What is the equation to find the equivalent resistance, Req, of two resistors in series, R1 and R2?Group of answer choicesA) Req = R1 + R2B) Req = 1/R1 + 1/R2C) R1 = R2D)Req = 2R

All of the statements listed are correct based on what we have learned about light production in stars.

a) Heat flows from hot to cool regions. This is a fundamental law of thermodynamics that governs heat transfer and is applicable to all objects, including stars.

b) Hotter stars radiate more energy at higher frequencies. This is known as Wien's law, which states that the wavelength of maximum radiation emitted by a blackbody is inversely proportional to its temperature.

c) The temperature of a star can be roughly estimated from its color. This is based on the fact that the peak wavelength of light emitted by a blackbody is related to its temperature, and the color of a star is a reflection of the wavelengths of light it emits.

d) Stars emit light mostly from their surfaces. This is due to the fact that the outer layers of a star are less dense and cooler than the core, which allows light to escape more easily from the surface.

Learn more about Light production here:
https://brainly.com/question/30789760
#SPJ1

The value that completes the box plot distribution of wind speed statement is 48 km/h.

To determine the value that completes the statement, locate the median, which represents the 50th percentile. From the plot, the median (50th percentile) is at approximately 42 km/h.

The box extends from the first quartile (25th percentile) to the third quartile (75th percentile), so determine the range of speeds that contains 50% of the measurements by finding the difference between the median and the first quartile, and then adding it to the median.

The plot estimates that the difference between the median and the first quartile is approximately 6 km/h. Therefore, 50% of the speeds are between 36 km/h and (42 + 6) km/h, which simplifies to 36 km/h and 48 km/h.

So the value that completes the statement is 48 km/h.

Learn more on box plots here: https://brainly.com/question/14277132

#SPJ1

In induction, an object gives another object an opposite charge without losing any of its own charge. Correct option is A.

The charge of a charged particle or substance can be positive or negative. Naturally, charges with the opposite polarity attract and those with the same polarity repel. When something is charged, it either has a net positive charge or a net negative charge.

When the right circumstances are present, induction occurs and another object receives a net charge. Bringing a charged object up close to an uncharged object is the easiest way to make it happen. The originally neutral object now has a charge that is separated by an electrostatic force. There is no requirement for interaction.

So, the correct option is A.

To know more about induction:

https://brainly.com/question/12257842

#SPJ4

The image will be located 5 cm to the right of the lens, 5 cm to the left of the object. The image will be inverted, magnified, and real, and it will be 10 cm tall.

Image is a visual representation of a physical object, person, scene, or text. It can be a two-dimensional picture such as a photograph or a drawing, or a three-dimensional picture such as a sculpture or a hologram. Images can also be digital, such as a JPEG file or a GIF file. Images can be used to express emotions, convey information, or capture a moment in time. They can be used for entertainment, education, or advertisement. Images can be found in all forms of media, including newspapers, magazines, books, television, movies, and the internet. Images can also be used to create a mood or atmosphere, or to tell a story.

To know more about Image
https://brainly.com/question/29791417
#SPJ1

Fluted filter paper is often used in gravity filtration because it allows for faster filtration rates and greater particle retention than regular flat filter paper.

The fluted shape of the paper creates channels or grooves that increase the surface area and provide more space for the filtered material to flow through. This design also prevents the filter paper from clogging, allowing air to escape and helps to maintain a steady flow of liquid through the filter.

Gravity filtration is a common laboratory technique used to separate a solid from a liquid mixture by allowing the mixture to pass through a filter under the influence of gravity. The process relies on gravity to pull the liquid through the filter paper while leaving behind the solid particles.

To learn more about experiment, visit here:

https://brainly.com/question/30055326

#SPJ1

The answer is Hangers. The "hangers" connect the cables to the deck in order to pull on the cables, which transfer the pull on the towers and anchors.

Hangers also said as "Hooks" are metal elements used to attach cables to the bridge. Hooks are usually made of a metal, like stainless steel, and are attached to the deck with bolts or screws.

The cables are then passed through the lines which allow them to be taut and transmit power to the towers and the anchors. With the ropes, the cables can be stretched and securely connected to the deck. The hooks also help protect the cables from wear and tear on the caused by cable tension and movement.

Hangers are essential to any cable suspension bridge as they ensure that the cables are properly connected to the deck and can withstand the loads required for the bridge to operate safely.

To know more about Cables:

brainly.com/question/23087252

#SPJ4

The capacitance of the parallel plate capacitor is calculated as 35.4 nF.

Capacitor is a device for storing electrical energy and consisting of two conductors in close proximity and insulated from each other.

Capacitance of a parallel plate capacitor : C = ε₀A/d

ε₀ is permittivity of free space, A is area of the plates, and d is distance between them.

Given A = 6 m², d = 1.5 mm = 0.0015 m

V = 10 V

value of ε₀ is approximately 8.85 x 10⁻¹² F/m (farads per meter).

Using the formula for capacitance:

C = ε₀A/d = (8.85 x 10⁻¹² F/m)(6 m²)/(0.0015 m) = 35.4 x 10⁻⁹ F

Therefore, the capacitance of the parallel plate capacitor is 35.4 nF.

To know more about capacitor, refer

https://brainly.com/question/27393410

#SPJ1

The term for the electrical force that occurs when two charges have a difference in potential is electric potential difference, or voltage.

When there is a difference in electric potential between two points in an electric circuit, electric charges will flow from the point of higher potential to the point of lower potential, creating an electric current. Voltage is a measure of the energy required to move a unit of electric charge between two points in a circuit.

The unit of measurement for voltage is the volt (V), named after Italian physicist Alessandro Volta. One volt is defined as the electric potential difference between two points in a circuit when one joule of energy is used to move one coulomb of electric charge between those points.

To learn more about Voltage :

https://brainly.com/question/13521443

#SPJ4

Type 1 construction is defined as demanding that all structural members be made of noncombustible or minimally combustible materials with high fire-resistance ratings.

Construction of type 1 is also referred to as fire-resistant construction and is built to endure intense fire exposure. It primarily consists of noncombustible structural components consisting of concrete, steel, or masonry, which are commonly covered in fire-resistant materials like gypsum board, spray-on protective coatings, or fire-resistant insulation. The term combustible refers to any material that has the ability to burn or ignite when exposed to heat, flame, or other sources of ignition. Combustible materials include a wide range of substances, including wood, paper, plastics, gasoline, propane, and natural gas

High-rise constructions, hospitals, schools, as well as other facilities requiring a high level of fire protection frequently adopt type 1 construction.

To learn more about Combustible :

https://brainly.com/question/28996046

#SPJ4

Since, A monotonic gas is adiabatically compressed to 0.125 of its initial volume. Therefore, the rms speed of the system is 0.25 while Mean free path is 0.5 times the first mean free path.

a. The following temperature and volume relationship holds for the adiabatic process:

[tex]TV^{\alpha -1}[/tex] = constant

Therefore,

[tex]T_1V_1^{\alpha -1} = T_2V_2^{\alpha -1}[/tex]

This yields

[tex]\frac{T_2}{T_1} = (\frac{V_1}{V_2} )^{2}[/tex]

In the equation , it is given that V₁/V₂ = 0.125

So, V₁/V₂ = 1/0.125

The adiabatic exponent for monoatomic gases is 0.66. So,

   T₂/T₁ = (0.125)⁰⁶⁶⁻¹

⇒ T₂/T₁ = (0.125)⁰°⁶⁵

⇒ T₂/T₁ = 0.25

As a result, the temperature rises by a factor of ten in this procedure 0.25 .We know that V(rms) is proportional to √T. so we have

[tex]\frac{V_rms_1}{V_rms_2}[/tex] = [tex]\sqrt{\frac{T_2}{T_1} }[/tex] = √0.25 = 0.5

i.e. The rms speed increases by a factor of 0.5.

b. The mean free path is given by in the book

λ = [tex]\frac{V}{4\sqrt{2}\pi Nr^{2} }[/tex]

where

r is The effective radius of the molecule,

V is the volume of the gas and

N is the number of molecules.

All quantities in the λ formula except volume are constant in this process.

Since, λ ∞ ∨ decreases by a factor of 0.5, also decreases by a factor of 0.5.

C. A monoatomic gas's thermal energy is given by

[tex]E_th[/tex] = [tex]_nC_vT[/tex]

Both the number of moles  n , and ,

the molar specific heat at constant volume [tex]C_v[/tex] are constant in this process so the only thing that changes is the temperature.

Since [tex]E_th[/tex] ∞ T since we have found that the temperature increases by a factor of 0.25 then [tex]E_th[/tex] also increases by a factor of 0.25 .

d. The molar specific heat of a monoatomic gas is just a constant equal to [tex]C_v =[/tex] 0.5R.

So, it doesn't change in this process.

Therefore,

The rms speed of the system is 0.25 while Mean free path is 0.5 times the first mean free path.

Complete Question:

A monatomic gas is adiabatically compressed to 0.125 of its initial volume. Do each of the following quantities change?

A) What is rms speed?

B) What is the mean free path?

C) What is the thermal energy of gas?

D) What is the molar specific at a constant volume?

Learn more about Monotonic:

https://brainly.com/question/29732217

#SPJ4

The average density of white dwarf after sun exhausts its nuclear fuel is [tex]1.84 * 10^9 kg/m^3[/tex]

After sun exhausts its nuclear fuel, it will become a white dwarf and will have same mass and radius as Earth. White dwarf contains matter that is based on degenerated electrons, with high density, mass as much as sun, but volume like that of the sun. They have utilized entire Hydrogen reserves to convert into Nuclear fuel.

The average density of white dwarf = Vw = [tex]4/3 * \pi * w^3[/tex]

Let radius of white dwarf be Rw and radius of Earth be Re.

Density = Mass/Volume

Pw = MR/ ([tex]4/3 * \pi * Re^3[/tex])

Pw = [tex]1.99 * 10^(30)[/tex]/ ([tex]4/3 * \pi * (6.37 * 10^6)^3[/tex])

Pw = [tex]1.84 * 10^9 kg/m^3[/tex]

Therefore, density of White Dwarf equals to [tex]1.84 * 10^9 kg/m^3[/tex] as per scenario presented in question.

Learn more about nuclear fuel here:

https://brainly.com/question/3458668

#SPJ4

The property is called the rectilinear propagation of light

The rectilinear propagation of light refers to the fact that light travels in straight lines in a uniform medium, such as air or vacuum. This means that if a beam of light is not obstructed or refracted by a medium, it will continue to travel in a straight line.

This property of light was first described by the ancient Greeks, and it is a fundamental principle of geometric optics. The rectilinear propagation of light allows us to use simple geometrical methods, such as ray tracing, to predict how light will behave when it interacts with lenses, mirrors, and other optical devices.

Learn more about light:https://brainly.com/question/15200315

#SPJ1

Both Galileo and Johannes Kepler contributed to find the features of solar systems. It was Kepler who first discovered the solar centric system and revolution of planets around.

Galileo used logical reasoning to confront the issues with the Earth's rotation and revolution. Despite their great speed, bodies do not fly off the Earth since the planet is not actually rotating quickly.

Any object on Earth is moving very slowly in terms of rotations per minute and has little tendency to take off into space. Galileo came to the conclusion that once the planets are in motion in circles, they stay in motion forever.

Copernican orbits are thus real. Galileo never acknowledged Kepler's ellipses since doing so would have required him to give up on his Copernican issue solution.

Find more on Keppler's theory:

https://brainly.com/question/1620025

#SPJ1

a. The y component of the normal force is [tex]F_N(y) = F_N \times sin(\theta)[/tex]

b. The x component of the normal force is    [tex]F_N(x) = F_N \times cos(\theta)[/tex]

c. The magnitude of the normal force written in terms of the force of gravity, Fg, and the angle θ is FN = Fg / cos(θ)

d. The magnitude of the normal force written in terms of the gravitational force, Fg, acceleration due to gravity, g, the radius of the track, r, and the velocity that the car is traveling, v is FN = (Fg / g) × √((v^2)/(r^2) + 1)

e. The angle θ is approximately 30 degrees

From the question, we are to determine y component and the x component of the normal force

a) The y component of the normal force, FN, is given by:

[tex]F_N(y) = F_N \times sin(\theta)[/tex]

where θ is the angle at which the track is banked.

b) The x component of the normal force, FN, is given by:

[tex]F_N(x) = F_N \times cos(\theta)[/tex]

where θ is the angle at which the track is banked.

c) The magnitude of the normal force, FN, can be written in terms of the force of gravity, Fg, and the angle θ as:

FN = Fg / cos(θ)

d) The magnitude of the normal force, FN, can also be written in terms of the gravitational force, Fg, acceleration due to gravity, g, the radius of the track, r, and the velocity that the car is traveling, v, as:

FN = (Fg / g) × √((v^2)/(r^2) + 1)

e) Given that the car is moving at 15 m/s and the radius of the track is 130 m, we can use the equation from part (d) to solve for the angle θ:

FN = (Fg / g) × √((v^2)/(r^2) + 1)

FN = (mg / g) × √((v^2)/(r^2) + 1)

FN = mg × √((v^2)/(r^2) + 1)

FN = (m × g) × √((15^2)/(130^2) + 1)

Where m is the mass of the car, and g is the acceleration due to gravity.

Assuming a typical mass for a race car of 1000 kg, we can calculate the angle θ as follows:

FN = (1000 kg * 9.81 m/s^2) * sqrt((15^2)/(130^2) + 1)

FN = 9644.4 N

Using the equation from part (c), we can solve for the angle θ:

FN = Fg / cos(θ)

cos(θ) = Fg / FN

cos(θ) = mg / FN

θ = cos⁻¹(mg / FN)

Plugging in the values, we get:

θ = cos⁻¹((1000 kg * 9.81 m/s^2) / 9644.4 N)

θ = 30.0 degrees

Therefore, the angle θ is approximately 30 degrees

Learn more on Determining the x and y components of the normal force here: https://brainly.com/question/29004763

#SPJ1

The skaters' momentum is equal but in the opposite direction if they push apart from one another. From the given option, option B is correct.

The momentum is given by the expression p = m×v. Here, the mass is denoted by m and velocity by v. By Newton's third law of motion, when there is a collision between two objects, they both experience force. And this force is equal in terms of magnitude. But opposite in terms of direction.

So one object will gain momentum while the other object loses momentum. In the given situation, the third law of motion comes into action. Therefore, the momentum between the two skaters will be equal but they are in opposite directions. The correct statement is option B.

To know more about momentum:

https://brainly.com/question/29598011

#SPJ4

The complete question is -

Two skaters stand facing each other. One skater’s mass is 60 kg, and the other’s mass is 72 kg. If the skaters push away from each other without spinning,

A. the 60kg skater travels at a lower momentum.

B. their momentum is equal but opposite.

C. their total momentum doubles

D. their total momentum decreases.

To convert from kilonewtons (kN) to newtons (N), you need to multiply the value in kilonewtons by 1000.

This is be Newtons (N) is a unit of measurement for force in the International System of Units (SI). It is named after Sir Isaac Newton, the English physicist and mathematician who made significant contributions to our understanding of physics and mechanics.

One newton is defined as the force required to accelerate a mass of one kilogram at a rate of one meter per second squared. In other words, it is the amount of force needed to cause a mass of one kilogram to accelerate at a rate of one meter per second squared.cause "kilo" means thousand, so 1 kilonewton is equal to 1000 newtons. Therefore, to convert kN to N, you can use the following formula:

1 kN = 1000 N

To convert a specific value, simply multiply the value in kN by 1000. For example, if you have a force of 5 kN, you can convert it to newtons by multiplying 5 by 1000, which gives you 5000 N.

To know more about kilonewtons here

https://brainly.com/question/13747143

#SPJ4

Approximately 2.2 g of iodine-135 would remain after 19.8 hours at the given half life.

To solve this problem, we can use the formula for radioactive decay:

N = N0 * (1/2)^(t/T)

Where;

We are given that the initial amount of iodine-135 is 11.2 g, the half-life is 6.6 hours, and the elapsed time is 19.8 hours.

Using the formula, we can find the amount of iodine-135 remaining after 19.8 hours:

N = 11.2 * (1/2)^(19.8/6.6)

N ≈ 2.2 g

Learn more about half life here: https://brainly.com/question/2320811

#SPJ1

The electron transport chain and oxidative phosphorylation are closely related but are not the same process.

The electron transport chain and oxidative phosphorylation are two separate processes that occur during cellular respiration. The electron transport chain involves a series of electron carriers that transfer electrons from NADH and FADH2 to oxygen, creating a proton gradient across the mitochondrial inner membrane.

Oxidative phosphorylation, on the other hand, is the process by which ATP is synthesized using the energy from the proton gradient created by the electron transport chain.

While the electron transport chain and oxidative phosphorylation are closely related and dependent on each other, they are distinct processes that occur in different locations within the mitochondria. The electron transport chain occurs in the inner mitochondrial membrane, while oxidative phosphorylation occurs in the mitochondrial matrix.

To know more about electron transport chain, here

brainly.com/question/24372542

#SPJ4

The second law of thermodynamics is a fundamental principle in physics that relates to the direction of energy transfer in a system. In general, the second law states that the total entropy of a closed system cannot decrease over time.

Energy is a fundamental concept in physics that refers to the ability of a system to do work.

In simpler terms, the second law of thermodynamics implies that energy spontaneously flows from regions of higher concentration to regions of lower concentration and that this flow will result in an overall increase in the system's entropy or disorder. This is often described as the "arrow of time," as it explains why time seems to only move forward, and not backward.

The second law also implies that energy cannot be completely converted from one form to another without some energy being lost to the environment, due to the fact that some energy is always converted to heat and dispersed into the surroundings. This is known as the law of energy conservation or the principle of energy degradation.

Learn more about the laws of thermodynamics here:

https://brainly.com/question/3808473
#SPJ1

Mass is an extensive physical property because it is dependent on the amount or quantity of matter present in a system.

Mass is a measure of the total amount of matter that is present in an object or substance, and it is directly proportional to the number of atoms or molecules that make up that object or substance.

Intensive properties, on the other hand, do not depend on the amount of matter present in a system. Examples of intensive properties include temperature, density, and specific heat. These properties remain constant regardless of the size or quantity of the sample.

In contrast, if you combine two objects, the total mass will be equal to the sum of the individual masses of the objects. This is what makes mass an extensive property. The more mass there is in a system, the more extensive the property becomes.

Therefore, mass is an essential parameter for describing many physical phenomena, such as momentum, energy, and force. It is an essential factor in the laws of physics, and it plays a crucial role in determining the behavior of objects in motion.

Learn more about mass here:

https://brainly.com/question/12617216

#SPJ4

96 kg is equal to 211.6 lbs.

The fundamental mass unit in the metric system is the kilogramme (kg). A kilogramme and 1,000 cubic centimetres of water have fairly similar masses.

One pound is approximately equal to 454 grams. One kilogram is the same as 2.20462 lbs.

1 pound is equal to 0.45359237 kilograms.

To convert kilograms (kg) to pounds (lbs), you can use the following formula:

To convert kilograms to pounds, multiply your figure by 2.20462

To convert 96 kg to lbs, you can multiply 96 by 2.20462:

96 kg X 2.20462 lbs/kg

= 211.64472 lbs

Therefore, 96 kg is approximately equal to 211.6 lbs.

For similar question on converting kilograms to pounds,

https://brainly.com/question/30403472

#SPJ4

The amount of strength that is applied to the rope in a pulley to raise the object is called tension.

Basically use a rope to pull an object by the means of pulley system.

When we raise an object to a certain height a strength forces developed in the rope that is called tension in the rope.

We use the pulley and rope system in order to distribute the weight of an object evenly on all the pulleys in the system.

When lifted directly vertically the tension in the string is equal to the weight of the object that it is lifting.

To know more about tension, visit,

https://brainly.com/question/2008782

#SPJ4

Chemistry is referred to as the central science because it intersects with and connects other natural sciences.

Chemistry is referred to as the central science because it connects and bridges many different scientific fields. It forms the foundation of many other sciences, including physics, biology, geology, materials science, and engineering.

Understanding chemistry is essential for understanding the behavior and properties of matter and the interactions between different substances, as well as for developing new materials, medicines, and technologies. Chemistry also plays a critical role in solving many of the world's biggest challenges, such as climate change, energy production and storage, and sustainable development.

To know more about the chemistry, here

brainly.com/question/13428382

#SPJ4

--The complete question is, Why is chemistry referred to as the central science?--

From radio wave to gamma ray, the electromagnetic waves are grouped as Radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays on the basis of frequencies present in the electromagnetic spectrum.

The electromagnetic spectrum is a frequency system that indicates the wavelengths and intensities of electromagnetic radiation.

It is a frequency representation of photon energies, wavelengths, and electromagnetic radiation.

the colours violet, indigo, blue, green, yellow, orange, and red of the electromagnetic spectrum.

In order to make sense of how electromagnetic waves are organised from radio waves to gamma rays,

Examples of frequencies present in the electromagnetic spectrum include radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma rays.

To know more about EM waves, visit,

https://brainly.com/question/25847009

#SPJ4

Yes, an impulse is defined as the change in momentum of an object. When an external force is applied to an object for a period of time, the object's momentum changes.

The impulse is equal to the change in momentum, and it is equal to the force multiplied by the time over which the force was applied. Mathematically, the impulse is given by the formula:

Impulse = Force x Time

And the momentum of an object is given by the formula:

Momentum = Mass x Velocity

So, if a force is applied to an object for a time period and the object's velocity changes as a result, then the impulse experienced by the object is equal to the change in momentum. This can be expressed as:

Impulse = Final Momentum - Initial Momentum

where the final momentum is the momentum of the object after the force is applied, and the initial momentum is the momentum of the object before the force is applied.

To know more about impulse here

https://brainly.com/question/29787317

#SPJ4

Answer:

Explanation:

We can use the formula for average velocity to calculate the student's velocity during the second time interval:

Average velocity = (final position - initial position) / time

During the first time interval, the student moved a distance of 4.0 m in 2.0 seconds, so her average velocity during that time was:

Velocity = 4.0 m / 2.0 s = 2.0 m/s

During the second time interval, the student moved a distance of 1.0 m, and the total time she moved was 4.0 seconds. Therefore, the time for the second interval was:

Time = Total time - First time interval = 4.0 s - 2.0 s = 2.0 s

We can now use the formula for average velocity again to calculate the student's velocity during the second time interval:

Average velocity = (final position - initial position) / time

Velocity = 1.0 m / 2.0 s = 0.5 m/s

Therefore, the student's velocity during the second time interval was 0.5 m/s.

600 kilograms is equal to 1322.4 pounds.

While measuring weight, various units like kilograms (kg) and pounds (lbs) are some commonly used units of measurement of weights. In order to understand and do all the conversion of kilograms to pounds, it is very important to know that there are 2.20462 pounds which makes up one kilogram.

Formula used:

lbs = Kg x 2.204

lbs= 600 x 2.204

So, to convert 600 kilograms to pounds, there is a requirement of  multiplying 600 to 2.20462. When this calculation is done, we obtain 1322.4 pounds.

In summary, to need to convert kilograms to pounds and thereafter, we simply need to multiply the number of kilograms by numerical value of 2.20462. 600 kg is equal to 881.848 pounds. 200 kg is equal to 440.924 pounds and consequently 300 kg is equal to 661.386 pounds.

Learn more about kgs to lbs refer here:

brainly.com/question/24545553#

#SPJ4

Kilowatt hours are a unit of measurement for the energy required to heat a house. It is the amount of energy used every hour. Hence option B.

Power is a tangible measure of how much work or energy is expended in a certain amount of time. Therefore, power is the rate at which an object expends energy or performs work. Watt is the definition of power. The joule is a unit of both work and energy.

Kilowatts are the unit of measurement for power for higher energy usage. Power input and time are the components of work or energy.

W in J hence equals power in Watt/time in hours.

Kilowatts hours are the unit used to measure domestic energy use. Hence, option B is our answer.

To know more about electrical energy. visit,

https://brainly.com/question/60890

#SPJ4

Initial speed of the mug was approximately 3.34 m/s, which is option E. We use conservation of energy.

To solve this problem, we can use the conservation of energy principle to relate the initial speed of the mug to its final position after sliding off the counter.

When the mug slides off the counter, it has some potential energy due to its height above the base of the counter, and some kinetic energy due to its motion. When it lands on the floor, it has lost all of its potential energy but gained some additional kinetic energy due to the work done by gravity.

Let's assume that there is negligible air resistance during the motion of the mug. Then we can use the conservation of energy principle to write:

[tex]mgh + (1/2)mv^2 = (1/2)mv_f^2[/tex]

where m : mass of the mug, g : acceleration due to gravity, h : height of counter, v : initial speed of mug, and v_f : final speed of mug before landing on floor

Since the mug slides off the counter horizontally, it has constant horizontal velocity throughout motion. We use the horizontal distance traveled by the mug to find time of flight:

d = v_f t

d : horizontal distance traveled, and t: time of flight.

Utilize time of flight to calculate final speed of mug before landing:

[tex]h = (1/2) g t^2 = > t = sqrt((2h)/g)v_f = d / t = (d / sqrt((2h)/g))[/tex]

Substitute v_f into conservation of energy eqn and find v:

[tex]mgh + (1/2)mv^2 = (1/2)mv_f^2mgh + (1/2)mv^2 = (1/2)md^2 / t^2[/tex]

Substituting values:

[tex]mgh + (1/2)mv^2 = (1/2)md^2 g / (2h)[/tex]

Simplifying and solving for v, we get:

[tex]v = sqrt((2gh)/3) * sqrt(1 + 2d^2/(3h^2))[/tex]

Put values:

v = [tex]\sqrt{ ((2 * 9.81 m/s^2 * 0.86 m)/3)} * \sqrt{(1 + 2 * (1.4 m)^2 / (3 * (0.86 m)^2))}[/tex]

v ≈ 3.34 m/s

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ4

In physics, momentum is defined as the product of an object's mass and velocity. It is a vector quantity that describes the motion of an object and its resistance to a change in motion.

The SI unit of momentum is kilogram-meter per second (kg·m/s). and Mathematically, momentum (p) can be expressed as: p = m * v where m is the mass of the object and v is its velocity.

Momentum is conserved in a closed system, meaning that the total momentum of the system remains constant unless acted upon by an external force.  This principle is known as the law of conservation of momentum and is commonly used in the study of collisions and other types of interactions between objects.

Momentum conservation is a fundamental principle in physics that states that the total momentum of a closed system remains constant unless acted upon by an external force. This principle is derived from Newton's laws of motion and is an important concept in the study of mechanics.

To know more about momentum here

https://brainly.com/question/18798405

#SPJ4