Which one of the following is not considered a noncovalent interaction? A) carbon-carbon bonds. B) hydrogen bonds. C) hydrophobic interactions.

A maritime tropical meeting a continental tropical, will produce this kind of weather.

When maritime tropical air masses meet continental tropical air masses, it can lead to the formation of weather patterns that can have significant impacts on the local and regional weather conditions.

Maritime tropical air masses are warm and humid air masses that form over the tropical and subtropical oceans, while continental tropical air masses are hot and dry air masses that form over land areas in the subtropics and tropics. When these two air masses meet, the warm, moist maritime tropical air rises over the denser, drier continental tropical air.

As the air rises, it cools and the water vapor in it condenses, leading to the formation of clouds and possibly precipitation. The amount and type of precipitation that forms depend on a variety of factors, such as the temperature and humidity of the two air masses, the strength and direction of the wind, and the topography of the land.

To know more about subtropics, visit:

https://brainly.com/question/30586789

#SPJ1

To calculate the time it will take to plate out 1.86 g of chromium metal when a current of 15.0 A is applied to a solution of Cr3+ ions, we can use Faraday's Law of Electrolysis:

This law states that the amount of substance deposited at an electrode during electrolysis is directly proportional to the amount of electric charge that passes through the solution.

t = (1.86 g Cr) / (F * I * n * m)

Where F is Faraday's Constant (96485 C/mol), I is the current (15 A), n is the number of electrons exchanged (3) and m is the molar mass of chromium (52 g/mol).

Substituting the values in place we get

t = 1.86 g / 96485 * 15 * 3 * 52

[The units for a charge, electricity and gram get canceled out and we are left with the unit of time]

Thus giving us a result of t = 1.6 seconds.

#SPJ1

Similar Question: https://brainly.com/question/30946051

Liters of a 40% solution are equivalent to 252 liters, whereas liters of a 15% solution are equivalent to 448 liters.

How much is a percentage?

The hundredth part of a given number is what is meant by the word "percentage."

The answer to the query is

Given,

700 litres of solution total.

Acid solution percentage is equal to 24%.

'x' stands for a 40% acid solution.

"700-x" stands for the 15% of the solution.

Replace the value according to the condition we are provided,

Therefore,

252 litres of acid solution with a 40% concentration

Moreover, 15% of the solution is

As a result, 252 liters of a 40 percent solution are equal to one liter, and 448 liters of a 15 percent solution are.

Learn more about  solution here:

https://brainly.com/question/30665317

#SPJ4

The manufacturer needs to use 252 liters of the 40% solution and 448 liters of the 15% solution to obtain 700 liters of a 24% acid solution.

Let x be the number of liters of the 40% solution and y be the number of liters of the 15% solution needed.

Since we want to obtain 700 liters of a 24% solution, we can set up the following system of equations based on the concentration and amount of acid in each solution:

x + y = 700 (total volume of the solution)

0.4x + 0.15y = 0.24(700) (total amount of acid in the solution)

Simplifying the second equation, we get:

0.4x + 0.15y = 168

We can now use the first equation to solve for one of the variables in terms of the other:

y = 700 - x

Substituting this expression into the second equation, we get:

0.4x + 0.15(700 - x) = 168

Simplifying and solving for x, we get:

0.4x + 105 - 0.15x = 168

0.25x = 63

x = 252

So we need 252 liters of the 40% solution and 700 - 252 = 448 liters of the 15% solution.

To learn more about acid

https://brainly.com/question/14072179

#SPJ4

The solubility of barium iodate is 2.73 g/L.

Solubility is a measure of how much of a solid, liquid or gas can be dissolved in a solvent, such as water or another liquid. It is a property of a substance that determines how much of a given substance can be dissolved in a given amount of solvent. Solubility is an important factor in many areas of science and technology, such as chemistry, pharmacology, and food production. Solubility affects the rate of reaction, the process of forming a new substance, and the physical characteristics of a solution. It is also important for predicting the solubility of a given material and for understanding the behavior of a solution.

Solubility of barium iodate can be calculated using the Ksp expression:

Ksp = [Ba2+][IO3-]2

At equilibrium, we can assume that the concentration of Ba2+ and IO3- is equal to the solubility of barium iodate, s, in moles per litre.

[Ba2+] = [IO3-] = s

Substituting this into the Ksp expression, we get:

Ksp = s2 x (2s)2 = 4.01 x 10-9

Rearranging this equation to solve for s, we get:

s2 = 4.01 x 10-9/ (2s)2

s2 = 0.5 x 10-9

s = 0.007 moles/L

To convert this to grams per litre, we need to multiply by the molar mass of barium iodate, which is 391 g/mol.

s = 0.007 moles/L x 391 g/mol = 2.73 g/L

Therefore, the solubility of barium iodate is 2.73 g/L.

To learn more about  solubility
https://brainly.com/question/23946616
#SPJ1

The approximate height of the barrel is 22.9 inches. They are also important in mathematics and engineering, as they are used to model and solve problems in various fields, such as calculus, geometry, physics, and fluid mechanics.

What is Cylinder?

A cylinder is a three-dimensional geometric shape that consists of two parallel, congruent circular bases connected by a curved surface. The curved surface is composed of a set of parallel lines that connect the two circular bases.

The cylinder can be described by several measurements, including its height (the distance between the two circular bases), its radius (the distance from the center of one circular base to its edge), and its diameter (the distance across the cylinder at its widest point, passing through the center of the circular bases).

We can use the formula for the volume of a cylinder to find the height of the barrel:

V = πr²h

We are given that the volume of the oil is 10,164 cubic inches and the diameter (which is twice the radius) is 23 inches.

r = 23/2 = 11.5 inches

10,164 = π(11.5)²h

Solving for h, we get:

h = 10,164 / (π(11.5)²) ≈ 22.9 inches

So the approximate height of the barrel is 22.9 inches.

Learn more about Cylinder from given link

https://brainly.com/question/27440983

#SPJ1

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

QUESTION 5:

According to question 5, 4 moles of iron reacts with 3 moles of oxygen gas to produce 2 moles of ferric oxide.

56.33 grams of iron is equivalent to 1.01 moles

This means that 1.01 moles of iron will produce 0.51 moles of ferric oxide.

Mass of ferric oxide = 0.51 × 159.69 = 80.6 grams.

QUESTION 6:

According to question 6, 3 moles of hydrogen gas reacts with 1 mole of nitrogen gas to produce 2 moles of ammonia.

13.55 grams of hydrogen is equivalent to 6.78 moles

This means that 6.78 moles of hydrogen will produce 4.52 moles of ammonia

Mass of ammonia = 4.52 × 17 = 76.8 grams.

Learn more about mass at: https://brainly.com/question/9743981

#SPJ1

Answer:

2.94 g/cm3

Explanation:

To find the bulk density of the rock, we need to consider the weighted average of the densities of each mineral component, taking into account their respective proportions:

Bulk density = (0.3 x 2.65 g/cm3) + (0.25 x 3.50 g/cm3) + (0.35 x 2.70 g/cm3) + (0.1 x 3.28 g/cm3)

Bulk density = 0.795 + 0.875 + 0.945 + 0.328

Bulk density = 2.943 g/cm3

Therefore, the bulk density of the rock is 2.94 g/cm3 (rounded to two decimal places).

Answer:

The overall balanced chemical equation for the reaction is: 3O3 → 3O2 + O b. The intermediate in the mechanism is O3. c. The order of the reaction is first order with respect to O3 and second order with respect to O. d. The rate law for the overall reaction is rate = k[O3]^1[O]^2.

The 0.0500 M HNO2 solution has a pH of 1.81 and a 44.5% ionisation percentage.

A solution's acidity or basicity is determined by its pH. It is described as the solution's hydrogen ion concentration's negative logarithm. While lower pH values denote acidity and higher ones denote basicity, a pH of 7 is regarded as neutral.

Since HNO2 is a weak acid, the percent ionisation and pH of the solution can be determined using the acid dissociation constant (Ka) formula.

Ka = (H+)(NO2-)/(HNO2)

We can write: Ka = x2 /, where x is the concentration of H+ and NO2- and (0.0500-x) is the concentration of HNO2 (0.0500 - x)

The quadratic formula is used to solve for x, and the result is x = 0.0154 M

For these reasons, [H+] = [NO2-] = 0.0154 M and [HNO2] = 0.0346 M.

We apply the formula: to determine the % ionisation.

% ionisation is calculated as [H+]/[HNO2] x 100%, or (0.0154 / 0.0346) x 100, or 44.5%

We use the following formula to determine pH:

pH = -log(0.0154) = 1.81 where pH = -log(H+)

As a result, the 0.0500 M HNO2 solution has a pH of 1.81 and a 44.5% ionisation percentage.

Learn more about pH here:

brainly.com/question/15289741

#SPJ1

The mean should be set to 511.9 ml to ensure that a half-liter bottle is not underfilled 99 percent of the time.

Probability is a number between 0 and 1 that expresses the likelihood of an event occurring.

In mathematical terms, the probability of an event E is given by:

P(E) = (number of outcomes favorable to E) divided by  (total number of possible outcomes)

(a) To ensure a 95 percent probability that a half-liter bottle will not be underfilled, we need to find the mean that corresponds to the 2.5th percentile of the normal distribution. This is because 2.5 percent of the area under the curve falls below this point, leaving 95 percent in the upper tail.

Using a standard normal distribution table or calculator, we can find the z-score that corresponds to the 2.5th percentile, which is -1.96. We can then use the formula:

-1.96 = (x - μ) / σ

where x is the target fill amount (500 ml), σ is the standard deviation (5 ml), and μ is the mean that we need to set. Solving for μ, we get:

μ = x - (-1.96) * σ

= 500 - (-1.96) * 5

= 509.8 ml

As a result, the mean should be set to 509.8 ml to ensure that a half-liter bottle is not underfilled 95 percent of the time.

(b) To ensure a 99 percent probability that a half-liter bottle will not be underfilled, we need to find the mean that corresponds to the 0.5th percentile of the normal distribution. This is because 0.5 percent of the area under the curve falls below this point, leaving 99 percent in the upper tail.

Using the same approach as in part (a), we can find the z-score that corresponds to the 0.5th percentile, which is -2.58. We can then use the formula:

-2.58 = (x - μ) / σ

where x is the target fill amount (500 ml), σ is the standard deviation (5 ml), and μ is the mean that we need to set. Solving for μ, we get:

μ = x - (-2.58) * σ

= 500 - (-2.58) * 5

= 511.9 ml

As a result, the mean should be set to 511.9 ml to ensure that a half-liter bottle is not underfilled 99 percent of the time.

To know more about mean, visit:

https://brainly.com/question/29895356

#SPJ1

The molecular and net ionic equations of reaction between potassium oxide (K₂O) and water (H₂O) are [tex]\mathrm{K_2O(aq)+H_2O(l)\rightarrow 2 KOH(aq)}[/tex] and [tex]\mathrm{O_2^{-}(aq)+H_2O(l)\rightarrow 2OH^{-}(aq)}[/tex]. The base, acid, and spectator ions in this reaction are O²⁻, water, and potassium.

The ions that do not participate in the interaction are referred to as spectator ions. They are found in the chemical reaction's reactant and product sides. The proton donor ion is referred to as acid and the proton acceptor ion is referred to as the base.

Let's write the complete ionic equation for the reaction between potassium oxide (K₂O) and water (H₂O).

[tex]\mathrm{2K^{+}(aq)+O^{2-}(aq)+H_2O(l)\rightarrow 2 K^{+}(aq)+2OH^{-}(aq)}[/tex]

Now, the net ionic equation is written as,

[tex]\mathrm{O_2^{-}(aq)+H_2O(l)\rightarrow 2OH^{-}(aq)}[/tex]

Then, the molecular equation is,

[tex]\mathrm{K_2O(aq)+H_2O(l)\rightarrow 2 KOH(aq)}[/tex]

From the equations, we can tell the acid ion is water, the base ion is O²⁻, and the potassium ion is the spectator ion.

To know more about spectator ions:

https://brainly.com/question/22277121

#SPJ4

The complete question is -

As K₂O dissolves in water, the oxide ion reacts with water molecules to form hydroxide ions. (a) Write the molecular and net ionic equations for this reaction. (b) Based on the definitions of acid and base, what ion is the base in this reaction? (c) What is the acid in the reaction? (d) What is the spectator ion in the reaction?

The rate law for the ozonization of pentene is Rate = 8.55 x 10³[C₅H₁₀][O₃]².

Ozonization is a chemical process that involves the addition of ozone (O3) to a compound. This reaction can be used in a variety of applications, such as wastewater treatment, air purification, and organic synthesis. In organic chemistry, ozonolysis is a commonly used technique that involves the cleavage of carbon-carbon double bonds by reaction with ozone.

The rate law for the ozonation of pentene can be determined using the initial rate data given. The general form of the rate law is:

Rate = k[C₅H₁₀[tex]]^{m}[/tex][O₃]ⁿ

where k is the rate constant, m and n are the orders of the reaction with respect to C₅H₁₀ and O₃, respectively.

To determine the orders of the reaction with respect to C5H10 and O3, we can use the method of initial rates. This involves comparing the rates of the reaction under different initial concentrations of the reactants while holding the concentration of the other reactant constant. If the rate doubles when the concentration of a reactant doubles, then the reaction is first order with respect to that reactant. If the rate quadruples when the concentration of a reactant doubles, then the reaction is second order with respect to that reactant.

Using the data given, we can determine the orders of the reaction with respect to C₅H₁₀ and O₃ as follows:

For experiments 1 and 2:

Rate1/Rate2 = (k[C₅H₁₀]1[O₃]1)/(k[C₅H₁₀]1[O₃]2) = (425/849) = 0.50

[C₅H₁₀]1/[C₅H₁₀]2 = 1/1 = 1

Therefore, (k[O₃]1)/(k[O₃]2) = 0.50

O₃ is second order (n=2)

For experiments 1 and 3:

Rate1/Rate3 = (k[C₅H₁₀]1[O₃]1)/(k[C₅H₁₀]2[O₃]1) = (425/853) = 0.50

[O₃]1/[O₃]2 = 1/2 = 0.5

Therefore, (k[C₅H₁₀]1)/(k[C₅H₁₀]₂) = 1

C₅H₁₀ is first order (m=1)

Thus, the rate law for the ozonization of pentene is:

Rate = k[C₅H₁₀][O₃]²

The rate constant can be determined from any of the experiments by substituting the concentrations and initial rate into the rate law and solving for k. For example, using experiment 1:

Rate = k[C₅H₁₀][O₃]²

425 = k(0.102)(0.042)²

k = 8.55 x 10³ M⁻¹ s⁻¹

To know more about rate constant, visit:

https://brainly.com/question/20305871

#SPJ1

The precipitate that forms is lead(II) chloride (PbCl2), which is a white solid.

A chemical reaction is a process in which one or more substances are transformed into one or more different substances. During a chemical reaction, the bonds between the atoms in the reactants are broken, and new bonds are formed to create the products.

The chemical formula for lead(II) nitrate is Pb(NO3)2. When dissolved in water, it dissociates into Pb2+ and 2NO3- ions:

Pb(NO3)2 (aq) → Pb2+ (aq) + 2NO3- (aq)

If a solution of lead(II) nitrate is mixed with a solution containing chloride ions (Cl-), a precipitate of lead(II) chloride (PbCl2) will form, since lead(II) chloride is insoluble in water. The balanced chemical equation for the reaction is:

Pb(NO3)2 (aq) + 2NaCl (aq) → PbCl2 (s) + 2NaNO3 (aq)

The precipitate that forms is lead(II) chloride (PbCl2), which is a white solid.

Therefore, the  spectator ions in the reaction are Na+ and NO3-. These ions do not participate in the reaction, and they remain in solution after the reaction is complete.

Learn more about chemical reaction below.

https://brainly.com/question/11231920

#SPJ1

In the model of isostasy, the wooden block represents a landmass or a portion of the Earth's crust.

Isostasy is the equilibrium that exists between the Earth's crust and the mantle, where the crust "floats" on the denser mantle like an iceberg floats on water.

The wooden block in the beaker of water simulates the concept of buoyancy. The block displaces an amount of water equal to its own weight, which means that the block's weight is supported by the upward buoyant force of the water. This is similar to how the Earth's crust is supported by the denser mantle below it.

By adding weights to the wooden block, the student can simulate the effects of additional mass or load on the Earth's crust, which can cause it to sink or rise relative to the mantle. This model helps to demonstrate the dynamic equilibrium that exists between the Earth's crust and mantle, and how changes to one can affect the other.

Learn more about isostasy:

brainly.com/question/17119128

#SPJ4

If 5.00cm³ of 0.20mol/L Na[tex]_2[/tex]CO[tex]_3[/tex] was diluted with distilled water to obtain 250cm³ solution. 0.64 mol/L is the concentration of the resulting solution.

Concentration in chemistry refers to the quantity of a material in a certain area. The ratio of the solute in the solution to the solvent or whole solution is another way to define concentration.

In order to indicate concentration, mass every unit volume is typically used. The solute concentration can, however, alternatively be stated in moles or volumetric units. Concentration may be expressed as per unit mass rather than volume.

Concentration₁×volume₁=concentration₂×volume₂

0.20×5.00=concentration₂×250

concentration₂= 0.64 mol/L

Therefore, 0.64 mol/L is the concentration of the resulting solution.

To know more about concentration, here:

https://brainly.com/question/30462414

#SPJ9

The calorific value of the candle is 40 J/g.

The calorific value (CV) of the candle is the amount of heat energy released when 1 kg of the candle is burned.

To calculate the CV, first convert the mass of the candle burnt from kg to g:

4.5 kg = 4500 g

Next, use the formula:

CV = Heat produced / Mass of candle burnt

where heat produced is in joules and mass of candle burnt is in grams.

First, let's convert the heat produced from kJ to J:

180.000 kJ = 180000 J

Now calculate the CV:

CV = 180000 J / 4500 g

CV = 40 J/g

Therefore, the calorific value of the candle is 40 J/g.

Learn more on calorific value here: https://brainly.com/question/13099448

#SPJ1

Filtration is a technique that uses a porous barrier to separate a solid from a liquid in a heterogeneous mixture.

To convert propane to butan-2-ol, follow a multi-step synthesis, which is specified below.

It is a chemical strategy where a series of chemical reactions are employed  to synthesize a desired compound from the provided substrate.

Here's how we can synthesize butan-2-ol from propane:

                                         C₃H₈ + 2[O] → CH₃CH₂CH₂O

                                       CH₃CH₂CH₂OH → CH₃CH=CH₂+ H₂O

                                       CH₃CH=CH₂ + H₂ → CH₃CH₂CH₃

                                     C₄H₁₀+ 3[O] → CH₃COCH₂CH₃ + H₂O

                                 CH₃COCH₂CH₃ + 2[H] → CH₃CH(OH)CH₂CH₃

So the overall reaction would be:

C₃H₈ + 5[O] + 2[H] → CH₃CH(OH)CH₂CH₃

Learn more about multi-step synthesis, here:

https://brainly.com/question/29875270

#SPJ1

The empirical formula of the compound is C2H0O0N0S0, or C2H0NS.

The empirical formula is a type of chemical formula that gives the simplest whole number ratio of atoms present in a molecule. It is the simplest type of formula that indicates the type of atoms and the ratio of atoms present in a molecule, rather than the actual number of atoms. For example, the empirical formula of glucose is CH₂O, which tells us that there is one carbon atom, two hydrogen atoms and one oxygen atom present in each molecule of glucose.

The empirical formula can be determined by finding the ratio of the mass of each element from the combustion of each sample.

Sample 1:

C: 3.93 g/12.01 g/mol = 0.3283 mol

H: 0.674 g/1.008 g/mol = 0.6689 mol

O: 5.50 g/15.999 g/mol = 0.3441 mol

N: 0 mol

S: 0 mol

Sample 2:

C: 6.32 g/12.01 g/mol = 0.5267 mol

H: 0 mol

O: 0 mol

N: 0 mol

S: 3.22 g/32.06 g/mol = 0.1001 mol

Sample 3:

C: 8.93 g/12.01 g/mol = 0.7417 mol

H: 3.58 g/1.008 g/mol = 3.5479 mol

O: 0 mol

N: 0.674 g/14.007 g/mol = 0.0481 mol

S: 0 mol

The ratio of the moles of each element can be determined by taking the moles of each element from sample 1, and dividing them by the moles of the respective element from sample 2 and 3:

C: 0.3283 / 0.5267 = 0.625

H: 0.6689 / 3.5479 = 0.189

O: 0.3441 / 0 = undefined

N: 0 / 0.0481 = 0

S: 0 / 0.1001 = 0

Rounding the ratios, we get C: 2, H: 0, O: 0, N: 0, and S: 0.

The empirical formula of the compound is C2H0O0N0S0, or C2H0NS.

To learn more about empirical formula
https://brainly.com/question/1603500
#SPJ1

The release of heat energy and the formation of water (H2O) indicate a release of bond energy.

Heat energy is the energy transferred between two objects or systems that have different temperatures. It is a form of energy that is created when molecules move faster, creating kinetic energy in the form of heat. Heat energy is transferred by conduction, convection, and radiation. Conduction is the transfer of heat energy through direct contact between two objects. Convection is the transfer of heat energy through the movement of a fluid, such as air or water. Radiation is the transfer of heat energy through electromagnetic waves. Heat energy is used in many applications, including cooking, heating, and power generation.

To learn more about heat energy
https://brainly.com/question/19666326
#SPJ1

Answer:

the concentration of the sodium chloride solution is 0.34 mmol/L, rounded to two significant digits.

Explanation:

To calculate the concentration of the sodium chloride solution, we first need to convert the amount of NaCl from micromoles (umol) to moles (mol) using the following conversion factor:

1 umol = 1 × 10^-6 mol

So, 68. umol of NaCl is equal to:

umol x (1 mol / 1 × 10^6 umol) = 6.8 × 10^-5 mol

Next, we can use the formula for molarity to calculate the concentration of the solution:

Molarity = moles of solute / volume of solution in liters

The volume of the solution is given as 200. mL, or 0.200 L. Substituting the values we have calculated, we get:

Molarity = 6.8 × 10^-5 mol / 0.200 L = 0.00034 mol/L

Finally, we can convert the concentration from mol/L to mmol/L by multiplying by 1000:

0.00034 mol/L x 1000 mmol/mol = 0.34 mmol/L

Answer:

The statement is not entirely accurate.

Explanation:

While it is true that trans-1,4-dibromocyclohexane can adopt a conformation in which the two bromine atoms are in orientations that are further apart from each other, this alone does not explain why the trans isomer is more stable than the cis isomer.

The actual reason for the greater stability of the trans isomer lies in the fact that the two large bromine atoms on adjacent carbons in the cis isomer are forced into close proximity, leading to significant steric hindrance and unfavorable van der Waals interactions. This steric strain can be relieved by rotating the two C-Br bonds away from each other to form the trans isomer, which has lower energy and is more stable.

In contrast, in the trans isomer, the two bromine atoms are already far apart from each other in the lowest-energy conformation, so there is no additional steric strain that needs to be relieved.

Therefore, it is not accurate to say that the trans isomer is more stable simply because it can adopt a conformation with both bromine atoms in favorable orientations. The trans isomer is more stable because it has lower steric strain due to the orientation of the two bromine atoms relative to each other.

19.5 g of water will produce 12.24 L of oxygen gas at STP.

Spanning Tree Protocol (STP) is an industry standard protocol developed by IEEE to prevent loops in a network. This protocol is designed to create a loop-free topology while allowing redundant links in the network. STP works by selecting a root bridge, then selecting root ports and designated ports on each switch. When two switches are connected by multiple links, STP will block all but one link to prevent loops. STP is an important protocol for network reliability, as it prevents packet loops and broadcast storms.

The balanced equation for the decomposition of water is:

2H2O --> 2H2 + O2

The molar mass of water is 18.015 g/mol. Thus, 19.5 g of water corresponds to 1.08 moles of water.

Since the equation has a 2:1 mole ratio of water to oxygen, 1.08 moles of water will produce 0.54 moles of oxygen gas.

At STP (standard temperature and pressure), 1 mole of gas occupies 22.4 L. Thus, 0.54 moles of oxygen gas will occupy 12.24 L.

To learn more about STP

https://brainly.com/question/27100414

#SPJ1

The mass percentage is an important method to determine the concentration of a solution. Here among P₂O₃ and P₂O₅, the oxide P₂O₃ contains higher percentage of phosphorous.

The mass percentage of a component can be defined as the ratio of the mass of that particular component in the compound to the total mass of the compound. It can be expressed as:

Mass percentage = Mass of the component / Total mass of the component × 100

Molar mass of P₂O₃ = 110 g/mol

Molar mass of P₂O₅ = 142 g/mol

a. % of 'P' in P₂O₃ = 2 × 31 / 110 × 100 = 56.4 %

   % of 'P' in P₂O₅ = 2 × 31 / 142 × 100 = 43.66 %

Thus P₂O₃ has higher percentage of 'P'.

b. 1 mol O₂ × 4 P /3 O₂ × 31.0 P / 1 mol P = 41.3 g P

c. P₄O₁₀

d. Aluminium oxide - Al₂O₃

To know more about mass percentage, visit;

https://brainly.com/question/8339943

#SPJ9

A physical property of both liquids and gases has randomly arranged particles.

The smallest of particles are the subatomic particles, which refer to particles smaller than atoms. These would include particles such as the constituents of atoms – protons, neutrons, and electrons – as well as other types of particles which can only be produced in particle accelerators or cosmic rays.

Background. Subatomic particles are created naturally with sufficient energy, but many more types of particles are manufactured in high-energy particle physics experiments such as CERN. Most of the particles live for a fraction of a second, decaying to become other particles that are more common in the universe.

To know more about particles visit

https://brainly.com/question/2288334

#SPJ1

Assuming that the volume of the tyre does not change, and that air behaves as an ideal gas, find the gauge pressure of the air in the tyre.

What is volume ?

Volume is nothing but the quantity of area the container fills or holds. Volume is always in a dimensional space, especially three. A solid always has a definite shape. Volume is anything to be held, like solid, liquid, or gas. The volume should be in ml, l, and so on. Finding the volume to know the weight and depth of the container.

What is pressure ?

The pressure is nothing but the vital force applied to the object or particle. Pressure calculates how much force will be gone or extended to the object. Pressure is the force that is perpendicular to the power of extension. The standard unit of pressure is the pascal (pa). The formula for pressure, p= F/ A, p= pressure, F= magnitude, A= area of the surface

pressure is the scalar quantity. Pressure is also expressed in the term atmospheric pressure, atm.

Therefore, Assuming that the volume of the tyre does not change, and that air behaves as an ideal gas, find the gauge pressure of the air in the tyre.

Learn more about volume from the given link.

https://brainly.com/question/1578538

#SPJ1

The equilibrium concentration of sulfur dioxide, SO2, is 0.084 M.

Equilibrium is a state in which opposing forces or influences are balanced. It is a state of balance between opposing forces or actions in which the forces cancel each other. In economics, it is the state in which market supply and demand balance each other out and in which the prices of goods and services are stable. In physics, equilibrium is the state in which an object experiences no net force and its velocity is constant. In chemistry, equilibrium is the state in which the rates of the forward and reverse reactions are equal.

At equilibrium the reaction will be at its equilibrium constant value, K. This means that the concentration of SO2 can be determined by rearranging the equilibrium expression, K = [SO3]2/[SO2]2, and solving for [SO2].

[SO2] = sqrt([SO3]2/K)

[SO2] = sqrt((0.015)2/1.5)

[SO2] = 0.084 M

To learn more about equilibrium

https://brainly.com/question/18849238

#SPJ1

Answer: The name of the following compounds are:

a. Magnesium nitride                                                                                                 b. Potassium Fluoride                                                                                                 c. Sodium Oxide                                                                                                               d. Lithium sulfide                                                                                                        e. Cesium Fluoride                                                                                                         f. Potassium iodide

Explanation:

The name of ionic compounds, Mg₃N₂ is magnesium nitride, KF is potassium fluoride, Na₂O is sodium oxide, Li₂S is lithium sulfide, CsF is cesium fluoride, and KI is potassium iodide.

Ionic compounds are compounds that are formed through the combination of positive and negative ions. They consist of a metal cation and a nonmetal anion. These compounds are held together by electrostatic forces, known as ionic bonds, resulting from the attraction between opposite charges.

The names of ionic compounds are often derived from the names of the constituent ions.

Learn more about ionic compounds, here:

https://brainly.com/question/30420333

#SPJ6

The mass of the baking soda is 4.5 g

A conversion factor is a ratio that is used to convert one unit of measurement to another. Conversion factors are commonly used in scientific calculations and in everyday life, when we need to convert one unit of measurement to another.

A conversion factor can be derived from the relationship between two different units of measurement.

Given that;

1 oz = 28.35 g

But

1 tsp = 0.212 oz

Thus;

0.750 tsp will be  0.750 tsp * 0.212 oz/1 tsp

= 0.159 oz

Then;

1 oz = 28.35 g

Thus;

0.159 oz =  0.159 oz * 28.35 g/ 1oz

= 4.5 g

Learn more about conversion factor:https://brainly.com/question/30166433

#SPJ1

After the reaction is finished, N2 has a partial pressure of 0.995 atm.

Provide three strategies for accelerating a chemical reaction. providing heat, increasing the reactants' surface area or concentration, or adding a catalyst are all ways to raise the temperature.

A catalyst is a chemical that can be included in a reaction to speed up the process without being consumed. Catalysts typically reduce a process's activation energy or change its mechanism. Proteins called enzymes serve as catalysts in biological reactions.

To know more about partial pressure visit:-

https://brainly.com/question/16749630

#SPJ1