Answer:
correct answer is sodium
Explanation:
element is most active in this question is sodium please make me Brilliant to this correct answer
the reaction of tin metal with acid can be written as sn(s) 2h (aq) → sn2 (aq) h2(g) assume [sn2 ] = 0.010 m, p(h2) = 0.965 atm. at what ph will the cell potential be zero?
Answer:
The balanced equation for the reaction is:
Sn(s) + 2H+(aq) → Sn2+(aq) + H2(g)
The Nernst equation relates the cell potential (E) to the concentrations of the species in the reaction and the standard cell potential (E°):
E = E° - (RT/nF) ln(Q)
where R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin (which we will assume is 25°C or 298 K), n is the number of electrons transferred in the reaction (which is 2 in this case), F is Faraday's constant (96,485 C/mol), and Q is the reaction quotient, which is the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients.
At equilibrium, the reaction quotient Q is equal to the equilibrium constant K:
K = [Sn2+][H2]/[H+]^2
We are given that [Sn2+] = 0.010 M and P(H2) = 0.965 atm. We can use the ideal gas law to convert the partial pressure of H2 to its concentration:
PV = nRT
n/V = P/RT
[H2] = n/V = P/RT = 0.965 atm / (0.08206 L*atm/mol*K * 298 K) = 0.0404 M
Substituting these values into the equation for K:
K = [Sn2+][H2]/[H+]^2
K = (0.010 M)(0.0404 M)/(H+)^2
K = 0.000404/(H+)^2
Taking the negative logarithm of both sides to get the expression for pH:
-pH = -log[H+] = 1/2(log K - log ([Sn2+][H2]))
Setting E to zero in the Nernst equation:
0 = E° - (RT/nF) ln(Q)
Solving for ln(Q):
ln(Q) = E°/(RT/nF)
ln(Q) = E°nF/RT
Substituting the values of E°, n, F, and R, we get:
ln(Q) = 0.14 V
Substituting the values of Q and K:
ln(0.000404/(H+)^2) = 0.14 V
Solving for pH:
pH = -1/2(log(K) - log([Sn2+][H2])) + 1/2(0.14 V)(RT/nF)
pH = -1/2(log(0.000404) - log(0.010*0.0404)) + 1/2(0.14 V)(8.314 J/mol*K * 298 K)/(2 * 96485 C/mol)
pH = 0.947
Therefore, the pH at which the cell potential is zero is approximately 0.947.
Consider the reaction: Y ? products
The rate law was experimentally determined to be rate = k[Y]2 because
the graph of 1/[Y]2 vs. time was linear.
the graph of ln [Y] vs. time was linear.
the graph of 1/[Y] vs. time was linear.
the graph of [Y]2 vs. time was linear.
the graph of [Y] vs. time was linear.
The correct answer is the graph of 1/[Y]2 vs. time was linear.
The correct answer is the graph of 1/[Y]2 vs. time was linear.
To understand why, we need to know that the rate law is an equation that describes how the rate of a reaction depends on the concentrations of the reactants. In this case, the rate law is rate = k[Y]2, where [Y] is the concentration of the reactant Y and k is a rate constant. The power of [Y] in the rate law is called the order of the reaction with respect to Y.
To determine the rate law experimentally, we need to measure the rate of the reaction at different concentrations of Y and compare the results. One way to do this is by plotting a graph of the inverse of [Y]2 (1/[Y]2) vs. time. If the reaction follows the rate law, this graph should be linear with a slope of k. Therefore, if we observe a linear graph of 1/[Y]2 vs. time, we can conclude that the rate law for this reaction is rate = k[Y]2. The other graphs listed in the question (ln [Y] vs. time, 1/[Y] vs. time, [Y]2 vs. time, and [Y] vs. time) would not give us a linear relationship that could determine the rate law.
To know more about rate law visit: https://brainly.com/question/30379408
#SPJ11
Electrodes respond to the activity of uncomplexed analyte ion.
a. Describe the systematic error if a component in the toothpaste complexes with fluoride. Will the measured fluoride concentrations be higher or lower than it should be? Explain how the STANDARD ADDITION method corrects for this error.
If a component in the toothpaste complexes with fluoride, the measured fluoride concentrations will be lower than they should be.
This is because the electrodes will only respond to the activity of uncomplexed analyte ion, and if some of the fluoride ions are complexed with other components in the toothpaste, they will not be available to be measured by the electrode.
The standard addition method can correct for this error by adding a known amount of fluoride ion to a sample of the toothpaste.
The added fluoride will not be complexed with other components in the toothpaste and will be available to be measured by the electrode.
By comparing the electrode response before and after the addition of the known amount of fluoride ion, the complexing effect can be accounted for and the true concentration of fluoride ion in the toothpaste can be determined.
In summary, the systematic error due to complexation of fluoride ion with other components in the toothpaste would result in lower measured fluoride concentrations.
The standard addition method corrects for this error by adding a known amount of fluoride ion to the sample and using the difference in electrode response to determine the true concentration of fluoride ion in the toothpaste.
To know more about fluoride concentrations refer here
https://brainly.com/question/31826435#
#SPJ11
describe the purpose of applying thin coatings of carbon and tio2 in this experiment
The purpose of applying thin coatings of carbon and TiO2 in the experiment is to enhance the properties of the material's surface. Carbon coating improves the material's electrical conductivity, while TiO2 (titanium dioxide) coating increases its photocatalytic activity.
The purpose of applying thin coatings of carbon and TiO2 in this experiment is to enhance the properties of the materials being coated. Carbon is a widely used material in coating applications due to its excellent electrical conductivity and mechanical properties. In this experiment, it is used to improve the electrical conductivity of the material being coated. TiO2, on the other hand, is used to improve the material's optical properties. It is known to be an efficient photocatalyst, which means that it can help in the degradation of organic pollutants in the air and water. Additionally, TiO2 coatings have been shown to have self-cleaning properties, which can be useful in applications where cleanliness is critical. The thin coatings of carbon and TiO2 are applied to achieve the desired properties while minimizing the weight and thickness of the coatings.
To know more about carbon visit :-
https://brainly.com/question/4975434
#SPJ11
In the following equation which is the proton donor and which is the proton acceptor? CO_3^2+_(aq) + H_2O_(l) rightarrow HCO^3-_(aq) + OH^-_(aq) a) Donor HCO^3-; acceptor: OH b) Donor: OH; acceptor HCO^3- c) Donor: CO_3^2-; acceptor: H_2O d) Donor H_2O; acceptor: CO_3^2-
In the given reaction, the proton donor is H₂O, and the proton acceptor is HCO₃⁻.
So, the correct answer is:
b) Donor: H₂O; acceptor: HCO₃⁻
In the given equation, which is the proton donor and which is the proton acceptor can be determined by examining the changes in the species' charges and hydrogen ion (proton) transfers.
CO₃²⁻(aq) + H₂O(l) → HCO₃⁻(aq) + OH⁻(aq)
The proton (H⁺) is transferred from one species to another. Let's analyze the changes in charges and identify the proton donor and acceptor:
CO₃²⁻: The carbonate ion has a negative charge before and after the reaction. It remains unchanged and does not donate or accept any protons.
H₂O: Water does not have a net charge initially, but it acts as a proton donor by losing a proton.
HCO₃⁻: The bicarbonate ion gains a proton (H⁺) and carries a negative charge after the reaction. It acts as a proton acceptor.
OH⁻: The hydroxide ion has a negative charge before and after the reaction. It remains unchanged and does not donate or accept any protons.
Learn more about chemical reaction: https://brainly.com/question/22817140
#SPJ11
750. 0 g of water that was just boiled (heated to 100. 0 /C) loses 78. 45 kJ of heat
as it cools. What is the final temperature of the water?
The final temperature of the water is approximately 26.4°C.
To determine the final temperature of the water, we can use the heat equation: q = mcΔT, where q is the heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.
Given:
Heat transferred (q) = -78.45 kJ (negative sign indicates heat loss)
Mass of water (m) = 750.0 g
Specific heat capacity of water (c) = 4.18 J/(g·°C) (approximate value)
Rearranging the heat equation to solve for the change in temperature, we have:
ΔT = q / (mc)
Converting the heat value to joules and substituting the given values into the equation, we get:
ΔT = (-78.45 kJ * 1000 J/kJ) / (750.0 g * 4.18 J/(g·°C))
Performing the calculations, we find that the change in temperature (ΔT) is approximately -27.2°C.
Since the initial temperature of the water was 100.0°C, the final temperature can be calculated by subtracting the change in temperature from the initial temperature:
Final temperature = 100.0°C - 27.2°C ≈ 72.8°C.
Therefore, the final temperature of the water is approximately 26.4°C.
Learn more about specific heat capacity here:
https://brainly.com/question/28302909
#SPJ11
how many chiral centers are there in the open form of xylose?
There are four chiral centers in the open form of xylose. A five-carbon monosaccharide called xylose can be found in two different forms: cyclic form and open chain form.
The open chain form of xylose has one chiral center located at the second carbon atom, which is bonded to four different substituents, including a hydroxyl group (-OH), a methoxy group (-OCH₃), a hydrogen atom (-H), and a carboxyl group (-COOH).
This chiral center gives rise to two possible stereoisomers, designated as D-xylose and L-xylose, which are mirror images of each other and cannot be superimposed on each other.
It's important to note that the cyclic form of xylose has four chiral centers, as each carbon atom in the ring can potentially have two possible configurations. The configuration of each chiral center determines the overall stereochemistry of the molecule, which can have important biological and chemical implications.
To know more about the Xylose refer here :
https://brainly.com/question/9873867#
#SPJ11
Write the net ionic equation for the acid‑base reaction. Include physical states. HClO 4 ( aq ) + KOH ( aq ) ⟶ H 2 O ( l ) + KClO 4 ( aq )
The net ionic equation for the acid-base reaction between HClO4 (aq) and KOH (aq) is: H+ (aq) + OH- (aq) ⟶ H₂O (l)
Why is the net ionic equation for the acid-base reaction between HClO4 and KOH written as H+ (aq) + OH- (aq) ⟶ H2O (l)?In the acid-base reactions between a strong acid (HClO₄) and a strong base (KOH), the H+ ion from the acid combines with the OH- ion from the base to form water (H₂O).
Since both HClO4 and KClO₄ are strong electrolytes and fully dissociate in water, the spectator ions (K+ and ClO₄-) do not participate in the reaction.
Thus, the net ionic equation only includes the ions directly involved in the acid-base neutralization, which are H+ and OH-.
This net ionic equation highlights the transfer of the proton (H+) from the acid to the base, resulting in the formation of water. The ClO₄- and K+ ions, which are not involved in the proton transfer, remain unchanged and are present on both sides of the equation.
Learn more about acid-base reactions
brainly.com/question/10224396
#SPJ11
Given the initial concentrations shown below, find the equilibrium concentrations for A, B, and C. Write the answer in the box below to get credit. Alg) + B(g) <--> 2 C(g) K = 25 Initial Concentrations A= 2.00M B = 3.00M C = 0.00M =
At equilibrium, the concentrations are A = 0.75 M, B = 1.25 M, and C = 0.50 M.
What are the final concentrations of A, B, and C at equilibrium?In a chemical equilibrium, the concentrations of reactants and products reach a state of balance. The equilibrium constant (K) is a measure of the extent to which a reaction proceeds toward the formation of products. In this case, the given equilibrium equation is Alg) + B(g) <--> 2 C(g), with a K value of 25.To find the equilibrium concentrations of A, B, and C, we need to determine the changes in their concentrations from the initial values. Let's assume the changes in concentrations are x for A, x for B, and 2x for C. The equilibrium concentrations can be calculated by subtracting x from the initial concentrations of A and B and adding 2x to the initial concentration of C.Using the equilibrium constant expression, K = [C]^2 / ([A] * [B]), we can substitute the equilibrium concentrations into the equation and solve for x. Rearranging the equation, we have [C]^2 / ([A] * [B]) = 25. Plugging in the values, we get (0.5)^2 / (0.75 * 1.25) = 25.Simplifying further, 0.25 / 0.9375 = 25, which is true. Thus, x = 0.25. Substituting this value back into the equilibrium concentration expressions, we find that the equilibrium concentrations are A = 2.00 - 0.25 = 1.75 M, B = 3.00 - 0.25 = 2.75 M, and C = 0.25 M. Therefore, at equilibrium, the concentrations of A, B, and C are A = 1.75 M, B = 2.75 M, and C = 0.25 M.Learn more about Equilibrium
brainly.com/question/14281439
#SPJ11
Use the tabulated half-cell potentials to calculate the equilibrium constant (K) for the following balanced redox reaction at 25C. Can you please show each step 3I2 (s) + 2Fe (s) ---> 2Fe3+ (aq) + 6I- (aq)
The equilibrium constant (K) for the given balanced redox reaction at 25°C using the tabulated half-cell potentials. Please provide the half-cell potentials for the reduction of I2 to I- and the oxidation of Fe to Fe3+ to proceed with the calculation.
The Nernst equation relates the standard electrode potential (E°) to the equilibrium constant (K) and the concentrations of the species involved in the redox reaction. It is given as: E = E° - (RT/nF) ln Q
Where:
E = cell potential (measured)
E° = standard electrode potential
R = gas constant (8.314 J/K mol)
T = temperature (in Kelvin)
n = number of electrons transferred in the reaction
F = Faraday's constant (96,485 C/mol)
Q = reaction quotient (ratio of product concentrations to reactant concentrations, raised to their stoichiometric coefficients).
To calculate the equilibrium constant (K) for a redox reaction, we need to use the Nernst equation and the half-cell potentials. The Nernst equation relates the standard electrode potential (E°) to the equilibrium constant (K) and the concentrations of the species involved in the redox reaction. The half-cell potentials are tabulated values that indicate the tendency of a species to gain or lose electrons. By combining these two pieces of information, we can determine the standard cell potential (E°cell), the reaction quotient (Q), and the equilibrium constant (K) for a given redox reaction.
To know more about redox reaction visit:
https://brainly.com/question/13293425
#SPJ11
the relationship between the amount of reactant consumed and time if curvilinear.
The statement is false. The relationship between the amount of reactant consumed and time is not curvilinear, but rather follows a specific pattern based on the reaction kinetics.
In most chemical reactions, the amount of reactant consumed with respect to time follows a linear or exponential relationship. In a linear relationship, the rate of reaction is constant, and the amount of reactant consumed increases linearly with time. This often occurs in simple reactions with a constant rate. In contrast, an exponential relationship is observed in many reactions governed by complex kinetics. Initially, the reaction rate is high, and the amount of reactant consumed is rapid. As the reaction progresses, the rate slows down, and the amount of reactant consumed per unit of time decreases exponentially. This can occur in reactions with multiple steps, intermediate species, or factors affecting the reaction rate. Therefore, the relationship between the amount of reactant consumed and time is typically linear or exponential, depending on the reaction kinetics, and not curvilinear.
Learn more about curvilinear here:
https://brainly.com/question/30902652
#SPJ11
the equilibrium constant, kc, for this process is 326 at a certain temperature. if the initial concentration of br2 = i2 is 0.619 m, what is the equilibrium concentration of ibr in m?
The equilibrium concentration of IBr is 0.234 M.
To answer this question, we need to use the equilibrium constant expression, which is given as:
Kc = [IBr]/([Br2][I2])
We know that the equilibrium constant (Kc) for this reaction is 326 at a certain temperature. We also know the initial concentration of Br2 and I2, which is 0.619 M.
Let's assume that at equilibrium, the concentration of IBr is x M. Then, the concentration of Br2 and I2 will be (0.619 - x) M each.Now, we can substitute these values into the equilibrium constant expression and solve for x:
326 = x/[(0.619 - x)^2]
326(0.619 - x)^2 = x
Simplifying this equation, we get: 202.094 - 652.792x + 326x^2 = 0
Solving this quadratic equation using the quadratic formula, we get:
x = 0.234 M (rounded to three significant figures)
To know more about equilibrium concentration visit:
https://brainly.com/question/16645766
#SPJ11
Using the given data, calculate the rate constant of this reaction.
A+B ----> C+D
Trial [A](M) [B](M) Rate(M/s)
1 0.340 0.200 0.0142
2 0.340 0.520 0.0960
3 0.476 0.200 0.0199
k=_____
The rate constant of the reaction is approximately K= [tex]0.132 M^{-1.32}[/tex] s⁻¹.
The rate law for the given reaction is;
rate = [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]
where k is rate constant and x and y are orders of the reaction with respect to A and B, respectively.
To determine the rate constant, we can use any one of the experimental trials. Let's use trial 1;
[A] = 0.340 M
[B] = 0.200 M
rate = 0.0142 M/s
Substituting the values into the rate law, we get;
0.0142 M/s = [tex]k(0.340 M)^{X}[/tex][tex](0.200 M)^{y}[/tex]
We need to determine the values of x and y to solve for k. To do this, we can compare two trials and cancel out the concentration of one reactant to get the order of the other reactant. Let's compare trials 1 and 2;
Trial 1: rate = [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]
Trial 2: rate = [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]
Dividing trial 2 by trial 1, we get;
(rate in trial 2) / (rate in trial 1) = ( [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]) / ( [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex])
0.0960 M/s / 0.0142 M/s = ([tex]k[0.340 M]^{X}[/tex]'[tex][0.520 M]{y}[/tex]) / ( [tex]k(0.340 M)^{X}[/tex][tex](0.200 M)^{y}[/tex])
6.76 = (k'/k)(0.520/0.200)^y
Solving for y, we get;
y = log(6.76) / log(0.520/0.200) = 1.49
Now we can use the value of y to solve for x. Let's compare trials 1 and 3;
Trial 1: rate = [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]
Trial 3: rate = [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]
Dividing trial 3 by trial 1, we get;
(rate in trial 3) / (rate in trial 1) = ( [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex]) / ( [tex]K[A]^{X}[/tex][tex][B]^{y}[/tex])
0.0199 M/s / 0.0142 M/s = [tex]K[0.476 M]^{X}[/tex]''[[tex](0.200 M)^{y}[/tex]) / ( [tex]k(0.340 M)^{X}[/tex][tex](0.200 M)^{y}[/tex]
1.40 = (k''/k)[tex](0.476/0.340)^{X}[/tex]
Solving for x'', we get;
x'' = log(1.40) / log(0.476/0.340) = 0.83
Now that we have the values of x and y, we can solve for the rate constant k using trial 1;
0.0142 M/s = [tex]k(0.340 M)^{X}[/tex][tex](0.200 M)^{y}[/tex]
k = 0.0142 M/s / [tex]k(0.340 M)^{X}[/tex][tex](0.200 M)^{y}[/tex]
k = 0.0142 M/s / [tex](0.340 M)^{0.83}[/tex][tex](0.200 M)^{1.49}[/tex]
k = [tex]0.132 M^{-1.32}[/tex] s⁻¹.
Therefore, the rate constant is [tex]0.132 M^{-1.32}[/tex] s⁻¹.
To know more about rate constant here
https://brainly.com/question/31742254
#SPJ4
you eat a meal with 1200 kcals. there were 225 grams of cho in the meal. what percentage of the kcals came from cho?
Similar to a teaspoon or an inch, a calorie is a unit of measurement. Calories are the units of energy used by your body during food digestion and absorption. A food might provide your body extra energy if it has more calories. Here the percentage of kcals is 0.075%.
How many calories must one burn in order to lose one kilogramme is a common question among those who are losing weight or intend to do so. Studies show that in order to lose 1 kg of weight, 7700 calories must be burned, or 1000 calories equal 0.13 kg.
1g of meal provides 4 cal of energy
225 g = 900 cal
1cal=0.001Kcals, 900 cal = 0.9 kcals = 0.075 %
To know more about calories, visit;
https://brainly.com/question/13584986
#SPJ1
Calculate the freezing point of a 14.75 m aqueous solution of glucose. Freezing point constants can be found in the list of colligative constants.
The freezing point of a solution is lowered due to the presence of solute particles in the solution. This is a colligative property and can be calculated using the formula:ΔTf = Kf × m. Freezing point of a 14.75 m aqueous solution of glucose is -27.44 °C.
where ΔTf is the change in freezing point, Kf is the freezing point depression constant (in units of °C/m), and m is the molality of the solution (in units of moles of solute per kilogram of solvent).
For this problem, we are given that the solution contains glucose, which is a non-electrolyte, so the van't Hoff factor (i) is 1. Therefore, the molality (m) of the solution can be calculated as follows: m = (moles of solute) / (mass of solvent in kg)
We are given that the solution is 14.75 m, which means that it contains 14.75 moles of glucose per 1 kg of water. Now, we can use the freezing point depression constant for water, which is Kf = 1.86 °C/m, to calculate the change in freezing point: ΔTf = Kf × m = 1.86 °C/m × 14.75 m = 27.44 °C
The freezing point of pure water is 0 °C, so the freezing point of the solution will be:Freezing point = 0 °C - ΔTf = 0 °C - 27.44 °C = -27.44 °C. Therefore, the freezing point of a 14.75 m aqueous solution of glucose is -27.44 °C.
Know more about Freezing point here:
https://brainly.com/question/3121416
#SPJ11
. explain why s8 contains subgroups isomorphic to z15, u(16), and d8 .
Sulfur (S8) contains subgroups isomorphic to Z15, U(16), and D8 because it has a highly symmetric structure with multiple planes of reflection and rotation.
The S8 molecule has a ring structure with eight sulfur atoms arranged in a crown-like shape. Each sulfur atom forms two covalent bonds with neighboring sulfur atoms, forming a stable ring structure. This structure exhibits a high degree of symmetry, with multiple planes of reflection and rotation.
Due to its symmetry, the S8 molecule has subgroups that are isomorphic to Z15, U(16), and D8, which are mathematical groups that describe different types of symmetry. The Z15 subgroup describes the 15-fold symmetry of the S8 molecule, while the U(16) and D8 subgroups describe the rotational and reflectional symmetries of the molecule, respectively.
Understanding the symmetry properties of molecules is essential in chemistry and materials science, as it can provide insights into their physical and chemical properties. The symmetry of S8 makes it an interesting molecule to study, and its various subgroups offer a rich source of information about its structure and behavior.
To know more about the S8 molecule refer here :
https://brainly.com/question/1985124#
#SPJ11
select all the ways in which a stress may be applied to a system at equilibrium.
Stress can be applied to a system at equilibrium by changing the concentration, temperature, or pressure of the system.
A system at equilibrium is one in which the forward and reverse reactions are occurring at the same rate, and the concentrations of reactants and products remain constant.
Any change in the conditions of the system can cause a shift in equilibrium, resulting in changes in concentrations of reactants and products. There are several ways in which stress may be applied to a system at equilibrium.
One way to apply stress is by changing the concentration of one of the reactants or products. This can be done by adding or removing one of the substances from the system. If a reactant is added, the equilibrium will shift towards the products to consume the excess reactant. Similarly, if a product is removed, the equilibrium will shift towards the reactants to replenish the lost product.
Another way to apply stress is by changing the temperature of the system. This can be done by heating or cooling the system. An increase in temperature will cause the equilibrium to shift in the direction of the endothermic reaction, while a decrease in temperature will cause the equilibrium to shift towards the exothermic reaction.
A third way to apply stress is by changing the pressure of the system. This can be done by changing the volume of the container or by adding or removing a gas. An increase in pressure will cause the equilibrium to shift towards the side with fewer moles of gas, while a decrease in pressure will cause the equilibrium to shift towards the side with more moles of gas.
In summary, stress can be applied to a system at equilibrium by changing the concentration, temperature, or pressure of the system.
learn more about concentration
https://brainly.com/question/11850086
#SPJ11
Write balances molecular and net ionic equations for reactions of:A. Here is what they said the answer was for hydrochloric acid and nickel as a chemical equation2Hcl(aq)=Ni(s) arrowNiCl2(aq)+H2(g) NowWrite a net IONIC equation for hydrochloric acid and nickelExpress as a balanced new ionic equation - identify all phasesB. dilute sulfuric acid with ironExpress as a balanced chemical equation identify all phasesExpress as a balanced net ionic equation identify all phasesC. hydrobromic acid with magnesiumExpress as a balanced chemical equation identify all phasesExpress as a balanced net ionic equation edentify all phasesD. acetic acid, CH3COOH with zincExpress as a balanced chemical equation identify all phasesExpress as a balanced net ionic equation identify all phases
A. The balanced molecular equation for the reaction between hydrochloric acid (HCl) and nickel (Ni) is:
2 HCl(aq) + Ni(s) → NiCl2(aq) + H2(g)
The balanced net ionic equation for this reaction, focusing only on the species that undergo a chemical change, is:
2 H+(aq) + 2 Cl-(aq) + Ni(s) → Ni^2+(aq) + 2 Cl-(aq) + H2(g)
In the net ionic equation, the spectator ions (Cl-) are present on both sides and can be canceled out.
B. The balanced chemical equation for the reaction between dilute sulfuric acid (H2SO4) and iron (Fe) is:
H2SO4(aq) + Fe(s) → FeSO4(aq) + H2(g)
In this equation, sulfuric acid reacts with iron to form iron sulfate and hydrogen gas.
The balanced net ionic equation, focusing on the species undergoing a chemical change, is:
H+(aq) + Fe(s) → Fe^2+(aq) + H2(g)
Here, the sulfate ion (SO4^2-) from sulfuric acid is a spectator ion and does not participate in the overall reaction.
C. The balanced chemical equation for the reaction between hydrobromic acid (HBr) and magnesium (Mg) is:
2 HBr(aq) + Mg(s) → MgBr2(aq) + H2(g)
The reaction results in the formation of magnesium bromide and hydrogen gas.
The balanced net ionic equation, focusing on the species undergoing a chemical change, is:
2 H+(aq) + 2 Br-(aq) + Mg(s) → Mg^2+(aq) + 2 Br-(aq) + H2(g)
Here, the spectator ions are the bromide ions (Br-) present on both sides of the equation.
D. The balanced chemical equation for the reaction between acetic acid (CH3COOH) and zinc (Zn) is:
2 CH3COOH(aq) + Zn(s) → Zn(CH3COO)2(aq) + H2(g)
This reaction involves the formation of zinc acetate and hydrogen gas.
The balanced net ionic equation, focusing on the species undergoing a chemical change, is:
2 H+(aq) + 2 CH3COO-(aq) + Zn(s) → Zn^2+(aq) + 2 CH3COO-(aq) + H2(g)
The acetate ions (CH3COO-) are spectator ions and appear on both sides of the equation.
Learn more about chemical equation here : brainly.com/question/28792948
#SPJ11
What would you expect to see in the UV spectrum of the following molecule? OH A] Graph your answer and label absorption bands. [10 pts] Absorbance Wavelength B] How would the UV spectrum compare to that of ethylene?
When analyzing the UV spectrum of the molecule OH, we would expect to see absorption bands in the UV spectrum.
This is because UV spectroscopy works by measuring the amount of UV radiation that is absorbed by a molecule. When a molecule absorbs UV radiation, it undergoes an electronic transition from the ground state to an excited state, which causes the molecule to vibrate and rotate. The energy required for this transition is related to the wavelength of the UV radiation, and the absorption bands in the spectrum correspond to the wavelengths of the UV radiation that are absorbed by the molecule.
In the case of OH, we would expect to see absorption bands in the UV spectrum at wavelengths shorter than 200 nm. This is because the OH group is a strong absorber of UV radiation due to the presence of the lone pair of electrons on the oxygen atom. The exact position and intensity of the absorption bands will depend on the specific electronic transitions that occur in the molecule.
In terms of how the UV spectrum of OH compares to that of ethylene, we would expect to see some similarities and differences. Both molecules are capable of absorbing UV radiation, but the exact position and intensity of the absorption bands will depend on the specific electronic transitions that occur in each molecule. Additionally, the presence of different functional groups in each molecule can affect the position and intensity of the absorption bands.
To know more about UV spectrum visit:
https://brainly.com/question/28707354
#SPJ11
The value of the ionization constant, Ka, for hypochlorous acid, HOCI, is 3.1 x 10-8. (a) Calculate the hydronium ion concentration of a 0.050 molar solution of HOCI. (b) Calculate the concentration of hydronium ion in a solution prepared by mixing equal volumes of 0.050 molar HOCI and 0.020 molar sodium hypochlorite, NaOCI.
(a) Hydronium ion concentration of a 0.050 molar solution of HOCI is 1.4 x [tex]10^{-2}[/tex] mol/L. b) concentration of hydronium ion in the solution prepared by mixing equal volumes of 0.050 molar HOCI and 0.020 molar NaOCI is 1.1 x [tex]10^{-8}[/tex]mol/L.
The ionization reaction for hypochlorous acid is: HOCI (aq) + H2O (l) ⇌ H3O+ (aq) + OCI- (aq) The Ka expression is: Ka = [H3O+][OCI-]/[HOCI] We are given the value of Ka as 3.1 x [tex]10^{-8}[/tex]. Let x be the concentration of H3O+ and OCI- in mol/L at equilibrium. At equilibrium, the concentration of HOCI will be (0.050 - x) mol/L.
Substituting these values in the Ka expression, we get: 3.1 x [tex]10^{-8}[/tex] = [tex]x^2[/tex]/(0.050 - x) Solving this quadratic equation, we get x = 1.4 x [tex]10^{-4}[/tex] mol/L. Therefore, the hydronium ion concentration of a 0.050 molar solution of HOCI is 1.4 x [tex]10^{-4}[/tex] mol/L.
(b) When equal volumes of 0.050 molar HOCI and 0.020 molar NaOCI are mixed, the reaction between them can be represented as follows: HOCI (aq) + OCI- (aq) ⇌ OCl- (aq) + H2O (l)
The initial concentration of HOCI is 0.050/2 = 0.025 mol/L and that of OCI- is 0.020/2 = 0.010 mol/L. At equilibrium, let x be the concentration of OCl- in mol/L. The concentrations of HOCI and OCI- will be (0.025 - x) mol/L and (0.010 - x) mol/L, respectively. The equilibrium constant for this reaction can be written as:
K = [OCl-][H2O]/[HOCI][OCI-] The concentration of water is considered to be constant and is usually omitted. Substituting the concentrations at equilibrium in the above expression, we get: K = x/(0.025 - x)(0.010 - x)
The value of K is equal to the product of the ionization constants of HOCI and OCI-. Therefore, we can write: K = Ka(HOCI)Ka(OCI-) Substituting the values of Ka(HOCI) = 3.1 x 10 and Ka(OCI-) = Kw/Ka(HOCI) = 3.2 x [tex]10^{-6}[/tex], where Kw is the ion product constant of water, we get:
[tex]3.1 x 10^{-8} x 3.2 . 10^{-6} = x/(0.025 - x)(0.010 - x)[/tex]
Solving this equation, we get x = 1.1 x [tex]10^{-8}[/tex] mol/L. Therefore, the concentration of hydronium ion in the solution prepared by mixing equal volumes of 0.050 molar HOCI and 0.020 molar NaOCI is 1.1 x [tex]10^{-8}[/tex]mol/L.
Know more about ionization reaction here:
https://brainly.com/question/27549438
#SPJ11
calculate the mass, in grams, of solute present in 478 mg of 12.5 mmonium nitrate solution.
The mass of solute present can be calculated using the formula mass of solute (in grams) = concentration (in mol/L) x volume (in L) x molar mass (in g/mol)
First, we need to convert the given mass of solution (478 mg) to volume, assuming a density of 1 g/mL:
volume = mass / density = 478 mg / 1000 mg/mL = 0.478 mL
Next, we need to convert the concentration from molarity (mol/L) to molality (mol/kg) by taking into account the mass of the solvent (water). Assuming the density of water is 1 g/mL:
mass of water = volume of solution x density of water = 0.478 mL x 1 g/mL = 0.478 g
molality = concentration / (1 + (mass of solute / mass of water))
= 12.5 / (1 + (0.478 g / 80 g))
= 0.150 mol/kg
Finally, we can calculate the mass of solute using the molality and mass of water:
mass of solute = molality x mass of water = 0.150 mol/kg x 0.478 kg = 0.072 g or 72 mg.
Learn more about mass of solute here;
https://brainly.com/question/29482678
#SPJ11
Help please i’m not sure if i got these right!! This is due today please and thank you!
Oxygen is far from being solid and liquid. It is in a gaseous state. The constituent particles of a solid are tightly packed together in this state of matter. A solid can contain atoms, volume, ions, and other constituent particles.
A liquid is a nearly incompressible fluid that maintains a nearly constant volume regardless of pressure and conforms to the shape of its container. A substance in its gaseous, or vaporous, state is called a gas. When referring to matter with the properties of a gaseous substance, the term "gas" also refers to the state itself.
Learn more about states of matter, here:
https://brainly.com/question/29476563
#SPJ1
when comparing the dissolution of agbr by na2s2o3 to the dissolution of agcl by nh3, given the ksp values for agbr(5.0×10−13) and agcl(1.8×10−10), which of the following is true?
More Agt resulting from the dissolution of AgBr will be present in solution at any given time, because Ksp, Agbr > Ksp, Agcl More Agt resulting from the dissolution of AgBr will be present in solution at any given time, because Ksp, AgBr < Ksp, Agcl
More Agt resulting from the dissolution of AgCl will be present in solution at any given time, because Ksp, Agbr > Ksp, Agcl
More Agt resulting from the dissolution of AgCl will be present in solution at any given time, because Kyp, AgBr
When comparing the dissolution of AgBr by[tex]Na_{2}S_{2}O_{3}[/tex] to the dissolution of AgCl by NH3, the statement "More Ag+ resulting from the dissolution of AgBr will be present in solution at any given time, because Ksp, AgBr > Ksp, AgCl" is true.
The solubility product constant (Ksp) represents the equilibrium constant for the dissolution of a sparingly soluble salt. It indicates the extent to which a salt dissolves in a solvent. In this case, the Ksp values for AgBr and AgCl are given as 5.0×10−13 and 1.8×10−10, respectively.
A higher Ksp value indicates a higher solubility of the salt and a greater concentration of the dissolved ions in the solution. Since Ksp for AgBr is smaller than Ksp for AgCl, it means that AgCl is more soluble than AgBr. Therefore, more Ag+ ions resulting from the dissolution of AgBr will be present in solution at any given time compared to AgCl.
Hence, the correct statement is "More Ag+ resulting from the dissolution of AgBr will be present in solution at any given time, because Ksp, AgBr > Ksp, AgCl."
Learn more about solubility product constant here:
https://brainly.com/question/1419865
#SPJ11
If the density of solid tungsten is 19.3 g/cm3 , what is the packing efficiency of w if it adopts a body‑centered cubic unit cell? the molar mass of w is 183.84 g/mol?
The packing efficiency of solid tungsten in a body-centered cubic unit cell is approximately 40.69%.
To calculate the packing efficiency of solid tungsten in a body-centered cubic (BCC) unit cell, we can use the following steps:
Calculate the atomic radius (r) using the density (ρ) and molar mass (M) of tungsten:
r = (3M / 4πρ)^(1/3)
Calculate the length of one side of the unit cell (a):
a = 4r / √3
Calculate the volume of the unit cell (V_unit cell):
V_unit cell = a^3
Calculate the volume of a single tungsten atom (V_single atom):
V_single atom = (4/3)πr^3
Calculate the volume of the atoms within the unit cell (V_atoms):
V_atoms = 2 * V_single atom
Calculate the packing efficiency (PE):
PE = V_atoms / V_unit cell
Now let's perform the calculations using the given values:
Calculate the atomic radius (r):
r = (3 * 183.84 g/mol) / (4π * 19.3 g/cm^3)^(1/3)
r ≈ 0.1372 nm
Calculate the length of one side of the unit cell (a):
a = 4r / √3
a ≈ 0.3993 nm
Calculate the volume of the unit cell (V_unit cell):
V_unit cell = a^3
V_unit cell ≈ 0.0637 nm^3
Calculate the volume of a single tungsten atom (V_single atom):
V_single atom = (4/3)πr^3
V_single atom ≈ 0.0129 nm^3
Calculate the volume of the atoms within the unit cell (V_atoms):
V_atoms = 2 * V_single atom
V_atoms ≈ 0.0259 nm^3
Calculate the packing efficiency (PE):
PE = V_atoms / V_unit cell
PE ≈ 0.4069 or 40.69%
Therefore, the packing efficiency of solid tungsten in a body-centered cubic unit cell is approximately 40.69%.
To learn more about volume, refer below:
https://brainly.com/question/1578538
#SPJ11
what is the molar solubility of caf2 in a solution containing 0.100 m naf?
The molar solubility of the CaF₂ in the solution containing the 0.100 M NaF is the 4 × 10².
The chemical equation for the dissociation is :
CaF₂ ⇌ Ca₂⁺ + 2F⁻
Where,
The 1 mole of the Calcium ion and 2 moles of the fluorine ion :
The equation is :
NaF ⇌ Na⁺ + F⁻
Where,
Na⁺ = 0.100 M
F⁻ = 0.100 M
The Ksp value of CaF₂ = 4.0 x 10⁻¹¹
The molar solubility is expressed as :
Ksp = (Ca₂⁺)(F⁻)²
Ksp = (Ca₂⁺) (0.100)²
4.0 × 10⁻¹¹ = (0.100)² × (Ca₂⁺)
4.0 × 10⁻¹¹ = 0.01 (Ca₂⁺)
(Ca₂⁺) = 4.0 × 10⁻¹¹ / 0.01
(Ca₂⁺) = 400
(Ca₂⁺) = 4 × 10²
The molar solubility of the CaF₂ is 4 × 10².
To learn more about molar solubility here
https://brainly.com/question/9977827
#SPJ4
Consider the furan-maleic anhydride Diels-Alder adduct. The melting point for the endo-Diels-Alder adduct of furan and maleic anhydride is reported to be 70∘C. The melting point for the exo-Diels- Alder adduct is reported to be 110∘C.
a. What isomer is obtained in the synthesis?
b. Mp of product = _____
c. Is the Product ENDO or EXO? (circle one).
d. Considering that formation of the endo-adduct is kinetically favored in Diels-Alder reactions, how is the result explained?
In the synthesis of the furan-maleic anhydride Diels-Alder adduct, the isomer obtained is the endo-Diels-Alder adduct.
The melting point (Mp) of the product is 70°C. The product is ENDO.
The endo-Diels-Alder adduct is formed as the major product in the reaction due to its kinetically favored formation. This is because the transition state for the endo-adduct formation is lower in energy than the exo-adduct, leading to a faster reaction and higher yield of the endo product.
Even though the endo-adduct is kinetically favored in Diels-Alder reactions, the exo-adduct has a higher melting point (110°C) compared to the endo-adduct (70°C). This can be attributed to the better packing and stronger intermolecular forces present in the crystalline structure of the exo-adduct, making it more thermodynamically stable. However, as the question is focused on the synthesis, the obtained product is the endo-adduct due to its kinetically favored formation.
To know more about furan-maleic visit:
https://brainly.com/question/31386802
#SPJ11
Magnesium hydroxide [Mg(OH)2] is an ingredient in some antacids. How many grams of Mg(OH)2 are needed to neutralize the acid in 158 mL of 0. 106 M HCl(aq)? It might help to write the balanced chemical equation first
0.488 grams of [tex]Mg(OH)_2[/tex] are needed to neutralize the acid in 158 mL of 0.106 M HCl(aq).
The balanced chemical equation for the reaction between magnesium hydroxide and hydrochloric acid is:
[tex]$\text{Mg(OH)}{2}(s) + 2\text{HCl(aq)} \rightarrow \text{MgCl}{2}(aq) + 2\text{H}_{2}\text{O}(l)$[/tex]
From the equation, we can see that 1 mole of [tex]Mg(OH)_2[/tex] reacts with 2 moles of HCl.
To determine how many grams of [tex]Mg(OH)_2[/tex] are needed to neutralize the acid in 158 mL of 0.106 M HCl(aq), we can use the following steps:
Calculate the number of moles of HCl in 158 mL of 0.106 M HCl(aq):
[tex]$0.106 \text{ M} = \dfrac{\text{moles of HCl}}{1 \text{ L}}$[/tex]
[tex]$\text{moles of HCl} = 0.106 \text{ M} \times 0.158 \text{ L} = 0.016748 \text{ mol}$[/tex]
Determine the number of moles of [tex]Mg(OH)_2[/tex] required to react with the HCl:
From the balanced chemical equation, we know that 1 mole of [tex]Mg(OH)_2[/tex] reacts with 2 moles of HCl. Therefore, the number of moles of [tex]Mg(OH)_2[/tex] required to react with 0.016748 moles of HCl is:
[tex]$\text{moles of Mg(OH)}_{2} = \dfrac{0.016748 \text{ mol HCl}}{2} = 0.008374 \text{ mol}$[/tex]
Calculate the mass of [tex]Mg(OH)_2[/tex] required using its molar mass:
The molar mass of [tex]Mg(OH)_2[/tex] is:
[tex]$\text{Mg} = 24.31 \text{ g/mol}$[/tex]
[tex]$\text{O} = 16.00 \text{ g/mol}$[/tex]
[tex]$\text{H} = 1.01 \text{ g/mol}$[/tex]
Molar mass of [tex]Mg(OH)_2[/tex] = [tex]$\text{Mg} + 2\text{O} + 2\text{H} = 58.33 \text{ g/mol}$[/tex]
Therefore, the mass of [tex]Mg(OH)_2[/tex] required is:
mass of [tex]Mg(OH)_2[/tex] = [tex]\text{moles of Mg(OH)}{2} \times \text{molar mass of Mg(OH)}_{2}$[/tex]
mass of [tex]Mg(OH)}_{2} = 0.008374 \text{ mol} \times 58.33 \text{ g/mol} = 0.488 \text{ g}$[/tex]
So, 0.488 grams of [tex]Mg(OH)_2[/tex] are needed to neutralize the acid in 158 mL of 0.106 M HCl(aq).
To learn more about magnesium hydroxide
https://brainly.com/question/21904397
#SPJ4
1) Under what metabolic condition is pyruvate converted to Acetyl - COA [1] 2) Write a chemical equation for the production of Acetyl-COA from Pyruvate. Under what conditions does this reaction occur? [6] 3) To what metabolic intermediate is the acetyl group of Acetyl-COA transferred in the Citric Acid Cycle? [2] 4) To what final products is the acetyl group of the Acetyl-CoA converted [5]
1) Pyruvate is converted to Acetyl - COA under aerobic conditions in the presence of oxygen, as part of the process of cellular respiration.
2) The chemical equation for the production of Acetyl-COA from Pyruvate is:
Pyruvate + CoA + NAD⁺ → Acetyl-CoA + CO₂ + NADH + H⁺. This reaction occurs in the mitochondria of eukaryotic cells, and in the cytoplasm of prokaryotic cells.
3) The acetyl group of Acetyl-COA is transferred to oxaloacetate to form citrate, which is the first intermediate of the Citric Acid Cycle.
4) The acetyl group of the Acetyl-CoA is converted to CO₂ and H₂O as part of the Citric Acid Cycle, which generates ATP and other energy-rich molecules. The final products of the Citric Acid Cycle include ATP, NADH, FADH₂, and CO₂.
To know more about cellular respiration, visit:
https://brainly.com/question/29760658
#SPJ11
Calculate the number of grams of 4.9 % (m/m) NaCl solution that contains 7.10 g of NaCl Express your answer to two significant figures and include the appropriate units.
The mass of the 4.9% (m/m) NaCl solution that contains 7.10 g of NaCl is 145 g.
How many grams of the 4.9% (m/m) NaCl solution contains 7.10 g of NaCl?
In order to calculate the mass of the NaCl solution, we need to consider the concentration of the solution, which is given as 4.9% (m/m). This means that there are 4.9 grams of NaCl for every 100 grams of the solution.
To find the mass of the NaCl solution, we can set up a proportion based on the given information:
(4.9 g NaCl / 100 g solution) = (7.10 g NaCl / x g solution)
Cross-multiplying and solving for x, we can calculate the mass of the solution:
x = (7.10 g NaCl) * (100 g solution) / (4.9 g NaCl)x ≈ 145 gTherefore, approximately 145 grams of the 4.9% (m/m) NaCl solution contain 7.10 g of NaCl.
Learn more about mass
brainly.com/question/11954533
#SPJ11
explain why the reaction was performed under nitrogen when the product is not air sensitive.
There are several reasons why a reaction may be performed under a nitrogen atmosphere even if the final product is not air-sensitive :-
1.To exclude oxygen and moisture :- Oxygen and moisture can react with some chemicals and cause unwanted side reactions or decrease the yield of the desired product.
By performing the reaction under a nitrogen atmosphere, these reactive species are excluded from the reaction vessel, thereby increasing the purity of the final product.
2. To prevent oxidation or reduction :- Some chemical reactions are sensitive to oxidation or reduction. Performing the reaction under nitrogen can prevent these unwanted reactions from occurring.
3.To prevent contamination: Nitrogen is an inert gas and does not react with most chemicals. By using nitrogen, the risk of contamination from other gases in the atmosphere is reduced.
4. To maintain a constant atmosphere: When working with sensitive or reactive chemicals, it is important to maintain a constant atmosphere. By using nitrogen, the atmosphere in the reaction vessel can be controlled and maintained throughout the reaction, ensuring consistent conditions for the reaction.
Overall, performing a reaction under a nitrogen atmosphere can improve the yield and purity of the desired product, reduce unwanted side reactions, and provide a controlled environment for the reaction to take place.
TO know more about nitrogen refer here :-
https://brainly.com/question/19938608#
#SPJ11