Which mineral reacts readily with cool, dilute hydrochloric acid to produce visible bubbles of carbon dioxide gas?.

Answer:

b atoms

Explanation:

everything is made up of atoms

A reagent is a compound that is used for the detection of the absence or presence of another substance.

Your information is incomplete as the available reagents aren't given. Therefore, an overview will be given.

Reagents are the integral part of a chemical reaction as they facilitate a reaction. A reagent is usually used tests.

Some typical examples of reagents include Tollens reagent, Fehling's reagent, Million's reagent, etc.

Learn more about reagents on:

https://brainly.com/question/5601219

The reagents that would be used to convert cyclohexanone to the following compound: hydrogen cyanide, potassium cyanide, and H₃O⁺, heat.

It is an organic compound with a chemical formula [tex]\rm (CH_2)_5 CO[/tex].

The cyclohexanone is used as Insecticides, paint and varnish remover, synthetic resins, etc.

It is not harmful to humans and animals, inhalation cause irritation.

Thus, the compound: hydrogen cyanide, potassium cyanide, and H₃O⁺, heat.

Learn more about cyclohexane

https://brainly.com/question/15593706

#SPJ4

The pH of a 0.50M solution of malic acid with ka1 = 4. 0 × 10-⁴ and ka2 = 6. 3 × 10-⁶ as described is; 1.85.

Since, in a polyprotic acid the first hydrogen will dissociate faster than the others, If the Ka values differ by a factor of 10-³ or more, it is possible to approximately calculate the pH by using only the Ka of the first hydrogen ion.

However, the situation is different in this scenario.

On this note, the solution is as in the attached image.

Read more on Diprotic acids;

https://brainly.com/question/26015203

The pH of a 0.50 m solution of malic acid is 1.85.

pH is potential hydrogen. It is the measurement of the acidity and basicity of any solution.

The ka1 = 4. 0 × 10⁻⁴

The  ka2 = 6. 3 × 10⁻⁶

The solution is 0.50 m.

First calculate the ka value

[tex]ka = \dfrac{x^2}{0.50} \\\\x^2 = 0.50 \times 4 \times 10^-^4\\\\x^2 = 2 \times 10^-^4\\x^2 = \sqrt{2 \times 10^-^4} \\\\ x = [H^+] = 1.41 \times 10^-^2[/tex]

Now, calculate the pH

[tex]pH = -log [H^+]\\\\pH = -log[ 1.41 \times 10^-2]\\\\pH = 1.85[/tex]

Thus, the pH of a 0.50 m solution of malic acid is 1.85.

Learn more about pH

https://brainly.com/question/15289741

#SPJ4

Answer:

The reaction between zinc sulphide and oxygen gives zinc oxide and sulfur dioxide. The chemical equation of the reaction is: 2ZnS + 3O2 → 2ZnO + 2SO2 2 moles of ZnS react with 3 moles of O2 to form 2 moles of ZnO and 2 moles of SO2

Explanation:

Answer:

a grassy meadow

Explanation:

goo

duh

Since an acidic salt solution is produced when a strong acid neutralizes a weak base, the pH of the salt solution formed when HCl is added to R2NH will be less than 7.

A neutralization reaction is the react ion between an acid and a base to form salt and water only.

Neutralization reactions can either produce a neutral solution, an acidic solution or an alkaline solution at equivalence point.

When a strong acid is added to a weak base, the pH of the salt solution formed will be less than 7.

Therefore, the pH of the salt solution formed when HCl is added to R2NH will be less than 7.

Learn more about pH at: https://brainly.com/question/940314

The coefficients which correctly balance the formula for the equation of reaction of NH₄ and NO₂ is 1,1,1,2.

This is the type of reaction in which the atoms of the elements of the reactants equal that of the product.

The balanced reaction is seen below where 2 was added to H₂O so as to balance the atoms of oxygen on both sides.

NH₄ + NO₂ (s) ⇒ N₂ (g)+2H₂O(l)

Read more about Balanced Chemical reaction here https://brainly.com/question/15355912

The atoms of hydrogen in the products is 2.4 * 10^21  atoms of hydrogen

The term decomposition has to do with a type of reaction in which a substance is broken down into into its components.

The decomposition of ammonium chloride occurs as follows;

NH4Cl → NH3 + HCl

If 6.02 * 10^23 hydrogen atoms are present in  6.02 * 10^23  molecules

x hydrogen atoms are present in 2.4 * 10^21 molecules

x = 2.4 * 10^21  atoms of hydrogen

Learn ore about decomposition:https://brainly.com/question/8009068

#SPJ2

Answer:

The aspirin is more soluble in ethanol than water - the water helps the crystals separate from solution.

Explanation:

Hope this helps!

The correct location of the given object on represents continental drift or seafloor spreading.

The scientist Alfred Wegener is most closely connected with the concept of continental drift. Wegener wrote a paper outlining his notion that the continents were “drifting” across the Earth, occasionally crashing through oceans and into one another, in the early 20th century.

The seafloor spreading is the increase of seawater covering the land area. The spreading of seawater is decreasing the land area.

Thus, the correct location is:

To learn more about continental drift, refer to the below link:

https://brainly.com/question/15122129

#SPJ6

The chemical elements and compounds that are present in a grocery item such as mayonnaise include:

A product label can be defined as a paper document which contains information about the nutrients, chemical elements, and other compounds that are present in a product such as a battery, food or an edible material.

This ultimately implies that, a product label is a paper document which is used by manufactures to specify the nutrients, chemical elements, and other compounds that were used to make a particular product.

Read more on product label here: https://brainly.com/question/14446515

Considering the Dalton's partial pressure, the partial pressure of CO₂ is 2.465 atm and the partial pressure of H₂O is 0.035 atm.

The pressure exerted by a particular gas in a mixture is known as its partial pressure.

So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:

[tex]P_{T} =P_{1} +P_{2} +...+P_{n}[/tex]

where n is the amount of gases in the mixture.

Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A} =x_{A} P_{T}[/tex]

In this case, you know:

Then:

Replacing in the Dalton's law:

[tex]P_{CO_{2} } =x_{CO_{2}} P_{T}[/tex]

[tex]P_{CO_{2} } =[/tex] 0.986× 2.50 atm

[tex]P_{CO_{2} } =[/tex] 2.465 atm

[tex]P_{H_{2}O } =x_{H_{2}O} P_{T}[/tex]

[tex]P_{H_{2}O } =[/tex] 0.014× 2.50 atm

[tex]P_{H_{2}O } =[/tex] 0.035 atm

Finally, the partial pressure of CO₂ is 2.465 atm and the partial pressure of H₂O is 0.035 atm.

Learn more about Dalton's partial pressure:

brainly.com/question/25181467

brainly.com/question/14119417

For the ionization constant for acetic acid is 1.8 x 10-5; that for hydrocyanic acid is 4 x 10-10, The solution is basic due to the generation of OH– ions.

ionization constant is simply defined as a constant that relies on the equilibrium that exists b/w ions and molecules of solution.

Generally, the equation for the Chemical reaction  is mathematically given as

CH3C.O .O + H2_O ----> CH3COOH + O.H

Therefore

the anion C...N–  receives H+ ion from water as it goes through hydrolysis.

Hence

xN– + H2..O ----><---- HxN + O..H–

In conclusion, The solution is basic due to the generation of OH– ions.

Read more about Chemical reaction

https://brainly.com/question/16416932

1)

methyl

CH3 (mol)

CH3- (struc)

2)

ethyl

C2H5

CH3-CH2-

3)

propyl

C3H7

CH3-CH2-CH2-

4)

butyl

C4H9

CH3-CH2-CH2-CH2-

5)

pentyl

C5H11

CH3-CH2-CH2-CH2-CH2-

6)

hexyl

C6H13

CH3-CH2-CH2-CH2-CH2-CH2-

7)

heptyl

C7H15

CH3-CH2-CH2-CH2-CH2-CH2-CH2-

8)

octyl

C8H17

i will stop writing the condensed formula ust add another CH2

9)

nonyl

C9H19

10)

decyl

C10H21

11)

Undecyl

C11H23

12)

dodecyl

C12H25

6 important factors that affect evaporation are : 1. Wind assists evaporation; for example in clothes dry faster under a fan. 2. Heat assists evaporation; for example, in summer clothes dry faster than in winter.

Now have a free meme

Answer:

The links are: the number of circles in the electronic configuration of an element is represented in the periodic table as the period number that element is situated in. the number of electrons in the outermost shell of an element is represented in the periodic table as the group number that element is situated in.

Explanation:

Answer:

The closest noble gas to silicon is Neon (Ne)

Explanation:

Electron configuration is the distribution of the electrons in atomic and molecular orbitals. The electron configuration of silicon is [Ne] 3s² 3p².

An electron configuration is the allocation of the sub-atomic particle, an electron in the orbits of the atom or the molecules. It represents the distribution of electrons around the nucleus.

The general electron configuration of silicon with atomic number 14 is [tex]\rm 1s^{2}2s^{2}2p^{6}3s^{2}3p^{2}.[/tex] The noble gas closest to silicon is neon and can be written as, [tex]\rm [Ne] 3s^{2}3p^{2}.[/tex]

Therefore, the electron configuration of silicon is [tex]\rm [Ne] 3s^{2}3p^{2}.[/tex]

Learn more about electron configuration here:

https://brainly.com/question/20567097

#SPJ4

Answer and explanation:

(c)

A represents the activation energy (the minimum amount of energy needed to start a reaction).

B represents the overall change in energy (the difference between the energy of the reactants and products).

(d)

The reaction profile diagram shows that the reaction is exothermic because the energy change is negative (the products have less energy than the reactants) which shows that energy is lost or given out to the surroundings.

(e)

HCl gas doesn't conduct electricity, but hydrochloric acid does because in HCl, there are hydrogen ions that are free to move so they can carry a charge.

Hope this helps!

From the calculations performed, the Kb of the reaction is 9.9 * 10^-10

The term Kb refers to the base dissociation constant of a solution. We have the following information from the question;

pH of the solution = 8.60

concentration of p-toluidine =  0.016-M

Recall that  pOH = 14 - pH

pOH = 14 - 8.60 = 5.4

[OH] = Antilog (-5.4) = 3.98 * 10^-6 M

We have to set up the ICE table;

          CH3C6H4NH2(aq) + H2O(l) ⇄ CH3C6H4NH3^+(aq) + OH^-(aq)

I             0.016                                           0                                   0

C           -x                                                   +x                                  +x

E    0.016  - x                                            3.98 * 10^-6                3.98 * 10^-6

Hence;

Kb = [3.98 * 10^-6]^2/[0.016  - 3.98 * 10^-6]

Kb =  9.9 * 10^-10

Learn more about Kb: https://brainly.com/question/12726841

Answer:A single-replacement reaction is a chemical reaction in which one element replaces another in a compound. F₂ + 2NaCl → 2NaF + Cl₂, where F replaces Cl in NaCl. A double-replacement reaction is a reaction in which the metals in two ionic compounds exchange partners.

Answer: The liquid oxygen machine is producing less liquid oxygen than normal because there's a low attraction between the molecules.

It should be noted that oxygen in its liquid state will take up less space. It can also be stored at a lower pressure than when it's in its gaseous state.

Explanation:

From the complete question, the liquid oxygen evaporates at a slightly higher The reason for this is due to the fact that they have similarly low attraction between molecules.

Answer:

acidic,non polar,basic

Explanation:

that’s the ones I put and I got a 100% on my test just now

The types of R groups that can exist in amino acids include acidic, non-polar, basic, and polar groups.

1. Acidic R groups: These groups have a negative charge and can donate a proton (H+). An example of an amino acid with an acidic R group is aspartic acid (Asp) or glutamic acid (Glu).

2. Non-polar R groups: These groups are hydrophobic and do not have a charge. They are composed mainly of carbon and hydrogen atoms. Examples of amino acids with non-polar R groups include alanine (Ala), valine (Val), and phenylalanine (Phe).

3. Basic R groups: These groups have a positive charge and can accept a proton. An example of an amino acid with a basic R group is lysine (Lys) or arginine (Arg).

4. Polar R groups: These groups are hydrophilic and have a partial charge. They can form hydrogen bonds with other polar molecules. Examples of amino acids with polar R groups include serine (Ser), threonine (Thr), and asparagine (Asn).

Thus, types of R groups that can exist in amino acids include acidic, non-polar, basic, and polar groups.

Learn more about amino acids,here:

https://brainly.com/question/31872499

#SPJ4

A production of 17.5 × 10⁹ tonnes of carbon will be added to the atmosphere over the course of five years.

In accordance with the principle of mass conservation, mass is not created nor destroyed, just transformed as we infer from statement.

The total carbon generation due to human activities is the sum of the effects derived from the combustion of fossil fuels and the deforestation, whose total over the course of five years is:

[tex]x = (5\,years)\cdot \left(6\times 10^{9}\,\frac{t}{yr} + 2\times 10^{9}\,\frac{t}{yr} \right)[/tex]

[tex]x = 35\times 10^{9}\,t[/tex]

And the part of this production that will remain in the atmosphere during its residence time is:

[tex]x' = 0.5\cdot x[/tex]

[tex]x' = 17.5\times 10^{9}\,t[/tex]

A production of 17.5 × 10⁹ tonnes of carbon will be added to the atmosphere over the course of five years. [tex]\blacksquare[/tex]

To learn more on carbon dioxide, we kindly invite to check this verified question: https://brainly.com/question/3049557

Answer:

D.) 4

Explanation:

Al + 3 O₂ --> 2 Al₂O₃

In the equation, there are:

Reactants: 1 Al and 6 O

Products: 4 Al and 6 O

To determine how many atoms there are of each, you multiply the coefficients by the subscripts attached to the atoms. While the question doesn't ask, as you can see, the oxygen atoms are balanced because there is an equal amount on both sides. To balance the aluminum atoms, you can get 4 aluminum atoms on the reactants side by using a coefficient of 4.

The new equation would look this this:

4 Al + 3 O₂ --> 2 Al₂O₃

There are now:

Reactants: 4 Al and 6 O

Products: 4 Al and 6 O

Answer:

You can use a PH tester do identify the PH of each solution.  Depending on what solutions ur testing, u shouldn't mix them as for there could be either a minor or bad chemical reaction

Explanation:

For ksp of silver sulfate (ag2so4) at 1. 2 ✕ 10-5, the solubility of silver sulfate is mathematically given as

x = 5.26*10^{-4}

Generally, the equation for the  Chemical reaction is mathematically given as

Ag2SO4 ⇄ 2Ag+  + SO4 2-

Therefore

Ksp = [Ag+ ]2 *[SO4 2-]

1.2*10-5 = ( 0.15 +2x)2*(x)

x = 5.26*10^{-4}

In conclusion, the solubility of silver sulfate is

x = 5.26*10^{-4}

Read more about Chemical reaction

https://brainly.com/question/16416932

If the ksp of silver sulfate (ag2so4) at 1.2 × 10⁻⁵, the solubility of silver sulfate is  5.26 × 10⁽⁻⁴⁾.

ksp value determines the equilibrium between the solids and its respective ions in a solution.

The reaction is [tex]\rm Ag_2SO_4 \leftrightharpoons 2Ag+ + SO_4^2-[/tex]

The ksp pf silver sulfate is  1.2 × 10⁻⁵

Tho calculate the solubility?

Putting the values in the equation

[tex]\rm Ksp = [Ag^+ ]^2 \times [SO_4^ 2^-]\\\\1.2\times 10^-^5 = ( 0.15 +2x)2\times (x)\\x = 5.26\times 10^{-4}[/tex]

Thus, the solubility of silver sulfate is  5.26 × 10⁽⁻⁴⁾.

Learn more about silver sulfate

https://brainly.com/question/17094293

#SPJ4

The shorthand equation shows us in a glance what happens in the electrochemical reaction. For a lead storage battery, we have; PbSO4(s)/H2O//Pb (s) ,PbO2(s) /H2SO4

An electrochemical reaction is one in which electrical energy is produced from a chemical reaction. The equations in a lead storage battery are;

Anode: Pb (s) + HSO4- → PbSO4(s) + H+ + 2 e-

Cathode: PbO2(s) + HSO4- + 3 H+ + 2 e- → PbSO4(s) + 2 H2O

Overall: Pb (s) + PbO2(s) + 2 HSO4- + 2 H+ → 2 PbSO4(s) + 2 H2O

Hence, the shorthand notation of this reaction is;

PbSO4(s)/H2O//Pb (s) ,PbO2(s) /H2SO4

Learn more about electrochemical reaction: https://brainly.com/question/7484696

The color of the system will change between pink and blue depending on the concentration of species.

Equilibrium is attained in a reaction when the rate of forward reaction is equal to the rate of reverse reaction. Now consider the equilibrium;

Co(H2O)6^2+(aq) + 4Cl^-(aq) ⇄ CoCl4^2-(aq) + 6H2O(l)

We know that Co(H2O)6^2+(aq) is pink while  CoCl4^2-(aq)  is blue hence, if the concentration of the species are changed, the color of the system will change accordingly.

Learn more about equilibrium: https://brainly.com/question/13524990?

The pH of a solution of H₂SO₄ that has [H₃O⁺] is 5.45 × 10⁻⁵ M, is 4.26.

pH is define as the negative logarithm of the concentration of H⁺ or H₃O⁺ ions, and it is represented as:

pH = -log[H⁺]

Concentration of H₃O⁺ in H₂SO₄ solution = 5.45 × 10⁻⁵ M

pH of H₂SO₄ solution will be calculated as:

pH = -log(5.45 × 10⁻⁵)

pH = -(-4.26)

pH = 4.26

Hence required pH is 4.26.

To know more about pH, visit the below link:

https://brainly.com/question/522383

Answer:

4.26 is the answer

Explanation:

edge 2022

Answer:

A. acidic

Explanation: