Answer:
Array of variables
Explanation:
This occurs when you group together related variables
You wish to use your personal laptop computer at work, but the it department folks will not allow this. the likely reason is that ______.
Answer: Your non-work related use of a laptop could increase vulnerability.
Explanation: Vulnerability is one of the most important and stressed out section in IT, so it's best to decrease that possibility whenever!
I hope this helps!
Define a function Output Value() that takes two integer parameters and outputs the sum of all negative integers starting with the first and ending with the second parameter. If no negative integers exist, sum is 0. End with a newline. The function does not return any value. Ex: If the input is -7 1, then the output is: -28 Note: Negative numbers are less than 0.
The function is written in C++ programming language and is be displayed below:
long OutputVal(int start, int end) {
long result = 1;
for (int num = start; num <= end; num++) {
result *= num;
}
return result;
}
The program defines a function Output Value(), takes two integer parameters, and outputs the sum of all negative integers starting with the first and ending with the second parameter.
Read more about C++ here:
https://brainly.com/question/20339175
#SPJ1
A _______ engine is a specialized program that assists you in locating information on the web and the internet.
Answer:
search
Explanation:
A search engine is a type of software that is used to carry out web searches. It works by "crawling" through the World Wide Web one web page at a time and indexing the pages.
We initialize the parameters to all zero values and run the linear perceptron algorithm through these points in a particular order until convergence. The number of mistakes made on each point are shown in the table below. (These points correspond to the data point in the plot above)
The main aim of running the parameters in the linear perceptron algorithm is to be able to develop a machine learning algorithm for binary classification tasks.
What is a linear perceptron algorithm?This refers to the linear classification algorithm that is used in machine learning.
This is done in order to learn a decision boundary that divides different classes using a hyperplane.
Hence, we can see that your question is incomplete because the parameters are not included, hence a general overview was given to give you a better understanding of the concept.
Read more about machine learning here:
https://brainly.com/question/25523571
#SPJ1
scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.
SJF scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.
What is SJF in operating system?SJF is a term that connote Shortest Job First. It is said to be a type of CPU scheduling whose algorithm is linked with each as it is said to process the length of the next CPU burst.
Note that for one to be able to know the time for the next CPU burst to take place, one need to take the SJF into consideration as that is its function.
Hence, SJF scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.
See options below
A) Multilevel queue
B) RR
C) FCFS
D) SJF
Learn more about scheduling from
https://brainly.com/question/19309520
#SPJ1
What is a "Top-Level Domain Name"?
A top-level domain is known to be an aspect of a domain that quickly follows the last dot symbol that is seen in a domain name.
What is a "Top-Level Domain Name"?This is known to be the biggest level in terms of the hierarchical Domain Name System of the Internet.
Note that TLD (top-level domain) is said to be the most generic domain that is seen on the Internet's hierarchical DNS (domain name system) as A top-level domain is known to be an aspect of a domain that quickly follows the last dot symbol that is seen in a domain name.
Learn more about Domain Name from
https://brainly.com/question/13437432
#SPJ1
Computer professionals known as software engineers, or Blank______, use the software development life cycle to create software required for information systems.
Answer:
Computer professionals known as software engineers, or programmers use the software development life cycle to create software required for information systems.
Explanation:
Computer professionals are called software engineers and programmers because they develop and program software. Some additional titles for computer professionals are hardware engineers and iOS/Android developers.
When posting to a professional networking account, you should share stories and comments that _____.
When posting to a professional networking account, you should share stories and comments that Offer valuable information to your target audience
What is meant by a professional networking account?This is used to refer to an account that has a large number of audiences or of people who follow the account based on what the owner of the network offers. The reason for this may be due to the fact that account is a blog that talks about health or about lifestyle.
It is advised that the person who is behind the account keep the people that are his audiences in mind whenever he is sharing posts to the account. The information that would be most useful to the people has to be considered.
Hence we can say that When posting to a professional networking account, you should share stories and comments that Offer valuable information to your target audience
Read more on networking here:https://brainly.com/question/1027666
#SPJ1
A touch screen _____.
A touch screen is known to be a kind of a display device that gives room for its users to be able to interact with a computer through the use of their finger or stylus.
What is a Touch Screen?Touch screen are regarded as output device as a person can be able to touch and use screen that displays the content in their mobile.
Hence, A touch screen is known to be a kind of a display device that gives room for its users to be able to interact with a computer through the use of their finger or stylus.
Learn more about touch screen from
https://brainly.com/question/17654061
#SPJ1
You have a user remotely connecting to the corporate network from a client location. They can connect to the corporate network file server. But they cannot access files and folders they need on the client LAN in order to work on their project. What would you enable in order to allow the user to access resources on both networks while the VPN is connected
I don't really get this question but I will go with hotspot
The _________________ can be used to repair common causes of unbootable operating systems. It is based on the Windows Preinstallation Environment (Windows PE).
The Windows Recovery Environment (Windows RE or WinRE) can be used to repair common causes of unbootable operating systems. It is based on the Windows Preinstallation Environment (Windows PE).
What can be used to repair common causes of unbootable operating system?The use of the Windows Recovery Environment (WinRE) is known to be a kind of tools that is often used in the recovery environment that is said to often helps in the repair of the common issues of unbootable operating systems.
Hence, The Windows Recovery Environment (Windows RE or WinRE) can be used to repair common causes of unbootable operating systems. It is based on the Windows Preinstallation Environment (Windows PE).
Learn more about operating systems from
https://brainly.com/question/22811693
#SPJ1
The system log daemon, rsyslogd, creates a socket for other system processes to write to. what is the path to this socket?
If the system log daemon, rsyslogd, creates a socket, the path to this socket is known to be /dev/log.
What is the system log daemon?The syslog daemon is known to be a kind of a server process that is known to often gives or provides a form of message logging tools that is made for application and system processes.
Note that the syslog daemon is said to be one that begins by the Internet Daemon and it is also one that tend to receives messages on well-known port such as 514.
Note that The syslog daemon must be on before any application program and as such, If the system log daemon, rsyslogd, creates a socket, the path to this socket is known to be /dev/log.
Learn more about system log from
https://brainly.com/question/25594630
#SPJ1
See full question below
The System Log Daemon, rsyslogd, creates a socket for other system processes to write to. What is the path to this socket?
Select one:
a. /etc/rsyslog.socket
b. /var/log.sock
c. /tmp/log
d. /dev/log
Output values below an amount Write a program that first gets a list of integers from input. The input begins with an integer indicating the number of integers that follow. Then, get the last value from the input, which indicates a threshold. Output all integers less than or equal to that last threshold value. Assume that the list will always contain fewer than 20 integers. java
The program that first gets a list of integers from input, gets the last value from the input, which indicates a threshold, and outputs all integers less than or equal to that last threshold value is:
import java.util.Scanner;
public class LabProgram {
/* Define your methods here */
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
int[] userValues = new int[20];
int upperThreshold;
int numVals;
numVals = scnr.nextInt();
GetUserValues(userValues, numVals, scnr);
upperThreshold = scnr.nextInt();
OutputIntsLessThanOrEqualToThreshold(userValues, numVals, upperThreshold);
}
}
Read more about java programming here:
https://brainly.com/question/26952414
#SPJ1
Many programmers think object-oriented programming is a superior approach to procedural programming. Others think it adds a level of complexity that is not needed in many scenarios. Find and summarize arguments on both sides. With which side do you agree
I agree with the programmers who think object-oriented programming is a superior approach to procedural programming.
Why is OOP better than procedural programming?In terms of Security, Object-oriented programming is said to have more of a secure based than procedural programming, due to the level of abstraction or that is due to data hiding property.
Note that It hinders the access of data to any member functions of the same class and one cannot see a thing like that such as data hiding in the procedural programming framework.
Learn more about object-oriented programming from
https://brainly.com/question/12342989
#SPJ1
Write the first line of a function named Days. The function should return an integer value. It should have three integer parameters: intYears, intMonths, and intWeeks. All arguments should be passed by value.
Answer:
Program:
Module Module1
Function Days(intYears As Integer, intMonths As Integer, intWeeks As Integer) As Integer
' 1 year = 365days
' 1 month=30.417 days
' 1 week = 7 days
Days = 365 * intYears + 30.417 * intMonths + 7 * intWeeks
End Function
Sub Main()
Dim years, months, weeks As Integer
Console.Write("Enter the number of years: ")
years = Convert.ToInt32(Console.ReadLine())
Console.Write("Enter the number of months: ")
months = Convert.ToInt32(Console.ReadLine())
Console.Write("Enter the number of weeks: ")
weeks = Convert.ToInt32(Console.ReadLine())
Console.WriteLine("Days: " & Days(years, months, weeks))
Console.ReadKey()
End Sub
End Module
Which data protection process provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations
The data protection process that provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations is known as The European Union General Data Protection Regulation (GDPR).
Who are held responsible for your compliance with data protection laws and processes?Employers are known to be people who must be held accountable for data processing works while also working and complying with data protection principles.
The General Data Protection Regulation (GDPR) is known to be one of the hardest privacy and security law in the globe as it is known to be a body that imposes obligations onto its firm anywhere.
Hence, The data protection process that provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations is known as The European Union General Data Protection Regulation (GDPR).
Learn more about data protection from
https://brainly.com/question/27113550
#SPJ1
For the IPv4 CIDR address 153.10.22.56 /22 What is the... Netmask: [ Select ] Network Address: [ Select ] Host Mask: [ Select ] Broadcast Address: [ Select ] Number of possible hosts: [ Select ] Host Number: [ Select ]
Netmask:
The netmask is calculated by putting the number of 1’s equal to the given mask value (here 22).
Netmask = 11111111.11111111.11111100.00000000
= 255.255.252.0
Therefore, the netmask is equal to 255.255.252.0
Network Address:
The network address is obtained by performing the AND operation of the bits in the given IP address with the bits of the netmask.
IP address (153.10.22.56) = 10011001.00001010.00010110.00111000
Netmask (255.255.252.0) = 11111111.11111111.11111100.00000000
Network address = 10011001.00001010.00010100.00000000
= 153.10.20.0
Therefore, the network address is equal to 153.10.20.0
Host Mask:
The remaining or the unused bits in the netmask are used as the host mask. In other words, the host mask is obtained by complementing each bit of the netmask.
Netmask = 11111111.11111111.11111100.00000000
Host mask = 00000000.00000000.00000011.11111111
= 0.0.3.255
Therefore, the host mask is equal to 0.0.3.255
Broadcast address:
The broadcast address is used to send the packages to all the hosts in the network. It is obtained by setting all the bits after the network address to 1.
Network address (153.10.20.0) = 10011001.00001010.00010100.00000000
Broad cast address = 10011001.00001010.00010111.11111111
= 153.10.23.255
Therefore, the broadcast address is equal to 153.10.23.255
The number of possible hosts:
The number of possible hosts is computed as follows:
Possible hosts = 2n, where n is the number of host bits.
Out of the above 2n hosts, 2 are reserved and hence the number of usable hosts is equal to 2n – 2.
Number of hosts = 210 – 2 = 1024 – 2 = 1022
Host number:
Host number is the decimal equivalent of the host bits in the IP address.
Ip address (153.10.22.56) = 10011001.00001010.00010110.00111000
Host bits = 10.00111000
Host number = 29 + 0 + 0 + 0 + 25 + 24 + 23 + 0 + 0 + 0
= 512 + 32 +16 + 8
= 568
Hence, the host number is equal to 568.
See more abou computing at: brainly.com/question/14971369
#SPJ1
When making routine transponder code changes, pilots should avoid inadvertent selection of which code?
When making routine transponder code changes, pilots should avoid inadvertent selection of code. 7700.
What are the transponder code that pilot should avoid?Under normal as well as non-emergency operations, it is very essential for pilot to make sure he avoid using the transponder codes of 7500, as well as 7600, and 7700.
Especially while switching codes, It is easy in switching by pilot to go to of these 3 codes on accident.
In this case, When making routine transponder code changes, pilots should avoid inadvertent selection of code. 7700.
Learn more about general emergency on:
https://brainly.com/question/14331925
#SPJ1
The command-line interface tells a user that it's ready to receive commands by displaying a specific set of characters called a(n) _____
Answer:
it's called the prompt, mean yeah
The cell tower’s base transmission station is connected to a mobile ____ station.
The cell tower’s base transmission station is connected to a mobile switching station.
What is a switching station?A switching station is known to be a kind of a substation that is known to be without transformers and it is one that often operate only based or at a single voltage level.
Note that Switching stations are known to be often used as collector and they also acts as a distribution stations.
Hence, The cell tower’s base transmission station is connected to a mobile switching station.
Learn more about transmission station from
https://brainly.com/question/1312500
#SPJ1
Define a function SwapRank() that takes two char parameters passed by reference and swap the values in the two parameters. The function does not return any value. Ex: If the input is A C, then the output is: C A
The program that takes two char parameters passed by reference and swap the values in the two parameters is illustrated below.
What is a program?A computer program is a sequence of instructions in a programming language for a computer to execute.
The program is illustrated below:
void SwapGrade(char &g1, char &g2)
{
char t = g1;
g1= g2;
g2 = t;
}
Output
B
C
C B
Learn more about program on:
https://brainly.com/question/26642771
#SPJ1
True or false? you should avoid using your power point slides as handouts, according to the text.
44.4% complete Question A hacker, wanting to gain data on organizational ideas and inventions, uses a spear-phishing attack by creating a believable email containing malware and sending it to an executive, who thinks the email is legitimate and opens it, activating the malware. What is the hacker's goal?
The hacker's goal is to infiltrate the system by making their victims see reasons or believe that they will help them to handle or resolve their specific problems.
What is a spear phishing attack?“Spear phishing” is known to be a form of phishing goal that is said to often targets a particular person or group and it is one that do include information that is well known to be of interest to the target.
Note that the hacker's goal is to infiltrate the system by making their victims see reasons or believe that they will help them to handle or resolve their specific problems.
Learn more about Spear phishing from
https://brainly.com/question/13202003
#SPJ1
If you try to add a new item to a full stack the resulting condition is called a(n)?
Answer:
it's called an overflow
To generate a control break report, your input records must be organized in ____ order based on the field that will cause the breaks.
To generate a control break report, your input records must be organized in directory order based on the field that will cause the breaks.
What is directory?Directory serves as guide in locating a particular item.
The directory is written in a way for an individual or an employee to understand and be able to retrieved needed information.
Therefore, to generate a control break report, your input records must be organized in directory order based on the field that will cause the breaks.
Learn more on directory below
https://brainly.com/question/14364696
#SPJ1
Javascript is an object-based programming language that involves working with the properties and methods associated with objects.
a) True
b) False
Answer:
True
Explanation:
You can set variables and make method functions.
which computer can be used where is no electricity ?
Answer:
mechanical computers
Explanation:
A mechanical computer is built from mechanical components such as levers and gears rather than electronic components. The most common examples are adding machines and mechanical counters, which use the turning of gears to increment output displays.
Answer:
Non-electric computers.
A mechanical computer is a computer built from mechanical components such as levers and gears rather than electronic components
In cell H5, create a formula to divide the value in cell F5 by cell F12 using relative cell references.
The Excel formula to enter in cell H5 using the relative style of cell referencing is = F5/F12
What are Excel formulas?Excel formulas are expressions or equations used alongside Excel functions to perform arithmetic and logical formulas for computation.
How to create the Excel formula to enter in cell H5?From the question, we understand that we are to make use of the relative style of referencing
This means that we make use of the cell name as it is, without adding the "$" sign, as it is in absolute style of cell referencing and mixed style of cell referencing
So, we make use of cell F5 as F5 and we make use of cell F12 as F12
The value in cell F5 divided by cell F12 using relative cell references is represented as:
F5 divided by F12
Rewrite the above formula as follows:
F5/F12
Excel formulas begin with the "=' sign
So, the above formula becomes
= F5/F12
Hence, the Excel formula to enter in cell H5 using the relative style of cell referencing is = F5/F12
Read more about Excel formulas at:
brainly.com/question/1285762
#SPJ1
What is the correct syntax for defining an __init__() method that takes no parameters?
The correct syntax for defining an __init__() method that takes no parameters is: def __init__(self): pass
What is a syntax?The set of guidelines known as syntax establishes the meaning of the different symbol combinations.
This instructs the machine on how to decipher the code.
When writing code, the idea of syntax deals with a very precise collection of words and a very strict sequence for those words when we offer instructions to the machine.
Learn more about syntax:
https://brainly.com/question/831003
#SPJ1
During the merge sort operation for the list {90 7 9 43 62 12 21 36}, at what left and right partition position is 21 added to the temporary list
The point at left and right partition position to add 21 is Left position is 1 and right position is 7.
How do you solve merge sort?The Algorithm for Merge Sort operations are:
First one need to find the middle index of the array. Then one has to Divide the array from the middle. Then do Call merge sort for the second half of the array. Then one can finally merge two sorted halves into one sorted array.Hence, The point at left and right partition position to add 21 is Left position is 1 and right position is 7.
See Group of answer choices
Left position is 2 and right position is 6
Left position is 1 and right position is 7
Left position is 4 and right position is 7
Left position is 2 and right position is 5
Learn more about sort operation from
https://brainly.com/question/15090822
#SPJ1