22 ft
30 ft
Find the area of each triangle

When the explanatory variable is categorical and the response variable is quantitative, a box plot or a bar plot would be appropriate to display the relationship between the two variables.

When the explanatory variable is categorical and the response variable is quantitative, a box plot or a bar plot would be appropriate.

A box plot (also known as a box-and-whisker plot) displays the distribution of the response variable within each category of the explanatory variable. It shows the median, quartiles, and outliers of the data, making it useful for visualizing differences in central tendency and spread between categories.

A bar plot (also known as a bar chart) displays the mean, median, or sum of the response variable for each category of the explanatory variable. It is useful for comparing the values of the response variable between categories.

Both box plots and bar plots are effective in displaying the relationship between a categorical variable and a quantitative variable. The choice between the two would depend on the specific research question, the nature of the data, and the intended audience.

Learn more about explanatory variable here

brainly.com/question/17562805

#SPJ4

These plots help visualize the distribution of the quantitative response variable across different categories in the explanatory variable.

When the explanatory variable is categorical and the response variable is quantitative, a bar chart or a box plot would be appropriate. A bar chart displays the mean or median of each category, while a box plot displays the distribution of each category including the median, quartiles, and outliers. These plots help to visualize the relationship between the categorical and quantitative variables and identify any patterns or differences between categories.
When the explanatory variable is categorical and the response variable is quantitative, an appropriate type of plot to use would be a box plot or a violin plot. These plots help visualize the distribution of the quantitative response variable across different categories in the explanatory variable.

learn more about explanatory variable

https://brainly.com/question/29820449

#SPJ11

A) The coefficient of determination can be computed using the SSE and SST values in regression and correlation analysis.

SSE (Sum of Squared Errors) is the sum of the squared differences between the actual and predicted values of the dependent variable. SST (Total Sum of Squares) is the sum of the squared differences between the actual values of the dependent variable and their mean.
The coefficient of determination, denoted as R², measures the proportion of the variance in the dependent variable that can be explained by the independent variable(s) in a regression model.

It is calculated as follows:
R² = 1 - (SSE/SST)
Since both SSE and SST are given, you can compute the coefficient of determination.

However, the information provided is not sufficient to calculate the slope, Y-intercept, or X-intercept of the regression line.

Based on the given information, the correct answer is:
A) Coefficient of determination can be computed.

For similar question on coefficient.

https://brainly.com/question/17237825

#SPJ11

This coefficient of determination (R²) gives you a measure of how well the regression line fits the data in your correlation analysis.

A) The coefficient of determination can be computed with the known values of SSE (sum of squared errors) and SST (total sum of squares) in regression and correlation analysis. The coefficient of determination is a measure of how well the regression line fits the data and is expressed as a percentage. It represents the proportion of variability in the dependent variable (Y) that can be explained by the independent variable (X).

Based on the information provided, with the known SSE (Sum of Squares Error) and SST (Sum of Squares Total), you can compute the coefficient of determination. So, the correct answer is:

A) Coefficient of determination can be computed

To calculate the coefficient of determination (R²), follow these steps:

1. Calculate the Sum of Squares Regression (SSR) by subtracting SSE from SST:
  SSR = SST - SSE

2. Compute the coefficient of determination (R²) by dividing SSR by SST:
  R² = SSR / SST

This coefficient of determination (R²) gives you a measure of how well the regression line fits the data in your correlation analysis.

to learn more about coefficients click here:

https://brainly.com/question/29174258

#SPJ11

Answer:

y=2/3x-6 1/3

Step-by-step explanation:

y+1=2/3(x-8)

first do the distributive property.

2/3*x=2/3x

2/3*-8= -5 1/3

2/3x-5 1/3

then we subtract 1 from both sides

y=2/3x-6 1/3

For the experiment of birth of children,

a) Sample space is S = { G, BG, BBG, BBBG, BBBB}.

b) The probability for each of the simple events in the sample space, 0.5, 0.25, 0.125, 0.0625 and 0.0625.

c) The probability distribution function for X is 0.5, 0.25, 0.125, 0.0625 and 0.0625.

d) The table form of probability density function is present in above figure.

We have a woman who decides to have children until she has first a baby girl or until she has four children, which event occurred.

a) Sample space is S = { G, BG, BBG, BBBG, BBBB} where G and B represents the birth of baby boy and baby girl.

b) Since, birth become independent so P( B) = P( G) = 0.5. Using multiplcation rule, the probability for each of the simple events, P( G) = 0.5

P( BG) = P( B) P(G) = 0.25

P( BBG) = P(B)× P(B)× P(G) = 0.125

P( BBBG) = P(B)× P(B)× P(B) ×P(G)

= 0.0625

P( BBBB) = P(B)× P(B)× P(B) ×P(B)= 0.0625

c) Let X be a variable such that it denotes number of children. So, X can take value from set { 1,2,3,4}.

The probability of a girl child is for each birth = 0.5

Therefore, P( X = 1) = { only 1 girl} = P( G)

= 0.5

P(X = 2) = { one boy and one girl } = P( BG) = P(B) P(G) = 0.25

P( X = 3) = { two boys one girl } = P( BBG) = 0.125

P( X = 4) = { three boys one girl or four all boys } = P( BBBG) + P( BBBB) = 0.0625 + 0.0625

= 0.125

So, the above values of probability distribution function for random variable X.

d) A table form picture of the probability distribution function for X is present in above figure. Hence, the required table is known.

For more information about probability distribution function, visit :

https://brainly.com/question/25301796

#SPJ4

a) option 4-t test for one mean.

b) Null hypothesis: μ_Shadyside - μ_Oakland <= 0 (Mean monthly rent of apartments in Shadyside is not higher than in Oakland).

Alternative hypothesis: μ_Shadyside - μ_Oakland > 0 (Mean monthly rent of apartments in Shadyside is higher than in Oakland).

a) The most appropriate statistical test for this scenario would be (vi) test for two independent means, also known as two-sample t-test. This test is used to compare the means of two independent samples to determine if they are significantly different from each other. In this case, we are comparing the mean monthly rent of apartments in Shadyside and Oakland, and we have two independent samples.

b) The appropriate hypotheses for the two-sample t-test are as follows:

Null hypothesis: The mean monthly rent of apartments in Shadyside is equal to the mean monthly rent of apartments in Oakland.

Alternative hypothesis: The mean monthly rent of apartments in Shadyside is greater than the mean monthly rent of apartments in Oakland.

Symbolically, the null hypothesis can be represented as H0: µ1 = µ2, where µ1 and µ2 represent the population means of monthly rent in Shadyside and Oakland, respectively.

The alternative hypothesis can be represented as Ha: µ1 > µ2, indicating that the population mean of monthly rent in Shadyside is greater than the population mean of monthly rent in Oakland

To know more about mean visit:

https://brainly.com/question/31101410?referrer=searchResults

#SPJ4

The total area is given as 30 sq units.

A composite figure is a two-dimensional shape that is made up of two or more simpler shapes, such as squares, rectangles, triangles, circles, or trapezoids. The area of a composite figure is the total amount of space that is enclosed within its boundaries.

To find the area of a composite figure, you need to first identify all of the individual shapes that make up the figure. Then, you can find the area of each shape using the appropriate formula. Finally, you add up the areas of all the shapes to get the total area of the composite figure.

Read more about area here:

https://brainly.com/question/2607596

#SPJ1

The required domain of the given function f(x) = √x+4 is (D) {x|x ≥ -4} respectively.

The domain of a function is the set of values that we are allowed to enter into our function.

This collection includes the x values for functions like f(x).

The set of values that a function can accept as input is known as its range.

The function outputs this list of values once we enter an x value.

Think about the equation y = f(x), where x and y are the independent and dependent variables.

If a value for x successfully enables the creation of a single value y using another value for x, it is said to be in the domain of the function f.

Considering the function's expression:

f(x) = √x+4

We are aware that the set of input values for which the function is real and defined constitutes the function's domain.

We are aware that for the function to continue to be defined, the value included within the radical expression must be larger than or equal to 0.

x+4 ≥ 0

Take 4 off of both sides.

x+4-4 ≥ 0-4

x ≥ 4

Then, the domain is:
{x|x ≥ -4}

Therefore, the required domain of the given function f(x) = √x+4 is (D) {x|x ≥ -4} respectively.

Know more about the domain here:

https://brainly.com/question/26098895

#SPJ1

Correct question:

The graph of the function f(x)=V x+4 is shown below. The domain of the function?

The correct option is the fourth one, the slope and y-intercept are different.

Here we have the linear equation:

3x - 5y = 4

We know that it is dilated by a scale factor of 5/3, so let's find the dilation.

We can rewrite the linear equation as:

-5y = 4 - 3x

y =  (3/5)x - 4/5

Now let's apply the dilation:

y = (5/3)*[ (3/5)x - 4/5]

y = x - 4/3

Then we can see that the slope and the y-intercept are different, the correct option is 4.

Learn more about linear equations at.

https://brainly.com/question/1884491

#SPJ1

The only restriction on the domain of the expression is that x cannot be equal to -3. In interval notation, the domain is:

(-∞, -3) U (-3, ∞)

In mathematics, the domain of a function is the set of all possible input values (often x-values) for which the function is defined. It is the set of values that can be plugged into the function to produce a valid output (often y-values).

The expression [tex](x^2 + 3x - 5) / (x^2 + 6x + 9)[/tex] can be simplified as:

[tex](x^2 + 3x - 5) / (x + 3)^2[/tex]

The denominator is [tex](x + 3)^2[/tex], which is always positive. Therefore, the expression is defined for all real values of x except when the denominator is zero, which occurs when:

x + 3 = 0

Solving for x, we get:

x = -3

Therefore, the only restriction on the domain of the expression is that x cannot be equal to -3. In interval notation, the domain is:

(-∞, -3) U (-3, ∞)

To know more about domain visit:

https://brainly.com/question/26098895

#SPJ1

a) Function f(x) = 2^x is an exponential growth function because a = 2 is greater than 0 and b = 2 is greater than 1. The graph of the function starts at (0,1) and increases rapidly as x increases.

b) Function f(x) = (1/2)^x is an exponential decay function because a = 1/2 is greater than 0 and b = 1/2 is between 0 and 1. The graph of the function starts at (0,1) and decreases rapidly as x increases.

Key features of both graphs:

Learn more about exponential growth function  at:

https://brainly.com/question/11487261

#SPJ1

Trigonometric ratios allow us to determine the value of Cos²θ to be = 5/9. As a result, choice D is the best one.

Triangle side ratios are known as ratios of trigonometry. These ratios demonstrate how a right triangle's edges to angles ratio functions in mathematics. The sine, cosine, and tangent trigonometric ratios are the fundamental three. The sin, cos, and tan functions can be used for calculating the other significant trig ratios, cosec, sec, and cot.

Here in the question,

Sinθ = 2/3

Now,

Cos²θ = 1 - Sin²θ

= 1- (2/3) ²

= 1 - 4/9

= (9-4)/9

= 5/9

Therefore, the value of Cos²θ = 5/9.

Option D is the correct option.

To know more about trigonometric ratios, visit:

brainly.com/question/25122825

#SPJ1

The complete question is:

Given: sinθ = 2/3 and is in the second quadrant; evaluate the following expression: cos²θ

a). -7/9

b). -1/9

c). 1/9

d). 5/9

Your score on the Biology test is 94.

If you scored 2 deviations above the mean, that means your score is 2 standard deviations above the mean. Since the standard deviation is 8, 2 standard deviations above the mean is:

2 * 8 = 16

Thus, your score on the test is:

78 + 16 = 94

Therefore, your score on the Biology test is 94 if you scored 2 deviations above the mean with a standard deviation of 8.

Learn more about mean on:

https://brainly.com/question/1136789

#SPJ1

The total area of the four offices in the building is 1296 square feet.

When we talk about the area of a shape, we are referring to the amount of space that it occupies. In this case, since the offices are squares, we can find the area of each office by multiplying the length of one side by itself. This is represented by the formula A = s², where A is the area and s is the length of one side.

So, if each office has a side length of 18 feet, we can find the area of one office by plugging that value into the formula: A = 18² = 324 square feet.

Since there are four offices, we can find the total area of all four offices by multiplying the area of one office by 4: 324 square feet x 4 = 1296 square feet.

To know more about area here

https://brainly.com/question/14994710

#SPJ4

After rounding , The calculated result of 15.58 - 7.237 is therefore around  8.4

When a number is rounded, it is approximated by using a smaller, more straightforward number that is near to the original value. For instance, 3.141 is the result of rounding 3.14159 to two decimal points.

We can round 15.58 to 15.6 and 7.237 to 7.2 to estimate 15.58 - 7.237 by first rounding each number to the nearest tenth

. After that, we may take 7.2 away from 15.6 to get:

15.6 - 7.2 = 8.4

The calculated result of 15.58 - 7.237 is therefore around  8.4

To know more about round visit:

brainly.com/question/29878750

#SPJ1

The Earth is estimated to be around 4.54 billion years old, while the oldest known rocks found on Earth date back to about 4 billion years ago.

Determining the age of the Earth is a complex process that involves a variety of scientific disciplines. Geologists and other scientists have used a variety of methods to estimate the age of the planet, including radiometric dating, which involves measuring the decay of radioactive isotopes in rocks and other materials.

The age of the oldest known rocks found on Earth has also been determined using radiometric dating techniques. These rocks, which are primarily found in Western Greenland, have been dated to around 3.8 to 4.0 billion years old. The rocks are believed to have formed during the Hadean Eon, a period of Earth's history when the planet was still in its early stages of formation and was subject to intense meteorite bombardment.

It's important to note that the age of the Earth and the age of the oldest known rocks found on its surface are not precise measurements.

To know more about age here

https://brainly.com/question/16413425

#SPJ4

However, 2/7 is not equivalent to any fraction with denominator 6. Therefore, Maria's claim is incorrect.

A fraction is a way of representing a part of a whole or a ratio between two quantities. It consists of two numbers, the numerator (located above the fraction line) and the denominator (located below the fraction line), separated by a horizontal fraction bar. The numerator represents the number of parts of the whole or the ratio, while the denominator represents the total number of equal parts or the denominator of the ratio.

For example, the fraction 3/4 represents three out of four equal parts or three parts out of a total of four parts. It can also be interpreted as a ratio of three to four. Fractions can be simplified by dividing both the numerator and denominator by their greatest common factor. For instance, the fraction 6/8 can be simplified to 3/4 by dividing both the numerator and denominator by 2.

A counterexample to Maria's claim is the fraction 2/7.

To see this, note that 1/5 is equivalent to 14/70 and 1/7 is equivalent to 10/70. Therefore, any fraction between 1/5 and 1/7 can be expressed in the form n/70, where 10 < n < 14.

However, 2/7 is not equivalent to any fraction with denominator 6. Therefore, Maria's claim is incorrect.

Learn more about fraction below.

https://brainly.com/question/17220365

#SPJ1

Answer:

7.5 cm.

Step-by-step explanation:

The height of a rectangle can be calculated using the rectangle's base and area using the following formula:

height = area / base

This formula can be derived from the formula for the area of a rectangle:

area = base x height

By rearranging this formula, we get:

height = area / base

Therefore, if we know the area and base of a rectangle, we can use this formula to calculate its height.

1) rewrite

Height = are / base

2) plug in

h = 30 cm / 4 cm

3) solve (divide)

height = 7.5 cm

Therefore, the height of the rectangle is 7.5 cm.

To price the derivative using the two-period binomial model, we need to calculate the expected payoff of the derivative using the risk-neutral probabilities.

The possible outcomes for the two-period binomial model are H and T,  there are four possible states of the world: HH, HT, TH, and TT.

To calculate the expected payoff we need to calculate the probability of each state occurring. The probability of HH occurring is pp=0.60.6=0.36, the probability of HT and TH occurring is pq+qp=0.60.4+0.40.6=0.48, and the probability of TT occurring is qq=0.40.4=0.16.

Next, we can calculate the expected payoff in HH and TT states, the derivative pays off 1, and in the HT and TH states, the derivative pays off 0. The expected payoff of the derivative in the HH and TT states is 10.36=0.36, and the expected payoff in the HT and TH states is 00.48=0.

We need to discount the expected payoffs back to time 0 using the risk-neutral probabilities.

The probability of that state occurring multiplied by the discount factor, which is 1/(1+r), where r is the risk-free interest rate.

Since this is a risk-neutral model, the risk-free interest rate is equal to 1. Therefore, the risk-neutral probability of each state occurring is

HH: 0.36/(1+1) = 0.18

HT/TH: 0.48/(1+1) = 0.24

TT: 0.16/(1+1) = 0.08

Finally, we can calculate the price of the derivative

Price = 0.181 + 0.240 + 0.240 + 0.081 = 0.26

Therefore, the price of the derivative is 0.26.

For similar question on two-period binomial model

https://brainly.com/question/9362207

#SPJ11

1. Chicken became the key product that drove the creation of the Interstate Highway System, which led to the dominance of American trucks in the US truck market.

2. A party may want to impose a tariff to protect domestic industries from foreign competition or to generate revenue for the government.

3. A party is usually trying to protect domestic industries, but a tariff on automobiles would hurt both domestic consumers who would pay higher prices and foreign producers who would face reduced demand.

4. Competition encourages innovation by providing incentives for companies to improve their products and services to stay ahead of their rivals; American trucks stayed the same because they faced little competition due to protectionist policies.

5. Foreign companies tried to get around American-imposed tariffs on automobiles by establishing factories in the US, forming joint ventures with American companies, or exporting through third countries.

6. The methods used to get around tariffs can be efficient in the short term, but they may not be sustainable or desirable in the long term as they can lead to trade imbalances and undermine the competitiveness of domestic industries.

7. Tariffs can be used as a bargaining chip to negotiate better trade deals, but they should be imposed judiciously and only as a last resort to avoid damaging the economy and harming consumers.

1. In the podcast, chicken is cited as the reason why American trucks dominate the truck market in the United States.

This is because in the 1960s, the government imposed regulations on the trucking industry that limited the amount of weight a truck could carry.

To get around these regulations, the industry started using smaller trucks to transport goods, which were often not strong enough to handle the weight.

However, they found that if they put chicken on the back of the trucks, the weight of the cargo would distribute more evenly and the smaller trucks could handle the load.

This led to the development of the modern pickup truck, which is now a staple of the American automobile market.

2. Parties may want to impose tariffs for various reasons, such as to protect domestic industries and jobs from foreign competition, to raise revenue for the government, or to level the playing field in international trade.

Two specific reasons for imposing tariffs could be to protect national security interests or to address unfair trade practices by other countries.

3. Tariffs are usually imposed to protect domestic industries and jobs, and the parties that are being protected are typically the producers of the goods or services in question.

However, tariffs can also harm consumers who may have to pay higher prices for imported goods or may have fewer choices in the marketplace. For example, if a tariff is imposed on automobiles, domestic car manufacturers may benefit, but consumers may have to pay more for cars, and foreign automakers may lose market share.

4. Competition encourages innovation by creating incentives for companies to improve their products or services to gain a competitive advantage.

In the case of American trucks, the lack of competition may have contributed to their lack of innovation over the years. Since they dominated the market, there was little pressure to improve or innovate, and as a result, they have largely stayed the same.

However, the rise of foreign competition in recent years has led American truck manufacturers to invest more in innovation to stay competitive.

5. Foreign companies have tried to get around American-imposed tariffs on automobiles in various ways, such as by moving production to countries not subject to the tariffs, by exporting parts and assembling them in the United States, or by lobbying the government for exemptions or tariff reductions.

6. The methods used by foreign companies to get around tariffs may not be efficient for the economy as a whole because they can lead to higher costs and inefficiencies in the supply chain.

However, they may be necessary for individual companies to remain competitive in the short term.

Ultimately, a more efficient solution would be to address the root causes of the trade imbalances that lead to tariffs in the first place.

7. A tariff can be used as a bargaining chip by threatening to impose tariffs on imports from a country unless they make concessions in trade negotiations.

While this can be an effective strategy in certain situations, it can also lead to a trade war and harm both economies.

In general, tariffs should be used sparingly and as a last resort, and efforts should be made to address underlying trade issues through diplomacy and negotiation.

For similar question on regulations.

https://brainly.com/question/29618671

#SPJ11

The domain is all real numbers, range is all positive real numbers. As x decreases, h(x) will decrease. As x increases, h(x) will increase.

The domain of the exponential function h(x) = 125x is all real numbers, as x can take on any value.

The range of the function is all positive real numbers, as the base (125) raised to any power (x) will always be positive.

As x decreases, h(x) will decrease. This is because when the base of an exponential function is greater than 1, as is the case here with 125, the function increases as the exponent increases, and decreases as the exponent decreases. So, as x becomes more negative, h(x) becomes smaller.

As x increases, h(x) will increase. This is because, as mentioned above, when the base of an exponential function is greater than 1, the function increases as the exponent increases. So, as x becomes more positive, h(x) becomes larger.

Overall, the function h(x) = 125x is an increasing function with a domain of all real numbers and a range of all positive real numbers.

To learn more about exponential function click on,

https://brainly.com/question/28028689

#SPJ1

Answer:  B.

200,237.36

Step-by-step explanation: just got it right on the quiz

Here are the general steps for using the u-substitution method to evaluate a definite integral:

1. Identify a part of the integrand that looks like the derivative of another function.

This is usually denoted as u, and u should be a function that is easy to integrate.

2. Replace the selected part of the integrand with u. In other words, substitute u for the expression inside the integral.

3. Take the derivative of u with respect to the variable of integration, and then multiply by dx to obtain du.

4. Replace dx with the expression in terms of du, using the relationship you found in step 3.

5. Rewrite the entire integral in terms of u and du, and simplify as much as possible.

6. Evaluate the integral using u and the limits of integration. Replace u with the original expression, and then evaluate the expression at the upper and lower limits of integration.

7. Substitute the values obtained in step 6 into the original equation to get the final answer.

The u-substitution method is a powerful technique for evaluating definite integrals.

The general idea behind the u-substitution method is to replace a complicated expression inside the integral with a simpler expression, which is equal to the original expression.

Here are the general steps for using the u-substitution method to evaluate a definite integral:

Let's take an example to illustrate these steps:

Evaluate the definite integral ∫[tex](2x + 1)^(3/2) dx from x = 1 to x = 2.[/tex]

Let u = 2x + 1.

Replace 2x + 1 with u in the integral to get ∫[tex]u^{3/2} dx.[/tex]

Take the derivative of u with respect to x to get du/dx = 2, and then multiply by dx to obtain du = 2dx.

Replace dx with 1/2 du.

Rewrite the entire integral in terms of u and du to get ∫[tex]u^{3/2} (1/2) du.[/tex]

Evaluate the integral using u and the limits of integration to get (2/5) [tex]u^{5/2}[/tex] from 3 to 5.

Substitute the values obtained in step 6 into the original equation to get the final answer, which is[tex](2/5) [(5^{5/2}- 3^{5/2}].[/tex]

Therefore, the value of the definite integral ∫[tex](2x + 1)^{3/2}[/tex]dx from x = 1 to x = 2 is approximately 6.243.

For similar question on substitution.

https://brainly.com/question/28384244

#SPJ11

By the ratio of teaspoons of powdered lemonade mix and cup of water, jayden mix will be more lemony.

Ratio is a mathematical comparison between two or more quantities, typically expressed as a fraction or a colon (:). It represents the relationship or proportion between the quantities being compared. Ratios are used to describe the relative size or amount of one quantity in relation to another.

According to the given information:

Based on the given information, we can determine that option B, Jayden's mix will be more lemony.

This is because the ratio of powdered lemon mix to water is the same for both Khloe and Jayden, which is 2 teaspoons of powdered lemon mix per cup of water. However, Jayden uses only 1 cup of water, whereas Khloe uses 5 cups of water. Therefore, Jayden's mix will have a higher concentration of powdered lemon mix per cup of water compared to Khloe's mix, making Jayden's mix more lemony in flavor.

To know more about ratio visit:https://brainly.com/question/13419413

#SPJ1

Answer:1288

Step-by-step explanation:

Answer:  1,288.

The Picture Below and the explanation

Step-by-step explanation: You Multiply 6 times 8 to get 48. Then you put 4 on top of 46. Next, you multiply 4 times 8 and add 4 to add 36 as two digits below the first line of multiplication. Next, you cross out the 8 then you do a new set of multiplication starting with 6 times two which is 12 carry the one above four in a different direction ( it might look like a capital I but it is just 1). Then, multiply 4 times 2 plus 1 is 9. Last, you add 368+920= 1,288 and there is your answer. I hope this will help.

Thus, we may estimate that there were 557 principals present at the meeting.

A mathematical comparison of two numbers is called a percentage. These figures frequently serve as a comparison between various objects or individuals. Take the scenario where you entered a crowded room as an example.

52/70 = 0.743 or 74.3%

Applying this ratio to the total number of attendees, we can extrapolate the proportion of principals at the conference, assuming that it is reflective of the conference as a whole:

Total principals at conference = Proportion of principals x Total number of attendees

Total principals at conference = 0.743 x 750

Total principals at conference ≈ 557

As a result, we may estimate that there were 557 principals present at the meeting.

To know more about the Proportion

https://brainly.com/question/1496357

#SPJ1

Answer:

153.47 Miles

Step-by-step explanation:

Starting with the total return fee you subtract the base fee from it

Then Divide the that total by .76

And there you go

Thanks for the Submission

Answer:

A) 11.66190379

B) 9.74679

C)10.24695

D)6.32455532

Step-by-step explanation:

All of these are done by using the equation A^2 + B^2 = C^2, C being the long side and a and b being the short side.

The problem "125×64" in expanded-form is written as (100 × 60) + (100 × 4) + (20 × 60) + (20 × 4) + (5 × 60) + (5 × 4).

In mathematics, the "Expanded-Form" is defined a way of representing a number as a sum of its constituent parts, usually using place value notation.

It involves expressing a number as the sum of its individual-digits or place value components, such as units, tens, hundreds, thousands, etc., multiplied by their respective place value powers of 10.

We have to write the product "125 × 64" in the expanded form,

So, the product "125 × 64" in expanded form can be written as :

⇒ 125 × 64 = (100 + 20 + 5) × (60 + 4),

⇒ (100 × 60) + (100 × 4) + (20 × 60) + (20 × 4) + (5 × 60) + (5 × 4),

Therefore, the expanded form of 125 × 64 is: (100 × 60) + (100 × 4) + (20 × 60) + (20 × 4) + (5 × 60) + (5 × 4).

Learn more about Expanded Form here

https://brainly.com/question/17837892

#SPJ4

The probability of not getting a purple after turning the spinner would be = 0.75

To calculate the probability of the given sample;

= possible outcome/sample space

where;

possible outcome = 3

sample space = 4

Probability = 3/4 = 0.75

Therefore, the probability of not getting a purple colour would be = 0.75

Learn more about probability here:

https://brainly.com/question/29660226

#SPJ1