If the temperature is constant, what change in volume would cause the pressure of an enclosed gas to be reduced to one quarter of its original value?

Answer: It is stronger

Explanation: The electric field=ΔV/Δl where l is the distance between the equipotential lines. Electric field strength is inversely proportional to the change in distance between the lines, so as the distance between the lines shrinks( become closer together) the electric field strength increases given that ΔV remains constant.

The main driving force thought to be behind the slowing of the Gulf Stream is believed to be climate change. As the atmosphere and oceans warm, the Gulf Stream is losing heat to the atmosphere.

The Gulf Stream is a powerful ocean current that originates in the Gulf of Mexico and flows northward along the eastern coast of the United States. It is part of the North Atlantic gyre, a system of circulating ocean currents. The Gulf Stream is an important part of the global conveyor belt, a system that helps regulate the ocean's climate by transporting warm tropical waters to cooler regions of the world. The Gulf Stream is so powerful that it is able to move more water than all of the world's rivers combined. It transports more than 100 million cubic meters of water per second and has a maximum speed of up to 5.6 km per hour.

To learn more about Gulf Stream

https://brainly.com/question/21478079

#SPJ1

98.5°F can be converted into °C by subtracting 30 from this number and then dividing the result by 2, so that 98.5°F equals 34.25°C.

Celsius and Fahrenheit are the units used to measure temperature ranges. Celsius scale is globally accepted while Fahrenheit scales is only used in five countries. Celsius is also called centigrade and is symbolized by C while Fahrenheit is symbolized as F. To convert F into C we can first subtract 30 from the given temperature in F, and then divide the whole by 2. Therefore, 98.5°F is equivalent to 34.25°C.

On the other hand, of you want to convert C into F, then first multiply the temperature given in Fahrenheit by 2, and then add 30 to get the result in °C. According to the Celsius scale, the normal body temperature of a human is 37°C, while in Fahrenheit it is 98.6°. Moreover, water freezes at 0°C and boils at 100°C.

Celsius scale is a part of metric system or commonly known as standard unit (SI) system.

To know more about Celsius scale, refer:

https://brainly.com/question/30402809

#SPJ4

Wind, water, and gravity, temperature changes, and pressure changes are all causes of physical weathering.

Pressure is a measure of the force exerted per unit area. It is a physical quantity that is used to describe the intensity of a force distributed over a surface. In other words, it refers to the amount of force applied to an object or substance divided by the area over which the force is applied. Pressure can be measured in a variety of units, such as pascals (Pa), pounds per square inch (psi), atmospheres (atm), and torr. The most common unit of pressure in everyday life is probably psi or atm, while in scientific contexts, the SI unit pascal is often used. Pressure is an important concept in many fields of science and engineering. It plays a critical role in fluid dynamics, thermodynamics, and mechanics, among others. Understanding how pressure works is important in a variety of applications, such as designing hydraulic systems, measuring blood pressure, predicting weather patterns, and analyzing the behavior of gases.

Here,

Physical weathering, also known as mechanical weathering, is the breakdown of rocks into smaller pieces without any change in their chemical composition. Wind, water, and gravity can all cause physical weathering by physically breaking rocks into smaller pieces. Temperature changes and pressure changes can also cause physical weathering by causing rocks to expand and contract, which can lead to cracks and fissures.

To know more about pressure,

https://brainly.com/question/6755373

#SPJ1

The figure below showing electrons moving along an electric current towards and away from the light bulb with arrows pointing right and left in both directions, indicates that the current is alternating.

What is Electric Current?

It is the rate at which electric charges move through a circuit, measured in amperes (A). Electric current is caused by the movement of electrons, which carry a negative charge, and it flows from a region of higher electric potential to a region of lower electric potential.

Electric current can be produced by a variety of sources, including batteries, generators, and power plants. The amount of current that flows through a circuit depends on the voltage, or electric potential difference, and the resistance of the circuit. Ohm's law describes the relationship between these variables: current is equal to voltage divided by resistance (I = V/R).

In an alternating current (AC), the flow of electric charge changes direction periodically, typically 50 or 60 times per second (50 or 60 Hertz). The direction of the current reverses periodically, causing the electrons to move back and forth, as shown in the figure. In a direct current (DC), the flow of electric charge is always in one direction, and the electrons move in one direction only.

Learn more about Electric current from given link

https://brainly.com/question/1100341

#SPJ1

A tone having a velocity of 343 m/s and a wavelength of 0.68 m can generate the following voices: baritone and tenor.

The speed of sound is constant at 343 m/s in dry air at room temperature, so the speed is not a determining factor for the pitch of a voice. The wavelength, however, is related to the pitch. The shorter the wavelength, the higher the pitch.

Based on the given wavelength of 0.68 m, we can determine the frequency of the sound using the formula:

frequency = speed / wavelength = 343 m/s / 0.68 m = 504.4 Hz

This frequency falls within the range of a baritone voice (196 Hz to 524 Hz) and a tenor voice (262 Hz to 698 Hz). Therefore, the correct answers are baritone and tenor.

See more about wavelength at https://brainly.com/question/10728818.

#SPJ11

The system's momentum and total kinetic energy are different before and after the collision depending on the location of the impact.This henceforth indicates that a net external force is exerted on the system.

In a closed system where no external forces act, the total momentum and total kinetic energy of the system are conserved. This is known as the conservation of momentum and the conservation of energy, respectively.

If external forces act on the system, then the total momentum and total kinetic energy of the system are not conserved. In this case, the net external force can be calculated by the change in momentum over time using Newton's second law, F = Δp/Δt.

To know more about change in momentum, visit:

https://brainly.com/question/30157362

#SPJ1

The average distance between sun and Neptune is 4.5 × 10¹² km and using the mass of both, the gravitational force between sun and Neptune is 6.44 × 10²⁰ N.

The gravitational force is a force by which an object attracts other objects its center of mass. The force exerted is related to the mass and distance between them as:

F = G m1 m2/ r²

where G = 6.67 ×10⁻¹¹ N km²/Kg²

The mass of sun = 1.9 × 10³⁰ kg

mass of Neptune = 1.03 × 10²⁶ kg.

distance between sun and Neptune = 4.5 × 10¹² km

Then, gravitational force between sun and Neptune is calculated as:

F = 6.67 ×10⁻¹¹ N km²/Kg² × 1.9 × 10³⁰ kg × 1.03 × 10²⁶ kg/ (4.5 × 10¹² km)²

  =  6.44 × 10²⁰ N.

Therefore, the gravitational force between sun and Neptune is

6.44 × 10²⁰ N.

Find more on gravitational force:

https://brainly.com/question/21500344

#SPJ1

The value of the circuit current is 2A or 6A when three  resistors are connected in series across a 12 V battery.

The circuit current can be calculated by using Ohm's law. Ohm's law states that the current (I) is equal to the voltage (V) divided by the resistance (R).

I = V/R

Given the three resistors are: R1, R2, R3 connected in series.

The power of battery = 12V

The resistance of first resistor = 1Ω

The voltage drop across second resistor (IR2) = 4V

The power dissipation across third resistor (P) = 12W

If we substitute the values given in the question, we get:

resistors are connected in series across a 12 V battery.

[tex]V = I(R1+R2+R3)[/tex]

[tex]P = I^2R3[/tex]

[tex]12 = I(1) + 4 + I * 12/I^2[/tex]

[tex]I^2 - 8I +12 = 0[/tex]

I = 2A or I = 6A

To learn more about resistors click here https://brainly.com/question/24297401

#SPJ4

The presence of molecular bands in the spectrum of a star indicate, they never become giants. Hence, the correct option is (D).

The presence of molecular bands in the spectrum of a star indicates that the star has a low surface temperature. The temperature of a star affects the amount of energy that is emitted from it, and this energy is spread out over a range of wavelengths. When the temperature is low, molecules can form in the outer regions of the star, and these molecules can absorb specific wavelengths of light, resulting in dark lines or bands in the star's spectrum. These molecular bands can be used to determine the chemical composition and temperature of the star. The relationship between temperature and the amount of radiation emitted by a star is proportional to temperature to the fourth power (known as the Stefan-Boltzmann law). The presence of molecular bands is not related to the number of electrons or protons in the star, nor does it indicate whether the star will become a giant or not.

To know more about spectrum please refer: https://brainly.com/question/15180087

#SPJ4

Answer:

Explanation:

Correct option is D)

Heat transfer is done by three ways conduction, convection and radiation. Radiation involves the energy transfer by electromagnetic radiations.

The values of the displacement of the string at x = 4. 0 m at 1 s intervals from t = 0 s to t = 6 s:

At t = 0 s ⇒ y (4.0, 0)

At t = 1 s ⇒ y (4.0, 1)

At t = 2 s ⇒ y (4.0, 2)

AT t = 3 s ⇒ y (4.0, 3)

At t = 4 s ⇒ y (4.0, 4)

At t = 5 s ⇒ y (4.0, 5)

At t = 6 s ⇒y (4.0, 6)

The displacement of the string at x = 4.0 m at 1 s intervals from t = 0 s to t = 6 s can be found by using the equation of the wave.

The equation of the wave is given by:
y(x,t) = A sin(kx - ωt)
Where,

A is the amplitude

k is the wave number

x is the position

ω is the angular frequency, and

t is the time.
Hence,
At t = 0 s:
A sin(k(4.0) - ω(0)) = y(4.0, 0)
At t = 1 s:
A sin(k(4.0) - ω(1)) = y(4.0, 1)
At t = 2 s:
A sin(k(4.0) - ω(2)) = y(4.0, 2)
At t = 3 s:
A sin(k(4.0) - ω(3)) = y(4.0, 3)
At t = 4 s:
A sin(k(4.0) - ω(4)) = y(4.0, 4)
At t = 5 s:
A sin(k(4.0) - ω(5)) = y(4.0, 5)
At t = 6 s:
A sin(k(4.0) - ω(6)) = y(4.0, 6)
The values of the displacement of the string at x = 4.0 m at 1 s intervals from t = 0 s to t = 6 s are given by the values of y at each time interval.

Learn more about wave function here: https://brainly.com/question/29749681

#SPJ11

Answer:

R+h=R and g=GM/R^2

Explanation:

gravitational energy is potential energy stored in an object based on its distance from the Earth

Answer:

The first one is weight and the second one is roughness.

Explanation:

At the end of the sentence it says surfaces which one can assume texture, therefore roughness would most likely go last.

Temperature is a continuous variable, meaning that it can take on a wide range of values, including fractional values.

Temperature is a continuous quantitative variable that can be either an independent or dependent variable depending on the context.

Temperature is a physical quantity that describes the degree of hotness or coldness of an object or environment. It is a continuous variable, meaning that it can take on a wide range of values, including fractional values. As such, temperature is considered a quantitative variable, as it can be measured and expressed numerically.

Furthermore, temperature can be either an independent variable or a dependent variable, depending on the context in which it is being used. For example, in a scientific experiment investigating the effects of temperature on a chemical reaction, temperature would be an independent variable, as it is being deliberately manipulated by the researcher. On the other hand, in a study investigating the relationship between temperature and the rate of plant growth, temperature would be a dependent variable, as it is being measured and observed based on the conditions of the experiment.

Learn more about temperature here:

https://brainly.com/question/12152879

#SPJ4

A continuous load is a load where the maximum current is expected to continue for 3 hours or more.

A current load is the amount of current that is passing through an electrical device that is receiving power. The electric current is the amount of the charges that is flowing through a area of cross section per unit time.

If the maximum current is applied continuously for more than 3 hours at a place than it is called a current load.

This standard of three or more hours is decide the National Electrical Code of United States of America.

To know more about current load, visit,

https://brainly.com/question/29733410

#SPJ4

The given statement, "When a car goes around a curve of smaller and smaller radius, the centripetal force on it decreases." is false.

The centripetal force required to keep a car moving in a curved path at a constant speed is directly proportional to the square of its velocity and inversely proportional to the radius of the curve.

As the radius of the curve decreases, the required centripetal force increases, not decreases. If the centripetal force on the car decreases, it would move out of its circular path, implying a decrease in velocity or radius of curvature.

To know more about the centripetal force, here

brainly.com/question/11324711

#SPJ4

a. Momentum is before band, 1400 kg m/s. b. Momentum after the band is,  -1400 kg m/s. c. Change in momentum is, -2800 kg m/s. d. Necessary impulse is, -2800 kg m/s. e. Necessary force is, -2800 N.

a. The momentum of water before the bend is given by the product of its mass and velocity,

p1 = mv = (1000 kg)(1.4 m/s) = 1400 kg m/s in the direction of x-axis.

b. The momentum of water after the bend is also given by the product of its mass and velocity,

p2 = mv = (1000 kg)(-1.4 m/s) = -1400 kg m/s in the direction of y-axis.

c. The change in momentum of the 1000 kg of water is given by the vector subtraction,

Δp = p2 - p1 = (-1400 kg m/s) - (1400 kg m/s) = -2800 kg m/s in the direction of y-axis.

d. The necessary impulse is equal to the change in momentum,

J = Δp = -2800 kg m/s in the direction of y-axis.

e. The necessary force is given by the impulse divided by the time interval over which it acts:

F = J/Δt = (-2800 kg m/s) / (1.0 s) = -2800 N in the direction of y-axis.

To know more about the impulse, here

brainly.com/question/30466819

#SPJ4

The work done is equal to 85 N x 15 m, which is equal to 1275 Nm.

Work is an activity involving mental or physical effort done in order to achieve a result. It can be done for pay, as a hobby, or for any other purpose. It can be done alone or with the help of others. Work can be done in a variety of settings and can involve a wide range of tasks and skills. It is an essential part of many people's lives and can be a source of satisfaction, pride, and fulfillment.

The work done is equal to the force multiplied by the distance moved. Therefore, the work done is equal to 85 N x 15 m, which is equal to 1275 Nm.

To learn more about work
https://brainly.com/question/29266754
#SPJ1

The molecular formula of benzaldehyde is C₇H₆O. So the molar mass of benzaldehyde will be 106.12 g/mol.

Molar mass is the mass in gram for one mole of a substance. We can define it as the mass of 6.022 × 10²³ molecules. Usually molar mass of compounds are calculated by adding the individual molar mass of its constituent atoms.

The molecular formula for benzaldehyde is C₇H₆O.

Molar mass of carbon = 12.011

Molar mass of hydrogen = 1.00784

Molar mass of oxygen = 15.999

Molar mass of benzaldehyde = (7× 12.011) + ( 6× 1.00784) + 15.999 = 106.12 g/mol

So the molar mass of benzaldehyde is 106.12g/mol

For more information regarding molar mass, kindly refer

https://brainly.com/question/12127540

#SPJ4

the initial velocity of object B was 1.475 meters per second.

A conservation law states that the total linear momentum of a closed system remains constant through time, regardless of other possible changes within the system.

Given, A is a sphere that is traveling with a velocity of (3.7) m/s and had a mass of 5 kg.

It collides with sphere B and both particles move together with a velocity of (1.4) m/s after the collision.

From the law of conservation:

Momentum will be the same in case of collision

p₁ = p₂

m₁ v₁ = m₂ v₂

Where P₁ = initial momentum of the system,

P₂ = final momentum of the system,

m₁ = mass of the first object,

v₁ = velocity of the first object,

m₂ = mass of the second object

v₂ = velocity of the second object.

In our case,

m₁ = 5 kg

v₁ = 3.7

Since the mass of B is given 4 kg

m₂ = 4 kg

The final mass will be M = m₁ + m₂

M = 4 + 5

M = 9 Kg

Final velocity V = 1.4 m/s

Applying conservation of momentum:

m₁ v₁ + m₂ v₂ = M V

5 * 3.7 + 4 v = 9 * 1.4

18.5 + 4v = 12.6

4v = 18.5 - 12.6

4v = 5.9

v = 1.475

thus, the initial velocity of the object B was 1.475 meters per second.

Learn more about the conservation of momentum here:

https://brainly.com/question/3920210

#SPJ1

Answer:

the electrons circle around the nucleus

Explanation:

since you can see the electrons in their respective orbitals in the Bohr model it has been deemed the planetary model. Like how planets orbit the sun, electrons orbit the nucleus.

The given statement 'Electrically neutral objects cannot exert an electrical force on each other, but they can exert a gravitational force on each other' is false because there exists an electrical force between neutral objects also.  

Negative and positive charges are equal in a neutral object. If an object is electrically neutral it has no net charge because it has the same amount of protons as it does electrons, which are opposite charges that offset each other.

Any charged object will engage favourably with a neutral object, whether it is positively or negatively charged. Neutral items and positively charged objects are drawn to one another. Additionally, neutral and negatively charged items are drawn to one another.

There is no net charge on neutral objects but there exists an electric force on each other.

To know more about charges:

https://brainly.com/question/30479515

#SPJ4

The magnetic field of two magnets is seen in the above figure: Label the other magnet poles on a copy of the diagram. 

What characteristics does a magnet have?

A substance or thing that creates a magnetic field is called a magnet. The most noteworthy characteristic of a magnet—a force that draws on other ferromagnetic elements, such as metal, steel, nickel, cobalt, etc.—as well as the ability to attract or repel other magnets—is caused by this invisible magnetic field.

What gives magnetism its origin?

The magnetic fields that surround magnets are what cause magnetism. By examining the forces that the fields apply to other magnets or magnetic fluids, the forces can be studied. A magnet can push against another magnet that is close by. There are two poles on magnets: Near the magnet's poles, the magnetic force is greatest.

To know more about magnet visit:

https://brainly.com/question/2841288

#SPJ1

The change in dew point depends on a number of factors, such as the humidity of the air and the amount of moisture in the air.

If the temperature outside increases by 10 degrees C, the air will become warmer and more humid, which will increase the dew point. Generally speaking, the higher the temperature, the higher the dew point. If the humidity and moisture content of the air remain the same, then a 10 degree C increase in temperature would result in a corresponding increase in dew point. The change in dew point would depend on the existing atmospheric conditions at the time. Dew point is the temperature at which the air becomes saturated with water vapor and the vapor begins to condense and form dew.

To learn more about dew point click here https://brainly.com/question/29550660

#SPJ4

Many people are proponents of using nuclear power instead of burning coal to generate electricity. However, the environmental disadvantage of this is that it poses a risk of exposure to radioactive elements which causes mutation and cancer in plants and animals.

Nuclear power is the energy that is released from the nucleus of an atom during a process called nuclear fission. This process involves splitting the nucleus of a heavy atom, such as uranium or plutonium, into smaller fragments, which results in the release of large amounts of energy in the form of heat and radiation.

This heat can be used to produce steam, which drives a turbine to generate electricity. Nuclear power plants use this technology to produce a significant amount of electricity without emitting greenhouse gases, unlike traditional fossil fuel power plants.

However, the use of nuclear power also poses significant risks, such as the potential for nuclear accidents and the production of radioactive waste, which can remain hazardous for thousands of years. These risks must be carefully managed and minimized through strict safety protocols and responsible waste management practices.

To learn more about Nuclear power visit here:

brainly.com/question/18769119

#SPJ4

The conversion of 17 degrees Celsius to Fahrenheit is 62.6 degrees Fahrenheit.

The equation F = 9/5C + 32 relates temperature measured in degrees Celsius (C) to degrees Fahrenheit (F). The formula is used to convert temperatures from Celsius to Fahrenheit , and vice versa. To use the formula, you simply plug in the known temperature in Celsius (or Fahrenheit), and then solve for the unknown temperature in Fahrenheit (or Celsius).

To convert Celsius to Fahrenheit, you would use the formula F = 9/5C + 32, where C is the temperature in Celsius and F is the temperature in Fahrenheit. Thus, for 17 degrees Celsius, the formula would be F = 9/5(17) + 32 = 62.6 F.

To know more about celsius please refer:

https://brainly.com/question/14767047

#SPJ4

The speed of the water as it exits the tap is approximately 1.89 m/s.

We can use the principle of conservation of mass and energy to solve this problem. Assuming that the water is incompressible and the flow is steady, the mass flow rate of water at the tap is constant. Therefore, the mass flow rate at the tap is equal to the mass flow rate at the exit:

ρ1A1v1 = ρ2A2v2

where:

We can rearrange this equation to solve for v2:

v2 = (ρ1A1v1) / (ρ2A2)

We know that A1 = 1.5 cm², A2 = 0.45 cm², and the vertical distance fallen is 6.0 cm. We can find the speed of water at the tap using the equation for the potential energy:

mgh = (1/2)mv1²

where m is the mass of the water, g is the acceleration due to gravity, h is the vertical distance fallen, and v1 is the speed of water at the tap.

We can rearrange this equation to solve for v1:

v1 = √(2gh)

where;

We also know that the density of water at room temperature is approximately 1000 kg/m³, which is equivalent to 0.001 g/cm³.

Putting all these values into the equation for v2, we get:

v2 = (0.001 g/cm³ x 1.5 cm² x sqrt(2 x 9.81 m/s² x 6.0 cm)) / (0.001 g/cm³ x 0.45 cm²)

Simplifying this expression, we get:

v2 = 1.89 m/s

Learn more about speed of water here: https://brainly.com/question/19091787

#SPJ1

Jolie is on the weightlifting team at her school, She uses a force of 5 N to lift 150 pounds of weight to a height of 1.5 m, so the work she will do is 5057.55 joules to lift the weight.

What effect does weightlifting have on the body?

To know more about weightlifting, click the link given below:

brainly.com/question/12008219

#SPJ1

The force diagram of the player has been shown in the image attached here.

The force diagram of a player sliding to a stop depends on the specific situation and factors such as the player's mass, velocity, and the surface on which they are sliding. However, we can make some generalizations based on common assumptions and considerations.

We know that the force of kinetic friction that is sliding the player to a stop would tend to have a higher magnitude as shown by the force diagram.

Learn more  about force diagram:https://brainly.com/question/20360770

#SPJ1