(368-17(C)) Where devices or plug-in connections for tapping off feeder or branch circuits fro busways consist of an externally operable fusible switch, ropes, chains, or sticks shall be provided for operation of the disconnecting means from the floor.(True/False)

The values based on the information given will be Ra = 1000N and Rc= 90N

Weight refers to the measure of the force of gravity on an object, and is typically measured in units of mass, such as kilograms or pounds. Weight is influenced by the mass of the object and the strength of the gravitational field it is in.

Thickness, on the other hand, refers to the measure of how thick an object is, or the distance between opposite surfaces of an object. Thickness is typically measured in units of length, such as millimeters or inches.

While weight and thickness are not directly related to each other, they can both play important roles in determining the properties and uses of an object. For example, a thin piece of metal may be lightweight, but may not be strong enough to support heavy loads. Conversely, a thicker piece of metal may be heavier, but may be able to support heavier loads due to its increased strength.

Learn more about thickness on

https://brainly.com/question/4937019

#SPJ1

No, once a side initiates the close of a con-section by sending a FIN segment, it will not send any more segments. The FIN segment indicates that the side has finished sending data and is ready to close the connection.

The other side may still send data, but the initiating side will not send any more segments.After a side initiates the close of a connection by sending a FIN (finish) segment, it will not send any more data segments. However, it may still send and receive control segments, such as ACK (acknowledgment) segments, to properly close the connection in accordance with the TCP (Transmission Control Protocol) process. Here's a step-by-step explanation:

1. Side A initiates the close of the connection by sending a FIN segment to Side B.
2. Side B receives the FIN segment and responds with an ACK segment to acknowledge the receipt of the FIN segment.
3. Side B may still send data segments if needed until it's ready to close its side of the connection.
4. Once Side B is ready to close the connection, it sends its own FIN segment to Side A.
5. Side A receives Side B's FIN segment and sends an ACK segment to acknowledge it.
6. The connection is now closed on both sides.

In summary, after initiating the close of a connection by sending a FIN segment, a side will not send any more data segments but may still send and receive control segments like ACKs to complete the connection termination process.

Learn more about initiates here: brainly.com/question/15396694

#SPJ11

Based on your question, it sounds like you are asking which layer of the TCP/IP model is responsible for supporting the transmission of data for email and web pages, the layer responsible for this would be the: A) application.

This layer handles the communication protocols and interface between the applications and the network. Specifically, it is responsible for packaging the data into a format that can be sent over the network and ensuring that it is sent to the correct destination.

The data link layer (B) is responsible for the physical transmission of data over the network, while the transport layer (C) is responsible for ensuring the reliable delivery of data between applications. The network layer (D) is responsible for routing and forwarding data packets between networks.

So the correct answer is: A. Application.

Learn more about TCP/IP: https://brainly.com/question/14280351

#SPJ11

The off-delay timer (TOF) starts timing when the ladder rung switches from true to false. b.

The off-delay timer (TOF) is a type of timer used in programmable logic controllers (PLCs) that delays the turning off of an output signal.

This timer starts timing when the ladder rung switches from true to false.

This means that when the input signal that is connected to the ladder rung turns off, the timer will start counting.

The off-delay timer is used when there is a need for a delay before an output signal is turned off.
The accumulated value of the off-delay timer is used to keep track of the time delay.

This value increases as the timer counts and reaches its preset value when the time delay is complete.

The accumulated value equals its preset value, the output signal is turned off.
It is important to note that the accumulated value must be greater than its preset value before the output signal can be turned off.

This is because the timer needs to complete its full-time delay before the output can be turned off.

The timer uses the accumulated value to keep track of the time delay and turns off the output signal when the accumulated value equals its preset value and is greater than the present value.

For similar questions on timer

https://brainly.com/question/1522594

#SPJ11

The coil that serves the inside of the house in a heat pump is known as the evaporator coil/ indoor coil.

In a heat pump system, the indoor coil is an essential component that is responsible for transferring heat between the refrigerant and the indoor air.

Thus, the coil that serves the inside of the house in a heat pump is known as the evaporator coil/ indoor coil.  

Know more about the  evaporator

https://brainly.com/question/31562018

#SPJ11

Answer: When part of an Internet VoIP transmission is not delivered to the destination, it can result in poor call quality or dropped calls. VoIP technology relies on packet switching, which means that data is broken down into small packets and sent across the Internet to its destination

Explanation: If some of these packets are lost or delayed in transit, it can cause disruptions in the call. VoIP protocols include mechanisms to detect and retransmit lost packets, but if the loss is significant, it can still affect the overall call quality.

When part of an Internet VoIP transmission is not delivered to the destination, the following occurs:

1. Packet loss: During the transmission, data packets containing voice information may be lost or dropped due to network congestion, poor connection, or other issues.

2. Degraded audio quality: The destination receives an incomplete set of data packets, leading to audio artifacts such as choppiness, distortion, or reduced clarity.

3. Retransmission attempts: The VoIP system may attempt to retransmit the missing data packets to improve audio quality at the destination.

4. Error correction: If the VoIP system uses error correction techniques, it may attempt to reconstruct the missing data based on the received packets, mitigating the impact on audio quality.

5. Impact on communication: The overall communication experience may be negatively affected due to the missing part of the transmission, making it difficult for the participants to understand each other.

Learn more about transmission at : brainly.com/question/31063222

#SPJ11

According to section 372.10 of the National Electrical Code (NEC), cellular concrete floor raceways are required to have certain conductor size limitations. Specifically, no conductor larger than a certain size is permitted to be installed in the raceway. The exact size limitation is specified as part of the code requirements.

For such more question on limitations

https://brainly.com/question/28435088

#SPJ11

The router interface that should be used for direct remote access to the router via a modem is typically the console port.

The router interface that should be used for direct remote access to the router via a modem is typically the console port. This interface allows for direct access to the router's command-line interface (CLI) and can be used to configure the router remotely. It is important to note that the console port is typically used for initial configuration and troubleshooting, and remote access should be secured using appropriate authentication and encryption methods to prevent unauthorized access.

Learn more about remote access  here

https://brainly.com/question/28900477

#SPJ11

The objective is to find the final temperature and pressure of a nonideal gas in an isolated chamber with a partition. The steps to solve it involve setting up and simplifying energy and entropy balances.

The problem involves an isolated chamber with two compartments divided by a partition that allows the transfer of heat. One compartment contains a non-ideal gas while the other is a perfect vacuum.

After the partition is ruptured, the system is allowed to reach equilibrium, and the final temperature and pressure need to be determined. To solve the problem, energy balance and entropy balance equations are set up and simplified.

Departure functions are then derived to find the final pressure and temperature. The gas follows a particular equation of state, PV/RT = 1+ (b - a/T)P/RT, where b, a, and CP are given constants.

Finally, the final pressure and temperature of the system are determined using the derived formulas for the departure functions.

Learn more about objective

brainly.com/question/14964361

#SPJ11

The statement "The output of the counter is energized whenever the accumulated count is less than or equal to the preset count" is true because a counter is a digital device that counts the number of input pulses received. It consists of flip-flops, which are interconnected in a specific arrangement to achieve the desired counting sequence.

The counter has an accumulated count, which represents the total number of pulses received thus far, and a preset count, which is a predetermined value that is set by the user.

When the accumulated count is less than or equal to the preset count, the output of the counter is energized, indicating that the desired count has been reached or has not yet been exceeded. This is because the counter's main function is to keep track of the input pulses and provide an output signal when a specific count is achieved. In this case, the counter acts as a comparator, comparing the accumulated count to the preset count, and energizing the output when the condition is met.

To summarize, the output of the counter being energized whenever the accumulated count is less than or equal to the preset count is a true statement, as it accurately describes the behavior of a counter in relation to its accumulated and preset counts. This behavior is essential for various applications, such as measuring the frequency of a signal or controlling the timing of events in a digital system.

You can learn more about the accumulated count at: brainly.com/question/30784277

#SPJ11

When it comes to constructing secure rooms and vaults, it is important to ensure that they meet GSA approved standards.

GSA, or the General Services Administration, sets the standards for secure facilities in order to ensure the protection of sensitive information and assets. These standards cover a wide range of requirements, such as the materials used in construction, the layout of the space, and the types of locks and other security measures that must be in place. By meeting these standards, organizations can be confident that their secure rooms and vaults are providing the level of protection needed to safeguard their assets and information.

To learn more about secure click the link below:

brainly.com/question/28926575

#SPJ11

A sine wave has two maximum points (peaks) during one cycle: one positive maximum and one negative maximum.

A sine wave's peak to peak value is twice its peak value. As a result, the waveform's total peak to peak value is 2 x 80 VAC, or 160 VAC.

A sine wave's peak to peak value is a crucial indicator of the waveform's amplitude. It is determined by multiplying the waveform's peak value by two. Given that the peak value of this specific waveform is 80 VAC, its peak to peak value is 2 x 80 VAC, or 160 VAC. This peak to peak value represents the total number of voltage swings experienced by the waveform from its base to its crest. This waveform's peak to peak value is a helpful

Learn more about peaks here

https://brainly.com/question/30491931

#SPJ11

During normal operation, most Cisco routers run the IOS (Internetwork Operating System) from the Flash memory location. This is where the IOS image is stored and loaded during the router's boot-up process.

An exclusive operating system known as Cisco IOS (Internetwork Operating System) is used by Cisco Systems' routers and switches. The primary function of Cisco IOS is to facilitate data communication between network nodes.               An operating system is a piece of system software that manages the hardware, software, and resources of a computer. Operating systems are used by computers, smartphones, video games, and other devices.

Hardware identification, multiprocessing, protocol, and processor support are all examples of basic operating system support. sharing of software and a printer. sharing a same database and file system. features for access control and user authentication in networks.

A "Network Operating System" is an operating system that includes associated protocols and applications to enable quick and inexpensive communication.

Learn more about internetwork operating system here

https://brainly.com/question/28991932

#SPJ11

The difference in water surface elevations between reservoir A and reservoir B is 1.88 ft, with the negative sign indicating that reservoir B is at a higher elevation than reservoir A.

Determining the difference in water surface elevations between reservoir A and reservoir B, use the Bernoulli equation, which relates the pressure, velocity, and elevation of a fluid flowing in a pipe.

The Bernoulli equation can be expressed as:

P1/γ + V1²/(2g) + z1 = P2/γ + V2²/(2g) + z2 + hf

where P is the pressure of the fluid, γ is the specific weight of the fluid, V is the velocity of the fluid, g is the acceleration due to gravity, z is the elevation of the fluid, and hf is the head loss due to friction.

Supposing there is fully turbulent flow, use the Darcy-Weisbach equation to calculate the head loss due to friction:

hf = f * (L1/D1) * (V1²/2g)

where f is the Darcy-Weisbach friction factor, L is the length of the pipe, and D is the diameter of the pipe.

We can also use the coefficient of sudden contraction to relate the velocities at the entrance and exit of the second pipe:

V2 = C * √(V1² - Vc²)

where C is the coefficient of sudden contraction and Vc is the velocity of the fluid at the entrance of the second pipe.

Substitute the given values and solve for the difference in water surface elevations:

P1 = P2 (since the two reservoirs are open to the atmosphere, the pressures cancel out)

γ = 62.4 lb/ft³ (the specific weight of water)

Vc = 22.5 cfs / (π/4 * (2 ft)²) = 1.41 ft/s (the velocity of the fluid at the entrance of the second pipe)

f = 0.001 (the friction factor for cast iron pipes)

C = 0.36 (the coefficient of sudden contraction)

g = 32.2 ft/s² (the acceleration due to gravity)

L1 = L2 = 500 ft (the lengths of the pipes)

D1 = 2 ft and D2 = 1.5 ft (the diameters of the pipes)

V1 = 22.5 cfs / (π/4 * (2 ft)²) = 2.83 ft/s (the velocity of the fluid at the entrance of the first pipe)

V2 = C * sqrt(V1² - Vc²) = 1.79 ft/s (the velocity of the fluid at the exit of the second pipe)

Using the Bernoulli equation:

z1 - z2 = (V2² - V1²)/(2g) - hf

Substituting the values:

z1 - z2 = (1.79² - 2.83²)/(2 * 32.2) - 0.001 * 500/2 * (2.83²)/(2 * 32.2) - 0.001 * 500/2 * (1.79^2)/(2 * 32.2)

z1 - z2 = -1.88 ft

Therefore, the difference in water surface elevations between reservoir A and reservoir B is 1.88 ft, with the negative sign indicating that reservoir B is at a higher elevation than reservoir A.

learn more about water surface elevations: https://brainly.com/question/21030021

#SPJ1

A gold-leaf electroscope is a scientific instrument used to detect the presence and magnitude of electric charge.

The electroscope consists of a glass jar with a metal rod passing through the lid, ending in a metal plate or knob. Two thin gold leaves are suspended from the bottom of the rod inside the jar.

When an electric charge is applied to the metal plate or knob, the charge is conducted through the metal rod and onto the gold leaves, causing them to repel each other and move away from each other. The degree of separation of the leaves indicates the strength of the charge.

The gold-leaf electroscope can be used to detect static electricity and also to distinguish between positive and negative charges. To do this, a known charge of opposite polarity is brought close to the electroscope and observed whether the gold leaves repel or attract each other.

Overall, the gold-leaf electroscope is a simple but effective instrument for detecting electric charges and studying their behavior.

Learn more about gold-leaf electroscope: https://brainly.com/question/30737553

#SPJ11

The types of communication that require parent/child process relationship are those that involve one process (the parent) spawning another process (the child) and then communicating with it through various means such as shared memory, pipes, or signals.

This type of communication is common in operating systems and software development, where a parent process may need to create and manage multiple child processes to perform specific tasks. Examples of such communication include interprocess communication (IPC), fork-exec model, and client-server architecture.
Hi! In the context of computer systems and programming, the types of communication that typically require a parent/child process relationship are inter-process communication (IPC) methods. These include, but are not limited to, pipes, message queues, shared memory, and sockets. Parent/child processes utilize these IPC methods to exchange information and coordinate their actions effectively.

Learn more about  communication here

https://brainly.in/question/32375161

#SPJ11

The correct answer is: Dynamic pressure, but varies with weight, bank angle, and pitch attitude.

The angle of attack at which a wing stalls is determined by the dynamic pressure of the air flowing over the wing, which is a function of airspeed and air density. However, this angle can be influenced by other factors such as weight, bank angle, and pitch attitude. For example, a heavier aircraft may require a higher angle of attack to maintain lift, while a steeper bank angle or a nose-up pitch attitude can also increase the angle of attack and potentially lead to a stall. Therefore, while dynamic pressure is the primary factor determining the stall angle, it is also affected by other variables. The angle of attack at which a wing stalls remains constant regardless of weight, dynamic pressure, bank angle, or pitch attitude.

Learn more about density here-

https://brainly.com/question/29775886

#SPJ11

The given statement "The counter accumulated value is the current count based on the number of times the ring goes from false to true." is false because the counter accumulated value is the current count based on the number of times the input signal goes from false to true.

The counter counts these rising edges and increments its accumulated value accordingly. For example, a counter with an accumulated value of 10 has counted 10 rising edges of the input signal. The counter can be reset to 0 using a reset signal, and can be preset to a specific value using a preset signal.

You can learn more about counter accumulated value at

https://brainly.com/question/30328887

#SPJ11

No parts of cord connection luminaries (fixtures), hanging luminaries, lighting track, pendants, or ceiling suspended (paddle) fans shall be located within a zone measured 3 feet horizontally and 8 feet vertically from the top of the bath tub rim or shower stall threshold. 410.10(d)

According to section 410.10(d) of the electrical code, no parts of cord connection luminaries (fixtures), hanging luminaries, lighting track, pendants, or ceiling suspended (paddle) fans shall be located within a zone measured 3 feet horizontally and 8 feet vertically from the top of the bath tub rim or shower stall threshold. This is to ensure that there is no risk of electrical shock or fire hazards due to proximity to water sources. It is important to follow these guidelines for safety reasons.A light fixture (US English), light fitting (UK English), or luminaire is an electrical device containing an electric lamp that provides illumination. All light fixtures have a fixture body and one or more lamps. The lamps may be in sockets for easy replacement—or, in the case of some LED fixtures, hard-wired in place.

learn more about luminaries here:

https://brainly.com/question/27632096

#SPJ11

Average TAT (Turnaround Time) and Maximum Wait Time can conflict when there are significant variations in the time taken to complete a task or service.

Average TAT is the average time taken to complete a task or service, which is calculated by dividing the total time taken to complete all tasks by the number of tasks completed. It gives an idea of how efficiently the tasks are being completed on average.
On the other hand, maximum wait time is the maximum amount of time a customer has to wait for a service. This is the longest time that any customer has to wait, regardless of how quickly the other customers are served.
If the maximum wait time is very high, it can result in customers becoming impatient and frustrated, which can lead to negative reviews and lost business. However, if the average TAT is very low, it may be because tasks are being rushed and not completed properly, leading to errors and dissatisfied customers.
Therefore, it is essential to strike a balance between the two metrics. This can be achieved by identifying the root causes of delays and working on them to improve efficiency, while also ensuring that the wait time is within acceptable limits for customers.

To know more about TAT (Turnaround Time) , click here:

https://brainly.com/question/5768680

#SPJ11

Answer : True. A restricted area must be properly marked to inform personnel they are in the vicinity of a restricted area. This helps to ensure that personnel are aware of the potential risks and take appropriate precautions while working in that area.

The majority of earthquake zones are distributed near or at tectonic plate boundaries, frequently in vicinity clusters. Most earthquakes are located within the Pacific Ocean's Ring of Fireplaces. Convergent or conservative barriers are linked to earthquakes that are most effective.

The majority of earthquakes will occur near any type of plate border. Massive earthquakes frequently begin at the plate boundaries. Around the arena, there could be an earthquake belt where plate motion causes earthquakes to rise. When tension or electricity is released from the crust, an earthquake is caused.

On the ridges, there seem to be a lot of shallow earthquakes. They are usuallyb, orange or yellow in colour, and shallow in depth.

Learn more about vicinity here

https://brainly.com/question/28542752

#SPJ11

The given statement "The counter reset (RES) instruction, it is always given the same address as the counter it is to reset." is true because the counter reset (RES) instruction is always given the same address as the counter it is to reset.

The RES instruction is used to reset the current value of a counter to its initial value, which is typically set to 0 or another predetermined value. In order to reset a specific counter, the RES instruction must be addressed to the same memory address as the counter. This ensures that the instruction is applied to the correct counter and that it resets the counter to the correct initial value. Therefore, the statement "the counter reset (RES) instruction is always given the same address as the counter it is to reset" is true.

You can learn more about RES instruction at

https://brainly.com/question/31568319

#SPJ11

Addressing needs, Scalability, Routing. IP addressing is a crucial component of modern networking, as it allows devices to communicate with each other across a network, and enables the routing of data across the Internet.

Addressing needs: One important consideration when planning the structure of an IP addressing scheme is addressing needs. This involves determining the number of devices that will require IP addresses on the network and how those addresses will be allocated. This is important to ensure that there are enough addresses to meet the needs of all devices on the network, without wasting address space.

Scalability: Another consideration when planning the structure of an IP addressing scheme is scalability. This involves designing the addressing scheme to accommodate future growth and expansion of the network. The addressing scheme should be flexible enough to allow for additional devices to be added without having to reconfigure the entire network.

Routing: The third important consideration when planning the structure of an IP addressing scheme is routing. This involves designing the addressing scheme to support efficient routing of traffic on the network. This includes designing the network so that traffic can be routed quickly and efficiently, with minimal delays or congestion. This can be achieved by dividing the network into smaller subnets, which can be more easily managed and routed.

Learn more about IP addressing  here:

https://brainly.com/question/30531412

#SPJ11

In a rapid recovery from a dive, the effects of load factor would cause the stall speed to increase.

This is because during a recovery from a dive, the aircraft is subjected to high G-forces, which increases the weight of the aircraft and thus increases the stall speed. The increase in load factor can also cause a decrease in lift, which further increases the stall speed. It's important for pilots to be aware of these effects and adjust their flying accordingly to avoid dangerous situations.Fast backup and instant recovery for demanding RTOs and RPOs. With Rapid Recovery, you can back up and quickly recover anything — systems, apps and data — anywhere, whether it’s physical, virtual or in the cloud. This data recovery software allows you to run without restore, with zero impact on your users, as if the outage or data loss never happened. Connect to cloud simply and easily, and protect growing virtual environments automatically.

learn more about rapid recovery here:

https://brainly.com/question/29727903

#SPJ11

In Python, the mathematical operator used to raise five to the second power is the double asterisk (**).  Your expression would look like this:5 ** 2`

Python is a high-level, interpreted programming language used for a wide range of applications, including web development, data analysis, artificial intelligence, and scientific computing. It has a simple and concise syntax, making it easy to learn and use, while also providing powerful programming capabilities. Python's standard library includes modules for tasks such as file I/O, regular expressions, and networking, while its extensive third-party library ecosystem offers a wealth of additional functionality. Python is an open-source language, which means that it is free to use, distribute, and modify. Its popularity has grown rapidly in recent years due to its ease of use, versatility, and large and supportive community of developers and users.

Learn more about Python here:

https://brainly.com/question/30365096

#SPJ11

Operator functions that perform object conversion, such as type casting or coercion, offer several benefits in programming:

1. Flexibility: They allow you to work with multiple data types, converting between them as needed, to avoid compatibility issues or make your code more versatile.

2. Readability: By explicitly stating the conversion, your code becomes more readable and understandable for others, as the intention behind the conversion is clear.

3. Safety: By using operator functions for conversion, you can handle data type errors or exceptions in a controlled manner, ensuring the stability and reliability of your code.

4. Reusability: Implementing conversion functions within an object or class enables you to reuse the same conversion logic across your codebase, leading to consistent behavior and easier maintenance.

5. Efficiency: By using built-in conversion functions or overloading operators, you can optimize performance by minimizing the overhead of type conversions.

Learn more about Operator functions from : brainly.com/question/27915566

#SPJ11

If the airspeed is increased from 89 knots to 98 knots during a coordinated level 45 degree banked turn, the load factor will decrease and the radius of turn will increase.

This is because increasing the airspeed during a turn reduces the amount of lift generated by the wings, which causes the load factor to decrease. Additionally, as the aircraft's speed increases, it needs to maintain a larger radius of turn to prevent stalling or losing control.However, increasing the airspeed will cause the aircraft to cover more ground in the same amount of time, which means that the radius of turn will increase in order to maintain the same rate of turn. This is because the lift required to maintain a constant turn is proportional to the square of the airspeed and inversely proportional to the radius of turn.

To learn more about radius click the link below:

brainly.com/question/29852948

#SPJ11

The Physical Security Officer/Provost Marshal is the entity responsible for ensuring the proper identifier and legal incorporation of security considerations.

The entity responsible for ensuring the proper identifier and legal incorporation of security considerations is the Security Enforcement entity, which may include Law Enforcement Officials, the Physical Security Officer/Provost Marshal, the Installation Commander/Facility Director, or the Operations Security Officer. Legal Officers may also provide guidance on the legal aspects of security enforcement. They work closely with law enforcement, operations, and other security-related personnel to maintain the safety and integrity of facilities and installations.
Their responsibilities include the installation, use, and maintenance of security equipment, from metal detectors to electronic monitoring. They may also interact with guests and staff for security reasons. Responsibilities include accessing guest and electronic information and overseeing all security.

Learn more about Identifier:

https://brainly.com/question/31494133

#SPJ11

Frames of switchgear and control assemblies shall be suitable for the content loaded within them. According to NEC 490.36, the frames must be able to withstand the weight and distribution of the equipment and components installed within the assemblies.

Properly designed and constructed frames are essential for the safe and reliable operation of switchgear and control assemblies. The frames must be able to protect the equipment from damage, provide adequate support, and allow for proper ventilation. As such, manufacturers of switchgear and control assemblies should pay close attention to the design and construction of the frames to ensure compliance with NEC 490.36 and the safety of the equipment. Frames of switchgear and control assemblies shall be content loaded.

Learn more about switchgear here: brainly.com/question/30745390

#SPJ11