The molar mass of tantalum is approximately 180.94 g/mol.
To convert moles to grams, we can use the following formula:
mass (g) = moles × molar mass
Thus,
mass = 23 mol × 180.94 g/mol = 4160.62 g
Therefore, 23 moles of tantalum is approximately 4160.62 grams.
To know more about tantalum refer here
https://brainly.com/question/24198197#
#SPJ11
A chemical ____ is a force of attraction between atoms or
ions that share or transfer valence electrons.
A chemical bond is a force of attraction between atoms or ions that share or transfer valence electrons.
Which of the following is NOT an atom that hydrogen bonds?
Select one:
a. Oxygen
b. Nitrogen
c. Fluorine
d. Sodium
Answer:
The answer is D sodium
Explanation:
What property allows objects to be subject to gravity?
friction
mass
inertia
acceleration
Answer:
Mass
Explanation:
What is the atomic radius
of mercury?
The answer is 155 pm, hope this helps!
Picture a neutral Satom. This neutral atom will have
valence electrons. To reach a more stable configuration, this atom will
(gain, lose) electrons. The charge of the ion that forms will be
ASAP PLEASEE
Answer:
it will have 6 valence electrons
it will gain electrons
charge will be 2-
If we had 79.3 grams of Xe, would we expect a volume that is
greater than or less than that obtained with neon?
a
Greater than
b Equal
с
Less than
Answer:less than
Explanation:
If we had 79.3 grams of Xe, we would expect a volume that is less than obtained with neon. So, the correct option is (C).
What is Density?Density is defined as the mass per unit volume of a substance. The most commonly used symbol for density is ρ, although the Latin letter d can also be used. Density is defined as mass divided by volume:
[tex]{\displaystyle \rho ={\frac {m}{V}}}[/tex]
where ρ is density,
m is mass, and
V is volume.
The mass contained per unit volume of an object is known as density. where the SI unit of density is kilogram per cubic meter [tex](kg/m^3).[/tex] Density is inversely proportional to volume, so the density of Xenon is [tex]5.894 kg/m^3[/tex] while the density of neon is 0.89994 kg/m³. So, if density is more than volume will be less and vice versa. In this case, density of Xenon is more as compare to neon so, the volume of neon will be more.
Thus, if we had 79.3 grams of Xe, we would expect a volume that is less than obtained with neon. So, the correct option is (C).
Learn more about Density, here:
https://brainly.com/question/29775886
#SPJ5
At what power of ten does the entire solar system come into view
Answer: 10,000,000,000 kilometers
Explanation:
All the planets in our solar system come into view. But at this distance, only Jupiter and Saturn would be visible with the naked eye.
If you know the atomic number and the mass number of an atom of any element, you can determine the atom's composition.
A:True
B:False
True. i hope its correct, have a good day. stay happy and stay safe
Answer:
A:true
Explanation:
The number of protons, neutrons, and electrons in an atom can be determined from a set of simple rules.
differences between alkalis, bases and acids? (answer for many points :) )
Explanation:
protons.
An acid can also be thought of as a chemical that can neutralize a base. Similarly, a base can neutralize an acid.
Acids turn litmus paper red, while bases make litmus paper turn blue.
Some examples of acids are sulfuric acid, hydrochloric acid, nitric acid, and so on. Some examples of bases are sodium hydroxide, potassium hydroxide, and so on.
Acids generally taste sour, while bases have a bitter taste.
Alkalis are the bases that are water-soluble, which means that they dissolve in water. In other words, not all bases are water-soluble, and only the water-soluble bases are known as alkalis. An example of an alkali is sodium hydroxide. It is a base because it can neutralize an acid, and because it is water-soluble, it is an alkali. An example of a base that is not alkali is copper oxide. This chemical can neutralize an acid, but it is insoluble in water.
In other words, all alkali are bases but not all bases are alkalis.
Also, an alkali has a hydroxide group, while a base has an oxide group in it.
2 NaOH + H2SO4 ------> 2 H2O + Na2SO4
How many moles of H2O can be produced from 12.5 moles of NaOH?
Explanation:
2moles of NaOH -> 2moles of H2O
so the number of moles r equal.
hence moles of H2O is 12.5
Is it okay if you help me? I'm kind of in a tight spot here. Tysmmmmmmmmmmmmm o(❁´◡`❁)o!!
Answer:
the answer is true
Explanation:
it's just true
Mg3N2+3H2O-3MgO+2NH3 If 17 g of magnesium nitride is used, what volume of ammonia gas would be collected at 20°C and 0.989 atm?
Explanation:
what are the unit given for the questions
The planets in the solar system revolve around the Sun because the Sun is
Answer: Anyway, the basic reason why the planets revolve around, or orbit, the Sun, is that the gravity of the Sun keeps them in their orbits. ... If the Sun weren't there, the Earth would travel in a straight line. But the gravity of the Sun alters its course, causing it to travel around the Sun, in a shape very near to a circle
HELPPPP!!!!
What property allows objects to be subject to gravity?
friction
mass
inertia
acceleration
if youre good at chemistry u better help me now please!
Answer:
letter B is the answer
Explanation:
just take a look at the atoms
Answer:
B.) Only elements have one kind of atom.
Explanation:
An element consists of only one type of atom, while a compound consists of two or more types of elements
Who discovered the nucleus?
Which change will cause gravitational force between and a soccer ball to increase?
Answer:
Moving the balls closer together. The distance decreases and force increases.
Which of the following statements is FALSE?
The microscopic size of cells enable them to function properly.
Most organisms on Earth are multi-celled.
Some cells can be shaped like a ball.
Growing children’s cells are constantly dividing.
Answer:
The answer is functioning properly ok dude?
Explanation:
Answer: "The microscopic size of cells enable them to function properly.
Most organisms on Earth are multi-celled." is false
Explanation:
In unicellular organisms, cell division is the means of reproduction; in multicellular organisms, it is the means of tissue growth and maintenance. Survival of the eukaryotes depends upon interactions between many cell types, and it is essential that a balanced distribution of types be maintained. This is achieved by the highly regulated process of cell proliferation. The growth and division of different cell populations are regulated in different ways, but the basic mechanisms are similar throughout multicellular organisms.
what best describe the process of percipitation in the water cycle
Answer:
Precipitation is water released from clouds in the form of rain, freezing rain, sleet, snow, or hail. It is the primary connection in the water cycle that provides for the delivery of atmospheric water to the Earth. Most precipitation falls as rain.
Explanation:
Which is a liquid that is used to absorb and release thermal energy?
coolant
lubricant
grease
fuel
Answer
grese
Explanation:
Any liquid could absorb and release thermal energy. However, a refrigerant or a coolant absorbs heat and releases it to any area faster than any ordinary liquid such as water. So to complete the sentence: A refrigerant/cooler is a liquid that absorbs and releases thermal energy
Answer:
The correct answer is coolant.
Hope it helps. :)
The highest pressure ever produced in a laboratory setting was about 2.0 x 10 6 atm. If we have a
1.0 x 10 -5 liter sample of a gas at that pressure, then release the pressure until it is equal to 0.275 atm,
what would the new volume of that gas be?
Answer:
Volume = 72.7272
Explanation:
if only pressure and volume change, then we can do some simple math to find the answer.
2 x 10 ^ 6 times 1 x 10 ^-5 = 20
pressure and volume must equal 20
20 = 0.275 x volume
20 / 0.275 = new volume
I don't remember significant digits but your volume is 72.72727272 just repeated
If we have a 1.0 x 10 -5 liter sample of a gas at that pressure, then release the pressure until it is equal to 0.275 atm, the new volume will be 72.7272
What is Volume?Volume is the space occupied by a three-dimensional object.
By the Boyle's law
[tex]\rm P_1V_2= P_1V_2[/tex]
P1 (initial pressure) = [tex]2.0 \times10^6 atm[/tex]
V1 (initial volume) = [tex]1.0 \times10^-5 L[/tex]
P2 (final pressure) = 0.275 atm
V2 (final volume) = ? (in L)
Putting the values in the equation
[tex]\rm 2.0 \times10^6 atm \times 1.0 \times10^-5 L = 0.275 atm \times V_2\\\\V_2 = \dfrac{20}{0.275} = 72.72 L[/tex]
Thus, the volume is 72.72 L.
Learn more about Boyle's law
https://brainly.com/question/1437490
#SPJ2
constrast a mixture and a compound , how are. they different?
Answer:
A mixture is composed of two or more elements or compounds in a non-fixed ratio, which means you can vary the amount of substance in a mixture. A compound is composed of two or more elements in a fixed ratio, so you cannot vary the amount of each element in a compound
Answer:
mixture retains property of combing substances while compound has new properties that are different from combing elements...
can be separated by physical means whereas compounds can be separated by chemical or electrochemical methods
How many moles of Al would be produced from 20 moles of Al2O3?
2Al2O3
->
4A1 + 302
[tex]\displaystyle 40 \ mol \ Al[/tex]
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] 2Al₂O₃ → 4Al + 3O₂
[Given] 20 mol Al₂O₃
Step 2: Identify Conversions
[RxN] 2 mol Al₂O₃ → 4 mol Al
Step 3: Stoich
[DA] Set up: [tex]\displaystyle 20 \ mol \ Al_2O_3(\frac{4 \ mol \ Al}{2 \ mol \ Al_2O_3})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 40 \ mol \ Al[/tex]Step 4:Check
Follow sig fig rules and round. We are given 1 sig fig.
Since our final answer already has 1 sig fig, there is no need to round.
explain what keeps the electrons confined in the space surrounding the nucleus
Answer:
Electrons are trapped inside the atom because of the attraction forces with positively charged protons that are found in the nucleus.
HELLPP!!!
What property allows objects to be subject to gravity?
friction
mass
inertia
acceleration
Answer: i gotcu the answer is mass
Explanation: The more weight of the object the more its subject to gravity like a feather barley is while a bowling ball smashes into the ground :D
The property allows objects to be subject to gravity is mass. Therefore, option B is correct.
What is mass ?Mass is a physical body's total amount of matter. Inertia, or the body's resistance to acceleration when a net force is applied, is also measured by this term.
The strength of an object's gravitational attraction to other bodies is also influenced by its mass. The kilogram serves as the SI's fundamental mass unit. The amount of matter object present is also known as mass.
The amount of matter that makes up every item or body is the greatest way to understand mass. Everything that we can see has mass. Examples of objects with mass include a table, a chair, your bed, a football, a glass, and even air. The mass of a thing determines whether it is light or heavy.
Thus, option B is correct.
To learn more about mass follow the link below;
https://brainly.com/question/19694949
#SPJ2
What is Temperature
Choose 1
Answer:
B. A measure of the average kinetic energy of a substance.
Explanation:
Temperature is a measure of the average kinetic energy of the particles in an object.
Brainlist pls!
Why is systems thinking important?
Systems thinking ignores the details of a system and just looks at its overall function.
Systems thinking ranks the parts of a system in terms of most important to least.
Systems thinking allows us to understand all the parts that make up the whole system.
Systems thinking examines how a system affects human life.
Answer:
Systems thinking allows us to understand all the parts that make up the whole system.
Explanation:
Just took the test
The systems thinking important because, Systems thinking allows us to understand all the parts that make up the whole system. Therefore, option C is correct.
What system thinking ?By considering the world's complexity in terms of links and entire rather than breaking it down into its component components, systems thinking helps us make sense of how complicated the world is. It has been applied as a method for investigating and producing efficient action in challenging situations.
By using a deeper grasp of the surrounding structure and its constituent parts rather than relying just on previous events, systems thinking gives a technique to more accurately forecast future outcomes.
Systems thinking is a discipline in management that focuses on understanding a system by looking at the connections and interactions between the different parts that make up the entire of that defined system. The concept of the "entire system" is a way of looking at an entire organization in relation to its surroundings.
Thus, option C is correct.
To learn more about system thinking, follow the link;
https://brainly.com/question/17174999
#SPJ2
You arrive at English class 45 seconds after leaving math which is 100
meters away. How fast did you travel?
Answer:
4.97097
Explanation:
You traveled 4.97097 mph.
if an element number has a mass number of 244 and an atomic number of 94, how many neutrons does the element have
19)
Why are unique atomic spectra produced by different elements?