when rotated about its center, a regular hexagon has _______ rotational symmetries. in addition to rotational symmetry, a regular hexagon has _____ lines of reflectional symmetry.

The value of cups of water in milliliter can be calculated by simply divide the volume by 236.6 so 150 milliliters can be 0.634 US cups.

Unit conversion is the process of converting the measurement of a given amount between various units, often by multiplicative conversion factors that alter the value of the measured quantity without altering its effects.

Divide the millilitre volume by the cup size to convert 150 mL to cups: The formula to convert 150 mL to cups is [cups] = 150 / cup size. Following are the outcomes as a result:

Cups to 150 mL =

Please take note that these 150mL to cups conversion figures have been adjusted to five decimals. If you're unsure which cup unit you have, you can find further details on our main page.

In any event, you must first determine the size of your cup before applying the formula or using our converter, which can change any volume, to convert 150mL to cups.

Learn more about Milliliter to Cups:

https://brainly.com/question/30400210

#SPJ4

The solution sets for the inequality 10+y<10-3y and -6≥10-8x are y>-2.5 and x≤0.75, respectively.

Inequality is a mathematical concept used to compare two expressions and determine whether one is larger or smaller than the other. It is represented by symbols such as <, >, ≤, and ≥.

To find the solution set of 10+y<10-3y, we must first isolate the variable y on one side of the equation.

To do this, we need to subtract 10 from both sides of the equation, leaving us with y<-10-3y.

We can then divide both sides by -4 to get

=> y>-2.5.

Thus, the solution set of 10+y<10-3y is y>-2.5.

To find the solution set of -6≥10-8x, we must first isolate the variable x on one side of the equation.

To do this, we need to subtract 10 from both sides of the equation, leaving us with

=> -6≥-8x.

We can then divide both sides by -8 to get

=> x≤0.75.

Thus, the solution set of -6≥10-8x is x≤0.75.

To know more about inequality here.

https://brainly.com/question/28823603

#SPJ4

The units of v''(r) will be cubic centimeters per square centimeter, or [tex](cm^3/cm^2)[/tex].

The second derivative of a function represents the rate of change of the first derivative, or the rate of change of the rate of change of the original function.

In this case, the function v(r) models the volume of a basketball, which is measured in cubic centimeters [tex](cm^3)[/tex]. The independent variable r is measured in centimeters (cm).

The first derivative of v(r) with respect to r is, which represents the rate of change of the volume with respect to the radius, and has units of [tex]cm^2[/tex] (cubic centimeters per centimeter).

The s[tex](cm^3/cm^2).[/tex]second derivative of v(r) with respect to r is v''(r), which represents the rate of change of the first derivative, or the rate of change of the rate of change of the volume with respect to the radius. The units of v''(r) will be [tex]cm^-1[/tex], or the inverse of the units of the first derivative, which is  [tex](cm^3/cm^2)[/tex].

For more such questions on centimeters

https://brainly.com/question/28523935

#SPJ4  

The length of segment WX is given as follows:

8.5 units.

Suppose that we have two points with coordinates [tex](x_1,y_1)[/tex] and [tex](x_2,y_2)[/tex].

The shortest distance between them is given by the equation presented as follows:

[tex]D = \sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]

The length of a segment is given by the distance between it's two endpoints.

Hence the length of segment WX is obtained as follows:

WX = sqrt((-1 - 5)² + (-9 - (-3))²)

WX = 8.5 units.

More can be learned about the distance between two points at https://brainly.com/question/7243416

#SPJ1

Two meter is approximately equal to 78.7402 inches

To convert 1 meter to inches, we can use the following formula:

1 meter = 39.3701 inches

The conversion factor is 39.3701

The conversion is the process of changing the unit of one quantity to another units  

The conversion factor is defined as the number that is used to change one unit to another units by multiplying or dividing

Therefore,

The length in inches = conversion factor × The length in meter

Substitute the values in the equation

2 meter = 39.3701 × 2

Multiply the numbers

= 78.7402 inches ( rounded to four decimal places )

Therefore, one meter is 78.7402 inches

Learn more about conversion factor here

brainly.com/question/5056146

#SPJ4

Answer:

1, 4, and 7

Step-by-step explanation:

The rest are equal to angle 2

The conversion of 720 minutes to hours is equal to 12 hours.

The units involved in this conversion are minutes and hours.The SI symbols for minute or minutes are min for time measurement, and the prime symbol after a number, e.g. 5′, for angle measurement. An hour (symbol: h; also abbreviated hr.) is a unit of time conventionally reckoned as 1⁄24 of a day and scientifically reckoned as 3,599–3,601 seconds, depending on conditions.The conversion factor from minutes to hours is 0.0166667, which means that 1 minutes is equal to 0.0166667 hours:1 min = 0.0166667 hr, There are 60 minutes in one hour. To convert 720 minutes to hours, you can divide 720 by 60:

720 minutes ÷ 60 minutes/hour = 12 hours

So, 720 minutes is equal to 12 hours.

For such more questions on conversion,

https://brainly.com/question/30774660

#SPJ4

Explanation:

You want synthetic division explained for division of (2x^4 -3x^3 -5x^2 +3x +8) by (x-2).

In general, synthetic division is long division without writing the variables. It takes advantage of the fact that subtracting the product of the quotient term and the divisor makes the leading term go to zero at each step. This makes it possible to write the entire division on one line, instead of several. (The long division of these polynomials is shown in the second attachment.)

Synthetic division is most easily accomplished as division of a polynomial by a monic binomial—a binomial of the form x -a. Both dividend and divisor can be divided by the leading coefficient of the divisor if it is not 1.

The first attachment shows the tableau that is used during the synthetic division process. At top left is the opposite of the divisor constant. (This is the value that makes the divisor zero.) By using the opposite of the constant, later steps can involve addition, rather than subtraction, which simplifies the process and reduces errors.

To the right of the divisor zero, the coefficients of the polynomial are listed in decreasing order of degree. If a polynomial term is missing, then a 0 is used for its coefficient. Typically, the tableau is drawn with a vertical line between the divisor zero and the polynomial coefficients.

A horizontal line is drawn below the coefficients, with enough space to allow for partial products to be written between the coefficients and the horizontal line. The first (left-most) dividend polynomial coefficient is copied below the line.

From here, steps for succeeding columns of the tableau are the same. Working left-to-right, the value just written below the line is multiplied by the divisor zero, and that product is written above the line in the next column to the right. The coefficient is added to that, and the sum is written below the line.

The sum in the final (rightmost) column is the remainder from the division. The quotient from the division has the set of coefficients that are the numbers below the line to the left of the remainder.

As shown in the attachment, the result of using synthetic division for the given polynomials is ...

  2 1 -3 -3 2

This means the quotient is 2x³ +x² -3x -3 and the remainder is 2. That is, ...

  (2x⁴-3x³-5x²+3x+8) ÷ (x-2) = 2x³ +x² -3x -3 + 2/(x-2)

__

Additional comment

Synthetic division is really designed for division by monic binomials. It can be extended (with extreme care) to division by monic polynomials of higher degree than 1. What makes it work is the fact that the leading dividend term disappears at each step, so no accounting for the coefficients of the leading terms is required.

The same trick of using sums instead of differences could be applied to long division—again, with extreme care.

Answer:

60

Step-by-step explanation:

The diamond problem solver is a graphical tool used to solve problems involving the addition and multiplication arithmetic operations.

It is frequently used in elementary mathematics to assist students in comprehending the relationship between these operations and their inverse operations of subtraction and division.

The diamond problem solver gets its name from the fact that it is drawn in the shape of a diamond with four sections. The sum or product is represented by the top section, the addends or factors are represented by the two side sections, and the missing value is represented by the bottom section.

We use the diamond problem solver by writing the known values in the diamond's two side sections and filling in the missing value in the bottom section. Then we add or multiply the known values to find the value in the diamond's top section.

For example, to solve the problem:

7 + ___ = 12

We would write 7 in the left section of the diamond and 12 in the top section, leaving the right section blank. We then fill in the bottom section with the missing value by subtracting 7 from 12:

12 - 7 = 5

So, the value in the bottom section of the diamond is 5, and the completed diamond would look like this:

  [tex]07\\+ ?\\-\\ 12[/tex]

[tex]07\\+ 5\\--\\ 12[/tex]

As a result, the problem's missing value is 5. The diamond problem solver can also be used to solve multiplication problems by placing the known values in the side sections and the product in the top section.

For more question on diamond problem solver click on

https://brainly.com/question/28783041

#SPJ4

Answer:

Option C. 1 13/18

Step-by-step explanation:

8/9 + 2/3 + 1/6

Taking LCM as 18

8/9 × 2/2 + 2/3 × 6/6 + 1/6 × 3/3

16/18 + 12/18 + 3/18 = 31/18 = 1 13/18

The integral of sec^3(4x) can be found using the substitution method.

Let u = 4x, then du/dx = 4 and dx = du/4

Substitute these values into the integral:

Now we can use the formula for the integral of sec^3(x):

Substitute back in u for x:

Therefore, the integral of sec^3(4x) is (1/8) sec(4x) tan(4x) + (1/8) ln |sec(4x) + tan(4x)| + C, where C is the constant of integration.

~ Zeph

The line parallel to the line b is the line a

From the question, we have the following parameters that can be used in our computation:

The figure

Also, we have

Angle 1 = 90 degrees

The measure of angle 1 and angle 5 are congruent

This is so because they are corresponsing angles

So, we have

Angle 5 = 90 degrees

The above implies that line a and line b are parallel lines

Read more about angles at

brainly.com/question/25716982

#SPJ1

Answer:

the coordinates of the point that partitions the directed line segment from (-6,-2) to (9,-7) into a ratio of 3 to 2 are (0, -4).

Step-by-step explanation:

To find the coordinates of the point that partitions the directed line segment from (-6,-2) to (9,-7) into a ratio of 3 to 2, we can use the following formula:

P = ( (2bx + 3ax)/(2+3) , (2by + 3ay)/(2+3) )

where P is the point we are looking for, (ax, ay) and (bx, by) are the coordinates of the two endpoints of the line segment, and the numbers 2 and 3 represent the ratio in which the line segment is to be divided.

Substituting the given values, we get:

P = ( (29 + 3(-6))/(2+3) , (2*(-7) + 3*(-2))/(2+3) )

= ( (18 - 18)/5 , (-14 - 6)/5 )

= ( 0, -4 )

Therefore, the coordinates of the point that partitions the directed line segment from (-6,-2) to (9,-7) into a ratio of 3 to 2 are (0, -4).

The factors of 20 are 1, 2, 4, 5, 10 and 20. A number that divides 20 exactly without producing a remainder is said to be one of its factors.

In other words, the factors of 20 are the numbers that, when multiplied in pairs, result in the number 20. 20 has many factors besides 1 and 20 because it is an even composite number. Thus, 1, 2, 4, 5, 10, and 20 are the factors of 20.

By dividing 20 by various integers, the division method allows one to discover the factors of the number 20. The integers are the factors of 20 if they divide 20 precisely with a remainder of 0. Let's discuss the factors of 20 using the division method now.

20/1 equals 20 (factor 1; remainder 0).

20/2 = 10 (Factor is 2 and Remainder is 0)

20/4 equals 5 (the factor is 4 and the remainder is 0).

20/5 equals 4 (the factor is 5 and the remainder is 0).

20/10 equals 2 (factor is 10; remainder is 0).

20/20 = 1 (20 is the factor and 0 is the remainder).

To learn more about factorization: https://brainly.com/question/18187355

#SPJ4

An mg is equivalent to 0.001 g since the prefix "milli-" in milligrams stands for 10-3. A microgram is equivalent to 0.000001 g in mcg, where the prefix "micro-" stands for 10-6.

The terms milligrams (mg) and micrograms (mcg) are interchangeable. You must divide the value in mcg by 1000 to convert it to mg.

The conversion formula is as follows:

1 mcg Equals 0.001 mg

So, you may divide by 1000 or increase the number in mcg by 0.001 to convert it to mg. For instance:

500 mcg equals 0.5 mg (500 x 0.001 mg).

1000 mcg equals 1000 times 0.001 mg equals 1 mg

500 mcg equals 2.5 mg (or 2500 x 0.001 mg).

Learn more about the mcg & mg conversion at

https://brainly.com/question/30402014

#SPJ4

The decimal equivalent of 5/3 is 1.666666667.

When we write a decimal, we use a decimal point to separate the whole number part from the fractional part.

The digits to the right of the decimal point represent fractions of a whole. The decimal 0.25 represents 25/100 or 1/4, while the decimal 0.5 represents 50/100 or 1/2.

In general, we can convert any fraction to a decimal by dividing the numerator by the denominator.

To convert 5/3 to a decimal, we need to divide 5 by 3. When we perform this division, we get 1.666666667. This is a repeating decimal, meaning that the number 6 repeats indefinitely after the decimal point.

In general, whenever you divide one integer by another, you will either get a finite decimal (like 0.5 or 0.75) or a repeating decimal (like 0.3333 or 0.142857). In some cases, the decimal may terminate, meaning that it stops after a certain number of decimal places. For example, 1/4 is equal to 0.25, which is a terminating decimal.

To know more about decimal here.

https://brainly.com/question/9543292

#SPJ4

Answer:

or

0.333333

Step-by-step explanation:

8^x = 2

whats the value of x?

8^x = 2

log(8^x) = log(2)

x * (log(8)) = log(2)

x = (log(2))/(log(8))

x = 0.333333 or 1/3

----------------------

check

[tex]8^{1/3}[/tex] = 2

2 = 2

the answer is good

Answer:

[tex]x=-5,5[/tex]

Step-by-step explanation:

[tex]y=x^2-25\\0=x^2-25\\0=(x+5)(x-5)\\x=-5,5[/tex]

Now that we know the value of x, we can find the values of DP, PH, and HD:

DP = 17x = 17(0.295) = 5.015

PH = 6x + 5 = 6(0.295) + 5 = 6.77

HD = 20x - 3 = 20(0.295) - 3 = 2.9

Therefore, DP ≈ 5.015, PH ≈ 6.77, and HD ≈ 2.9.

The perimeter of a form is its edge's radius. Learn how to multiply the lengths of a shape's sides to determine its perimeter.

To solve this problem, we need to use the fact that the perimeter of ADPH is 23.5. We know that AD = DP + HD, and we also know the values of DP, PH, and HD in terms of x. So, we can set up an equation using these values and solve for x.

AD = DP + HD

AD = 17x + (20x - 3)

AD = 37x - 3

Perimeter of ADPH = AD + DP + PH + HD

23.5 = (37x - 3) + 17x + (6x + 5) + (20x - 3)

Simplifying the above equation, we get:

23.5 = 80x - 1

Solving for x, we get:

x = 0.295

Now that we know the value of x, we can find the values of DP, PH, and HD:

DP = 17x = 17(0.295) = 5.015

PH = 6x + 5 = 6(0.295) + 5 = 6.77

HD = 20x - 3 = 20(0.295) - 3 = 2.9

Therefore, DP ≈ 5.015, PH ≈ 6.77, and HD ≈ 2.9.

To know more about perimeter visit:

https://brainly.com/question/6465134

#SPJ1

The equation tan(30°) = 5/b can be used to solve for b. The solution has been obtained by using trigonometry.

What is trigonometry?

The study of the sides, angles, and connections of the right-angle triangle falls under the purview of the branch of mathematics known as trigonometry.

We are given a right angled triangle, with angle BCA = 90° and angle CAB = 30°. Also, the length of side BC is 5 centimeters, the length of BA is 10 centimeters, and the length of CA is b.

Using trigonometry,

We know that tan theta = opposite side/ adjacent side

So,

⇒tan θ = 5/b

Here, θ = 30°

So,

⇒tan 30° = 5/b

Hence, the equation tan(30°) = 5/b can be used to solve for b.

Learn more about trigonometry from the given link

https://brainly.com/question/13729598

#SPJ1

Although both grains and grams are weight-measuring units, they are not interchangeable.

The weight of gunshots, arrows, and gunpowder is often measured in the United States using a unit of mass called a grain. A grain weighs around 0.06479891 grams.

In contrast, a gram is a mass unit in the International System of Units (SI) that is often employed in scientific and practical contexts. There are 15.4323584 grains in one gram.

You may multiply the total number of grains by 0.06479891 to convert grains to grams. If you have 500 grains, for instance, you would convert them to grams as follows: 500 grains x 0.06479891 grams per grain = 32.399455 grams.

Learn more about grains to grams at

https://brainly.com/question/28794162

#SPJ4

The three dimensional shapes  are objects that have three dimensions - length, width, and height. Cubes, spheres and pyramids are the examples of 3D shapes

Three-dimensional shapes, also known as 3D shapes, are objects that have three dimensions - length, width, and height. These shapes exist in physical space and can be perceived and touched. Some common examples of 3D shapes include:

Cubes: A cube is a six-sided shape with all sides equal in length, and all angles right angles.

Spheres: A sphere is a round 3D shape with no corners or edges.

Pyramids: A pyramid is a three-dimensional shape with a polygon as its base and triangular faces that meet at a point called the apex.

Cylinders: A cylinder is a 3D shape with a circular base and straight sides that extend upwards.

These shapes can be found in a variety of contexts, from architecture to engineering, to everyday objects like toys and packaging.

Learn more about Three-dimensional shapes here

brainly.com/question/12644033

#SPJ4

Answer:

x = 61

Step-by-step explanation:

[tex]x + 119 = 180[/tex]

[tex]x = 180 - 119[/tex]

[tex]x = 61[/tex]

Answer:

x = 61

Step-by-step explanation:

Nominal variables are calculated in current year prices and real variables are measured in base year dollars to adjust for the effect of inflation by the price index.

Nominal Variable:

Nominal variables as well as dichotomous and ordinal variables constitute the three types of categorical variables. Dichotomous variables are a subtype of dummy variables that can only have two levels or categories. On the other hand, ordinal variables can have two or more categories, but they can be ordered or ordered. In addition to categorical variables, other types of variables are used, such as interval and ratio variables. An example of a dummy variable is hair color. Indeed, the hair can be of different colors like blond, black, brown, red, etc. These categories cannot be sorted and no operations can be performed.

Real Variable:

A real variable is one that does not take into account the effects of price and/or inflation. Conversely, nominal variables are variables that do not take into account the effect of inflation. As a result, changes in prices and inflation affect nominal rather than real variables. Real changes in private equity, real disposable income, real government spending, real private fixed investment, etc. The same concept of calculating real wages applies to all of these variables.

Learn more about Price:

https://brainly.com/question/3140974

#SPJ4

The reminder of F(x)  when it is  divided by x-3 by using the factorizing method is equal to 8.

The Remainder Theorem is a method to Euclidean polynomial division. According to this theorem, dividing a polynomial P(x) by a factor (x - a), which is not an element of the polynomial, yields a smaller polynomial and a remainder.

"f(x) is divided by (x - 3)" is the mathematical expression for the statement.

[tex]\frac{x^4 -5x^2-6x-10}{x-3}[/tex]

factorize the numerator in the above expression.

[tex]\frac{x^4-3x^3+3x^3-9x^2+4x^2-12x+6x-18+18-10}{x-3}[/tex]

Further simplify the above expression.

[tex](x^3+3x^2+4x+6) + \frac{8}{x-3}[/tex]

Thus, when f(x) is divided by (x - 3), the remaining is 8.

The Remainder Theorem starts with a polynomial, say p(x), where "p(x)" is a polynomial p with x as a variable. Then, according to the theorem, divide that polynomial p(x) by some linear factor x - a, where an is just some number. A lengthy polynomial division is performed here, yielding some polynomial q(x) (the variable "q" stands for "the quotient polynomial") and a polynomial remainder is r. (x). It may be stated as follows:

q(x) + r = p(x)/x-a (x)

Learn more about Remainder;

https://brainly.com/question/15080015

#SPJ4

y = 3x - 4 is the equation of the line in slope intercept form. Option C is correct

The formula for calculating the equation of a line in point slope form is expressed as:

y - y0 = m(x - x0)

where:

m is the slope

(x0, y0) is the point on the line

Using the coordinate points (2, 2) and (0, -4). The slope is calculated as:

Slope = -4-2/0-(2)
Slope = -6/-2
Slope = 3

The required equation will therefore be expressed as:

y + 4 = 3(x - 0)

y + 4 = 3x

y = 3x - 4

Hence the slope-intercept form of the equation is y = 3x - 4

Learn more on equation of a line here: https://brainly.com/question/13763238

#SPJ1

The given statement that you can compare two marginal distributions to see if the corresponding two variables are related is false.

In probability theory and statistics, the probability distribution of the variables included in a subset is the marginal distribution of a subset of a collection of random variables. Without taking into account the values of the other variables, it provides the probabilities of different values for each variable in the subset.

Hence, to determine whether the relevant two variables are connected, you cannot compare two marginal distributions.

Learn more about variables at:

https://brainly.com/question/25223322

#SPJ1

The cube root of 64 is 4.

Cube root of number is value which when multiplied by itself three times to produces original number.

Cube root denoted by ∛ sign.

Given number is 64.

We have to find the cube root of 64.

To find the cubic root of number,

Following steps should be followed:-

1. We can use the prime factorization method.

First we evaluating the prime factors of given number

[tex]2\times2\times2\times2\times2\times2=64[/tex]

2. We can pair similar digits in group of three,

4 x 4 x 4 = 64.

We can write it as,

[tex]\sqrt[3]{4} = 64[/tex]

The cube root of 64 is 4

For similar questions on conversion of cube to cube root,

https://brainly.com/question/12105008

#SPJ4

Real question is

Find the cube root of 64?