The technician could use the "ipconfig /displaydns" command in the command prompt to show any cached DNS entries for the telnet site.
The technician could use the "ipconfig /displaydns" command in the command prompt to show any cached DNS entries for the telnet site. This will display a list of all recently accessed DNS entries, including the telnet site in question. If the entry is outdated or incorrect, the technician can then flush the DNS cache using the "ipconfig /flushdns" command to ensure that the computer obtains the correct DNS information for the telnet site.
Learn more about command here
https://brainly.com/question/30319932
#SPJ11
Bending radius in type AC shall be made not to be damaged and of the curve of the inner edge of any bend shall not be less than _________ times in diameter of the cable.
325.24
The bending radius in type AC cable should be made to prevent damage, and the curve of the inner edge of any bend should not be less than 5 times the diameter of the cable, as specified in the NEC section 320.24.
Pull the cord to unplug them from the outlet was one of the other answers to the question. Carry them by the cord, option C. D) Keep them close to outlets and on the prevent damage work table in a location that is simple to reach.
Read the manufacturer's directions for proper usage and maintenance of your tools to avoid harm.
These days, tools are pricey. Because of this, if you want to use them for a long time, you must take good care of them and use them appropriately. You must first study the manufacturer's instructions for the use and upkeep of the tool because of its complexity. By doing so, you'll make the most of their potential and employ them more effectively for the right tasks.
Learn more about prevent damage here
https://brainly.com/question/11156977
#SPJ11
Junction boxes shall be installed so that the wiring is _________ without removing any part of the building.
314.72(d)
Junction boxes shall be installed so that the wiring is accessible without removing any part of the building, meaning that the junction boxes can be reached and serviced without the need for demolition or major renovation work.
Roll-based access control is a method of restricting accessible to the network and to data based on an employee's position within a department. In this manner, access permissions are given in accordance with the roles given to employees. Employees with access privileges under this sort of access control are only permitted to access the folders and data files they require to do their tasks; otherwise, they are not permitted to access any data or information. This lowers the possibility of data breaches and aids the department in protecting sensitive data files and information.
Learn more about accessible here
https://brainly.com/question/17311592
#SPJ11
For a dwellign unit, the minimum size aluminum service entrance conductor permitted for a 100 amps service number zero _________ awg
310.15(b)(7)
For a dwelling unit, the minimum size aluminum service entrance conductor permitted for a 100-amp service is No. 1/0 AWG.
The table provides the minimum allowable ampacity for conductors of various materials and sizes. For a 100-amp service, the minimum allowable ampacity is 100 amperes, and the minimum conductor size for aluminum conductors is No. 1/0 AWG. It is important to note that the size of the service entrance conductor may also be influenced by factors such as the length of the run, voltage drop, and ambient temperature, among others. These factors may require a larger conductor size than the minimum required by the NEC to ensure safe and efficient operation of the electrical system.
Learn more about 100-amp service here:
https://brainly.com/question/27380344
#SPJ11
In the new service or product development​ process, the design stage is critical because it
In the new service or product development process, the design stage is critical because it establishes the blueprint for the entire service or product, ensuring its functionality, appeal, and efficiency. This stage involves refining ideas, conducting research, and developing prototypes, ultimately setting the foundation for successful development and launch of the service or product.
In the new service or product development process, the design stage is critical because it lays the foundation for the entire project. This is where the team determines the overall look and feel of the service or product and ensures it aligns with the company's brand and mission. The design stage also involves making important decisions about the functionality and usability of the service or product. If any flaws or issues are identified at this stage, they can be addressed before moving forward with development. Therefore, the design stage is essential to the success of the overall service or product development process.
Learn more about aligns here-
https://brainly.com/question/14396315
#SPJ11
the class shirt extends the clothing class. to make the class dressshirt inherit the functionality of both clothing and shirt its class header would be:
Group of answer choices
public class DressShirt inherits Shirt, Clothing
public class DressShirt inherits Shirt
public class DressShirt extends Shirt
public class DressShirt extends Shirt, Clothing
If Shirt inherits Clothing, then Shirt has direct access to the ______ members of Clothing
Group of answer choices
public and protected
public
private
protected
private and protected
Shirt inherits Clothing. What is the first thing that must happen in the Shirt constructor?
Group of answer choices
Initialize the required Shirt fields
Call the Clothing constructor
Create all objects required for Shirt fields
Map the parameters coming into the constructor to Shirt fields
The correct answer for the first question is: public class DressShirt extends Shirt, Clothing. The correct answer for the second question is: protected members of Clothing.
The correct answer for the third question is: Call the Clothing constructor. To make the class DressShirt inherit the functionality of both Clothing and Shirt, its class header would bethe class shirt extends the clothing class. to make the class dress shirt inherit the functionality of both clothing and shirt its class header would be.
public class DressShirt inherits Shirt, Clothing public class DressShirt inherits Shirt public class DressShirt extends Shirtpublic class DressShirt extends Shirt, Clothing. Your answer: public class DressShirt extends Shirt If Shirt inherits Clothing, then Shirt has direct access to the members of Clothing, Your answer: Call the Clothing constructor.
To know more about DressShirt:- https://brainly.com/question/31491617
#SPJ11
The correct answer to the first question is: public class DressShirt extends Shirt, Clothing constructor.
The correct answer to the second question is: public and protected.
The correct answer to the third question is: Call the Clothing constructor.
Learn more about Clothing constructor: https://brainly.com/question/13267121
#SPJ11
Lock and key control procedures should include a key register and an authorized user list. True or False?
True. Lock and key control procedures should include a key register and an authorized user list, is true statement.
Lock and key control procedures typically require a key register to track the movement of keys and an authorized user list to ensure that only authorized personnel have access to the keys. The key register documents who has signed out which key and when, while the authorized user list specifies who is permitted to use the keys. These procedures help prevent unauthorized access to sensitive areas or assets and maintain accountability for key usage. By implementing these measures, organizations can improve their security posture and mitigate the risk of theft, loss, or misuse of keys.
learn more about authorized here:
https://brainly.com/question/14896494
#SPJ11
To be classified or maintained as classified, information must meet all of the following criteria except:
The unauthorized disclosure of the information could reasonably be expected to cause damage to the national security.
To be classified or maintained as classified, information must meet all of the following criteria:
It must be owned by, produced by, or under the control of the U.S. government.
It must be determined to require protection against unauthorized disclosure based on the potential damage to national security that could result from such disclosure.
It must be designated as classified by an authorized original classification authority.
It must be marked as classified.
Failure to meet any of these criteria could result in the compromise of classified information, which could have serious consequences for national security.
It is essential that all individuals who have access to classified information understand and adhere to these criteria to prevent unauthorized disclosure and protect sensitive information.
The criteria must be met to classify or maintain information as classified.
There is no exception to these criteria.
These criteria are essential to maintaining the security and integrity of classified information and ensuring that it is only accessible to authorized personnel with the appropriate clearance levels.
For similar questions on information
https://brainly.com/question/30456421
#SPJ11
While paving an unsupported edge the edge can no deviate more than how far from the string line?
The edge cannot deviate more than 3/8 inch from the string line when paving an unsupported edge.
When paving an unsupported edge, which is a pavement edge devoid of any support or obstruction, care must be taken to prevent excessive deviation from the ideal location. An unsupported edge can normally deviate from the string line by no more than 3/8 inch. This is so that a larger deviation won't impair the pavement's edge integrity and cause early pavement breakdown. String lines, straightedges, and laser-guided devices are just a few of the instruments and methods that may be utilised to make sure the pavement edge stays within the allowable variation. The lifetime and durability of the pavement depend on proper attention being paid to the edge deviation requirements throughout the paving process.
learn more about string line here:
https://brainly.com/question/31230554
#SPJ11
What is the difference between Superpave mixes and Friction Course mixes?
While Friction Course mixes are made to produce a lot of friction to increase skid resistance, Superpave mixes are made to withstand high traffic and harsh weather conditions.
The performance-based method used in the design of superpave mixtures takes into account the predicted traffic, climate, and material qualities. They can be tailored to fulfil particular performance needs and are frequently utilised in high-traffic locations. Superpave mixes offer superior durability and fracture resistance because they contain more asphalt and larger aggregate sizes than traditional mixes.
On the other hand, friction course mixes are made to offer a lot of friction to increase skid resistance, especially on motorways and other high-speed roads. To improve the surface smoothness and traction, they employ smaller aggregate size and a modified asphalt binder. As the top layer of the pavement, friction course mixes are frequently utilised to promote safety and lower the likelihood of accidents brought on by skidding.
learn more about friction course here:
https://brainly.com/question/30830010
#SPJ11
A network technician is investigating network connectivity from a PC to a remote host with the address 10.1.1.5. Which command issued on the PC will return to the technician the complete path to the remote host?
To investigate network connectivity from a PC to a remote host with the address 10.1.1.5, the network technician should use the `tracert` command (on Windows) or `traceroute` command (on Linux and macOS).
This command will return the complete path to the remote host by displaying all intermediate hops between the PC and the remote host. The command that the network technician can use to trace the complete path to the remote host with the IP address 10.1.1.5 from the PC is "tracert 10.1.1.5". This command will provide a detailed report of the network route taken by the packets to reach the destination, including each hop, the time taken to reach each hop, and the IP address of each device on the way to the remote host.
Learn More about Linux here :-
https://brainly.com/question/30176895
#SPJ11
Every PLC model offers some form of counter instruction. true/false
True. all PLC models offer some form of counter instruction as it is an essential tool for automation and control.
How to determine PLC models?Programmable Logic Controllers (PLCs) are designed to perform automation tasks and they often need to keep track of various events and processes occurring in a system.
Counters are one of the essential instructions that are used in PLC programming to keep track of such events.
Counters are used to count pulses, events, or other actions, and they are available in various types and forms in different PLC models.
Most PLC models offer some form of counter instruction as it is a fundamental feature in PLC programming.
The counter instruction is used to increment or decrement a counter value based on a specified condition or input signal.
It is an important tool for controlling the flow of the program, and it can be used for a wide range of applications such as counting parts, tracking the number of times a machine has cycled, or monitoring the production rate of a system.
Therefore, it can be concluded that almost all PLC models offer some form of counter instruction as it is an essential tool for automation and control.
Learn more about PLC models
brainly.com/question/30469449
#SPJ11
How many bits make up the single IPv6 hextet :10CD:
A single IPv6 hextet is made up of 16 bits. In the hextext 10CD, the first two digits (10) represent 8 bits (4 bits each), and the last two digits (CD) represent another 8 bits (4 bits each), making a total of 16 bits.
To determine the number of bits in a single IPv6 hextet like "10CD", follow these steps:
1. Understand that an IPv6 hextet consists of 4 hexadecimal digits.
2. Recall that each hexadecimal digit is represented by 4 bits.
3. Multiply the number of hexadecimal digits (4) by the number of bits per digit (4).
Calculation: 4 (hexadecimal digits) * 4 (bits per digit) = 16 bits
So, the single IPv6 hextet "10CD" is made up of 16 bits.
Learn more about digits at : brainly.com/question/30142622
#SPJ11
The overhead service conductors from the last pole or other aerial support to and including the splices, if any, connection to the service-entrance conductors at the building or other structure.
10 def.
The overhead service conductors refer to the wires that are responsible for carrying electrical power from the last pole or aerial support to the building or other structure. These conductors include all the components, including any splices that are used to connect the service-entrance conductors at the building or other structure.
Overall, the structure of these service conductors is an essential aspect of ensuring that electrical service is safely and reliably delivered to homes and businesses.
Overhead support The conductors are those that run from the service point to the building's or other structure's first point of connection to the service-entrance conductors.
A substance or material that allows the passage of power is known as an electric conductor. When voltage is applied, electric charge carriers—typically electrons or ions—move without difficulty from one atom to the next in a conductor.
Conductors are the substances or materials that let energy pass through them. Additionally, conductors allow heat to pass through them. Metals, the human body, the Earth, and animals are some examples of conductors. The body is a powerful conductor.
Learn more about service conductors here
https://brainly.com/question/28298618
#SPJ11
Each of the following class declarations has errors. Locate as many as you can. 63. class Yard { private: float length; public: yard(float l) { length = l; } // float conversion function void operator float() { return length; } ... Other member functions follow ...};
The errors in the given class declaration. Here are the issues : 1. The constructor has a typo in its name. It should be "Yard" instead of "yard" to match the class name, 2. The function signature for the conversion operator should be "operator float()" instead of "void operator float()". The return type should be float, not void.
Here's the corrected version of the class declaration:
```cpp
class Yard {
private:
float length;
public:
Yard(float l) { length = l; } // corrected constructor name
// corrected return type for conversion function
operator float() { return length; }
// ... Other member functions follow ...
};
```
To learn more about Class declaration Here:
https://brainly.com/question/30700632
#SPJ11
To what legacy address class does the address 10.0.0.0 belong?
The address 10.0.0.0 belongs to the Class A address range, which is a legacy address class. Class A addresses are defined by having the first octet in the range of 1 to 126, and the remaining three octets being available for host addressing.
The address 10.0.0.0 is a private IP address that belongs to the Class A range of IP addresses. It is often used as the default address for many routers and network devices, and is commonly used in private networks that do not require direct connectivity to the Internet. The address range from 10.0.0.0 to 10.255.255.255 is reserved for private networks and is not routable on the Internet. This allows organizations to use these addresses for internal communication without requiring unique public IP addresses for every device. The use of private IP addresses helps to conserve public IP address space and improves network security by limiting direct access to internal resources from the Internet.
Learn more about address 10.0.0.0 here:
https://brainly.com/question/13783710
#SPJ11
CCTV systems consist of sensors, control units, transmission lines, and monitor units. True or False?
True, CCTV systems consist of sensors, control units, transmission lines, and monitor units. These components work together to capture, transmit, and display video footage for security purposes.
The sensors are the cameras that capture video footage of the area under surveillance. The control units are responsible for processing and managing the video data collected by the sensors. The transmission lines are used to transmit the video data from the sensors to the control units. Finally, the monitor units display the video data in real-time, allowing operators to monitor the area under surveillance. Overall, these components work together to provide an effective means of surveillance and security monitoring for a wide range of applications, from public spaces and commercial premises to private homes and residential communities.
Learn more about CCTV here-
https://brainly.com/question/26407408
#SPJ11
Static member variables are declared inside the class declaration. Where are static member variables defined?
Answer:
Static member variables are defined outside the class declaration, usually in the global scope or in a namespace, using the scope resolution operator (::) to specify the class to which the variable belongs. This is because static member variables are shared among all instances of the class and must have a single definition in the program.
Explanation:
Static member variables are declared inside the class declaration, and they are defined outside the class declaration in the source code file.
Here's a step-by-step explanation:
1. Declare the static member variable within the class declaration using the 'static' keyword.
2. Define the static member variable outside the class declaration in the source code file, specifying the variable type and providing an initial value if needed.
By following these steps, you ensure that the static member variable is correctly declared and defined in your code.
Learn more on Static Member Variables here : https:brainly.in/question/54622555
#SPJ11
Question 43
After the servicing (pumping) of a septic tank, it is essential that the tank and lid be
a. Cleaned with a bleach or chlorine product
b. Scrubbed to remove hardened sludge
c. Recolonized with a commercial biological product containing yeast
d. Replaced and secured for safety purposes
After the servicing (pumping) of a septic tank, it is essential that the tank and lid be:
d. Replaced and secured for safety purposes
After the servicing (pumping) of a septic tank, it is essential that the tank and lid be replaced and secured for safety purposes. It is important to make sure that the tank and lid are properly fitted and secure to prevent any accidents or potential hazards. Cleaning the tank with a bleach or chlorine product or scrubbing it to remove hardened sludge may not be necessary but can be done as a precautionary measure. However, recolonizing the tank with a commercial biological product containing yeast may be beneficial in promoting the growth of healthy bacteria in the tank to aid in the decomposition of waste.It is not possible to measure the effects of human casualties. They can have grave consequences for employees and their families and friends as well.
This is why workplace safety and health measures are necessary. They are essential for the well-being of employers and employees alike. The feeling of assurance that one has, knowing that he will return safely from work, is more significant than anything else.
learn more about safety purposes here:
https://brainly.com/question/17309155
#SPJ11
This facility access control procedure focuses on the unauthorized removal of government assets from an area; thus, it serves not only as a deterrent, but also as a means for detecting contraband: That is the part of:
This facility's access control procedure is designed to prevent unauthorized individuals from removing government assets from the area.
This procedure acts as both a deterrent and a detection method for contraband. The facility access control procedure you described, which focuses on preventing the unauthorized removal of government assets.
And serves as both a deterrent and a means for detecting contraband, is part of a comprehensive security plan or policy.
Learn more about government click here:
brainly.com/question/9201836
#SPJ11
Vaults have reinforced concrete walls, ceilings, and floors, and have a hardened steel door:
The use of reinforced concrete walls, ceilings, and floors in vaults is intended to provide extra strength and durability.
This construction method involves adding additional steel bars or mesh to the concrete mix to improve its tensile strength, which makes it more resistant to cracking and breaking under pressure. Similarly, the hardened steel door is designed to withstand significant force or impact, making it virtually impenetrable. Overall, the combination of reinforced concrete and hardened steel makes vaults extremely secure and difficult to breach.
To learn more about vaults click the link below:
brainly.com/question/26255180
#SPJ11
Where the number or current- carrying conductors in a raceway or cable, when it exceeds the allowable ampacity of each conductor it shall be ________.
310.15(b)(3)
Where the number or current-carrying conductors in a raceway or cable, when it exceeds the allowable ampacity of each conductor it shall be derated. This is stated in section 310.15(b)(3) of the National Electrical Code (NEC).
Current-carrying conductor: a conductor which carries the electric current under normal conditions [this term is defined in the IEC TS 62257-5-2015].Current-carrying conductor: a conductor which carries the electric current under normal conditions [this term is defined in the IEC TS 62257-5-2015].
Note 1 to entry: The line conductor (L), the neutral conductor (N), the mid conductor (M), the PEN conductor, the PEM conductor and the PEL conductor are the current-carrying conductors. The protective conductor (PE) is not the current-carrying conductor.
A protective conductor under normal conditions conducts almost no electric current, because there are no faults and no induced currents, such as earth fault currents. Therefore, it is not considered a current-carrying conductor and is not included in the total number of conductors in electrical circuits, networks and systems.
learn more about raceway here:
https://brainly.com/question/30821238
#SPJ11
T/F: "Contained in" applies when a properly marked source document contains classified information that has been extracted word-for-work and placed into the new document.
The given statement " Contained in applies when a properly marked source document contains classified information that has been extracted word-for-word and placed into the new document." is true because this means that the new document should also be marked with the appropriate classification markings to indicate the level of sensitivity of the information contained within it.
In this context, the "Contained in" marking indicates that the classified information in the new document originated from the source document, and that the source document is the controlling classification authority for that information. The new document may contain additional information that is not classified or may have a different overall classification level than the source document.
Learn more about classified information: https://brainly.com/question/30625702
#SPJ11
What does the Total Coliform Rule require in response to a positive sample for Total Coliforms?
a) Immediate Public Notification
b) Issuance of Boil Water notices
c) Repeat Sampling
d) Distribution system flushing
c) Repeat Sampling, The Total Coliform Rule requires that if a sample taken from a public water system tests positive for Total Coliforms, the system must take immediate corrective action.
which includes repeating the sampling process to confirm the results and to identify the source of contamination. The system must also assess the problem and take necessary steps to eliminate the contamination and prevent it from recurring. Immediate public notification and issuance of boil water notices may also be necessary depending on the severity of the contamination. Distribution system flushing may also be required as part of the corrective action. Coliforms are a group of bacteria commonly found in the environment and in the gastrointestinal tracts of humans and animals. They are indicators of fecal contamination and are used as a measure of water quality and safety. Coliforms can cause illness in humans, especially those with weakened immune systems, and their presence in drinking water is a sign of possible contamination with harmful pathogens. Coliforms are classified into two groups: total coliforms and fecal coliforms. Fecal coliforms are a subset of total coliforms and are found only in the feces of warm-blooded animals.
Learn more about Coliforms here:
https://brainly.com/question/14353378
#SPJ11
Why do threads context switch only 5x faster than processes? (not 30x like process creation?)
Threads context switch only 5x faster than processes because threads still require their own unique program counters and registers, just like processes. The difference is that threads share the same address space and resources with other threads within the same process, making context switching faster than with processes.
However, there is still a significant overhead involved in context switching threads due to the need to save and restore thread-specific data. Additionally, the speed of process creation is not directly related to the speed of context switching, as the former involves creating a new process from scratch with its own memory space and resources, while the latter involves switching between already-existing threads or processes.Threads context switch only 5x faster than processes because threads share the same memory space and resources with the parent process, while processes have separate memory spaces. This means that during a context switch for threads, there is less overhead and a smaller amount of data to save and restore, making the process quicker compared to context switching between separate processes. The 30x speed difference you mentioned is related to process creation, which involves a more complex procedure of allocating memory and resources compared to thread creation.
Learn more about significant here
https://brainly.in/question/11406120
#SPJ11
(358-26) A run of electrical metallic tubing between outlet boxes shall not exceed _____ close to the box.
The National Electric Code (NEC) states that a run of electrical metallic tubing between outlet boxes shall not exceed 3 feet close to the box.
This is to ensure safe and efficient electrical wiring installation. It is important to follow these guidelines to prevent electrical hazards and ensure compliance with local building codes. If too many wires are installed in a conduit, the conduit can become overheated, which could create a fire hazard. The maximum length limit helps ensure that there is adequate space in the conduit for the wires, which in turn helps prevent overheating.It's worth noting that the maximum wire fill rule for EMT conduit is not the only requirement for conduit installations in the NEC. Other requirements include rules for minimum conduit size, maximum conduit fill, and proper installation techniques to ensure the conduit is securely fastened and protected from damage. These requirements are all aimed at ensuring the safety and reliability of electrical wiring installations.
Learn more about electrical here
https://brainly.in/question/47308007
#SPJ11
Scientists have detected thousands of gamma ray bursts. The evidence suggests that most or all of these bursts _________.
Scientists have detected thousands of gamma ray bursts. The evidence suggests that most or all of these bursts are caused by the collapse of massive stars and the subsequent explosion of their cores. This content loaded discovery has helped scientists better understand the processes that occur during supernovae and the release of high-energy radiation.
An explosive eruption is the worst volcanic eruption. This eruption occurs when thick magma is mixed with gas under the ground so that it will foam when it is ejected and cause volcanic ash when an eruption occurs. The possibility of an eruption becomes more violent when there is a blockage in the magma channel. Composite volcanoes tend to occur as a result of explosive eruptions, namely when magma pressure increases to come out to the earth's surface accompanied by gas pressure which further increases the eruption. The eruptions that occur in these composite volcanoes can become violent eruptions that affect a wider area.
Learn more about subsequent explosion here
https://brainly.com/question/29525420
#SPJ11
The instantaneous contacts of a timer have no time-delay period associated with them. true/false
The given statement "the instantaneous contacts of a timer do not have a time-delay period associated with them" is TRUE because they make or break the circuit as soon as the timer reaches a certain point in time.
What's instantaneous contacts?Instantaneous contacts are designed to change their state immediately when the timer coil is energized or de-energized, providing a direct and immediate response to the control signal.
In contrast, time-delay contacts are specifically designed to introduce a delay between the activation or deactivation of the timer coil and the change in state of the contacts, providing a controlled and adjustable time interval for specific applications.
In summary, instantaneous contacts offer a quick response with no time-delay, while time-delay contacts are used for applications requiring a specific time period before changing their state.
Learn more about time delay at
https://brainly.com/question/28319426
#SPJ11
8. A system has defined specifications that describe how signals are sent over connections which layer of the transmission control protocol internet protocol TCP IP model provides these functions?A. TransportB. NetworkC. Data linkD. Physical
The layer of the TCP/IP model that provides the function of defining specifications for how signals are sent over connections is the A) Transport layer.
The Transport layer is a layer in the TCP/IP model that provides end-to-end communication between devices over a network. It is responsible for ensuring reliable and orderly delivery of data across the network by establishing and managing connections between devices.
One of the key functions of the Transport layer is to define specifications for how signals are sent over connections. Specifically, it determines the type of service required for a given data transfer, such as the reliability and speed of delivery, and how the data should be divided into smaller units, known as segments or packets.
So the correct answer is A.Transport.
Learn more about TCP/IP: https://brainly.com/question/14280351
#SPJ11
Friction course has what PG binders in its makeup?
"Friction course typically uses PG 64-22 or PG 70-22 binders in its makeup to provide high skid resistance and improved durability."
A friction course, also known as a high friction surface treatment, is a type of pavement surface treatment used to improve the skid resistance of roadways, particularly in wet or slippery conditions. The friction course is composed of a layer of high-quality aggregates, typically granite or quartz, and a polymer-modified asphalt binder that provides excellent adhesion and durability. The polymer-modified binder used in the friction course is often a Performance Grade (PG) binder, which is selected based on its high-temperature performance and resistance to rutting and cracking. PG 64-22 and PG 70-22 binders are commonly used in friction courses due to their high-temperature viscosity, which helps to maintain aggregate embedment and prevent stripping, as well as their low-temperature stiffness, which provides excellent skid resistance in cold weather conditions.
Learn more about friction course here:
https://brainly.com/question/13684931
#SPJ11
(590-4(C)) Type NM and NMC cables can be used for temporary wiring in structures of a height of 6 feet, 12 feet, or 18 feet.(True/False)
The answer is False.
According to the National Electric Code (NEC), Type NM and NMC cables are only suitable for use in residential buildings and are not permitted for use in commercial and industrial buildings. Additionally, these cables are not designed for use in temporary installations and are only permitted for permanent installations.
The height of the structure mentioned in the statement (6 feet, 12 feet, or 18 feet) is not relevant to the usage of NM and NMC cables, as these types of cables are designed for permanent wiring in buildings, not for temporary applications. It is crucial to follow the National Electrical Code (NEC) guidelines and other local regulations when using these cables for wiring purposes.
In summary, the statement is false because NM and NMC cables are not intended for temporary wiring and the height of the structure is not relevant to their usage. Remember to always follow electrical codes and safety guidelines when working with wiring and electrical systems.
Learn more National Electric Code here: brainly.com/question/17215290
#SPJ11