quantity of solute ions or molecules that are present, but not on the kind of solute. Vapor pressure reduction is one of its collaborating qualities.
The correct answer is true
Simply put, what do ions mean?A chemical species known as an ion is one that has a significant amount of either positive or negative charge. Atoms or molecules with non-zero net charges are referred to as "ions" in this context.
How do ions form?According to definition, a ion is just an electrostatically particle that is created by either taking electrons from a negative ion to generate a positive ion and adding electrons to the a neutral atom to produce a negative ion. The amount of protons remains constant as an ion forms.
To know more about ion visit:
https://brainly.com/question/14982375
#SPJ4