The standard enthalpy change for the reaction at 25 °C is -102.3 kJ/mol.
To calculate the standard enthalpy change for the given reaction at 25 °C,
The first step is to decompose magnesium hydroxide into magnesium oxide and water:
Mg(OH)2(s) → MgO(s) + H2O(l) ΔH1
The second step is to dissolve magnesium oxide in hydrochloric acid to form magnesium chloride and water:
MgO(s) + 2 HCl(g) → MgCl2(s) + H2O(l) ΔH2
Finally, we can cancel out the common species H2O(l) from both equations and combine the two equations to get the overall reaction:
Mg(OH)2(s) + 2 HCl(g) → MgCl2(s) + 2 H2O(g) ΔH = ΔH1 + ΔH2
The standard enthalpy change for the first reaction (ΔH1) is -37.1 kJ/mol, and for the second reaction (ΔH2) is -65.2 kJ/mol. Therefore, the standard enthalpy change for the overall reaction is:
ΔH = ΔH1 + ΔH2 = (-37.1 kJ/mol) + (-65.2 kJ/mol) = -102.3 kJ/mol
Enthalpy is a thermodynamic property that describes the total energy of a system, including its internal energy, pressure, volume, and other factors. It is often denoted by the letter H and is defined as the sum of a system's internal energy and the product of its pressure and volume.
Enthalpy is a useful property because it provides a way to measure the heat flow into or out of a system at constant pressure. This is because the change in enthalpy during a process is equal to the heat absorbed or released by the system at constant pressure.
Enthalpy is commonly used in chemical thermodynamics to describe the heat changes that occur during chemical reactions. The enthalpy change for a reaction is often referred to as the heat of the reaction and is denoted by ΔH. Positive values of ΔH indicate that a reaction is endothermic, meaning it absorbs heat, while negative values indicate an exothermic reaction that releases heat.
To learn more about Enthalpy visit here:
brainly.com/question/13996238
#SPJ4
the quantity with the same units as force times time, ft, with dimensions mlt−1 is what?
The quantity with the same units as force times time (ft) and dimensions of MLT^(-1) is momentum.
Momentum is defined as the product of an object's mass and its velocity. Its units in the SI system are kilogram meters per second (kg m/s).
To see why momentum has the same units as force times time, we can use the definition of force, which is the rate of change of momentum.
F = dp/dt
where F is force, p is momentum, and t is time. Rearranging this equation, we get:
F * t = dp
where F * t is force times time (ft) and dp is the change in momentum. Therefore, force times time has the same units as momentum, which is MLT^(-1).
To learn more about Momentum :
https://brainly.com/question/4956182
#SPJ4
Light is made of discrete packets of energy called_________
Answer:
Photons.
Explanation:
the ocean ridge system is divided into segments that are separated by transform ______
The ocean ridge system is divided into segments that are separated by transform faults and fracture zones.
Transform faults are areas where two tectonic plates slide past one another horizontally, as opposed to fracture zones, which are regions where the crust is broken but there is little to no movement between the plates. The various parts of the ocean ridge system are divided by transform faults or fracture zones. These fracture zones and transform faults have the ability to lateral move the mid-ocean ridge in relation to one another. The segments of the ridge system, which are frequently parallel to one another, are divided by these transform faults or fracture zones, which can give the mid-ocean ridge system a zigzag appearance on a map.
To know more about ocean ridge, visit,
brainly.com/question/7666628
#SPJ4
A 24n force causes a 2.0 kg mass to accelerate at 8.0m s^(-2) along a horizontal surface. the coefficient of dynamic friction is
Answer:
Explanation:
Let [tex]F_{R}[/tex] be the frictional force.
[tex]F_{net} = F_{applied}-F_{R}[/tex]
2*8=24-[tex]F_{R}[/tex]
[tex]F_{R}=24-16=8N[/tex]
[tex]F_{g}=mg = 2*10 = 20N[/tex]
Coefficient of friction = [tex]\frac{F_{R}}{F_{g}}[/tex]
=8/20=2/5=0.4
The coefficient of friction = 0.4
the electron transport chain is considered an aerobic pathway, meaning it requires ____________.
The electron transport chain is considered an aerobic pathway, meaning it requires Oxygen.
Electron transport chain:
The electron transport chain (ETC) is a series of protein complexes and other molecules that transfer electrons from electron donors to electron acceptors through redox reactions (reduction and oxidation produce simultaneously) and relate this transfer of electrons to the transfer combinations of protons (H + ions) on the 'membrane. Electron transfer from NADH and FADH2 to ETC involves 4 multi-subunit maxizyme complexes and 2 mobile electron carriers. Many electron transport chain enzymes are membrane bound.
The flow of electrons through the electron transport chain is a process of releasing energy. The energy of the redox reactions creates an electrochemical gradient of protons which drives the synthesis of adenosine triphosphate (ATP). In aerobic respiration, the flow of electrons ends with molecular oxygen as the final electron acceptor. In anaerobic respiration, other electron acceptors such as sulfate are used.
Oxygen is the terminal electron acceptor in the mitochondrial electron transport chain and is therefore required for energy generation through oxidative phosphorylation. In environments where oxygen levels are reduced (hypoxia), organisms develop an adaptive response by activating hypoxia-inducible transcription factors (HIFs) to maintain their energy needs. To sense hypoxic environments, cells have evolved oxygen-sensing mechanisms that activate HIF. The oxygen sensing pathway requires the mitochondrial electron transport chain. This chapter describes the methods used to study the electron transport chain and the role of reactive oxygen species, by-products of electron transport, in oxygen sensing.
Learn more about Oxygen:
https://brainly.com/question/13370320
#SPJ4
Based on the kinetic theory of matter, which statement is incorrect?
At temperatures above absolute zero, all matter has energy and the particles are
moving.
Solids have a fixed shape and volume. The particles of a solid do not move.
Liquids have a variable shape and fixed volume. The particles of a liquid slide
past each other.
Gases have a variable shape and volume. The particles of gases move quickly.
Answer:
Explanation: B. because particles of solid move. Though particles of solid are packed together tightly they vibrate and vibration is a form of motion .
Alfredo leaves camp and, using a compass, walks 4 km E, then 6 km S, 3 km E, 5 km N, 10 km W, 8 km N, and, finally, 3 km S. At the end of three days, he is lost. By drawing a diagram, compute how far Alfredo is from camp and which direction he should take to get back to camp.
5 kilometres separates the hiker or Alfredo from the camp, and he will proceed either north or south.
What is hiker?A long, strenuous walk known as hiking is typically done on footpaths or trails in rural areas. During the seventeenth century, the practise of leisure walking spread throughout Europe. Religious pilgrimages have been practised for much longer, although they often include extensive walking for a particular religion's spiritual goal.
hiking in the direction of the arrow here, heading east total Ab plus CD equals 7 kilometres
but he headed back west 10 kilometres EF
As a result, he is located 3 kilometres (3 km) west of point A.
and he travels 9 km on the south side, totaling BC + GH.
He moves towards the north side, where DE + FG = 13 kilometres
Effective distance from A point is 13 - 9 km (4 km north of A).
so
We use the Pythagorean Theorem to calculate the distance from A to H.|
the triangle AOH
AO² + HO² = AH²..........
place value here.
3² + 4² = AH²
AH² = 9 + 16
AH² = 25
AH = [tex]\sqrt{25\\[/tex]
AH = 5
To learn more about hiker
https://brainly.com/question/13490726
#SPJ1
mechanics is not an abstract or even an applied science; it is a pure science. (true or false)
It is False to say that mechanics is a pure science and not an abstract or even an applied one.
Physics' branch of mechanics is concerned with the investigation of motion and the conduct of physical systems when subjected to external forces. It is typically regarded as a subset of applied physics since its concepts are frequently employed to resolve issues in the real world, such as the creation of buildings, machinery, and vehicles.
Nonetheless, because it aims to comprehend the underlying ideas that guide the behaviour of physical systems, mechanics can also be regarded as a pure science. For instance, modern mechanics is largely based on the principles of motion discovered by Isaac Newton in the 17th century.
To learn more about Mechanics :
https://brainly.com/question/29633640
#SPJ4
What is the conversion of 210 c to f ?
The conversion from 210 Celsius to Fahrenheit is 410 degrees Fahrenheit. To convert Celsius to Fahrenheit, you can use the formula (Celsius x 9/5) + 32 = Fahrenheit.
The equation F = 9/5C + 32 relates temperature measured in degrees Celsius (C) to degrees Fahrenheit (F). The formula is used to convert temperatures from Celsius to Fahrenheit , and vice versa. To use the formula, you simply plug in the known temperature in Celsius (or Fahrenheit), and then solve for the unknown temperature in Fahrenheit (or Celsius).
To convert Celsius to Fahrenheit, you would use the formula F = 9/5C + 32, where C is the temperature in Celsius and F is the temperature in Fahrenheit. Thus, 210 Celsius to Fahrenheit is 410 degrees Fahrenheit.
To know more about celsius please refer:
https://brainly.com/question/14767047
#SPJ4
how long can ready-mix concrete remain in the mixer and still be used? A. As soon as possible B. Under one hour C. Over one hour
Ready-mix concrete can typically remain in the mixer for up to two hours before it starts to set and harden, making it difficult or impossible to use. Correct choice is option c.
The setting and hardening of concrete is a chemical process that occurs when water is added to the dry mix of cement, sand, and aggregates. Once the mixing process starts, a chemical reaction begins that produces heat, causing the concrete to start setting and hardening.
In general, ready-mix concrete should be used as soon as possible after mixing to ensure that it retains its workability and strength. If the concrete remains in the mixer for too long, it may start to set and harden, making it difficult or impossible to use. Option c is correct answer.
To know more about the concrete, here
brainly.com/question/28903866
#SPJ4
What is mechanical advantage of a simple machine?
For analyzing the forces in simple machines like levers and pulleys, mechanical advantage—a measure of the ratio of output force to input force in a system—is utilized.
The force that is amplified or increased by using the simple tools in the simple machine is known as the mechanical advantage of the simple machine. To achieve the desired output force amplification, the gadget trades off input forces against movement.
In ideal systems, also known as 100% efficient systems, where there are no energy losses between the input and output times, the mechanical advantage is typically represented in ideal terms.
To know more about mechanical advantage, visit,
https://brainly.com/question/18345299#:~:text=Expert%2DVerified%20Answer&text=The%20power%20multiplication%20obtained%20by,referred%20to%20as%20mechanical%20advantage.
#SPJ4
can squirrels survive terminal velocity
It is highly unlikely that a squirrel could survive a fall from terminal velocity.
Terminal velocity is the maximum speed an object can achieve when falling through the air due to the balance between gravity and air resistance. For a typical squirrel, this would be around 60 to 100 miles per hour, depending on its size and mass.
Although squirrels are known for their agility and ability to survive falls from trees, a fall from terminal velocity would likely be fatal. At such high speeds, the impact on the squirrel's body upon hitting the ground would be immense and would almost certainly result in death or serious injury. Squirrels have adaptations that allow them to survive falls from trees, such as their ability to twist and turn their bodies to minimize the impact, but these adaptations would not be sufficient to survive a fall from terminal velocity.
Learn more about terminal velocity:
brainly.com/question/2654450
#SPJ4
A 2-kg mass placed 30-cm to the
left of the fulcrum is balanced by
a 1-kg mass placed ______ cm to
the right of the fulcrum
Answer:
60 cm
Explanation:
Torque = τ = rFsinΘ
In this case Θ = 90, so sinΘ = 1
x = distance from fulcrum of the 1 kg mass
(2 kg)(g)(0.30 m) = (1 kg)(g)(x) because the beam is in equilibrium
0.60 N·m = (1 N)x
x = 0.60 m = 60 cm
which objective lens requires oil to be applied
An oil immersion objective lens requires oil to be applied in order to increase the resolving power of the microscope.
This type of objective lens is specially designed to be used with oil in order to observe individual bacteria strands or other very small objects. The most common oil immersion objective lens is the 100x lens, which is used as a gold standard for observing blood smears [3]. Special oils are required so as to prevent damage to the lens and to ensure optimal resolution.
To know more about resolving power please refer:
https://brainly.com/question/30628482
#SPJ4
How to convert 98.9 f to c?
98.9°F is equivalent to 37.17°C temperature. Using Formula: °C = (°F - 32) x 5/9
To convert 98.9°F to Celsius (°C), you can use the following formula:
°C = (°F - 32) x 5/9
Substituting 98.9 for °F in the formula, we get:
°C = (98.9 - 32) x 5/9 = 37.17
Therefore, 98.9°F is equivalent to 37.17°C.
It's important to note that when converting Fahrenheit to Celsius, the resulting Celsius temperature is often more precise with decimal places. In this case, the Celsius temperature is 37.17°C, which means that the temperature is between 37°C and 38°C.
To double-check your conversion, you can also use online temperature conversion tools or smartphone apps that are readily available and accurate.
Learn more about temperature:
brainly.com/question/15267055
#SPJ4
A weather report states that there is a 20 mph north wind. Would a flag wave toward the north or toward the south?
A north wind blows from the north and blows towards the south. Therefore, the flag would wave towards the south.
What is wind?The uneven heating of the Earth by the sun and the rotation of the Earth result in the wind, which is the movement of air. Light breezes to natural disasters like hurricanes and tornadoes are all types of winds.
Planetary, Trade, Westerly, Periodic, and Local Winds are some examples of wind types. Wind exists due to the uneven heating of the earth.
A north wind blows from the north and blows towards the south. Therefore, the flag would wave towards the south.
Learn more about the wind, here:
https://brainly.com/question/12005342
#SPJ1
differentiate stability and balance the how it relates to motor development
Your capacity to manage your tissue without moving against gravity is referred to as balance. Your control over your body while moving is referred to as stability.
When it comes to body movements, balance entails the capacity to maintain the body's command while it is still, whilst stability refers to the capacity to maintain the body's grip while it is in motion. This is the primary distinction between equilibrium and stability.
The more stable our movement's foundation, the more we can govern the force throughout our own body. Balance refers to our ability to retain our center of mass within the boundaries of our support base whether static or dynamic.
It is in charge of keeping us erect whether we are waiting still or moving. A better sense of stability and balance does more than just keep you from falling in the future. Other immediate health benefits of maintaining your stability include improved mobility.
Learn more about balance and stability here:
https://brainly.com/question/1403056?referrer=searchResults
#SPJ4
50 POINTS!
Look at the HR diagram below with four stars labeled. The HR diagram is shown with absolute brightness on the vertical axis and surface temperature in degree Celsius on the horizontal axis. The dwarf stars are plotted along a slant from coordinates 30,000 and negative 3 to 10,000 and negative 4. The main sequence stars are plotted along a slant from coordinates 20,000 and negative 2 to 2,000 and negative 6. The giants are plotted horizontally from coordinates 5,000 and 2 to 2,000 and 3. The supergiants are plotted horizontally from coordinates 7,500 and 4 to 2,500 and 4. Four stars are plotted: A is at 20,000, negative 4, B is at 2,500, negative 4, C is at 5,000, 2, and D is at 6,000, 4. Which statement is correct about Star A and Star C? They have the same color because they are neighboring stars. They have the same brightness because they are neighboring stars. They have different colors because they have different temperatures. They have different brightness because they are the same size.
The correct statement is that "They have different colors because they have different temperatures."
What are supergiant stars?
The most massive and brightest stars are known as supergiants. Supergiant stars range in temperature from roughly 3,400 kelvin to over 20,000 kelvin, whereas their absolute visual magnitudes range from 3 to 8.
In light of this, we may say that supermassive stars are a particular form of a star with an absolute brightness of about 3 and a surface temperature of about 20,000 °C.
To know more about supergiants, visit:
brainly.com/question/25872293
#SPJ1
the peak wavelengths of stars, what are blackbody radiators, are determined by
The light's peak wavelength gets shorter as it emits more light. Black-body radiation is the thermal electromagnetic radiation that a black body emits when it is in thermodynamic equilibrium with its surroundings.
It possesses a distinct, continuous spectrum of wavelengths that are inversely correlated with intensity and solely dependent on the body's temperature, which is considered to be homogeneous and constant for the purposes of computations and theory.
A black body's intensity falls along with its temperature, and its peak shifts to longer wavelengths. The traditional Rayleigh-Jeans law and its ultraviolet catastrophe are displayed for comparison. If a hole is cut in the wall of a fully insulated container that is thermally equilibrated internally, the hole will still radiate black body radiation as long as it doesn't significantly affect the equilibrium.
Many common things will spontaneously release thermal radiation that can be roughly compared to black-body radiation.
To know more about wavelength
https://brainly.com/question/20038918
#SPJ4
what can the depth of the pe well tell you
The depth of a petroleum well can provide important information about the geological structure and potential oil reserves in a particular area.
The depth of the well is an indicator of the thickness of the rock formations that have been drilled through, which can help identify potential reservoirs of oil or gas. By analyzing the rock layers and their characteristics, such as porosity and permeability, geologists can estimate the quantity and quality of hydrocarbons present in the reservoir.
In addition to providing information about the potential oil and gas reserves, the depth of the well can also be used to determine the cost and feasibility of drilling in a particular area. Drilling deeper wells is typically more expensive, so understanding the geology and potential oil reserves at a particular depth is important for determining the economic viability of a drilling project.
Overall, the depth of a petroleum well is a key factor in understanding the geology and potential hydrocarbon resources in a particular area.
Learn more about reservoirs :
https://brainly.com/question/26888545
#SPJ4
At what frequency does ionizing
radiation begin in the electromagnetic
spectrum?
A. visible light
B. microwaves
C. ultraviolet light
D. radiowaves
4
Answer:
C. ultraviolet light
Explanation:
Ionizing radiation begins in the electromagnetic spectrum at the frequency of ultraviolet (UV) light. UV light has a higher frequency than visible light but lower frequency than X-rays and gamma rays, which are also considered ionizing radiation. When UV light interacts with matter, it can ionize atoms and molecules, leading to potentially harmful effects on living organisms. Therefore, it is important to take precautions and limit exposure to ionizing radiation.
What are 20 examples of pure substances?
The pure substances are, Water, Oxygen, Hydrogen, Nitrogen, Carbon dioxide, Gold, Silver, Iron, Copper, Aluminum, Graphite, Diamond, Sulfur, Chlorine, Sodium chloride, Sucrose, Glucose, Ethanol, Methane, Propane.
A pure substance is a material that consists of only one type of particle or molecule, which has a fixed chemical composition and distinct physical properties. These substances can be either elements, such as oxygen or gold, or compounds, such as water or table salt.
Pure substances cannot be broken down into simpler substances by physical or mechanical means, but they can be separated into their individual components through chemical reactions or methods such as distillation or filtration.
To know more about the pure substances, here
brainly.com/question/24462192
#SPJ4
A uniform E-field of magnitude E and directed horizontally fills a region of space. Points A through E are all inside the uniform field and form a rectangle with purely horizontal length d and purely vertical height h. Point C is in the center of this rectangle. A line from A to C makes an angle of θ with the direction of the E-field.
What is the magnitude of the electric potential difference between points A and E? Ignore the sign of this difference.
a. Ed
b. Ecos (0)/h2
c. E /d2+ h2
d. Edcos (0)
e. E/d2
The magnitude of the electric potential difference between points A and E is option (a) Ed
The electric potential difference between two points in an electric field is given by the product of the magnitude of the electric field and the distance between the points, multiplied by the cosine of the angle between the electric field and the direction of the displacement.
In this problem, we need to find the magnitude of the electric potential difference between points A and E, which are at opposite corners of the rectangle. We can find this difference by adding the potential differences between A and C, and between C and E. Since point C is at the center of the rectangle, the potential difference between A and C is the same as the potential difference between B and C, and the potential difference between C and E is the same as the potential difference between D and C.
Let's consider the potential difference between A and C. The distance between A and C is h/sin(θ), and the angle between the electric field and the direction of the displacement is θ. Therefore, the potential difference between A and C is:
ΔVAC = E × h/sin(θ) × cos(θ) = E × h cos(θ)/sin(θ) = E × h cot(θ)
Similarly, the potential difference between C and E is:
ΔVCE = E × h/sin(θ) × cos(θ) = E × h cos(θ)/sin(θ) = E × h cot(θ)
Therefore, the potential difference between A and E is:
ΔVAE = ΔVAC + ΔVCE = E × h cot(θ) + E × h cot(θ) = 2Eh cot(θ)
Now, we need to eliminate θ from the expression above. Note that d = h/tan(θ), so cot(θ) = 1/tan(θ) = d/h. Substituting this in the expression above, we get:
ΔVAE = 2Eh cot(θ) = 2Eh (d/2h) = Ed
Therefore, the correct option is (a) Ed
Learn more about potential difference here
brainly.com/question/23716417
#SPJ4
What is produced by a stream of electrons flowing through a wire that is coiled around an iron core?A. A radiation field. B. a static field. C. An atomic field. D. a magnetic field
The correct option is D. A magnetic subject is produced with the aid of a circulation of electrons flowing via a wire that is coiled around an iron middle.
A magnetic field is a physical field that is created by moving electric charges or by magnetic materials. The magnetic field is a vector field, which means that it has both magnitude and direction. The magnitude of the magnetic field at a given point in space is proportional to the strength of the magnetic force that a moving charged particle would experience at that point.
The magnetic field is typically represented by lines of force, which are imaginary lines that indicate the direction and strength of the magnetic field. The lines of force form closed loops around a magnetic material or a current-carrying conductor.
Magnetic fields have many important applications in physics, including in the study of electromagnetism, quantum mechanics, and astrophysics. They are used in lots of devices consisting including cars, turbines, and MRI machines. Understanding magnetic fields are crucial to understanding the behavior of charged particles in a wide range of physical systems.
To learn more about Magnetic field visit here:
brainly.com/question/14848188
#SPJ4
A car is speeding down the freeway. The car’s tires have an angular velocity of 50 rad/s. As the car accelerates, the wheels have an angular acceleration of 0.8 rad/s^2. What is the final angular velocity of the wheels after the car has accelerated for 10 seconds?
The final angular velocity of the wheels after the car has accelerated for 10 seconds is 58 rad/s.
What is velocity?Velocity is the speed of an object in a given direction. It is a vector quantity, which means that it has both a magnitude and a direction. The magnitude of velocity is equal to the rate of change of an object’s position. Velocity is usually measured in metres per second (m/s). In physics, velocity is usually expressed in terms of the direction of motion, such as towards the east, or away from the west. When an object’s velocity is constant, its motion is said to be uniform motion. When an object’s velocity changes, its motion is said to be non-uniform motion.
This is calculated by using the equation for angular velocity, which is ω = ω_0 + αt, where ω_0 is the initial angular velocity, α is the angular acceleration, and t is the time. In this case, ω_0 = 50 rad/s, α = 0.8 rad/s^2, and t = 10 s, so ω = 50 + (0.8)(10) = 58 rad/s.
To learn more about velocity
https://brainly.com/question/80295
#SPJ1
a lunar eclipse occurs when the ________ shadow falls on the ________.
A lunar eclipse occurs when the Earth's shadow falls on the Moon.
A lunar eclipse happens when the Earth comes between the Sun and the Moon, with the Earth blocking the sunlight from reaching the Moon's surface. The Earth casts a shadow that extends into space, and when the Moon moves through this shadow, it becomes obscured from the Sun's light, causing a lunar eclipse.
The Earth's shadow is divided into two parts: the outer penumbra and the inner umbra. When the Moon passes through the penumbra, it experiences a partial eclipse, with only a portion of its surface becoming obscured. When the Moon passes through the umbra, it experiences a total eclipse, with its entire surface becoming obscured.
Lunar eclipses are relatively common and can be observed from any location on the Earth where the Moon is visible during the eclipse. They are a spectacular astronomical event, providing a rare opportunity to witness the natural beauty and wonder of our universe.
Learn more about lunar eclipse here:
https://brainly.com/question/30629796
#SPJ4
where does the energy that propels a bicycle forward come from?
The energy that propels a bicycle forward ultimately comes from the rider, who supplies the power to pedal the bicycle.
When the rider pedals, they convert chemical energy from their body into mechanical energy, which is transmitted through the pedals to the chain and then to the wheels.
The mechanical energy from the wheels propels the bicycle forward by overcoming the resistance to motion provided by various forces such as friction, air resistance, and gravity. The energy is transferred from the wheels to the ground, and the ground pushes back with an equal and opposite force, propelling the bicycle forward.
In a sense, the energy that propels a bicycle forward comes from the food that the rider eats, which provides the chemical energy that is converted into mechanical energy through the process of metabolism. So, the rider's body acts as the power source for the bicycle, and the energy is transferred through the mechanical components of the bicycle to propel it forward.
Learn more about energy here: brainly.com/question/13881533
#SPJ4
(13%) Problem 5: A solid sphere of mass M and radius R rolls without slipping down rough incline that makes an angle € with the horizontal Otheexpertta.COm Find thc magnitudc of thc lincar accclcration a of thc sphcrc _ (Frade Summary Deductions Polenlial [uu% a = 5 g sine 5 a = 9 sine a = cose Submissions Atterrpts remnaining: 5 (2040 per attetupt) detailed vicw a = 9 C = g sine a = 9 cose Submil Hint Feedback give up'
The magnitude of the linear acceleration a of the sphere is 5/7gsinθ whose mass is M and radius is R.
Given the radius of sphere = R
The mass of sphere = M
The angle of inclination = θ
Let the linear acceleration = a
The horizontal force component = F x = Mgcosθ
The vertical force component = Fy = Mgsinθ
The magnitude of linear acceleration of the sphere can be determined using the equation of motion for a body rolling without slipping.
The friction will be acting opposite to the force such that:
Mgsinθ = Ma + Ff
Mgsinθ = Ma + Iα/R
The moment of inertia of solid sphere I = 2/5MR^2
gsinθ = a + 2/5a
gsinθ = a( 1 + 2/5)
a = 5/7gsinθ
Therefore, the magnitude of the linear acceleration of the sphere is equal to 5/7gsinθ.
To learn more about acceleration click here https://brainly.com/question/12550364
#SPJ4
what is a valid force that could be exerted on a car racing through narrow city streets?
A valid force that could be exerted on a car racing through narrow city streets would be the force of friction between the road and the car.
Friction is a force that resists the relative motion or tendency of two objects to slide or move across each other. It is the resistance that one surface or object encounters when moving over another. Friction is a force, and the magnitude of this force is determined by the nature of the two surfaces that are in contact, the normal force that presses them together, and the roughness of the surfaces. When two objects rub together, they create heat, which is a form of energy, and this energy is dissipated when the objects move apart. Friction is essential for everyday life, as it helps us walk and drive, and reduces the wear and tear of objects. It is also responsible for the grip we have on objects, and for slowing moving objects down.
For further learning about friction, refer to the link: https://brainly.com/question/24338873
#SPJ4
How to make 41 f to c?
41 Fahrenheit to Celsius is 5 °C where Fahrenheit and Celsius are related in that they are both units of temperature measurement.
To convert from Fahrenheit (F) to Celsius (C), use the formula:
[tex]C = (F - 32) * 5/9[/tex]
Therefore, to convert 41 F to C, substitute F with 41 and solve for C:
[tex]C = (41 - 32) * 5/9[/tex]
C = 9 * 5/9
C = 5 °C
The calculation to convert from Fahrenheit to Celsius takes the Fahrenheit temperature, subtracts 32 from it, and then multiplies the result by 5/9. This conversion formula takes into account the difference between the two temperature scales, with farenheit being the higher temperature scale and Celsius being the lower temperature scale.
To learn more about Celsius click here https://brainly.com/question/14767047
#SPJ4