Which of the following actions CANNOT be performed by right-clicking on an Applied Step?
A. Rename
B. Delete Until End
C. Move Up
D. Replace

To draw a rectangle taller than it is wide using Turtle graphics in Python, you can use the following code:

from turtle import *

# Move forward to draw the height of the rectangle

forward(100)

# Turn right to start drawing the width of the rectangle

right(90)

# Move forward to draw the width of the rectangle

forward(50)

# Turn right to draw the height of the rectangle

right(90)

# Move forward to complete the rectangle

forward(100)

# Turn right to face the default starting position

right(90)

# Move forward to move the turtle away from the rectangle

forward(50)

# Hide the turtle to finish the drawing

hideturtle()

In this code, we first move forward by 100 units to draw the height of the rectangle.

Then, we turn right by 90 degrees to start drawing the width of the rectangle. We move forward by 50 units to draw the width of the rectangle, then turn right by 90 degrees to draw the height of the rectangle.

Finally, we move forward by 100 units to complete the rectangle, turn right by 90 degrees to face the default starting position, move forward by 50 units to move the turtle away from the rectangle, and hide the turtle to finish the drawing.

Learn more about code at:

https://brainly.com/question/30429605

#SPJ1

Where the above condition exists,

a) To form a 32Gx64 memory using 1Gx16 RAM chips with high interleaving, we need 2048 RAM chips.

b) Assuming 4 chips per bank, we need 512 banks in total.

c) Each chip should have 29 address lines to address 1Gx16 RAM chips.

d) For a memory address, we need 35 bits since 32G = 2^35 and each word is 64 bits in size.

e) The chip select signal requires 11 bits (A35-A25) and the remaining 24 bits (A24-A0) are used for the address on the chip.

f) In this case, the chip select signal would require 12 bits (A36-A25) and the remaining 24 bits (A24-A0) would be used for the address on the chip.

a) A 32Gx64 memory with high interleaving requires 2048 1Gx16 RAM chips, with each chip capable of storing 1G words.

b) The memory will need 512 banks, with each bank containing 4 chips to form a 32Gx64 memory.

c) Each RAM chip requires 29 address lines to address the 1Gx16 RAM chips correctly.

d) A 35-bit memory address is required as there are 32G words and each word is 64 bits in size for high interleaving.

e) The chip select signal uses 11 bits (A35-A25) and the remaining 24 bits (A24-A0) for the address on the chip.

f) With low interleaving, each word would span across 4 chips. So, we need 8192 RAM chips, 2048 banks, each chip should have 28 address lines, and 36 bits are needed for a memory address (2^36 = 64G). The chip select signal would require 12 bits (A36-A25) and the remaining 24 bits (A24-A0) would be used for the address on the chip.

Learn more about RAM at:

https://brainly.com/question/30745275

#SPJ1

Yes, I'm willing to assist you in putting the FCFS (First-Come, First-Serve) scheduling method into practise. Here is a Python implementation of the algorithm.

On a first-come, first-served basis, jobs are completed. A preemptive, non-preemptive scheduling approach is used. Simple to comprehend and use. The implementation makes use of a FIFO queue.

   def __init__(self, pid, arrival_time, burst_time):

       self.pid = pid

       self.arrival_time = arrival_time

       self.burst_time = burst_time

       self.start_time = None

       self.completion_time = None

def fcfs(processes):

   """FCFS (First-Come, First-Serve) scheduling algorithm"""

   n = len(processes)

   current_time = 0

   waiting_time = 0

   turnaround_time = 0

   response_time = 0

   for i in range(n):

       # Set start time of the process

       if current_time < processes[i].arrival_time:

           current_time = processes[i].arrival_time

       processes[i].start_time = current_time

       # Update waiting time, response time and current time

       waiting_time += current_time - processes[i].arrival_time

       response_time += current_time - processes[i].arrival_time

       current_time += processes[i].burst_time

       # Set completion time of the process

       processes[i].completion_time = current_time

       # Update turnaround time

       turnaround_time += current_time - processes[i].arrival_time

# Determine the average turnaround, response, and waiting times.

   avg_waiting_time = waiting_time / n

   avg_response_time = response_time / n

   avg_turnaround_time = turnaround_time / n

   # Calculate CPU utilization

   total_burst_time = sum(process.burst_time for process in processes)

   cpu_utilization = total_burst_time / current_time

   # Return the results

   return (avg_waiting_time, avg_response_time, avg_turnaround_time, cpu_utilization)

To know more about Python visit:-

https://brainly.com/question/30427047

#SPJ1

The correct code is given below.

It is an interpreted language, which means that it does not need to be compiled before being executed, making it a popular choice for rapid prototyping, scripting, and data analysis.

Based on the code you provided, it looks like you are trying to create a checkerboard pattern with alternating 1's and 0's. However, the code you wrote doesn't quite achieve that goal.

Here is a corrected version of the code that should work for you:

def print_board(board):

   for row in board:

       print(" ".join([str(x) for x in row]))

board = []

for i in range(8):

   row = []

   for j in range(8):

       if (i + j) % 2 == 0:

           row.append(1)

       else:

           row.append(0)

   board.append(row)

print_board(board)

In this corrected code, we first define a function print_board that takes a 2D list and prints it out as a grid of numbers.

We then create an empty list board and use nested loops to fill it with alternating 1's and 0's in a checkerboard pattern.

Note that we calculate the value of each cell based on its row and column indices, using the expression (i + j) % 2 == 0 to determine whether it should be a 1 or a 0.

Finally, we call the print_board function with our completed board to display the checkerboard pattern.

To know more function visit:

https://brainly.com/question/29331914

#SPJ1

Answer:

Control activities

Explanation:

Control activities refers to policies and procedures that support the cultural issues such as integrity, ethical values, competence, philosophy, and operating style

Increased innovation, improved pace of innovation, increased global coordination are the benefits of information technology.

Using computer systems or other electronic devices to retrieve information is known as information technology (IT).

Information technology underpins so many aspects of our everyday lives, including our workforce, company processes, and personal access to information.

Information technology advantages include:

Thus, these are the benefits of information technology.

For more details regarding information technology, visit:

https://brainly.com/question/14426682

#SPJ1

Answer:

To answer this question, we need more context about the specific organization and action in question. Without additional information, it is difficult to identify who may have been hurt by the organization's action.

Generally speaking, an organization's actions can potentially affect a wide range of stakeholders, including employees, customers, shareholders, suppliers, the community, and the environment. The extent to which each of these stakeholders is impacted and whether they are hurt by the organization's actions would depend on the specific circumstances of the situation.

For example, if an organization lays off a significant number of employees, then those employees would likely be hurt by the organization's action. On the other hand, if an organization implements a new environmentally-friendly policy, then the environment and potentially the community may benefit, while the organization's profits may be hurt.

In order to determine who was hurt by a specific organization's action, it is necessary to look at the specific details of the situation and consider the impacts on all relevant stakeholder

Explanation:

The names of some different types of viruses:

Influenza virus: This is a common virus that causes seasonal flu in humans.

Human immunodeficiency virus (HIV): This is the virus that causes acquired immunodeficiency syndrome (AIDS) in humans.

Herpes simplex virus: This is a virus that can cause cold sores or genital herpes in humans.

Human papillomavirus (HPV): This is a virus that can cause genital warts and certain types of cancer, including cervical cancer.

Rabies virus: This is a virus that is transmitted by animal bites and can cause a deadly infection in humans.

Norovirus: This is a common virus that causes stomach flu and is often spread through contaminated food or water.

Ebola virus: This is a virus that can cause a severe and often fatal disease in humans and other primates.

Zika virus: This is a virus that is primarily spread by mosquitoes and can cause birth defects in infants born to infected mothers.

Adenovirus: This is a common virus that can cause a wide range of respiratory and gastrointestinal illnesses in humans.

Answer:true

Explanation:

game controller, gaming controller, or simply controller, is an input device used with video games or entertainment systems to provide input to a video game, typically to control an object or character in the game.

An if-elif-else statement that compares ph to 7.0 and makes the following assignments, based on the result is that if ph is less than 7, assign 0 to neutral. Thus, option A is correct.

An if-else-if statement that compares ph to 7.0 and makes the following assignments (respectively) to the variables neutral, base, and acid 0,0,1 if ph is less than 7.

If pH is greater than 7, assign 0 to neutral, 1 to base, and 0 to acid. if ph is equal to 7, assign 1 to neutral, 0 to base, and 0 to acid.

Therefore, An if-elif-else statement that compares ph to 7.0 and makes the following assignments, based on the result is that if ph is less than 7, assign 0 to neutral. Thus, option A is correct.

Learn more about neutral on:

https://brainly.com/question/15395418

#SPJ1

The following code are

num_printed = 0

num_stars = int(input())

while num_printed < num_stars:

   print('*', end='')

   num_printed += 1

Code is a set of instructions that tells a computer, machine, or program what to do and how to do it. It is written in a programming language and can be compiled into machine-readable instructions to be executed by a computer processor. Code is the foundation of computing and is used to create software and applications. Code is usually written by a programmer who then needs to debug and test it to make sure it works properly. Code can be written in various programming languages such as Python, Java, C++, and more. Code can be used to create websites, mobile applications, games, and more. Code is essential for the development of modern technologies and can be found in almost every aspect of our lives.

To learn more about code

https://brainly.com/question/26134656

#SPJ1

Answer:

Explanation:

To complete the task, follow these steps:

Open the file order_book_data.txt using a text editor or programming language.

Remove all the lines containing "Order Book" using regular expressions or string matching.

Remove all empty lines using regular expressions or string matching.

Remove all spaces using regular expressions or string matching.

Convert the Bid and Ask prices to USD if they are in YEN by using the exchange rate. For example, if 1 YEN is equivalent to 0.0094 USD, then the formula to convert from YEN to USD would be Bid/100 * 0.0094 and Ask/100 * 0.0094, assuming the Bid and Ask prices are in YEN per 100 units.

Create a header line with the columns Ticker, Date, Bid, Ask.

Write the header line and formatted lines to a comma-separated value (CSV) file called mktDataFormat.csv using a text editor or programming language.

Here is an example Python code that could be used to accomplish these steps:

import re

# Open the file

with open('order_book_data.txt', 'r') as f:

   data = f.read()

# Remove Order Book lines

data = re.sub(r'\*+ Order Book: \d+ \*+', '', data)

# Remove empty lines

data = re.sub(r'\n\s*\n', '\n', data)

# Remove spaces

data = re.sub(r'\s', '', data)

# Convert YEN to USD

yen_to_usd_rate = 0.0094

data = re.sub(r'(\w+),(\d+),(\d+),(\d+),YEN', lambda m: f"{m.group(1)},{m.group(2)},{int(m.group(3))*yen_to_usd_rate:.4f},{int(m.group(4))*yen_to_usd_rate:.4f},USD", data)

# Create header line

header = 'Ticker,Date,Bid,Ask\n'

# Write formatted data to file

with open('mktDataFormat.csv', 'w') as f:

   f.write(header)

   f.write(data)

Note that this is just one possible implementation, and there are many other ways to achieve the same result using different programming languages or text ed

The following combinations of process state and thread states could occur: 1. Blocked and Ready for TCB1 and Ready for TCB2, 2. Ready and Running for TCB1 and Ready for TCB2, 3. Blocked and Blocked for both TCBs.

What is process state?

Process state refers to the current status of a process in a system. It is typically determined by the operating system and is based on the set of instructions that the process is currently executing. Process state can be divided into several categories, including running, ready, blocked, and terminated. When a process is running, it is actively executing instructions and making progress. When a process is ready, it is prepared to execute instructions but is waiting for the operating system to issue a scheduling event. When a process is blocked, it is waiting for an event or resource before it can continue execution.

To learn more about process state

https://brainly.com/question/29738509

#SPJ1

The maximum value of f(3) is 27 + 9*0 + 3*0 + 1 = 28. The polynomial that achieves this maximum value is t³ + t + 1.

A group of programs which it consume input, change data, and provide a result are collectively referred to as a program. It is also known as a program or an application. As an example, users may create and compose documents using the word processing program Microsoft Word.

The maximum value of f(3) = 3³ + a*3² + b*3 + c is 27 + 9a + 3b + c.

Since the values of f(0), f(1), f(2) all lie in the interval [-1, 1], we have:

-1 <= f(0) = c <= 1

-1 <= f(1) = 1 + a + b <= 1

-1 <= f(2) = 8 + 4a + 2b <= 1

Solving these inequalities for a, b, and c gives:

-1 <= c <= 1

-2 <= a + b <= 0

-5 <= 4a + 2b <= -3

Therefore, the maximum value of f(3) is 27 + 9*0 + 3*0 + 1 = 28. The polynomial that achieves this maximum value is t³ + t + 1.

To know more about Program visit:

https://brainly.com/question/23275071

#SPJ1

In Access Query Design View, [DueDate] in Date() Unwise decisions: [DueDate] - Day() - [DueDate] - Today - Date due date

The results of the Append query will be added to the table you just mentioned. In the design grid, you'll see an Add To row. You must now define the fields to which you want to add. On another table, add the fields you want to add.

The SELECT command results from two or more queries are combined using the UNION operator.

To know more about Access Query Design visit:-

https://brainly.com/question/16349023

#SPJ1

Will be using a dust pan and tongs, which are regarded good practice when cleaning up sizable bits of contaminated glassware in a lab biohazard spill, together with gloves, a lab coat, & face protection.

Biological compounds that jeopardize the well-being of living things, particularly humans, are referred to as biohazards, sometimes known as biological hazards. Medical trash or samples of microorganisms, viruses, other poisons which can be harmful to human health are examples of this.

Biological dangers can come from a variety of sources, including bacteria, viruses, bugs, plants, birds, mammals, and people. These sources have the potential to have a wide range of negative health effects, from allergies and skin rashes to infections (such as AIDS, TB, and cancer), as well as other diseases.

To know more about biohazard visit:

brainly.com/question/30327296

#SPJ1

Another built-in Windows tool, Resource Monitor, offers more thorough data on resource consumption, including CPU, memory, disc, and network usage.

Logman. A utility called Logman (logman.exe) is included with the Windows OS. At the command prompt, you can use it to create and maintain event trace session and performance logs.

By hitting Win + R on the keyboard, you may bring up the Run window. Type "resmon" in the Open area and hit Enter on the keyboard or click OK. Resource Monitor is now accessible and ready for use.

To know more about Windows visit:-

https://brainly.com/question/13502522

#SPJ1

Answer:

(a) Here is the declaration of the BookInventory structure:

typedef struct {

 char bookID[10];

 char author[50];

 char title[100];

 char publisher[50];

 int year;

 int quantity;

} BookInventory;

(b) Here is the declaration of the Transactions structure:

typedef struct {

 char transactionCode;

 int quantity;

} Transactions;

(c) and (d) Here is the definition of a local variable txn of type Transactions, and the code to obtain and process the transaction details:

Transactions txn;

while (1) {

 printf("Transaction Code (S=sold, P=purchased, X=exit): ");

 scanf(" %c", &txn.transactionCode);

 if (txn.transactionCode == 'X') {

   printf("Exited. End of Transactions.\n");

   break;

 }

 printf("Transaction Quantity: ");

 scanf("%d", &txn.quantity);

 switch (txn.transactionCode) {

   case 'S':

     book.quantity -= txn.quantity;

     printf("Sold: %d copies of \"%s\" by %s. There are now %d copies in stock.\n",

            txn.quantity, book.title, book.author, book.quantity);

     break;

   case 'P':

     book.quantity += txn.quantity;

     printf("Purchased: %d copies of \"%s\" by %s. There are now %d copies in stock.\n",

            txn.quantity, book.title, book.author, book.quantity);

     break;

   default:

     printf("Invalid transaction code!\n");

     break;

 }

}

(e) Here is the complete program that includes the definition of the BookInventory and Transactions structures, the initialization of a book variable, and the transaction processing loop:

#include <stdio.h>

typedef struct {

 char bookID[10];

 char author[50];

 char title[100];

 char publisher[50];

 int year;

 int quantity;

} BookInventory;

typedef struct {

 char transactionCode;

 int quantity;

} Transactions;

int main() {

 BookInventory book = {

   "BK-2044",

   "JK Rowling",

   "Harry Potter and the Prisoner of Azkaban",

   "Bloomsbury",

   1999,

   25

 };

 Transactions txn;

 while (1) {

   printf("Transaction Code (S=sold, P=purchased, X=exit): ");

   scanf(" %c", &txn.transactionCode);

   if (txn.transactionCode == 'X') {

     printf("Exited. End of Transactions.\n");

     break;

   }

   printf("Transaction Quantity: ");

   scanf("%d", &txn.quantity);

   switch (txn.transactionCode) {

     case 'S':

       book.quantity -= txn.quantity;

       printf("Sold: %d copies of \"%s\" by %s. There are now %d copies in stock.\n",

              txn.quantity, book.title, book.author, book.quantity);

       break;

     case 'P':

       book.quantity += txn.quantity;

       printf("Purchased: %d copies of \"%s\" by %s. There are now %d copies in stock.\n",

              txn.quantity, book.title, book.author, book.quantity);

       break;

     default:

       printf("Invalid transaction code!\n");

       break;

   }

 }

 return 0;

}

The first article is given below;:

"Network Security Concerns Rise With the Surge in Remote Work"

Source: Dark Reading

Summary: The article discusses the rise in network security concerns with the increase in remote work. The author highlights how the pandemic has forced companies to rely more heavily on virtual private networks (VPNs) to ensure secure connections for remote workers.

However, VPNs have their vulnerabilities and can be exploited by hackers to gain access to sensitive data. The article suggests implementing stronger authentication measures, training employees on safe remote work practices, and monitoring network traffic to detect and respond to any suspicious activity.

Read more about network security here:

https://brainly.com/question/25720881

#SPJ1

The script that tests this function and add code to trace the argument on each call is in the explanation part.

Analysis, algorithm generation, resource use profiling, and algorithm implementation are some of the duties involved in programming.

Here's an example script that tests the printAll() function and adds code to trace the argument on each call:

def printAll(seq):

   print("Sequence: ", seq)

   if seq:

       print(seq[0])

       printAll(seq[1:])

# Test the function with a list

lst = [1, 2, 3, 4, 5]

printAll(lst)

One hidden cost of running this function is that it uses recursion, which can lead to performance issues if the input sequence is very large

Thus, the printAll() function works as expected by recursively printing each element in the input sequence.

For more details regarding programming, visit:

https://brainly.com/question/11023419

#SPJ1

On a computer that will primarily serve as a client in a network, clustering functions are the least likely to be installed.

The portion of an operating system, software, or device that enables a user to enter and receive information is referred to as the user interface (UI). Text is shown on a text-based user interface (see the image to the left), and commands are often entered using a keyboard on a command line.

The kernel, API or application programme interface, user interface and file system, hardware devices, and device drivers are the primary elements of an OS.

To know more about network visit:-

https://brainly.com/question/29350844

#SPJ1

Answer:

False

Explanation:

Database shadowing techniques are generally used in organizations that require immediate data recovery after an incident or disaster. Shadowing involves creating and maintaining a redundant copy (shadow copy) of a database on a separate server or storage device, which can be used to quickly recover the data if the primary database becomes unavailable due to a system failure, natural disaster, or other event. Shadowing is a common technique used to ensure high availability and reduce the risk of data loss in mission-critical applications.

The Packet Tracer simulation tool, which enables users to test out various configurations and settings before implementing them on a real network.

With practical experience, Cisco Packet Tracer's major goal is to assist students in learning networking fundamentals and gaining expertise in Cisco-specific technologies. This tool cannot replace hardware routers or switches because the protocols are developed using a software-only approach.

Taking a genuine interest in everyone you meet is the best method to expand your network. The majority of people are aware when someone is interested in them more for what they can offer than for what they might be able to receive from the relationship.

To know more about network visit:-

https://brainly.com/question/13992507

#SPJ1

The first 10 bits of an IPv6 address are often represented by the hexadecimal value "FE80," while the least-significant 64 bits of the address are the Interface Identifier (IID)

RFC 4291 (IPv6 Addressing Architecture), which defines IPv6 link-local addresses, is covered by the prefix fe80::/10. In actual usage, just fe80::/64 is employed.

An IPv6 address known as Link Local is used to distinguish hosts on a single network link. A link local address, which has the prefix FE80 and can only be used for local network communication, is not routable.

To know more about IPv6 visit:-

https://brainly.com/question/15733937

#SPJ1

True, benefits and drawbacks of artificial intelligence artificial intelligence (a.i.) is a powerful tool for aiding human decision making.

Artificial Intelligence (AI) refers to the development of computer systems that can perform tasks that typically require human intelligence, such as learning, reasoning, problem-solving, and decision-making. AI systems are designed to simulate human intelligence by analyzing and processing large amounts of data, recognizing patterns, and using algorithms to make decisions.

Benefits of AI include:

Drawbacks of AI include:

Managers need to be aware of both the benefits and drawbacks of AI to make informed decisions about how to use the technology in their organizations.

To know more about analyze visit:

https://brainly.com/question/14839505

#SPJ1

Answer:

import java.util.Scanner;

public class MenuCalories {

   public static void main(String[] args) {

       Scanner scanner = new Scanner(System.in);

       // Prompt the user for the name of the menu item

       System.out.print("Enter the name of the menu item: ");

       String itemName = scanner.nextLine();

       // Prompt the user for the number of grams of fat, protein, and carbohydrates

       System.out.print("Enter the number of grams of fat: ");

       double fatGrams = scanner.nextDouble();

       System.out.print("Enter the number of grams of protein: ");

       double proteinGrams = scanner.nextDouble();

       System.out.print("Enter the number of grams of carbohydrates: ");

       double carbGrams = scanner.nextDouble();

       // Calculate the total number of calories in the item

       double totalCalories = (fatGrams * 9) + (proteinGrams * 4) + (carbGrams * 4);

       // Calculate the percentage of calories that come from fat

       double fatCalories = fatGrams * 9;

       double percentFatCalories = (fatCalories / totalCalories) * 100;

       // Display the results to the user

       System.out.println("Total calories for " + itemName + ": " + totalCalories);

       System.out.printf("Percentage of calories from fat: %.2f%%\n", percentFatCalories);

   }

}

Teach the receptionist to store her iPad in a closed drawer when not in use and to wipe the hard drives' data using data wiping software.

Access control, surveillance, and security testing are considered the three most crucial elements of a physical security plan by security professionals and collectively they improve the security of your place. At the outermost point of your security perimeter, which you should build early on in this procedure, access control may be initiated.

Firewalls, antispyware programmes, and antivirus software are other crucial tools for preventing attacks on your laptop.

To know more about software visit:-

https://brainly.com/question/1022352

#SPJ1

The program for a shuttle van picks up passengers and drives them to a destination, where they all leave the van is in explanation part.

The process of carrying out a specific computation through the design and construction of an executable computer programme is known as computer programming.

To complete the functions using the java program:

import java.util.Scanner ;

import java.util.Arrays ;

public class Van {

private String[] passengers ;

private int count ;

public Van(int maxPassengers) {

passengers = new String[maxPassengers];

count = 0 ;

}

public void board(String name) {

if(count < passengers.length) {

passengers[count] = name ;

count += 1 ;

}

}

public void drive() {

}

public void printPassengers() {

System.out.println(Arrays.toString(passengers));

}

public static void main(String[] args) {

Scanner in = new Scanner(System.in);

int maxPassengers = in.nextInt();

in.nextLine();

Van myVan = new Van(maxPassengers);

myVan.board(in.nextLine());

myVan.printPassengers();

myVan.board(in.nextLine());

myVan.printPassengers();

myVan.board(in.nextLine());

myVan.printPassengers();

myVan.drive();

myVan.board(in.nextLine());

myVan.board(in.nextLine());

myVan.printPassengers();

}

}

Thus, this is the code for the given scenario.

For more details regarding programming, visit:

https://brainly.com/question/11023419

#SPJ1

According to the question, recursive function power(x, n) that returns the value of x^n are given below:

A recursive function is a type of function which calls itself within its own code. This is a useful approach for solving problems which can be broken down into smaller, simpler subproblems. The recursive function will call itself until the base case is reached and a result is returned.

var isEven = function(n) {

   return n % 2 === 0;

};

var isOdd = function(n) {

   return !isEven(n);

};

var power = function(x, n) {

   println("Computing " + x + " raised to power " + n + ".");

   // base case

   if (n === 0) {

       return 1;

   }

   // recursive case: n is negative

   if (n < 0) {

       return 1 / power(x, -n);

   }

   // recursive case: n is odd

   if (isOdd(n)) {

       return x * power(x, n - 1);

   }

   // recursive case: n is even

   if (isEven(n)) {

       var y = power(x, n/2);

       return y * y;

   }

};

var displayPower = function(x, n) {

   println(x + " to the " + n + " is " + power(x, n));

};

//displayPower(3, 0);

//Program.assertEqual(power(3, 0), 1);

//displayPower(3, 1);

//Program.assertEqual(power(3, 1), 3);

//displayPower(3, 2);

//Program.assertEqual(power(3, 2), 9);

//displayPower(3, -1);

//Program.assertEqual(power(3, -1), 1/3);

To learn more about recursive function

https://brainly.com/question/25778295

#SPJ1