Which of these statements is true about the effect of a force exerted upon an object?
A. A large force always produces a large change in the object’s momentum.
B. A small force always produces a large change in the object’s momentum.
C. A small force applied over a long time interval can produce a large change in the object’s momentum.
D. A large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.

Answers

Answer 1

Answer:

D. A large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.

Explanation:

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

[tex] Momentum = mass * velocity [/tex]

Also, the impulse of an object is given by the formula;

[tex] Impulse = force * time [/tex]

In accordance with the impulse-momentum theorem, the statement which is true about the effect of a force exerted upon an object is that a large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.


Related Questions

If a person walks 3 m north and 5 meters east, how would you find the displacement for that person? what would the displacement be?​

Answers

Answer:

AC)=(AB)2+(BC)2−−−−−−−−−−−−√=42+32−−−−−−√

⇒displacement=16+9−−−−−√=25−−√=5m

A flat loop of wire consisting of a single turn of cross-sectional area 8.80 cm2 is perpendicular to a magnetic field that increases uniformly in magnitude from 0.500 T to 1.80 T in 1.10 s. What is the resulting induced current if the loop has a resistance of 2.20

Answers

Answer:

The magnitude of the induced current is 4.73 x 10⁻³ A.

Explanation:

Given;

number of turns, N = 1

cross sectional area of the loop, A = 8.8  cm² = 8.8 x 10⁻⁴ m²

change in magnetic field strength, ΔB = 1.8 T -  0.5 T = 1.3 T

change in time, Δt = 1.10 s

resistance of the loop, R = 2.2 ohm

The magnitude of the induced emf is calculated as;

[tex]emf = \frac{NA \Delta B}{\Delta t} \\\\emf = \frac{1 \times 8.8\times 10^{-4} \times 1.3}{1.10} \\\\emf = 1.04 \times 10^{-3} \ V[/tex]

The induced current in the loop is calculated as;

[tex]I = \frac{emf}{R} \\\\I = \frac{1.04 \times 10^{-3}}{2.2} \\\\I= 4.73 \times 10^{-4} \ A[/tex]

Therefore, the magnitude of the induced current is 4.73 x 10⁻³ A

A transverse wave is represented below. 1.5 m 0.20 m What is the approximate amplitude and wavelength of the wave? amplitude = 0.20 m, wavelength = 0.60 m B. amplitude = 0.20 m, wavelength = 0.30 m C. amplitude = 0.10 m, wavelength = 0.60 m OO amplitude = 0.10 m, wavelength = 0.30 m​

Answers

Answer:

C. amplitude = 0.10 m, wavelength = 0.60 m

Explanation:

The diagram shows an oscillating progressive wave, with its amplitude and wavelength.

Amplitude of a wave is the maximum distance covered either upward or downward.

So that,

amplitude of the wave, A = [tex]\frac{0.2}{2}[/tex]

                                          = 0.1

Amplitude of the wave = 0.1 m

Wavelength in this case is the distance from crest to crest, or trough to trough of the wave.

So that,

wavelength = [tex]\frac{1.5}{2.5}[/tex]

                   = 0.6

wavelength of the wave = 0.6 m

Therefore, the amplitude of the wave is 0.10 m, while the wavelength is 0.60 m.

Physics gravity question, Please help

Answers

Answer: 2.7 x10^-4 N

Explanation: 6.674 ×10^-11 × 1000 x 1000 divided by 0.5 squared.

A 12.0 V storage battery is connected to three
resistors, 4.75, 14.0 and 21.0, respectively. The resistors are joined in series.

(a)Calculate the equivalent resistance.
(b)What is the current in the circuit?
Answer in units of A.

Answers

(a).  The equivalent resistance of a series circuit is the SUM of the individual resistances in the circuit.

(4.75Ω + 15Ω + 21Ω )  =  39.75Ω

(b). Current = (voltage) / (resistance)

Current = (12 v) / (39.75Ω)

Current = 0.302 Amperes (rounded to the nearest MilliAmpere))

what are three physical properties of gases

Answers

Answer:   Gases have three characteristic properties: (1) they are easy to compress, (2) they expand to fill their containers, and (3) they occupy far more space than the liquids or solids from which they form. An internal combustion engine provides a good example of the ease with which gases can be compressed.

Explanation:

How fast is a ball going when it hits the ground after being dropped from a
height of 16 m? The acceleration of gravity is 9.8 m/s2
A. 22.5 m/s
B. 28.1 m/s
O C. 17.7 m/s
D. 19.3 m/s

Answers

Hi there!

[tex]\large\boxed{\text{C. 17.7m/s}}[/tex]

Use the following kinematic equation to solve:

vf² = vi² + 2(ad)

Since the initial velocity is 0 m/s because it started at rest, we can eliminate this part of the equation:

vf² = 2ad

Plug in the given acceleration and distance:

vf² = 2(9.8)(16)

vf ≈ 17.7. The correct answer is C.

The course an object travels along is called DIRECTION.

A
TRUE

B
FALSE

DO NOT WRITE DOWN NONSENSE OR YOU WILL BE REPORTED!!!!!!!!

Answers

False I’m pretty sure sorry if I’m wrong !!

While sitting in a boat, a fisherman observes that 2 complete waves pass by his position every 4 seconds. What is the period of these waves?A)2s B)8s C) 0.5 s D) 4s​

Answers

Answer:

2

Explanation:

Because 2 waves 4 secs means 1 in 2s

The period of these waves is 2s. and The right option is A)2s.

The period of a wave is the time taken by a wave to complete one cycle.

The formula of period from the question is given below.

⇒ Formula:

T = t/2.................... Equation 1

⇒ Where:

T  = Period of the wavet = time taken for two complete oscillation

From the question,

⇒ Given:

t = 4 seconds.

⇒ Substitute these value above into equation 1

T = 4/2T = 2 seconds.

Hence, The period of these waves is 2s.

The right option is A)2s

Learn more about period here: https://brainly.com/question/22059232

An object is moving with constant non-zero velocity. Which of thw following statements about it must be true

Answers

Answer:

The net force on the object is zero.

Explanation:

An object is moving with constant non-zero velocity. If velocity is constant, it means that the change in velocity is equal to 0. As a result, acceleration of the object is equal to 0. Net force is the product of mass and acceleration. Hence, the correct option is (d) "The net force on the object is zero".

Plsss I want answer???

Answers

Answer:

s=136.89/2g meter

s=6.98 meter (correct to 3 sig.fig. taking g=9.81ms^-2)

Explanation:

u= + 11.7 ms^-1

a= - g ms^-2

At highest point: v=0ms^-1

v^2=u^2+2as

0=11.7^2+2(-g)s

s=136.89/2g meters

What happens when a moving object experiences no net force?

Answers

Answer:

An object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity. Forces are "pushes" or "pulls" on the object, and forces, like velocity and acceleration are vector quantities.

What factors determine electric potential?
A. Mass and distance
B. Charge and density
C. Charge and distance
O D. Mass and charge

Answers

Answer: C. Charge and distance

A scientist plans to release a weather balloon from ground level, to be used for high-altitude atmospheric measurements. The balloon is spherical, with a radius of 2.10 m, and filled with hydrogen. The total mass of the balloon (including the hydrogen within it) and the instruments it carries is 24.0 kg. The density of air at ground level is 1.29 kg/m3. (a) What is the magnitude of the buoyant force (in N) acting on the balloon, just after it is released from ground level

Answers

Answer:

Fb = 490.4 N

Explanation:

According to Archimedes' principle, any object submerged in a fluid, receives a push upward (which we call buoyant force) equal to the weight of the volume of the fluid removed by the object.We can express this force (Fb), in terms of the density and the volume of the fluid, as follows:

       [tex]F_{b} = \rho * V * g (1)[/tex]

The volume removed from the fluid by the balloon is just the volume of  the balloon, assuming that it is a perfect sphere, as follows:

       [tex]V = \frac{4}{3}*\pi * R^{3} = \frac{4}{3} *\pi *(2.1m)^{3} = 38.8 m3 (2)[/tex]

Replacing by the givens and (2) in (1), we get:

       [tex]F_{b} = \rho * V * g = 1.29 kg/m3* 38.8m3*9.8m/s2 = 490.4 N (3)[/tex]

In a mass spectrometer, a specific velocity can be selected from a distribution by injecting charged particles between a set of plates with a constant electric field between them and a magnetic field across them (perpendicular to the direction of particle travel). If the fields are tuned exactly right, only particles of a specific velocity will pass through this region undeflected. Consider such a velocity selector in a mass spectrometer with a 0.105 T magnetic field.
Part (a) What electric field strength, in volts per meter, is needed to select a speed of 3.8 × 106 m/s?
Part (b) What is the voltage, in kilovolts, between the plates if they are separated by 0.75 cm?

Answers

Answer:

a).[tex]$3.99 \times 10^5 \ v/m$[/tex]

b). 2.9925 kV

Explanation:

Given :

For mass spectrometer

The magnetic field = B

B = 0.105 T

a).  Given speed, v = [tex]$3.8 \times 10^6 \ m/s$[/tex]

We known

[tex]$\frac{E}{B}=v$[/tex]

∴ [tex]$E= 3.8 \times 10^6 \times 0.105$[/tex]

      [tex]$=3.99 \times 10^5 \ v/m$[/tex]

b). Now spectrometer, d = 0.75 cm

                                      [tex]$d=0.75 \times 10^{-2} \ m$[/tex]

We known

[tex]$E=\frac{V}{d}$[/tex]

[tex]$V = E\times d$[/tex]

[tex]$V = 3.99 \times 10^5 \times 0.75 \times 10^{-2}$[/tex]

[tex]$V = 2.9925 \times 10^3 \ V$[/tex]

   = 2.9925 kV

 

How does the current in a series circuit compare

Answers

The amount of current is the same through any component in a series circuit. Resistance: The total resistance of any series circuit is equal to the sum of the individual resistances. Voltage: The supply voltage in a series circuit is equal to the sum of the individual voltage drops.

In a transverse wave, the distance from any two consecutive crest or any two consecutive troughs is called the

Answers

Answer:

Wavelength

Explanation:

Answer:

Wavelength if it's the horizontal distance. Wave Height if it's vertical distance.

Explanation:

Identify two technologies that can be used to find the locations of objects. Identify the type or types of waves each
technology uses.

Answers

GPS is a technology that finds objects and uses radio waves
X-rays use electromagnetic waves

Which of the following is a contact force?


Magnetic

Friction

Electric

Gravity

Answers

Answer:

magnetic

Explanation:

because magnetic attracted other magnetic by pulling them contact forcely that creates a strong force when they are nearly close to one another

An object is experiencing an acceleration of 0.4 m/s^2 while traveling in a circle of 35 m. What is it’s velocity?

Answers

Answer:

v = 3.74 m/s

Explanation:

Given that,

The acceleration of the object in circular path, a = 0.4 m/s²

The radius of the circle, r = 35 m

We need to find the velocity of the object. The acceleration of an object on the circular path is given by :

[tex]a=\dfrac{v^2}{r}\\\\v=\sqrt{ar} \\\\v=\sqrt{0.4\times35}\\\\v=3.74\ m/s[/tex]

So, the velocity of the object is equal to 3.74 m/s.

why type of volcano is built almost entirely from ejected lava fragments

Answers

Answer:

Shield volcanoes

Explanation:

As dancers twirl faster and faster around their partners, they are demonstrating what type of energy?
A. Binding energy,
B. Nuclear energy,
C. Kinetic energy,

Answers

Your answer would be Kinetic energy

I'm asking for a quick favor. I'm trying to understand an equation that has to do with Projectile motion, Bernoulli's principle, and Magnus Effect. Basically focused on understanding air resistance on a projectile. I would like to discuss this privately rather than have it on this public forum. I'll give you 100 of my points if you help.

Answers

Explanation:

Projectile motion, Bernoulli's principle, and Magnus Effect.

Sure I would be happy to discuss projectile motion!

I'll do it if you mark brainliest :) I need the points thanks

Which of the following best describes the location of the
mantle?
A
Above the crust
B
Between the crust and the lithosphere
С
Between the crust and the core
D
Beneath the core

Answers

Answer:

The mantle exists above the crust of the earth

Due to historical difficulty in delivering supplies by plane, one of your colleagues has suggested you develop a catapult for slinging supplies to affected areas, similar to the electromagnetic lift catapults used to launch planes from aircraft carriers. This catapult is located at a fixed point 400 meters away and 50 meters below the target site. The catapult is capable of launching the payload at 67 meters per second and an initial launch angle of 50 degrees. Using your knowledge of kinematics equations, determine whether this would be sufficient to deliver the payload to the drop site.

Answers

Answer:

Please see below as the answer is self-explanatory.

Explanation:

We can take the initial velocity vector, which magnitude is a given (67 m/s) and project it along two directions perpendicular each other, which we choose horizontal (coincident with x-axis, positive to the right), and vertical (coincident with y-axis, positive upward).Both movements are independent each other, due to they are perpendicular.In the horizontal direction, assuming no other forces acting, once launched, the supply must keep the speed constant.Applying the definition of cosine of an angle, we can find the horizontal component of the initial velocity vector, as follows:

       [tex]v_{avgx} = v_{o}*cos 50 = 67 m/s * cos 50 = 43.1 m/s (1)[/tex]

Applying the definition of average velocity, since we know the horizontal distance to the target, we can find the time needed to travel this distance, as follows:

       [tex]t = \frac{\Delta x}{v_{avgx} } = \frac{400m}{43.1m/s} = 9.3 s (2)[/tex]

In the vertical direction, once launched, the only influence on the supply is due to gravity, that accelerates it with a downward acceleration that we call g, which magnitude is 9.8 m/s2.Since g is constant (close to the Earth's surface), we can use the following kinematic equation in order to find the vertical displacement at the same time t that we found above, as follows:

       [tex]\Delta y = v_{oy} * t - \frac{1}{2} *g*t^{2} (3)[/tex]

In this case, v₀y, is just the vertical component of the initial velocity, that we can find applying the definition of the sine of an angle, as follows:

       [tex]v_{oy} = v_{o}*sin 50 = 67 m/s * sin 50 = 51.3 m/s (4)[/tex]

Replacing in (3) the values of t, g, and v₀y, we can find the vertical displacement at the time t, as follows:

       [tex]\Delta y = (53.1m/s * 9.3s) - \frac{1}{2} *9.8m/s2*(9.3s)^{2} = 53.5 m (5)[/tex]

Since when the payload have traveled itself 400 m, it will be at a height of 53.5 m (higher than the target) we can conclude that the payload will be delivered safely to the drop site.

Object A is moving due east, while object B is moving due north. They collide and stick together in a completely inelastic collision. Momentum is conserved. Object A has a mass of m A = 17.0 kg and an initial velocity of v 0A = 8.00 m/s, due east. Object B, however has a mass of m B = 29.0 kg and an initial velocity of v 0B = 5.00 m/s, due north. Find the magnitude and direction of the total momentum of the two-object system after the collision.

Answers

Answer:

pf = 198.8 kg*m/s

θ = 46.8º N of E.

Explanation:

Since total momentum is conserved, and momentum is a vector, the components of the momentum along two axes perpendicular each other must be conserved too.If we call the positive x- axis to the W-E direction, and the positive y-axis to the S-N direction, we can write the following equation for the initial momentum along the x-axis:

       [tex]p_{ox} = p_{oAx} + p_{oBx} (1)[/tex]

We can do exactly the same for the initial momentum along the y-axis:

       [tex]p_{oy} = p_{oAy} + p_{oBy} (2)[/tex]

The final momentum along the x-axis, since the collision is inelastic and both objects stick together after the collision, can be written as follows:

       [tex]p_{fx} = (m_{A} + m_{B} ) * v_{fx} (3)[/tex]

We can repeat the process for the y-axis, as follows:

       [tex]p_{fy} = (m_{A} + m_{B} ) * v_{fy} (4)[/tex]

Since (1) is equal to (3), replacing for the givens, and since p₀Bₓ = 0, we can solve for vfₓ as follows:

       [tex]v_{fx} = \frac{p_{oAx}}{(m_{A}+ m_{B)}} = \frac{m_{A}*v_{oAx} }{(m_{A}+ m_{B)}} =\frac{17.0kg*8.00m/s}{46.0kg} = 2.96 m/s (5)[/tex]

In the same way, we can find the component of the final momentum along the y-axis, as follows:

       [tex]v_{fy} = \frac{p_{oBy}}{(m_{A}+ m_{B)}} = \frac{m_{B}*v_{oBy} }{(m_{A}+ m_{B)}} =\frac{29.0kg*5.00m/s}{46.0kg} = 3.15 m/s (6)[/tex]

With the values of vfx and vfy, we can find the magnitude of the final speed of the two-object system, applying the Pythagorean Theorem, as follows:

      [tex]v_{f} = \sqrt{v_{fx} ^{2} + v_{fy} ^{2}} = \sqrt{(2.96m/s)^{2} + (3.15m/s)^{2}} = 4.32 m/s (7)[/tex]

The magnitude of the final total momentum is just the product of the combined mass of both objects times the magnitude of the final speed:

       [tex]p_{f} = (m_{A} + m_{B})* v_{f} = 46 kg * 4.32 m/s = 198.8 kg*m/s (8)[/tex]

Finally, the angle that the final momentum vector makes with the positive x-axis, is the same that the final velocity vector makes with it.We can find this angle applying the definition of tangent of an angle, as follows:

       [tex]tg \theta = \frac{v_{fy}}{v_{fx}} = \frac{3.15 m/s}{2.96m/s} = 1.06 (9)[/tex]

       ⇒ θ = tg⁻¹ (1.06) = 46.8º N of E

What us a magnetic domain?​

Answers

magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction.

An object is spun in a circle of radius 1.5m with a frequency of 6.0Hz. what is it’s velocity ?

Answers

Answer:

56.55 m/s

Explanation:

Frequency=1/T

1/6 = 0.1666666

V=(2*pi*1.5)/0.166666

How is it difficult to perform electrostatic experiments on humid days​

Answers

Answer:

that should be the right answer

In 1666 at the age of 23, what scientist
developed the theories of gravitation inspired
by an apple falling from a tree?

A. Galileo Galilei
B. Issac Newton
C. Albert Einstein
D. Nicolaus Copernicus

Answers

Answer:

B - Isaac Newton

Explanation:

He first thought of his system of gravitation which he hit upon by observing an apple fall from a tree,

The incident occurring in the late summer of 1666.

Other Questions
Draw an annotated diagram and explain the meaning of the expression (especially the missing number) in terms of the situation. 12 divided by 4 plsss help meeeeeeeee TRIANGLE SIMILARITY! pic included *** 8. In the RICE model, what does Rest mean? using a sling or crutches to allow the injured limb to healno exercise or weight-bearing on the affected limbtotal bed restlight exercise or activity that uses the affected muscle without causing discomfort A right triangle and two of its side lengths are shown in the diagram.39 cm12 cmx cmWhich measurement is closest to the value of x in centimeters? calculates the length of the x-segment in the following figure who can help me pls Please helppp i will ly 4ever (with both) Conflict can have a ripple effect touching others who are not directly engage in the conflictTrue or false an air craft heads north at 320km/hr relative to the wind. The wind velocity is 80km/hr from the north. Find the velocity of the air craft relative to the ground CHRISTIANS!! If your child came out as gay, would you accept it and kindly disagree? What would you do? The graph of quadratic parent function f was transformed to create the graph of g(x) = f(x + 2) - 5. Which graph best represents g? Which of the following is not a function of the bacterial cell wall?A. Provide the cell with shape and rigidityB. Prevent the cell from lysingC. Protect the cellD. Provide the cell with locomotion Write three points about why driverless cars are a good idea. Use complete sentences and text evidence.Explain Your Answer. Which statement best explains the legal basis for the right to privacy?It was a new theory proposed by activist justices in the 1960s.It developed gradually through legal precedents and Supreme Court rulings.It is clearly named in the amendment forbidding search and seizure.It evolved as protection from the invasive technologies of the twentieth century. Does distance play a role in the magnetic field ? What are some ways we can stop global warming in the arctic?Help! Will mark BRAINLIEST. MolarityPlease no Bs answers. Only going to be reported. If water is added to 145 mL of a 0.55 M KOH solution until the volume is 250 mL, what will the molarity of the diluted solution be?What is the molarity of the solution that results from diluting 35.0 ml of a 9.02M solution to a new volume of 45.0 ml? explain the purpose and function of the shabits. Can someone help me please PLEASE HELP!!!?!?!!!?!?what is 4 .5 + 1/2 ?