why blood is separated into different parts​

The mass of ammonia prepared from 24.5 kg magnesium nitride, according to the reaction Mg₃N₂(s) + 6H₂O(l) → 3Mg(OH)₂(s) + 2NH₃(g), knowing that the process is 71% efficient is 5.87 kg.

The balanced reaction of production of ammonia is:

Mg₃N₂(s) + 6H₂O(l) → 3Mg(OH)₂(s) + 2NH₃(g)   (1)

First, let's find the number of moles of magnesium nitride

[tex] n_{Mg_{3}N_{2}} = \frac{m_{Mg_{3}N_{2}}}{M_{Mg_{3}N_{2}}} [/tex]  (2)

Where:

[tex]m_{Mg_{3}N_{2}}[/tex]: is the mass of Mg₃N₂ = 24.5 kg

[tex]M_{Mg_{3}N_{2}}[/tex]: is the molar mass of Mg₃N₂ = 100.9494 g/mol

The number of moles is (eq 2):

[tex] n_{Mg_{3}N_{2}} = \frac{m_{Mg_{3}N_{2}}}{M_{Mg_{3}N_{2}}} = \frac{24500 g}{100.9494 g/mol} = 242.70 \:moles [/tex]

We can calculate the mass of ammonia prepared, knowing that 1 mol of Mg₃N₂ reacts with 6 moles of H₂O to produce 3 moles of Mg(OH)₂ and 2 moles of NH₃ (reaction 1).

[tex]n_{NH_{3}} = \frac{2\: moles\: NH_{3}}{1\: mol\: Mg_{3}N_{2}}*n_{Mg_{3}N_{2} = \frac{2\: moles\: NH_{3}}{1\: mol\: Mg_{3}N_{2}}*242.70 \:moles \:Mg_{3}N_{2} = 485.4 \:moles[/tex]

Then, the mass of NH₃ is:

[tex] m_{NH_{3}} = n_{NH_{3}}*M_{NH_{3}} = 485.4 \:moles*17.031 g/mol = 8266.8 g = 8.27 kg [/tex]

Since the process is 71% efficient, the mass that can be prepared is:

[tex] m = 8.27 kg*0.71 = 5.87 kg [/tex]

Therefore, the mass of ammonia that can be prepared is 5.87 kg.

I hope it helps you!

Answer:

[tex]Cs^+[/tex]

Explanation:

Cesium Lewis dot structure would look like this:

·Cs,  because it only has one valence electron. But, since it has a plus, that means we lost an electron. So, we have to get rid of the dot and you have:

[tex]Cs^+[/tex]

Answer:

Electrostatic

Explanation:

The forces that are overcome are the repulsive electrostatic forces between the protons (all charged positively).

Answer:

The correct answer is - b) precipitation.

Explanation:

In the given question the lead ion in an aqueous solution is mixed with the Leutium ion in an aqueous solution and forms an insoluble or solid salt. This type of reaction is referred to as precipitation reactions in chemistry.

Such reactions are helpful in determining if a particular ion is present in the solution or not.

Pb2+ (aq) + lu- (aq) → Pblu (s)

The equilibrium partial pressure of HF is 0.55 atm.

The equation of the reaction is;

        H2(g) + F2(g) ⇄ 2HF

I         2           1             0

C       -x           -x            +x

E     2 - x        1 - x           x

We know that;

pH2 = 2.0 atm

PF2 =  1.0 atm

pHF = ??

Kp = 0.45

So;

Kp = (pHF)^2/pH2. pF2

0.45 = x^2/(2 - x) (1 - x)

0.45 =  x^2/x^2 - 3x + 2

0.45(x^2 - 3x + 2) = x^2

0.45x^2 - 1.35x + 0.9 =  x^2

0.55 x^2 + 1.35x - 0.9 = 0

x = 0.55 atm

Learn more about equilibrium: https://brainly.com/question/3980297

Answer: The order of increasing energy is: radio < infrared < red < blue < UV < x rays

Explanation:

Electromagnetic wave is defined as the wave which is associated with both electrical and magnetic component associated with them.  

The electromagnetic radiations consist of gamma rays , X rays , Ultraviolet , Visible , Infra red , microwaves and radio waves arranged in order of decreasing frequency and increasing wavelengths. The visible region consists of violet , indigo , blue , green , yellow, orange and red lights in order of decreasing frequency or increasing wavelength

The relationship between energy  and frequency of the wave follows the equation:

[tex]E=h\times \nu[/tex]

where,

[tex]\nu[/tex] = frequency of the wave

E = energy of wave

From the above relation, it is visible that energy and frequency follow direct relation. For increase in value of frequency, energy increases and vice-versa.

Thus the order of increasing energy is: radio < infrared < red < blue < UV < x rays

Answer:

b. snake and earthworm

Explanation:

embryos are different from each other in early stages- all the others look similar

Answer:

2KCl+Fe---->FeCl2+2K

Explanation:

You can observe that the no.of atoms in reactant side is equal to that of products side of each element.

Answer:

The correct answer is - 733.69 mg.

Explanation:

given:

The volume of ascorbic acid = 50 ml

The volume of NaOH = 20.74 ml

Molarity of NaOH = 0.201 M

formula = C6H8O6

Solution:

moles of NaOH for titration = molarity of NaOH × The volume of NaOH

= 0.201 × 20.74 × 10^-3

=4.16874 × 10^-3

then molecular weight of ascorbic acid

= 6 × 12+ 8×1+ 6× 16

=176g/mol

the molecular mass would be

= 4.16874 × 10^-3 × 176

= 733.69 × 10^-3 g

=733.69 mg

[tex]\displaystyle 1.67 \ mol \ KBr[/tex]

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

[RxN - Balanced] 2K + Br₂ → 2KBr

[Given] 1.67 moles K

[Solve] moles KBr

Step 2: Identify Conversions

[RxN] 2 mol K → 2 mol KBr

Step 3: Stoichiometry

Answer:

Option A. 9.4 L

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 8 L

Initial temperature (T₁) = 293 K

Final temperature (T₂) = 343 K

Final volume (V₂) =?

V₁ / T₁ = V₂ / T₂

8 / 293 = V₂ / 343

Cross multiply

293 × V₂ = 8 × 343

293 × V₂ = 2744

Divide both side by 293

V₂ = 2744 / 293

V₂ = 9.4 L

Therefore, the final volume of the gas is 9.4 L

Answer:

0.64 L

Explanation:

Step 1: Given data

Step 2: Calculate the volume corresponding to 5.4 kg of oil

Density is an intrinsic property and it is equal to the quotient between the mass and the volume.

ρ = m/V

V = m/ρ

V = 5.4 kg/(8.5 kg/L) = 0.64 L

Answer:

5SiO2 + 2CaC2 → 5Si + 2CaO + 4CO2

Explanation:

When you are balancing an equation, you use coefficients to change the number of atoms of each type that are on each side of the equation.

You cannot change subscripts, the small numbers to the right of the substances. You can only add coefficients, the large numbers to the left of substances.

A balanced equation has the same number and type of atoms on both sides of the equation (the reactants on the left, the products on the right).

To begin, this equation has:

1 Si

2 O

1 Ca

2 C  

on the left and

1 Si

1 Ca

3 O

1 C

on the right. Those numbers don't match!

By adding coefficients we end up with 5 Si, 10 O, 2 Ca and 4 C on both sides.

Answer:

B: Barnacles ride on a gray whale's back to obtain food, and the hale is not harmed.

Explanation:

I got it right on Edge.

Answer:

case1.

The addition of acid and base leads to a change in pH of the water when adding to deionized water due to fact that acid and bases dissociated in dissolving in water. If the H+ ion increases in the water as acid addition hikes it, it will result in decreasing the pH value. The intensity of the acid also affects the dissociation of the ions.

case2

Buffers are normally formed by weak acid and its conjugate base, and adding acid to the buffer it absorbs the H+ ions so the pH will be lower and adding base or increase of OH- conjugate base resists the pH value to increase.

Answer:

ch4+h2o----725°-->co+2h2

Answer:

Please see the attached picture.

Explanation:

1) Draw a benzene ring

2) On the first carbon, add a CH₂CH₃ (known as ethyl) since its location number is 1.

3) 'Dimethyl' refers to 2 methyl (CH₃) branches. The location numbers are 2 and 3, thus add a CH₃ on the 2nd and 3rd carbons.

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 8.12×10²³ atoms are in  90.43 mole of copper.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity of amount of substance. It measure the number of elementary entities of a given substance that are present in a given sample. There are so many formula for calculating mole.

we know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number

number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)

number of moles of copper=90.43 moles

Substituting all the given values in the above equation, we get

number of atoms/molecules= 90.43 × 6.022×10²³

number of atoms/molecules=8.12×10²³ molecules

Therefore, 8.12×10²³ atoms are in 90.43 mole of copper.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

Answer:

A zwitterion or a hybrid ion is an ion that has both a positive and negative charge and can act as either a base or an acid.

Explanation:

A zwitterion or a hybrid ion is an ion that has both a positive and negative charge and can act as either a base or an acid. The net charge on a zwitterion is zero since it has equal number of positive and negative charges.

Alanine, is a monoamino monocarboxylica acid that is diprotic when fully protonated. The carboxylic acid group, COOH and the amino group, NH₃⁺, are able to produce one proton each. At a pH equal to the isoelectric point of alanine, it exists mainly in the zwitterionic form with the α-amino group protonated as NH₃⁺ and the α-carboxyl group deprotonated as COO⁻ . This is because at the isoelectric point of alanine (6.0), pI is greater than the acid dissociation constant, pKa of the α-carboxyl group whereas, pI is less than the acid dissociation constant, pKa of the α-amino group, so the two groups are negatively and positively charged respectively.

Answer:

C I think

Explanation:

There will be no effect  if HI is removed from a reaction vessel containing this reaction at equilibrium. When HI remove, concentration of all three component is change and reach a new equilibrium stage.

H2 + I2 ⇄ 2HI

So, B is correct option.

The stage in reversible reaction at which rate of forward reaction is equal to rate of backward reaction is equal is called an equilibrium.

To learn more about equilibrium here.

https://brainly.com/question/11420477

#SPJ2

Answer:

Rusting

Explanation:

Rusting is oxidizing iron, which would be a chemical property.

Answer:

[tex]V_1=0.0714L[/tex]

Explanation:

Hello there!

In this case, since we need to dilute the 1.75-M HCl, and the total number of moles remain unchanged, we can write:

[tex]n_1=n_2[/tex]

And in terms of volume and concentration:

[tex]C_1V_1=C_2V_2[/tex]

Thus, we can solve for the volume of the concentrated HCl as shown below:

[tex]V_1=\frac{C_2V_2}{C_1}[/tex]

Therefore, we plug in the data to get:

[tex]V_1=\frac{0.250M*0.500L}{1.75 M}\\\\V_1=0.0714L[/tex]

Best regards!

Answer: 23.2

Explanation:

Answer:

its C

Explanation:

The skeletal structure shows the outline of the compound with lines and bonds. Both the structures are unrelated. Thus, option C is correct.

Isomers are structures with identical molecular structures but differ in the skeletal or molecular representation. They also have varied properties as compared to the parent structure.

Identical compounds are structures that have the same atoms and are arranged with the same spatial design and orientation. The number of atoms and the spatial arrangement of the two compounds is different.

Therefore, the two compounds are unrelated.

Learn more about isomers here:

https://brainly.com/question/26658261

#SPJ2

Answer:

2 PO₄³⁻(aq) + 3 Fe²⁺(aq) ⇒ Fe₃(PO₄)₂

Explanation:

Let's consider the complete ionic equation between the ions present. It includes all the ions and the insoluble compounds (Fe₃(PO₄)₂ is insoluble).

Na⁺(aq) + 2 PO₄³⁻(aq) + 3 Fe²⁺(aq) + NO₃⁻(aq) ⇒ Fe₃(PO₄)₂ + Na⁺(aq) + NO₃⁻(aq)

The net ionic equation includes only the ions that participate in the reaction (not spectator ions) and the insoluble compounds.

2 PO₄³⁻(aq) + 3 Fe²⁺(aq) ⇒ Fe₃(PO₄)₂

Answer:

Yes. At least some. There has been ups and downs in temperature ever since the Earth was created, and this is just another up in temperature. I do think that humans have made it worse though, with all of the greenhouse gases and things like that.