Magnification (m) of a lens or mirror is negative when the image formed by the lens or mirror is inverted relative to the object.
Magnification (m) of a lens or mirror is negative when the image formed by the lens or mirror is inverted relative to the object. This means that the top of the object is imaged at the bottom of the image, and vice versa.
In general, magnification describes the degree to which an optical system can increase or decrease the size of an object. It is defined as the ratio of the size of the image (h') to the size of the object (h), and can be expressed mathematically as:
m = -h' / h
When the magnification is negative, it indicates that the image is inverted relative to the object. When the magnification is positive, it indicates that the image is upright relative to the object. A magnification of zero would indicate that the image is the same size as the object.
Visit to know more about Magnification:-
brainly.com/question/30402564
#SPJ11
Which stars are the most common?
A) Stars with a larger mass and a larger radius than the Sun's are the most common.
B) Stars with a smaller mass and a smaller radius than the Sun's are the most common.
C) Stars with a larger mass and a smaller radius than the Sun's are the most common.
D) Stars with a smaller mass and a larger radius than the Sun's are the most common.
E) All of the above are equally common.
Stars are born within the clouds of dust and scattered throughout most galaxies. A familiar example of such as a dust cloud is the Orion Nebula. The correct answer about stars is B
Stars are the most widely recognized astronomical objects, and represent the most fundamental building blocks of galaxies. The age, distribution, and composition of the stars in a galaxy trace the history, dynamics, and evolution of that galaxy. Moreover, stars are responsible for the manufacture and distribution of heavy elements such as carbon, nitrogen, and oxygen, and their characteristics are intimately tied to the characteristics of the planetary systems that may coalesce about them. Consequently, the study of the birth, life, and death of stars is central to the field of astronomy. The most common stars in the universe are those with a smaller mass and a smaller radius than the Sun's. Therefore, the correct answer is B) Stars with a smaller mass and a smaller radius than the Sun's are the most common. These stars are known as red dwarfs and they make up about 70-80% of all stars in the universe. Stars with a larger mass and radius than the Sun's, such as blue giants or super giants, are much less common.
learn about stars,
https://brainly.com/question/5284480
#SPJ11
How would you best describe the behavior of the wave in the diagrams when it reaches the boundary between the big particles and the small particles?
When a wave reaches the boundary between media with different properties, several behaviors may occur:
What happens when two waves reaches a boundary?Reflection: A portion of the wave may bounce back into the original medium, following the law of reflection, which states that the angle of incidence is equal to the angle of reflection. This occurs when the wave encounters a medium with a higher density or different refractive index, causing the wave to change direction and reflect back.
Refraction: Another portion of the wave may continue to propagate into the new medium, but change direction due to a change in speed and wavelength. This bending of the wave is called refraction, and it occurs when the wave enters a medium with a different density or refractive index.
Transmission: The remaining portion of the wave may continue to propagate through the new medium without changing direction, if the properties of the two media are such that the wave is not significantly affected.
The specific behavior of the wave at the boundary between big particles and small particles would depend on various factors, such as the angle of incidence, the properties of the media (e.g., density, refractive index), and the characteristics of the wave (e.g., frequency, wavelength).
Learn more about wave at boundary here: https://brainly.com/question/30420966
#SPJ1
what is the initial angular momentum of the ball, in newton seconds, right before the collision relative to the pivot point of the rod?
To calculate the initial angular momentum of the ball right before the collision relative to the pivot point of the rod, we need some information about the ball and the system, such as the mass of the ball, its velocity, and the distance from the pivot point to the collision point.
Did you ever find yourself wishing for an angular momentum calculator. We think we have all wished, at some point in our lives, that we had a calculator which would come and solve our physics queries. Well, don t worry, your wish has been answered with this calculator that tells you how to calculate angular momentum. Our angular momentum calculator is a user-friendly tool that allows you to find angular momentum in two ways, so you can use it with all the data you have gathered. We will also talk about the conservation of angular momentum and some examples.
learn more about momentum here
https://brainly.com/question/15826358
#SPJ11
Question 63 Marks: 1 Everyone is subject to natural background radiation.Choose one answer. a. True b. False
Everyone is subject to natural background radiation is (a). true statement because natural background radiation, which includes radiation from the environment and natural sources including radon gas from the ground, cosmic rays from space, and radioactive elements in the earth's crust, is a risk to everyone.
Humans are inevitably exposed to this type of radiation on a regular basis, albeit the amounts differ according to altitude, geography, and other factors. The amount of ionizing radiation in the environment at a specific location that isn't the result of intentional introduction of radiation sources is known as background radiation.
There are many different natural and man-made sources of background radiation. In addition to man-made medical X-rays, radioactive fallout from nuclear weapons testing, and nuclear accidents, these include cosmic radiation as well as environmental radioactivity from naturally occurring radioactive minerals (such as radon and radium).
To know more about natural
https://brainly.com/question/10423822
#SPJ4
if the ball hits olaf and bounces off his chest horizontally at 7.40 m/s in the opposite direction, what is his speed vf after the collision?express your answer numerically in meters per second.
Olaf's speed after the collision is 0.296 m/s.
To solve this problem, we can use the law of conservation of momentum, which states that the total momentum before a collision is equal to the total momentum after the collision.
Let's assume that the ball has a mass of 0.2 kg and was moving at a speed of 7.40 m/s before the collision. Olaf has a mass of 5 kg and was initially at rest.
Before the collision, the total momentum is:
p = [tex]m_{1}[/tex] * [tex]v_{1}[/tex] + [tex]m_{2}[/tex] * [tex]v_{2}[/tex]
p = 0.2 kg * 7.40 m/s + 5 kg * 0 m/s
p = 1.48 kg m/s
After the collision, the ball bounces off Olaf's chest and moves in the opposite direction with a speed of 7.40 m/s. Let's call Olaf's final velocity [tex]v_{f}[/tex] .
he total momentum after the collision is:
p' = [tex]m_{1}[/tex] *[tex]v_{1}[/tex] ' + [tex]m_{2}[/tex] * [tex]v_{2}[/tex] '
p' = 0.2 kg * (-7.40 m/s) + 5 kg * [tex]v_{f}[/tex]
p' = -1.48 kg m/s + 5 kg * [tex]v_{f}[/tex]
Since momentum is conserved, we can equate p and p':
p = p'
1.48 kg m/s = -1.48 kg m/s + 5 kg *[tex]v_{f}[/tex]
Solving for[tex]v_{f}[/tex] , we get:
[tex]v_{f}[/tex] = (1.48 kg m/s + 1.48 kg m/s) / 5 kg
[tex]v_{f}[/tex] = 0.296 m/s
Therefore, Olaf's speed after the collision is 0.296 m/s.
Learn more about momentum here: https://brainly.com/question/30677308
#SPJ11
which of following statement regarding holography is incorrect? a. unlike a photography, the holography records both amplitude and phase information of the imaged objects. b. an optical hologram is produced through two beam interference, while image is reconstructed through light diffraction. c. since several types of holograms can be reconstructed using regular white light, these holograms can produce and show true color images. d. when reconstruction beam only illuminates a small section of a hologram, one can still see whole image of the recorded object with lower resolution.
The incorrect statement regarding holography is c. It is not true that several types of holograms can be reconstructed using regular white light to produce and show true color images.
In fact, most holograms are recorded and reconstructed using monochromatic light sources, such as lasers, which do not produce a full spectrum of colors.
The incorrect statement regarding holography is: c. since several types of holograms can be reconstructed using regular white light, these holograms can produce and show true color images. Most holograms require monochromatic light for proper reconstruction, and white light can cause distortions in color reproduction.
To know more about Holography click here .
brainly.com/question/1899017
#SPJ11
Question 38
Which one of the following gases was not scheduled for phaseout by 1996 as a result of the Montreal Protocol?
a. chlorofluorocarbon
b. halon
c. methyl chloroform
d. carbon tetrachloride
The correct answer is d. carbon tetrachloride. The Montreal Protocol, which was signed in 1987, aimed to reduce the production and consumption of ozone-depleting substances, including chlorofluorocarbons (CFCs), halons, and methyl chloroform.
However, carbon tetrachloride was not specifically scheduled for phaseout by 1996 under the protocol.
The Montreal Protocol scheduled phaseouts for several gases by 1996. However, methyl chloroform (option c) was not scheduled for phaseout by that specific year.
The other gases listed, including chlorofluorocarbon, halon, and carbon tetrachloride, were scheduled for phaseout.
To know more about Tetrachloride click here .
brainly.com/question/30849888
#SPJ11
The packing gland serves many functions in a centrifugal pump. Among these, it Keeps gritty material from entering the?
a. Acts as a coolant to keep the pump bearing from overheating
b. Keeps gritty material from entering the packing box
c. Keeps the pump primed
d. Prevents cavitation
option (b). The packing gland serves many functions in a centrifugal pump. Among these, it keeps gritty material from entering the packing box. The packing gland is an important component of a centrifugal pump that helps to maintain the pump's efficiency and prevent damage to its internal parts.
One of its primary functions is to seal the area where the pump shaft exits the casing, which is known as the packing box. This is important because the pump shaft rotates at high speeds and generates significant friction, which can cause wear and tear on the packing box if it is not properly sealed.
One of the main challenges of operating a centrifugal pump is that it can become clogged with gritty or abrasive materials that can cause damage to the pump's internal components. The packing gland helps to prevent this by creating a tight seal around the pump shaft that keeps these materials from entering the packing box. This not only helps to prevent damage to the pump but also ensures that the pump operates more efficiently and has a longer service life.
Find out more about packing gland
brainly.com/question/15585444
#SPJ11
Now, let's look at a situation with changing flux. Starting from the far left of the screen, move the magnet to the right so it goes through the middle of the current loop at a constant speed and out to the right of the loop.Roughly where is the magnet when the light bulb is the brightest? (The brightness of the light bulb is depicted by the length of the rays emanating from it.)
When the magnet moves through the current loop, the changing magnetic flux induces an electromotive force (EMF) according to Faraday's Law of Electromagnetic Induction.
This induced EMF causes a current to flow in the loop, which lights up the bulb. The light bulb will be the brightest when the rate of change of the magnetic flux is at its maximum. This occurs when the magnet is closest to the center of the loop, as the magnetic field lines are concentrated at this point, and the magnet's movement causes a significant change in the magnetic flux. So, the magnet is roughly at the center of the current loop when the light bulb is the brightest.
To learn more about magnetic flux click here https://brainly.com/question/30858765
#SPJ11
2. Apply Mathematics If the amplitude of the 6 PM wave increases to 0. 6 m, how many times greater would the energy become?
(Please explain solving it too please)
The energy becomes four times greater than the original energy.
The energy of a wave is proportional to the square of its amplitude. In the given problem, the amplitude of the 6 PM wave increases from 0.3 m to 0.6 m.
If the amplitude of the 6 PM wave increases to 0.6 m, the ratio of the new energy to the original energy can be calculated as follows:
(new energy) / (original energy) = (new amplitude)^2 / (original amplitude)^2
(new energy) / (original energy) = (0.6)^2 / (0.3)^2
(new energy) / (original energy) = 4
Therefore, if the amplitude of the 6 PM wave increases to 0.6 m, the energy becomes four times greater than the original energy.
To know more about amplitude, here
brainly.com/question/8662436
#SPJ4
the speed of sound increases by about 0.4 m/s for each degree celsius when the air temperature rises. for a given sound, as the temperature increases, what happens to the wavelength?
As the temperature of the air increases, the speed of sound also increases.
This is because warmer air molecules move faster and collide with each other more frequently, which makes sound waves travel faster through the medium.
According to the given information, the speed of sound increases by about 0.4 m/s for each degree Celsius of temperature rise.
The wavelength of a sound wave is directly proportional to the speed of sound in the medium. This means that as the speed of sound increases, the wavelength of the sound wave also increases.
The relationship between the two is described by the formula:
wavelength = speed of sound / frequency
Since the frequency of the sound wave remains constant, an increase in the speed of sound due to a rise in temperature will result in an increase in the wavelength of the sound wave.
Therefore, as the air temperature increases, the wavelength of the sound wave also increases.
It is worth noting that the effect of temperature on sound waves is more significant for high-frequency sounds, such as those produced by musical instruments or human speech.
This is because high-frequency sounds have shorter wavelengths and are more strongly influenced by changes in the speed of sound. In summary, as the air temperature rises, the speed of sound increases, resulting in an increase in the wavelength of the sound wave.
To know more about temperature of the air here
https://brainly.com/question/26706491
#SPJ11
The wavelength of a particular sound decreases as air temperature increases.
This is due to the fact that while the frequency of sound fluctuates with temperature, the speed does not. Since speed equals frequency times wavelength, the equation must hold if speed increases while the frequency remains constant. In other words, since the speed has increased, the same number of waves will pass a location in less time, hence the wavelength must be smaller to make up for it. In disciplines like acoustics and meteorology, this phenomenon—known as the dependence of the speed of sound on temperature—must be taken into account.
learn more about wavelength here:
https://brainly.com/question/13533093
#SPJ11
in which case does viscosity play a dominant role? case a: a typical bacterium (size ~ 1 mm and velocity ~ 20 mm/s ) in fresh water. case b: a swimmer (size ~ 1.5 m and velocity ~ 3 m/s ) in fresh water.
Viscosity plays a dominant role in case a, with the typical bacterium moving slowly through the water due to its small size and high viscosity of the water.
In case b, the swimmer's larger size and higher velocity mean that the effects of viscosity are much less significant, as the swimmer is able to move more easily through the water. Viscosity plays a dominant role in Case A, where a typical bacterium (size ~ 1 mm and velocity ~ 20 mm/s) is in fresh water.
Due to the bacterium's small size and relatively low velocity, the effects of viscosity become more significant, impacting its movement through the fluid. In contrast,
Case B involves a swimmer (size ~ 1.5 m and velocity ~ 3 m/s) in fresh water, where the larger size and higher velocity lessen the impact of viscosity on the swimmer's movement.
To learn more about Viscosity click here
brainly.com/question/30759211
#SPJ11
2. A 100Ω, 300Ω, and 200Ω resistor are all connected in series. What is the resistance?
The total resistance of the circuit would be the sum of the individual resistances, which in this case is 100Ω + 300Ω + 200Ω = 600Ω.
When resistors are connected in series, the total resistance is the sum of the individual resistances. In this case, you have a 100Ω, 300Ω, and 200Ω resistor connected in series. To find the total resistance, simply add the three values together: Total resistance = 100Ω + 300Ω + 200Ω = 600ΩSo, the total resistance of the series connection is 600Ω.Resistance is a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms, symbolized by the Greek letter omega (Ω). Ohms are named after Georg Simon Ohm (1784-1854), a German physicist who studied the relationship between voltage, current and resistane
To know more about resistance please vist :-
https://brainly.com/question/14023824
#SPJ11
Question 14
Slight, irreversible hearing loss may result for many people, from daily exposure over an 8 hour period of time to sound averaging:
a. 55 dB
b. 65 dB
c. 75 dB
d. 85 dB
The correct answer is d. 85 dB. Slight, irreversible hearing loss may result from daily exposure to sound averaging 85 dB over an 8 hour period of time.
It is important to protect your hearing by limiting exposure to loud sounds and wearing hearing protection when necessary. At 85 dB, there is a high risk of developing hearing loss from exposure over an 8 hour period. According to OSHA, the permissible exposure limit for continuous noise exposures is 90 dB for 8 hours. Therefore, exposure to 85 dB for 8 hours is considered to be highly risky and could potentially lead to a slight, irreversible hearing loss.
To learn more about sound click here https://brainly.com/question/31176646
#SPJ11
Question 12 Marks: 1 Large items that are not recyclable should beChoose one answer. a. set directly into the landfill b. placed in a separate area of the landfill for periodic burial c. compressed or shredded d. b and c
compressed or shredded Large items that are not recyclable should be compressed or shredded before being disposed of in a landfill.
This helps to save space in the landfill and can also make it easier to cover the waste with soil or other materials. Some landfills have special equipment that can crush or shred large items like furniture, appliances, and tree limbs. This process can also help to reduce the amount of methane gas that is produced by the decomposition of organic materials in the landfill. Large items that are not recyclable should be compressed or shredded.
Learn more about decomposition here:
https://brainly.com/question/8009068
#SPJ11
two pure tones are sounded together and a particular beat frequency is heard. what happens to the beat frequency if the frequency of one of the tones is increased?group of answer choicesit increases.it decreases.we cannot tell from the information given.it becomes zero.it does not change.
When two pure tones are sounded together, a beat frequency is created as a result of the interference between the two tones. The beat frequency is the difference in frequency between the two tones. It is heard as a periodic variation in volume, causing a pulsing or "beating" effect.
If the frequency of one of the tones is increased, the difference in frequency between the two tones will also increase, resulting in an increase in the beat frequency. This means that the pulsing or beating effect will become faster.
To understand this better, let's take an example:
Suppose we have two tones with frequencies of 400 Hz and 410 Hz. The beat frequency is the difference between these two frequencies:
Beat frequency = |410 Hz - 400 Hz| = 10 Hz
Now, let's say we increase the frequency of the first tone to 420 Hz. The new beat frequency will be:
New beat frequency = |420 Hz - 410 Hz| = 10 Hz
As you can see, the beat frequency has increased from 10 Hz to 20 Hz. This means that the pulsing or beating effect will become faster.
In conclusion, when the frequency of one of the tones is increased, the beat frequency increases.
For more information on beat frequency see:
https://brainly.com/question/14705053
#SPJ11
11) The primary way that we observe the atomic hydrogen that makes up most of the interstellar gas in the Milky Way is with A) ground-based visible-light telescopes.
B) space-based ultraviolet telescopes.
C) X-ray telescopes.
D) radio telescopes observing at a wavelength of 21 centimeters.
D) radio telescopes observing at a wavelength of 21 centimeters are the primary way that we observe the atomic hydrogen that makes up most of the interstellar gas in the Milky Way.
This is because hydrogen atoms are able to emit radiation at a wavelength of 21 cm, and radio telescopes are able to detect this radiation. By measuring the intensity of the radiation, astronomers can measure the amount of hydrogen in different regions of the Milky Way. By measuring the intensity of this emission line, astronomers can map out the amount of neutral hydrogen gas in the Milky Way, including its distribution and motion.
Learn more about emission Refer: https://brainly.com/question/14457310
#SPJ11
a particular light bulb filament emits 55.8 watts of blackbody (thermal) radiation when it is held at a temperature of 2,231 degrees celsius. how much power will it radiate if the temperature is raised to 3,073 degrees c? give your answer in watts with an accuracy of 1 w. you answered
At a temperature of 2,231 degrees Celsius, the light bulb filament emits 55.8 watts of blackbody radiation.
Using the Stefan-Boltzmann law, we can determine the power emitted at 3,073 degrees Celsius:
P = σA(T^4)
Where P is the power emitted, σ is the Stefan-Boltzmann constant (5.67 x 10^-8 W/m^2*K^4), A is the surface area of the filament, and T is the absolute temperature.
Assuming the surface area of the filament remains constant, we can set up a proportion:
(P1)/(T1^4) = (P2)/(T2^4)
Substituting in the values we know:
(55.8)/(2504^4) = (P2)/(3346^4)
Solving for P2:
P2 = (55.8 x 3346^4)/(2504^4) = 214.4 watts
Therefore, if the temperature is raised to 3,073 degrees Celsius, the light bulb filament will radiate approximately 214.4 watts of blackbody radiation.
To solve this problem, we'll use the Stefan-Boltzmann Law, which states that the power radiated by a blackbody (like a light bulb filament) is proportional to the fourth power of its temperature in Kelvin. Here are the steps to find the power at the new temperature:
1. Convert the initial and final temperatures from Celsius to Kelvin:
T1 = 2,231°C + 273.15 = 2,504.15 K
T2 = 3,073°C + 273.15 = 3,346.15 K
2. Find the ratio of the temperatures raised to the fourth power:
(T2/T1)^4 = (3,346.15/2,504.15)^4 ≈ 3.787
3. Multiply the initial power by the temperature ratio to find the new power:
P2 = P1 * (T2/T1)^4
P2 = 55.8 W * 3.787 ≈ 211.383 W
4. Round the answer to the nearest watt:
P2 ≈ 211 W
So, the light bulb filament will radiate approximately 211 watts when its temperature is raised to 3,073 degrees Celsius.
Learn more about the absolute temperature here:- brainly.in/question/26162043.
#SPJ11
8) Elements heavier than hydrogen and helium constitute about ________ of the mass of the interstellar medium. A) 0.002% B) 2% C) 70% D) 98%
The D 98%. Elements heavier than hydrogen and helium are known as "heavy elements" or "metals" in astronomy. These elements are formed through nuclear fusion in stars and supernova explosions and make up the majority of the interstellar medium's mass.
Only a small fraction of the interstellar medium is made up of hydrogen and helium. metals astronomy The Elements heavier than hydrogen and helium constitute about B 2% of the mass of the interstellar medium. These heavier elements are often referred to as "metals" in astronomical terms, and they make up a small percentage compared to the more abundant hydrogen and helium.
learn more about heavier here
https://brainly.com/question/24262632
#SPJ11
15. table 17.2 lists the temperature ranges that correspond to the different spectral types. what part of the star do these temperatures refer to? why?
The temperatures listed in table 17.2 refer to the surface temperatures of stars. This is because the spectral types of stars are determined based on the characteristics of their spectra.
which are produced by the outer layers of the star. The spectral types are related to the temperatures of the stars because the temperature of a star's outer layers determines which elements are present and how they emit light, which creates the unique spectral signature for each star.
Therefore, the temperature ranges listed in the table correspond to the different spectral types because they reflect the surface temperatures of the stars that produce those spectra. The temperatures listed in Table 17.2 corresponding to different spectral types refer to the effective temperatures of a star's photosphere.
The photosphere is the outermost layer of a star that emits visible light, making it the part we observe when determining a star's spectral classification. These temperatures are important because they help characterize the star's properties, including its color and brightness, and provide insights into its stage in stellar evolution.
To know more about light click here
brainly.com/question/9695421
#SPJ11
Question 3 Marks: 1 After a landfill site is closed, it should be covered with at least ______ of compacted soil having a low permeability, graded to shed rainwater, melting snow, and surface water.Choose one answer. a. 5 feet b. 3 feet c. 2 feet d. 6 feet
After a landfill site is closed, it should be covered with at least 2 feet of compacted soil having a low permeability, graded to shed rainwater, melting snow, and surface water. So, the correct answer is c. 2 feet.
This cover is intended to minimize the infiltration of water into the landfill and prevent the release of contaminants into the surrounding environment. The compacted soil used as a cover is typically selected for its low permeability, which helps to reduce the amount of water that can penetrate through the cover and come into contact with the waste materials in the landfill. This helps to prevent leachate, which is the liquid that is generated from the decomposition of waste, from seeping out of the landfill and contaminating nearby soil and groundwater.
Learn more about landfill here:
https://brainly.com/question/9085477
#SPJ11
Who was the first person to suggest that the Earth orbited the sun?
The ancient Greek astronomer Aristarchus of Samos was the first person to suggest that the Earth orbited the sun, around 250 BCE.
Aristarchus of Samos was an ancient Greek astronomer and mathematician who lived from 310 BCE to 230 BCE. He was the first person to suggest that the Earth orbited the sun, rather than the other way around, as was commonly believed at the time. Aristarchus made this suggestion based on observations of the positions of the stars and planets, and his belief that the sun was much larger than the Earth, which made it more plausible that the Earth would orbit the sun rather than the other way around. Despite his groundbreaking theory, it was not widely accepted until much later, with the work of Nicolaus Copernicus in the 16th century.
Learn more about Greek astronomer here:
https://brainly.com/question/30283982
#SPJ11
The same current flows through each of the wires sketched at right. For which case is the magnetic field at point O the largest? (All segments are circular or straight. Radii are d or d/2. When wires point off along straight lines, they continue to infinite distance.)
The magnetic field at point O depends on the direction of the current in each wire and their distance from point O. The magnetic field due to a straight wire is given by B=μI 2πr where r is the distance from the wire and μ is the permeability of free space.
The magnetic field at point O will be the largest for the wire configuration where all the wires are straight and parallel, and the distance between them is equal to the radius of the wires (d/2). In this case, the magnetic field lines generated by each wire will be aligned and will add up, resulting in a stronger magnetic field at point O. The other configurations with curved wires or wires of different radii will result in a less uniform magnetic field, and therefore a smaller overall magnetic field at point O. However, it should be noted that the magnetic field generated by an infinite straight wire is theoretically infinite, so in reality, the magnetic field at point O will continue to increase as the straight wires extend to infinite distance.
learn more about magnetic here
https://brainly.com/question/28207558
#SPJ11
A train car, which has a mass of 2500 kg, is rolling along with a speed of 14 m/s. It strikes a stationary (not moving) train car, which also has a mass of 2500 kg, and they stick together. What is their combined speed after the collision?
Answer:
7m/s
Explanation:
The formula for inelastic collisions is m1*v1 + m2*v2 = (m1+m2)*vf. From this question, we are given m1 = 2500kg, v1 = 14m/s, m2 = 2500 kg, v2 = 0 m/s. Plugging all this into the above equation gets 2500 * 14 = 5000 * vf. Solving that gets vf = 7m/s.
Answer:
v = 7 m/s
Explanation:
Momentum of the first train car before = mass of the first train car x velocity of the first train car
= 2500 kg x 14 m/s
= 35000 kg·m/s
Momentum of the second train car before = mass of the second train car x velocity of the second train car
= 2500 kg x 0 m/s
= 0 kg·m/s
Total momentum before = Momentum of the first train car before + Momentum of the second train car before
= 35000 kg·m/s + 0 kg·m/s
= 35000 kg·m/s
Total mass after = mass of the first train car + mass of the second train car
= 2500 kg + 2500 kg
= 5000 kg
Total momentum before = Total momentum after
35000 kg·m/s = 5000 kg x v
v = 35000 kg·m/s / 5000 kg
v = 7 m/s
a binary system that is detected from the drop in luminosity as one star passes in front of the other is called
A binary system that is detected from the drop in luminosity as one star passes in front of the other is called an eclipsing binary.
An eclipsing binary is a type of binary star system consisting of two stars that orbit around their common center of mass. From the perspective of an observer on Earth, the two stars periodically eclipse each other as they move in front of one another during their orbits. This causes the combined brightness of the system to fluctuate, with the light curve showing a regular pattern of dips in brightness as the stars eclipse each other.
Eclipsing binaries are important astronomical objects because they allow us to measure the physical properties of stars more accurately than would be possible for a single star. By studying the properties of the eclipses, such as their duration and depth, astronomers can determine the sizes, masses, and temperatures of the stars in the system. This information can provide important insights into the evolution of stars and the structure of our galaxy.
To learn more about Eclipsing binary visit here:
brainly.com/question/30885388
#SPJ4
A ray of light is travels through air (n = 1.00) and into a Lucite block. Its velocity slows to 2.14 x 10^8 m/s. What is the index of refraction for Lucite?
A ray of light is travels through air (n = 1.00) and into a Lucite block. Its velocity slows to 2.14 x 10⁸ m/s. The index of refraction for Lucite is 1.40.
What is index of refraction?An optical media's refractive index, also known as refraction index, is a dimensionless number that indicates how well the medium bends light.With wavelength, the refractive index may change. When refracted, this allows white light to separate into its component hues. It's known as dispersion. In prisms, rainbows, and as chromatic aberration in lenses, this phenomenon can be seen. A refractive index with a complex value can be used to describe how light moves through absorbent materials. The attenuation is then taken care of by the imaginary part, while refraction is handled by the real part. For the majority of materials, the refractive index varies by several percent with wavelength over the visible spectrum.
The index of refraction for Lucite can be calculated by using the equation,
n = [tex]\frac{c}{v}[/tex], where c is the speed of light in a vacuum and v is the speed of light though Lucite.
So, in this case,
n =[tex]\frac{3 * 10^8}{2.14*10^8}[/tex] = 1.40
To know more about chromatic aberration, visit:
https://brainly.com/question/7550245
#SPJ1
which technology can allow a single ground-based telescope to achieve images as sharp as those from the hubble space telescope? which technology can allow a single ground-based telescope to achieve images as sharp as those from the hubble space telescope? adaptive optics grazing incidence interferometry
The technology that can allow a single ground-based telescope to achieve images as sharp as those from the Hubble Space Telescope is adaptive optics.
Adaptive optics use deformable mirrors to correct for atmospheric distortion, which causes the "twinkling" of stars and blurs images. This technology allows ground-based telescopes to achieve resolutions as good as those of space-based telescopes like Hubble. Other technologies that can also improve ground-based telescope resolution include grazing incidence and interferometry.
Adaptive optics is the technology that allows a single ground-based telescope to achieve images as sharp as those from the Hubble Space Telescope. This technology compensates for the distortion caused by Earth's atmosphere, resulting in clearer and sharper images.
An adaptive optics system's brain is a deformable mirror, which may change shape hundreds or thousands of times per second to instantly correct aberrations caused by atmospheric turbulence.
Since the primary mirrors of ground-based telescopes are frequently enormous and cannot be moved rapidly (even segmented mirrors are massive), the deformable mirror is a separate component placed after the light has already been reflected from the primary mirror.
Learn more about adaptive optics here
https://brainly.com/question/29751399
#SPJ11
for the image below, the focal length is 1/2 of the radius of curvature, object distance is 247 cm. the size of the object is 46 cm. what is the image size equal to in cm? remember that it could be positive or negative.
The image of the object is 12.4 cm.
Using the given values, we can use the lens formula: 1/f = 1/[tex]d_{0}[/tex] + 1/[tex]d_{i}[/tex], where f is the focal length, [tex]d_{0}[/tex] is the object distance, and di is the image distance. Rearranging the formula to solve for di, we get: [tex]d_{i}[/tex]= 1/(1/f - 1/[tex]d_{0}[/tex]).
Substituting the given values, we get:
[tex]d_{i}[/tex] = 1/(1/(2r) - 1/247)
[tex]d_{i}[/tex] = -65.34 cm (negative sign indicates that the image is formed on the opposite side of the lens)
To find the image size, we can use the magnification
formula: m = [tex]h_{i}[/tex]/[tex]h_{0}[/tex] = -[tex]d_{i}[/tex]/[tex]d_{0}[/tex], where [tex]h_{i}[/tex] is the image size and [tex]h_{0}[/tex]is the object size.
Substituting the given values, we get:
m = [tex]h_{i}[/tex]/[tex]h_{0}[/tex] = -(-65.34)/247
m = 0.264
Rearranging the formula to solve for hi, we get:
[tex]h_{i}[/tex]= m * [tex]h_{0}[/tex]
[tex]h_{i}[/tex] = 0.264 * 46 cm
[tex]h_{i}[/tex] = 12.14 cm
Therefore, the image size is equal to 12.14 cm (rounded to two decimal places).
Learn more about image
here: https://brainly.com/question/25029470
#SPJ11
i need answer for this now!!!
Based on the information, the storm is 1320 meters away from Adami.
How to calculate the valuea. To calculate the distance to the storm, Adami can use the formula distance = speed × time. The time delay between seeing the lightning and hearing the thunder is 4 seconds. The speed of sound in air is 330 m/s. Therefore, the distance to the storm can be calculated as follows:
distance = speed × time
distance = 330 m/s × 4 s
distance = 1320 m
So, the storm is 1320 meters away from Adami.
b. Adami has assumed that the speed of sound in air is constant at 330 m/s. However, the speed of sound can vary depending on the temperature, humidity, and pressure of the air. So, the distance calculated by Adami may not be accurate if the conditions are not ideal.
Learn more about distance on;
https://brainly.com/question/26550516
#SPJ1
Question 42
Lime coagulation, mixed media filtration, and activated carbon filtration will greatly reduce
a. Heavy metals
b. Biological contaminants
c. EPA priority pollutants
d. EPA listed hazardous waster
b. Biological contaminants. Lime coagulation can help remove suspended particles and organic matter, mixed media filtration can remove finer particles and microorganisms, and activated carbon filtration can remove chlorine, taste, and odor compounds.
While these processes may also help reduce other contaminants to some extent, their primary function is to target and remove biological contaminants.
Lime coagulation, mixed media filtration, and activated carbon filtration will greatly reduce b. Biological contaminants. These methods are effective in removing microorganisms, organic matter, and improving water quality.
Visit here to learn more about contaminants brainly.com/question/29851759
#SPJ11