write a snippet of code in c to both declare and initialize a dynamic array consisting of n integer values using a single line of code.

Fiction: The least expensive books in this category can range from $10 to $15, while the most expensive books can cost $30 or more, especially for hardcover or special editions.

The current prices of books or any real-time price tracking capabilities. My training data only goes up to September 2021, and prices for books and other products can change frequently and vary by location, publisher, and other factors.

However, I can provide some general information on book prices by category based on historical data. Please note that these prices are not current and are only intended as rough estimates.

Here are some approximate price ranges for different book categories:

- Fiction: The least expensive books in this category can range from $10 to $15, while the most expensive books can cost $30 or more, especially for hardcover or special editions.

- Non-fiction: The least expensive books in this category can also start at around $10 to $15, but prices can go up significantly depending on the topic and author. Some non-fiction books can cost $50 or more, especially for textbooks or specialized academic works.

- Children's books: The least expensive children's books can start at around $10 to $12, while some deluxe editions or illustrated books can cost $30 or more.

- Reference books: Reference books such as dictionaries, encyclopedias, and atlases can range from $20 to $100 or more depending on the level of detail and specialization.

Please keep in mind that these are just general estimates and that actual prices can vary greatly depending on the publisher, format, and other factors.

Learn more about Fiction

brainly.com/question/25654749

#SPJ11

If two analytic functions, f(z) and g(z), are equal on a simple loop γ contained within an open domain, then they are equal inside γ as well.

Let's assume that f(z) and g(z) are equal on the simple loop γ, which means f(z) - g(z) = 0 on γ. Since f(z) and g(z) are both analytic on the open domain, they can be expanded as power series around any point within γ. Let's consider a point z₀ inside γ. By the uniqueness theorem for power series expansion, if two power series are equal on a set with an accumulation point, then they are equal everywhere in their common domain of convergence. Therefore, since f(z) - g(z) = 0 on γ, it implies that f(z) - g(z) = 0 for all points inside γ.

By extension, since z₀ was chosen arbitrarily inside γ, this conclusion holds for every point inside γ. Hence, f(z) and g(z) are equal inside the simple loop γ as well. Therefore, if two analytic functions are equal on a simple loop γ within an open domain, they are equal inside γ too.

Learn more about loop here-

https://brainly.com/question/14390367

#SPJ11

The statement given "a factor in ANOVA is an item potentially influencing the data that may or may not have an effect on the outcome." is true because a  factor in ANOVA is an item potentially influencing the data that may or may not have an effect on the outcome.

In ANOVA (Analysis of Variance), a factor refers to a variable or condition that is being studied to determine its impact on the outcome or dependent variable. Factors are considered potential sources of variation in the data and can include variables such as treatments, conditions, or groups.

The purpose of conducting ANOVA is to analyze whether these factors significantly contribute to the observed differences in the outcome variable. By comparing the variances between groups, ANOVA helps determine if the factors being studied have a statistically significant effect on the outcome. Therefore, a factor in ANOVA can be an item that may or may not have an influence on the outcome.

You can learn more about ANOVA at

https://brainly.com/question/30459773

#SPJ11

Software program for claims analysis and error detection.

RACs (Recovery Audit Contractors) use a software program to analyze a practice's claims, looking for potential billing errors or fraudulent activities.

This software program scans the claims data and compares it to established billing rules and regulations to identify any inconsistencies or irregularities.

By employing automated data analysis, RACs can efficiently review a large volume of claims and identify potential areas of concern, helping to ensure proper billing practices and prevent fraud.

Learn more about Software program

brainly.com/question/1576944

#SPJ11

False. While Differentiated Services (DiffServ) is a commonly used Quality of Service (QoS) mechanism in enterprise networks, it is not necessarily the most widely accepted. There are other QoS mechanisms available, such as Integrated Services (IntServ), that are also commonly used in enterprise networks.

DiffServ works by using a set of code points to classify traffic and prioritize it accordingly. This allows network administrators to ensure that critical traffic, such as voice or video, is given priority over less important traffic. However, IntServ takes a more individualized approach to QoS by establishing a dedicated path for each flow of traffic.

Ultimately, the choice of which QoS mechanism to use in an enterprise network will depend on the specific needs and requirements of the network. Different mechanisms will be better suited for different types of traffic and applications. It is important for network administrators to carefully evaluate their options and choose the mechanism that will best meet their needs.

Learn more about network administrators here-

https://brainly.com/question/30019022

#SPJ11

The type of honeypot that emulates the real production network of a target organization and causes attackers to devote their time and resources toward attacking the critical production system of the company is called a Honeynet.

Honeynets are designed to emulate a real network with various operating systems, services, and applications to attract attackers and study their behavior. They can be used to detect new or unknown attacks, gather intelligence on attackers, and study the techniques and tools used by attackers.

Unlike other types of honeypots, Honeynets require significant resources and expertise to set up and maintain, and should only be used in controlled environments by experienced security professionals.

Learn more about honeypot  here:

https://brainly.com/question/24182844

#SPJ11

The type of honeypot that emulates the real production network of a target organization and causes attackers to devote their time and resources toward attacking the critical production system of the company is called a honeynet.

A honeynet is a high-interaction honeypot that is designed to simulate a full network with multiple hosts and services. It allows researchers to monitor attackers' behavior on a larger scale and gain a better understanding of their motives, tactics, and tools. Unlike other types of honeypots, which are designed to attract and trap attackers, honeynets are designed to gather intelligence and enable researchers to analyze attacker behavior in a safe and controlled environment.

For such more question on honeypot

https://brainly.com/question/17004996

#SPJ11

When executing a Jack program, the first subroutine that begins running is "main()".

In the Jack programming language, the "main()" subroutine serves as the entry point for the program. When a Jack program is executed, the execution starts from the "main()" subroutine. The "main()" subroutine is a special subroutine that is defined within the Jack program. It contains the initial instructions and logic that need to be executed when the program starts running. The "main()" subroutine can call other subroutines and perform various operations as required by the program.

By convention, the "main()" subroutine is the first subroutine that is executed when a Jack program is run. It provides a starting point for the program's execution, allowing control flow to proceed from there to execute the subsequent instructions and subroutines defined in the program. Therefore, when executing a Jack program, the first subroutine that begins running is indeed "main()".

Learn more about program here: https://brainly.com/question/30613605

#SPJ11

This general process applies to various NGS platforms, such as Illumina's sequencing-by-synthesis (SBS) technology. Other platforms, like Ion Torrent and Pacific Biosciences, use different principles but follow a similar workflow of cluster generation, sequencing, and base calling to read the sequencing reactions.

In massively parallel next-generation sequencing (NGS) technologies, sequencing reactions are read using various methods depending on the specific sequencing platform. Here's a general overview of how sequencing reactions are read in NGS:

1. Library Preparation: The DNA sample is prepared by fragmenting it into smaller pieces and attaching sequencing adapters to the ends of the fragments. These adapters contain specific sequences that are recognized by the sequencing platform.

2. Cluster Generation: The prepared DNA fragments are amplified through a process called cluster generation. This involves attaching the DNA fragments to a solid surface, such as a flow cell or a bead, and amplifying them to create clusters of identical DNA fragments.

3. Sequencing: The sequencing reaction begins by introducing fluorescently labeled nucleotides and DNA polymerase to the clusters of DNA fragments. Each nucleotide is labeled with a different fluorescent dye specific to its base (A, T, C, or G).

4. Imaging: The sequencing platform captures images of the clusters on the solid surface after the incorporation of each nucleotide. The fluorescent signal emitted from the incorporated nucleotide is detected and recorded by the imaging system.

5. Base Calling: The recorded fluorescent signals are analyzed by software algorithms to determine the sequence of the DNA fragment. The fluorescent signals corresponding to each nucleotide are translated into base calls (A, T, C, or G).

6. Data Analysis: The base calls from multiple clusters and DNA fragments are combined and aligned to reconstruct the original DNA sequence. Quality scores are assigned to each base call, indicating the confidence level of the sequencing result.

This general process applies to various NGS platforms, such as Illumina's sequencing-by-synthesis (SBS) technology. Other platforms, like Ion Torrent and Pacific Biosciences, use different principles but follow a similar workflow of cluster generation, sequencing, and base calling to read the sequencing reactions.

Learn more about Sequencing reactions

brainly.com/question/30546081

#SPJ11

The statement given " RAID connects several inexpensive hard-disk drives to one another." is true because  RAID connects several inexpensive hard-disk drives to one another.

RAID (Redundant Array of Independent Disks) is a technology that connects multiple inexpensive hard-disk drives together to work as a single logical unit. By combining the storage capacity and performance of multiple drives, RAID provides increased data reliability, improved performance, or both, depending on the RAID level used. It allows data to be distributed across multiple drives in different configurations, such as mirroring, striping, or parity. This enhances data protection against drive failures and can also improve read and write performance.

You can learn more about RAID at

https://brainly.com/question/28963056

#SPJ11

The requirements include defining the Person class with attributes, constructors, and getter/setter methods, as well as creating two unchecked exceptions.

The given problem requires the implementation of a Person class with attributes name and age, along with constructors and getter/setter methods.

Two unchecked exceptions, InvalidNameException and InvalidAgeException, need to be defined, and the Person class should handle invalid inputs using these exceptions.

The set methods should validate the parameters, throwing exceptions if the name is empty or the age is not within the range of 0 to 130.

The main class should prompt the user to create three person objects, handling any exceptions and requesting valid input. Finally, the main class should print the information of each person object.

Learn more about Person class

brainly.com/question/30695303

#SPJ11

The two common tools used to physically clean the inside of a computer are a damp rag and compressed air. Option C and Option D are the correct answers.

A damp rag is suitable for wiping away dust and debris from surfaces inside the computer, while compressed air is effective for blowing away dust from hard-to-reach areas.

A damp rag is useful for gently wiping down surfaces such as the exterior casing, keyboard, and monitor. It helps remove accumulated dust and smudges without damaging the components. Compressed air, on the other hand, is ideal for blowing away dust from fan blades, heat sinks, and other areas where it may have settled. It provides a powerful burst of air that dislodges and removes dust particles effectively.

Option C (Damp rag) and Option D (Compressed air) are the correct answers.

You can learn more about damp rag at

https://brainly.com/question/10723016

#SPJ11

The given statement "control break logic is used when the programmer wants a program to terminate immediately." is false because control break logic is a programming technique used to group data together and perform calculations or actions on those groups.

It is often used in report generation where large amounts of data need to be organized and presented in a logical manner. When a control break occurs, the program switches from processing individual data records to processing groups of data based on a particular key field. Once the calculations or actions have been performed on the group, the program returns to processing individual records until the next control break occurs.

In summary, control break logic is not used to terminate a program, but rather to group data and perform calculations or actions on those groups. It is an important programming technique for report generation and other applications where large amounts of data need to be processed in an organized manner.

Learn more about control break logic: https://brainly.com/question/30753674

#SPJ11

If your printer keeps grabbing several sheets of paper at a time, the part that probably needs cleaning or replacing is the paper feed roller.

The paper feed roller is responsible for pulling the paper from the input tray and advancing it through the printer. Over time, dust, dirt, and paper residue can accumulate on the surface of the roller, causing it to lose its grip on the paper and resulting in multiple sheets being picked up simultaneously.

Cleaning the paper feed roller with a lint-free cloth and a mild cleaning solution can often resolve this issue. However, if the roller is worn or damaged, it may need to be replaced to ensure proper paper feeding.

You can learn more about paper feed roller at

https://brainly.com/question/17157651

#SPJ11

The degausser in the basement of your organization can securely destroy various types of magnetic media such as hard drives, floppy disks, and magnetic tapes. It works by using a powerful magnetic field to erase the data stored on these media, making it impossible to recover any information. It's important to use a degausser properly and follow all safety protocols to ensure the secure destruction of sensitive data.

A degausser is a machine that disrupts and eliminates magnetic fields stored on tapes and disk media, removing data from devices like your hard drives. The degaussing process changes the magnetic domain where data is stored, and this shift in domain makes data unreadable and unable to be recovered. Degaussing is the process of decreasing or eliminating a remnant magnetic field. It is named after the gauss, a unit of magnetism, which in turn was named after Carl Friedrich Gauss. Due to magnetic hysteresis, it is generally not possible to reduce a magnetic field completely to zero, so degaussing typically induces a very small "known" field referred to as bias. Degaussing was originally applied to reduce ships' magnetic signatures during World War II. Degaussing is also used to reduce magnetic fields in cathode ray tube monitors and to destroy data held on magnetic storage.

To learn more about "Degausser" visit: https://brainly.com/question/14312869

#SPJ11

True, rogue Wi-Fi hotspots imitate free hotspots and capture users' information such as usernames and passwords.

Rogue Wi-Fi hotspots are unauthorized or malicious Wi-Fi networks that are set up to mimic legitimate and trusted hotspots.

These rogue hotspots often have names similar to legitimate networks and may advertise themselves as free or public networks to entice users to connect.

Once connected, these rogue hotspots can capture information transmitted by users, including usernames and passwords, when users attempt to log in to legitimate websites.

By imitating free hotspots, attackers can trick unsuspecting users into connecting to their network and unknowingly disclose sensitive information.

This information can then be used for various malicious purposes, such as identity theft, unauthorized access to accounts, or financial fraud.

It is important for users to be cautious when connecting to Wi-Fi networks, especially in public places, and verify the legitimacy of the network before transmitting any sensitive information.

Learn more about rogue Wi-Fi hotspots

brainly.com/question/31457622

#SPJ11

Manipulating the difference between screen time and real time can be achieved through various methods and technologies. One common approach is through the use of time manipulation techniques in software applications or systems.

Here are a few examples of how the difference between screen time and real time can be manipulated:

1. Time Acceleration/Deceleration: Software applications can speed up or slow down the passage of time within the digital environment. This can be seen in video games, where time may appear to pass faster or slower than real time to enhance gameplay or create specific challenges.

2. Time Pausing/Freezing: In some cases, software may pause or freeze the progression of time in a digital system. This can be useful for temporarily halting processes, allowing users to analyze information, or providing a break in a real-time application.

3. Time Rewinding/Replaying: Certain applications or systems enable the ability to rewind and replay events that have already occurred. This feature is commonly found in video editing software, allowing users to review and modify recorded content.

4. Simulated Time: In virtual or simulated environments, the concept of time can be entirely different from real-time. For instance, in simulations or virtual reality experiences, time can be altered or even non-existent, allowing users to interact within a different temporal context.

Learn more about screen time at: https://brainly.com/question/20689020

#SPJ11

The program then prints the error message using the print statement.

By using try-except blocks to handle input exceptions, you can create a more robust program that can handle unexpected input from users.

Suppose you are creating a program to track the maximum occupancy of a restaurant.

The program will take in the number of seats in the restaurant and keep track of the current number of customers.

To handle input exceptions, you can use try-except blocks.

First, you can use a try-except block to handle the case where the user inputs a non-integer value for the number of seats.

Here's an example code snippet:

try:

   num_seats = int(input("Enter the number of seats in the restaurant: "))

except ValueError:

   print("Invalid input. Please enter an integer value for the number of seats.")

This code block will attempt to convert the user input into an integer value.

If the input is not an integer, a ValueError exception will be raised, and the code will print an error message and continue on to the next line of code.

You can use a similar try-except block to handle the case where the user inputs a non-integer value for the number of customers currently in the restaurant:

try:

   num_customers = int(input("Enter the number of customers currently in the restaurant: "))

except ValueError:

   print("Invalid input. Please enter an integer value for the number of customers.")

Again, if the user input is not an integer, a ValueError exception will be raised, and the program will print an error message.

Finally, you can use a try-except block to handle the case where the user inputs a value for the number of customers that exceeds the number of seats in the restaurant:

try:

   if num_customers > num_seats:

       raise ValueError("Number of customers exceeds number of seats.")

except ValueError as e:

   print(str(e))

This code block first checks if the number of customers is greater than the number of seats.

If it is, a ValueError exception is raised with a custom error message.

For similar questions on handle input

https://brainly.com/question/30130281

#SPJ11

The error "non-numeric argument to binary operator" indicates that a mathematical operation is being performed on a non-numeric value.

What does the error "non-numeric argument to binary operator" indicate?

The error message "non-numeric argument to binary operator" signifies that an operation involving two operands is being performed, but one or both of the operands are non-numeric values.

To resolve this error, check the operands involved in the binary operator and ensure they are numeric.

Non-numeric values could include strings, null values, or other non-numeric data types.

If you are working with arrays or vectors, verify that the elements being operated on are numeric and not containing any non-numeric values.

You may need to convert or manipulate the non-numeric values appropriately before performing the operation.

Taking care of the non-numeric values will help in resolving the error and allow the operation to be executed successfully.

Learn more about non-numeric value

brainly.com/question/30433639

#SPJ11

The error 'non-numeric argument to binary operator' in R language is caused when the operator '+' is applied to non-numeric elements. To solve it, you need to ensure that the variables involved in the operation are defined as numeric quantities.

This error occurs in programming, particularly in R programming language, when the binary operator '+' is applied between non-numeric arguments. This usually indicates that the variables x, floor(d), or ceiling(d) are not defined as numeric values. The elements in vector x[floor(d)] and x[ceiling(d)] should be numbers for the operation to be successful. To correct this issue, ensure that your variables are defined as numeric quantities before performing operations on them.

https://brainly.com/question/32890059

Answer:

Explanation:

ARPANET (Advanced Research Projects Agency Network)

A Voxel is a term used to describe the volume elements (depth) within the matrix's third direction ("Z" direction).

In the context of imaging and computer graphics, a voxel (short for "volume pixel") refers to a three-dimensional pixel that represents a value or attribute within a volumetric space. It is the counterpart of a two-dimensional pixel in traditional images. A voxel represents a data point within a three-dimensional grid or matrix, typically in medical imaging, scientific visualization, or computer graphics.

While a pixel represents a single point in a two-dimensional image, a voxel represents a volume element in a three-dimensional space. It encapsulates information about the attributes or properties of a particular volume element, such as density, color, or intensity.

Voxels are commonly used in various applications, including medical imaging techniques like computed tomography (CT) scans and magnetic resonance imaging (MRI). Each voxel within the image matrix corresponds to a specific volume within the scanned object or subject. By analyzing and manipulating voxels, detailed three-dimensional representations of objects or organisms can be reconstructed and visualized.

Learn more about Voxel here:

https://brainly.com/question/30747823

#SPJ11

An authentication framework, which defines the message formats used between different entities in a system, is called a communication protocol. This protocol establishes a set of rules and conventions that dictate how various components interact and exchange information.

An authentication framework is a set of protocols and standards that ensure secure communication between different systems. It defines the message formats that are used between the systems to authenticate users and devices. The message formats are essential for establishing a secure connection between two systems and ensuring that only authorized users or devices can access sensitive information.
In today's digital age, where security breaches and cyber attacks are becoming increasingly common, authentication frameworks have become a crucial aspect of network security. These frameworks use different formats to exchange information, such as SAML, OAuth, and OpenID Connect. These formats provide a standardized way for systems to exchange authentication information, making it easier to implement secure communication between systems.
In summary, an authentication framework is an essential component of network security that defines the message formats used between different systems. These formats ensure secure communication between systems and help prevent unauthorized access to sensitive information. As technology continues to advance, it is essential to have robust authentication frameworks in place to ensure the security and integrity of data.

Learn more about authentication framework here-

https://brainly.com/question/31755971

#SPJ11

The position of an object can be found in the inspector under the "transform" tab. The transform tab is where you can access and adjust the position, rotation, and scale of an object in a 3D space.

This tab is essential when working with objects in Unity, as it allows you to manipulate their position in the scene, adjust their rotation, and change their scale. The transform tab is an important part of the Unity interface, and understanding how to use it effectively is crucial for working with 3D objects in the software. So, to answer your question, the position of an object can be found in the inspector under the "transform" tab.

The position of an object can be found in the inspector under the "Transform" tab. To locate it, follow these steps:

1. Select the object in the scene.
2. Open the Inspector window if it's not already visible.
3. Look for the "Transform" tab in the Inspector.
4. Within the Transform tab, you'll find the position of the object.

To know more about transform tab visit:-

https://brainly.com/question/17643845

#SPJ11

The PHP method that selects the database to be used when sending form data is `mysqli_select_db($connection, $database_name)`. This function takes two arguments: the connection object `$connection` and the name of the database `$database_name`. Make sure you have an established connection with the MySQL server before using this method.

The PHP method that picks the database used when sending in form data depends on the specific PHP framework or library being used. In general, the process involves establishing a database connection using credentials such as username and password, selecting the appropriate database from the available options, and executing queries to insert or retrieve data from the selected database. Depending on the complexity of the application and the specific requirements of the database, the process can be relatively straightforward or involve more complex logic.

To know more about database visit :-

https://brainly.com/question/30634903

#SPJ11

Handoff is an iOS feature that utilizes Bluetooth or Wi-Fi to detect nearby compatible devices. The main answer is d. Handoff

Handoff is an iOS feature that utilizes Bluetooth or Wi-Fi to detect nearby compatible devices signed in to the same Apple account, enabling the seamless syncing of activity in progress. With Handoff, users can start an activity on one device and seamlessly continue it on another, without any interruptions or loss of progress.

Handoff allows users to transition smoothly between devices, making it convenient and effortless to switch from an iPhone to an iPad or a Mac. Whether it's composing an email, browsing the web, or working on a document, Handoff ensures that users can pick up right where they left off. The feature uses proximity awareness and the Apple ID to establish a secure connection between devices, allowing for the transfer of data and maintaining a consistent experience across different screens. Handoff enhances productivity and provides a seamless ecosystem for iOS users.

Learn more about Handoff

brainly.com/question/31595490

#SPJ11

The conflict resolution technique used by the team leader in this scenario is called the collaborative or integrative approach.

This approach involves working together to find a solution that meets the needs and interests of all parties involved. It emphasizes the importance of communication, active listening, and mutual understanding to identify common goals and reach a compromise that satisfies everyone. In this case, the team leader focused on finding a solution that would allow team members to take a vacation while ensuring that the project does not fall behind schedule. By encouraging team members to make concessions, the team leader was able to identify ways to redistribute workload and adjust timelines to accommodate everyone's needs. This approach can help build stronger relationships and foster a more positive and productive team environment.

To know more about conflict resolution technique, visit:

brainly.com/question/13655064

#SPJ11

The password can't start with a digit, so we have 26 choices for the first character, and for the remaining 13 characters, we have 36 choices. Using the multiplication principle, we get 26 x 36^13, which equals approximately 2.12 x 10^21 valid passwords.

To solve this problem, we can use the following steps:
1. Choose the first character: Since the password cannot start with a digit, we have 26 choices for the first character (all lowercase letters).
2. Choose the remaining characters: For each of the remaining 13 characters, we have 36 choices (10 digits and 26 lowercase letters).
Using the multiplication principle, the total number of valid passwords is:
26 x 36^13 = 26 x (36^13)
This equals approximately 2.12 x 10^21. Therefore, there are approximately 2.12 sextillion valid passwords with the given restrictions.

Learn more about passwords here;

https://brainly.com/question/30482767

#SPJ11

The geographical distance between the source and destination hosts on a network can affect latency. The summary of the answer is that increased geographical distance generally leads to higher latency in network communications.

In the explanation, latency refers to the time it takes for a packet of data to travel from the source host to the destination host. When the source and destination hosts are farther apart geographically, the physical distance that the data needs to travel increases. This increased distance introduces additional delays due to factors such as signal propagation time, transmission medium limitations, and routing complexities.

The longer the distance, the more intermediate network devices (routers, switches) the data packets may need to pass through. Each of these devices adds some processing time and introduces potential bottlenecks or congestion points that can further increase latency. Additionally, the quality and efficiency of the underlying network infrastructure along the path can also impact latency.

Therefore, it is generally observed that as the geographical distance between the source and destination hosts increases, the latency in network communications tends to be higher.

learn more about latency here; brainly.com/question/29022594

#SPJ11

False. While establishing a policy for password updates is an important step in securing the operating system, it is not the first step.

The first step in securing an operating system would be to identify potential vulnerabilities and threats, and then implement measures to mitigate those risks.

Know more about the operating system

https://brainly.com/question/22811693

#SPJ11

The term that fills the blank is "virtualization."Virtualization refers to the process of creating virtual environments or virtual machines (VMs) that run on a physical computer or server.

It enables multiple copies of the same or different operating systems to execute simultaneously on a single computer.By using virtualization, each virtual machine operates independently and is isolated from other virtual machines and the underlying host system. This isolation prevents applications running on different virtual machines from interfering with each other. Each virtual machine has its own virtual hardware resources, such as virtual CPU, memory, disk space, and network interfaces, allowing them to function as if they were running on separate physical machines.Virtualization provides several benefits, including increased hardware utilization, easier software deployment, enhanced security, and improved disaster recovery capabilities. It is widely used in data centers, cloud computing environments, and desktop computing to consolidate servers, run multiple operating systems on a single machine, and isolate applications or workloads.

To know more about server click the link below:

brainly.com/question/29620580

#SPJ11